商品ダイジェストＰＲＯＤＵＣＴ ＤＩＧＥＳＴ

Heavy Duty Type Standard CylinderBN-6102 series

Compact Pneumatic CylinderBN-6ST series

(Feature)Compact designThe switch and the solenoid valve can be installed.

(Specification)Fluid AirWorking pressure 0.1 1.0MPaOperation type Double actingBore size(mm) 40 50 63 80 100

125 150(Option)

Switch set Solenoid valve set

(Feature)The rod point of the female screw and the male screw can be delivered at once. Steel is used in many main components.

(Specification)Fluid AirWorking pressure 0.1 0.8MPaOperation type Double actingBore size(mm) 40 50 63 80 100

125 140 160 180 200230 250 270， 300

(Feature)Models with female and threaded rod tips is

immediate delivery.All standard models are equipped with the magnet

for switch.(Specification)

Fluid AirWorking pressure 0.1 1.0MPaOperation type Double actingBore size(mm) 12 16， 20， 25， 32

40， 50， 63(Option)

Special Rod Tip. Switch set Available support mounting types LB FA FB CB

BN-6A series BN-6AK seriesTwin Guides Cylinder

(Feature)High accuracy, high rigidity, and easiness to usewere pursued.Two types are prepared, sliding bearings and linear guidebushing bearings

(Specification)Fluid AirWorking pressure 0.1 1.0MPaOperation type Double actingBore size(mm)BN-6A series : 20， 32， 40， 50， 63， 80BN-6AK series : 12， 16， 20， 25， 32， 50

(Option)Switch set Solenoid valve set (BN-6A series)

－1－

ActuatorStandard CylinderBN-6105 series

Three Guides CylinderBN-6D series(Feature) The directionality of the allowable eccentric load was

lost by three guide rods.Two types of lift type and table type.

(Specification) Fluid Air Working pressure 0.1 1.0MPa

Operation type Double actingBore size(mm) 63 80 100

(Option) Switch set Solenoid valve set

Automatic turn lifter with rotary cylinder.

BN-6G seriesTwin Guide Slider

(Feature)

(Specification)Fluid AirWorking pressure : 0.1 1.0MPaOperation type : Double actingBore size(mm)

BN-6G-V series : 25， 32， 40， 50， 63BN-6G-H series : 25， 32， 40

(Option)Switch set

BN-6045B(6045BT) series

Shockless Stopper Cylinder

(Feature) The built-in shock absorber softly catches and stops

the work carrier.Three kinds of shock absorbers of lightness, standard andstrength can be selected.

(Specification)Fluid AirWorking pressure 0.2 1.0MPaOperation type Double acting with spring.Bore size(mm) 20 32， 50

(Option) Switch set Solenoid valve set

Stopper Cylinder With RollerBN-6021B(6021BT）series(Feature) The roller of the rod tip stops a carrier.

It is possible to move separately without pushingup the transportation thing.

(Specification) Fluid Air Working pressure 0.2 1.0MPa

Operation type Single acting (spring push type)Bore size(mm) 32， 50（ 50 only 6021BT）

(Option) Solenoid valve set

－2－

・It can be variously combinations to suit the application.・It is suitable for such as press-it of the parts, a fixation,

cutting, moving and lift of works.・Single sale of the slide block is possible.

Actuator

－3－

Direct Stopper CylinderBN-6003B series(Feature) Cylinder and rod are designed solidly in order to endure

a big horizontal load.This stopper cylinder is suitable for the heavytransportation thing heavy, and storage.

(Specification) Fluid Air Working pressure 0.2 1.0MPa

Operation type Double actingBore size(mm) Φ32 Φ50

(Option) Switch set Solenoid valve set

BN-6046B series(Feature) It is a horizontal stopper cylinder that suppressed height

for the heavy weight transportation.It is suitable as the stopper for acumurating line,the aging line, and the multistep conveyer.

