LTM1080/1

Technical DataCaractéristiques techniques

Mobile CraneGrue automotrice

Telescopic boom

Flèche télescopique

157 ft

LTM1080/1

910111213141516171820222426283032343638404550556065707580859095

100105110115120125130135140

910111213141516171820222426283032343638404550556065707580859095

100105110115120125130135140

183169158148139131124117111105948577.571

14914113312612011410910499.590.58376.570

1481401331261201141091049990837669.56458.654.250.246.442.7

13713112612111611110610297.5898275686256.351.447.44440.537.431.1

1101071041019895.59387.580.5736558.953.348.84541.738.435.429.825.221.2

8481.579.577.573.569.5666256.951.647.343.740.537.434.529.124.72118.917.415.9

6765.56360.558.155.753.150.146.342.939.936.934.228.924.621.118.215.414.112.9

54.552.450.448.446.644.943.14138.736.434.12924.921.418.61715.814.412.911.410.2

43.542.24139.838.837.43634.532.928.524.621.318.516.214.313.312.411.71110.29.5

35.534.533.532.631.630.729.827.424.621.81916.814.913.111.510.810.29.58.88.17.4

30.329.628.928.227.526.926.224.122.320.61916.81513.312.311.510.39.38.47.66.96.35.8

2625.62524.323.62321.219.718.317.115.914.813.612.210.69.58.57.66.96.25.654.54.13.7

20.920.52019.51918.617.516.415.414.413.512.81211.310.59.48.47.56.76.15.54.94.443.63.2

35 ft*

47 ft 58 ft 69 ft 80 ft 92 ft 103 ft 114 ft 125 ft 136 ft 148 ft 157 ft

35 ft – 157 ft 360° 35500 lbs

Lifting capacities on telescopic boom.Forces de levage à la flèche télescopique.

00000

0/ 046/ 00/ 0

0/460/ 0

46/ 0/ 046 / 0

0/ 0

0/46/92

/ 00/0/46/ 0

92/ 0/ 046 / 0

0/ 0

0/46/92

/ 00/0/92/46

92/ 0/ 092 / 0

/ 0

0/46/92

/ 00/920/46/92

92/ 0/ 092 / 046 /46

0/46/92

/ 0/92

0/92/92

92/ 0/ 092 / 046 /9246/460/46/92

/92/92

/92

92/ 0/ 092 /4692 /9246/920/46/92

/92/92

/92

92/ 0929246/9246/92

/92/92

92/46929292/9246/92

/92/92

9292929292

100100100100100TAB 106139/106145* over rear / en arrière

IIIIIIIVV

IIIIIIIVV

2

The tabulated lifting capacities do not exceed 85% of the tippingload.The crane's structural steelwork is in accordance with DIN 15018,part 3. Design and construction of the crane comply withDIN 15018, part 2, and with F.E.M. regulations.The 85% overturning limit values take into account wind force 5= wind speed 20 mph.Lifting capacities are given in kips.The weight of the hook blocks and hooks must be deducted fromthe lifting capacities.Working radii are measured from the slewing centreline.The lifting capacities given for the telescopic boom only apply ifthe folding jib is taken off.Lifting capacities are subject to modifications.Lifting capacities above 128 kips / 172 kips only with additionalpulley block / special equipement.

Les forces de levage indiquées ne dépassent pas 85% de la chargede basculement.La norme DIN 15018, 3ème partie est appliquée pour les charpentes.La construction de la grue est réalisée conformément à la normeDIN 15018, 2ème partie, et aux règles de la F. E. M.A 85% de la charge de basculement, il a été tenu compte d'un ventde force 5 = vitesse de vent 20 mph.Les forces de levage sont données en kips.Les poids des moufles et crochets doit

Les portées sont calculées à partir de l'axe de rotation.Les forces indiquées pour la flèche télescopique s'entendent fléchettedépliable déposée.Les forces de levage sont modifiables sans préavis.Forces de levage plus de 128 kips / 172 kips seulement avec unmoufle complémentaire / équipement supplémentaire.

être soustrait des chargesindiquées.

Remarks referring to load charts. Remarques relatives aux tableaux des charges.1.

