1 _________________. __________

: __________________________

( ) : __________________

: ________________________

1

(.) ( ),

1.API - American Petroleum Institute3065 -

2.ASTM - American Society of Testing & Materials950

3.AccountAbility AA 1000 Series1

4.ACI - American Concrete Institute36

ACI 117 ERTA Specification for Tolerances for Concrete Construction and Materials (ACI 117-10) and Commentary

ACI 117 Specification for Tolerances for Concrete Construction and Materials (ACI 117-10) and Commentary

ACI 122R Guide to Thermal Properties of Concrete and Masonry Systems

ACI 207.1R Guide to Mass Concrete

ACI 210R Erosion of Concrete in Hydraulic Structures

ACI 211.1 Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete

ACI 212.3R Report on Chemical Admixtures for Concrete

ACI 223R Guide for the Use of Shrinkage-Compensating Concrete

ACI 301 ERTA Specifications for Structural Concrete

ACI 301 Specifications for Structural Concrete

ACI 302.1R Guide for Concrete Floor and Slab Construction - Incorporates Errata: 3/18/2006 and Errata: 2/23/2007

ACI 304R Guide for Measuring, Mixing, Transporting, and Placing Concrete

ACI 305R Guide to Hot Weather Concreting

ACI 306.1 Standard Specification for Cold Weather Concreting

ACI 306R Guide to Cold Weather Concreting

ACI 308.1 Specification for Curing Concrete

ACI 308R Guide to Curing Concrete

ACI 311.5 Guide for Concrete Plant Inspection and Testing of Ready-Mixed Concrete

ACI 318 ERTA Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary

ACI 318 ERTA Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary

ACI 318 ERTA Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary

ACI 318 Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary

ACI 318 SPANISH Requisitos de Reglamento para Concreto Estructural (ACI 318S-11) y Comentario

ACI 318M ERTA Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary

ACI 318M Building Code Requirements for Structural Concrete (ACI 318M-11) and Commentary

ACI 336.1 Specification for the Construction of Drilled Piers

ACI 336.2R Suggested Analysis and Design Procedures for Combined Footings and Mats

ACI 349 Code Requirements for Nuclear Safety-Related Concrete Structures (ACI 349-13) and Commentary

ACI 350.1 Specification for Tightness Testing of Environmental Engineering Concrete Containment Structures (ACI 350.1-10) and Commentary

ACI 350 ERTA Code Requirements for Environmental Engineering Concrete Structures and Commentary

ACI 350 ERTA CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY

ACI 350 CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY

ACI 363R Report on High-Strength Concrete

ACI 506.1R Guide to Fiber-Reinforced Shotcrete

ACI 506.2 Specification for Shotcrete

ACI 543R Guide to Design, Manufacture, and Installation of Concrete Piles

5.DNV - Det Norsk Veritas190

DNV 1.1 General Description of The CMC - Services

DNV 1.2 Type Approval

DNV 2.4 ENVIRONMENTAL TEST SPECIFICATION FOR INSTRUMENTATION AND AUTOMATION EQUIPMENT

DNV 2.7-1 Offshore Containers

DNV 2.7-2 Offshore Service Modules

DNV 2.7-3 PORTABLE OFFSHORE UNITS - Includes Amendments: June 2011

DNV 2.7-4 FREIGHT CONTAINERS

DNV 2.10 DIESEL ENGINE DRIVEN POWER PLANTS - CERTIFICATION, TESTING AND INSPECTION

DNV 2.11 GAS BURNING INTERNAL COMBUSTION ENGINE INSTALLATIONS

DNV 2.12 Type Approval of Marine Equipment on behalf of Maritime and Coastguard Agency (MCA), UK

DNV 2.14 MARITIME SIMULATOR SYSTEMS

DNV 2.15 ENGINE INTERNATIONAL AIR POLLUTION PREVENTION (EIAPP) - CERTIFICATION ACCORDING TO MARPOL ANNEX VI, REG. 13 AND THE NOX TECHNICAL CODE

DNV 2.16 SPECIFICATION FOR REDUNDANCY IN POSITION KEEPING ABILITY

DNV 2.19 CERTIFICATION OF PORTABLE FIRE EXTINGUISHERS FOR THE NORWEGIAN MARKET

DNV 2.20 LIFEBOATS AND RESCUE BOATS

DNV 2.21 CRAFT

DNV 2.22 Lifting Appliances

DNV 2.23 Container Securing Devices

DNV 2.24 Hardware in the Loop Testing (HIL)

DNV 2.25 Electrical Shore Connections / Cold Ironing

DNV 3.101 COMPETENCE MANAGEMENT SYSTEMS

DNV 3.201 LEARNING PROGRAMMES

DNV 3.301 COMPETENCE OF SHIPS SUPERINTENDENTS

DNV 3.302 COMPETENCE OF SHIPBOARD LNG CARGO OPERATORS

DNV 3.303 STCW BASIC SAFETY FOR SEAFARERS

DNV 3.304 Competence of Ships Electrical Officers and Engineers

DNV 3.305 Competence of Shore-side Personnel Handling Dangerous Goods

DNV 3.306 Competence of Ships' Officers for Hull Inspections

DNV 3.307 Ship-handling Competence Requirements for Berthing and Un-berthing Large Vessels

DNV 3.310 COMPETENCE OF TENDER OPERATORS

DNV 3.312 Competence of Officers for Navigation in Ice

DNV 3.317 Competence of Shipboard Cargo Operators Crude Oil Tankers

DNV 3.318 Competence of shipboard Cargo Operators Product Tankers

DNV 3.319 Competence of Shipboard Cargo Operators Chemical Tankers

DNV 3.320 Competence of Fast Rescue Boat Operators

DNV 3.321 Competence of Lifeboat Coxswains

DNV 3.322 Competence of Dynamic Positioning Operators (DPO)

DNV 3.323 Competence of Maritime Teaching Professionals

DNV 3.324 Competence of Maritime Simulator Instructors

DNV 3.325 Competence Related to the On Board Use of LNG as Fuel

DNV 3.326 Competence Requirements Related to Anchor Handling Operations

DNV 3.327 Competence related to the use of Remotely Sensed Earth Observation Data on Board Vessels

DNV 3.403 Maritime Training Providers

DNV 3.404 CREW MANNING OFFICES, PRIVATE RECRUITMENT AND PLACEMENT SERVICES

DNV 3.405 Pilot Organisations

DNV 3.406 Test Centre for Certification of Personnel

DNV 4.1 MANAGEMENT SYSTEMS FOR SAFE AND ENVIRONMENTALLY SOUND SHIP RECYCLING FACILITIES

DNV DNV-DS-E403 Standard for Surface Diving Systems

DNV DNV-DS-J102 DESIGN AND MANUFACTURE OF WIND TURBINE BLADES, OFFSHORE AND ONSHORE WIND TURBINES - Incorporates Amendment: November 2010

DNV DNV-DSS-105 Rules for Classification of Diving Systems

DNV DNV-DSS-314 Verification of Hydrocarbon Refining and Petrochemical Facilities - Incorporates Amendment: April 2012

DNV DNV-DSS-315 Verification of Onshore LNG and Gas Facilities - Incorporates Amendment: April 2012

DNV DNV-DSS-316 Verification of Onshore Pipelines - Incorporates Amendment: January 2014

DNV DNV-DSS-401 TECHNOLOGY QUALIFICATION MANAGEMENT

DNV DNV-DSS-402 Qualification Management for Geological Storage of CO2 - Incorporates Amendment: July 2013

DNV DNV-DSS-904 Type Certification of Wind Turbines

DNV DNV-OS-A101 Safety Principles and Arrangements

DNV DNV-OS-A201 Winterization for Cold Climate Operations (Tentative)

DNV DNV-OS-B101 Metallic Materials

DNV DNV-OS-C101 DESIGN OF OFFSHORE STEEL STRUCTURES, GENERAL (LRFD METHOD)

DNV DNV-OS-C102 Structural Design of Offshore Ships

DNV DNV-OS-C103 Structural Design of Column Stabilised Units (LRFD Method)

DNV DNV-OS-C104 STRUCTURAL DESIGN OF SELF-ELEVATING UNITS (LRFD METHOD)

DNV DNV-OS-C105 STRUCTURAL DESIGN OF TLPS (LRFD METHOD)

DNV DNV-OS-C106 Structural Design of Deep Draught Floating Units (LRFD Method)

DNV DNV-OS-C201 Structural Design of Offshore Units (WSD Method)

DNV DNV-OS-C301 Stability and Watertight Integrity

DNV DNV-OS-C401 Fabrication and Testing of Offshore Structures

DNV DNV-OS-C501 Composite Components

DNV DNV-OS-C502 Offshore Concrete Structures

DNV DNV-OS-C503 CONCRETE LNG TERMINAL STRUCTURES AND CONTAINMENT SYSTEMS

DNV DNV-OS-D101 Marine and Machinery Systems and Equipment

DNV DNV-OS-D201 Electrical Installations

DNV DNV-OS-D202 Automation, Safety and Telecommunication Systems - Incorporates Amendment: February 2014

DNV DNV-OS-D203 Integrated Software Dependent Systems (ISDS)

DNV DNV-OS-D301 Fire Protection

DNV DNV-OS-E101 DRILLING PLANT

DNV DNV-OS-E201 Oil and Gas Processing Systems

DNV DNV-OS-E301 Position Mooring

DNV DNV-OS-E302 Offshore Mooring Chain

DNV DNV-OS-E303 Offshore Fibre Ropes

DNV DNV-OS-E304 OFFSHORE MOORING STEEL WIRE ROPES - Amended October 2009

DNV DNV-OS-E401 Helicopter Decks

DNV DNV-OS-E402 OFFSHORE STANDARD FOR DIVING SYSTEMS

DNV DNV-OS-E403 OFFSHORE LOADING BUOYS

DNV DNV-OS-E406 DESIGN OF FREE FALL LIFEBOATS

DNV DNV-OS-E407 Underwater Deployment and Recovery Systems

DNV DNV-OS-F101 Submarine Pipeline Systems

DNV DNV-OS-F201 DYNAMIC RISERS

DNV DNV-OS-H101 Marine Operations, General

DNV DNV-OS-H102 Marine Operations, Design and Fabrication

DNV DNV-OS-H201 Load Transfer Operations

DNV DNV-OS-H203 Transit and Positioning of Offshore Units

DNV DNV-OS-H204 Offshore Installation Operations (VMO Standard Part 2-4)

DNV DNV-OS-H205 Lifting Operations (VMO Standard - Part 2-5)

DNV DNV-OS-J101 Design of Offshore Wind Turbine Structures - Incorporates Amendment: February 2013

DNV DNV-OS-J103 Design of Floating Wind Turbine Structures

DNV DNV-OS-J201 OFFSHORE SUBSTATIONS FOR WIND FARMS

DNV DNV-OS-J301 Wind Turbine Installation Units - Incorporates Amendment: February 2014

DNV DNV-OSS-101 Rules for Classification of Offshore Drilling and Support Units

DNV DNV-OSS-102 Rules for Classification of Floating Production, Storage and Loading Units

DNV DNV-OSS-103 Rules for Classification of Floating LNG/LPG Production, Storage and Loading Units

DNV DNV-OSS-104 Rules for Classification of Self-Elevating Units

DNV DNV-OSS-121 Classification Based on Performance Criteria Determined from Risk Assessment Methodology - Incorporates Amendment: October 2011

DNV DNV-OSS-201 Verification for Compliance with Norwegian Shelf Regulations

DNV DNV-OSS-202 Verification for Compliance with UK Shelf Regulations - Incorporates Amendment: October 2011

DNV DNV-OSS-300 RISK BASED VERIFICATION - Incorporates Amendment: April 2012

DNV DNV-OSS-301 Verification and Certification of Submarine Pipelines

DNV DNV-OSS-302 Offshore Riser Systems - Incorporates Amendment: April 2012

DNV DNV-OSS-304 Risk Based Verification of Offshore Structures - Incorporates Amendment: April 2012

