Upload
roman-raluk-andreea
View
232
Download
0
Embed Size (px)
Citation preview
7/31/2019 Setup Guide En
1/40
MB-190 Message Board
Setup Guide
7/31/2019 Setup Guide En
2/40
7/31/2019 Setup Guide En
3/40
Contents
Step 1: Installing the Message Board Expansion kit ............................. 1Packing contents ................................................................................................. 1
Installing the Message Board expansion kit ........................................................ 1
Step 2: Connecting the cables ................................................................ 6Connecting the LAN cable................................................................................... 6
Connecting the power cord ................................................................................. 7
Step 3: Turning the power on ................................................................... 8
Step 4: Confguring or TCP/IPsettings ................................................... 9Assigning an IP address to the machine ............................................................. 9
Protecting the network settings ......................................................................... 12Veriying the IP settings ..................................................................................... 13
Browser-based setup ........................................................................................ 14
Step 5: Veriying the network settings ......................................................15Printing the Network settings .......................................................................... 15
Step 6: Installing the Message Board drivers and utilities ................. 16System requirements ........................................................................................ 17
Installing the Message Board drivers and utilities ............................................. 18
Deleting Message Board drivers and utilities .................................................... 25
Step 7: Setting up the e-mail server ..................................................... 26SMTP/POP server settings ............................................................................... 26
E-mail Settings .................................................................................................. 29
Index ........................................................................................................ 35
7/31/2019 Setup Guide En
4/40
7/31/2019 Setup Guide En
5/40
Step 1: Installing the Message BoardExpansion kit
Hardware installation should be perormed by a qualifed service technician.
Packing contents
The ollowing items are included in the Message Board expansion kit.
(1) Message Board PCB (with a CF card)
(2) Subsidiary power supply unit
(3) Installation Disk, contains Message Board programs and manuals.
(4) One clamp and our Message Board mounting screws
(5) Two errite cores
(6) Sot key label
Installing the Message Board expansion kit
1 Turn the power o and unplug the power cord.
7/31/2019 Setup Guide En
6/40
2 Remove the covers.(1) Remove the connect cover.(2) Unplug the harness that is going through the connect cover.(3) Remove the two screws and the option cover.(4) Remove the fve screws and the shield cover.
Connect cover
Shield cover
Option cover
3 Remove the let cover.(1) Remove one screw that is securing the let cover.(2) Remove the let cover by releasing the two tabs on the upper side.
7/31/2019 Setup Guide En
7/40
7/31/2019 Setup Guide En
8/40
7 Reattach the covers.(1) Attach the shield cover using fve screws.(2) Plug in the harness and attach the connect cover.
Connect cover
Shield cover
8 Use the nippers to careully punch out the panel on the option cover.
9 Reattach the option cover using two screws.
Option cover
7/31/2019 Setup Guide En
9/40
10Attach the Address Entry label to the position as shown on the illustrationbelow. (The Address Entry label is on the Sot Key label sheet suppliedwith your Message Board.)
IMPORTANT
You should attach the Address Entry label over the combine key as
the Combine key on the control panel will be changed automatically to
the ax and e-mail entry mode ater installing the Message Board.
AddressEntry
AddressEntry
7/31/2019 Setup Guide En
10/40
Step 2: Connecting the cables
Connecting the LAN cable
Connect your machine to a network using standard LAN cables.
NOTE
Use Category 5 cable with an RJ-45 connector or the standard network
port.
To attach the machine to a network:
1 Make sure the machine is turned o and unplugged.
2 Loop the LAN cable and attach the errite core as shown.The LAN cable loop should be about 5.1 cm (2 inches) rom the end.
3 Plug one end o the standard LAN cable into a LAN drop or hub andthe other end into the Ethernet port on the let-side o the machine. Themachine will automatically adjust to compensate or the network speed.