(Specification) Fluid Air Working pressure 0.15 1.0MPa

Operation type Double acting Bore size(mm) Φ50(Option) Switch set Solenoid valve set

Horizontal Shockless Stopper Cylinder

Pressure gaugeBN-PG series(Feature) ･ Analog display(Specification) Fluid Air Working pressure 0 1.0MPa Diameter of the display panel.(mm) Φ40 Φ50･ Piping position : Back ･ bottom

Port size R1/8 R1/4

Digital Pressure gaugeBN-PDG60PL-F1 serise(Feature)･ Diameter of the display panel.

(Specification)Fluid AirWorking pressure 0 1.0MPa

Battery ：CR2032 Lithium battery ･Weight：40g ･ Piping position : Back

Port size R1/8(Option) ・Mounting bracket・Panel installation adapter

Actuator

Pneumatic Equ pment

－4－

Air Control Unit

Air Control Unit

(Feature)Modular connection by special attachment.Metal bowl.With pressure gauge and bracket.Drain valve opens automatically when pressure decreaseto 0.05MPa and below so that the drain shall be discharged.Port size Rc1/4 Rc3/8 Rc1/2

(Filter, regulator & lubricator unit)･ BN-25T6series，BN-25T5series

(Regulator W/Filter) (Air filter)BN-3RT5F series BN-27T5 series

(Regulator) (Lubricator)BN-3RT5 series BN-23T5 series

(Modular Type)

(Feature) Modular connection by special attachment.

With pressure gauge and bracket.Drain valve opens automatically when pressure decreaseto 0.05MPa and below so that the drain shall be discharged.Port size Rc1/4 Rc3/8

(Filter, regulator & lubricator unit)BN-25T2 series

(Regulator W/Filter) (Air filter)BN-3RT0F series BN-27T0 series

(Regulator) (Lubricator)BN-3RT01 series BN-23T0 series

(Compact Modular Type)

(Feature) Modular type with compact design.

Port size Rc1/4(Filter, regulator & lubricator unit)

BN-25T20 series(Regulator W/Filter) (Air filter)

BN-3RT21F series BN-2720 series(Regulator) (Lubricator)

BN-3R21 series BN-23T20 series

(Compact Type)

Air Control Unit

(Feature) The large-capacity air control unit.(Filter, regulator & lubricator unit)

BN-2501 series Port size Rc1/4 Rc3/8 Rc1/2 Rc3/4 Rc1(Air filter) BN-2701(2700) series

Port size Rc1/4 Rc3/8 Rc1/2 Rc3/4Rc1 Rc1 1/2

(Regulator) BN-3R01 series Port size Rc1/4 Rc3/8 Rc1/2 Rc3/4 Rc1(Lubricator) BN-2301 series Port size Rc1/4 Rc3/8 Rc1/2 Rc3/4

Rc1 Rc1 1/2

(Large-Capacity Type)

Air Control Unit

Pneumatic Equ pment

－5－

Air Control UnitBN-25T0 series(Feature)

Compact and high efficiency that unifiedthree functions of F R L on coax.As there are few parts for use,it is low cost.With pressure gauge and bracket.Drain automatically when depressurized below 0.05MPa.

(Specification)Port size Rc1/4 Rc3/8Working pressure 0.05 1.0MPa

Silencer

BN-2606 / BN-26T01 series

BN-2600 series(Specifications)

Fluid AirWorking pressure 0 1.0MPaMaterials Resin(R1/8) Aluminum(R1/4 Rc1 1/2)Port size R1/8 R1/4 R3/8 R1/2

Rc3/4 Rc1 Rc1 1/2

(Specifications)Fluid AirMaterials Resin(BN-2606)，Brass(BN-26T01)Working pressure 0 0.9MPaPort size BN-2606 : R1/8 R1/4

BN-26T01 : M5 R1/8 R1/4

BN-3RT1100 series(Specifications)

Fluid AirWorking pressure : 0 1.0MPa・Setting pressure 2K : 0.005～ 0.2MPa

4K : 0.01～ 0.4MPaPort size PT1/8

Precision reducing valve

BN-3LK series(Feature)・It is light weight, a compact reducing valve・Port size : Rc1/4（no coupling）