DNV DNV-OSS-306 VERIFICATION OF SUBSEA FACILITIES - Incorporates Amendment: April 2012

DNV DNV-OSS-307 VERIFICATION OF PROCESS FACILITIES - Incorporates Amendment: April 2012

DNV DNV-OSS-308 Verification of Lifting Appliances for the Oil and Gas Industry - Incorporates Amendment: April 2012

DNV DNV-OSS-312 Certification of Tidal and Wave Energy Converters - Incorporates Amendment: April 2012

DNV DNV-OSS-313 Pipe Mill and Coating Yard - Qualification - Incorporates Amendment: October 2011

DNV DNV-OSS-901 Project Certification of Offshore Wind Farms

DNV DNV-RP-A201 Plan Approval Documentation Types - Definitions

DNV DNV-RP-A203 Technology Qualification

DNV DNV-RP-A204 Quality Survey Plan (QSP) for Offshore Class New-building Surveys

DNV DNV-RP-A205 Offshore Classification Projects - Testing and Commissioning

DNV DNV-RP-B101 CORROSION PROTECTION OF FLOATING PRODUCTION AND STORAGE UNITS

DNV DNV-RP-B401 CATHODIC PROTECTION DESIGN - Incorporates Amendment: April 2011

DNV DNV-RP-C101 Thickness Diminution for Mobile Offshore Units

DNV DNV-RP-C102 Structural Design of Offshore Ships

DNV DNV-RP-C103 Column-Stabilised Units

DNV DNV-RP-C104 Self-elevating Units

DNV DNV-RP-C201 BUCKLING STRENGTH OF PLATED STRUCTURES

DNV DNV-RP-C202 BUCKLING STRENGTH OF SHELLS

DNV DNV-RP-C203 Fatigue Design of Offshore Steel Structures

DNV DNV-RP-C204 DESIGN AGAINST ACCIDENTAL LOADS

DNV DNV-RP-C205 Environmental Conditions and Environmental Loads

DNV DNV-RP-C206 Fatigue Methodology of Offshore Ships

DNV DNV-RP-C207 Statistical Representation of Soil Data

DNV DNV-RP-C208 Determination of Structural Capacity by Non-linear FE analysis Methods

DNV DNV-RP-C301 Design, Fabrication, Operation and Qualification of Bonded Repair of Steel Structures

DNV DNV-RP-C302 Risk Based Corrosion Management

DNV DNV-RP-D101 STRUCTURAL ANALYSIS OF PIPING SYSTEMS

DNV DNV-RP-D102 Failure Mode and Effect Analysis (FMEA) of Redundant Systems

DNV DNV-RP-D201 INTEGRATED SOFTWARE DEPENDENT SYSTEMS

DNV DNV-RP-D202 Witnessing of Low Sulphur Fuel Changeover and Operations

DNV DNV-RP-E101 Recertification of Well Control Equipment for the Norwegian Continental Shelf

DNV DNV-RP-E102 RECERTIFICATION OF BLOWOUT PREVENTERS AND WELL CONTROL EQUIPMENT FOR THE US OUTER CONTINENTAL SHELF

DNV DNV-RP-E301 Design and Installation of Fluke Anchors

DNV DNV-RP-E302 DESIGN AND INSTALLATION OF PLATE ANCHORS IN CLAY

DNV DNV-RP-E303 GEOTECHNICAL DESIGN AND INSTALLATION OF SUCTION ANCHORS IN CLAY

DNV DNV-RP-E304 DAMAGE ASSESSMENT OF FIBRE ROPES FOR OFFSHORE MOORING

DNV DNV-RP-E306 Dynamic Positioning Vessel Design Philosophy Guidelines

DNV DNV-RP-E307 DYNAMIC POSITIONING SYSTEMS - OPERATION GUIDANCE

DNV DNV-RP-E401 SURVEY OF DIVING SYSTEMS

DNV DNV-RP-E402 NAVAL RESCUE SUBMERSIBLES

DNV DNV-RP-E403 HYPERBARIC EVACUATION SYSTEMS

DNV DNV-RP-F101 CORRODED PIPELINES

DNV DNV-RP-F102 PIPELINE FIELD JOINT COATING AND FIELD REPAIR OF LINEPIPE COATING

DNV DNV-RP-F103 CATHODIC PROTECTION OF SUBMARINE PIPELINES BY GALVANIC ANODES

DNV DNV-RP-F105 Free Spanning Pipelines

DNV DNV-RP-F106 FACTORY APPLIED EXTERNAL PIPELINE COATINGS FOR CORROSION CONTROL

DNV DNV-RP-F107 RISK ASSESSMENT OF PIPELINE PROTECTION

DNV DNV-RP-F108 FRACTURE CONTROL FOR PIPELINE INSTALLATIONS METHODS INTRODUCING CYCLIC PLASTIC STRAIN

DNV DNV-RP-F109 On-Bottom Stability Design of Submarine Pipelines - Incorporates Amendment: November 2011

DNV DNV-RP-F110 GLOBAL BUCKLING OF SUBMARINE PIPELINES STRUCTURAL DESIGN DUE TO HIGH TEMPERATURE/HIGH PRESSURE

DNV DNV-RP-F111 INTERFERENCE BETWEEN TRAWL GEAR AND PIPELINES

DNV DNV-RP-F112 DESIGN OF DUPLEX STAINLESS STEEL SUBSEA EQUIPMENT EXPOSED TO CATHODIC PROTECTION

DNV DNV-RP-F113 PIPELINE SUBSEA REPAIR

DNV DNV-RP-F116 INTEGRITY MANAGEMENT OF SUBMARINE PIPELINE SYSTEMS

DNV DNV-RP-F118 PIPE GIRTH WELD AUT SYSTEM QUALIFICATION AND PROJECT SPECIFIC PROCEDURE VALIDATION

DNV DNV-RP-F201 DESIGN OF TITANIUM RISERS

DNV DNV-RP-F202 COMPOSITE RISERS

DNV DNV-RP-F203 RISER INTERFERENCE

DNV DNV-RP-F204 RISER FATIGUE

DNV DNV-RP-F205 GLOBAL PERFORMANCE ANALYSIS OF DEEPWATER FLOATING STRUCTURES

DNV DNV-RP-F206 RISER INTEGRITY MANAGEMENT

DNV DNV-RP-F301 SUBSEA SEPARATOR STRUCTURAL DESIGN

DNV DNV-RP-F302 SELECTION AND USE OF SUBSEA LEAK DETECTION SYSTEMS

DNV DNV-RP-F401 Electrical Power Cables in Subsea Applications

DNV DNV-RP-G101 RISK BASED INSPECTION OF OFFSHORE TOPSIDES STATIC MECHANICAL EQUIPMENT

DNV DNV-RP-G103 NON-INTRUSIVE INSPECTION

DNV DNV-RP-H101 RISK MANAGEMENT IN MARINE - AND SUBSEA OPERATIONS

DNV DNV-RP-H102 MARINE OPERATIONS DURING REMOVAL OF OFFSHORE INSTALLATIONS

DNV DNV-RP-H103 Modelling and Analysis of Marine Operations

DNV DNV-RP-H104 Ballast, Stability, and Watertight Integrity - Planning and Operating Guidance

DNV DNV-RP-J101 Use of Remote Sensing for Wind Energy Assessments - Incorporates Amendment: November 2011

DNV DNV-RP-J201 QUALIFICATION PROCEDURES FOR CO2 CAPTURE TECHNOLOGY

DNV DNV-RP-J202 DESIGN AND OPERATION OF CO2 PIPELINES

DNV DNV-RP-J203 Geological Storage of Carbon Dioxide - Incorporates Amendment: July 2013

DNV DNV-RP-J301 Subsea Power Cables in Shallow Water Renewable Energy Applications

DNV DNV-RP-O401 Safety and Reliability of Subsea Systems

DNV DNV-RP-O501 EROSIVE WEAR IN PIPING SYSTEMS - Revision 4.2; Incorporates Amendment: January 2011

DNV DNV-RP-O501 CD Erosive Software in Piping Systems - Revision 4.2; To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide

DNV DNV-RP-U301 Risk Management of Shale Gas Developments and Operations

DNV SUMMARY OF CHANGES Summary of Changes and Current Document Status

6.AGA - American Gas Association5

AGA REPORT 3-1

AGA REPORT 3-2

AGA REPORT 3-3

AGA REPORT 3-4

AGA REPORT 8

7.MSS - Manufacturers Standardization Society21

MSS SP-6 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings

MSS SP-9 Spot Facing for Bronze, Iron, and Steel Flanges

MSS SP-25 Standard Marking System for Valves, Fittings, Flanges, and Unions

MSS SP-43 Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications

MSS SP-44 Steel Pipeline Flanges - Includes Errata: May 20, 2011

MSS SP-45 Bypass and Drain Connections

MSS SP-53 Quality Standard for Steel Castings and Forgings for Valves, Flanges, Fittings, and Other Piping Components - Magnetic Particle Examination Method

MSS SP-54 Quality Standard for Steel Castings for Valves, Flanges, Fittings, and Other Piping Components - Radiographic Examination Method

MSS SP-55 Quality Standard for Steel Castings for Valves, Flanges, Fittings, and Other Piping Components - Visual Method for Evaluation of Surface Irregularities

MSS SP-58 Pipe Hangers and Supports Materials, Design, Manufacture, Selection, Application, and Installation - SP-58-2009 incorporates contents of ANSI/MSS SP-69-2003, MSS SP-77-1995 (R 2000), MSS SP-89-2003, and SP-90-2000

MSS SP-67 Butterfly Valves

MSS SP-70 Gray Iron Gate Valves, Flanged and Threaded Ends

MSS SP-71 Gray Iron Swing Check Valves, Flanged and Threaded Ends - Incorporates Errata: February 22, 2013

MSS SP-72A Ball Valves with Flanged or Butt-Welding Ends for General Service

MSS SP-75 Specification for High-Test, Wrought, Butt-Welding Fittings

MSS SP-79 Socket Welding Reducer Inserts

MSS SP-80 Bronze Gate, Globe, Angle, and Check Valves

MSS SP-83 Class 3000 Steel Pipe Unions Socket Welding and Threaded

MSS SP-85 Gray Iron Globe and Angle Valves, Flanged and Threaded Ends

MSS SP-95 Swage(d) Nipples and Bull Plugs

MSS SP-97 Integrally Reinforced Forged Branch Outlet Fittings Socket Welding, Threaded, and Buttwelding Ends

8.EEMUA - Engineering Equipment Material Users Association64

EEMUA PUB NO 101 Lifting Points A Design Guide - Edition 2

EEMUA PUB NO 104 Noise A Guide to Information Required from Equipment Vendors

EEMUA PUB NO 105 Factory Stairways, Ladders and Handrails including Access Platforms and Ramps - Edition 8

EEMUA PUB NO 133 Specification for underground armoured cable Protected against solvent penetration and corrosive attack - Edition 2

EEMUA PUB NO 138 Design and installation of On-line analyser systems - Edition 2

EEMUA PUB NO 138 S1 Design and Installation of On-Line Analyser Systems - A Guide to Technical Enquiry and Bid Evaluation

EEMUA PUB NO 140 Noise Procedure Specification - Edition 3

EEMUA PUB NO 141 Guide to the Use of Noise Procedure Specification - Formerly OCMA Publication No. NWG 3, Revision 2

EEMUA PUB NO 143 Recommendations for Tube End Welding: Tubular Heat Transfer Equipment (Part 1 - Ferrous Materials) - Formerly OCMA Specification No. TEW 1

EEMUA PUB NO 144 90/10 Copper Nickel Alloy Piping for Offshore Applications - Specification: Tubes Seamless and Welded

EEMUA PUB NO 145 90/10 Copper Nickel Alloy Piping for Offshore Applications - Specification: Flanges Composite and Solid