LINE
PHONE1
PHONE2
7/31/2019 Setup Guide En
11/40
Connecting the power cord
1 Plug the non-pronged end o the machine power cord into the socket onthe let-side o the machine.
LINE
PHONE1
PHONE2
2 Plug the pronged end into a properly grounded AC outlet.
NOTE
The appearance o the plug and outlet diers according to the coun-
tries.
7/31/2019 Setup Guide En
12/40
Step 3: Turning the power on
1 Plug in the power cord.
2 Turn the power on.
The markings are international standards: [ | ] means on, [ ] means o.
NOTE
I a DHCP (Dynamic Host Confguration Protocol) server is not installed
on your network, the message will read DHCP server did not respond.
In this case, you will need to turn o the DHCP server setting and enterthe machine IP address manually as described on I your network is
not using DHCP, see page 10.
NOTE
In some cases the ollowing display may appear.I this message appears,
(1) Enter the current time settings using the numeric keys.(2) Press .
TimeYearMonth
Enter Time01/01 '08 00:00
Day
7/31/2019 Setup Guide En
13/40
Step 4: Confguring or TCP/IPsettings
An IP address is required to install the network driver and use your machine
as a network printer and network scanner. You need to obtain the IP addressrom your network administrator and register it as shown below.
Assigning an IP address to the machine
I your network is using DHCP (Dynamic Host Confguration Protocol)I a DHCP (Dynamic Host Confguration Protocol) server is installed on yournetwork, the machine will automatically be assigned an IP address and SubnetMask the frst time the machine is turned on. According to the DHCP serversetting, a Gateway address and DNS server address may be assigned as well.
1 To see the assigned IP address or your machine, print the Network set-tings list. To print the Network settings list, press , , ,, , on the machine control panel.
2 Go to Veriying the IP settings on page 13.
IMPORTANT
Once the DHCP server has assigned the IP address to your machine,
that IP address MUST be reserved within the specifc DHCP scope.
Failure to do so could result in ailed operation when the IP address
lease expires.
Ater an IP address is assigned to your machine, turn the DHCP Set-ting o. (For the instruction, see step 1 and 2 on the next page.)
NOTE
You can view the assigned addresses on the TCP/IP setting menu
display.
The IP address and Subnet Mask assigned rom the DHCP server
cannot be modifed.
A Gateway Address and DNS server address will not be assigned i
the primary and secondary addresses have already been registered.
I you are not using the DHCP server, turn the DHCP setting o andmanually assign the IP address and Subnet Mask.
7/31/2019 Setup Guide En
14/40
0
I your network is not using DHCPI your network is not using DHCP, you need to turn o the DHCP serversetting. Then enter the IP address manually to install your machine on yournetwork.
1 Press , , , .
[Program] No.611
1 TCP/IP Settings
NOTE
I the network setting passcode has been set (see Protect the network
settings on page 12), you must enter the proper our-digit passcode
using the numeric keys and press .
Network SettingsEnter Passcode :0000
2 Press .
DHCP Setting :Off //Enter
3 Select O using or
and press . (When the LCD hasalready been displaying O, just press .)
4 Enter the new IP address using the numeric key.To move the cursor press or . To delete a number, press .
IP Address192.168. 1. 10
5 Press .
Subnet Mask255.255.255. 0
6 Use the numeric key to enter the appropriate address o the Subnet Mask,and .
7 Use the numeric key to enter the appropriate address o the primary gate-way (Gateway 1 on the LCD), and .
8 Use the numeric key to enter the appropriate address o the secondary
gateway (Gateway 2 on the LCD), and .9 Use the numeric key to enter the appropriate address o the primary DNS
server (DNS Server 1 on the LCD), and .
10Use the numeric key to enter the appropriate address o the secondaryDNS server (DNS Server 2 on the LCD), and .
11When you are fnished, press to stop the operation.
To Implement Change,You must shutdown.
7/31/2019 Setup Guide En
15/40
12To activate the network settings, shutdown the machine.
