SWT06表紙 - HBL

Switches

SWT06B-02

1

Contents

Contents ................................................................................... 1

Slide Switches

Notice ................................................................................ 2

Product Lineup .................................................................. 3

SMT ................................................................................... 4

DIP .............................................................................. 4 - 5

Tactile Push Switches

Notice ................................................................................ 6

Tactile Push Switch ............................................................ 7

Double Action Type ..................................................... 8 - 10

Double Action Type with Shuttle Switch ........................... 11

Switch Units

Introduction ....................................................................... 12

Product Lineup ................................................................. 13

Snap Plate Variation ......................................................... 14

With EL Illumination .......................................................... 15

Multi-Direction Switches

4 Directions .............................................................. 16 - 17

4 Directions Switch (Slide Operation type with push Switch) ......... 17

High Withstand-load Type ................................................. 18

With Encoder .................................................................... 19

Shuttle Switches

Horizontal Type ................................................................. 20

with Push Switch ...................................................... 20 - 21

Vertical Type ..................................................................... 22

Rotary Switch ................................................................... 22

2

Slide Switches Notice

1. The contents of this catalog are applied to a product

only that is not assembled in a customer's product. Please check and evaluate our product in condition that is assembled in your product before use. The

contents in this catalog are only rough specification. Please request and approve our formal specification

before you use.2. The products are designed and manufactured for

general electronic devices. Please do not use them for such devices (medical devices, security devices or aerospace instruments) that need advanced safety or high reliability.

3. This product is not splash-proof construction, and cannot be washed.

4. Storage Condition(1) This product must be stored in normal temperature

and humidity (5 to 35 degree-C, 45 to 85 %RH, no dew formation).

(2) This product must not be stored in atmosphere where a lot of salinities and sulfides exist. (Must not be stored in salinity density of 1% or more and sulfide of 0.03 ppm or more.)

(3) The product must not be stored with excessive load.

(4) Please use this product as soon as possible within 6 months after delivery.

Notice

3

Slide Switches Product Lineup

Type Position Pole Model No. OperatingForce

TerminalPitch(mm)

Travel(mm) Switching mode

SMT Horizontal 2 1 HSW4512-310011 1.5±1N 2.5 1.5 Non-Shorting

DIP

Horizontal

2 1 HSW2060-210010 2±1.2N 2 2 Not Specified

3 1 HSW2061-010019a , c b 2±1Nb a , c 3±2N

2 2 Not Specified

Vertical 2 1 or 2 HSW0700 Series 3±1.5N 2 2 Not Specified

SMT DIP

Rated 0.1A 12V DC 0.5A 15V DC or 0.3A 30V DC

Contact Resistance 100mΩ max. 30mΩ max.

Insulation Resistance 100MΩ min. at 100V DC 100MΩ min. at 100V DC

Withstanding Voltage 250V AC／ 1 minute 250V AC／ 1 minute

Operating Life 10,000 cycles 10,000 cycles

4

Unit: mm

Slide Switches

0.5 7.1 0.5

2.5 2.5

3-0.5

1.3

3

0.87

0.15

1.9

2.5

0.3

1.3

5

1 0.6 1.

10

.4

∅0.8

Travel : 1.5

4-0

.4

3.4

ma

x.

3

1.2 min. 1.2 min.6.7

2.5 2.5

7-0.8

3

2.6

1.5

min

.1.

8

∅0.85

1 32

PCB Layout (Top View)

1 2 3com

Circuit Diagram

Pole-Position Switching Mode

1P-2T Non-Shorting

HSW4512-310011

SMT

22 2 2

3-∅0.8

2-∅1.212 3

1 2 3com

Circuit Diagram

8.4

4.5

3

2

2

0.8

Travel : 2

3.5

22

.1

2.40.5


1P-2T Not Specified

HSW2060-210010

DIP

Hole Layout (Bottom View)

HSW2060

HSW4512

5

Unit: mm

Slide Switches

3.5

222

.1

2.4

12.4

4.5

3

2

0.80.5

Travel : 2Travel : 2

a b c

2 4 22 2

4-∅0.8

2-∅1.21 2 3 4


com1 2 3 4

Circuit Diagram


1P-3T Not Specified

101

6

Travel : 2

2

58.

53.