: One-touch coupler(Specifications)

Fluid AirWorking pressure : 0 1.0MPa (L5 standard)

: 0 1.5MPa (K15): 0 2.5MPa (K25)

・Setting pressure : 0.1 0.5MPa (L5: 0.3 0.9MPa (standard K15 K25

Weight : 80g（no coupling）: 160g（One-touch coupler）

Hand reducing valve

Pneumatic Equ pment

－6－

Speed ControllerBN-2800 series

(Specifications) Fluid Air Working pressure 0 1.0MPa

Port size Rc1/4 Rc3/8 Rc1/2Rc3/4 Rc1 Rc1 1/2

BN-12 seriesPressure Switch

(Specifications)Fluid Air

BN-1217TPort size R1/8Range of set press 0.1 0.7MPa

BN-1213Port size G3/8Range of set press 0.03 0.3MPa

BN-1218Port size G3/8Range of set press 0.1 0.8MPa

BN-1252Port size R3/8Range of set press 0.5 2.0MPa

BN-1254Port size R3/8Range of set press 2.0 4.0MPa

Flow SwitchBN-13 series(Specifications)

Fluid WaterBN-1321

Port size Rc3/8 Rc1/2Working flow rate 5 20L/min

BN-1321LPort size Rc3/8 Rc1/2Working flow rate 0.8 5L/min

BN-1311Port size Rc3/4 Rc1 Rc1 1/2Working flow rate 10 45 L/min(Rc3/4)

15 55 L/min(Rc1) 25 120L/min(Rc1 1/2)

Foot SwitchBN-1411 series(Feature) Compact design.

Foot Switch with the lock mechanism is lockedby pedaling the switch. Pedal the switch againfor releasing the lock.

(Specifications) Contact ratings 1a1b contact

AC125 250V 10ADC125V 0.5A DC250V 0.25A

(Option) Pedallock

Protection cover

Pneumatic Equ pment

－7－

Model NH-503J2 NH-5L3

Model NI-505

(Feature)Drained surely.

(Specifications) Air port size Rc1/2

Drain port size G1/4Working pressure 0.15 1.0MPaDrain discharge 10cm3/once (NH-503J2)

24cm3/once (NH-5L3)

(Specifications)Air port size NPT3/4Drain port size NPT1/4Working pressure 0.07 2.1MPaDrain discharge 250cm3/once

Drain Trap

BN-9L21H series(Specifications)

Fluid AirWorking pressure : 0 1.0MPa（BN-9L21 series）

: 0～ 4.9MPa（BN-9L21H serise)Port size Rc1/4 Rc3/8

Rc1/2 Rc3/4 Rc1

Check Valve BN-9L series

(Feature)Use pressure for primary side is 1.4 Mpa.

Compatible models for1.4MPa of working pressure

Air filterBN-2720H 27T5H 2701H1 series(Specifications)

port size Rc1/2, Rc3/8Working pressure 0 1.4MPa

Reducing valveBN-3R01H1 series(Specifications)

port size Rc1/4, Rc3/8Working pressure 0.05 1.4MPa

Drain trapNH-503 2H series(Specifications)

Air port size Rc1/2Working pressure 0.15 1.4MPa

Pressure gaugeBN-PG50-15K series(Specifications)

Air port size Rc1/4，Rc3/8Working pressure 0 1.5MPa

Pneumatic Equ pment

－8－

BN-7GT seriesway Solenoid Valve

3 way Solenoid Valve

2 way Solenoid Valve

BN-763PB

BN-7M31

BN-717C / 717B series

BN-7K23 series

BN-7A21 series

BN-5BP21 series

BN-700V series

(Feature)15mm valve widthTwo types of the direct connection typeand base connection type

(Specifications)Valve style : Pilot operated 2-position 5-port valvePort size M5 (Direct connection type )