2.

3.

4.5.

6.7.

8.9.

1.

2.

3.

4.5.

6.7.

8.9.

% %

ft ft

85%

Lifting capacities are givenin kips (1,000 lbs).

LTM1080/1

10111213141516171820222426283032343638404550556065707580859095

100105110115120

10111213141516171820222426283032343638404550556065707580859095

100105110115120

1341271201131081029792887971.56456.7

13412712011310710296.59287.578.57163.556.6504439.937.334.231.1

124119114110

10195.590.585.57666.558.451.846.641.837.834.331.127.925.121.6

105

99.59794.591.58985807061.554.548.543.53935.332.229.526.924.519.717.415.8

76747270.56658.55246.441.837.53431.128.627.125.8232017.214.712.711.1

6159.657.154.350.24540.636.633.330.628.225.823.620.318.116.41513.112.110.9

49.647.645.643.639.83632.930.32826.425.222.219.216.514.212.611.710.69.38.47.5

39.538.436.935.132.129.727.525.323.320.818.716.614.913.511.810.398.17.36.55.8

32.331.430.52927.225.323.619.917.415.914.412.9119.58.47.46.65.95.34.74.1

27.626.926.325.624.924.223.319.717.9161412.210.59.1876.25.54.94.33.83.32.9

23.623.222.722.121.520.919.31714.812.911.29.68.37.26.35.54.84.13.63.12.62.2

1918.618.217.717.316.915.914.913.812.6119.58.27.16.15.44.743.532.52.1

35 ft 47 ft 58 ft 69 ft 80 ft 92 ft 103 ft 114 ft 125 ft 136 ft 148 ft 157 ft

35 ft – 157 ft 360° 18740 lbs

00000

0/ 046/ 00/ 0

0/460/ 0

46/ 0/ 046 / 0

0/ 0

0/46/92

/ 00/0/46/ 0

92/ 0/ 046 / 0

0/ 0

0/46/92

/ 00/0/92/46

92/ 0/ 092 / 0

/ 0

0/46/92

/ 00/920/46/92

92/ 0/ 092 / 046 /46

0/46/92

/ 0/92

0/92/92

92/ 0/ 092 / 046 /9246/460/46/92

/92/92

/92

92/ 0/ 092 /4692 /9246/920/46/92

/92/92

/92

92/ 0929246/9246/92

/92/92

92/46929292/9246/92

/92/92

9292929292

100100100100100

TAB 106142

IIIIIIIVV

IIIIIIIVV

3

% %

ft ft

85%

Les forces de levage sont donnéesen kips (1,000 lbs).

Lifting capacities on telescopic boom.Forces de levage à la flèche télescopique.

LTM1080/1

4

101112131415161718202224262830323436384045

101112131415161718202224262830323436384045

39.636.934.532.230.328.426.825.323.921.319.117.215.5

37.835.232.930.728.82725.42422.720.118.116.214.6

4138.43633.831.83028.326.825.522.920.718.817.115.614.313.11211.110.2

39.336.734.432.330.428.62725.624.321.719.717.816.114.713.412.311.310.49.5

41.839.236.834.632.630.829.227.726.323.721.619.71816.515.11412.9121110.28.4

40.137.535.233.131.229.427.826.425.122.620.518.71715.614.313.212.211.310.39.57.8

1) 1) 1)2) 2) 2)

35 ft 47 ft 58 ft

00000

0/ 046/ 00/ 00/ 00/46

46/ 0/ 046/ 0/ 00/ 0/ 00/46/ 00/46/92

TAB 106189 / 106191

IIIIIIIVV

IIIIIIIVV% %

ft ft

35 ft – 58 ft 0°35500 lbs18740 lbs

1)

2)

Lifting capacities on telescopic boom.Forces de levage à la flèche télescopique.

85%

LTM1080/1

5

Lifting heights.Hauteurs de levage.

34 ft

6

125 ft – 157 ft 34 ft – 62 ft 360° 35500 lbs

Lifting capacities on the folding jib.Forces de levage à la fléchette pliante.