53

0.80.5 0.4 0.5

4

R1 R2

2.4

5.5

6-∅0.8

4-∅1.2

2 22.6 2.6

1

6

R1

R2


com

com

1

4 5 6

2 3

R1

R2

Circuit Diagram

Model No. Pole-Position Switching Mode Used Poles

HSW0700-01-019 2P-2TNot Specified

R1 R2

HSW0700-01-039 1P-2T R1

HSW2061-010019

DIP

HSW0700-01-019

DIP

HSW2061

HSW0700

6


1. This product is not the drip proof structure.2. Please don't push the snap plate by anything with

sharp edge such as a needle (Less than a tip ball R1). 3. Please don't push the snapplate directly by fingers.4. Please don't store the product in the atmosphere with

many salt and sulfide.5. This specification is applied to the switch only as a

component. Please confirm and evaluate the switch that is

assembled into your merchandise.6. The storage period must be for six months after your

delivery. (Storage condition:as shown in PACKING drawing)7. Please store the product in normal temperature and

humidity. (temperature : 5 to 35°C,humidity : 45 to 85%RH) because it causes the curve and deformation of the

product in the high temperature and high humidity.

Notice

7

Unit: mm


0.5

3.6

0.55

2.5

4.8

4

5.3

ab

c d

3

2.85

4.85

4.8

a b

c d


a b

c d

Circuit Diagram

7.56.2

50.

7

7 3.9

2.5

0.58

5

3.9

57

6.1

dc

a b


a b

c d

Circuit Diagram

HKW0763-010012

HKW0766-010012

Rated 50mA 5V DC

Contact Resistance 100mΩ max.

Bounce 10msec max.

Operating Life 500,000 cycles

Operating Force 1.6±0.4N

Stroke 0.2±0.1mm

HKW0763

Rated 50mA 5V DC


Bounce 10msec max.

Operating Life 2,000,000 cycles


Stroke 0.25±0.1mm

HKW0766

8

Unit: mm

Double Action Switches

a b

c d

First Action

Second Action

Circuit Diagram

4.4

ab

d

c

(2-R1.2

25)2.55

(4.6)

3.2

2.45 2

0.5

0.6

Prohibitive area for pattern 3.8

a

c d

b

2-0.4

4-0.7

4

pad

pad3.

2

4-0.

70.

41.

32.

7


Rated 50mA 5V DC

Contact Resistance 1Ω max.

Insulation Resistance 100MΩ min.at 100V DC

Withstanding Voltage 100V AC/ 1 minute


HKW0773 Series

Model Number Types Operating Force Stroke

HKW0773-010011 High load type(2nd tier) 1st 0.8N2nd 2.2N

1st 0.17mm2nd 0.35mm

HKW0773-310011 Standard type 1st 0.8N2nd 1.7N


HKW0773-510011 Low load type 1st 0.4N2nd 1.35N


HKW1773-310011 Non click-feeling type(1st tier) 1st 0.5N2nd 1.9N


HKW0773 Series*

*HKW1773： See table.

9

Unit: mm


d c

b a

Full Second Action

Half First Action

Circuit Diagram

Rated 10mA 5V DC max.0.1mA 1V DC min.


Insulation Resistance 100MΩ min. at 100V DC


Stroke First Action 0.32mmSecond Action 0.56mm

Operating Force First Action 0.9NSecond Action 2.2N


1.05

1.812.2

2.832.192.081.05

2.441.75

1.85

64.

764.

58 4.2

3.16 2 4.8 5 6.7

6.9

1

Prohibitive area for PCB solder resist, FPC coerlayer & Cu pattern

GND pad


21.

76 5.6

5.99 6.2

1.9

4.51.632.37

1.1

1.65

0.32

a

bd

c

Rated 50mA 5V DC







a b

c Second Action

First Action

aCircuit Diagrama

73.92.4

7.73.32 GND PAD

2.71

6.9

6.1

5.5

3.3 3.

1 5

cb

a d

Prohibitive areafor pattern


73.15

2.59

0.4(GND)0.285

1.2

Ope

ratin

g st

art P

oint

6.1

1.3

6.48

4-0.55

4-0.

554.

6

b c

（∅3） a a d

∅1 Recommended

operatin

g area.

HKW0820-010011

HKW0730-010011

HKW0730

HKW0820

10

Unit: mm


c b

a d

Second Action

First Action

Circuit Diagram

Rated 50mA 5V DC







4.8

1.18

0.88

2-0.

