of 45 /45
Studio Modena Ingegneria S.r.l. Pag.1/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234 Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected] SM INGEGNERIA S.R.L. CURRICULUM APRIL 2014

Studio Modena Ingegneria S.r.l. · Studio Modena Ingegneria S.r.l. Pag.1/45 Via dell'Artigianato, 7 - 37066 Caselle di Somma campagna (VR) - ITALY - C.F. e P.IVA 03170060234 Tel (+39)

  • Author
    others

  • View
    0

  • Download
    0

Embed Size (px)

Text of Studio Modena Ingegneria S.r.l. · Studio Modena Ingegneria S.r.l. Pag.1/45 Via dell'Artigianato, 7...

  • Studio Modena Ingegneria S.r.l.

    Pag.1/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    SM INGEGNERIA S.R.L. C U R R I C U L U M

    APRIL 2014

  • Studio Modena Ingegneria S.r.l.

    Pag.2/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    S.M. INGEGNERIA S.R.L. Registered and administrative office: Via dell’Artigianato, 7 – 37060 Caselle di Sommacampagna - Verona Tel. +39 (45) 8581711 Telefax +39 (45) 8589182 E-mail: [email protected] VAT number: 03170060234 Operative headquarters: Verona: Via dell’Artigianato, 7 - 37060 Caselle di Sommacampagna (VR) Tel (+39) 45 8581711 Telefax (+39) 45 8589182 E-mail: [email protected] Padova: Via Longhin, 23 - 35129 Padova Tel (+39) 49 8070445 Telefax (+39) 49 8070445 E-mail: [email protected] web: www.smingegneria.it SM Ingegneria s.r.l. was established in September 2001. The firm is based on previous professional experience, since 1990, of Eng. Claudio Modena, Full Professor of Structural Engineering at University of Padua. SM Ingegneria operates in the field of civil engineering dealing with road infrastructures, building and industrial structures, special structures and foundations. The firm is highly skilled in restoration of historic masonry buildings, seismic adjustment and consolidation of reinforced concrete buildings and bridges. In these areas the engineering firm developed highly specialized technical and scientific aspects and advanced applications tools for structural analysis (e.g. theoretical-experimental methods of evaluation of structural efficiency of buildings and bridges) and constructive technologies (e.g. by using of the fibre-reinforced polymer both in monumental building and transport infrastructures).

  • Studio Modena Ingegneria S.r.l.

    Pag.3/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    CHAIRMAN AND DIRECTOR Chairman and director of SM Ingegneria is Prof. Claudio Modena, born on June 12, 1946 in Sommacampagna (VR), Italy. He graduated "summa cum laude" in Civil Engineering from the University of Padua (www.dicea.unipd.it) in 1970. He received a triennial Research Scholarship from the Ministry of Education and in 1974 he was appointed Assistant Professor of Structural Engineering at Padua University. Prof. Claudio Modena is Full Professor of Structural Engineering and director of the Material Testing Laboratory at the Department of Structural Engineering of University of Padua. He is also a Technical and Scientific Head of SIL – Integrated System of University and Independent Laboratories in Padua Since 2000 he has held the course of "Structural Problems of Monumental Historical Heritage" in Architectural and Building Engineering and the specializing course of "Historical Constructions Restoration" for Architects and Engineers Since 2002 Prof. Claudio Modena has been a Postgraduate Master Course Director in: Structural restoration of monuments and historic buildings Infrastructure design with regard to the accomplishment of the territorial designs Prof. Claudio Modena has been admitted into the Association of Engineers of Verona, Italy, with no. 830, since 11/03/71. He is also a registered technical tester specialist for constructions, bridges, buildings and special structures.

  • Studio Modena Ingegneria S.r.l.

    Pag.4/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    TEAM Name Position Educational qualification Claudio Modena Legal representative and technical

    manager Full Professor of Structural Engineering of University of Padua Civil Engineering Degree (Transports)

    Carlo Bettio Project Leader Civil Engineering Degree

    Federico Reginato Project Leader Civil Engineering Degree (Structures)

    Mirko Stoppa Project Leader Civil Engineering Degree (Structures)

    Claudia Fasolo Administrative area Law Degree

    Marina Sega Administrative area Enology Degree

    Francesca Lucchin Construction site assistant/Designer Construction Engineering Degree (Building Preservation and Restoration)

    Massimiliano Mesaroli Construction site assistant/Designer Construction Engineering Degree

    Marco Mocellini Construction site assistant/Designer Construction Engineering Degree

    Alessio Perlini Construction site assistant/Designer Civil Engineering Degree (Structures)

    Elena Simonato Construction site assistant/Designer Construction Engineering Degree (Architectural design)

    Giovanni Tecchio Construction site assistant/Designer Civil Engineering Degree (Structures) Civil and Environmental Engineering Philosophy Doctor

    Emanuele Terrini Construction site assistant/Designer Civil Engineering Degree (Structures)

    Alice Bartolozzi Construction site assistant/Junior Designer Construction Engineering Degree

    Elvis Cescatti Junior Designer Construction Engineering Degree

    Stefano Filippini Construction site assistant/Junior Designer Civil Engineering Degree

    Marco Franceschetti Junior Designer Civil Engineering Degree (Structures)

    Sara Lo Cacciato Junior Designer Construction Engineering Degree

    Jacopo Magi Construction site assistant/Junior Designer Civil Engineering Degree

    Enrico Manfrin Construction site assistant/Junior Designer Construction Engineering Degree

    Manuel Marotto Construction site assistant/Junior Designer Construction Engineering Degree

    Emanuele Martini Junior Designer Civil Engineering Degree (Structures)

  • Studio Modena Ingegneria S.r.l.

