7/28/2019 taig

1/1

4-1/2 swing 9-3/4 centers 15-1/2 bed 9 carriage travel

1-3/4 cross slide travel

Micro Lathe Basic Unit, factoryassembled with toolpost & carriage

depth stop, 15 bed (motor, pulleys,tailstock not included). Machined,

ground, stabilized steel bed with life-time ball bearing spindle.#TL1017 Price $191.50

With optional accessories shown:#T1050 3-jaw chuck ($64.10)#T1150 tailstock ($39.50)#T1092 drill chuck ($10.80)

#T1021W motor ($106.40)#T1161 pulleys ($25.80)

Package #T1 List $438.10SALE PRICE $399.95

Save $38.15

TAIG MICRO MILL

TAIG MICRO LATHE

A2Z CNC End Mill HoldersEMHT500 1/2 $18.50EMHT375 3/8 $18.50EMHT250 1/4 $18.50EMHT125 1/8 $18.50

TAIG TOOLS

#T2018 Mill onlyPrice $718.00

The Micro Millhas an effortless,chatterless tableand mill-headmovement.

ACCESSORIES FOR LATHE AND MILL

Part# Description Price

T1020A WW headstock assembly $104.30

T1021W Motor, 115 v, 1/4 HP, switch & cord 106.40

T1030 4-jaw ind. chuck reversible jaws 64.75

T1035 Face plate 3-1/4, 3/4-16 thread 14.90

T1036 Face plate angle bracket set 5.80T1037 Face plate, 2 dia. (wood turners) 8.10

T1040 Collet set, collet closer w/8 collets 30.80

T1041C 3/16 collet 4.50

T1041E 1/4 collet 4.50

T1042 Collet closer 5.90

T1043 Set of 4 blank collets 2.90

T1050 3-jaw chuck, 3-1/4 dia. self-centering 64.10

T1051 Blank soft jaw set 9.00

T1060 4-jaw chuck, 3-1/4 dia.self-centering 72.40

T1092 1/16-3/8 Jacobs drill chuck 10.80

T1093 1/8-1/2 Jacobs drill chuck 15.70

T1130 Blank arbor 1 dia.,screws on spindle 4.15

T1140 Drill chuck arbor 11.10

T1150 Drilling tailstock, lever operated 39.50

T1151 Needle bearing center, spring loaded 16.70

T1159 Spare polyurethane v-belt #3M 315 8.10

T1160 Spare polyurethane v-belt #3M 500 8.10

T1161 6 step pulley set, 3/8 motor shaft w/belt 25.80

T1170 Extra tool post 4.70

T1190 Steady rest 3/32 to 1-1/2 capacity 25.30

T1200 Top slide, mounts on cross slide 44.80

T1210 Radius turner, swings tool bit in arc 20.10

T1221 3/4-16 chuck adapter 14.60

T1224 Fly cutter, 1-1/4 to 2-1/2 diameter 20.00

T1225 Milling vise for lathe, 2.125 x 2 wide 27.80T2225 Milling vise for mill, 2.125 x 2 wide 31.75

T1250 Riser block kit for headstock&toolpost 25.40

T1251 Tailstock riser only 21.10

NEW! Quick ChangeToolpost with 4 holders

(by A2Z CNC)#QCTPT1 $77.50

#T2018S Mill Packagewith #T2225 vise, #T1042 colletcloser, #T1041C 3/16 collet,

and #T1041E 1/4 colletList Price $764.65

SALE PRICE $699.95Save $64.70

FOR MORE INFORMATION OR TO PLACE AN ORDER CALL TOLL FREE 800-872-6500PAGE 42