LTM1080/1

343638404550556065707580859095

100105110115120125130135140145150155160165170175180

343638404550556065707580859095

100105110115120125130135140145150155160165170175180

2120.720.520.319.317.916.615.414.413.412.411.410.1987.26.45.95.65.354.74.54.13.83.4

15.515.114.613.91312.111.310.59.68.77.76.96.25.85.45.14.84.54.2

13.313.112.912.712.211.410.7109.18.27.36.55.8

8.187.87.67.37.176.86.66.56.36.265.85.65.55.14.64.23.93.73.53.33.12.92.72.62.3

6.26.15.95.85.75.65.55.45.35.25.154.94.94.84.43.93.63.43.232.82.6

5.154.94.94.84.84.84.74.74.64.64.64.64.3

16.815.915.114.313.412.611.81110.39.68.98.17.26.66.35.95.44.94.443.63.32.92.6

13.612.912.211.510.910.39.89.48.98.58.17.77.26.65.95.34.74.23.73.32.92.62.21.91.5

9.99.79.49.18.78.387.77.476.76.46.15.85.65.14.543.63.12.82.42.11.7

13.412.812.211.61110.510.19.79.18.57.86.96.365.75.24.74.33.83.43.1

10.910.49.99.498.68.27.97.67.376.76.35.75.14.64.13.63.22.82.52.11.7

8.88.58.27.97.67.47.16.86.56.265.75.454.43.93.53.12.72.321.7

12.111.51110.510.19.79.398.68.17.36.66.15.8

9.59.18.78.387.77.47.16.96.66.565.44.84.33.8

8.48.17.97.67.37.16.96.76.46.15.85.65.24.74.23.73.2

7.276.96.76.66.56.36.26.165.95.85.75.55.14.64.34.13.93.63.332.72.42.11.81.6

6.56.46.46.36.26.15.95.85.75.55.35.14.94.74.54.44.13.73.332.62.321.71.5

5.85.95.95.85.65.45.35.14.94.84.64.54.44.243.93.73.53.12.82.42.11.81.61.3

5.95.85.75.65.55.45.35.25.154.94.94.84.84.74.33.93.73.63.332.72.42.1

5.35.25.15.154.94.94.84.74.54.44.24.13.93.83.53.22.82.52.21.91.6

54.94.94.84.84.74.54.44.34.243.93.83.73.53.432.72.321.71.4

4.94.94.84.84.84.74.74.64.64.64.64.54.23.93.73.5

4.64.64.64.54.54.54.54.44.34.24.143.93.83.53.12.8

4.34.34.34.24.24.24.24.14.13.93.83.73.63.43.232.72.32

0° 0° 0° 0° 0°0° 0° 0°20° 20° 20° 20° 20°20° 20° 20°34 ft 62 ft 62 ft 62 ft 62 ft