    Pag.5/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Enrico Mazzocato Junior Designer Civil Engineering Degree (Structures)

    Albino Mirandola Junior Designer Laurea in Ingegneria Edile

    Nicola Prodomi Junior Designer Civil Engineering Degree (Structures)

    Daniela Ravagnin Construction site assistant/Junior Designer Construction Engineering Degree (Building Preservation and Restoration)

    Stefano Signorini Junior Designer Civil Engineering Degree (Structures)

    Mirko Sgaravato Construction site assistant/Junior Designer Civil Engineering Degree (Structures)

    Angela Valdesolo Construction site assistant/Junior Designer Construction Engineering Degree

    Edoardo Xodo Construction site assistant/Junior Designer Construction Engineering Degree (Building Preservation and Restoration)

    Marco Zampierin Junior Designer Civil Engineering Degree (Structures)

    Andrea Formigoni CAD Surveyor certificate

    Michele Vicentini Construction site assistant Surveyor certificate

    Fabio Bergo External member of team Civil Engineering Degree (Structures)

    Giulia Bettiol External member of team Construction Engineering Degree

    Study and Preservations of Archeological and Architectural Heritage Philosophy Doctor

    Marco Munari

    External member of team Construction Engineering Degree Science and Technology for Study and Preservation of Archeological and Architectural Heritage Philosophy Doctor

    Marco Pastorino External member of team Architecture Degree CAD & 3D graphics For several years external members of team have participated in activities of the firm, so they have a good knowledge of working procedures and operative hardware and software. Moreover, when required, SM Ingegneria works together with qualified laboratories and consultants which provide a variety of support activities such as on-site measurements, surveys and tests in order to define the physical, chemical and mechanical parameters of existing structures.

  • Studio Modena Ingegneria S.r.l.

    Pag.6/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    RESTORATION PROJECTS In the field of conservation and restoration SM Ingegneria has been involved in numerous interventions of static consolidation, most of all, of the important monumental buildings. General restoration design, evaluation of stability and static consolidation of the Roman Amphitheatre (Arena) in Verona (in progress, total amount is about 25,8 millions of euro) commissioned by Architectural Protection Board of Veneto and Town of Verona;

    Arena of Verona: view toward the stalls

    Works supervision assistance and static consolidation design of Palazzo della Gran Guardia in Piazza dei Signori in Padua (completed, total amount is about 2 millions of euro) commissioned by Town of Padua; Stability analysis, works supervision and static consolidation of Palazzo della Ragione in Padua (completed, total amount is about 9 millions of euro) commissioned by Town of Padua;

    Palazzo della Ragione: general view

    Assistance for works supervision and static consolidation design in regard to restoration of the bell tower of the Cathedral Dome of Monza (completed, total amount is about 2,58 millions of euro) commissioned by St. John the Baptist Parish – Monza cathedral dome;

  • Studio Modena Ingegneria S.r.l.

    Pag.7/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Static consolidation design of Torre Bissara situated in Piazza dei Signori in Vicenza and works supervision (completed, total amount is about 1,03 millions of euro) commissioned by Town of Vicenza;

    Torre Bissara: view from Piazza delle Erbe and new cupola interior

    Assistance for works supervision and static consolidation design in regard to restoration and reconstruction, with destination for health and welfare residence, of Villa Trevisan Savioli in Abano Terme (PD) – 4.000 m3 (completed, total amount is about 2,3 millions of euro) commissioned by Abano Terme municipality; Final restoration design of Palazzo Ducale di Urbino (in progress, total amount is about 7,8 millions of euro) commissioned by Superintendence for the Environmental and Archaeological Heritage of Marche;

    Palazzo Ducale di Urbino: general view

    Stability analysis, works supervision and static consolidation design of the surrounding walls of Este Castle (total amount is about 5,6 millions of euro) commissioned by Town of Este

  • Studio Modena Ingegneria S.r.l.

    Pag.8/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Preliminary structural design for the new cultural area “Arsenale 2000: la città della natura e della musica” (in progress, total cost is about 98 millions of euro – cost of structure is about 20 millions of euro) – general design of Prof. Arch. David Chipperfield

    Verona Former Armory: clockwise from above, view of the existing main building, rendering of the new museum and existing

    structure FEM modeling Consultation related to the structural design for restoration of covering of “Tese” in “Galeazze” section of Venice Armory (total amount is about 3,9 millions of euro) commissioned by THETIS spa;

    Arsenale di Venezia: “Tese” (left) and “Alberaria” tower (right)

  • Studio Modena Ingegneria S.r.l.

    Pag.9/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Static consolidation design of the monumental complex S. Corona, commissioned by Vicenza Municipality;

    Santa Corona Church: general view and facade FEM model

    Structural design for functional rehabilitation of the cloisters and the church of Santa Corona in Vicenza, general designer arch. Nicola di Battista (total cost is about 11,7 millions of euro – cost of structure is about 3,9 millions of euro)

    Santa Corona complex: eastern view of the major cloister

    Stability analysis, final and construction design of the former Teatini convent, seat of Justice Court, in order to transform in the Civic Art Centre of Padua – about 70.000 m3 (total amount is about 10,3 millions of euro);

    Former Teatini convent: internal courtyard rendering

  • Studio Modena Ingegneria S.r.l.