40.13

1.422.6

5.1

3.2

2-∅0.6

1.5

1.60.67

Prohibitive area for pattern

4-0.50.55

2.81.25

b

a c

d

0.50.85

Gnd Pad

4-0.

6

2-0.

7

2-∅0.7 Hole

(Boss type only)

1.5

2.5

3.3

5.8


Model No. Boss

HKW0731-010011 without boss

HKW0731-210011 with boss

HKW0731-010011

HKW0731

11

Unit: mm

Double Action Switches with Shuttle Switch

1.96

3.38

(8.6)

64.

34.

1

0.4

1.2

0.3

0.9

g c f h i

a

e d

b

2-∅0.7

7.3 9

Prohibitive area for PCB solder resist

GND Pad

(Boss type only)

(Four place) 45° 45°

2.15

4.

5

0.8

6.3


First Action

Second Action

g

i

h

f

Circuit Diagram

CCW CW←→

25° 25°Max. Max.(21.5°) (21.5°)(8° ) (8° )0°

cde

ab

= ON

Shuttle Switch Output Codes















1.951.2

(∅7.

95)

0.15

5.7

3.8

3.65

2.6

1.1

0.5

0.760.25

7.30.4

30°Full stroke

30°Full stroke

Prohibitive area for Cu pattern4.9

C

b

g d e a

f

h

2-∅0.7(Boss type only)

2.7

1.5

3.7

GND Pad(4 places）


CCW CW←→

25° 25°Max. Max.(20°) (20°)(8° ) (8° )0°

c

de

ab

= ON

Shuttle Switch Output Codes

g

h f

First Action

Second Action

aCircuit Diagrama

HXW0840-210011

HXW1774-210011

HXW1774

HXW0840

12

Switch Units Introduction

Unit:mm

Hosiden has 20-years experience of process & assembly technology for Metal Dome (Snap Plate). Hosiden Metal

Dome Assy developed by switch engineering section based on this experience is very suitable for compact

equipment (mobile phone, PDA, etc.)Only by sticking this Metal Dome Assy on PCB (or FPC), which has contact pattern good Tactile feeling & thin type switch Assy can be made.Of course Switch Unit (Metal Dome Assy with PCB or FPC) is also available.

Introduction

Snap Plate●Good tactile feeling by original design.● Stable products with superior material, tooling and

forming technology.● Variation of the snap plate from 3.5mm dia to 6mm

dia. (Standard made) 6, 5.5, 5, 4.5, 4 and 3.5 dia type and Oval shape,

light force type is available.

Others● High accuracy and easy assembly by original process

technology. (Patented and Patent pending.)● Standard color of a tape is white, but another colors

are available on request.● 4 different structures are available as shown next

page.

Features

Recommended Pattern

■ Key pitch 1.0mm min. pitch on either side of A or B is available.

■ Recommended patternIn case that there is the part of drawing line on the single sided printed board, please apply more than double resister coating.Recommended plating : 0.05μm Gold over 2μm Nickel

Plate DiaA

B

Resist

Plate Dia（mm） 6 5.5 5 4.5 4

PCB Pattern

∅1.5 min.

∅7∅4.5 ∅1.5

min.∅6.5∅4 ∅1.5 min.∅

6∅3.5 ∅1.5 min.

∅5.5∅3 ∅1

.5 min.∅

5

∅3

13

Switch Units Product Lineup

● Reel package is available. (Standard Quantity per Reel : 1,000 pcs)

● High accuracy of positioning snap plates eliminates bad feeling due to displacement.

Structures Characteristic

A

Type

1 Layer (Type usually) Delivery form (Sheet / Reel)

● Simple construction

● Better click feeling due to soft tape.

● Circle type or slit for air vent hole is available.

TapeSnap Plate

PCB(FPC)

Hole

Separator

Tape

Separator(Peels off)

B

Type

2 Layer (With spacer) Delivery form (Sheet / Reel)

● Easy to design contact area on PCB.

● Easy to handle due to double layer.

● Circle type or slit for air vent hole is available.

TapeSnap Plate

Spacer

Hole

PCB(FPC)

Separator

Tape Snap Plate

Spacer


C

Type

2 Layer (Sealing up and dustproof type) Delivery form (Sheet / Reel)

● Dust proof type

● No air vent hole on the first layer tape

TapeSnap Plate

Spacer with air

PCB(FPC)

Tape Snap Plate

Spacer


Minute adhesive tape

Each separator is peeled off

D

Type

2 Layer (Not sticking on the substrate side) Delivery form (Sheet / Reel)

● Easy to assemble due to no adhesive type on backside.