Rc1/8 (Base connection type )Working pressure 0.15 0.8MPa

3-Ports direct operated valveOperating pressure 0 0.7MPaPort size Rc1/4

3-Ports direct operated valvePanel installation typeWorking pressure 0 0.8MPaPort size Rc1/4

Direct operated (BN-717C) Pilot operated (BN-717B)Operating pressure 0 0.7MPa (BN-717C)

0.1 0.8MPa (BN-717B)Port size Rc1/4 Rc3/8 (BN-717C)

Rc3/8 Rc1/2 Rc3/4 Rc1 (BN-717B)

2-Ports pilot operated valveOperating pressure 0.03 1.0MPaPort size Rc3/4 Rc1 Rc1 1/2

2-Ports direct operated valveOperating pressure 0 0.7MPaPort size Rc1/2 Rc3/4 Rc1

Air operated 2-port valveOperating pressure 0 1.0MPaPort size Rc1/2 Rc3/4 Rc1 Rc1 1/2

2-Ports direct operated vacuum valveWorking pressure 1.3×10-5 1.0×102 KPa(abs)Port size Flange 15A 25A (JIS B2290)

BN-7G series

BN-7V series

BN-7M series

BN-76 series

26mm valve width (Rc1/4)30mm valve width (Rc3/8)Port size Rc1/4 Rc3/8

Pilot operated large-capacity valvePort size Rc1/4 Rc1 1/2Explosion proof (Option), Differencial voltage

Pilot operated large-capacity valvePort size Rc1/4 Rc1

15mm valve widthPort size M5 (Direct connection type )

M5 Rc1/8 (Base connection type )

Directional C Valve

－9－

Foot ValveBN-4P series(Feature) Compact design.

4-Ports (BN-4PA41) 3-Ports (BN-4PA31)and 2-Ports (BN-4P20)Foot Valve with the lock mechanism is lockedby pedaling the valve. Pedal the valve againfor releasing the lock.(Only 4PA series)

(Specifications) Port size BN-4PA series Rc1/4(IN OUT) Rc1/8(EX)

BN-4P20 Rc1/4Working pressure 0 0.7MPaEffective area 8mm2(4PA series) 6mm2(4P20 series)

(Option) Lock mechanism (Only 4PA series)

Protection cover (Only 4PA series)

BN-7KV series(Feature) Super power-saving form that adopted a special magnet

Compact and large-capacityThe coil does not run hot.

(Specifications) 2-Ports direct operated valve

CV value 0.45 Port size Rc1/4

Working pressure 1.3×10-6Pa 2.0×105Pa (abs)Delay time 1 8 sec

Vacuum Breaking Valve (Timing Valve)

Manual ValveBN-4H41C series

BN-4HT-T/B series

(Feature) Three kinds of the side mounting (XA),

bottom mounting (XB) and bottom mounting on panel.(PB)(Specifications) 3-position 4-ports valve

Port size XA Rc1/4 Rc3/8 Rc1/2 Rc3/4 Rc1XB PB Rc3/8

Working pressure 0 0.7MPa

(Feature) 2-position 4-ports valve

Lever type, and possible to switchregardless of pressure.

(Specifications) Port size Rc1/4 (IN OUT) Rc1/8 (EX)

Working pressure 0 0.9MPa

(Feature) Two kinds of the 3-Ports(4HT31) and 4-Ports(4HT41).

Two kinds of the button type (B), and toggle type (T).(Specifications) Port size 3-ports valve Rc1/8

4-ports valve Rc1/8(IN OUT M5(EX)

Pneumatic Equ pment

－10－

Refrigerated Air Dryer

80 series(Feature) Pressure Dew Point 10

Tube-In-Tube heat exchangerOzone-safe refrigerant R-134a R-407C

(Model ) NH-8007N NH-8012N NH-8018N NH-8028N

NH-8040B NH-8060B NH-8085B NH-80120BNH-80155B NH-80210B

(Option) Available for High Pressure Model (Max 1.4 MPa)

80K series (High Pressure)(Feature) Working pressure MAX，4.99MPa(Model) NH-8018K50D NH-8040K50D NH-8060K50D