    Pag.11/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Analysis of constructive and static conditions, static consolidation of Stabilimento Pedrocchi in Padua, commissioned by Town of Padua; Analysis of stability conditions (static and dynamic behaviour) and preliminary design for static consolidation of Maniace Castel (Siracusa) (total amount is about 7,23 millions of euro), commissioned by Superintendence of Siracusa;

    Castel Maniace – view form above (left) hypostyle hall (right)

    Analysis of stability conditions and necessity for static consolidation of Palazzo Bottagisio in Verona, seat of Provincial Council of Verona, commissioned by Province of Verona;

    Palazzo Bottagisio: view form Leoni St.

    Analysis of stability conditions (static and dynamic behaviour) and preliminary evaluation of static consolidation of S. Agata Church (Catania), in collaboration with ISMES from Bergamo, commissioned by Genio Civile (public works office) of Catania; Structural consultation on the design for restoration of Palazzo del Senato, seat of State Archives of Milano, Ministry of Cultural Activities and Heritage; Design for static consolidation of Palazzo Bruno of Belmonte, seat of Local Council of Ispica (SR); Design for static consolidation of Town Theatre of Sortino (SR); Design for static consolidation of Corte Ca’ del Bue (rural complex with master’s house - 1500 m2), commissioned by AGSM (municipal general services) of Verona;

  • Studio Modena Ingegneria S.r.l.

    Pag.12/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Conception and design of internal support structure for angel statue of S. Antonio Basilica in Padua;

    Angel statue of S. Antonio Basilica: internal support structure

    Structural design for restoration of the historical wall situated in Piazza Vescovado 5a (“Casa del Clero”), including propping and temporary works for structural safety. Works were designned after the collapse of the wall along Vicolo Fontanelle-Vicolo Accoliti and Piazza Vescovado, commissioned by Fondazione della Casa del Clero (Verona); Structural design for restoration of S. Antonio Basilica (replacement of angel statue on the cupola) and of Biblioteca Antoniana (support structure of the false ceiling), commissioned by Arte & Restauro from Padua;

    Biblioteca Antoniana: ceiling frescoes (left) new aluminium support structure (right)

    Works supervision and structural construction design for the new polyfunctional room of Palazzo TREVES in Verona, seat of Fondazione Cassa di Risparmio VR-VI-BL-AN, commissioned by Fondazione Cassa di Risparmio VR-VI-BL-AN;

    Palazzo Treves (VR): laying the new steel portal

  • Studio Modena Ingegneria S.r.l.

    Pag.13/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Structural construction design for restoration of S. Giovanni in Valle church in Verona (total amount is about 1,5 millions of euro)

    San Giovanni in Valle Church (VR):

    belfry (left) apse (right)- works completed Analysis of static behaviour of masonry structure of the stage area and design for consolidation and restoration of Town Theatre of Treviso (total amount is about 15 millions of euro), in collaboration with Ing. Bertanzon, general design of Studio Associato Paolo e Francesco Bandiera from Treviso; Analysis of structural behaviour and consultation about structural design for consolidation of the bell-tower at Santa Maria Gloriosa dei Frari Basilica in Venice (total amount is about 1 million of euro, in progress), commissioned by Superintendence for the Archaeological Heritage of Venice;

    Santa Maria Gloriosa dei Frari Basilica (VE):

    tower-bell (left) and FEM modelling (right)

  • Studio Modena Ingegneria S.r.l.

    Pag.15/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Conception and design of titanium-glass reliquary in order to reallocate the corpse of Francesco Petrarca to the sepulchral tomb in Arquà Petrarca, commissioned by Town of Arquà Petrarca;

    Francesco Petrarca sepulchral tomb in Arquà (PD):

    Positioning of the new titanium-glass reliquary Structural design for restoration of S. Maria in Organo Church in Verona (total amount is about 1 million of euro, completed); Structural design for extraordinary maintenance of the revolving house called “Villa Girasole” situated in Marcelise (VR), designed by Ing. Angelo Invernizzi (1884-1958), commissioned by Fondazione “Villa Girasole”;

    Girasole Villa in Marcellise (VR):

    light tower (left) internal elliptical stairs (right) Structural design for conservative restoration and consolidation of S. Maria Assunta Cathedral in Volterra (PI), baptistery and Palazzo Vescovile, realization of the new diocesan museum (total amount of structures is about 2,5 millions of euro), commissioned by Diocese of Volterra;

  • Studio Modena Ingegneria S.r.l.

    Pag.16/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Construction design for static consolidation of Cittadella’s fortified system, commissioned by Town of Cittadella (PD);

    Walls of Cittadella (PD): during works

    Works supervision and design for restoration and requalification of the bastions of Alicorno, Moro I and II, S. Giustina in the park of the walls and of the water in Padua, commissioned by Town of Padua;

    S. Giustina bastion (PD): before (left) and after (right) restoration works

  • Studio Modena Ingegneria S.r.l.