EEMUA PUB NO 146 90/10 Copper Nickel Alloy Piping for Offshore Applications - Specification: Fittings

EEMUA PUB NO 147 Recommendations for the Design and Construction of Refrigerated Liquefied Gas Storage Tanks

EEMUA PUB NO 148 Reliability Specification - Model Clauses for Inclusion in Purchasing Specifications for Equipment Items and Packages

EEMUA PUB NO 149 Code of Practice for the Identification and Checking of Materials of Construction in Pressure Systems in Process Plants

EEMUA PUB NO 151 Liquid Ring Vacuum Pumps and Compressors - Incorporates Amendment: May 2002

EEMUA PUB NO 154 GUIDANCE TO OWNERS ON DEMOLITION OF VERTICAL CYLINDRICAL STEEL STORAGE TANKS AND STORAGE SPHERES - Second Edition

EEMUA PUB NO 155 Standard Test Method for Comparative Performance of Flammable Gas Detectors Against Poisoning

EEMUA PUB NO 158 Construction Specification for fixed offshore structures - Edition 3

EEMUA PUB NO 159 Above ground flat bottomed storage tanks A guide to inspection, maintenance and repair - 4th Edition

EEMUA PUB NO 161 Guide to the Selection and Assessment of Silencers and Acoustic Enclosers

EEMUA PUB NO 164 Seal-Less Centrifugal Pumps: Class 1 - Incorported Amendment: May 23,2002

EEMUA PUB NO 168 A guide to the pressure testing of in-service pressurised equipment - Edition 2

EEMUA PUB NO 175 EEMUA Code of Practice Calibration and validation of process analysers - Edition 2

EEMUA PUB NO 176 Specification for Structural Castings for Use Offshore

EEMUA PUB NO 177 Guide to the UK Pressure Systems Safety Regulations (2000) - Edition 2

EEMUA PUB NO 178 A Design Guide for the Electrical Safety of Instruments, Instrument/Control Panels and Control Systems - Edition 2

EEMUA PUB NO 179 A Working Guide for Carbon Steel Equipment in Wet H2S Service (Developed Largely from Oil Refinery Experience)

EEMUA PUB NO 180 Frangible Roof Joints for Fixed Roof Storage Tanks: Guide for designers and users - Edition 2

EEMUA PUB NO 181 A GUIDE TO RISK BASED ASSESSMENTS OF in situ LARGE Ex 'e' and Ex 'N' MACHINES - Errata

EEMUA PUB NO 182 SPECIFICATION FOR INTEGRAL BLOCK AND BLEED VALVE MANIFOLDS FOR DIRECT CONNECTION TO PIPEWORK - INCORPORATING INFORMATION SHEET NO 20: APPLICATION GUIDELINES; 2nd EDITION; Corrigenda: June 2004

EEMUA PUB NO 183 Prevention of tank bottom leakage A guide for the design and repair of foundations and bottoms of vertical, cylindrical, steel storage tanks - Edition 2

EEMUA PUB NO 184 Guide to the Isolation of Pressure Relieving Devices - Edition 2

EEMUA PUB NO 185 Guide for hot tapping on piping and other equipment - Edition 2

EEMUA PUB NO 186 A Practitioner's Handbook for Electrical Installation, Inspection and Maintenance in Potentially Explosive Atmospheres - Edition 5 * NO LONGER AVAILABLE

EEMUA PUB NO 187 Analyser systems A guide to maintenance management - Edition 2

EEMUA PUB NO 188 Guide for establishing Operating Periods of Safety Valves - Edition 2

EEMUA PUB NO 189 A Guide to Fieldbus Application for the Process Industry

EEMUA PUB NO 190 Guide for the Design, Construction and Use of Mounded Horizontal Cylindrical Vessels for Pressurised Storage of LPG at Ambient Temperatures - Incorporating Errata: October 2003; Amendment No 1: November 2004; Reprinted 2005

EEMUA PUB NO 191 Alarm Systems - A Guide to Design, Management and Procurement - Edition 3

EEMUA PUB NO 192 Guide for the Procurement of Valves for Low Temperature (Non-Cryogenic) Service

EEMUA PUB NO 193 EEMUA Recommendations for the Training, Development, and Competency Assessment of Inspection Personnel - Edition 2

EEMUA PUB NO 194 Guidelines for materials selection and corrosion control for subsea oil and gas production equipment - Edition 3

EEMUA PUB NO 196 Valve Purchasers' Guide to the European Pressure Equipment Directive - Amendment No. 1: 11/2000; Amendment No 2: 2/2002; Amendment No 3: 8/2002; Erratum: 8/2002

EEMUA PUB NO 199 On-Line Leak Sealing of Piping: Guide to Safety Considerations - Amendment 1: 11/2002

EEMUA PUB NO 200 Guide to the Specification, Installation and Maintenance of Spring Supports for Piping

EEMUA PUB NO 201 Process plant control desks utilising Human-Computer Interfaces - Edition 2

EEMUA PUB NO 204 PIPING AND THE EUROPEAN PRESSURE EQUIPMENT DIRECTIVE: GUIDANCE FOR PLANT OWNERS/OPERATORS - Release: Version 1

EEMUA PUB NO 205 Production Testing of Valves for the Energy, Process and related Industries

EEMUA PUB NO 206 Risk Based Inspection A Guide to Effective Use of the RBI Process

EEMUA PUB NO 207 Double Concrete Tanks for Liquefied Gas Guide to Design, Construction and Operation - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide

EEMUA PUB NO 208 Guide to life-cycle management of Pressure relief systems - Edition 1

EEMUA PUB NO 211 Guidance on the specification of Pressure vessels - Edition 2

EEMUA PUB NO 213 Emission reduction from oil storage tanks and loading operations - Edition 1

EEMUA PUB NO 215 Design, Maintenance and Operation of Industrial Cooling Tower Fans and Fin Fans - Edition 1

EEMUA PUB NO 217 Safe and effective operation of storage tanks for oil movements - Edition 1

EEMUA PUB NO 218 Quality requirements for the manufacture and supply of duplex stainless steels - Edition 1

EEMUA PUB NO 222 Guide to the Application of IEC 61511 to safety instrumented systems in the UK process industries - Edition 1*NO CD INCLUDED-CD IS SAME AS DOCUMENT*

EEMUA PUB NO 223 Pressure equipment testing after repair, modifications or re-rating: A guide to the pressure test waiver - Edition 1

EEMUA PUB NO 224 A guide to risk-based procurement Quality assurance of safety-critical engineering equipment and materials - Edition 1

EEMUA PUB NO 226 Design and installation of on-line analyser systems A guide to technical enquiry and bid evaluation - Edition 1

EEMUA PUB NO 230 Ageing rotating equipment Guide for maintenance and operation - Edition 1

EEMUA PUB NO 231 The mechanical integrity of plant containing hazardous substances - A guide to periodic examination and testing - Edition 1

EEMUA PUB NO 197 Specification for the Fabrication of Non-Primary Structural Steelwork for Offshore Installations

9.ASCE - American Society of Civil Engineers6

ASCE 7-05 SEISMIC LOADS Seismic Loads: Guide to the Seismic Load Provisions of ASCE 7-05

ASCE 7-10 Minimum Design Loads for Buildings and Other Structures - Third Printing; Incorporated Errata: January 11, 2011; Includes Supplement 1, and revised commentary, 2013

ASCE 7-10 SNOW LOADS Snow Loads: guide to the Snow Load Provisions of ASCE 7-10

ASCE 7-10 WIND LOADS Wind Loads: Guide to the Wind Load Provisions of ASCE 7-10

ASCE 15-98 Standard Practice for Direct Design of Buried Precast Concrete Pipe Using Standard Installations (SIDD)

ASCE ASCE/EWRI 42-04 Standard Practice for the Design and Operation of Precipitation Enhancement Projects

10.NACE - National Association of Corrosion Engineers39

NACE MR0103 Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments - Item No. 21305

NACE MR0175/ISO 15156 CIR 4 TO PT 3 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys - Second Edition

NACE MR0175/ISO 15156 CIR 3 TO PT 3 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys - Second Edition

NACE MR0175/ISO 15156 CIR 2 TO PT 2 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons TECHNICAL CIRCULAR 2 - Second Edition

NACE MR0175/ISO 15156 CIR 1 TO PT 1 Petroleum and natural gas industries - Materials for use in H2S- containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials TECHNICAL CIRCULAR 1 - Second Edition

NACE MR0175/ISO 15156 CIR 2 TO PT 3 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys TECHNICAL CIRCULAR 2 - Second Edition

NACE MR0175/ISO 15156 CIR 1 TO PT 3 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys TECHNICAL CIRCULAR 1 - Second Edition

NACE MR0175/ISO 15156 CIR 1 TO PT 2 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons TECHNICAL CIRCULAR 1 - Second Edition

NACE MR0175/ISO 15156 Petroleum and natural gas industries Materials for use in H2S-containing Environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials - Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys - Second Edition; Incorporates MR0175/ISO 15156-1, MR0175/ISO 15156-2 and MR0175/ISO 15156-3

NACE NO. 1 Joint Surface Preparation Standard White Metal Blast Cleaning - Item No. 21065

NACE NO. 2 Joint Surface Preparation Standard Near-White Metal Blast Cleaning - Item No. 21066; SSPC-SP 10

NACE RP0287 Field Measurement of Surface Profile of Abrasive Blast-Cleaned Steel Surfaces Using a Replica Tape - Item No: 21035

NACE RP0304 Design, Installation, and Operation of Thermoplastic Liners for Oilfield Pipelines - Item No. 21103

NACE RP0375 Field-Applied Underground Wax Coating Systems for Underground Pipelines: Application, Performance, and Quality Control - Item No. 21013

NACE RP0399 Plant Applied, External Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality Control - Item No:21089

NACE SP0169 Control of External Corrosion on Underground or Submerged Metallic Piping Systems - Item No. 21001

NACE SP0170 Protection of Austenitic Stainless Steels and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking During a Shutdown of Refinery Equipment - Item No. 21002

NACE SP0176 Corrosion Control of Submerged Areas of Permanently Installed Steel Offshore Structures Associated with Petroleum Production - Item 21018

NACE SP0177 Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems - Item No. 21021

NACE SP0178 Design, Fabrication, and Surface Finish Practices for Tanks and Vessels to Be Lined for Immersion Service - Item No:21022

NACE SP0185 Extruded Polyolefin Resin Coating Systems with Soft Adhesives for Underground or Submerged Pipe - Item No. 21029

NACE SP0188 Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates - Item No. 21038

NACE SP0274 High-Voltage Electrical Inspection of Pipeline Coatings - Item No. 21010

NACE SP0288 Inspection of Lining Application in Steel and Concrete Equipment - Item No. 21039

NACE SP0296 Detection, Repair, and Mitigation of Cracking in Refinery Equipment in Wet H2S Environments - Item No. 21078

NACE SP0388 Impressed Current Cathodic Protection of Internal Submerged Surfaces of Carbon Steel Water Storage Tanks - Item No. 21040

NACE SP0394 Application, Performance, and Quality Control of Plant-Applied Single-Layer Fusion-Bonded Epoxy External Pipe Coating - Item No. 21064

NACE SP0403 Avoiding Caustic Stress Corrosion Cracking of Carbon Steel Refinery Equipment and Piping - Item No. 21102

NACE SP0472 Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments - Item No. 21006

NACE SP0490 Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coatings of 250 to 760 um (10 to 30 Mils) - Item No. 21045

NACE TM0104 Offshore Platform Ballast Water Tank Coating System Evaluation - Item No:21243

NACE TM0177 Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments - Item No:21212

NACE TM0185 Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods by Autoclave Testing - Item No. 21217

NACE TM0186 Holiday Detection of Internal Tubular Coatings of 250 to 760 um (10 to 30 Mils) Dry Film Thickness - Item No:21218