NH-80120K50D

Refrigerated Air DryerNDK series

(Feature) Ozone-safe refrigerant R-134a R-407C(Model ) NH-NDK22 NH-NDK37 NH-NDK75 NH-NDK110

NH-NDK150 NH-NDK220 NH-NDK370(Option) Available for middele Pressure Model (Max 1.4 MPa)

(High temperaure inlet air type)

(Feature) A choice of five elements allows you to design

a system that delivers the air quality that you required.・Because is a plug-type element, exchange is

easy; of the exchange.・ I improved reliability of the automatic drain by

capturing garbage causing the poor automaticdrain operation in an element. It is supplied withall size except the NH series.

Specifications) Port size Rc3/8 Rc2 1/2 Working pressure 0.14 1.72MPa

Air Filter with Enhanced Performance

Air Cleaning System

－11－

Membrane Air Dryer

(Feature) Compressed air, saturated with water vapor,

flows through a bundle of tube-shaped membranes.Water vapor passes through the membrane wallsKeep the dryer clean and oil free with pre-filterNI Series filters and receive years of trouble-freeservice for a long time.

(Model ) NI-HMD20-3 NI-HMD20-4 NI-HMD20-5

NI-HMD20-6

High pressure filter(Features )

Max working pressure : 4.83MPaPossible to build air clean system at high pressureusing by HPET series

(Model)3300 serise 3μm3100 serise 1μm1300 serise 0.01μm1500 serise 0.025μm

(Specifications)Port size Rc3/8 Rc2Working pressure 0 4.89MPa

Desiccant Air Dryer(Feature) The desiccant can reduce the water vapor

from the compressed air.The dry purge air pulls (desorbs) moisture fromthe desiccant and carries it out of the dryer.Have a lower initial cost than heated type dryers.

(Model ) NH-DH13 NH-DH25 NH-DH43 NH-DH64

NH-DH110 NH-DH175 NH-DH250

大気圧力の水蒸気

圧縮空気入口

圧縮空気出口

水蒸気出口

水蒸気出口

Air Cleaning System

－12－

Nitrogen Gas Generator

(Features )The adsorbent reduces the oxygen from atmosphere, and the purityhigh nitrogen is generated.The compressor mounted type, Large size type.

series

NI-HPET series (High Pressure)(Feature) Working pressure MAX. 4.99MPa・it adopt a plate-type heat exchanger・Easy to perate by LED dew point indication meter

(Model)

NI-HPET0.5B NI-HPET0.75B NI-HPET1.0B

N -HPET1.5B NI-HPET2.5B NI-HPET3.5B Specifications)

Port size Rc1 Rc1 1/2 Working pressure 2.1 4.99MPa

(Specifications)TMM Serise

Purity 99% 4 N /min at 0.2MPaPurity 99.9% 2 N /min at 0.2MPaPurity 9.99% 1 N /min at 0.2MPa

T SerisePurity 99% 12 55 N /min at 0.4～ 0.47 MPaPurity 99.9% 9 43 N /min at 0.4～ 0.48 MPaPurity 99.99% 6 30 N /min at 0.5～ 0.55 MPa

TM SerisePurity 99% 55 87 N /min at 0.55 MPaPurity 99.9% 40 62 N /min at 0.55 MPaPurity 99.99% 30 45 N /min at 0.55 MPa

Pneumatic Applied Cleaning System

Air Cleaning System

－13－

Jet Cooler(Features )

No use of electricity and refrigerant.Cooled air is generated by supplying thecompressed air.The generated cooled air is readily used for spotcooling in many fields.

(Model )Type N (Temperature Drop 40 Type)BN-VT150N BN-VT300N BN-VT600N

Type K (Temperature Drop 60 Type)BN-VT150K BN-VT300K BN-VT450K BN-VT600K

(Option)Hose Joint Flexible Hose Magnet TableSilencer (K Type only)

(adjustment method of the cold wind temperature)The adjustment of the cold wind temperatureis an adjustment screw in the main body edge.Please adjust it. When loosen an adjustmentscrew, cold wind temperature. But, Iwithdraw, and quantity of cold windair decreases. Cold wind temperaturerises when I close it, and quantityof cold wind air increases.