    Pag.17/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Structural design for restoration and valorisation of the medieval complex of Fienga Castle located in Nocera Inferiore, commissioned by Town of Nocera Inferiore, general designers: arch. Nicola Di Battista e arch. Edouardo Souto De Moura

    Fienga Castle

    Construction design for consolidation, static adjustment and reinforcement of the internal ramps of Unicredit buildings in Verona, commissioned by Unicredit Real Estate; Construction design for restoration of the monumental complex of the Scala Arches in Verona, commissioned by Protection Board for Architectural Heritage and the Landscape of Verona, Vicenza and Rovigo;

    Cansignorio Arch(VR): general view (left) statue detail (right)

  • Studio Modena Ingegneria S.r.l.

    Pag.18/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Safety coordination in designing and execution phase, final and construction design for adjustment of the orchestra pit and underground crossings in Roman Amphitheatre (Arena) of Verona, commissioned by Town of Verona;

    Arena di Verona (VR): steel structure supporting the r.c. slab (left) and panoramic view of the central wood deck of the “Golfo

    Mistico” (right) Collaboration for feasibility study of requalification of the area called “Ex Magazzini Generali” in Verona prepared by Prof. Richard Burdett from London

    Ex Magazzini Generali: 3D view

    Structural design for “Eugenio Battisti” Labor and Industry Museum, commissioned by Town of Brescia, general design of Kleihues+Schuwerk Gesellschaft von Architekten mbH form Berlin (total amount of structures is about 7,3 millions of euro);

    “Eugenio Battisti” Work and Industry Museum (Brescia): rendering

  • Studio Modena Ingegneria S.r.l.

    Pag.19/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Works supervision and construction design for conservative restoration and cultural valorization with functional and residential adjustment of the ex S. Silvestro convent, (total amount of structures is about 2,5 millions of euro, completed);

    Ex San Silvestro convent, internal cloisters

    Work supervision, safety coordination, final and construction design for restoration of the civic theatre of Schio, situated in Maraschin St., commissioned by Schio Municipality (total amount of structures is about 2,5 millions of euro, completed); Final and construction design for restoration of the auditorium and structural improvement of Asilo Rossi future Music Palace of Schio, commissioned by Schio Municipality (total amount of structures is about 390 thousands of euro, completed); Final and construction design for conservative restoration and renovation, with change of use, of the building n. 27 situated in the area of “Ex Magazzini Generali” of Verona (general warehouses), commissioned by Fondazione Cariverona (total amount of structures is about 1,5 millions of euro, completed);

    Building n° 27 current state

  • Studio Modena Ingegneria S.r.l.

    Pag.20/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Monument in memory of the Second World War deportees (VR) structural design, construction management, safety coordination during design and construction of the structures of the monument of the sculptor Pino Castagna (2008-2009;

    Steel construction at the base of the monument and a final view

    St. Joseph's Oratory of Minims in Aquila: restoration and consolidation of the oratory, repairing the damage caused by Earthquake of April 6, 2009. The activities included the final design of interventions of structural consolidation, analysis and seismic verification of the structure. Church of San Marco in L'Aquila: structural consultancy on behalf of the Veneto Region in the context of actions for the recovery of the church of San Marco in the historic center of L'Aquila, badly damaged by the earthquake of 6 April 2009. The project, funded by the Veneto Region, provides a first phase of construction of temporary structures for retaining the tip of the walls and roof of the apse. Within the project of securing, the University of Padua has installed a system for monitoring and analysis of the main lesions of the dynamic behavior of the structure. The second phase, currently, provides the structural and architectural restoration of the church.

    Inside the church The collapse of a portion of the aisle.

    Scaffolding strength for retaining the apse and transept:

    exterior view. Scaffolding strength for retaining the apse and transept:

    internal view.

  • Studio Modena Ingegneria S.r.l.

    Pag.21/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Church of St. Peter the Apostle (Onna, L'Aquila): recovery, consolidation and restoration of the church and outbuildings in Onna, near L'Aquila, repairing the damage caused by Earthquake of April 6, 2009. In collaboration with Ing. Cesare Cimino, Arch. Marsili and Dr. Corrado, Bianca Maria Colassacco (Office Deputy Commissioner delegate for the Protection of Cultural Heritage) on behalf of the Interregional Public Works for Lazio, Abruzzo and Sardinia. The activities have included surveys and the coordination of site investigation and the final design of the restoration of architectural and structural reinforcement.

    Church of St. Peter the Apostle: partially collapsed facade and essays in foundation.

    Church of San Domenico in L'Aquila, design, with the architect Paolo Rocchi, and assistance for the recovery of the church in the historic center of L'Aquila, damaged by the earthquake of 6 April 2009 on behalf of the Interregional Public Works for Lazio, Abruzzo and Sardinia. The activities have included the design for the safety, running a campaign site investigation for the characterization of materials and structure, design and installation of a monitoring system of the structure, study and verification of static structural and seismic behavior of the church, the project of restoration and architectural structure.

    Propping on the facade of the transept. Propping on the main facade.

    Injuries caused by overturn of the apse. Collapse of the vault of the aisle.

  • Studio Modena Ingegneria S.r.l.

    Pag.22/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Church of San Biagio d'Amiterno in Aquila, restoration and consolidation of the church, following the damage caused by Earthquake of April 6, 2009, in collaboration with and on behalf of the arch. Salvatore Tringali and Rosanna La Rosa. The activities have covered the final design of structural consolidation, analysis and seismic verification of the structure.