NACE TM0194 Field Monitoring of Bacterial Growth in Oil and Gas Systems - Item No. 21224

NACE TM0284 Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking - Item No. 21215

NACE TM0304 Offshore Platform Atmospheric and Splash Zone Maintenance Coating System Evaluation - Item No:21245

NACE TM0384 Holiday Detection of Internal Tubular Coatings of Less Than 250 Micrometers (10 mils) Dry-Film Thickness - Item No:21216

NACE TM0404 Offshore Platform Atmospheric and Splash Zone New Construction Coating System Evaluation - Item No:21246

11.AASHTO - American Association of State Highway and Transportation Officials10

AASHTO CHBTW AMD 1 Construction Handbook for Bridge Temporary Works - Revision 1; 2008 Interim Revision

AASHTO CHBTW Construction Handbook for Bridge Temporary Works - Revision 1

AASHTO EAST Report on the 1990 European Asphalt Study Tour - Revision 1

AASHTO GSBTW AMD 1 Guide Design Specifications for Bridge Temporary Works - Revision 1; 2008 Interim Revision

AASHTO GSBTW Guide Design Specifications for Bridge Temporary Works - Revision 1

AASHTO HB-17 DIVISION II SEC 22 Division II Construction - Slope Protection

AASHTO M 294 Standard Specification for Corrugated Polyethylene Pipe, 300- to 1500-mm (12- to 60-in.) Diameter

AASHTO PS AASHTO Provisional Standards - 17th Edition

AASHTO T 193 Standard Method of Test for The California Bearing Ratio

AASHTO T 194 Standard Method of Test for Determination of Organic Matter in Soils by Wet Combustion

12.ASHRAE - American Society of Heating, Refrigerating and Air Conditioning Engineers103

ASHRAE 15 & 34 ERTA Safety Standard for Refrigeration Systems

ASHRAE 15 & 34 ADD A Safety Standard for Refrigeration Systems

ASHRAE 15 & 34 Safety Standard for Refrigeration Systems - Includes ANSI/ASHRAE addenda listed in Appendix H

ASHRAE 62.1 Ventilation for Acceptable Indoor Air Quality - Includes ANSI/ASHRAE addenda listed in Appendix J

ASHRAE 90.1-2013 I-P ERTA Energy Standard for Buildings Except Low-Rise Residential Buildings

ASHRAE 90.1-2013 I-P ERTA Energy Standard for Buildings Except Low-Rise Residential Buildings

ASHRAE 90.1-2013 I-P ERTA Energy Standard for Buildings Except Low-Rise Residential Buildings

ASHRAE 90.1-2013 I-P ERTA Energy Standard for Buildings Except Low-Rise Residential Buildings

ASHRAE 90.1-2013 I-P INT 1 Energy Standard for Buildings Except Low-Rise Residential Buildings

ASHRAE 90.1-2013 I-P Energy Standard for Buildings Except Low-Rise Residential Buildings - Includes ANSI/ASHRAE/IES Addenda listed in Appendix F

ASHRAE 90.1-2013 SI ERTA Energy Standard for Buildings Except Low-Rise Residential Buildings

ASHRAE 90.1-2013 SI ERTA Energy Standard for Buildings Except Low-Rise Residential Buildings

ASHRAE 90.1-2013 SI ERTA Energy Standard for Buildings Except Low-Rise Residential Buildings

ASHRAE 90.1-2013 SI ERTA Energy Standard for Buildings Except Low-Rise Residential Buildings

ASHRAE 90.1-2013 SI ERTA Energy Standard for Buildings Except Low-Rise Residential Buildings

ASHRAE 90.1-2013 SI Energy Standard for Buildings Except Low-Rise Residential Buildings - Includes ANSI/ASHRAE/IES Addenda listed in Appendix F

ASHRAE 90.1 USERS MANUAL ENERGY STANDARD FOR BUILDINGS EXCEPT LOW-RISE RESIDENTIAL BUILDINGS

ASHRAE FUNDAMENTALS IP ADD AND CORR Additions and Corrections

ASHRAE FUNDAMENTALS IP CH 1 PSYCHROMETRICS

ASHRAE FUNDAMENTALS IP CH 2 THERMODYNAMICS AND REFRIGERATION CYCLES

ASHRAE FUNDAMENTALS IP CH 3 FLUID FLOW

ASHRAE FUNDAMENTALS IP CH 4 HEAT TRANSFER

ASHRAE FUNDAMENTALS IP CH 5 TWO-PHASE FLOW

ASHRAE FUNDAMENTALS IP CH 6 MASS TRANSFER

ASHRAE FUNDAMENTALS IP CH 7 FUNDAMENTALS OF CONTROL

ASHRAE FUNDAMENTALS IP CH 8 SOUND AND VIBRATION

ASHRAE FUNDAMENTALS IP CH 9 THERMAL COMFORT

ASHRAE FUNDAMENTALS IP CH 10 INDOOR ENVIRONMENTAL HEALTH

ASHRAE FUNDAMENTALS IP CH 11 AIR CONTAMINANTS

ASHRAE FUNDAMENTALS IP CH 12 ODORS

ASHRAE FUNDAMENTALS IP CH 13 INDOOR ENVIRONMENTAL MODELING

ASHRAE FUNDAMENTALS IP CH 14 CLIMATIC DESIGN INFORMATION

ASHRAE FUNDAMENTALS IP CH 15 FENESTRATION

ASHRAE FUNDAMENTALS IP CH 16 VENTILATION AND INFILTRATION

ASHRAE FUNDAMENTALS IP CH 17 RESIDENTIAL COOLING AND HEATING LOAD CALCULATIONS

ASHRAE FUNDAMENTALS IP CH 18 NONRESIDENTIAL COOLING AND HEATING LOAD CALCULATIONS

ASHRAE FUNDAMENTALS IP CH 19 ENERGY ESTIMATING AND MODELING METHODS

ASHRAE FUNDAMENTALS IP CH 20 SPACE AIR DIFFUSION

ASHRAE FUNDAMENTALS IP CH 21 DUCT DESIGN

ASHRAE FUNDAMENTALS IP CH 22 PIPE SIZING

ASHRAE FUNDAMENTALS IP CH 23 INSULATION FOR MECHANICAL SYSTEMS

ASHRAE FUNDAMENTALS IP CH 24 AIRFLOW AROUND BUILDINGS

ASHRAE FUNDAMENTALS IP CH 25 HEAT, AIR, AND MOISTURE CONTROL IN BUILDING ASSEMBLIES-FUNDAMENTALS

ASHRAE FUNDAMENTALS IP CH 26 HEAT, AIR, AND MOISTURE CONTROL IN BUILDING ASSEMBLIES-MATERIAL PROPERTIES

ASHRAE FUNDAMENTALS IP CH 27 HEAT, AIR, AND MOISTURE CONTROL IN BUILDING ASSEMBLIES-EXAMPLES

ASHRAE FUNDAMENTALS IP CH 28 COMBUSTION AND FUELS

ASHRAE FUNDAMENTALS IP CH 29 REFRIGERANTS

ASHRAE FUNDAMENTALS IP CH 30 THERMOPHYSICAL PROPERTIES OF REFRIGERANTS

ASHRAE FUNDAMENTALS IP CH 31 PHYSICAL PROPERTIES OF SECONDARY COOLANTS (BRINES)

ASHRAE FUNDAMENTALS IP CH 32 SORBENTS AND DESICCANTS

ASHRAE FUNDAMENTALS IP CH 33 PHYSICAL PROPERTIES OF MATERIALS

ASHRAE FUNDAMENTALS IP CH 34 ENERGY RESOURCES

ASHRAE FUNDAMENTALS IP CH 35 SUSTAINABILITY

ASHRAE FUNDAMENTALS IP CH 36 MEASUREMENT AND INSTRUMENTS

ASHRAE FUNDAMENTALS IP CH 37 ABBREVIATIONS AND SYMBOLS

ASHRAE FUNDAMENTALS IP CH 38 UNITS AND CONVERSIONS

ASHRAE FUNDAMENTALS IP CH 39 CODES AND STANDARDS

ASHRAE FUNDAMENTALS IP HANDBOOK 2013 ASHRAE Handbook Fundamentals I-P Edition

ASHRAE FUNDAMENTALS IP INDEX Composite Index

ASHRAE FUNDAMENTALS IP TOC 2009 ASHRAE HANDBOOK FUNDAMENTALS I-P Edition

ASHRAE FUNDAMENTALS SI ADD AND CORR Additions and Corrections

ASHRAE FUNDAMENTALS SI CH 1 PSYCHROMETRICS

ASHRAE FUNDAMENTALS SI CH 2 THERMODYNAMICS AND REFRIGERATION CYCLES

ASHRAE FUNDAMENTALS SI CH 3 FLUID FLOW

ASHRAE FUNDAMENTALS SI CH 4 HEAT TRANSFER

ASHRAE FUNDAMENTALS SI CH 5 TWO-PHASE FLOW

ASHRAE FUNDAMENTALS SI CH 6 MASS TRANSFER

ASHRAE FUNDAMENTALS SI CH 7 FUNDAMENTALS OF CONTROL

ASHRAE FUNDAMENTALS SI CH 8 SOUND AND VIBRATION

ASHRAE FUNDAMENTALS SI CH 9 THERMAL COMFORT

ASHRAE FUNDAMENTALS SI CH 10 INDOOR ENVIRONMENTAL HEALTH

ASHRAE FUNDAMENTALS SI CH 11 AIR CONTAMINANTS

ASHRAE FUNDAMENTALS SI CH 12 ODORS

ASHRAE FUNDAMENTALS SI CH 13 INDOOR ENVIRONMENTAL MODELING

ASHRAE FUNDAMENTALS SI CH 14 CLIMATIC DESIGN INFORMATION

ASHRAE FUNDAMENTALS SI CH 15 FENESTRATION

ASHRAE FUNDAMENTALS SI CH 16 VENTILATION AND INFILTRATION

ASHRAE FUNDAMENTALS SI CH 17 RESIDENTIAL COOLING AND HEATING LOAD CALCULATIONS

ASHRAE FUNDAMENTALS SI CH 18 NONRESIDENTIAL COOLING AND HEATING LOAD CALCULATIONS

ASHRAE FUNDAMENTALS SI CH 19 ENERGY ESTIMATING AND MODELING METHODS

ASHRAE FUNDAMENTALS SI CH 20 SPACE AIR DIFFUSION

ASHRAE FUNDAMENTALS SI CH 21 DUCT DESIGN

ASHRAE FUNDAMENTALS SI CH 22 PIPE SIZING

ASHRAE FUNDAMENTALS SI CH 23 INSULATION FOR MECHANICAL SYSTEMS

ASHRAE FUNDAMENTALS SI CH 24 AIRFLOW AROUND BUILDINGS

ASHRAE FUNDAMENTALS SI CH 25 HEAT, AIR, AND MOISTURE CONTROL IN BUILDING ASSEMBLIES-FUNDAMENTALS

ASHRAE FUNDAMENTALS SI CH 26 HEAT, AIR, AND MOISTURE CONTROL IN BUILDING ASSEMBLIES-MATERIAL PROPERTIES

ASHRAE FUNDAMENTALS SI CH 27 HEAT, AIR, AND MOISTURE CONTROL IN BUILDING ASSEMBLIES-EXAMPLES

ASHRAE FUNDAMENTALS SI CH 28 COMBUSTION AND FUELS

ASHRAE FUNDAMENTALS SI CH 29 REFRIGERANTS

ASHRAE FUNDAMENTALS SI CH 30 THERMOPHYSICAL PROPERTIES OF REFRIGERANTS

ASHRAE FUNDAMENTALS SI CH 31 PHYSICAL PROPERTIES OF SECONDARY COOLANTS (BRINES)

