sillas-oficina-tnk-ficha-tecnica-en.pdf

8/11/2019 sillas-oficina-tnk-ficha-tecnica-en.pdf

1/15

TNK

Code: FTS 1007 021Description: Operative chair, general use


2/15

TNK

TNK FTS

1010 021

1

3

C

4

D

2

Technical ProfileFEATURES

SYNCHRO MECHANIMS

Synchro mechanism is activated from handles under the seat in

the left hand side (sitting in the chair). Pressing up (A)handle, the

mechanism is jammed. To release it, press it up again. For tension

knob adjustment, pull handle (B)and turn it to get it more or less

tighten.

(Please check engraved symbols in the handle). Synchron lockable

at any position. Tension Control Knob.Tension control knobLockable / unlockable at any position

SEAT HEIGHT ADJUSTMENT

Seat height adjustment is controlled with a gas lift. The mechanism

is activated pressing handle (C)which is under the seat in the right

hand side (sitting in the chair) up

Gas lift Backrest mximum and mnimum height

SEAT SLIDE

Horizontal seat slide movement it is used to adjust the seat deep

towards the back rest depending on the users anthropometric

characteristics. To activate the mechanism, press handle (D)placed

in the right hand side, under the seat. Zipper system with 6 positions.

A self-return system moves the seat towards the backrest when the

handle is activated without any weight pressure in the seat.Sliding seat lever 7 different positions. Depth adjustment with

auto-return mechanism

BACK REST KNEE-TILT SYSTEM

TNKhas double knee-tilt system to control back rest. The resistance

is regulated by the tension knob First function is to control speed of

the back movement throughout gas cylinder. Second function is to

absorb strength caused by the user weight

Gas lift controls the speed of the tilt return

Backrestrotation axle

Seet kneetilt advancedrotation axle

Return springregulated by the

tension knob

99

109


3/15

TNK

TNKFTS

1010 021

5

E E

F

7

6

8

Technical Profile FEATURES

TNK 10 TNK 40

LUMBAR ADJUSTMENT(serie 30)

TNKhas a lumbar support adjustment. Move up and down (E)

control in the back of the chair. The elastic mesh of the back is

automatically adapted to each user making pressure in those

points where the weight is stronger.

LUMBAR ADJUSTMENT

Serie 10 and 40 has lumbar support adjustment. Move up and

down by sliding (G)control at both sides of the back.

ADJUSTABLE ARMS

Adjustable arms: it is activated pressing the control under the

armrests (F). 5 positions +30 pivoting system is used to turn

the armrests horizontally and adjust distances between the two

armrests depending on the user size.

Lumbar support at the lowest position

Height adjustable arm 30 movement pivoting arm

Lumbar support at the highest position

CASTORS AND CAPS

Weight control castorsBlack castor Black capsAntistatic castors

Soft band 65 mm anti-skid castors in black finish. Optional Security

castorswith auto-lockable system, avoiding the undesired chair

move (when sitting the castors move normally but when stand

up the castors auto-lock). Black Polypropylene (PP) caps with

antiskid rubber.


4/15

TNK

TNK FTS

1010 021

3

1

2

Technical ProfileERGONOMICS

A correct posture at work to avoid physical problems

Different ergonomics conditions and specific mobility for each task

Seat adjustment.

Forearms must be parallel to the desk top

as in a right angle with the rest of the arm.Both feet must be lean on the floor and

knees must be in right angle too.

Lumbar Support Adjustment

Adjust the Lumbar support height to get the

back totally rested and the weight totallysupported.

Adjustable arms (5 positions)

Place the chair arms in the lower position

to get better mobility. For statics works,adjust height and distance to that point

where the forearms perfectly lean.

Incorrect Postures

It is necessary to alternate daily dynamic and static tasks.

Dynamic tasks.

Document manipulation, communication and so onFree the synchro

mechanism and adjust weight and height. Place armrests in the lower

position.

Static work

Document analysis and writing, intensive computer work...

Blocked synchro mechanism and use armrests properly.

Key points.

1.A lower position from the desk produces neck pain.

2. An incorrect back support produces lumbar

problems.

3. Legs too stretched or too vended causes body joints

over-stressed.