To shutdown the machine:
(1) Press , , then .The ollowing two displays will appear alternately.
MB ShutDown?
Yes
Enter
MB ShutDown?
No
Cancel
(2) Press to shutdown.
IMPORTANT
Ater all these steps rom 1 to 11 are completed, you need to shut-
down the machine as in step 12 in order to activate the network set-
tings.
Whenever you turn the power o, the same shutdown procedure is
necessary. Do not just turn the switch o.
13When the ollowing message appears, turn the machine o and ater a ewmoments turn the machine back on.
Please Power Off/On
14Go to Veriying the IP settings on page 13.
NOTE
Ater you have set the IP address, you can confgure the network set-
tings using a web browser. (See Browser-based setup on page 14.)
7/31/2019 Setup Guide En
16/40
Protecting the network settings
When this passcode has been set, the machine will require the entry o apasscode prior to viewing/editing the network settings.
1 Press , , , .
[Program] No.612
2 Network Passcode
2 Press .
Read/Write Code //Enter
3 Change the passcode by entering the new our-digit passcode using thenumeric keys.I you want to disable the passcode protection enter 0000.
Read/Write Code
New Passcode :0000
The Read/Write passcode allows you to view and edit network settings.
4 Press .
Read Only Code //Enter
5 Change the passcode by entering the new our-digit passcode using thenumeric keys.I you want to disable the passcode protection, enter 0000.
Read Only CodeNew Passcode :0000
The Read Only passcode allows you to view the network settings only.
NOTE
The Read Only Code cannot be set unless the Read/Write Code has
been entered.
6 Press .
7 Press to stop the operation and return to standby.
Ater you have set the network passcode, the machine will prompt you to enterthe passcode whenever you try to access the network settings.
7/31/2019 Setup Guide En
17/40
Veriying the IP settings
You can ping the IP address and veriy that it responds.
1 On the Network settings list on page 15, you can see the IP address othe machine.
2 Access the command prompt on a network computer.
3 Type ping ollowed by the IP address o the machine.I the machine is active on the network, you will receive a reply.(The ollowing is sample window.)
7/31/2019 Setup Guide En
18/40
Browser-based setup
Using your browser you can access the Message Board web page whichallows you access to several machine unctions and settings.
I you are an administrator, you can also confgure the network settings suchas TCP/IP settings, e-mail settings, and so on.
To confgure the network settings, use the tools underneath the Confguration
heading o the Admin Tolls tab.
NOTE
For more inormation on the Admin tools, reer to the Using the Admin
Tools described on the chapter 3 o the Message Board PC Users
Guide.
To access the Message Board web page:Enter the machines IP address in the URL address feld o your browser(or example, http://192.168.1.10/).
I you do not know the IP address o your machine, you can fnd it on the Net-work Setting list. Print the Network Settings list and view the IP Addresslocated underneath the Network Settings heading. To print the network set-tings list, press , , , , , .
7/31/2019 Setup Guide En
19/40
Step 5: Veriying the network settings
Print the Network Settings to veriy the network settings. The Network Set-tings lists TCP/IP Settings and Mail Environment.
NOTE
Be sure to save the network settings list ater you print it. You may need to
access it as another time.
Printing the Network settings
1 Press , , , , .
[Program] No.512222 Network Settings
2 Press .The Network Settings will be printed.
7/31/2019 Setup Guide En
20/40
Step 6: Installing the Message Boarddrivers and utilities
Ater you have confgured the machine or TCP/IP setup, you are ready to
install the Message Board drivers and utilities.To take ull advantage o the eatures o Message Board, install the MessageBoard drivers and utilities contained in the Installation Disk CD that shippedwith the Message Board expansion kit.
Message Board InoMonitor
This utility alerts users when new documents arrive.
It can also be confgured to send alerts or not only new documents but alsothe result status o sending and printing.
For more on how to use Message Board InoMonitor, see InoMonitor on thechapter 4 o the Message Board PC Users Guide.