Tape

Spacer(Not sticking on the substrate side)

Spacer

PCB(FPC)

Tape Spacer

Separator (Peels off)

Separator

14

Unit: mm

Switch Units Snap Plate Variation

Snap Plate Variation

∅1.5 to ∅1.8Snap Plate

PCB/FPC Contact

Key Top

Tape

Tape : PET 25μm (or 50μm) adhesive 30μm Color white · transparent · black · others

＊ Boss

Structure

Plate Dia.

（mm）Travel

（mm）Height

（mm）Operating Force

（N）Operating Life

（Cycles） Materials

∅6.0

0.21 0.30 1.8 1,000,000 SUS

0.20 0.26 1.7 1,000,000 SUS

0.26 0.26 1.9 500,000 SUS

∅5.50.22 0.28 1.3 1,000,000 SUS

0.22 0.28 1.6 1,000,000 SUS

∅5.00.18 0.23 1.6 1,000,000 SUS

0.19 0.25 1.8 1,000,000 SUS

∅4.5 0.17 0.23 1.5 500,000 SUS

∅4.00.15 0.20 1.5 500,000 SUS

0.17 0.20 1.8 500,000 SUS

5.4× 4.2 0.23 0.30 1.75 500,000 SUS（Oval）

4× 3.1 0.18 0.25 1.8 500,000 SUS（Oval）

3.5× 2.5 0.16 0.21 1.6 500,000 SUS（Oval）

Snap Plate (mm) ＊Boss of Key Top（mm）

∅4 ∅1.5 to ∅1.8

∅5 ∅1.5 to ∅1.8

∅5.5 to ∅6 ∅1.5 to ∅1.8

HKW1116

15

Unit: mm

Switch Units with EL Illumination

EL sheetSnap Plate

PCB/FPC Contact

EL Luminance 65cd/m2 (White)


Thickness 0.38mm ( EL Sheet : 0.1mm )

HKW1540

16

Unit: mm

Multi-Direction Switches (4 Directions)

6.5 64.052.7

4.05

1.2

1

0.85

2.3

11 13.7

4.654

0.5

0.9

2.3

0.8

4

∅0.85

P

2

3

14C


A

D BP

2

3

1

4

CC

PUSH

Circuit Diagram

P

0.9

0.5

31.

2

D

5.5 5A

4.6

0.3

611

.40.

5

0.7

0.6

B

2.53.8

1.1

C

10.6

14

C 2

3

1.4

0.8

0.50.4

1.952.

2

1.1H1 H

2

PUSH

∅3∅2

∅4.

21

Boss

C0.2

4C

3

1P

2

6.81

49.2

1.7

5.86-1 9.

1

7.2


D

A

BPUSH

C

1

P

24

C

3

Circuit Diagram∅2

8.6

1

C

7.51P

2

A

8.6

7.5

D

4

C3

B

2.3

5

2.1

0.8

1.7

∅5.1

PUSH

Model No. H1(mm)

H2(mm) Boss

HXW0768-010071 5.5 2.3 with

HXW0768-010571 5 1.8 with

HXW0768-610071 5.5 2.3 without

HXW0768-610571 5 1.8 without

HXW0767-610021

Rated50mA 20V DC max.

10μA 1V DC min.



Withstanding Voltage 100V AC / 1 minute

Operating Force

X／Y Axis 4-Direction 0.5N to 1.3N

Push Direction 1.7N to 2.9N



10μA 1V DC min.



Withstanding Voltage 100MΩ min. at 100V DC

Operating Force

X／Y Axis 4-Direction 1.3N to 4N

Push Direction 3.5N to 5.5N


HXW0767

HXW0768

*HXW1768 (8-direction type)

17

Unit: mm

Multi-Direction Switches (4 Directions)

9.20.7 1.2

1.05 1.8

8.2

1 p 2

4.5 1

∅0.85

5.84

c4 3


A B

PUSH

D C

3c4

2p1

Circuit Diagram

1

c4

p

3

2

0.8

1.6

2

1

6.3 0.6

∅0.8

0.8

4

∅1

0.5 0.5

22

5

6.5

B

C

PUSH

A

D

(0.7) (0.7)

4-R0.2

9.3

4-1.6

2-3

9.3

2-0.