Dynamic tasks.


5/15

TNK

TNKFTS

1010 021

NET

PLUS

STRING

UPHOLSTERED BACK AND SEAT

GROUPD

GROUPD

GROUP T-C

GROUP T-C

GROUP K

GROUP K

GROUP M - MELANGE

GROUP M - MELANGE

GROUPP

GROUPN

GROUPN

TECHNICAL MESH BACK REST

SEAT BACK

GROUP H - HARLEQUIN

GROUP H - HARLEQUIN

GROUP G - OMEGA 3D

GROUP G - OMEGA 3D

BACK AND SEAT

FABRICFABRIC

Black White

Technical Profile


6/15

TNK

TNK FTS

1010 021

1

2

3

4

5

6

7

8

9

1

2

3

4

5

6

7

8

9

Technical Profile

DESCRIPTION

Shell Black or dark grey polypropylene (P.P)

back rest, with moulded foam PUR flexible

(40kg/m3). Internal lumbar adjustment. Seat

black or dark grey polypropylene (P.P) cover

seat with injected viscoelastic foam upholstered

with fabrics. Height adjustable seat by gas lift.

Depth seat adjustment seat (50 mm). Return

spring system. Moulded aluminium 5 star

swivel base. Polyamide (PA6) castors and soft

band TPU.

SIZES

BACK AND SEAT

SIZES

BASES AND CASTORS

Height adjustable arms and anti-panic system

Polypropylene (P.P)shell

Lumbar adjustment

Gas lift

Synchro anti-tilt mechanisms patented

Moulded aluminium 5 star base

Anti-skid castors. Polyamide (PA6). Soft band TPU

Silver aluminium mechanism

Black polyamide base, 30% fibre glass - 67,5 cm

Black anti-skid castor - 65 mm


Silver aluminium base - 67,5 cm


Polished aluminium mechanism

Polished aluminium base - 67,5 cm


Seat height:from 460 mm to 560 mm

Seat width: 410 mm

Seat depth:from 420 mm to 460 mm

Total height:990 to 1.090 mm

Total width:675 mm

Total depth: 675 mm

Covered by moulded foam (40kg/m3) PU flexible

SERIE 10

Viscoelastic foam seat upholstered in different finishes

Fabric:Group T-C, Group K and Group M-Melange

(See finishes and fabric card previous page)

67,5

41

99

-109

46

-56

42 - 46

67,5

41

47

99

-109

46

-56

17

-

24

42 - 47


7/15

TNK

TNKFTS

1010 021

ACTIU

PROD

UCE

YUTILIZATAB

LEROS

CLAS

EE1

STANDARD-NORM

A

EUR

OPEA

EN 13986

E1

UNE-EN ISO 9001:2008EN ISO 14006:2011 UNE-EN ISO 14001:2004PEFC/04-31-0782

The mark of

responsable forestry

Technical Profile

PRODUCTION

DISPOSAL

USE

TRANSPORT

CERTIFICATES AND REFERENCES

MATERIALS

Easy to clean

and maintenance

Energy use is optimized during the production process.Minimum environmental impact. Last generationtechnological system in coating processes. Painting thathave not been used is recovered to use it again. Zero COVsemissions and other contaminant gas. Close water circuit

to clean the metals. Heat recovery. Automatic manufacturesystems. Cut process is planned.

Long lasting use. Spare parts and replacements available.Easy to clean and maintenance.

Optimum packaging to reduce space in transport and saveenergy.

The different programmes get points in different environmental categories to get the LEED certificate (sustainability, material and resources, water, energy and atmosphere, inner environment quality,innovation and design).

100%recycable Aluminium100% recycable Steel

Recycled package and thinner

free 100% recycable carton

ECODESIGN

TNK SERIE 10has been designed to be manufactured withrecycled materials 66,13%, danger substances such aschrome, mercury or cadmium are not used in big quantity.Recycables Aluminium and Steel 100%. Organic volatileComponents. Packages manufactured with recycled carton.Ink thinner free.

66,13%recycliedmaterials

93,33%recyclablematerials

93,33% recycable. Easy and quick to split TNK SERIE 10components. Packages are reuse by our supplier to avoidwaste generation. Carton used in packages is recyclable.

