8/9/2019 SB 51-1

1/2

Vertical form-, ll- and seal-machine in utilized modular constructionfor stick portion bags (Stick-packs), vertical construction. This machinewas specially designed to produce small sized sample bags andportion bags at high operating speeds and with appropriate additionalattachments. It is suited for the packaging of:

Powdered products1. (even with heavy dust development) suchas coffee shortener, instant coffee, ground spices, medicalpowders, milk powder and instant soups, cappuccino.Granular products2. such as sugar, salt, unground spices, medicalgranules, silicious gel.Small piece goods3. such as ear stoppers, sweets, saccharin,

tablets, grains.Liquids, cremes, pastes4. such as alcohol, coffe-syrup, sugarmilk,chocolate drink, dressing sauces, mustard, mayonnaise, ketchup,gel, soft cheese, butter.

The machine is equipped to handle all current heatsealable wrappingmaterials and special foils.

Technical Data

Min. bag size : approx. 10 mm width,20 mm length

Max. bag size : approx. 50 mm width,

200 mm lengthFilling volume : max. = approx. 75 cm3 Output : up to 120 bags/min.Power : 400V/3/N/PE/50 Hz;

approx. 2 kWCompressed air connection : 6 bar; approx. 50 NL/minWeight : approx. 300 kg

(depending on design) Dimensions : see back or layout drawing

of the corresponding design.

Operating Principle

From the wrapping material reel the machine forms the bag,lls it by means of the corresponding dosing unit, and cuts it off.

Photocell unit centers the bag length for the print.

Feeding and Dosing Systems

Different types of feeding and dosing systems which can be easilychanged are available. Please inquire about these accessories.All parts from our modular systems are compatible for latermodication.

PACKAGING

MACHINE SB 51-1

MACHINE DESIGN & ELECTRO - MECHANICAL ENGINEERINGJl. Kemayoran Baru No. 31-33 Surabaya 60175, Indonesiaphone +6231 3538438 - 3536853 - 3521811 fax +6231 3532797email packaging@nastecgmi.com | www.nastecgmi.com

8/9/2019 SB 51-1

2/2

Technical Features

Innitely variable electromechanical drive, silent running,

economical in use of energy, and easy to mantain.Further advantages are:

Uniform low overall height of forming shoulders1.for all types wrapping materials (if necessaryon air cushions basis, protected designDBGM no.7608.036).

Wear free lm draw-off by cross sealing jaws.2.

Separate or direct drive for dosing units.3.

Equipment Variants and Additional Equipment

Longitudinal sealing variants - overlapping seal/reverseoverlapp eal, variable cutting series, gas absorption, specialvoltage, stored program control, suction transfer systems,printing devices, check weighers bag banderoling, bagcounting and collecting device, cartoning fully- or semiautomatic, product supply systems.

Drawing of Working Principle

Dimensions (in mm, not binding)

Filling tube

Forming shoulder

Vertical jaw

Horizontal jaws/  cut-off knife/

draw-off