5

2

（Slide stroke）（at push operation）

9.9

9.9

1.5

1.5

∅1.5

1.25

0.55

(3.55)

(3.8)

1

2

4

37

6

5

109

8

2-∅0.8

2-∅0.9(holes)

(Cover)

61.6 12

12

10-0

.9

0.9

0.9

(Cover)1.6

7

8

78911.3

2.2

2.2

1

2

4

376

5

109

8


8

7

5 4

3

2

1

6

109

Circuit Diagram

Rated 50mA 5V DC max.

10μA 1V DC min.




Operating Force

X／Y Axis 4-Direction 1.2+ 1.0- 0.7N

Push Direction 2.2+ 1.4- 1.1

N


Rated 1mA 10V DC






HXW0801-010031

TWK7018-0110109

TWK7018 Slide Operation Type

HXW0801

18

Multi-Direction Switches (High Withstand load Type)

Unit:mm

13.7

5.45

3 0.5

2.5

0.8 ∅1.5

6

∅1

3.5

5.8

12.8

11 11 14.3

14.15

1

3.75

3.5

3.45

∅3.5

5

6

1

2

3

C

4

8

7

P

A

B

C

D

E

PUSH

F

H

G

∅1.05

6

4.5

3

10-1.6

11.8

10-1

.22.

7

4 9.6

13.1

2-1.

35

∅1.55

8

7P

65

3C4

1

2


8 H

A

B

C

D

E

ComF

G PUSHPush

7

6

5

3

4

1

2

Circuit Diagram


1mA 1V DC min.




Operating Force

4 or 8 Directions 2±0.5N

Push Direction 4.5±1N

Operating Life 1,000,000 cycles

Withstand load

Push Direction 400 N

Model No. Operation Function

HXW0805-01 8 Directions (A to H) ＋ Center Push

HXW0805-31 4 Directions (A・C・E・G)＋Center Push

HXW0805-01

HXW0805

19

Multi-Direction Switches (With Encoder)

Unit:mm

HXW1723-210010

18.2

∅16.3

9-0.159-0.8

Terminal reinforcing rib(9 places)

∅2.5

∅7.25

5

(7.15)

17.5

∅17.8

17.5

17.4

3.2

1.2

10.2

5

1.9

1

1

2.65

1.82

9゜9゜

(∅2.

5)

A

B

C

D

Push

Phase A Phase B

Encoder, Push Com

4-direction Com

17

4

4

17

3.1

D

A B

C

9-∅1

∅1.15

(Boss Hole)

OFF ON OFF ON

CCW CW

（14pulses,28detents/rotation）

Phase A

Phase B12.86°

Click position

Output signal of the encoder

4 Directions＋Push

Encoder

Rated 10mA 5V DC

Number of Pulses 14

Number of clicks 28

Torque 11.5±4.5mN・m

Operating Life （1Cycle：360°both ways）15,000 cycles

Rated 10mA 5V DC

Contact Resistance 200m Ω max.

Push Direction


Stroke 0.39±0.18mm

4 DirectionsOperating Force 3.6±1.0N（1.5mm from tip）

Operating Range 9°max.

Operating Force

Direction 100,000 cycles

4-Directions 100,000 cycles


HXW1723

20

Unit: mm

Shuttle Switches

HOSIDEN

1.8 0.3

(20 ) (20 )

R5.9

CWCCW

∅0.

7510.

83.

4

2.3

2.45

0.6

0.64

8.5

1.2

0.8

R5.6

0.8 8.81.

5

7.4

1.52.25

2

0.5

3.5

c

1 2

10.48.6

7.2

6 ∅0.85

Copper pad shall not exist in this area.

2

earth pattern

1.7

1.7

22.

45

1

2.2

28.3

earth pattern

1.15 1.4

4

2.15

2.05

C

1 2


OFFON

OFFON

(20°) (20°)(10°)(10°) (0°)

CCW CW

1c -

2c -

Ter

min

al N

o.

Output Codes


0.1mA 1V DC min.

Output Voltage 1V max. at 1mA 5V DC



Operating Force 0.5 + 0.3- 0.2

N


OFF

CCW CW

Term

inal

No.