PEFC Certificate E1 by EN 13986 CertificateISO 9001 CertificateECODESIGN Certificate ISO 14001 Certificate

Leadership in Energy & Environmental Design

ACTIU TECHNOLOGICAL PARK

project certified as LEEDGOLDby U.S. Green Building Council 2011


8/15

TNK

TNK FTS

1010 021

1

2

3

4

5

6

7

1

2

3

4

5

6

7

Technical ProfileSERIE 20

Moulded flexible foam PU flexible (40kg/m3)

over steel metal frame 6 x 1,5 mm thickness.

Upholstered. Two different models, headrestor without headrest. Moulded polypropylene

(P.P). Seat black or dark grey polypropylene

(P.P) cover seat with injected viscoelastic foam

upholstered with fabrics. Height adjustable seat

by gas lift. Depth seat adjustment seat (50 mm).

Return spring system. Moulded aluminium 5

star swivel base. Polyamide (PA6) castors and

soft band TPU.

BACK AND SEAT

SIZES

medium back high back with headrest

SIZES


Moulded foam PU flexible 40kg/m3

Gas lift

Patented synchro-evolutive knee-tilt mechanism


Seat width: 410 mm


Total height:from 1.020 to 1.120 mm

Total width:675 mm

Total depth: 675 mm



DESCRIPTION


BASES AND CASTORS

Fabric:Group T-C, Group K, Group M-Melange,

Group N, Group D and Group P











67,5

41

102

-112

46

-

56

42 - 46

67,5

41

47

102

-11

2

46

-

56

17

-2

4

42 - 46 120-

130

67,5

41

47

46

-56

17

-24

42 - 47


9/15

TNK

TNKFTS

1010 021

ACTIU

PROD

UCE

YUTILIZATAB

LEROS

CLAS

EE1

STANDARD-NORM

A

EUR

OPEA

EN 13986

E1


The mark of


Technical Profile

PRODUCTION

DISPOSAL

USE

TRANSPORT


MATERIALS

Easy to clean

and maintenance









ECODESIGN




95,04 % recycable. Easy and quick to split TNK SERIE 20components. Packages are reuse by our supplier to avoidwaste generation. Carton used in packages is recyclable.






10/15

TNK

TNK FTS

1010 021

1

2

3

4

5

6

7

8

1

2

3

4

56

7

8


DESCRIPTION

Backrest, polyamide (glass fibre) frame,

elastic technical mesh composed by

64% polyester and 36% polyamide.

Breathable.Moulded polypropylene (P.P).

Seat black or dark grey polypropylene

(P.P) cover seat with injected viscoelastic

foam upholstered with fabrics. Height

adjustable seat by gas lift. Depth seat

adjustment seat (50 mm). Return spring

system. Moulded aluminium 5 star swivel

base. Polyamide (PA6) castors and soft

band TPU.

SIZESSIZES


OptionalLumbar support

Polyamide frame manufactured with glass fibre

Gas lift





BASES AND CASTORS

BACK

SEATFabric:Group T-C, Group K , Group N, Group D,

Group M-Melange, Group H-Harlequin and Group G-Omega 3D.


Fabric:NET, PLUS, STRING, Group H-Harlequin,

and Group G-Omega 3D.


Seat height:from 460 mm to 560 mmSeat width: 410 mm



Total width:675 mm

Total depth: 675 mm










67,546

-56

42 - 46

67,5

41

47

99

-109

46

-56

17

-24

42 - 47

41

9

9

-109


11/15

TNK

TNKFTS

1010 021

ACTIU

PROD

UCE

YUTILIZATAB

LEROS

CLAS

EE1

STANDARD-NORM

A

EUR

OPEA

EN 13986

E1


The mark of


Technical Profile

PRODUCTION

DISPOSAL

USE

TRANSPORT


MATERIALS

Easy to clean

and maintenance









ECODESIGN




93,57 % recycable. Easy and quick to split TNK SERIE 30components. Packages are reuse by our supplier to avoidwaste generation. Carton used in packages is recyclable.