ASHRAE FUNDAMENTALS SI CH 32 SORBENTS AND DESICCANTS

ASHRAE FUNDAMENTALS SI CH 33 PHYSICAL PROPERTIES OF MATERIALS

ASHRAE FUNDAMENTALS SI CH 34 ENERGY RESOURCES

ASHRAE FUNDAMENTALS SI CH 35 SUSTAINABILITY

ASHRAE FUNDAMENTALS SI CH 36 MEASUREMENT AND INSTRUMENTS

ASHRAE FUNDAMENTALS SI CH 37 ABBREVIATIONS AND SYMBOLS

ASHRAE FUNDAMENTALS SI CH 38 UNITS AND CONVERSIONS

ASHRAE FUNDAMENTALS SI CH 39 CODES AND STANDARDS

ASHRAE FUNDAMENTALS SI HANDBOOK 2013 ASHRAE HANDBOOK FUNDAMENTALS SI Edition

ASHRAE FUNDAMENTALS SI INDEX Composite Index

ASHRAE FUNDAMENTALS SI TOC 2009 ASHRAE Handbook Fundamentals SI Edition

13.TIA - Telecommunications Industry Association7

TIA TIA-222-G-2

TIA TIA-222-G-1

TIA TIA-222-G

TIA TIA-568-C SET

TIA TIA-569-C ERTA

TIA TIA-569-C-1

TIA TIA-569-C

14.AWWA - American Water Works Association29

AWWA A100 ERTA Water Wells

AWWA A100 Water Wells

AWWA C104/A21.4 CementMortar Lining for Ductile-Iron Pipe and Fittings

AWWA C110/A21.10 Ductile-Iron and Gray-Iron Fittings

AWWA C111/A21.11 Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings

AWWA C115/A21.15 Flanged Ductile-Iron Pipe With Ductile-Iron or Gray-Iron Threaded Flanges

AWWA C150/A21.50 Thickness Design of Ductile-Iron Pipe

AWWA C151/A21.51 Ductile-Iron Pipe, Centrifugally Cast

AWWA C200 ERRATA Errata to C200-12 Steel Water Pipe, 6 in. (150 mm) and Larger

AWWA C200 Steel Water Pipe, 6 in. (150 mm) and Larger

AWWA C203 Coal-Tar Protective Coatings and Linings for Steel Water Pipelines-Enamel and Tape-Hot-Applied

AWWA C205 CementMortar Protective Lining and Coating for Steel Water Pipe-4 In. (100 mm) and Larger-Shop Applied

AWWA C207 Steel Pipe Flanges for Waterworks Service, Sizes 4 In. Through 144 In. (100 mm Through 3,600 mm)

AWWA C208 Dimensions for Fabricated Steel Water Pipe Fittings

AWWA C213 Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines

AWWA C300 Reinforced Concrete Pressure Pipe, Steel-Cylinder Type

AWWA C301 Prestressed Concrete Pressure Pipe, Steel-Cylinder Type

AWWA C302 Reinforced Concrete Pressure Pipe, Noncylinder Type

AWWA C500 Metal-Seated Gate Valves for Water Supply Service

AWWA C504 Rubber-Seated Butterfly Valves, 3 In. (75 mm) Through 72 In. (1,800 mm)

AWWA C509 Resilient-Seated Gate Valves for Water Supply Service

AWWA C600 Installation of Ductile-Iron Mains and Their Appurtenances

AWWA C602 CementMortar Lining of Water Pipelines in Place-4 In. (100 mm) and Larger

AWWA C651 Disinfecting Water Mains - Incorporates Errata June 2005 & Errata March 2006

AWWA C654 Disinfection of Wells - Fourth Edition

AWWA C906 Polyethylene (PE) Pressure Pipe and Fittings, 4 in. (100 mm) Through 63 in. (1,600 mm), for Water Distribution and Transmission

AWWA D100 Welded Carbon Steel Tanks for Water Storage

AWWA M9 ERTA Concrete Pressure Pipe - Third Edition

AWWA M9 Concrete Pressure Pipe - Third Edition

15.ASME - American Society of Mechanical Engineers160

ASME A13.1 Scheme for the Identification of Piping Systems

ASME A17.1 Safety Code for Elevators and Escalators Includes Requirements for Elevators, Escalators, Dumbwaiters, Moving Walks, Material Lifts, and Dumbwaiters With Automatic Transfer Devices

ASME A17.1 HDBK Safety Code for Elevators and Escalators

ASME A17.1 INTERPRETATIONS Interpretations to A17.1 Safety Code for Elevators and Escalators - Includes Interpretations No. 1 Through 23 and 25 Through 31

ASME A17.2 Guide for Inspection of Elevators, Escalators, and Moving Walks Includes Inspection Procedures for Electric Traction and Winding Drum Elevators, Hydraulic Elevators, Inclined Elevators, Private Residence Elevators, and Escalators and Moving Walks

ASME A112.1.2 Air Gaps in Plumbing Systems (For Plumbing Fixtures and Water-Connected Receptors)

ASME B1.1 Unified Inch Screw Threads (UN and UNR Thread Form)

ASME B1.2 Gages and Gaging for Unified Inch Screw Threads - Errata May 1992

ASME B1.3 Screw Thread Gaging Systems for Acceptability: Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)

ASME B1.5 Acme Screw Threads

ASME B1.20.1 Pipe Threads, General Purpose (Inch)

ASME B1.20.3 Dryseal Pipe Threads (Inch) - Revision and Redesignation of B2.2-1968

ASME B1.20.5 Gaging for Dryseal Pipe Threads (Inch)

ASME B16.1 Gray Iron Pipe Flanges and Flanged Fittings Classes 25, 125, and 250

ASME B16.3 Malleable Iron Threaded Fittings Classes 150 and 300

ASME B16.4 Gray Iron Threaded Fittings Classes 125 and 250

ASME B16.4 INTERPRETATIONS Interpretations to B16.4-1998 - Gray Iron Threaded Fittings - Classes 125 and 250

ASME B16.5 Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24 Metric/Inch Standard

ASME B16.5 INTERPRETATIONS Interpretations to B16.5 Pipe Flanges and Flanged Fittings - Includes Interpretations Through No. 4

ASME B16.9 Factory-Made Wrought Buttwelding Fittings

ASME B16.9 INTERPRETATIONS Interpretations to B16.9-1993 Factory-Made Wrought Steel Buttwelding Fittings - Includes Interpretation No. 1

ASME B16.10 INTERPRETATIONS Interpretations to B16.10-1992 Face-to-Face and End-to-End Dimensions of Valves - Includes Interpretation No. 1

ASME B16.11 Forged Fittings, Socket-Welding and Threaded

ASME B16.15 Cast Copper Alloy Threaded Fittings Classes 125 and 250

ASME B16.15 INTERPRETATIONS Interpretations to B16.5-1985 Cast Bronze Threaded Fittings Classes 125 and 250 - Includes Interpretations No. 1: and interpretations through June 1, 2011

ASME B16.18 Cast Copper Alloy Solder Joint Pressure Fittings

ASME B16.20 Metallic Gaskets for Pipe Flanges Ring-Joint, Spiral-Wound, and Jacketed

ASME B16.21 Nonmetallic Flat Gaskets for Pipe Flanges

ASME B16.22 Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings

ASME B16.24 Cast Copper Alloy Pipe Flanges and Flanged Fittings Classes 150, 300, 600, 900, 1500, and 2500

ASME B16.25 Buttwelding Ends

ASME B16.25 INTERPRETATIONS INTERPRETATIONS TO ASME B16.25 Finish of Buttwelding Ends - Includes Interpretation No. 1 through 3

ASME B16.33 Manually Operated Metallic Gas Valves for Use in Gas Piping Systems Up to 175 psi (Sizes NPS Through NPS 2)

ASME B16.34 Valves-Flanged, Threaded, and Welding End

ASME B16.34 INTERPRETATIONS Interpretations to B16.34-1996 Valves - Flanged, Threaded, and Welding End - Includes Interpretation No. 2

ASME B16.10 Face-to-Face and End-to-End Dimensions of Valves

ASME B16.36 Orifice flanges

ASME B16.36 INTERPRETATIONS Interpretations to B16.36-1996 Orifice Flanges

ASME B16.39 Malleable Iron Threaded Pipe Unions Classes 150, 250, and 300

ASME B16.40 Manually Operated Thermoplastic Gas Shutoffs and Valves In Gas Distribution Systems

ASME B16.42 Ductile Iron Pipe Flanges and Flanged Fittings Classes 150 and 300

ASME B16.47 Large Diameter Steel Flanges NPS 26 Through NPS 60 Metric/Inch Standard

ASME B16.47 INTERPRETATIONS Interpretations to B16.47-1996 Large Diameter Steel Flanges NPS 26 Through NPS 60

ASME B16.48 Line Blanks

ASME B16.49 Factory-Made, Wrought Steel, Buttwelding Induction Bends for Transportation and Distribution Systems

ASME B18.2.1 Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series) - Includes Errata July 2013

ASME B18.2.2 Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange, and Coupling Nuts (Inch Series)

ASME B18.2.3.2M Metric Formed Hex Screws

ASME B18.2.3.3M Metric Heavy Hex Screws

ASME B18.2.3.4M Metric Hex Flange Screws - Supersedes IFI 536:1982

ASME B18.2.3.5M Metric Hex Bolts - Errata - May 1981

ASME B18.2.3.6M Metric Heavy Hex Bolts - Errata - April 1981

ASME B18.3 Socket Cap, Shoulder, Set Screws, and Hex Keys (Inch Series)

ASME B18.21.1 Washers: Helical Spring-Lock, Tooth Lock, and Plain Washers (Inch Series)

ASME B30.2 Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist) - Includes Interpretations through January 2010

ASME B30.2 INTERPRETATIONS Interpretations to B30.2 - Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist) - Includes Interpretations through January 2010

ASME B30.3 Tower Cranes

ASME B30.3 INTERPRETATIONS Interpretations to B30.3-1996 Hammerhead Tower Cranes

ASME B30.5 Mobile and Locomotive Cranes

ASME B30.5 INTERPRETATIONS Interpretations to B30.5 Mobile and Locomotive Cranes - Includes Interpretations April 1993 thru February 2011

ASME B30.6 Derricks - Includes Interpretations November 2002 through December 2009

ASME B30.6 INTERPRETATIONS Interpretations to B30.6-2010 Derricks - Includes Interpretations 1984 Thru December 2009

ASME B30.7 Winches - Includes Interpretations through January 2011

ASME B30.9 Slings - Includes Interpretations Through October 2009

ASME B30.9 INTERPRETATIONS Interpretations to B30.9-1996 Slings - Includes Interpretations Through 2009

ASME B30.10 Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings

ASME B30.10 INTERPRETATIONS Interpretations to B30.10-1993 Hooks

ASME B30.11 Monorails and Underhung Cranes - Includes Interpretations Dated May 2004 thru August 2009

ASME B30.11 INTERPRETATIONS Interpretations to B30.11 - 1998 Monorails and Underhung Cranes - Includes Interpretations April 1995 thru August 2009

ASME B30.14 Side Boom Tractors

ASME B30.16 Overhead Hoists (Underhung)

ASME B30.16 INTERPRETATIONS Interpretations to B30.16 - Overhead Hoists (Underhung) - Includes Interpretations through January 2012

ASME B30.17 Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung Hoist)

ASME B30.17 INTERPRETATIONS Interpretations to B30.17-1998 Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung Hoist)

ASME B30.20 Below-the-Hook Lifting Devices - Includes Interpretations October 2010 Through May 2012

ASME B30.20 INTERPRETATIONS Interpretations to B30.20 - Below-The-Hook Lifting Devices - Includes Interpretations Through May 2012

ASME B30.21 Lever Hoists Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings

ASME B30.21 INTERPRETATIONS Interpretations to B30.2-1994 Manually Lever Operated Hoists

ASME B30.22 Articulating Boom Cranes

ASME B30.22 INTERPRETATIONS Interpretations to B30.22-1993 Articulating Boom Cranes

ASME B30.23 Personnel Lifting Systems Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings

ASME B30.23 INTERPRETATIONS Interpretations to B30.23-2011 Personnel Lifting Systems Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings

ASME B30.26 ERTA Errata to B30.26-2010 Rigging Hardware

ASME B30.26 Rigging Hardware - Includes Interpretations May 2006 Through October 2009

ASME B30.26 INTERPRETATIONS Interpretations for ASME B30.26 - Rigging Hardware Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings - Include Interpretations May 2006 Through October 2009

ASME B31.1 Power Piping - Includes Interpretations No: 47

ASME B31.1 INTERPRETATIONS Interpretations to B31.1 Power Piping - Includes Interpretations No. 2 through 6, 8 through 10, 13, 15, 17 through 25, 27 through 31, and 42 through 47

ASME B31.3 Process Piping - Includes Interpretation 23

ASME B31.3 INTERPRETATIONS INTERPRETATIONS to B31.3 - 2010 Process Piping - Includes Interpretations No. 1 Through 23

ASME B31.4 Pipeline Transportation Systems for Liquids and Slurries - Includes Interpretations through May 15, 2012

ASME B31.4 INTERPRETATIONS Intrepretations to B31.4 Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids - Includes Interpretations through No. 9

ASME B31.5 Refrigeration Piping and Heat Transfer Components

ASME B31.5 INTERPRETATIONS Interpretations to B31.5-1992 Refrigreration Piping - Includes Interpretation No. 1 Through 8

ASME B31.8 INTERPRETATIONS Code for Pressure Piping - Includes Interpretations 1-16: September 1981 Through March 2012

ASME B31.8S Managing System Integrity of Gas Pipelines - Supplement to ASME B31.8

ASME B31.8 Gas Transmission and Distribution Piping Systems - Includes Interpretations VOLUME 16

ASME B31.9 Building Services Piping

ASME B31.9 INTERPRETATIONS Interpretations to B31.9-1996 Building Services Piping - Includes Interpretation March 1987 through November 2010

ASME B31.12 Hydrogen Piping and Pipelines

ASME B31EA Standard for the Seismic Design and Retrofit of Above-Ground Piping Systems - Addenda to ASME B31E-2008

ASME B31E Standard for the Seismic Design and Retrofit of Above-Ground Piping Systems

ASME B31G Manual for Determining the Remaining Strength of Corroded Pipelines

ASME B31J Standard Test Method for Determining Stress Intensification Factors (i-Factors) for Metallic Piping Components

ASME B31Q Pipeline Personnel Qualification

ASME B31Q SPANISH Calificacin del personal de lneas de tuberas

ASME B36.10M Welded and Seamless Wrought Steel Pipe

ASME B36.19M Stainless Steel Pipe

ASME B40.100 Pressure Gauges and Gauge Attachments

ASME B46.1 Surface Texture (Surface Roughness, Waviness, and Lay)

ASME B73.1 Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process

ASME B73.2 Specification for Vertical In-Line Centrifugal Pumps for Chemical Process

ASME B73.3 Specification for Sealless Horizontal End Suction Metallic Centrifugal Pumps for Chemical Process

ASME BTH-1 Design of Below-the-Hook Lifting Devices

ASME CSD-1 Controls and Safety Devices for Automatically Fired Boilers - Includes Interpretations Thru Volume 15: December 2011

ASME CSD-1 INTERPRETATIONS Interpretations to CSD-1 Controls and Safety Devices for Automatically Fired Boilers - Includes Interpretations Through Volume 15

ASME MFC-2M Measurement Uncertainty for Fluid Flow in Closed Conduits

ASME MFC-3M ADD Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi

ASME MFC-3M Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi - Date of Issuance: 8/15/2005

ASME MFC-4M Measurement of Gas Flow by Turbine Meters

ASME MFC-6 Measurement of Fluid Flow in Pipes Using Vortex Flowmeters

ASME MFC-7M Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles

ASME MFC-8M Fluid Flow in Closed Conduits: Connections for Pressure Signal Transmissions Between Primary and Secondary Devices

ASME MFC-10M Method for Establishing Installation Effects on Flowmeters

ASME MFC-14M Measurement of Fluid Flow Using Small Bore Precision Orifice Meters

ASME MFC-18M Measurement of Fluid Flow Using Variable Area Meters

ASME MFC-19G Wet Gas Flowmetering Guideline

ASME N626.3 Qualifications and Duties of Specialized Professional Engineers

ASME NQA-1 Quality Assurance Requirements for Nuclear Facility Applications - Includes Interpretations December 2010 through October 2012

ASME NQA-1 INTERPRETATIONS Interpretations to NQA-1 Quality Assurance Requirements for Nuclear Facility Applications - Includes Interpretations 1991 through 2012

ASME OM Operation and Maintenance of Nuclear Power Plants

ASME OM CODE CASES Code Cases to OM CODE Code for Operation and Maintenance of Nuclear Power Plants

ASME OM CODE INTERPRETATIONS Interpretations to OM CODE Code for Operation and Maintenance of Nuclear Power Plants - Includes Interpretations Dated September 1, 1995 thru April 18, 2012

ASME PCC-1 Guidelines for Pressure Boundary Bolted Flange Joint Assembly

ASME PCC-2 Repair of Pressure Equipment and Piping

ASME PCC-3 Inspection Planning Using Risk-Based Methods

ASME PTC 1 General Instructions Performance Test Codes

ASME PTC 2 Definitions and Values Performance Test Codes

ASME PTC 4 Fired Steam Generators

ASME PTC 6 Steam Turbines - Erratum: 2/2006

ASME PTC 8.2 Centrifugal Pumps

ASME PTC 10 Performance Test Code on Compressors and Exhausters

ASME PTC 19.2 Pressure Measurement Instruments and Apparatus Supplement

ASME PTC 19.3 TW ERTA Thermowells Performance Test Codes

ASME PTC 19.3 TW Thermowells Performance Test Codes

ASME PTC 22 Performance Test Code on Gas Turbines

ASME PTC 25 Pressure Relief Devices

ASME PTC 30 Air Cooled Heat Exchangers

ASME PTC 36 Measurement of Industrial Sound

ASME PVHO-1 Safety Standard for Pressure Vessels for Human Occupancy - Includes Interpretations Volumes 1, 3, 4 and 6

ASME PVHO-1 INTERPRETATIONS Interpretations to PVHO-1997 Safety Standard for Pressure Vessels for Human Occupancy - Includes Interpretations Volumes 1, 3, 4 and 6

ASME QAI-1 Qualifications for Authorized Inspection

ASME QAI-1 INTERPRETATIONS Interpretations to QAI-1-1995 Qualifications for Authorized Inspection

ASME RTP-1 Reinforced Thermoset Plastic Corrosion-Resistant Equipment

ASME STS-1 Steel Stacks

ASME Y14.1 Decimal Inch Drawing Sheet Size and Format

ASME Y14.1M Metric Drawing Sheet Size and Format

ASME Y14.5 Dimensioning and Tolerancing

ASME Y14.5.1M Mathematical Definition of Dimensioning and Tolerancing Principles

ASME Y14.43 Dimensioning and Tolerancing Principles for Gages and Fixtures

ASME Y32.18 Symbols for Mechanical and Acoustical Elements as Used in Schematic Diagrams

16.ASME BPVC - American Society of Mechanical Engineers Boiler and Pressure Vessel Code1252

17. CTI - Cooling Technology Institute2

CTI ATC-105 SUPPLEMENT Acceptance Test Code for Closed Circuit Cooling Towers - Supplement To CTI Code ATC-105

CTI ATC-105 Acceptance Test Code for Water Cooling Towers

18.GPA Gas Processors Association4

GPA STD 2140 Liquefied Petroleum Gas Specifications and Test Methods

GPA STD 2145 Table of Physical Properties for Hydrocarbons and Other Compounds of Interest to the Natural Gas Industry

GPA STD 2177 Analysis of Natural Gas Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography

GPA STD 2261 Analysis for Natural Gas and Similar Gaseous Mixtures by Gas Chromatography

19.IEEE - Institute of Electrical and Electronics Engineers96

IEEE 32 Requirements, Terminology, and Test Procedure for Neutral Grounding Devices

IEEE 43 Recommended Practice for Testing Insulation Resistance of Rotating Machinery

IEEE 45 INT 1-2 Recommended Practice for Electric Installations on Shipboard

IEEE 45 INT 1 Recommended Practice for Electric Installations on Shipboard

IEEE 45 Recommended Practice for Electrical Installations on Shipboard

IEEE 80 ERTA Guide for Safety in AC Substation Grounding

IEEE 80 INT 1 Guide for Safety in AC Substation Grounding

IEEE 80 Guide for Safety in AC Substation Grounding

IEEE 81 Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding System

IEEE 112 Standard Test Procedure for Polyphase Induction Motors and Generators

IEEE 115 Guide for Test Procedures for Synchronous Machines Part I-Acceptance and Performance Testing Part II-Test Procedures and Parameter Determination for Dynamic Analysis

IEEE 141 Recommended Practice for Electric Power Distribution for Industrial Plants - IEEE Red Book (Color Book Series); Correction Sheet - July 23, 1997; Correction Sheet June 9, 1998

IEEE 142 ERTA Recommended Practice for Grounding of Industrial and Commercial Power Systems

IEEE 142 Recommended Practice for Grounding of Industrial and Commercial Power Systems - IEEE Green Book (Color Book Series)

IEEE 242 ERTA Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems

IEEE 242 Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems - IEEE Buff Book (Color Book Series)

IEEE 303 Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations

IEEE 315 Graphic Symbols for Electrical and Electronics Diagrams (Including Reference Designation Class Designation Letters) - CSA Z99-75; Includes supplement to ANSI Y32.2-75 and IEEE 315-75

IEEE 383 Qualifying Class 1E Electric Cables and Field Splices for Nuclear Power Generating Stations

IEEE 399 Recommended Practice for Industrial and Commercial Power Systems Analysis - IEEE Brown Book (Color Book Series; Best Copy Available

IEEE 446 Recommended Practice for Emergency and Standby Power Systems for Industrial and Commercial Applications - IEEE Orange Book (Color Book Series)

IEEE 450 Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary Applications

IEEE 484 Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary Applications

IEEE 485 Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications

IEEE 515 The Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial Applications

IEEE 522 Guide for Testing Turn Insulation of Form-Wound Stator Coils for Alternating-Current Electric Machines

IEEE 524 Guide to the Installation of Overhead Transmission Line Conductors

IEEE 576 Recommended Practice for Installation, Termination, and Testing of Insulated Power Cable as Used in Industrial and Commercial Applications

IEEE 635 Guide for Selection and Design of Aluminum Sheaths for Power Cables

IEEE 841 Petroleum and Chemical Industry-Premium- Efficiency, Severe-Duty, Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors-Up to and Including 370 kW (500 hp)

IEEE 951 Guide to the Assembly and Erection of Metal Transmission Structures

IEEE 1068 The Repair and Rewinding of AC Electric Motors in the Petroleum, Chemical, and Process Industries

IEEE 1202 CORR 1 Flame-Propagation Testing of Wire and Cable Corrigendum 1

IEEE 1202 Standard for Flame-Propagation Testing of Wire and Cable

IEEE 1242 Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants

IEEE 1580 Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating Facilities

IEEE 1584B Guide for Performing Arc-Flash Hazard Calculations Amendment 2: Changes to Clause 4

IEEE 1584 INT 1-3 Guide for Performing Arc-Flash Hazard Calculations

IEEE 1584 INT Guide for Performing Arc-Flash Hazard Calculations

IEEE 1584A Guide for Performing Arc-Flash Hazard Calculations-Amendment 1 - Includes Access to Additional Content.