(22.5 ) (18 ) (9 ) (0 ) (9 ) (18 )(22.5 )

ONOFFONOFFONOFFON

c - 1c - 2c - 3

c - 4

Output Codes

PUSH

Circuit DiagramPush Direction

C1 423 P

0.6 1.511

11.8

CWCCW PUSH

R7.

52.2

11.4 9.

5

R7.2

0.3

max

.

Earth Terminal

3.9

4.9

(0.6

)(0

.8)

Full StrokeOn Stroke

2.5 0.4

∅1

0.5 max. 2.8 0.6

4

Lever

(22.5°) (22.5°)

62

R6.4R7.5

11.4

9.5

0.8 1.35

HXW0780

Model No. Lever Color

HXW0780-010031 Dark gray

HXW0780-010041 Black


0.1mA 1V DC min.




Operating Force

Shuttle Direction 0.65±0.3N

Push Direction 2±1N


HXW0785-010031Non-actuator


2.6

100°

9.612.2

∅1.1

11.710

2.9

4.51

1.8

0.8

1

43.

2

5

1.2

P=1.51 3 2 4 CP

※ Do not use the portion of except for the earth pattern layout.

HXW0783-510011

HXW0783

HXW0780／ HXW0785 with Push Switch

21

Shuttle Switches

Unit:mm

(20 ) (20 )(15.5 ) (15.5 )(0 )

1c -

2c -

Terminal No.

CCW CW

Switching sequence ( =ON)

Output Codes

PUSH

c p

CCW

PUSH

CW

(20 ) (20 )

(7.4R

AD)

6.2RAD

5.6RAD

(2)

2

4-1

5.9

p

21

c

9.5

(0.5

5)O

n st

roke

(0.8

)Pus

h st

roke

9.25

5.9

3.35

1.85

1.6

0.3 max.(Frame stroke)

P.C.BoardMounting face

1.2

1.65

0.35

100

5.33.2

0.8

11.18.17.4

1.35

0.6

2.7

2.75

1.45 0.6

0.96 2.8

1.55

0.45

5.25

0.6

4.2

p2

1 c

earthpattern

earthpattern



0.1mA 1V DC min.




Operating Force

Shuttle Direction 0.65±0.3N

Push Direction 2±1N


HXW0786-010011

HXW0786 with Push Switch

22

Unit: mm

Shuttle Switches

2-∅1

17.5121.94.2

13.4

94.2

1.6

3.4 8.

51.

82

4.51.

41.

4

3.5

3.2 0.6

2.5

1.410

15.5

a

f f

b

PC


15° 15° 15° 15°

−OFF

−ON

OFF

ONC a

C b

CCW24Click / 1Rotation

CW←→

aRotary Switch Output Codesa

C P

PUSH

aCircuit Diagrama

Rated 1mA 5V DC5mA 5V DC


Push Direction

Operating Force 3±1.5N

Stroke 0.5±0.15mm


Rotary Direction

Rotation torque 2 to 8mN∙m

Number of Click 24 click / 1 Rotation


2.51.05

0.50.

256 2.4

0.8

3.8 3

0.6

1.25

1.1

11.6

CW

1.65

0.55

CCW

PUSH

0.6

0.5

2.3

4.4

3.8

21.7

2 2 4.6

0.9

1.4

0.8 7.87 1.6

0.81.1

2-∅0.85a

cb

P


CCW CW←→

= ON

(19°) (19°)(12°) (12°)0°c

ab

aShuttle Switch Output Codesa

C P

PUSH

aCircuit Diagrama

Rated 0.1mA 5V DC5mA 5V DC


Push Direction

Operating Force 2.6±1N

Stroke 0.2+ 0.15- 0.1 mm


Rotary Direction

Operating Force 1±0.4N

Operating Range 19±3°


HXW0741

CWCCWPush

∅17

∅15.8

∅11.8 2.75 0.7

0.5

HXW0741-010011

HXW0735-210011

HXW0735 Rotary Switch

SWT06

CAUTION FOR SAFETY

Please use our products properly based on our Drawing and Specification.