12/15

TNK

TNK FTS

1010 021

1

2

3

4

5

6

7

8

9

1

2

3

4

5

67

8

9


DESCRIPTION

Polyamide frame manufactured with fibre glass

and moulded polypropylene (P.P) membrane.

Ergonomics and breathable back rest. Mouldedpolypropylene (P.P). Seat black or dark grey

polypropylene (P.P) cover seat with injected

viscoelastic foam upholstered with fabrics.

Height adjustable system by gas lift. Depth

seat adjustment (50 mm). Return spring

system. Moulded aluminium 5 star swivel base.

Polyamide (PA6) castors and soft band TPU.

BACK

SEAT

SIZESSIZES

Height adjustable arm and anti-panic system

Membrane back Polypropylene

Polyamide frame manufactured with glass fibre

Gas lift


Lumbar adjustment


Anti-skid castors. Polyamide (PA6) soft band TPU


BASES AND CASTORS

Fabric:Group T-C, Group K, Group N, Group D and

Group M-Melange



Seat width: 410 mm



Total width:675 mm

Total depth: 675 mm










67,5

41

99

-109

46

-56

42 - 46

67,5

41

47

99

-109

46

-56

17

-24

42 - 47


13/15

TNK

TNKFTS

1010 021

ACTIU

PROD

UCE

YUTILIZATAB

LEROS

CLAS

EE1

STANDARD-NORM

A

EUR

OPEA

EN 13986

E1


The mark of


Technical Profile

PRODUCTION

DISPOSAL

USE

TRANSPORT


MATERIALS

Easy to clean

and maintenance









ECODESIGN




87,84% recycable. Easy and quick to split TNK SERIE 40components. Packages are reuse by our supplier to avoidwaste generation. Carton used in packages is recyclable.






14/15

TNK

TNK FTS

1010 021

Technical ProfileSTANDARDS

ERGONOMICS

TNKavailable for all type of users. Perfect for any need and keep users posture in a natural way without any manual adjustment.

STANDARDS

TNK has passed tests done in our technical department as well as the tests done in AIDIMAthe Technological Institute for furniture. The tests

correspond to:

Operative chairs standards applied since 2009

- UNE-EN 1335-1:01. Office Furniture. Office chair. Part 1: Dimensions.

- UNE-EN 1335-2:09. Office Furniture. Office Chair. Part 2: Security requirements

- UNE-EN 1335-2:09.Office Furniture. Office chair. Part 3: Security essays.

- BS 5459-2:2008. Specification for performance requirements and tests for office furniture. Office pedestal seating for use by persons weighing up

to 150 kg. and for use up to 24 hours a day, including type-approval tests for individual components.

ECOLOGY

ENERGY SAVING

The new technological production system included, reduce the energy resources used to manufacture each component. Materials are very well used

to avoid wastes.

RECYCLED AND RECYCABLE MATERIALS

ACTIU environmental policy opts to use recycled materials in those components where functionality and lasting is not a condition. Materials used in

TNK such as Aluminium or Steel are totally recyclable.


15/15

TNKTechnical Profile REMARKABLE VALUES

REMARKABLE VALUES

1 -Programme designed, developed and totally manufactured by Actiu. Registered product as an European and International design.

2 -Synchro anti-tilt mechanisms patented by ACTIU

Research and Development investment has allowed developing and manufacturing the inner mechanisms integrating each component in the design.

The programme gets a unified aesthetics and reduces production costs.

3 - The result is an excellent COST-EFFECTIVEprogramme, totally guarantee which includes all necessary functions for an intensive use in offices as

well as a very competitive price.

4 Painting process:

Actiu painting plant has minimum environmental impact against the traditional industry processes.

Treatment is done by polarized coating and compacted with temperature. We get homogeneous and regular application with 98% of painting

and the remaining 2% is used to produce other paints. Paints used are COVs free (Volatile Organic Components) which are very dangerous for the

environment. All water used in the process is re-used, so we get zero dump. The process is free in heavy metal, phosphate, organic components and

DQD (Biochemical demand of Oxygen). The program gives us an exact control of thickness, so it provides us with standard thickness (90 micron).

Documents

sillas-oficina-tnk-ficha-tecnica-en.pdf