Message Board Document Download Manager
This utility automatically downloads received documents. You can speciy thetype o document, where to download it, at what time to download it and theappropriate fle ormat.
For more on how to use Message Board Document Download Manager, seeDocument Download Manager on the chapter 5 o the Message Board PCUsers Guide.
Message Board CoverPage Editor
This utility is used to customize cover pages or ax transmissions.
Recipient inormation (company name, department, personal name, etc.) isautomatically inserted, so you do not need to create cover pages or each user.
For more on how to use Message Board CoverPage Editor, see Using theCoverPage Editor on the chapter 6 o the Message Board PC Users Guide.
GDI Print Driver
This driver is required to use Message Board to print documents created usingapplication sotware.
Fax Driver
This driver is required to use Message Board to directly ax documents createdrom PC applications.
Message Board TWAIN Connector
This driver is used to read images imported using the Message Board scannerutility into a graphical image editing application.
For more on how to use the Message Board TWAIN Connector, see Networkscanning in the chapter 2 o the Message Board PC Users Guide.
Message Board TiMaker
This driver converts documents created in PC applications into TIFF imagefles. Converted image fles can then be sent as fle attachments.
7/31/2019 Setup Guide En
21/40
System requirements
Item Requirements
PC Type IBMs PC-AT compatible machine loaded with one o
the ollowing operating systems.
Operation System Windows Vista Ultimate
Windows Vista Ultimate 64-bit edition Windows Vista Enterprise
Windows Vista Enterprise 64-bit edition
Windows Vista Business Windows Vista Business 64-bit edition
Windows Vista Home Premium
Windows Vista Home Premium 64-bit edition
Windows Vista Home Basic
Windows Vista Home Basic 64-bit edition
Windows Server 2008
Windows Server 2008 64-bit edition
Windows Server 2003 Windows XP Proessional
Windows XP Home Edition Windows 2000 Proessional
Windows NT 4.0 Workstation (SP6a or later)
Windows Me
Windows 98 Second Edition (SE)
Windows 98
* Operation with Windows 98/98SE/Me upgraded rom
Windows 95/3.1 cannot be guaranteed.* Not compatible with command prompt o MS-DOS
and Windows and DOS prompt.* Only the print driver is available or Windows Server
2003.
* Only the pritner and scanner drivers are available or
Windows Server 2008.
CPU and Memory Depends on the operating system
Interace port Ethernet 10 Base-T, 100 Base-TX
Network Protocols HTTP
CD-ROM CD-ROM drive
7/31/2019 Setup Guide En
22/40
Installing the Message Board drivers and utilities
NOTE
Install utilities or drivers on each computer.
Beore installing, scan or viruses and close any running applications.
Failing to do so may interere with proper installation.
Beore installing the driver, confrm that the TCP/IP protocol has beeninstalled on your computer. For Windows NT 4.0, confrm that the TCP/
IP protocol and Microsot TCP/IP printing have been installed. I not,install it according to your Windows manual.
Windows Vista, Windows Server 2008, Windows Server 2003, Windows
XP, Windows 2000 and Windows NT 4.0 require that you have administra-tive access to install drivers and utilities on your computer.
This example uses the 13ppm machine, however the instructions givenwill apply to all models.
1 Insert the supplied CD into your CD-ROM drive. The driver installationwindow will appear automatically. I not, run the setup.exe located on theroot directory o the supplied CD-ROM.
NOTE
For Windows Vista/Server 2008 users:
1. I the AutoPlay dialogue box appears, click [Run Setup.exe].
2. When the User Account Control dialogue box appears, enter an
administrator password or provide confrmation.
2 Choose your language, then click [Next]
7/31/2019 Setup Guide En
23/40
3 Click [Next].
4 Ater careully reading the License Agreement, click [Yes] i you agree.
5 Click [Next].I you want to install the driver into another location, click [Browse] andlocate the preerred fle location.