SwitchesB-02

Printed in Japan 2013. 02 H 26

Hong Kong Hong Kong Hosiden Ltd.Units 1101-02, 11/F., Stelux House, 698 Prince Edward Road East, San Po Kong, Kowloon, Hong KongPhone : +852-23238181 Fax : +852-23520425

Taiwan Taiwan Hosiden Co., Ltd.7F., No.237, Songjiang Road., Zhongshan Dist., Taipei City 104, TaiwanPhone : +886-2-2503-5611 Fax : +886-2-2517-8573

Thailand Hosiden (Thailand) Co., Ltd.889 THAI CC TOWER, 21 Floor, Room 212, South Sathorn Road,.Kwaeng Yannawa, Khet Sathorn, Bangkok 10120, ThailandPhone : +66-2-673-9760, 9761 Fax : +66-2-673-9762

Hosiden Electronics(Shanghai) Co., Ltd.ChinaRoom 802,Kirin Plaza,No.666 Gu Bei Road,Changning District,Shanghai P.R.ChinaPhone : +86-21-5208-1488 Fax : +86-21-5208-1480Hosiden (Shenzhen) Co., Ltd.Room2716, Changping Commercial Building, 99 Honghua Road, Futian Free Trade Zone, Shenzhen, ChinaPhone : +86-755-8348-0952 Fax : +86-755-8359-7722

Singapore Hosiden Singapore Pte. Ltd.28, Genting, Lane, #04-07, Platinum 28, Singapore 349585Phone : +65-6296-8100 Fax : +65-6296-8200

Malaysia Hosiden Corporation(M)Sdn. Bhd.Lot1,Jalan P/1A,Bangi,Industrial Estate,43650Bander Baru Bangi, Selangor Darul Ehsan,MalaysiaPhone : +60-3-8925-8655 Fax : +60-3-8926-6122

France Branch office Paris13, rue Camille Desmoulins 92441 Issy Les Moulineaux, FrancePhone : +33-1-5804-2484 Fax : +33-1-5804-2300

U.K. Hosiden Besson Ltd.12 St. Joseph's Trading Estate St. Joseph's Close, Hove, East Sussex,BN3 7EZ, United KingdomPhone : +44-1273-860000 Fax : +44-1273-777501

U.S.A. Hosiden America Corp.

Head Office120 East State Parkway, Schaumburg, IL, 60173, U.S.A.Phone : +1-847-885-8870 Fax : +1-847-885-0063

San Jose Sales Office550 South Winchester Boulevard, Suite 320, San Jose, CA 95128, U.S.A.Phone : +1-408-985-8780 Fax : +1-408-985-8785

Detroit Sales Office28970 Cabot Drive, Suite 600, Novi, MI 48377, U.S.A.Phone : +1-248-489-0174 Fax : +1-248-489-1154

GermanyHead OfficeGraf-Recke-Straße 82, 40239 Düsseldorf, GermanyPhone : +49-211-96493-0 Fax : +49-211-96493-90

Hosiden Europe GmbH

Head Office 4-33, Kitakyuhoji 1-chome, Yao-city, Osaka 581-0071, JapanPhone : +81-72-993-1010　　Fax : +81-72-994-5101

Japan

4-33, Kitakyuhoji 1-chome, Yao-city, Osaka 581-0071, JapanPhone : +81-72-993-1010 Fax : +81-72-924-8937

Overseas Division :

http://www.hosiden.com

・ The contents described in this catalog may be changed without prior notice due to products improvements or discontinuance of production.・ Every product in this catalog is compliant to RoHS directive.

■ Model No. Table

H K W 0 7 3 0 9

H K W 0 7 3 1 10

H K W 0 7 6 3 7

H K W 0 7 6 6 7

H K W 0 7 7 3 8

H K W 0 8 2 0 9

H K W 1 1 1 6 14

H K W 1 5 4 0 15

H K W 1 7 7 3 8

H S W 0 7 0 0 5

H S W 2 0 6 0 4

H S W 2 0 6 1 5

H S W 4 5 1 2 4

H X W 0 7 3 5 22

H X W 0 7 4 1 22

H X W 0 7 6 7 16

H X W 0 7 6 8 16

H X W 0 7 8 0 20

H X W 0 7 8 3 20

H X W 0 7 8 5 20

H X W 0 7 8 6 21

H X W 0 8 0 1 17

H X W 0 8 0 5 18

H X W 0 8 4 0 11

H X W 1 7 2 3 19

H X W 1 7 6 8 16

H X W 1 7 7 4 11

T W K 7 0 1 8 17

Model No. Page

Documents

SWT06表紙 - HBL