Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
3
© LUCEM Lichtbeton® GmbH1. Auflage Juli 2019
Alle Angaben dieser Druckschrift entsprechen dem neu-esten Stand der Entwicklung und wurden nach bestem Wissen und Gewissen für Sie erarbeitet. Da wir stets be-strebt sind, Ihnen die bestmöglichen Lösungen anzubie-ten, sind Änderungen aufgrund anwendungs- oder produk-tionstechnischer Verbesserungen vorbehalten. Versichern Sie sich, ob Sie die aktuellste Ausgabe dieser Druckschrift vorliegen haben.Druckfehler sind nicht auszuschließen.
Die vorliegende Publikation richtet sich an geschulte Fach-kräfte. Eventuell enthaltene Abbildungen von ausführen-den Tätigkeiten sind keine Verarbeitungsanleitungen, es sei denn, sie sind als solche ausdrücklich gekennzeichnet.
Bitte beachten Sie auch, dass unseren Geschäftsbezie-hungen ausschließlich unsere Allgemeinen Verkaufs-, Lie-ferungs- und Zahlungsbedingungen (AGBs) in der aktuel-len Fassung zugrunde liegen. Unsere AGBs erhalten Sie auf Anfrage oder im Internet unter www.lucem.com
Wir freuen uns auf eine gute Zusammenarbeit und wün-schen Ihnen gutes Gelingen mit unserem Produkt.
2007 als Start-up der RWTH Aachen gegründet, entwi-ckelte LUCEM weltweite Aktivitäten und lieferte maßge-schneiderte Kunstwerke mit glänzendem Beton. Dr. And-reas Roye ist der Gründer von Lucem. Heute, 2019, bietet LUCEM Komplettpakete für Installationen hochwertiger Innen- und Außenbeleuchtung.
Die LUCEM GmbH stellt seit 2007 lichtleitende Betonele-mente her. Seit Juni 2019 besteht eine Kooperation zwi-schen LUCEM und Holcim Deutschland (www.holcim.de). Ziel der Zusammenarbeit ist es, die jeweiligen Stärken der Partner für optimierte Produktionsschritte und verbesserte Vertriebswege zu nutzen sowie gemeinsam weitere neue Ideen für transluzente Betonprodukte zu entwickeln.Design und Lichttechnik liegen bei LUCEM, Holcim küm-mert sich primär um den passenden Beton, um die Groß-serienfertigung in eigenen Betonfertigteilwerken der Toch-terfirma VETRA Betonfertigteilwerke GmbH und um neue Marketing- und Vertriebswege.
Speziell für die Produkte von LUCEM hat Holcim das Spe-zialbindemittel Holcim EcoFlow entwickelt. EcoFlow bildet stets die Basis für die jeweiligen Produkte bzw. Projekte maßgeschneiderten Betonzusammensetzungen.
Die Sonderbetone für die Lichtbetonelemente von LUCEM müssen sehr fließfähig sein, um zwischen die Lichtfasern zu gelangen. Gleichzeitig sind sehr hohe Früh- und End-festigkeiten gefragt. Da die meist sehr filigranen, großflä-chigen Bauteile zu dekorativen Zwecken eingesetzt wer-den, müssen zusätzlich die Farbgleichmäßigkeit garantiert und jegliche Formänderungen wie Schwinden und Auf-schüsseln ausgeschlossen sein.
© LUCEM Lichtbeton® GmbH1st edition July 2019
All information contained in this publication is state of the art and has been developed to the best of our knowledge and belief. Because we always strive to provide you with the best possible solutions, we reserve the right to make changes due to application or production improvements. Make sure you have the latest edition of this puplication. Printing errors can not be ruled out completely. This publi-cation is aimed at trained professionals. Any illustrations af activities to be performed are not processing instructions unless they are expressly identified as such.
Please also note that our business relationships are ba-sed exclusively on our General Terms of Sale, Delivery and Payment (AGBs) Our terms and conditions are available on request or online at www.lucem.com
We look forward to a good cooperation and wish you good luck with our products.
Founded in 2007 as a start-up from RWTH Aachen uni-versity, LUCEM developed worldwide activities and provi-ded customized artwork references with shining concrete. Dr. Andreas Roye is the highly engaged founder of Lucem. He has a master and PhD degree from RWTH university in Aachen since 2007 and immediately founded his own company to design the world with stunning light solutions. Today, 2019, LUCEM provides a full package for installati-ons of high-class indoor and outdoor illumination.