Temperature conditioning Air Dryer(Features) The refrigerated dryer can control outlet

air temperature.(Specifications)

Quantity of processing air 700 L/min(ANR)Outlet air dew point 10Outlet air temperature adjustment range 10 30

(Use) Bearing supply air of the precision processing machineSupply air to the control panelThe temperature test of electronics

(Features) Cooling compressed air to around 10 degrees.The cooling unit generates the compressed airand cools around 10 degrees C.Pressure dew point is 10 degrees C.

(Specifications) Quantity of processing air

0.27 4.70m3/min(ANR) 50 z0.33 5.66m3/min(ANR) 60 z

Port size : Rc1/2 Rc2

Cool X

Pneumatic Applied Cleaning System

Hot wind generatorBN-SJ serise

(Features) By suppying the compressed air, it generatesthe hot air with Max 800 degrees C.As it is a palm size at approximately 60g, varioussetting places are no problem.Easy to set up by the dedicated stands.Blowing a hot on an objetct, it is available bynon-contact comfortably.

(Model )BN-SJ350-E-100-A, BN-SJ350-E-100-BBN-SJ350-E-100-C

(Specifications) Working pressure 0.1 0.6MPaQuantity of processing air 5 60 /minPower supply AC100V 50/60Hz 1ΦPower consumption 350WPort size Rc1/8

(Option)ControllerStands

Drain water treatment equipmentTND-30(Features)

Because I adopt a method to naturally drop, structure is easyIt is small and light, and installation is easy. Possible to carryalone and the easy installation.Surely removal from drain to fresh water with less than 5ppm ofoily content owing to the two steps of special fiberand activated carbon..DRAIN REMOVER removes oil included in drain,I am less than effluent standard oil content density ofWater Pollution Control Law 5ppm I will have purification water.

(Specifications)Horsepower of the compressor for : 22kwConnection: plug for hose and water supplyDimension Φ305 H355mmMeasurements: approx 5.2 kg of weight(at the time of adsorption materials drying)

Life judgment indicationcompressor Exchange time7.5kw 15kw 22kw

20 months10 months6 months

※ at 8 hours a day and 25 days a month※ Needed to replace the completed units. Only replacement of the absorbent is impossible.

－14－

Pneumatic Applied Cleaning System

CATNo.Ｓ-05-19-R2※この商品ダイジェストの内容は予告なしに変更する場合がありますのであらかじめご了承ください。

URL:http://www.nihonseiki.com〒５８１-００１６大阪府八尾市八尾木北2丁目8番地2-8,Yaogi-kita,Yao,Osaka-shi, Osaka,581-0016,JapanTEL.０７２-９２３-０４８１ FAX.０７２-９９４-３６０３

〒５８１-００１６大阪府八尾市八尾木北2丁目8番地2-8,Yaogi-kita,Yao,Osaka-shi,Osaka,581-0016,JapanTEL.０７２-９２３-０４８１ FAX.０７２-９９４-３６０３

〒１４3-００２７東京都大田区中馬込1丁目16番23号1-16-23,Nakamagome,Ota-ku,Tokyo,143-0027,JapanTEL.０３-３７７７-６１１１ FAX.０３-３７７７-６１１６

〒４６０-００２２愛知県名古屋市中区金山5丁目11番6号名古屋ｿﾌﾄｳｪｱｾﾝﾀｰﾋ゙ ﾙ3階3B-35-11-6 Nagoyasofutoueasenta-Bld.3kai3B-3,Kanayama,Naka-ku,Nagoya-shi,Aichi,460-0022,JapanTEL.０５２-８８４-７５８２ FAX.０５２-８８４-７５８３

本 社・工 場Headquarters& plant

大阪営業 所Osaka office

東京営業所Tokyo office

名古屋営業所Nagoya office