7/31/2019 Setup Guide En
24/40
0
6 Speciy which program older you want to use when launching programsrom the Start menu.
To speciy another older, enter the older name in Program Folder:.To use a pre-existing program older, select it rom the Existing Folders:list.
Then click [Next].
7 Select your machine, then click [Next].
8 Select the utilities and drivers you want to install.
I you do not want to install a particular driver or utility, simply uncheck thecorresponding checkbox.
9 When you have fnished selecting drivers and/or utilities, click [Next].
7/31/2019 Setup Guide En
25/40
10Click [OK].
11When the Server Search dialogue appears, enter the IP address o yourmachine.
NOTE
Even i you do not know your machines IP address, you can fnd it by
ollowing these steps.
(1) Click [Search].
The setup program will search or the IP address o machines on the
network.
Ater a ew moments, machines (MFP only) on the network will be
displayed.
On Windows Vista, Windows XP Service Pack 2, Windows Server
2008, and Windows Server 2003, the Windows Security Alert dia-
logue will appear when clicking [Search].
In this case, click [Unblock] to continue searching.
(2) Select your machines IP address, then click [OK].
12Ater entering the IP address, click [OK].
13Select which program shortcuts you want to create on your computersdesktop.
7/31/2019 Setup Guide En
26/40
I you do not want to create a particular shortcut, simply uncheck the cor-responding checkbox.
14Click [Next].
15Select which utilities to add to the Startup group.When the utilities are added to the startup group, they will be launchedautomatically when the computer is turned on.
I you do not want to install a particular shortcut, simply uncheck the cor-responding checkbox.
16Click [Next].
7/31/2019 Setup Guide En
27/40
17The settings previously entered will be displayed.
I you would like to change any o these, click [Back] to go back and modiythe previous settings.
18Click [Next].
19When installation is complete, the completion wizard will appear.
7/31/2019 Setup Guide En
28/40
20Select the Yes, I want to restart my computer now. radio button and click[Finish].
NOTE
On Windows Vista, Windows XP Service Pack 2, Windows Server 2008,
and Windows Server 2003, the Windows Security Alert dialogue will
be displayed when utilities such as Message Board InoMonitor initially
start. In this case, click [Unblock].21 I you have installed Message Board InoMonitor and/or Message Board
Document Download Manager, ater restarting your computer the Envi-ronment settings dialogue will appear.
22Click Message Board Settings, and [Search].
23Select the IP address o your machine and click [OK].
NOTE
For inormation on using the drivers and utilities, please reer to the cor-
responded chapter on the Message Board PC Users Guidecontainedin the CD.
7/31/2019 Setup Guide En
29/40
Deleting Message Board drivers and utilities
I you wish to delete Message Board drivers and utilities or any reason, per-orm the ollowing procedures.
NOTE
For Windows Vista/2000/XP/Server 2008/Server 2003/NT4.0, you need to
log on as an administrator to delete the drivers and utilities. By perorming this procedure, all installed Message Board drivers and
utilities will be deleted.
For Windows Vista / Windows Server 2008
1 Click [Start] > [Control Panel] > [Programs].2 Click [Program and Features].3 Select the Message Board and then click [Uninstall]. When the User
Account Control window appears, type an administrator password or pro-vide confrmation.
The Message Board Utility Maintenance program window will appear.
4 Click [Delete]. Then ollow the instructions that appear on the window.
For Windows XP / Windows Server 2003
1 Click [Start] > [Control Panel] > [Add or Remove Programs].2 Click [Change or Remove Programs].3 Select the Message Board and then click [Change/Remove].
The Message Board Utility Maintenance program window will appear.
4 Click [Delete]. Then ollow the instructions that appear on the window.
For Windows 2000 Proessional
1 Click [Start] > [Settings] > [Control Panel] > [Add/Remove Programs].2 Click [Change or Remove Programs].3 Select the Message Board and then click [Change/Remove].