IEEE 1584 Guide for Performing Arc-Flash Hazard Calculations - Includes Access to Additional Content

IEEE C37.2 Electrical Power System Device Function Numbers, Acronyms, and Contact Designations

IEEE C37.04 INT 1 Rating Structure for AC High-Voltage Circuit Breakers

IEEE C37.04 CORR 1 Rating Structure for AC High-Voltage Circuit Breakers Corrigendum 1

IEEE C37.04B Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Amendment 2: To Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100

IEEE C37.04 ERTA Errata to IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers

IEEE C37.04A IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Amendment 1: Capacitance Current Switching

IEEE C37.04 Rating Structure for AC High-Voltage Circuit Breakers

IEEE C37.06 AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis-Preferred Ratings and Related Required Capabilities for Voltages Above 1000 V

IEEE C37.09B Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Amendment 2: To Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100

IEEE C37.09 ERTA Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis

IEEE C37.09 CORR 1 Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis

IEEE C37.09A Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis

IEEE C37.09 Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis

IEEE C37.010 Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis

IEEE C37.011 Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers

IEEE C37.13A Low-Voltage AC Power Circuit Breakers Used in Enclosures Amendment 1: Increase of Voltages to 1000 V AC and Below

IEEE C37.13 INT 1 Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures

IEEE C37.13 Low-Voltage AC Power Circuit Breakers Used in Enclosures

IEEE C37.16 Preferred Ratings, Related Requirements, and Application Recommendations for Low-Voltage AC (635 V and below) and DC (3200 V and below) Power Circuit Breakers

IEEE C37.17 Trip Systems for Low-Voltage (1000 V and below) AC and General Purpose (1500 V and below) DC Power Circuit Breakers

IEEE C37.20.1B Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear Amendment 2: Additional Requirements for Control and Auxiliary Power Wiring in DC Traction Power Switchgear

IEEE C37.20.1A Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear Amendment 1: Short-Time and Short- Circuit Withstand Current Tests- Minimum Areas for Multiple Cable Connections

IEEE C37.20.1 INT 1 Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear

IEEE C37.20.1 Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear

IEEE C37.20.2 CORR Metal-Clad Switchgear - Correction Sheet

IEEE C37.20.2 Metal-Clad Switchgear

IEEE C37.23 Metal-Enclosed Bus

IEEE C37.24 Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear

IEEE C37.30 INT 1 Requirements for High-Voltage Switches

IEEE C37.30 Standard Requirements for High-Voltage Switches

IEEE C37.32 High-Voltage Switches, Bus Supports and Accessories Schedule of Preferred Ratings, Construction Guidelines and Specifications

IEEE C37.90 Standard for Relays and Relay Systems Associated with Electric Power Apparatus

IEEE C37.90.1 Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus

IEEE C37.91 Guide for Protective Relay Applications to Power Transformers - Best Copy Available

IEEE C37.100 Standard Definitions for Power Switchgear

IEEE C50.13 Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above

IEEE C57.12.00 General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers

IEEE C57.12.01 Standard General Requirements for Dry-Type Distribution and Power Transformers, Including Those with Solid-Cast and/or Resin Encapsulated Windings

IEEE C57.12.10 CORR 2 Liquid-Immersed Power Transformers Corrigendum 2: Correction of A.3.2.13 Autotransformer LTC application considerations

IEEE C57.12.10 CORR 1 Standard Requirements for Liquid-Immersed Power Transformers Corrigendum 1: Correction of 5.1.9 Sudden Pressure Relay

IEEE C57.12.10 ERTA Errata to IEEE Standard Requirements for Liquid-Immersed Power Transformers

IEEE C57.12.10 Requirements for Liquid-Immersed Power Transformers

IEEE C57.12.20 Overhead-Type Distribution Transformers 500 kVA and Smaller: High Voltage, 34 500 V and Below; Low Voltage, 7970/13 800Y V and Below

IEEE C57.12.21 Requirements for Pad-Mounted, Compartmental-Type Self-Cooled, Single-Phase Distribution Transformers With High Voltage Bushings; High-Voltage, 34500 GRYD/19920 Volts and Below; Low-Voltage, 240/120 Volts; 167 kVA and Smaller - Replaces NEMA C57.12.21-1980

IEEE C57.12.25 Transformers Pad-Mounted, Compartmental-Type, Self-Cooled, Single-Phase Distribution Transformers with Separable Insulated High-Voltage Connectors; High Voltage, 34 500 GrdY/19 920 Volts and Below; Low Voltage, 240/120 Volts; 167 kVA and Smaller Requirements - Replaces NEMA C57.12.25-1990

IEEE C57.12.51 Ventilated Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 V to 34 500 V; Low-Voltage 208Y/120 V to 4160 V-General Requirements

IEEE C57.12.80 Terminology for Power and Distribution Transformers

IEEE C57.12.90 Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers

IEEE C57.12.91 Test Code for Dry-Type Distribution and Power Transformers

IEEE C57.13 Requirements for Instrument Transformers

IEEE C57.13.1 Guide for Field Testing of Relaying Current Transformers

IEEE C57.91 Guide for Loading Mineral-Oil-Immersed Transformers and Step-Voltage Regulators

IEEE NESC National Electrical Safety Code(R)

IEEE C2 ERTA National Electrical Safety Code

IEEE C2 National Electrical Safety Code

20. ISA - Instrument Society of America58

ISA 5.1 Instrumentation Symbols and Identification

ISA 5.2 Binary Logic Diagrams for Process Operations

ISA 5.3 Graphic Symbols for Distributed Control/Shared Display Instrumentation, Logic and Computer Systems

ISA 5.4 Instrument Loop Diagrams

ISA 5.5 Graphic Symbols for Process Displays

ISA 7.0.01 Quality Standard for Instrument Air

ISA 12.10 Area Classification in Hazardous (Classified) Dust Locations

ISA 12.12.01 Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations

ISA 12.27.01 Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process Fluids

ISA 18.1 Annunciator Sequences and Specifications

ISA 18.2 Management of Alarm Systems for the Process Industries

ISA 20 Specification Forms for Process Measurement and Control Instruments, Primary Elements and Control Valves

ISA 51.1 Process Instrumentation Terminology

ISA 71.01 Environmental Conditions for Process Measurement and Control Systems: Temperature and Humidity

ISA 71.02 Environmental Conditions for Process Measurement and Control Systems: Power

ISA 71.03 Environmental Conditions for Process Measurement and Control Systems: Mechanical Influences

ISA 71.04 Environmental Conditions for Process Measurement and Control Systems: Airborne Contaminants

ISA 75.01.01 Industrial-Process Control Valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions

ISA 75.05.01 Control Valve Terminology

ISA 75.07 Laboratory Measurement of Aerodynamic Noise Generated by Control Valves

ISA 75.08.01 FAce-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (Classes 125, 150, 250, 300, and 600)

ISA 75.08.06 Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900, 1500, and 2500)

ISA 75.19.01 Hydrostatic Testing of Control Valves

ISA 77.41.01 Fossil Fuel Power Plant Boiler Combustion Controls

ISA 77.42.01 Fossil Fuel Power Plant Feedwater Control System - Drum Type

ISA 77.43.01 Fossil Fuel Power Plant Unit/Plant Demand Development Drum Type

ISA 77.44.01 Fossil Fuel Power Plant - Steam Temperature Controls

ISA 82.03 Safety Standard for Electrical and Electronic Test, Measuring, Controlling, and Related Equipment

ISA 84.00.01 P1 Functional Safety: Safety Instrumented Systems for the Process Industry Sector - Part 1: Framework, Definitions, System, Hardware and Software Requirements

ISA 84.00.01 P2 Functional Safety: Safety Instrumented Systems for the Process Industry Sector - Part 2: Guidelines for the Application of ANSI/ISA-84.00.01-2004 Part 1 - Informative

ISA 84.00.01 P3 Functional Safety: Safety Instrumented Systems for the Process Industry Sector - Part 3: Guidance for the Determination of the Required Safety Integrity Levels - Informative

ISA 88.00.01 Batch Control Part 1: Models and Terminology

ISA 60079-0 Explosive atmospheres Part 0: Equipment General Requirements - Sixth Edition; 12.00.01

ISA 60079-2 Explosive Atmospheres Part 2: Equipment protection by pressurized enclosures p - 12.04.01

ISA 60079-7 Explosive Atmospheres - Part 7: Equipment protection by increased safety "e" - Fourth Edition; 12.16.01

ISA 60079-11 Explosive Atmospheres - Part 11: Equipment protection by intrinsic safety i - Edition 6.2; 12.02.01

ISA 60079-15 Explosive atmospheres Part 15: Equipment protection by type of protection "n" - Edition 4; 12.12.02

ISA 62443-1-1 Security for Industrial Automation and Control Systems Part 1: Terminology, Concepts, and Models - 99.01.01

ISA RP31.1 Specification, Installation, and Calibration of Turbine Flowmeters

ISA RP60.1 Control Center Facilities

ISA RP60.3 Human Engineering for Control Centers

ISA RP60.4 Documentation for Control Centers

ISA RP60.6 Nameplates, Labels and Tags for Control Centers

ISA RP60.8 Electrical Guide for Control Centers

ISA RP60.9 Piping Guide for Control Centers

ISA TR84.00.02 PART 1 Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 1: Introduction

ISA TR84.00.02 PART 2 Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 2: Determining the SIL of a SIF via Simplified Equations

ISA TR84.00.02 PART 3 Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 3: Determining the SIL of a SIF via Fault Tree Analysis

ISA TR84.00.02 PART 4 Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 4: Determining the SIL of a SIF via Markov Analysis

ISA TR84.00.02 PART 5 Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 5: Determining the PFD of SIS Logic Solvers via Markov Analysis

ISA TR84.00.03 Mechanical Integrity of Safety Instrumented Systems (SIS)

ISA TR84.00.04 PART 1 Guidelines for the Implementation of ANSI/ISA-84.00.01-2004

ISA TR84.00.04 PART 2 Example Implementation of ANSI/ISA-84.00.01-2004

ISA TR84.00.05 Guidance on the Identification of Safety Instrumented Functions (SIF) in Burner Management Systems (BMS)

ISA TR84.00.06 Safety Fieldbus Design Considerations for Process Industry Sector Applications

ISA TR84.00.07 Guidance on the Evaluation of Fire, Combustible Gas and Toxic Gas System Effectiveness

ISA TR91.00.02 Criticality Classification Guideline for Instrumentation

ISA TR96.05.01 Partial Stroke Testing of Automated Block Valves

21.NBBI - National Board of Boiler and Pressure Vessel Inspectors3

NBBI NB-23 PART 1 National Board Inspection Code - Part 1 Installation

NBBI NB-23 PART 2 National Board Inspection Code - Part 2 Inspection

NBBI NB-23 PART 3 National Board Inspection Code - Part 3 Repairs and Alterations

22.NEMA National Electrical Manufacturers Association 34

NEMA 250 Enclosures for Electrical Equipment (1000 Volts Maximum)

NEMA C29.1 Test Methods for Electrical Power Insulators

NEMA C29.5 Wet-Process Porcelain Insulators (Low and Medium Voltage Pin Type)

NEMA C29.7 Wet Process Porcelain Insulators - High-Voltage Line-Post Type

NEMA C37.51 For Switchgear - Metal-Enclosed Low-Voltage AC Power Circuit Breaker Switchgear Assemblies-Conformance Test Procedures - Incorporates Errata: February 2011

NEMA C37.51A For Switchgear - Metal-Enclosed Low-Voltage AC Power Circuit Breaker Switchgear Assemblies-Conformance Test Procedures Amendment 1: Short-Time Withstand Current Tests

NEMA C80.1 Electrical Rigid Steel Conduit (ERSC)

NEMA C80.3 Steel Electrical Metallic Tubing (EMT)

NEMA C80.5 Electrical Rigid Aluminum Conduit (ERAC)

NEMA C80.6 Electrical Intermediate Metal Conduit (EIMC)

NEMA C84.1 Electric Power Systems and Equipment - Voltage Ratings (60 Hertz)

