S R Ihree adhe ndustries

Manufacturer & Exporter of

RAFFIA TAPE PLANT, PAPER LAMINATION PLANT.

EXTRUSION COATING LAMINATION PLANT

Address :11, Sumukh Industrial Estate,Opp. Kiran Bustand, G.I.D.C., Vatva, Phase-I,Ahmedabad-382445.

E-mail : info@radheextrusions.com panchal.rajesh67@yahoo.in

Contact No. :+91 9428594414+91 9328594414

Website : www.radheextrusions.com

Contact Detail

EXTRUSION COATING LAMINATION PLANTTarpaulenee Lamination - Technical Specification

Coating Width : 4 feet to 16 feet Bag Tarpolin, Paper Lamination With & Without Turn bar attachment & Sandwhich attachment

Model SR 75 1500 SR 90 2000 SR 90 2200 SR 100 2650 SR 100 2200 SR 120 2650

Screw Dia (MM) 75 90 90 100 100 120

L/D Ratio 30:1 30:1 30:1 30:1 30:1 30:1

Die Width (MM) 1550 2000 2200 2650 3200 3850

Maximum Coating Width (MM) 1350 1850 2050 2500 3050 3650

Minimum Coating Width (MM) 1400 1200 1200 1600 2000 2600

Coating Thickness (Micron) 20 - 80 20 - 80 20 - 80 20 - 80 20 - 80 20 - 80

Max. Output (Kg./Hr.) PP 90 - 110 140 - 160 140 - 160 140 - 160 220 - 240 220 - 240

Max. Output (Kg./Hr.) LDPE 90 - 110 160 - 180 160 - 180 160 - 180 250 - 270 250 - 270

Max. Line Speed (M.P.M) 100 100 100 90 100 90

Extrusion Coating Lines (Lamination Plant) : For coating thin layer of polyolefin’s (Mainly LDPE / PP) on substrates like Paper, Cotton Cloth, Woven fabrics, jute fabric, Aluminum foil, BOPP film, Polyester film, etc. Tandem Lamination Plant For coating Circular Woven fabric, for producing multi layer laminates up to 2 layers along with the various substrates like Paper, Aluminum foil, Polyester film etc.

EXTRUSION COATING LAMINATION PLANTTarpaulenee Lamination - Technical Specification

Coating Width : 4 feet to 16 feet Bag Tarpolin, Paper Lamination With & Without Turn bar attachment & Sandwhich attachment

Model SR 75 1500 SR 90 2000 SR 90 2200 SR 100 2650 SR 100 2200 SR 120 2650

Screw Dia (MM) 75 90 90 100 100 120

L/D Ratio 30:1 30:1 30:1 30:1 30:1 30:1

Die Width (MM) 1550 2000 2200 2650 3200 3850

Maximum Coating Width (MM) 1350 1850 2050 2500 3050 3650

Minimum Coating Width (MM) 1400 1200 1200 1600 2000 2600

Coating Thickness (Micron) 20 - 80 20 - 80 20 - 80 20 - 80 20 - 80 20 - 80

Max. Output (Kg./Hr.) PP 90 - 110 140 - 160 140 - 160 140 - 160 220 - 240 220 - 240

Max. Output (Kg./Hr.) LDPE 90 - 110 160 - 180 160 - 180 160 - 180 250 - 270 250 - 270

Max. Line Speed (M.P.M) 100 100 100 90 100 90

Extrusion Coating Lines (Lamination Plant) : For coating thin layer of polyolefin’s (Mainly LDPE / PP) on substrates like Paper, Cotton Cloth, Woven fabrics, jute fabric, Aluminum foil, BOPP film, Polyester film, etc. Tandem Lamination Plant For coating Circular Woven fabric, for producing multi layer laminates up to 2 layers along with the various substrates like Paper, Aluminum foil, Polyester film etc.

PP/HDPE/TAPE PLANTTechnical Specification

Model : 50mm, 65mm, 75mm, 90mm 110mm,120mmMelt Capacity : 35kg / hr / to 450kg / hr Denier : 450 to 1200

Model SR 65 SR 75 SR 80 SR 90 SR 105

Screw Dia (MM) 65 75 80 90 105

L/D Ratio 32:1 32:1 32:1 32:1 32:1

Die Width (MM) 700 800 950 1050 1300

Maximum Output PP 110 130 160 200 300

No. of Cheese Winders 120 140 170 190 210

Max. Line Speed 300 325 325 325 325

Godet Die (MM) 320 320 320 320 450

No. of Godet Rolls 3/5 3/5 3/5 3/5 3/6

*Specification subject to change without prior notice due to continuous developments. These are indicative and not binding. Please refer quotation for technical details and scop or supply. It is not possible to reach all maximum values at the same time.