The Message Board Utility Maintenance program window will appear.
4 Click [Delete]. Then ollow the instructions that appear on the window.
For Windows 98 / 98SE / Me / NT4.0
1 Select [Start] > [Settings] > [Control Panel] > [Add/Remove Programs].2 Click the Install/Uninstall tab.3 Select the Message Board and then click [Add/Remove] button.
The Message Board Utility Maintenance program window will appear.
4 Click [Delete]. Then ollow the instructions that appear on the window.
7/31/2019 Setup Guide En
30/40
Step 7: Setting up the e-mail server
In order to use the e-mail and Internet ax unctions on your machine, theSMTP/POP settings and E-mail Settings must be setup. These settings canbe confgured using the Web Browser.
NOTE
Using the Admin Tools on the Message Board web page, you can check
and confgure all the network settings or your machine. For more inorma-
tion on using the Admin Tools, reer to Chapter 3: Using the Admin Tools
on the Message Board PC Users Guide.
SMTP/POP server settings
1 Type your machines IP address in the URL address feld on your webbrowser (or example, http://192.168.1.10/).
I you do not know the IP address o your machine:Print the Network Settings list and view the IP Address located under-neath the Network Settings heading. To print the network settings list,press , , , , , .
2 Click the Admin Tools tab.
3 Click [SMTP/POP] under the Confguration column.The SMTP/POP Settings window will appear.
4Enter the settings or your e-mail server.
7/31/2019 Setup Guide En
31/40
Item Description
Sender
Inorma-
tion
Name Sets the name that is displayed in the sender
feld (From feld) when sending e-mail.
Up to 40 characters can be registered.
E-mail Address Enter the e-mail address that is assigned to
your machine.
Up to 50 characters can be registered.
Server
Sending mail (SMTP)
Server
Enter the domain name or IP address o the
SMTP server used or sending e-mail.
When entering a domain name, you can
register up to 50 characters.
Receiving mail
(POP3) Server
Enter the domain name or IP address o the
POP3 server used or receiving e-mail.
When entering a domain name, you can
register up to 50 characters.NOTE
Even i the STMP server and the POP3server are the same server, set both.
User ID or POP3 Enter the user ID or the POP3 server.
Up to 50 characters can be registered.
Password or POP3 Enter the password or the POP3 server.
Up to 50 characters can be registered.
Check or New Mail Set the interval at which the mail server is
checked or new mail. The minimum value is
5 seconds and the maximum is 99 hr 59 min
59 sec.The deault value is 10 min.
I you want to check or mail manually, set all
o these values to 0. In this case, you can
receive e-mail by the ollowing procedure.
1. Switch to the ax mode by pressing
.
2. Press , then
press
repeatedly until the ollowing
display appears.
3. Press . The machine will querythe POP server.
Receive beore Send For some providers, POP authentication is
required beore sending (send request to
SMTP server). In this case, check this item.
SMTP Port No. Enter the SMTP port number. (065535)Normally, set to 25.
POP3 Port No. Enter the POP port number. (065535)
Normally, set to 110.
7/31/2019 Setup Guide En
32/40
Select POP3 Auth.
Method
APOP (Authenticated POP) is a POP secu-
rity protocol that encrypts the POP password
when connecting with the POP server.I APOP is available on the POP server you
are using, select APOP. Otherwise, select
Standard.
Select SMTP Auth.Method Select the SMTP authentication method ithe SMTP server you are using requires
authentication.
User ID or SMTP Enter the user ID or the SMTP server, i
necessary.
Up to 50 characters can be registered.
Password or SMTP Enter the password or the SMTP server, i
necessary.
Up to 50 characters can be registered.
SMTP
Reception
Domain or Receiv-
ing
When receiving mail with SMTP rom the
mail server, this sets the accepting domainname.
STMP reception is not possible unless this
is set.
It can be entered up to 50 characters.
Receiving Port No. Input the SMTP port number.
Normally, set to 25.
[Security] button You can register up to fve computer IP
addresses or domains or clients allowed
to receive. Click the [Security] button, then
register in the Security dialogue.[Initialize] Initialize the SMTP/POP settings. The settings will return to the ac-
tory deault setting.
[Save] Saves the settings.
[Close] Closes the Process Request Settings dialogue.
5 When you are fnished, click [Save] to save the settings.
7/31/2019 Setup Guide En
33/40
7/31/2019 Setup Guide En
34/40
0
Item Description
Attach File
Format
Specifes whether the document is converted into a PDF,
TIFF-S or TIFF ormat when sending an e-mail.
The document is converted into PDF ormat. However, a
PDF fle can only be transmitted to an e-mail inbox.
TIFF-S (ITU-T T.37 simple mode)The document is converted into a TIFF ormat based on
T.37 simple mode. T.37 is an international standard or
Internet axing. When a document is sent in simple mode
ormat, it can be received normally by other Internet axdevices. However, all attached documents are converted to
A4 size and 200 dpi resolution.
TIFF (ITU-T T.37 ull mode)
The document is converted into a TIFF ormat and is sent
at the original document size and resolution selected during
scanning.
TIFF Image Encoding Method sets the image encodingmethod or sending documents with TIFF. Select MH,
MR, MMR, or JBIG.
NOTE
This setting is eective only or an e-mail sending rom the
PC. For the attached fle ormat o an e-mail sending rom
the machine, you can set it using the machines control
panel.
However, the TIFF Image Encoding Method setting is
eective or both e-mail sending rom PC and e-mail sending
rom machine.Insert Cover-sheet (I-Fax)
or Subject/
Text (E-mail)
Select whether to automatically attach the ollowing presetsubject line and text message, into an e-mail i it is sent
without these items flled in by the user.
Subject: E-mail Message
Text: This is an e-mail message.
Please see the fle attached.
When Insert text is selected, you can also select whether
to add the sender inormation to the text.
The sender inormation can be stored in SMTP/POP Set-
tings dialogue on page 26.
NOTE
This setting is eective only or an e-mail sent rom the PC.
However, The sender inormation setting is eective
or both e-mail sent rom a PC and e-mail sent rom the
machine.
7/31/2019 Setup Guide En
35/40
Template
Up to 10 e-mail templates can be registered or sending.
Registered e-mail templates can be accessed rom the
machine when sending an e-mail.To register or edit an e-mail template:
(1) Click [E-mail Template Registration].
The E-mail Template Registration window will appear.
(2) To register a new template, click a number that does notcontains a template.
To edit a template, click the template name you want to
edit.
The E-mail Template window will appear.
(3) Enter the items, then click [Save].
Show
recipients on
Tx e-mail
Sets whether or not to write the e-mail destination inorma-
tion (To, Cc, Bcc) in the e-mail header.
I e-mail is broadcast in large volumes to multiple addresses,
some SMTP servers may not accept the e-mail transmis-sion. I this happens, select No show one recipient.
7/31/2019 Setup Guide En
36/40
When mailthat cannot beanalyzed isreceived
In some cases, received e-mail cannot be correctly printeddue to the ormat o a received fle. This mode allows youto either return an error message to the sender or have themessage orwarded to another inbox. Return error notice to author
Returns an error notice to the author Return mail to author
Returns the original e-mail to the author. Forward mail to othersForwards the e-mail to another e-mail address withoutreturning it to the author. You can set just one e-mailaddress in which to orward mail that can not be analyzed.The orwarding e-mail address can contain up to 50 char-acters
Requestreceipt verif-cation whensending mail
This sets whether to request the receiver or delivery check(DSN) or reading check (MDN) when sending e-mail.Delivery Status Notifcation (DSN) rom receive serverRequests a delivery confrmation.
Message Disposition Notifcation (MDN) showing thatrecipient read the mailRequests a read receipt.
Request both reception notifcationsRequests both a delivery confrmation and a read receipt.
Do not request either reception notifcationsThe delivery notifcation and read receipt will not berequested.NOTE
Some mail servers and e-mail reception sotware will notrespond to these requests.
When mail
requesting
MDN isreceived
Select whether to return a MDN (Message Disposition Noti-fcation) when e-mail is received or which the sending siderequests an MDN. Do not send MDN
Not reply a MDN. Send MDN
Reply a MDN.[Speciy MDN Recipients]This is set or replying to MDN only or e-mail receivedrom specifc e-mail addresses or domain names.Click the [Speciy MDN Recipients], then register an e-mailaddress or domain name. Up to fve can be registered.
NOTE
I you check Send MDN, but do not set the Speciy MDN
recipients, MDN replies are sent to all e-mail requestingthem.
7/31/2019 Setup Guide En
37/40
When mail
that requests
ax orwardingis received
This sets whether or not to honor requests or orwarding
received e-mail as axes.
Reject orwarding requestDenies orwarding requests
Accept orwarding request
Accept orwarding requests
[Setting Security or Fax Forwarding]
This is set when ax orwarding requests are accepted, but
this is restricted to requests rom specifc e-mail addresses
and domain names. Up to fve can be registered.
Click the [Setting Security or ax orwarding], then register
in the Setting Security or Fax Forwarding dialogue.
NOTE
I you check Accept orwarding requests but do not set
the Security or Fax Forwarding, then all e-mail requesting
ax orwarding is orwarded.
[Initialize] Initialize the e-mail settings. The settings will return to the
actory deault setting.
5 When you are fnished, click [Save] to save the settings.
7/31/2019 Setup Guide En
38/40
Deault setting list
q SMTP/POPSettings
Item Content Deault setting
Name Up to 40 characters (Blank)
E-mail Address Up to 50 characters (Blank)
SMTP Server Domain name or IP address.Up to 50 characters
0.0.0.0
POP3 Server Domain name or IP addressUp to 50 characters
0.0.0.0
User ID or POP3 Up to 50 characters (Blank)
Password or POP3 Up to 50 characters (Blank)
Check or New Mail 0:0:05 99:59:59 0:10:0
(10 minutes)
Receive beore send POP beore SMTP No
SMTP port No. 0 65535 25
POP3 port No. 0 65535 110
POP authentication method Normal / APOP Normal
SMTP authentication method Do not use / LOGIN / PLAIN /CRAM-MD5
Do not use
User ID or SMTP Up to 50 characters (Blank)
Password or SMTP Up to 50 characters (Blank)
Domain Receiving Up to 50 characters (Blank)
Receiving Port No. 0 65535 25
q E-mailSettings
Item Content Deault setting
Attach File Format PDF / TIFF-S / TIFF TIFF-S (T.37 simple
mode)
Insert Coversheet (I-Fax) orSubject/Text (E-mail)
Whether to insert the presetsubject and text i e-mail issent with no subject and text.
Whether to attach the senderinormation (name & e-mailaddress).
Insert text
Attached
E-mail Template Up to 10 templates can be
registered
Blank
Show recipients on Tx e-mail Yes / No Yes show all recipi-ents
When mail that cannot beanalyzed is received
Dealing with e-mail that cannotbe analyzed
Return error notice
Request receipt verifcationwhen sending mail
DSN / MDN Do not request
When mail requesting MDN isreceived
Dealing with MDN request.Up to 5 mail address or
domain can be registered.
Send MDN
When mail that requests axorwarding is received
Dealing with orwardingrequest.
Accept orwardingrequest
7/31/2019 Setup Guide En
39/40
7/31/2019 Setup Guide En
40/40
Message board InoMonitor ............. 16
V
Veriying the IP settings ...................... 13
W
When mail that cannot be analyzed is
received .............................................. 32
When mail that requests ax orwarding
is received .......................................... 33