NEMA FG 1 Fiberglass Cable Tray Systems - Revision No.1 - November 1994

NEMA ICS 1 Industrial Control and Sysstems General Requirements

NEMA ICS 2 INDUSTRIAL CONTROL AND SYSTEMS CONTROLLERS, CONTACTORS, AND OVERLOAD RELAYS RATED 600 VOLTS - Incorporates Errata: March 2008

NEMA ICS 6 Industrial Control and Systems: Enclosures

NEMA MG 1 Motors and Generators - Incorporates Errata: October 2012

NEMA MG 2 Safety Standard for Construction and Guide for Selection, Installation and Use of Electric Motors and Generators

NEMA MG 10 Energy Management Guide for Selection and Use of Fixed Frequency Medium AC Squirrel-Cage Polyphase Induction Motors

NEMA PB 1 Panelboards

NEMA PE 1 Uninterruptible Power Systems (UPS) - Specification and Performance Verification - National Adoption

NEMA PE 5 Utility Type Battery Chargers

NEMA RN 1 Polyvinyl-Chloride (PVC) Externally Coated Galvanized Rigid Steel Conduit and Intermediate Metal Conduit

NEMA ST 20 Dry-Type Transformers for General Applications

NEMA TC 2 Electrical Polyvinyl Chloride (PVC) Conduit

NEMA TC 6 & 8 Polyvinyl Chloride (PVC) Plastic Utilities Duct for Underground Installations

NEMA TR 1 Transformers, Step Voltage Regulators and Reactors

NEMA VE 1 METAL CABLE TRAY SYSTEMS

NEMA WC 57 Standard for Control, Thermocouple Extension, and Instrumentation Cables - ICEA S-73-532

NEMA Z535.1 Safety Colors

NEMA Z535.2 Environmental and Facility Safety Signs

NEMA Z535.3 Criteria for Safety Symbols

NEMA Z535.4 Product Safety Signs and Labels

NEMA Z535.6 Product Safety Information in Product Manuals, Instructions, and Other Collateral Materials - Incorporating Errata: November 1, 2011

NEMA Z535.5 Safety Tags and Barricade Tapes (for Temporary Hazards) - Incorporates Errata: November 3, 2011

23.NFPA - National Fire Protection Association95

NFPA 1 AMD 1 Fire Code - Effective Date: 08/31/2011

NFPA 1 Fire Code - Effective Date: 06/20/2011

NFPA 10 Standard for Portable Fire Extinguishers - Effective Date: 12/17/2012

NFPA 11 AMD 1 Standard for Low-, Medium-, and High-Expansion Foam - Effective Date: March 23, 2010

NFPA 11 Standard for Low-, Medium-, and High-Expansion Foam - Effective Date: 12/5/2009

NFPA 12 Standard on Carbon Dioxide Extinguishing Systems - Effective Date: 1/3/2011

NFPA 12A Standard on Halon 1301 Fire Extinguishing Systems - Effective Date: 7/18/2008

NFPA 13 TIA Standard for the Installation of Sprinkler Systems - Effective Date: 8/29/2012

NFPA 13 ERTA Standard for the Installation of Sprinkler Systems

NFPA 13 Standard for the Installation of Sprinkler Systems - Effective Date: 8/29/2012

NFPA 13R Standard for the Installation of Sprinkler Systems in Low-Rise Residential Occupancies - Effective Date: 8/29/2012

NFPA 15 Standard for Water Spray Fixed Systems for Fire Protection - Effective Date: 08/31/2011

NFPA 16 Standard for the Installation of Foam-Water Sprinkler and Foam-Water Spray Systems - Effective Date: 1/3/2011

NFPA 17 Standard for Dry Chemical Extinguishing Systems - Effective Date: 12/17/2012

NFPA 20 Standard for the Installation of Stationary Pumps for Fire Protection - Effective Date: 08/29/2012

NFPA 22 Standard for Water Tanks for Private Fire Protection - Effective Date: 12/17/2012

NFPA 24 Standard for the Installation of Private Fire Service Mains and Their Appurtenances - Effective Date: 6/18/2012

NFPA 25 Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems - Effective Date: 8/21/2013

NFPA 30 Flammable and Combustible Liquids Code - Effective Date: 5/19/2014

NFPA 37 AMD 3 Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines - Effective Date: 8/20/2013

NFPA 37 AMD 2 Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines - Effective Date: 8/20/2013

NFPA 37 AMD 1 Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines - Effective Date: 12/5/2009

NFPA 37 Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines - Effective Date: 12/5/2009

NFPA 51B Standard for Fire Prevention During Welding, Cutting, and Other Hot Work - Effective Date: 06/17/2013

NFPA 54 National Fuel Gas Code - Effective Date: 8/31/2011

NFPA 55 AMD 2 Compressed Gases and Cryogenic Fluids Code

NFPA 55 ERTA Compressed Gases and Cryogenic Fluids Code

NFPA 55 AMD 1 Compressed Gases and Cryogenic Fluids Code - Effective Date: November 19, 2012

NFPA 55 Compressed Gases and Cryogenic Fluids Code - Effective Date: June 18, 2012

NFPA 58 ERTA 2 Liquefied Petroleum Gas Code

NFPA 58 AMD 3 Liquefied Petroleum Gas Code - Effective Date: 11/11/2013

NFPA 58 ERTA 1 Liquefied Petroleum Gas Code

NFPA 58 AMD 2 Liquefied Petroleum Gas Code - Effective Date: 08/20/2013

NFPA 58 AMD 1 Liquefied Petroleum Gas Code - Effective Date: 08/20/2013

NFPA 58 Liquefied Petroleum Gas Code - Effective Date: 08/21/2013

NFPA 59 Utility LP-Gas Plant Code - Effective Date: 06/20/2011

NFPA 59A AMD 2 Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG) - Effective Date: 3/23/2014

NFPA 59A AMD 1 Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG) - Effective Date: 03/27/2013

NFPA 59A Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG) - Effective Date: 08/29/2012

NFPA 68 Standard on Explosion Protection by Deflagration Venting - Effective Date: 12/17/2012

NFPA 69 Standard on Explosion Prevention Systems - Effective Date: 12/2/2013

NFPA 70 ERTA 3 National Electrical Code

NFPA 70 AMD 3 National Electrical Code

NFPA 70 ERTA 2 National Electrical Code

NFPA 70 AMD 2 National Electrical Code - Effective Date: 11/11/2013

NFPA 70 ERTA National Electrical Code - Effective Date: 8/21/2013

NFPA 70 AMD 1 National Electrical Code - Effective Date: 8/20/2013

NFPA 70 National Electrical Code - Effective Date: 8/21/2013

NFPA 70B Recommended Practice for Electrical Equipment Maintenance - Effective Date: 12/17/2012

NFPA 70E ERTA 1 Standard for Electrical Safety in the Workplace

NFPA 70E Standard for Electrical Safety in the Workplace - Effective Date: 8/31/2011

NFPA 72 AMD 5 National Fire Alarm and Signaling Code - Effective Date: 8/29/2012

NFPA 72 AMD 4 National Fire Alarm and Signaling Code - Effective Date: 8/29/2012

NFPA 72 AMD 3 National Fire Alarm and Signaling Code - Effective Date: 8/29/2012

NFPA 72 AMD 2 National Fire Alarm and Signaling Code - Effective Date: 8/29/2012

NFPA 72 AMD 1 National Fire Alarm and Signaling Code - Effective Date: 8/29/2012

NFPA 72 National Fire Alarm and Signaling Code - Effective Date: 8/29/2012

NFPA 73 ERTA Standard for Electrical Inspections for Existing Dwellings

NFPA 73 Standard for Electrical Inspections for Existing Dwellings - Effective Date: 06/21/2010

NFPA 75 ERTA Standard for the Fire Protection of Information Technology Equipment

NFPA 75 Standard for the Fire Protection of Information Technology Equipment - Effective Date: 7/29/2012

NFPA 76 Standard for the Fire Protection of Telecommunications Facilities - Effective Date: 1/2/2012

NFPA 77 Recommended Practice on Static Electricity - Effective Date: 06/17/2013

NFPA 85 ERTA 1 Boiler and Combustion Systems Hazards Code

NFPA 85 Boiler and Combustion Systems Hazards Code - Effective Date: 1/3/2011

NFPA 86 ERTA 1 Standard for Ovens and Furnaces

NFPA 86 AMD 4 Standard for Ovens and Furnaces - Effective Date: 3/21/2011

NFPA 86 AMD 3 Standard for Ovens and Furnaces - Effective Date: 3/21/2011

NFPA 86 AMD 2 Standard for Ovens and Furnaces - Effective Date: 8/25/2010

NFPA 86 AMD 1 Standard for Ovens and Furnaces - Effective Date: 8/25/2010

NFPA 86 Standard for Ovens and Furnaces - Effective Date: 8/25/2010

NFPA 87 Recommended Practice for Fluid Heaters - Effective Date: 05/19/2014

NFPA 90A Standard for the Installation of Air-Conditioning and Ventilating Systems - Effective Date: 05/19/2014; Incorporating Interpretation 2015

NFPA 101 AMD 4 Life Safety Code - Effective Date: 11/11/2013

NFPA 101 AMD 3 Life Safety Code - Effective Date: 11/11/2013

NFPA 101 AMD 2 Life Safety Code

NFPA 101 AMD 1 Life Safety Code - Effective Date: 8/31/2011

NFPA 101 Life Safety Code - Effective Date: 8/31/2011

NFPA 110 Standard for Emergency and Standby Power Systems - Effective Date: 06/18/2012

NFPA 221 Standard for High Challenge Fire Walls, Fire Walls, and Fire Barrier Walls - Effective Date: 5/19/2014

NFPA 418 Standard for Heliports - Effective Date: 01/3/2011

NFPA 495 Explosive Materials Code - Effective Date: 12/17/2012

NFPA 496 Standard for Purged and Pressurized Enclosures for Electrical Equipment - Effective Date: 12/17/2012

NFPA 497 Recommended Practice for the Classification of Flammable Liquids, Gases, or Vapors and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas - Effective Date: 01/02/2012

NFPA 654 ERTA 1 Standard for the Prevention of Fire and Dust Explosions from the Manufacturing, Processing, and Handling of Combustible Particulate Solids

NFPA 654 Standard for the Prevention of Fire and Dust Explosions from the Manufacturing, Processing, and Handling of Combustible Particulate Solids - Effective Date: 06/18/2012

NFPA 750 Standard on Water Mist Fire Protection Systems - Effective Date: 12/05/2009

NFPA 780 Standard for the Installation of Lightning Protection Systems - Effective date: 06/17/2013

NFPA 850 AMD 2 Recommended Practice for Fire Protection for Electric Generating Plants and High Voltage Direct Current Converter Stations - Effective Date: 11/9/2010

NFPA 850 AMD 1 Recommended Practice for Fire Protection for Electric Generating Plants and High Voltage Direct Current Converter Stations - Effective Date: 8/25/2010

NFPA 850 ERTA 1 Recommended Practice for Fire Protection for Electric Generating Plants and High Voltage Direct Current Converter Stations

NFPA 850 Recommended Practice for Fire Protection for Electric Generating Plants and High Voltage Direct Current Converter Stations - Effective Date: 01/04/2010

NFPA 1992 Standard on Liquid Splash-Protective Ensembles and Clothing for Hazardous Materials Emergencies - Effective Date: 1/2/2012

NFPA 2001 AMD 1 Standard on Clean Agent Fire Extinguishing Systems - Effective Date: November 19, 2012

NFPA 2001 Standard on Clean Agent Fire Extinguishing Systems - Effective Date: 8/31/2011

24.PFI - Pipe Fabrication Institute11

PFI ES-3 FABRICATING TOLERANCES

PFI ES-5 CLEANING OF FABRICATED PIPING

PFI ES-7 MINIMUM LENGTH AND SPACING FOR WELDED BRANCH CONNECTIONS

PFI ES-11 Permanent Marking on Piping Materials

PFI ES-22 Recommended Practice for Color Coding of Piping Materials

PFI ES-24 PIPE BENDING MET