    Church of San Biagio d'Amiterno: partial collapse of the facade and numerical model.

    Teatro Nazionale d'Abruzzo in L'Aquila, works of consolidation and restoration of the theatre, repairing the damage caused by Earthquake of April 6, 2009, in collaboration with arch. Gianlorenzo Conti and arch. Joseph Santoro, on behalf of the office of Vice-Deputy Commissioner for the Protection of Cultural Heritage. The object of activities have included the analysis of the structure and damage, the coordination of site investigation to define the characteristics of the materials and structure (performed by ESSEBI and Expin Ltd., spin-off of the University of Padua), mathematical modeling and kinematic calculation for determining the seismic behavior of the structure, the preliminary design of the restoration and consolidation (amount of work equal to about 12 million euros) and the final design of structural (amount 1.2 million euros).

    Theatre (l’Aquila): facade and numeric modelling.

    Head office of “Genio Civile” in Verona: planning and assistance to the investigation and verification of the seismic vulnerability of the building;

    Historical photo of the building and a view of the FEM-frame equivalent modelling

  • Studio Modena Ingegneria S.r.l.

    Pag.23/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Prefecture Square Consortium in L’Aquila, technical consulting for the project of restoration, consolidation and seismic improvement of the aggregate between Via Francesco di Paola, the Prefecture square, Donadei St, Piscignola St. In collaboration with Ing. Roberto Scimia, Reluis University Consortium, University of Padua, Department Vice-Deputy Commissioner for the Protection of Cultural Heritage. The activities have included the measurement of the geometrical structure and the damage, mathematical modeling and computation for seismic kinematic structure, the project of restoration and costs estimate.

    Prefecture Square Consortium: image of damage and design sketch

    Trento Cathedral, design and construction supervision of works of consolidation and seismic improvement of the Cathedral in collaboration with prof. arch. Maria Antonietta Crippa. Ongoing activities include the design and coordination of surveys, inspections and investigations to characterize the materials of the structures, fem modeling, structural analysis and verification.

    Photos of the exterior of the cathedral and the central nave

  • Studio Modena Ingegneria S.r.l.

    Pag.24/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Cooling Station in the area of the Old General Stores in Verona, structural design for reuse as a theater-auditorium, in collaboration with arch. Mario Botta, health and safety control under design and supervision of works (works estimated amount of € 60 million) on behalf of the Foundation Cariverona. Ongoing activities include the design and coordination of structural surveys and investigations for the characterization of the materials making up the structures, the preparation of calculation models, structural analysis and verification for the final design.

    Cooling station: main entrance

    Complex of Santa Chiara in Pisa, a recovery plan developed following the award of the international design competition for the "Urban Redevelopment of University Hospital of Santa Chiara complex" on behalf of the Local Council of Pisa in association with arch. David Chipperfield (estimated amount of the works about € 160 million).

    “Piazza dei Miracoli” and “Santa Chiara” Complex as designed in the recovery plan

  • Studio Modena Ingegneria S.r.l.

    Pag.25/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Complex of Saint Peter Castle in Verona, structural design for the rehabilitation of the former Habsburg barracks named " Saint Peter Castle" with intended use for museums and cultural activities on behalf of the Cariverona Foundation in association with arch. Stefano Gris (estimated amount of the works about € 30 million).

    Aerial photo of the former Habsburg army barracks and calculation model

  • Studio Modena Ingegneria S.r.l.

    Pag.26/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    BRIDGES – VIADUCTS - TRANSPORT INFRASTRUCTURES Final and construction design of maintenance and structural consolidation of the bridges and banks of Excelsior Grand Hotel access canal in Lido di Venezia (total amount is 2.792.579,35 euro), commissioned by INSULA SPA (Venice);

    San Gallo Bridge – general view and axonometric view of the retrofit intervention

    Final and construction design, safety coordination in design and execution phase and works supervision regarding static adjustment of a bridge on the river Adige situated in Albaredo d’Adige (VR) (total amount is about 2,4 million euro), commissioned by Province of Verona;

    Albaredo Bridge (VR): general view, works completed

    Preliminary, final and construction design, safety coordination in designning and execution phase related to maintenance and adjustment of the bridges on the river Retrone along communal road S.Agostino (completed, total amount is about 2,9 millions of euro) commissioned by Società Autostrada BS-VR-VI-PD SPA;

  • Studio Modena Ingegneria S.r.l.

    Pag.27/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Works supervision, feasibility study and construction design for consolidation of the foundations of Perez Bridge (250-meter long), on the river Adige situated in Zevio (VR) along state highway n. 20 “dell’Adige e del Tartaro” (completed, total amount is 3.179.000,00 euro) commissioned by Province of Verona;

    Zevio Bridge: view from underneath

    Structural design of a bridge on the river Adige (600-meter long, 1997) and connected roads in Carpi di Villabartolomea (VR) commissioned by Province of Verona (total amount of preliminary design is about 8 millions of euro, total amount of construction design is about 14 millions of euro);

    Terrazzo Bridge: photo insertion Terrazzo Bridge under costruction

    Preliminary, final and construction design, safety coordination in designning and execution phase regarding the realization of the connection between docking wharf along the navigable canal Fissero Canalbianco Tartaro in Torretta Veneta and the state highway n. 434 “Transpolesana” – I part, commissioned by Province of Verona (completed, total amount is about 1,5 millions of euro);

    San Pietro di Legnago: photorealistic simulation

  • Studio Modena Ingegneria S.r.l.

