Quick Installation Guide for ADSL User

1. Connect your HG553 to your computer via an Ethernet cable.

2. Get your HG553 connected to your ADSL cable and switch it on.

3. Input http://192.168.0.1 in the address bar of your Internet browser

username: admin

password: admin

Note: some of the HG553s default password may become VF-EShg553 after factory default

reset.

4. Click Advanced Setup on left column, then click ADSL uplink and Next button:

5. Click Edit button:

Quick Installation Guide for ADSL User

6. Change VPI/VCI value from default 0/44 to 8/35. Please contact your ISP if it is different.

7. Select PPP over Ethernet (PPPoE) and Click Next:

Quick Installation Guide for ADSL User

8. Input Username and Password provided by your ADSL service provide, PPPoE Service

Name is optional to input:

9. Change the connection name (optional):

10. Click Save button to finish the installation: