Qui trinh van hanh UMG8900

HNG DN VN HNH, BO DNG, X L S CCNG TY THNG TIN VIN THNG IN LC

M hiu : Ln ban hnh : 01 Ln kim sot : 01 Trang : 1/32

THIT B UMG8900

1. Mc ch: Gip nhn vin vn hnh nm c cu hnh, nguyn l hot ng, phng thc vn hnh, cch thc bo dng thit b UMG8900, c th kim tra x l c cc li thng gp trong khi vn hnh 2. Ti liu tham kho: 1/ HEDEX_UMG8900 Product Documentation(V200R008) 2/ UMG8900 Training Slide 3. Ni dung:CHNG 1 S LIU K THUT.............................................................2 CHNG 2 CU TO V NGUYN L CA UMG8900..........................................4 GII THIU PHN CNG H THNG...............................................................................4 Cabinet:.................................................................................................................................4 Frame:...................................................................................................................................4 SSM-256 and SSM-32 cascading: UMG8900 c th h tr cc ch cascading gia cc frame: SSM-256 self-cascading, SSM-32 self-cascading, v SSM-256 and SSM-32 mixed cascading. Trn h thng hin ti l ch SSM-256 and SSM-32 mixed cascading nn ta ch quan tm n mode ny..................................................................................................5 NGUYN L HOT NG.................................................................................................15 Nguyn l LOGIC...............................................................................................................15 Cu trc phn mm.............................................................................................................19 CHNG 3 HNG DN VN HNH V BO DNG..............................................20 THNG TIN CU HNH THIT B.....................................................................................20 Cc lnh cu hnh chnh......................................................................................................20 Thng tin a ch IP.............................................................................................................26 VN HNH, BO DNG THIT B................................................................................27 Kim tra mi trng lm vic ca thit b..........................................................................27 Kim tra trng thi hot ng ca thit b...........................................................................27 Gim st cnh bo v x l mt s li thng gp.............................................................28 Backup v Restore h thng(thao tc Backup v Restore do nhm CN thc hin)...........29

1

QUY TRNH VN HNH , BO DNG, X L S C THIT BCng ty thng tin Vin thng in Lc


UMG8900

CHNG 1-

S LIU K THUT

UMG8900 l thnh phn chuyn mch trong h thng WCDMA bt u t phin bn R4:

Hnh: V tr UMG8900 trong h thng WCDMA Tn thit b: Universal Media Gateway 8900 K hiu thit b: UMG8900 Nh sn xut: Huawei- Trung Quc Version: UMG8900V200R008C03SPC100 Bao gm 01 t thit b MGW, 01 t ODF UMG t dy phng thit b, trm 500KV Nng cc v tr nh s sau:-

2



UMG8900

Hnh 1: S h thng MGW trong phng thit b. - 1 t MGW: l t tch hp bao gm 2 frame: Frame 0(Frame chuyn mch trung tm) loi SSM256 v Frame 1(Frame iu khin chnh) loi SSM32. - 1 t ODF UMG: gi ra dy port quang ca board cp port STM1 MS2L v board cp giao din GE MHRD u ni i cc hng. - Gi DDF cung cp giao giao din port E1.

3



UMG8900

CHNG 2

CU TO V NGUYN L CA UMG8900

GII THIU PHN CNG H THNG Cabinet: - H thng UMG8900 c lp trong t N68-22 ca Cng ty Huawei. - T N68-22 c rng bn trong l 46U (1 U = 44.45 mm). Bao gm: frame phnphi ngun; frame tch hp SSM; khay cp tun theo tiu chun IEC297.

Frame: - UMG8900 h tr 2 loi frame: frame SSM256 v SSM32. SSM256: h tr chuyn mch TDM 256K, c cu trc ging vi frame SSM32 nhng khc backplane v cc board c cu hnh.

-

Hnh 2: S b tr cc board trong frame SSM256. Board NET ch c lp vo back frame Slot 7,8.

-

Board OMU/ MPU c cu hnh front slot 7,8; MOMU trong main control frame v MMPU trong cc frame khc. Board TNU ch c cu hnh backslot 6, 9. Board vt l tn l MTNB. Board ti nguyn dch v, nh MVDP c th cu hnh front slot 6, 9. Board x l dch v c th cu hnh cc common slot. Board CLK ch c th c cu hnh backslot 0,1 trong main control frame. SSM32: h tr chuyn mch TDM 32K hoc 96K

4



UMG8900

Hnh 3: S b tr cc board trong frame SSM32. -

-

-

Board iu khin chnh OMU(Board vt l: OMB) v back board tng ng TNU(TNC) chim 2 slot 6,7 v 8,9. Board OMB c cu hnh trong main control frame v board MPB trong cc frame khc. Nu frame SSM32 ch yu cu tn hiu clock mc 3 th khng cn ngun cp tn hiu ng h ring; nu frame SSM32 yu cu tn hiu clock mc 2 th phi c ngun cp tn hiu ng h ring. Board CLK ch c th cu hnh back slot 0,1 frame 0,1. Board x l dch v c cu hnh cc slot common. Board NLU c th c cu hnh slot 4, 5, 10, 11 thc hin kt ni d liu gi gia cc frame bng giao din GE.

SSM-256 and SSM-32 cascading: UMG8900 c th h tr cc ch cascading gia cc frame: SSM-256 self-cascading, SSM-32 self-cascading, v SSM-256 and SSM-32 mixed cascading. Trn h thng hin ti l ch SSM-256 and SSM-32 mixed cascading nn ta ch quan tm n mode ny.

5



UMG8900

Hnh 4: SSM-256 and SSM-32 mixed cascading.

Nu UMG8900 s dng c 2 loi frame SSM256 v frame SSM32 th n c th h tr cascading n 29 frames. Khi UMG8900 phc v cho VMSC th n cn kt ni vi SIWF frame cung cp chc nng IWF. V logic, frame UMG8900 c chia thnh cc loi: frame iu khin chnh, frame dch v, v frame chuyn mch trung tm. Frame chuyn mch chnh lun c nh s 1, frame chuyn mch trung tm lun c nh s 0. Frame dch v c nh s t 2 n 28. Frame chuyn mch trung tm l frame SSM256, frame dch v c th l frame SSM256 hoc frame SSM32. Khi UMG8900 s dng c frame SSM256 v frame SSM32 th knh cascading TDM v FE sn sng kt ni cc frame. UMG8900 cung cp kh nng cascading 1/2/4 x 8K TDM v 1 x FE kt ni frame chuyn mch trung tm SSM256 v cc frames SSM32. UMG8900 cng h tr cascading GE gia cc frame. Board NLU phi c cu hnh trong frames SSM32. LMT c ci t trn my PC thc hin cc thao tc: vn hnh v bo tr, cu hnh d liu, qun l thit b. LMT kt ni vi giao din OMC trong frame iu khin chnh.6



UMG8900

Chc nng ca cc board: S b tr cc board trong t UMG nh sau:DNG_MGW_ 01-001/A02 UMG8900 Master Cabinet 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 2U Power Distribution Frame

12U

Filler Panel

2U 0 1 2 3 4 5 6 MTNB

Filler Panel 7 MNETb 8 MNETb 9 MTNB 10 11 12 13 14 15Back

MMPU

MMPU

Central Switching Frame (0)

12UFront

2U 0 MCLKc 1 MCLKc 2 MS2Lb 3 MS2Lb 4 MNLU 5 MNLU 6

Filler Panel 7 MTNC2b 8 MTNC2b 9 10 MHRD2 11 MHRD2 12 MHRD2 13 MHRD2 14 ME32b 15 ME32b MVPDbBack Front

MOMBb

MOMBb

MVPDb

MVPDb

2U 2U

Filler Panel Filler Panel

Hnh 5: S board trong t UMG7

MVPDb

MSPFc

MSPFc

Main Control Frame (1)

12U



UMG8900

Central Switching Frame:-

MMPU: l board x l chnh ca frame, board MMPU master v slave c cu hnh front slot 7 v 8 trong tt c cc frame tr main control frame, MMPU tng ng vi back boad MNET, ch c th cu hnh frame SSM256, khng cu hnh c trong SSM32. MMPU c chc nng: Cung cp chc nng chuyn mch trn giao din FE trao i thng tin iu khin gia cc boards trong frame khi l single frame v trao i thng tin iu khin gia cc frame, qun l giao din trong cascading khi l multiframe. Gim st v qun l tnh trng cc board trong frame. Thc hin gim st trng thi v qun l ngun bt/tt trn thit b thng qua module Mbus. MMPU cung cp giao din bn tin H.248. Giao din ny c s dng iu khin ti nguyn tng tc gia MMPU v MGC, adaptation ca giao thc H.248, bao gm x l gii m text ca giao thc H.248, cng nh adaptation ca 3 ch truyn bn tin: TCP/UDP/SCTP. MMPU cung cp chc nng iu khin: thc hin qun l v khi to ti nguyn chuyn pht dch v, ti nguyn x l a phng tin. Qun l v iu khin ti nguyn TDM, IP, pht cu thng bo, v cc ti nguyn dch v khc theo bn tin H.248 t MGC. MMPU hon tt vic thit lp cc knh mang dch v di s iu khin ca MGC.MNET: l thnh phn chuyn mch gi ca MGW, board MNET

-

master v slave c cu hnh back slot 7 v 8, ch c cu hnh trong frame SSM256; khng dng c trong frame SSM32. MNET c cc chc nng: Cung cp cc knh chuyn mch dch v gi trong frame trao i d liu dch v gia cc board dch v packet trong frame. Cascading 2 frames thay th cho board cascading chuyn dng. Module cascasding tch hp trong MNET cung cp kt ni 2xGE v 2xFE. iu khin d liu v qun l giao din tng ng vi front board l MOMU hay MMPU. Nhn tn hiu ng h t MCLK, gi n cc boards x l dch v TDM sau khi kha pha, truyn tn hiu v phn phi. MNET c 2 loi boards: UG01MNET v UG02MNET. im khc nhau l: UG01NET cung cp 16GE cascading, trong khi UG02MNET cung cp 24GE. Port FE trn UG01MNET bao gm FE0 v FE1.8



UMG8900

Port FE trn UG02MNET bao gm FE0, FE1&FE2, FE3&FE4. Chc nng ca port FE0 ging vi FE0 trn UG01MNET. Port FE1&FE2 v FE3&FE4 l 4 port network cascading.

-

MTNB: l thnh phn chuyn mch knh TDM ca MGW, Board MTNBs

master v slave c cu hnh v tr back slot 6 v 9 trong frame iu khin chnh, frame chuyn mch trung tm hay frame dch v, ch dng c trong frame SSM-256. Chc nng: Cung cp kh nng chuyn mch 8K hoc 2K hoc 1K trn board giao din, thit lp v gii phng timeslot TDM. Kt ni vi MTNB trong frame khc trc tip hay thng qua UG002MBLU vi cp quang multi-mode, cung cp kh nng cascading 32K. Qun l v bo tr board thng qua module Mbus, bo co tnh trng v version ca boards ln board iu khin chnh trong frame, thng qua giao din FE.

Main Control FrameMOMB: thnh phn vn hnh v bo tr ca UMG8900, board vt l c cu

hnh front slot 7 v 9 trong main control frame, tuy nhin v logic th slot 7 v 8. V mi board MOMB chim 2 slot v 2 board hot ng trong mode master v slave chim 4 slot t 6 n 9. MOMB c lp tng ng vi board MTNC nh mt cp. MOMB ch dng c trong frame SSM-32. MOMB c chc nng: Gim st v qun l cc board trong frame, MOMB ch c cu hnh trong main control frame. Board MMPB c cu hnh trong service frame qun l v bo tr cc board trong frame. Trong ch cascading nhiu frame, MOMB v MMPB s qun l v bo tr ton b thit b thng qua knh FE cascading gia cc frame. Cung cp card tch hp CF, chc nng nh BAM. CF card v LMT lm vic trong ch server/client. C th qun l v bo tr thit b thng qua giao din vn hnh ha MML c cung cp bi LMT. Card CF tch hp c th lu logs v alarm. MOMB c tch hp kh nng chuyn mch packet tc cao GE v thc hin chuyn mch d liu dch v qung b thng qua backplane. Board MOMB c 2 loi: UG01MOMB v UG02MOMB(ang dng). UG02MOMB tng thch vi UG01MOMB. Chc nng mi ca UG02MOMB l: Tch hp thm 2 subboards CMU.9



UMG8900

-

Module Mbus c tch hp iu khin ngun on, off, v reset subboard CMU. MTNC: thnh phn chuyn mch TDM ca UMG8900, board vt l c cu hnh back slot 7 v 9 trong main control frame v service frame, tuy nhin v logic th slot 7 v 8. V mi board MOMB chim 2 slot v 2 board hot ng trong mode master v slave chim 4 slot t 6 n 9. MTNC ch dng c trong frame SSM-32. MTNC c chc nng: Qun l chuyn mch dch v knh TDM. Cung cp kh nng chuyn mch timeslot 32K hoc 1K hoc 2K trn mi board giao din. Board UG02MTNC cung cp kh nng chuyn mch timeslot 96K hoc 1K, 2K, 4K trn mi giao din TDM. UG02MTNC h tr UG02MS2L v UG02MECU. UG01MTNC2 cung cp 1 lin kt cascading TDM v UG01MTNC5 cung cp 2 lin kt cascading TDM. Nu subboard TS1C, TS2C hoc TS4C c lp vo UG02MTNC th UG02MTNC tng ng c th cung cp 1, 2, 4 lin kt cascading TDM. Giao din kt ni cc frame thng qua cp quang. Mi giao din cascading cung cp kh nng chuyn mch timslot 8K. MNTC l trung tm chuyn mch ca khi iu khin, thc hin trao i message trong cc board trong khi iu khin. MTNC cung cp 3 kt ni cascading FE, trao i thng tin iu khin gia cc frame. MTNC cung cp tn hiu ng h 8KHz stratum-3 thng qua subboard stratum-3 clock. MTNC nhn 16 KHz stratum-2 clock c cp bi board stratum-2 clock v to ra tn hiu ng h theo yu cu h thng. MTNC c th chuyn tn hiu 8 KHz clock thng qua ng cascading gia cc frame, phn phi ng h h thng. MTNC cung cp chc nng qun l thit b. Bn cnh vic kt ni tt c cc board thng qua khi iu khin, MTNC cn thc hin bo tr board, qun l vic power-on v x l cc trng hp ngoi l thng qua module Mbus. MTNC c 2 loi: UG01MTNC v UG02MTNC(ang dng). UG02MTNC tng thch vi UG01MTNC. Khi UG02MTNC v UG01MTNC s dng cng lc, tt c cc chc nng ca UG01MTNC c th s dng. Khi UG02MTNC v UG02MTNC c s dng cng lc, c kh nng cung cp chuyn mch TDM 96K v ti a 4 x 8K TDM. Cc chc nng khc ging vi UG01MTNC. Tn trn panel ca UG02MTNC l MTNCb. UG02MTNC bao gm cc loi UG02MTNC1, UG02MTNC2, v UG02MTNC 4 c th cung cp tng ng 1, 2, 4 port cascading TDM.10



UMG8900

-

-

MVPD: l board x l thoi, c s dng trong frame SSM-256 v SSM-32. Trong frame SSM-256, MVPDs c cu hnh front slot 0 n 6 v 9 n 15 trong main control frame v service frame. Trong frame SSM32, MVPDs c cu hnh front slot 0 n 5 v slot 10 n 15 trong main control frame v service frame. Khi MVPD c lp trong frame SSM-256, MTNB phi c cu hnh trong frame SSM-256 cn MTNU th khng. MVPD gm 3 loi: UG01MVPD, UG02MVPD_VB v UG02MVPD_VC. C khc nhau l: UG01MVPD c tn MVPD trn panel. UG02MVPD c tn MVPDb trn panel vi n ch th ACT mi. Thng thng UG02MVPD h tr UG01MVDD subboard. UG02MVPD_VC tng thch vi UG20MVPD_VB. Thng thng UG02MVPD_VC h tr UG01MVDF subboard v UG01MECL subboard. MVPD cung cp cc chc nng sau: Pht announcement, digit collecting, audio mixing v MFC. Thc hin chuyn i d liu gi IP ca dch v thoi ty thuc vo giao thc UDP, RTP, IP. H tr cc ch m ha thoi khc nhau bao gm G.711A, G.711, G.723, G.726, G.729, AMR, EVRC, QCELP8K, v QCELP13K. X l IuIP v NbUP cng lc v tun theo giao thc 3GPP TS 25.415 TS29.415. iu khin ti nguyn v qun l board iu khin chnh. MSPF: l thnh phn x l bo hiu ca UMG8900, MSPF c cu hnh front slot 0 n 6 v slot 9 n 15 trong main control frame hoc service frame, lm vic ch load sharing. MSPF gm 2 loi: UG01MSPF v UG02MSPF. im khc nhau l UG01MSPF c th cu hnh c frame SSM256, cn UG02MSPF c th cu hnh c hai loi 256 v SSM32. MOMB hoc MMPB c cu hnh slot 6 hoc 9 trong frame SSM-32. V vy UG02MSPF khng th cu hnh slot 6 hoc 9. Tn trn front panel ca UG01MSPF l MSPF, UG02MSPF l MSPFb. MSPF c chc nng: Thc hin chuyn i tn hiu bo hiu TDM narrowband sang gi IP da vo giao thc SIGTRAN. Nhn bo hiu t chuyn mch TDM thng qua subboard v x l bo hiu TDM. Thc hin chc nng ca signaling gateway: h tr chuyn i bo hiu M3UA/M2UA/V5UA/IUA, chuyn tip bn tin n MGC.

11



UMG8900

-

MCLK l board clock, board master v slave MCLKs c cu hnh back slot 0 v 1 trong main controk frame. MCLK c th s dng trong frame SSM-256 v SSM-32. MCLK c chc nng:

Clock input: Nhn tn hiu u vo 2048 kbit/s hoc 2048 kHz t giao din ng b ngoi. Nhn 2 line clock vo t board giao din TDM. Nhn tn hiu v tinh t h thng GPS/GLONASS. Nhn tn hiu 1544 kbit/s, 64 kHz+8 kHz, hoc 64 kHz+8 kHz+400 Hz ca 1 knh t ngun ng h ngoi. Clock output: Gi 18 knh tn hiu ng h 16 KHz khc nhau theo chun RS422 n MNET hoc MTNC thng qua backplane trong main control frame v thng qua cp phn phi n cc frame khc. Gi tn hiu ng b ngoi 2048 kbit/s hoc 2048 kHz ca 1 knh. Cung cp tnh hiu 1544 kbit/s ca 1 knh. Cung cp tn hiu ng h output ca 1 knh cho board MNETs master v slave trong cng frame. H tr ch lm vic: board ng h master v slave ch c th truy nhp n 1 ngun ng b ngoi tham chiu. MCLK c 2 loi: UG03MCLK_VB v UG03MCLK_VD. UG03MCLK_VD cung cp tt c chc nng ca UG03MCLK_VB. Chc nng mi ca UG03MCLK_VD l: UG03MCLK_VD c th nhn tn hiu 1544 kbit/s, 64 kHz+8 kHz, hoc 64 kHz+8 kHz+400 Hz ca 1 knh t ngun ng h ngoi. UG03MCLK_VD c th gi tn hiu ngoi 1544 kbit/s ca 1 knh. Giao din 1,5 Mbit/s v 64 kbit/s c tch hp vo UG03MCLK_VD.-

MNLU: (Ghi ch: Trong frame SSM-32, 2 boards c cu hnh 2 slot i xng khng th s dng GE bus trn backplane cng lc. MNLU khng th cu

hnh i xng vi boards s dng bus GE nh MVPD. )L back board cascading trong h thng multiframe, MNLU c cu hnh back slot 4, 5, 10 v 11 trong main control frame v service frame, hot ng ch loadshare. MNLU ch s dng c trong SSM-32. MNLU c chc nng:

12



UMG8900

Cung cp knh d liu cascading dung lng 1x 1.25G cho dch v d

liu gi broadband. 1 cp MNLUs cung cp knh d liu cascading trc tip 2x 1.25G cho dch v d liu gi broadband. Self-Cascading trong frame SSM-32 thng port quang s 0 v ch multimode. Mixed-cascading trong frame SSM32 v SSM-256 thng qua port quang 0, 1 v ch multimode.

Interface Boards:-

MS2L: l board giao din dch v TDM, MS2Ls c cu hnh backslot 2 n 5 v slot 10 n 15 trong main control frame, v back slot 0 n 5 v slot 10 n 15 trong service frame. Trong frame SSM-32, nu subboard ng h ca MTNC cung cp ng h h thng, MS2L c th cu hnh back slot 0 v 1 trong main control frame. MS2L c th hot ng trong ch master v slave hay ch load-sharing. MS2L c chc nng: Gii nn tn hiu ng h v hnh thnh khung 2 giao din quang 155 Mbit/s SDH, cung cp giao din vi module quang tch hp vi cc khong cch truyn dn khc nhau. X l overhead phn regenerator v multiplex ca tn hiu quang v kim tra kt ni trn nhng knh quang. To khung 2x 63E1 hoc 2x84T1 v thc hin chuyn mch DS0. MS2L c 2 loi: UG01MS2L v UG02MS2L(ang dng). im khc nhau l: UG01MS2L ch s dng cho SSM-256. UG02MS2L c th s dng cho SSM256 v SSM-32. Tn UG02MS2L trn board l MS2Lb. Interfaces ca MS2L:Loi COM0 8K_OUT Service interface S lng 1 1 2 Giao din RJ48 RJ48 Chc nng Port serial x l li Tiu chun RS232 serial port

Cung cp giao din ra tn RS422 hiu ng h 8 kHz Giao din 155 Mbit/s STM-1

-

ME32: l board giao din dch v knh phn chia theo thi gian, ME32 c cu hnh back slot 2 n 5 v slot 10 n 15 trong main control frame, v back slot 0 n 5 v slot 10 n 15 trong service frame. ME32 gm 2 loi: UG01ME32 v UG02ME32(ang dng), tng i ging nhau v chc nng v hnh dng. im khc nhau l UG01ME32 ch c th s dng trong frame SSM-256, trong khi13



UMG8900

UG02ME32 c th s dng trong c 2 loi frames. Tn trn mt trc board ca UG01ME32 l ME32, UG02ME32 l ME32b. ME32 c chc nng: Cung cp giao din 32E1. Cung cp 32E1 frames. Cung cp giao din FE internal thc thi vic vn hnh, bo tr, v qun l ca board iu khin chnh. Tng tc vi board iu khin chnh thng qua module Mbus gim st nhit board, in p v iu khin hot ng on/off ngun. Cung cp ngun ng h 8kHz cho board ng h master/slave t panel board thng qua cp phn phi clock. Nhn thng tin SSM t giao din E1 v gi n n h thng clock. Cung cp dch v loopback lin kt cc mc v pht hin knh dch v trong board. Interface ca ME32.Loi 8K_OUT E1/T1_0-15 S lng 1 1 Giao din RJ48 DB100 Chc nng Cung cp tn hiu clock 8kHz Tiu chun RS422

Giao din E1 2M trong group 0, kt ni cp E1 t 0 n 15 Giao din E1 2M trong group 0, kt ni cp E1 t 16 n 31. -

E1/T1_16-31

1

DB100

MHRD: l board nh tuyn d liu gi tc cao trong frame SSM-32 v SSM-256. MHRD c th cu hnh trong back slot. Khi MHRD c cu hnh trong frame SSM-256. MHRD cn kt hp vi board UG02MNET. MHRD cung cp cc chc nng: MHRD x l nh tuyn IP, hi t v phn phi dch v IP. MHRD cung cp chc nng truy cp dch v nu subboard giao din D8FT hoc D1GO c lp vo. IFU c cu hnh trn MGW bo co CHRs. MHRD gm 2 loi: UG01MHRD1 v UG01MHRD2. Subboard D8FT c lp vo UG01MHRD1, cung cp 8 giao din FE. Subboard D1GO c lp vo UG01MHRD2, cung cp 1 giao din GE quang hoc 1 giao din GE in.14



UMG8900

D1GO Subboards(ang dng): cung cp 1 giao din GE quang hoc 1 giao

din GE in cho MHRD. Nu subboard D1GO c cu hnh vo 2 MHRDs, lm vic ch master/slave. Mc nh D1GO lm vic ch loadsharing. Tc l 1 MHRD c th qun l 2 subboard D1GO cng lc. NGUYN L HOT NG. Nguyn l LOGIC. UMG8900 truy cp v x l dch v chuyn mch IP/ATM/TDM, tng tc vi thnh phn iu khin(MGC), x l ti nguyn, chuyn i v truyn bo hiu. UMG8900 cng cung cp nhng chc nng tng t nh qun l thit b, bo tr, clock v cascading. Ty thuc vo chc nng v kin trc module phn tn, h thng phn cng UMG8900 c th chia ra cc module: module qun l v iu khin cng, module x l TDM, module ti nguyn dch v, module x l gi, module chuyn i bo hiu, module cascading. Nguyn l Logic ca frame SSM-256 v SSM-32 c s khc nhau:

Hnh 6: Cc thnh phn Logic trong frame SSM-25615



UMG8900

Hnh 7: Cc thnh phn Logic trong frame SSM-32 Gateway control and management module: c chc nng, Qun l v bo tr UMG8900. UMG8900 lm vic ch client/server. LMT kt ni vi BAM ca UMG8900 bo tr v qun l UMG8900. Di s iu khin ca MGC, module ny s khi to knh mang dch v v ti nguyn trong UMG8900, thit lp cc knh dch v v chuyn i nh dng lung d liu. Trung tm qun l v bo tr UMG8900 c th qun l tp trung thng qua BAM c tch hp trong OMU hoc OMB. Cc bn tin vn hnh v bo tr c trao i gia cc frame thng qua knh cascaded FE. PPU/CMU cung cp chc nng iu khin cng. OMU/MPU/TNC cung cp chc nng qun l v bo tr. PPU v CMU c th phi hp cung cp chc nng iu khin cng, c th cu hnh chc nng ny linh hot qua software. PPU phn tch v m ha lp mng v lp giao vn, phn tch cc lp giao thc H.248 v gi cc bn tin thc hin n CMU. CMU khi to v qun l ti nguyn trong UMG8900 da vo cc bn tin iu khin cng. Packet Processing Module c chc nng:16



UMG8900

X l packet v cc knh mang dch v packet ca UMG8900.

Cung cp giao din phn cng cho dch v gi. Module x l gi bao gm 2 phn: 1 l chuyn mch gi v phn khc x l gi v giao din. Module chuyn mch gi chuyn mch dch v gi ca UMG8900. Trong frame SSM-256, board NET cung cp chc nng ny, board vt l l MNET. Trong frame SSM-32, chc nng ny c tch hp OMU/MPU cng chc nng iu khin cng v qun l, board vt l ca OMU/MPU l MOMB/MMPB. Trong frame SSM-256, UG01MNET cung cp kh nng chuyn mch gi 16GE, UG02MNET cung cp kh nng chuyn mch gi 24GE. Trong frame SSM-32 module chuyn mch gi cung cp kh nng chuyn mch 12GE. Dch v gi cung cp bi UMG8900 theo giao thc l IP, ATM, IpoE1 tng ng vi loi board phn cng. Phn cng ca x l gi IP v module giao din bao gm HRB, E8T, E1G, P1H v P4L. Board tng ng l MRPU, MHRU, MIOE,

ME8T, MG1O, MP1H, MP4L, MHRD vi giao din subboards v MNET. MIOE v ME32 kt hp cung cp chc nng IP trn E1. Phn cng x l gi ATM v module giao din bao gm ASU, A4L, EAC, v TAC. Board tng ng l MASU, MA4L, MEAC v MTAC. HRB ly thng tin d liu gi thng qua back board v phn tch gi IP/IpoA, y vo b m. Di s iu khin ca module iu

khin, b m s chuyn cc gi tin vo cc board x l. Module x l gi c th chuyn tip giao thc H.248 , SIGTRAN, vn hnh v bo dng cng lc. HRB cung cp giao din ngoi gi v nhn 3 loi packet.

TDM Processing Module Module x l TDM bao gm: giao din TDM, x l clock, v chuyn mch TDM. Module giao din TDM cung cp giao din TDM cho UMG8900 v h tr cc ng clock nh l ngun clock. Module giao din TDM bao gm E32, T32, PIE, S2L v S1L. Board vt l tng ng l ME32,MESU, MT32, MTSU, MPIE, MS2L, MS1L, MS2E, v MS1E. UG01S2L ch c dng trong frame SSM-256. UG02S2L c th cu

hnh trong frame SSM-256, nu UG02S2L lm vic vi UG02TNC, UG02S2L c th cu hnh trong SSM-32. S1L ch dng c trong SSM-32. Module x l clock cung cp tn hiu clock theo yu cu ca UMG8900 v h tr truy nhp cc ngun clock khc nhau. UMG890017



UMG8900

h tr 2 ch clock : mt l cung cp clock thng qua CLK, CLK(MCLK) cung cp tn hiu clock stratum -2A hoc stratum-3; hai l cung cp clock thng qua TNU(MTNC), TNU ch cung cp tn hiu clock stratum-3, ch cu hnh c trong frame SSM-32. Module chuyn mch TDM chnh l TNU, trong frame SSM-256, board vt l tng ng l MTNU, TCLU, MTNB. Trong frame SSM 32 board vt l tng ng l MTNC. Service Resource Module c chc nng: Module ti nguyn dch v x l nh dng lung d liu v cung cp ti nguyn cho kt ni dch v. H tr cc nh dng m ha thoi G.711/G.723/G.726/G.729/AMR/WB-AMR, pht tone thngbo, thu thp cc s c nhp t phm bm, trit ting di, phi m. Phn cng x l chnh bao gm VPU v ECU. ECU cung

cp chc nng trit ting di, VPU cung cp chc nng pht tone, thu thp cc s t phm bm, phi m. Ngoi ra VPU c th cung cp cc chc nng ca ECU. Board vt l tng ng l MVPB, MVPD, MTCB, MTCD, MECU. Cc board trong module ny hot ng theo ch loadsharing v kt hp gia board chnh v subboard. Ty vo cc subboard c cu hnh, s lng subboard v phn mm, board c th cung cp cc chc nng khc nhau nh trn. MVPB v MTCB ch cu hnh c trong frame SSM-256. MVPD v MTCD c th cu hnh trong frame SSM256 v frame SSM32. MVPD tng thch vi cc subboard ca MVPB, v cc subboard mi VQE, VDD, VDF. Signaling Adaption Module c chc nng: Chuyn i bo hiu mng truy nhp v mng in thoi cng cng(PSTN) tng thch vi bo hiu ca mng gi IP. Module ny hot ng cng vi module x l TDM, module x l gi, module qun l v iu khin cng chuyn i v truyn bo hiu. Board vt l tng ng l MSFP. Board giao din TDM truy xut bo hiu trn tn hiu TDM v truyn bo hiu n SPF thng qua chuyn mch TDM internal. Giao din gia module chuyn i bo hiu v MSOFT l SIGTRAN. Trong trng hp ch c mt frame SSM-256 th giao din gi MIR trn back board NET c s dng, nu ch c mt frame SSM-32 th s dng giao din Mc trn main control frame. Nu cu hnh module x l gi, HRB s cung cp giao din.18



UMG8900

Trong trng hp nhiu frame SSM-256 cascading hoc mixed cascading, giao din OMC trn board NET trong central switching frame c s dng. Nu nhiu frame SSM-32 cascading, giao din OMC trn TNC ca frame dch v u tin c s dng. Cascading Module c chc nng: UMG8900 h tr cc ng dng vi cc kh nng khc nhau thng qua kt ni mt frame v nhiu frame. Module cascading cung cp cc kt ni packet, TDM v iu khin dch v lung d liu trong cascading nhiu frame. BLU(B: backboard) v FLU(F: frontboard) hot ng vi module x l gi v module x l TDM thc hin chc nng cascading. Board vt l ca BLU l MBLU, ca FLU l MFLU. BLU v FLU ch cu hnh c trong frame SSM-256. FLU v BLU cung cp cascading 3 x 8 K TDM v 4 x 8 K TDM, vi cascading 4 x 8 K TDM board vt l tng ng l UG02FLU v UG02BLU, phi hot ng vi TNB. Frame SSM-32 cng h tr board cascading khc l NLU(MNLU). NLU c s dng cascading GE gia cc frame SSM-32 v gia frame SSM-32 v SSM-256. Cu trc phn mm. Cu trc phn mm ca UMG8900 nh sau:

Hnh 8: Cu trc phn mm UMG8900

Phn mm ca UMG8900 bao gm phn mm host v phn mm LMT. Phn mm host thc hin x l dch v v qun l phn cng. Phn mm LMT v BAM hot ng theo ch client/server. Phn mm LMT thc hin bo tr v qun l trn host ca UMG8900.

19



UMG8900

CHNG 3

HNG DN VN HNH V BO DNG

THNG TIN CU HNH THIT B Cc lnh cu hnh chnh. Thng tin cu hnh thit b c lu trn b nh MEM v HARD DISK. xem cu hnh c th thc hin lnh DSP CFG:;(ty chn t MEM hoc HD) trn chng trnh LMT ca UMG. Thng tin cu hnh c lu di dng cc command c chy cu hnh thit b. Ch c mt s lnh s do h thng t sinh ra. Thng s mt s command trn cu hnh thit b UMG8900 DNG: System configuration in memory -----------------------------// Version software //UMG8900V200R008C03SPC100 //Add thm 1 frame SSM-256: central switching frame(frame: 0); main control frame(frame: 1) khng cn add, sau add cc board, subboard (CMU, PPU) trong cc frame. ADD FRM: FN=0, FV=SSM256, FT=SWITCH, SHF=0, LOC=MIDDLE; ADD BRD: FN=0, SN=6, BP=BACK, BT=TNU, HBT=TNB, BS=ONEBACKUP, BN=0; MOD FRM: FN=1, CM=SWITCHCAS, CN=DIRECT, GECAS=YES, GELSN=NLU4, GEPN=0, TDMCAS=YES, TDMPORT0=0, TDMPORT1=1, SHF=0, LOC=BOTTOM; ADD BRD: FN=1, SN=0, BP=FRONT, BT=VPU, HBT=VPD, BS=LOADSHARE, BN=0; ADD BRD: FN=1, SN=1, BP=FRONT, BT=VPU, HBT=VPD, BS=LOADSHARE, BN=1; ADD BRD: FN=1, SN=4, BP=FRONT, BT=SPF, HBT=SPF, BS=LOADSHARE, BN=1; ADD BRD: FN=1, SN=5, BP=FRONT, BT=SPF, HBT=SPF, BS=LOADSHARE, BN=2; ADD BRD: FN=1, SN=14, BP=FRONT, BT=VPU, HBT=VPD, BS=LOADSHARE, BN=2; ADD BRD: FN=1, SN=15, BP=FRONT, BT=VPU, HBT=VPD, BS=LOADSHARE, BN=3;20



UMG8900

ADD BRD: FN=1, SN=0, BP=BACK, BT=CLK, HBT=CLK, BS=ONEBACKUP, BN=0; ADD BRD: FN=1, SN=2, BP=BACK, BT=S2L, HBT=S2L, BS=LOADSHARE, BN=0; ADD BRD: FN=1, SN=3, BP=BACK, BT=S2L, HBT=S2L, BS=LOADSHARE, BN=1; ADD BRD: FN=1, SN=4, BP=BACK, BT=NLU, HBT=NLU, BS=LOADSHARE, BN=2; ADD BRD: FN=1, SN=10, BP=BACK, BT=HRB, HBT=HRD, BS=ONEBACKUP, BN=0; ADD BRD: FN=1, SN=12, BP=BACK, BT=HRB, HBT=HRD, BS=ONEBACKUP, BN=1; ADD BRD: FN=1, SN=14, BP=BACK, BT=E32, HBT=E32, BS=LOADSHARE, BN=0; ADD BRD: FN=1, SN=15, BP=BACK, BT=E32, HBT=E32, BS=LOADSHARE, BN=1; ADD OMUSUBRD: FN=1, SN=7, SUBBN=SBRD0, BT=CMU, BS=ONEBACKUP, BN=30; ADD OMUSUBRD: FN=1, SN=7, SUBBN=SBRD1, BT=PPU, BS=LOADSHARE, BN=0; ADD OMUSUBRD: FN=1, SN=8, SUBBN=SBRD1, BT=PPU, BS=LOADSHARE, BN=1; SET ENVTHD: VOLTH=-59, VOLTL=-40, MTRLGY=IMP, ITEMH=131, ITEML=41; // Thit lp thi gian UMG ly t NTP Server. SET TIMESYC: INFO=NTP; SET TZ: ZONET=GMT+0700, DST=NO; //Thit lp cc thng s ca port STM-1 SET S2LPORT: BT=S2L, BN=0, FT=SDH, MODE=HUAWEI, TYPE=E1, MODE2=HUAWEI; SET S2LFRM: BT=S2L, BN=0, PN=PORT0, SRTCN=0, ENDCN=62, FRAME=CEPT_BASIC_MODE; SET SDHFLAG: BT=S2L, BN=1, PN=1, S1=0, C2=0, J0="MGW SDH DEFAULT", J1="MGW SDH DEFAULT", K1=0, K2=0, CN=0, RxC2=2, TxC2=2, J0FORMAT=CRC, RxJ0="HuaWei SBS ", TxJ0="HuaWei SBS ", J1FORMAT=CRC, RxJ1="HuaWei SBS ", TxJ1="HuaWei SBS "; //Ty chn c xut hay khng xut cnh bo lin quan n port STM-1 SET OPTALM: BT=S2L, BN=0, PN=0, ALM=RSTIM, SW=ENABLE;21



UMG8900

SET OPTALM: BT=S2L, BN=0, PN=0, ALM=HPTIM, SW=ENABLE; SET OPTALM: BT=S2L, BN=0, PN=0, ALM=LPTIM, SW=ENABLE; SET OPTALM: BT=S2L, BN=0, PN=0, ALM=HPSD, SW=ENABLE; SET OPTALM: BT=S2L, BN=0, PN=1, ALM=RSTIM, SW=ENABLE; SET OPTALM: BT=S2L, BN=0, PN=1, ALM=HPTIM, SW=ENABLE; SET OPTALM: BT=S2L, BN=0, PN=1, ALM=LPTIM, SW=ENABLE; SET OPTALM: BT=S2L, BN=0, PN=1, ALM=HPSD, SW=ENABLE; // Thit lp ch IP Loadshare cho board MPU SET IPWORKMODE: BT=MPU, BN=1, WM=LOADSHARE; // Cu hnh li thng s interface IP ca giao din GE MOD IPIF: IFT=GE, BT=HRB, BN=1, IFN=0, MTU=1500, ENABLE=YES, DESP="GE interface", AUTONEGO=NO, DOMAIN=0, BEARBW=512000, IFCLOSE=NO, SPACEREG=0, INTERVALTIME=65535, RTPMUX=NONE; MOD IPIF: IFT=GE, BT=HRB, BN=1, IFN=1, MTU=1500, ENABLE=YES, DESP="GE Interface", AUTONEGO=NO, DOMAIN=0, BEARBW=512000, IFCLOSE=NO, SPACEREG=0, INTERVALTIME=65535, RTPMUX=NONE; MOD IPIF: IFT=GE, BT=HRB, BN=0, IFN=0, MTU=1500, ENABLE=YES, DESP="GE interface", AUTONEGO=NO, DOMAIN=0, BEARBW=512000, IFCLOSE=NO, SPACEREG=0, INTERVALTIME=65535, RTPMUX=NONE; MOD IPIF: IFT=GE, BT=HRB, BN=0, IFN=1, MTU=1500, ENABLE=YES, DESP="GE Interface", AUTONEGO=NO, DOMAIN=0, BEARBW=512000, IFCLOSE=NO, SPACEREG=0, INTERVALTIME=65535, RTPMUX=NONE; //Cu hnh a ch IP cho board HRB, MPU, OMU ADD IPADDR: BT=HRB, BN=0, IFT=GE, IFN=1, IPADDR="10.19.4.5", MASK="255.255.255.252"; ADD IPADDR: BT=MPU, BN=1, IFT=ETH, IFN=0, IPADDR="10.19.0.1", MASK="255.255.255.248", SN=7; ADD IPADDR: BT=MPU, BN=1, IFT=ETH, IFN=0, IPADDR="10.19.0.9", MASK="255.255.255.248", SN=8; ADD IPADDR: BT=HRB, BN=0, IFT=GE, IFN=0, IPADDR="10.19.4.1", MASK="255.255.255.252"; ADD IPADDR: BT=HRB, BN=1, IFT=GE, IFN=0, IPADDR="10.19.4.9", MASK="255.255.255.252";22



UMG8900

ADD IPADDR: BT=HRB, BN=1, IFT=GE, IFN=1, IPADDR="10.19.4.13", MASK="255.255.255.252"; ADD IPADDR: BT=OMU, BN=0, IFT=ETH, IFN=0, IPADDR="10.19.8.4", MASK="255.255.255.128"; // Add route cho board MPU, OMU y v gateway ADD ROUTE: BT=MPU, BN=1, DSTIP="0.0.0.0", DSTMASK="0.0.0.0", RTTYPE=NEXTHOP, NEXTHOP="10.19.0.6", SN=7; ADD ROUTE: BT=OMU, BN=0, DSTIP="0.0.0.0", DSTMASK="0.0.0.0", RTTYPE=NEXTHOP, NEXTHOP="10.19.8.1"; ADD ROUTE: BT=MPU, BN=1, DSTIP="0.0.0.0", DSTMASK="0.0.0.0", RTTYPE=NEXTHOP, NEXTHOP="10.19.0.14", SN=8; ADD ROUTE: BT=OMU, BN=0, DSTIP="192.168.122.0", DSTMASK="255.255.255.0", RTTYPE=NEXTHOP, NEXTHOP="10.19.8.10"; ADD TRADDR: BT=MPU, BN=1, IFN=0, TRADDR="10.19.0.6", SN=7; ADD TRADDR: BT=MPU, BN=1, IFN=0, TRADDR="10.19.0.14", SN=8; // Add gateway cho board HRB ADD GWADDR: BN=1, IPADDR="10.19.4.9", GWIP="10.19.4.10", TIMEOUT=NoAging; ADD GWADDR: BN=0, IPADDR="10.19.4.1", GWIP="10.19.4.2", TIMEOUT=NoAging; ADD GWADDR: BN=1, IPADDR="10.19.4.13", GWIP="10.19.4.14", TIMEOUT=NoAging; //Thit lp FTP Server SET FTPSRV: SRVSTAT=ON, TIMEOUT=30; ADD FTPUSR: USRNAME="admin", PWD="BOJKWRTZOVMDPQHZ", CFM="BOJKWRTZOVMDPQHZ", HOMEDIR="c:/bam", RIGHT=FULL, ENCR=YES; ADD FTPUSR: USRNAME="bam", PWD="bam", CFM="bam", HOMEDIR="c:/", RIGHT=FULL, ENCR=YES; //Thit lp NTP Server l M2000: 10.18.16.102 ADD NTPSRV: IPADDR="10.18.16.102", AUTH=NO; //Thit lp 2 Virtual Media Gateway: VMGW 0: kt ni vi MSOFT HNI; VMW 1: kt ni vi MSOFT HCM SET VMGW: VMGWID=0, MIDTYPE=IP, MID="10.18.8.1:3100", RPTIMES=3, RPINTV=3, RLSINTV=30, LNKFAILLEN=30, IPNUM=86016, TDMNUM=400384, ATMNUM=221184, AUTOSWP=YES, LNKHBTIME=3,23



UMG8900

LNKMAXHBLOSS=30, MWDMODE=STATIC, MWDVAL=0, CISTT=1000, NETTYPE=WCDMA, ROOTLENGTH=8, NONROOTLENGTH=8, CODEC=G.711A, MASTERMGCDETECTFLAG=NO, MASTERMGCDETECTTIME=5; SET VMGW: VMGWID=1, MIDTYPE=IP, MID="10.26.8.1:3120", RPTIMES=3, RPINTV=3, RLSINTV=30, LNKFAILLEN=30, IPNUM=86016, TDMNUM=400384, ATMNUM=221184, AUTOSWP=YES, LNKHBTIME=3, LNKMAXHBLOSS=30, MWDMODE=STATIC, MWDVAL=0, CISTT=1000, NETTYPE=WCDMA, ROOTLENGTH=8, NONROOTLENGTH=8, CODEC=G.711A, MASTERMGCDETECTFLAG=NO, MASTERMGCDETECTTIME=5; // Cu hnh 2 MSOFT: Msoft HNI 10.18.8.1: 3100 v Msoft HCM 10.26.8.1: 3120 ADD MGC: VMGWID=0, MGCIDX=0, MIDTYPE=IP, MID="10.18.8.1:3100", MSS=MASTER, H248VER=V1, PRONEGO=NO, CONTCTRLASSN=NO, DWRAP=NO, ANNEXC=1, OUTADA=1, PERMANENTREQID=0, STREAMMODE=Inactive; ADD MGC: VMGWID=1, MGCIDX=0, MIDTYPE=IP, MID="10.26.8.1:3120", MSS=MASTER, H248VER=V1, PRONEGO=NO, CONTCTRLASSN=NO, DWRAP=NO, ANNEXC=1, OUTADA=1, PERMANENTREQID=0, STREAMMODE=Inactive; // Cu hnh 8 Link H.248 kt ni gia MGW v MSOFT, 4 Link vi MSOFT HNI( 2 Link trn MPU Slot 7, 2 Link trn MPU Slot 8); 4 Link vi MSOFT HCM( 2 Link trn MPU Slot 7, 2 Link trn MPU Slot 8) m bo nu 1 trong 2 interface trn MPU b down th 8 Link vn active bnh thng. ADD H248LNK: LINKID=0, VMGWID=0, MGCIDX=0, TT=SCTP, PTHMODE=TWOPATH, LOCALIP="10.19.0.1", LOCALPORT=3100, PEERIP="10.18.8.1", PEERPORT=3100, SLIP="10.19.0.9", SRIP="10.18.8.5", LINKNAME="MSSHNI1-MGWDNG1_0", FN=1, SN=7, BP=FRONT, SBN=SBN1; ADD H248LNK: LINKID=1, VMGWID=0, MGCIDX=0, TT=SCTP, PTHMODE=TWOPATH, LOCALIP="10.19.0.1", LOCALPORT=3101, PEERIP="10.18.8.1", PEERPORT=3101, SLIP="10.19.0.9", SRIP="10.18.8.5", LINKNAME="MSSHNI1-MGWDNG1_1", FN=1, SN=7, BP=FRONT, SBN=SBN1; ADD H248LNK: LINKID=2, VMGWID=0, MGCIDX=0, TT=SCTP, PTHMODE=TWOPATH, LOCALIP="10.19.0.9", LOCALPORT=3102, PEERIP="10.18.8.5", PEERPORT=3102, SLIP="10.19.0.1", SRIP="10.18.8.1",24



UMG8900

LINKNAME="MSSHNI1-MGWDNG1_2", FN=1, SN=8, BP=FRONT, SBN=SBN1; ADD H248LNK: LINKID=3, VMGWID=0, MGCIDX=0, TT=SCTP, PTHMODE=TWOPATH, LOCALIP="10.19.0.9", LOCALPORT=3103, PEERIP="10.18.8.5", PEERPORT=3103, SLIP="10.19.0.1", SRIP="10.18.8.1", LINKNAME="MSSHNI1-MGWDNG1_3", FN=1, SN=8, BP=FRONT, SBN=SBN1; ADD H248LNK: LINKID=4, VMGWID=1, MGCIDX=0, TT=SCTP, PTHMODE=TWOPATH, LOCALIP="10.19.0.1", LOCALPORT=3120, PEERIP="10.26.8.1", PEERPORT=3120, SLIP="10.19.0.9", SRIP="10.26.8.5", LINKNAME="MSSHCM1-MGWDNG1_0", FN=1, SN=7, BP=FRONT, SBN=SBN1; ADD H248LNK: LINKID=5, VMGWID=1, MGCIDX=0, TT=SCTP, PTHMODE=TWOPATH, LOCALIP="10.19.0.1", LOCALPORT=3121, PEERIP="10.26.8.1", PEERPORT=3121, SLIP="10.19.0.9", SRIP="10.26.8.5", LINKNAME="MSSHCM1-MGWDNG1_1", FN=1, SN=7, BP=FRONT, SBN=SBN1; ADD H248LNK: LINKID=6, VMGWID=1, MGCIDX=0, TT=SCTP, PTHMODE=TWOPATH, LOCALIP="10.19.0.9", LOCALPORT=3122, PEERIP="10.26.8.5", PEERPORT=3122, SLIP="10.19.0.1", SRIP="10.26.8.1", LINKNAME="MSSHCM1-MGWDNG1_2", FN=1, SN=8, BP=FRONT, SBN=SBN1; ADD H248LNK: LINKID=7, VMGWID=1, MGCIDX=0, TT=SCTP, PTHMODE=TWOPATH, LOCALIP="10.19.0.9", LOCALPORT=3123, PEERIP="10.26.8.5", PEERPORT=3123, SLIP="10.19.0.1", SRIP="10.26.8.1", LINKNAME="MSSHCM1-MGWDNG1_3", FN=1, SN=8, BP=FRONT, SBN=SBN1; // Cu hnh TID cho board giao din TDM(E32, S2L), trn MSOFT s cu hnh dy TID ny tng ng vi dy CIC. ADD TDMIU: BT=E32, BN=0, TIDFV=0, TIDLV=1023, VMGWID=0, RT=EXTERN; ADD TDMIU: BT=E32, BN=1, TIDFV=1024, TIDLV=2047, VMGWID=0, RT=EXTERN; ADD TDMIU: BT=S2L, BN=0, TIDFV=20480, TIDLV=21503, VMGWID=0, RT=EXTERN; ADD TDMIU: BT=S2L, BN=0, TIDFV=21504, TIDLV=22527, VMGWID=0, RT=EXTERN; ADD TDMIU: BT=S2L, BN=0, TIDFV=22528, TIDLV=23551, VMGWID=0, RT=EXTERN;25



UMG8900

ADD TDMIU: BT=S2L, BN=0, TIDFV=23552, TIDLV=24543, VMGWID=0, RT=EXTERN; ADD TDMIU: BT=S2L, BN=1, TIDFV=24576, TIDLV=25599, VMGWID=0, RT=EXTERN; ADD TDMIU: BT=S2L, BN=1, TIDFV=25600, TIDLV=26623, VMGWID=0, RT=EXTERN; ADD TDMIU: BT=S2L, BN=1, TIDFV=26624, TIDLV=27647, VMGWID=0, RT=EXTERN; ADD TDMIU: BT=S2L, BN=1, TIDFV=27648, TIDLV=28639, VMGWID=0, RT=EXTERN; //Thit lp ngun ng b 2Mhz MOD CLKSRC: BRDTYPE=CLK, GPSPRI=SECOND, LINE1PRI=THIRD, LINE2PRI=FOURTH, EXT1PRI=FIRST, GPSTYPE=GPS, SRCTYPE=EXT2MHz, FSSM=FORCE, EXTSSM=UNKNOWN, SLOT=SA4; MOD CLK: BRDTYPE=CLK, MODE=AUTO, GRADE=THREE, TYPE=EXT2MHZ, CTRL=NO, CLKMODE=SOURCE; Thng tin a ch IP.Inde x Boar d type IP Address 10.19.8. 4 10.19.4. 1 10.19.4. 5 10.19.4. 9 10.19.4. 13 10.19.0. 1 10.19.0. 9 Boar d No 0 0 0 1 1 1 1 Interfa ce No Interfa ce Type Used for O&M 0 ETH CS 0 GE CS 1 GE CS 0 GE CS 1 GE 0 ETH 0 ETH Signalin g Signalin g Mask 255.255.255.1 28 255.255.255.2 52 255.255.255.2 52 255.255.255.2 52 255.255.255.2 52 255.255.255.2 48 255.255.255.2 48 Gatewa y 10.19.8. 1 10.19.4. 2 10.19.4. 6 10.19.4. 10 10.19.4. 14 10.19.0. 6 10.19.0. 14

1 OMU 2 HRB 3 HRB 4 HRB 5 HRB 6 MPU 7 MPU

26



UMG8900

VN HNH, BO DNG THIT B Kim tra mi trng lm vic ca thit b Kim tra cnh bo (cnh bo ngun, khi , nhit,): m bo khng c cnh bo no bi thit b hay chng trnh gim st cnh bo Nhit mi trng bnh thng: t 15 n 30 (gii hn n 45 C) m khng kh: t 40% n 65%( gii hn n 85 %) Thit b v mi trng sch s, khng c bi. Kim tra trng thi hot ng ca thit b. Ngoi gim st cnh bo trn chng trnh Alarm, c th theo di tnh trng cc board hoc interface trc quan qua Panel: Device Panel/Device Management/Shelf:0(Frame:0, Frame:1), nu n ch th ca cc board c mu xanh th board ang hot ng bnh thng, nu n ch th mu hoc vng th board hoc interface c li, nu c mu tro th cha dng hoc cha cu hnh. Kim tra dung lng CPU: vo ca s Maintenance/Monitor/CPU Usage chn loi board cn monitor sau Add task ri gim st CPU usage. Kim tra ti nguyn IP, TDM, TC, EC: vo ca s Maintenance/Monitor/ chn loi ti nguyn cn monitor sau theo di. Kim tra ng b: vo ca s lnh thc hin lnh DSP CLK: BRDTYPE=CLK, SN=0; Xem kt qu trng external source status trng thi Normal th ngun ng b bnh thng. External source status ---------------------external source status = Normal external source priority = The first level external source SSM level = UNKNOWN external source type = 2MHz force SSM status = Force SSM Gim st Link H248: Link H248 dng truyn cc bn tin trao i gia MSOFT v UMG, phc v cho vic cp ti nguyn thit lp cuc gi. Hin ti ang cu hnh 8 Link n 2 MSOFT, 4 Link n MSOFT HNI, 4 Link n MSOFT HCM. Thc hin lnh DSP H248LNK; kim tra Link state ca cc Link. Nu trng thi Link state l up th cc Link bnh 27



UMG8900

thng, nu trng thi l down th cc link ang li. Thc hin kim tra tng bc: Kim tra kt ni IP t MPU n MSOFT. Thc hin lnh Ping kim tra kt ni n a ch MSOFT HNI: 10.18.8.1, 10.18.8.5; MSOFT HCM: 10.26.8.1, 10.26.8.5. Nu kt ni IP khng thng th kim tra ng truyn t MPU Gateway(IP Core) MSOFT.

Hnh 9: Ping command. Phi hp vi MSC3G HNI, MSC3G HCM kim tra cu hnh.

Gim st cnh bo v x l mt s li thng gp Thng xuyn gim st cnh bo trn h thng qua ca s Alarm trn LMT UMG8900 hoc Alarm trn M2000 3G. ng vi mi cnh bo s c Solution i km, thc hin kim tra tng bc tm nguyn nhn cnh bo. Mt s cnh bo c th gp: IP Interface failure: xem cnh bo xc nh frame no, port no thuc slot no, loi interface l ETH hay GE, a ch IP. Kim tra li im kt ni IP u xa(Board ODF Switch IP Core), cm li u cp mng hay cp quang(GE). SDH/STM-1 fault: cnh bo h port quang STM-1, phi hp vi truyn dn kim tra port. Thc hin lnh DSP TDMSTAT; kim tra trng thi ca cc lung trn port. Thng s u ni vi port ca truyn dn nh sau: Board Slot Port Transmission Port S2L 2 0 OSN 7500-2/4-5 S2L 2 1 OSN 7500-2/5-5 S2L 3 0 OSN 7500-1/14-5 S2L 3 1 OSN 7500-1/15-5 E1/T1 channel fault: xem thng tin cnh bo xc nh lung E1 b h lung, phi hp truyn dn kim tra; nu cn th loop lung ti gi DDF kim tra tng chn.28



UMG8900

SDH/STM-1 path fault: xem thng tin cnh bo xc nh lung cnh

bo, kim tra li thng tin cu hnh ca port STM1. Xem Alm reason trn alarm xc nh nguyn nhn chi tit, thc hin cc bc kim tra theo Solution. Backup v Restore h thng(thao tc Backup v Restore do nhm CN thc hin). Backup: c th backup ton b th mc bam trn C ca board OMB hoc nhng file quan trng sau y:

bam\mml.txt bam\ini\user.ini bam\ini\command.usr bam\ini\pftskdt.ini bam\ini\obj_tpl.ini bam\ini\itm_tpl.ini bam\ini\time_tpl.ini bam\ini\tsk_tpl.ini bam\ini\customitm.ini bam\ini\rtsttskdt.ini bam\alm\almchang.cfg bam\alm\almchang_e.cfg bam\alm\almmask.ini bam\config\data.cfg bam\license\license.ini bam\bin\tonepatch

Cch thc hin: c th thc hin backup thng qua FTP SERVER hoc chng trnh LMT. FTP SERVER: thc hin lnh DSP FTPSRV; trn LMT kim tra trng thi ca FTP Server, nu ang OFF th thc hin lnh SET FTPSRV; thit lp trng thi FTP sang ON. SET FTPSRV:SRVSTAT=ON; To user trn FTP Server nu cha c, th mc lm vic l C:/bam ADD FTPUSR: USRNAME="bam", PWD="bam", CFM="bam", HOMEDIR="c:/bam", RIGHT=FULL;

Vo chng trnh FTP Client nm trong th mc ci t chng trnh LMT D:\HW LMT\client\ftpclient\bin\FTPclient.exe vi user name v pass cu hnh trn, thc hin backup cu hnh. LMT: vo menu Backup/Backup Configuration Data Immediately, kch chn Local thng tin backup s c lu trong th mc ci t D:\HWLMT\adaptor\clientadaptor\UMG8900\UMG8900V200R008C03SPC100\output\ConfigurationData

29



UMG8900

Hnh 10: Backup configuration

Restore: thc hin Restore cu hnh vi thng tin c backup trong th mc D:\HWLMT\adaptor\clientadaptor\UMG8900\UMG8900V200R008C03SP C100\output\ConfigurationData hoc cu hnh c backup qua FTP Server. Vo menu Backup > Restore Configuration Data:

Hnh 11: Backup configuration Kch chn Local vi ng dn D:\HWLMT\adaptor\clientadaptor\UMG8900\UMG8900V200R008C03SP 30



UMG8900

C100\output\ConfigurationData, nhp user v pass ca FTP Server cu hnh trn OMB:

Hnh 12: Restore configuration t Local PC.

Kch chn OK upload thng tin ln OMB. Thc hin lnh RST SYS; reset li h thng, hon tt qu trnh Restore. Nu chn Restore qua FTP Server th phi thit lp 1 FTP Server cha cu hnh backup(c th dng software wftpd32.exe). Sau nhp thngtin nh bn di:

31



UMG8900

Hnh 13: Restore configuration t FTP Server

Sau khi upload cu hnh cng thc hin lnh RST SYS; reset li h thng.

Ngi bin son Trn Quang Tn

Ngi xem xt

Ngi ph duyt

32

Documents

Qui trinh van hanh UMG8900