125 ft

40° 40° 40° 40° 40°40° 40° 40°34 ft

136 ft

34 ft

148 ft 157 ft

92/ 092/9292/9246/9246/92

92/469292/929246/92

/92

/92

929292

9292

100100100100100

TAB 106161 / 106167 / 106173

IIIIIIIVV

IIIIIIIVV% %

ft ft

85%

34 ft

LTM1080/1

125 ft – 157 ft 34 ft – 62 ft 360° 18740 lbs

343638404550556065707580859095

100105110115120125130135140145150155

343638404550556065707580859095

100105110115120125130135140145150155

1918.918.718.417.515.713.711.910.398.37.87.36.55.85.14.543.53.12.72.31.91.6

14.113.713.111.4108.77.66.96.66.25.64.94.43.93.432.52.11.8

12.111.911.710.79.58.37.26.56.35.95.24.64.1

7.47.37.16.96.76.56.36.265.95.554.74.54.343.53.12.82.42.11.81.5

5.65.55.45.35.25.154.94.84.74.243.83.73.32.92.62.21.91.6

4.64.64.54.54.44.44.34.34.13.83.73.63.32.9

15.214.413.712.811.710.28.98.47.76.865.24.643.532.62.21.91.5

12.411.711.110.59.99.48.77.86.85.95.24.53.83.22.72.31.8

98.98.68.27.97.67.376.65.74.94.23.632.52.1

12.211.61110.59.78.77.67.26.55.85.14.53.93.432.52.21.8

9.99.498.68.27.87.46.75.95.14.43.83.32.82.31.81.4

87.77.57.26.96.76.45.74.94.23.63.12.62.1

1110.4109.698.37.26.76.25.54.84.23.73.2

8.78.27.97.67.376.35.64.94.23.63.12.62.11.7

7.77.47.16.96.76.56.15.54.74.13.532.521.5

6.66.46.26.165.95.85.65.454.74.543.532.62.31.91.6

5.95.85.85.75.65.55.45.35.24.84.33.73.22.72.31.91.5

5.35.35.45.35.14.94.84.64.54.343.532.52.1

5.35.25.25.154.94.84.74.64.64.243.83.32.92.52.21.91.5

4.84.84.74.64.54.54.44.44.13.73.22.72.31.91.5

4.54.54.44.44.34.34.143.93.532.52.11.7

4.54.44.44.34.34.34.24.13.93.73.432.62.21.91.5

4.24.24.14.14.14.14.143.83.32.92.52.1

3.93.93.93.93.83.83.83.83.63.22.82.31.9

0° 0° 0° 0° 0°0° 0° 0°20° 20° 20° 20° 20°20° 20° 20°34 ft 62 ft 62 ft 62 ft 62 ft

125 ft

40° 40° 40° 40° 40°40° 40° 40°34 ft

136 ft

34 ft

148 ft 157 ft

92/ 092/9292/9246/9246/92

92/469292/929246/92

/92

/92

929292

9292

100100100100100

TAB 106158 / 106164 / 106170

IIIIIIIVV

IIIIIIIVV% %

ft ft

7

85%

Lifting capacities on the folding jib.Forces de levage à la fléchette pliante.

LTM1080/1

12'8"16.00 R 25 12'4" 7'7" 9' 9'6" 12'8" 13 "1/3 15 "1/3 19° 16° 23° 16°

A A B C D E F G α α1 b b1

* lowered / abaissé

R = All-wheel steeringDirection toutes roues

1

Dimensions / Encombrement

**

** with folding jib / avec fléchette pliante

8

Dimensions.Encombrement.

LTM1080/1

26400 26400 26400 26400 1056001)lbs

1 2 3 4

1) with 18740 lbs counterweight / avec contrepoids 18740 lbs

AxleEssieu

DriveMécanismes

infinitely variableen continu

Rope diameter / Rope lengthDiamètre du câble / Longueur du câble

Max. single line pullEffort au brin maxi.

ft/min single lineft/min au brin simple

ft/min single lineft/min au brin simple

approx. 48 seconds to reach 83° boom angleenv. 48 s jusqu’à 83°

approx. 240 seconds for boom extension from 35 ft – 157 ftenv. 240 s pour passer de 35 ft – 157 ft

Total weightPoids total

9

Weights.Poids.

Working speeds.Vitesses.

1

360°

2

%

mph

mph

950730880520240

176128843512.5

1410731

35 %

60 %

7531–

0 – 426 2/ " / 820'3 12800 lbs

0 – 426 2/ " / 690'3 12800 lbs

0 – 2.0 rpm

6.0

3.9

9.2

6

14.4

9.3

22.4

14.5

32.9

21.2

49.7

33

6

3.9

14

6

.4

1 2 3 4 5 6 R1 R2

Load (kips)Forces de levage kips

No. of sheavesPoulies

No. of linesBrins

Weight lbsPoids lbs

16.00 R 25

10

Folding jib:2nd hoist gear:Additionalcounterweight:Drive 8 x 8:

Other equipments available on request.

34 ft – 62 ft long, for mounting on telescopic boom at 0°, 20° and 40°.For two-hook operation, or with folding jib in case main hoist shall remain reeved.

Axle 2 additionally driven.

Frame:

Outriggers:Engine:

Transmission:

Axles:Suspension:Tyres:Steering:

Brakes:

Driving cab:

Electrical system:

Liebherr designed and manufactured, box-type, torsion resistant design of high-tensile fine grained structural steel.4-point support, all-hydraulic horizontal and vertical operation.