    Pag.28/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    San Pietro di Legnago: carriageway – works completed

    Seismic adjustment of the flyover called “dell’Ospedale” (completed, total amount is about 11 millions of euro) and the flyover called “Silea” (completed, total amount is about 4,5 millions of euro) being part of Treviso ring road, commissioned by Veneto Strade SPA;

    “Silea” flyover: view from underneath

    Extension of the aircraft parking space at “Valerio Catullo” Airport in Villafranca di Verona including rainwater collection and disposal system and lighting system (completed, total amount is about 2 millions of euro), commissioned by Società Aeroporto “V. Catullo di Verona; Design for a wharf at Marghera Commercial Port (completed in 1998, total amount is about 5,16 millions of euro) “Torri di Quartesolo” flyover and interconnection junction ramp A4 – design for completion of A31 Valdastico Motorway (completed, total amount is about 37 millions of euro), commissioned by Società Autostrada BS-VR-VI-PD and R.P.A. Engineering Consultants;

  • Studio Modena Ingegneria S.r.l.

    Pag.29/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    “Torri di Quartesolo” flyover – rendering “Torri di Quartesolo”: deck during launch

    Works supervision and construction design of consolidation and extension of a bridge on the river Adige (mid-century reinforced concrete bridge, 100-meter long) situated in Sega di Cavaion Veronese, along State Highway 27/a “Napoleonica” (completed, total amount is about 1,1 millions of euro), commissioned by Province of Verona

    Sega di Cavaion bridge – works completed

    Works supervision and reconstruction design of a bridge crossing over the hydroelectric designt outfalls in Tombetta - reinforced concrete bridge, 30-meter long (completed in 1998, total amount is about 1,1 millions of euro), commissioned by Consorzio Canale Camuzzoni (VR); Supervising and monitoring of a bridge on the river Mincio (2 carriageways 15,5-meter large and 152-meter long, constituted by steel boxes and ribbed plate deck - in progress) in order to control its efficiency and safety conditions; Responsible for research about monitoring, preservation and stability of the bridges on the river Adige (14 bridges, 100-150 meter long) in the territory of Town of Verona – convention with Consorzio Padova Ricerche (research consortium) Survey project on the variant of structural design of two overpasses: Daolasa (364-meter long) and Mestriago (96-meter long) in order to modernize and improve the railway track between Trento-Malè (A.T. Del Favero srl, Trento) Construction design for realization of 350 meter length wharf along the bank of northern industrial canal of Venice Commercial Port as a continuation of Emilia Wharf (1998 -1999, total amount is about 8,5 millions of euro), commissioned by Autorità Portuale di Venezia

  • Studio Modena Ingegneria S.r.l.

    Pag.31/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Construction design of the bridge crossing Soligo river in Pieve di Soligo (TV), commissioned by Province of Treviso (total amount is about 1,5 millions of euro); Technical consultation, feasibility study, surveys of existing structures and various designs related to restoration and maintenance of motorway infrastructures, commissioned by Autostrada Brescia-Verona-Vicenza-Padova SPA; Structural construction design of a viaduct passing above “Muson dei Sassi” torrent (160-meter long) along statehighway 245 called “Castellana”, Venezia – Bassano del Grabba section, commissioned by Lonardi srl

    Viaduct on “Muson dei Sassi” torrent: steel deck launch

    Research about problems of damages to structures, caused by traffic, in particular to historic buildings, commissioned by The Region of Veneto within the framework of INTERREG program; Supervision of preservation works regarding adjustment of the bridges on the river Adige and on the Enel canal passing under Brescia – Padua motorway (total amount is about 2,78 millions of euro), commissioned Autostrada Brescia-Verona-Vicenza-Padova S.p.A.;

    Bridge on the river Adige: view form underneath – works completed

    Structural consultation related to the final and construction design of consolidation, extension and seismic improvement of San Felice Bridge on the river Piave with regard to the project of road connection between the districts of Sedico and Trichiana (BL);

  • Studio Modena Ingegneria S.r.l.

    Pag.32/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Construction design of Costalunga Bridge on the Alpone Torrent, commissioned by Town of Monteforte d’Alpone (VR), (total amount is 500 thousand s of euro);

    Costalunga Bridge: front view of the steel deck before the launch

    Final and construction design of static restoration of Bisagno Torrent covering (completed, total amount is 1,97 millions of euro), commissioned by Town of Genua; Structural final and construction design of the new bridge “Drio Piazza” on the torrent Alpone, commissioned by Town of Monteforte d’Alpone (total amount is 1,5 millions of euro); Preliminary design of Padua – Venice road connection (20-kilometer long) along the artificial ship canal including steel-concrete bridge on Brenta River (200-meter long) and steel bridge on “Nuovissimo” Canal (80-meter long) and under- and overpasses in correspondence to state and provincial roads and A13 motorway, commissioned by Società delle Autostrade di Venezia e Padova (total amount is 51,6 millions of euro);

    Bridge on “Nuovissimo” Canal: photorealistic view

    Health and safety control under design and construction phase, works supervision, preliminary, final and construction design for the connections with the variant of provincial road 19 “Ronchesana” in Albaredo d’Adige, parte 1, phase ½, commissioned by Province of Verona (total amount is about 270.000 euro);

  • Studio Modena Ingegneria S.r.l.