LUCEM GmbH has been producing light conducting concrete elements since 2007. The founder of Lucem LUCEM and Holcim Germany have been cooperating since June 2019 (www.holcim.de). The aim of the cooperation is to use the respective strengths of the partners for optimized production steps and improved distribution channels and to develop further new ideas for translucent concrete products. LUCEM is responsible for design and lighting technology, while Holcim is primarily concerned with finding the right concrete, with large-scale production in its own precast con-crete plants of its subsidiary VETRA Betonfertigteilwerke GmbH and with new marketing and distribution channels. Holcim has developed the special binder Holcim EcoFlow especially for LUCEM products. EcoF-low always forms the basis for concrete compositi-ons tailored to the respective products or projects. The special concretes used for LUCEM‘s translucent con-crete elements must be highly free-flowing in order to get between the optical fibers. At the same time very the strengths are required. As the mostly very filigree, large-area elements are used for decorative purposes, colour uniformity must be guaranteed and any changes in shape such as shrinkage and disintegration must be excluded.
4
Eingebettete optische Fasernleiten das einfallende Licht durchden Beton. Dadurch entstehteine transluzente Optik.Die aufgelöste und dennoch linien-artige Struktur der hochfeinen Licht-fasern lässt die Anmutung eines leichten Stoffes entstehen,der je nach Lichteinfall Objekte als Schattenspiel sichtbar werden lässt und den Blick elegant fängt.
The translucent effect is created by embedded optical fibers which trans-mit light through the concrete. Which creates a translucent appearence.The embedded optical fiber structu-res allow the objects to form a dy-namic play of light depending on the incidence of light which elegantly cat-ches the eye.
anthrazitanthracite
weißwhite
LUCEM LINE LUCEM LINE
Oberfläche / surface:Seidenmatt gebürstet / satin matt finished
5
Technische Daten LUCEM LINE
Formate:
Dicken:Farben:
Anwendungsbe-reich:
Oberflächen:Texturen:
Festigkeit:Dichte:
Biegezug:
Baustoffklasse:UV Beständig-keit:
Toleranzen:
ZertifizierendePrüfinstitute:
Montagesystem:
Anzahl optische Fasern:
Durchmesser optische Fasern:
LUCEM Lichtbetonplattenwerden als Platten in unterschiedlichen Dicken und Far-ben angeboten. Die Platten sind ab Werk kalibriert, matt satiniert und imprägniert.
LUCEM light transmitting concreteis offered as panels in different colors and thicknesses. The panels are calibrated, matt satin finished and im-pregnatet.
1200 x 600 mm / 1600 x 600 mmAuf Wunsch können beliebige Formatzuschnitte, Kantenbearbei-tungen, Ausschnitte und Montage-bohrungen ab Werk vorgenommen werden.
20 mm / 30 mmweiß / anthrazit / grauweitere Farben auf Anfragemöglich
Innen, außen
seidenmatt gebürstetfeinkörnige Betonmatrix und optische Fasern in linienartiger AnordnungC70 / 85~ 2400 kg/m3
>4 N/mm²
A2: nicht brennbar
beständig nach ETAG 005 TR 010 „severe“Länge, Breite, Höhe, Ebenheit nach DIN EN 1341
Materialprüfungsamt NRW,DortmundBrandprüfzentrum, ErwitteKIWA Polymer Institut,Flörsheim-Wicker
DornankerHinterschnittankerSchraubankerVerkleben verweis auf technisches Datenblatt
200.000 / m²
0,5 mm
Technical specifications LUCEM LINE
Formats:
Thickness:Colors:
Application:
Surface:Texture:
Strength:Density:Flexural strength:
Building material class:UV resistance:
Tolerances:
Certifiedsupervisors:
Installationsystem:
Numbers offiber optics:
Diameter offiber optics:
1200 x 600 mm / 1600 x 600 mmvariable cuttings, edge processing, notches and mounting holes on request
20 mm / 30 mm white / dark grey / greyother colors upon request.
indoor, outdoor
matt satin finished fine-grained concrete matrix and optical fibers in linear structure
C70 / 85~ 2400 kg/m3
>4 N/mm²
A2: nonflammable
stable acc. to ETAG 005 TR 010 „severe“length, wide, height and evenness acc. to DIN EN 1341
Materialprüfungsamt NRW,DortmundBrandprüfzentrum, ErwitteKIWA Polymer Institut,Flörsheim-Wicker
Pin anchorUndercut anchorScrew anchor Glueing
200.000 / m²
0.5 mm
refer to technical data sheet
6
LUCEM STARLIGHT
Punktuelle Transparenz - Wirkung eines Sternenhimmels
Lichtleitende Fasern unterschiedli-chen Durchmessers sind in unregel-mäßigen Abständen angeordnet.