ZF power shift gear, with torque converter, lock-up and integrated off-road ratio,additional activation of front wheel drive, 6 forwards and 2 reverse speeds.All axles steered. Axles 1, 3 and 4 with planetary gears and differential locks.All axles with hydropneumatic suspension and hydraulic locking facility.8 tyres. Tyre size: 16.00 R 25.Front axles mechanically steered, with hydraulic power assistance and stand-bysteering pump. Rear axles hydraulically steered. All axles steered hydrostaticallyfrom crane cab. Steering acc. to EC directive 70/311/EEC.Service brake: All-wheel servo-air brake, dual circuit system.Hand brake: Spring-loaded, acting on all wheels of axles 2, 3 and 4.Sustained-action brake: Exhaust retarder with additional Liebherr braking systemBrakes acc. to EC directive 71/320/EEC.Two-men driving cab, steel sheet design, with dipping varnish and powder coating.With control elements and instruments for driving.Control of the electrical and electronical components by modern data bus technique.24 Volt DC, 2 batteries, lighting according to traffic regulations.

6-cylinder Diesel engine, make Liebherr, type D 9406 TI-E, watercooled, 320 kW(435 HP) at 2100 min acc. to ECE-R 24.03 and 2001/27/EG (Euro 3), max. torque1900 Nm at 1100 – 1400 min , engine management with Liebherr data bus.Fuel tank: 400 l.

16760 lbs for a total counterweight of 35500 lbs.

Crane carrier.

Frame:

Crane drive:

Crane control:

Hoist gear:

Luffing gear:Slewing gear:

Crane cab:

Safety devices:

Telescopic boom:

Counterweight:Electric system:

Liebherr-made torsion resistant, welded construction of high-tensile structural steel,linked to carrier by a three-row roller slewing ring for 360° continuous rotation.

By 2 control levers (joystick type) and by electronic speed variation of Diesel engine,electric pilot control with stepless control of all crane motions. Liebherr data bustechnique for data transfer.Axial piston fixed displacement motor, hoist drum with integrated planetary gear andspring-loaded static brake, actuation by open oil circuit.1 differential ram with pilot operated brake valve.Hydraulic motor, planetary gear with spring-loaded static brake, actuation by open oilcircuit. Continuous control of slewing speed.All-steel construction, fully galvanized, with safety glass, heater, operating andcontrol elements. Cab tiltable backwards.LICCON safe load indicator, hoist limit switch, safety valves against rupture of pipesand hoses.Buckling resistant and torsion-proof design of high tensile steel with oviform boomprofile, 1 base section and 5 telescopic sections. All telescopic sections extendablehydraulically and independently from one another. Rapid-cycle telescoping system“TELEMATIK”. Boom length: 35 ft – 157 ft.18740 lbs basic counterweight.Control of the electrical and electronical components by modern data bus technique.

Diesel-hydraulic with 1 double axial piston variable displacement pump with automaticcapacity control, 1 double gear pump, driven by the carrier Diesel engine, open oilcircuits with electrically controlled “load sensing”, operation of 4 movementssimultaneously.

Crane superstructure.

Complementary equipment.

-1

-1

LTM1080/1

LTM1080/1

11

Fléchette pliante:Deuxième treuil:Contrepoidscomplémentaire:Entraînement 8 x 8:

Autres équipements supplémentaires sur demande.

34 ft à 62 ft de long, pour montage à la flèche télescopique à 0°, 20° ou 40°.Pour le levage avec 2 crochets ou pour le travail avec fléchette pliante lorsque le câblede levage principale reste mouflé.

Essieu 2 est entraîné additionnellement.

Châssis:

Stabilisateurs:Moteur:

Boîte de vitesse:

Essieux:

Suspension:Pneumatiques:Direction:

Freins:

Cabine:

Installation électrique:

Fabrication Liebherr, construction en caisson indéformable, en acier à haute résistanceà grains fins.Calage en 4 points, à telescopage horizontal et vérinage entièrement hydrauliques.

ZF à changement de rapports en charge avec convertisseur de couple, lock-up etétage gamme terrain integré et actionnement additionnel de l’entraînement del’essieu avant. 6 rapports avants et 2 rapports arrières.Tous les essieux sont directeurs. Les essieux 1, 3 et 4 avec planétaires et blockages dedifférentiels.Tous les essieux sont suspendus hydropneumatiquement et blocable hydrauliquement.8 roues. Taille: 16.00 R 25.Direction mécanique à assistance hydraulique des essieux avants. Pompe de secours.Direction des essieux arrières enclenchable hydrauliquement. Direction hydrostatiquede tous les essieux à commande depuis la cabine du grutier. Direction selon directiveCE 70/311/CEE.Frein de service: servo-frein pneumatique à deux circuits indépendants agissant surtoutes les roues. Frein à main: par cylindres à ressorts, agissant sur les roues desessieux 2, 3 et 4. Frein à régime continu: Ralentisseur sur échappement avec systèmede freinage additionnel Liebherr. Freins selons directive CE 71/320/CEE.Cabine conducteur bi-place en tôle d’acier revêtue anti-corrosion par bain de cataphorèse,peinte par poudrage polyester et cuisson au four comportant tous les organes decommande et de contrôle nécessaire à la conduite du véhicule.Composants électriques et électroniques reliés entre eux par bus de données moderne.Courant continu 24 Volts, 2 batteries, éclairage conforme au code de la route.

Diesel 6 cylindres, marque Liebherr, type D 9406 TI-E, refroidi par eau, puissance320 kW (435 ch) à 2100 min selon ECE-R 24.03 et 2001/27/EG (Euro 3), couple max.1900 Nm à 1100 – 1400 min , gestion électronique par Liebherr bus de données.Réservoir à carburant: 400 l.

16760 lbs pour une masse totale de 35500 lbs.

Châssis porteur.

Châssis:

Entraînement:

Commande:

Treuil:

Relevage de flèche:Orientation:

Cabine de grue:

Sécurités:

Flèche télescopique:

Contrepoids:Circuit électrique:

Construction mécanosoudée en tôle d’acier à haute résistance à grains fins. Reliée auporteur par une couronne d’orientation à 3 rangées de rouleaux. Rotation totale 360°.

Par deux manipulateurs (type manche à balai) dans la cabine du grutier, et par variationélectronique du régime du moteur Diesel, servo-commande électrique avec régulationprogressive en continu de tous les mouvements en simultané. Technique de transmissionpar bus de données Liebherr.Moteur hydraulique à cylindree constante, treuil à réducteur planétaire incorporé etfrein d'arrêt à ressort, en circuit hydraulique ouvert.1 vérin différentiel à soupape pilotage de freinage.Moteur hydraulique, réducteur planétaire, frein d'arrêt commandé par ressort en circuithydraulique ouvert. Vitesse d'orientation réglable en continu.Entièrement en tôle d’acier avec vitrage de sécurité, chauffage, tous les instrumentsde commande et de contrôle. Cabine inclinable sur l’arrière.Contrôleur de charge LICCON, fin de course crochet haut, clapets de sécurité en cas deruptures de flexibles.Construction en acier à haute résistance à grains fins à profil oval à haute résistanceau flambage, 1 élément de base et 5 éléments télescopiques. Chaque élément télesco-pable indépendamment de l’autre. Système de télescope «Télématik» séquentiel rapide.Télescope: 35 ft à 157 ft.Contrepoids de base 18740 lbs.Composants électriques et électroniques reliés entre eux par bus de données moderne.

Diesel hydraulique avec 1 pompe double à débit variable et regulation de puissanceautomatique, 1 pompe à engrenages double, entraînés par le moteur Diesel du porteur,circuits hydrauliques ouverts avec "load sensing", régulé électriquement. 4 mouvementssimultanés practicables.

Partie tournante.

Equipement optionnel.

-1

-1

TP 273c. US. 1.99Subject to modification. / Sous réserve de modifications.

Please contactVeuillez prendre contact avecLIEBHERR-WERK EHINGEN GMBHD-89582 Ehingen/Donau, Telefon (0 73 91) 5 02-0, Telefax (0 73 91) 5 02-33 99www.liebherr.com, E-mail: info@lwe.liebherr.com