    Pag.33/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Albaredo Bridge: phase 1 completed

    Final and construction structural design for prolongation of “S. Carlo” wharf in the port of Garda – Verona (total amount is about 1,03 millions of euro, completed), commissioned by The Region of Veneto;

    “San Carlo” wharf – general view

    Evaluation of safety conditions and feasibility study on the extension of two bridges on the river Adige in Arcè (Bussolengo territory) and in Settimo (Pescantina territory), commissioned by Town of Bussolengo, Town of Pescantina and Province of Verona (completed in 2001); Safety coordination in designning and execution phase, works supervision, preliminary, final and construction design of works needed to restore the internal banks of the canals of Lido Isle in Venice – 1 parte, commissioned by ISULA SPA (presumed amount is about 1,63 millions of euro, in progress); Preliminary, final and construction design for adjustment, modernization and requalification of airport infrastructures – “air side” works: runway, taxiway, apron at the G. Nicelli Airport of Lido di Venezia, commissioned by Nicelli SPA and Save Engineering (total amount is about 4 millions of euro, completed); Preliminary design for realization of superficial metro connection for the Town of Verona (presumed amount is about 23,5 millions of euro);

  • Studio Modena Ingegneria S.r.l.

    Pag.34/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    LUNGADIGE GALTAROSSALUNGADIGE CAPULETI

    Verona Metro – the new bridge on the river Adige

    Final and construction design for consolidation and static adjustment of the existing bridges and realization of the new cycle/pedestrian footbridge on the river Tione in Erbè (VR) along “del Tione” provincial road 50A (total amount is about 650 thousands of euro, completed)

    Bridge on river Tione – before and after works

    New cycle/pedestrian footbridge – works completed

  • Studio Modena Ingegneria S.r.l.

    Pag.35/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    New cycle/pedestrian footbridge – works completed

    Works supervision, preliminary, final and construction design of reinforcement, functional adjustment and enlargement of San Francesco Bridge on the river Adige in Verona, (in progress, presumed amount is about 2,5 millions of euro);

    San Francesco Bridge: photorealistic view

    Technical survey of structural verification of “San Felice” bridge and technical-economical feasibility study of static and functional adjustment, commissioned by Town of Verona (total amount is about 1,5 millions of euro); Works supervision, preliminary, final and construction design for a new road connection between lower part of Garda Lake and the state highway 450, commissioned by Veneto Strade SPA (total amount is about 3,5 millions of euro); Preliminary, final and construction design for an extraordinary maintenance of a bridge on the river Chiese in Casalmoro, commissioned by Town of Mantova (total amount is 200.000 euro);

  • Studio Modena Ingegneria S.r.l.

    Pag.36/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Construction design for a new cable-stayed road bridge on the river Bacchiglione with regard to the project of prolongation of Vicenza – Rovigo “Valdastico” motorway, commissioned by GIRPA S.p.A. (completed, presumed amount is about 37 millions of euro)

    Cable - stayed road bridge on the Bacchiglione river: f.e.m. modeling Bridge over Adige River near Brentino Belluno and Dolcè (VR): feasibility study of a new bridge over the axis of communication between the S.S. 12 "Brenner" and S.P. 11 "Val d'Adige", on behalf of the municipality of Brentino (2008, estimated value of works about € 3.5 million)

    Photorealistic view

    Footbridge over the Adige River at Verona: technical service for the feasibility study of a new bridge over the Adige, link between the area of Fort Proculus and the new Polo Surgical Hospital Civile Maggiore of Verona, behalf of the Hospital of Verona (2009, estimated value of works about € 4,8 million)

    Photorealistic view

  • Studio Modena Ingegneria S.r.l.

    Pag.37/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Photorealistic view

    Bridges on the rivers Piave, Sile, Musestre, Vallio Meolo: detailed design of new bridges within the project of A4 highway enlargement with the third lane between Quarto d'Altino and San Dona di Piave, on behalf of Autovie Veneto SpA (2010, costs of the proposed works amounted to approximately € 66 million)

    Cross-section bridge over the Piave River

  • Studio Modena Ingegneria S.r.l.

    Pag.39/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Bridge over the Rio Moline (near San Lorenzo in Banale - TN) preliminary and final design, health and safety under design and construction and supervision of the restoration and reinforcement (€ 250,897.00 amount of work, project and work done between 2008 and 2011)

  • Studio Modena Ingegneria S.r.l.

    Pag.40/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    STEEL, REINFORCED CONCRETE AND PRESTRESSED REINFORCED CONCRETE STRUCTURES most significant designs since 1980 Design of the gantry cranes, commissioned by FOEM from Chiampo (VI); Design for steel structures and steel-concrete structures with regard to the design of a hotel situated in Altavilla Milicia (PA), commissioned by CRC from Ravenna; Design for reinforced concrete structures and steel-concrete structures of the new Faculty of Medicine and Surgery, University of Siena, tender-competition announced by Bortolaso SPA form Verona Design for mass-produced reinforced concrete and prestressed reinforced concrete structural elements commissioned by Foglia e Rizzi from Padova, Vecoper and Velo from Padua; Consultation on the design of high-rise buildings with weight-bearing walls, commissioned by Marchesini SPA form Verona; Design for reinforced concrete structures of purification designt for a joint sewage system of Chiampo, Arzignano and Montorso, commissioned by Impresa di Costruzioni Giuseppe Maltauro SPA; Stability verification and design for reinforcement works of hydroelectric designt “Tombetta II” commissioned by AGSM form Verona; most significant recent designs Design of steel and reinforced concrete structures for realization of the new seat of “ Don Milani” Insitute of Commerce located in Rovereto (completed in 1995, total amount is about 17 millions of euro) commissioned by Impresa di costruzioni Pessina spa form Milano; Structural design for enlargement and restoration of “San Lorenzo” Medical Centre situated in Borgo Valsugana (TN) – part 5, general design of Studio Keller (completed, total amount of new building is about 6,7 millions of euro, total amount of existing building is about 8,9 millions of euro), commissioned by Province of Trento; Structural final and construction design for the new seat of Atesina (completed in 2001 total amount of the project is about 13,9 millions of euro, total amount of the structures is about 3,3 millions of euro), commissioned by Rigotti SPA and COS.TRE SRL (Mezzocorona-TN)

    New Trentino Transports Headquarter: general view rendering

  • Studio Modena Ingegneria S.r.l.

    Pag.41/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Structural design for restoration and enlargement of “Codivilla” Hospital situated in Cortina D’Ampezzo (total amount of the first part of the project is about 3,1 millions of euro, completed in 1994), commissioned by dell’Impresa Pivato di Onè from Fonte (TV); Evaluation of the state of degradation and design for restoration of the reinforced concrete elements of sewage treatment designt situated in Peschiera del Garda (in progress) commissioned by Azienda Speciale Consorzio Garda Uno Design of reinforced concrete structures of a polyfunctional building in Trento (35.000 sq.m., total amount about 4 millions of euro, completed in 1997) in seismic zone (s=6), commissioned by Costruzioni Pasqualini from Ala (TN); Design of steel and reinforced concrete structures for enlargement and restoration of medical centre of Rovereto (Province of Trento) – C10 Local Sanitary Unit of Vallagarina district (completed in 1998, total amount is about 2,6 millions of euro), commissioned by Pessina SPA form Milano; Final and construction design for reconstruction of orchestra pit of the roman amphitheatre (Arena) of Verona with the annexed subterranean service rooms (presumed amount is about 640 thousands of euro, in progress), commissioned by Fondazione Arena di Verona; Construction design for a polyfunctional sport centre in Cittadella (PD), commissioned by ARVEST srl (in progress (total amount I 1 million of euro); Construction design for the 400-space underground car park in Cittadella (PD) commissioned by SOGEPA srl from Onè di Fonte (TV), (in progress, total amount is about 5,5, millions of euro);

    Underground car park in Cittadella: view form above rendering

  • Studio Modena Ingegneria S.r.l.

    Pag.42/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Works supervision, preliminary, final and construction design of treatment against degradation of reinforced concrete and structural restoration of two high-rise buildings (I part) and of the subterranean garage (II part), situated in Verona, in Lussino St., commissioned by AGEC Verona (presumed amount is 4 millions of euro);

    High-rise buildings in Lussino St. – works completed

    Final design for structural restoration of the digester covering at “Città di Verona” purification designt (total amount is about 150 thousands of euro), commissioned by A.G.S.M. Verona Structural final and construction design for the new school complex in the district of Monteforte d’Alpone (total amount is about 3,5 millions of euro), commissioned by Town of Monteforte d’Alpone;

    School complex - FEM model

    Structural design for a subterranean reinforced concrete container with regard to the project of optimisation and adjustment of the urban water supply system commissioned by Town of Monteforte d’Alpone; Preliminary, final and construction structural design for the 400-space underground car park in De Lellis St. in Verona, commissioned by SABA Italia from Rome (total amount of structures is about 3,5 millions of euro, completed);

  • Studio Modena Ingegneria S.r.l.

    Pag.43/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    De Lellis underground car park rendering

    Alitalia HeadQuarters at Fiumicino (Rome): final design and construction supervision of the structures of the new headquarters of Alitalia - CAI, architectural design arch. Michele De Lucchi (total amount of work equal to about € 12 million, of which € 4 million for structural works, 2009-2010);

    Photorealistic view of the main entrance

    Entrance Hall – works completed

  • Studio Modena Ingegneria S.r.l.

    Pag.44/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Tassullo production plant in Bolentin (Romania): structural and general design of the new production plant near Bucharest (amount of civil works about € 12 million of which € 3 million for structural works);

    Reconstruction of the Mentor Theatre in Santa Sofia (FC): structural preliminary, final and construction design, architectural arch. Gae Aulenti and arch. Roberto Gherardi (amount of work equal to about € 2 million, of which € 750,000.00 for structural works)

    S. Sofia Theater: view from central square

  • Studio Modena Ingegneria S.r.l.

    Pag.45/45 Via dell'Artigianato, 7 - 37066 Caselle di Sommacampagna (VR) - ITALY - C.F. e P.IVA 03170060234

    Tel (+39) 45 8581711 – Fax (+39) 45 8589182 – e-mail [email protected]

    Expansion of the industrial complex Alenia Aeronautica in Tessera (VE): structural preliminary and final design of a new integrated building (IBS) with adjacent flight training center (FTC) in Alenia Aeronautica of Tessera (Venice), in collaboration with GRISDAINESE + GRIDA