Dadurch entsteht die Wirkung eines Sternenhimmels in dem diegrößeren Lichtpunkte hervortreten und dem Beton eine dreidimensional anmutende Leuchtkraft verleihen.
Selective Translucency - The Im-pression of a starry sky light effect.
Optical fibers in different diame-ter are emdedded in an irregular pattern.
This creates the effect of a starry sky in which the larger light points stand out and give the concrete a three-dimensional luminosity.
anthrazitanthracite
weißwhite
anthrazitanthracite
weißwhite
graugrey
LUCEM STARLIGHT
Oberfläche / surface:Seidenmatt gebürstet / satin matt finished
Oberfläche / surface:Schalungsglatt / formwork plain
7
Technische Daten LUCEM STARLIGHT
Formate:
Dicken:Farben:
Anwendungsbe-reich:Oberflächen:
Texturen:
Festigkeit:Dichte:
Biegezug:
Baustoffklasse:
UV Beständig-keit:
Toleranzen:
ZertifizierendePrüfinstitute:
Montagesystem:
Anzahl optische Fasern:Durchmesser optische Fasern:
1200 x 600 mmAuf Wunsch können beliebige Formatzuschnitte, Kantenbearbei-tungen, Ausschnitte und Montage-bohrungen ab Werk vorgenommen werden.30 mmweiß / anthrazit / grauweitere Farben auf Anfrage
Innen, außenSchalungsglatt seidenmatt ge-bürstetUnregelmäßige Anordnung von Optischen Fasern mit unterschied-lichen DurchmessernC70 / 85~ 2400 kg/m3
>4 N/mm²
A2: nicht brennbar
beständig nach ETAG 005 TR 010 „severe“Länge, Breite, Höhe, Ebenheit nach DIN EN 1341
Materialprüfungsamt NRW,DortmundBrandprüfzentrum, ErwitteKIWA Polymer Institut,Flörsheim-Wicker
DornankerHinterschnittankerSchraubankerVerkleben
500 / m²
1, 2, 3 mm
Technical specifications LUCEM STARLIGHT
1200 x 600 mmvariable cuttings, edge processing, notches and mounting holes upon request
30 mm white / dark grey / greyother colors on request.
indoor, outdoorformwork plainIrregular pattern of fiber optics with different diameters
C70 / 85~ 2400 kg/m3
>4 N/mm²
A2: nonflammable
stable acc. to ETAG 005 TR 010 „severe“Length, width, height and even-ness acc. to DIN EN 1341
Materialprüfungsamt NRW,DortmundBrandprüfzentrum, ErwitteKIWA Polymer Institut,Flörsheim-Wicker
Pin anchorUndercut anchorScrew anchorGlueing
500 / m²
1, 2, 3 mm
Formats:
Thickness:Colors:
Application:Surface:Texture:
Strength:Density:Flexural strength:
Building material class:
UV resistance:
Tolerances:
Certifiedsupervisors:
Installationsystem:
Number offiber optics:Diameter offiber optics:
8
LUCEM PURE
Sichtbeton mit gleicher Betonzu-sammensetzung wie LUCEM LINE oder LUCEM STARLIGHT, ohne lichtleitende Fasern.
Gleiche Betonrezeptur, aber ohne lichtleitende Fasern. LUCEM PURE eignet sich hervorra-gend zur Herstellung großer Be-ton-Fassadenelemente. Durch das Einbringen unserer lichtleitenden Produkte, LUCEM LINE oder LU-CEM STARLIGHT ergibt sich so ein einheitliches Obenflächen-Design mit optischen Highlights.
Exposed concrete with the same concrete composition as LUCEM LINE or LUCEM STARLIGHT, wit-hout light conducting fibres.Same Concrete formula, but withoutoptical fibers.
LUCEM PURE is ideally suited for the production of large concrete facade elements. By inserting our light-conducting products, LUCEM LINE or LUCEM STARLIGHT, a uniform surface design with optical highlights is created.
Only partial highlights will be made with LUCEM LINE or LUCEM STARLIGHT.
anthrazitanthracite
weißwhite
anthrazitanthracite
weißwhite
graugrey
LUCEM PURE
Oberfläche / surface:Seidenmatt gebürstet / satin matt finished
Oberfläche / surface:Schalungsglatt / formwork plain
9
Technische Daten LUCEM PURE Technical specifications LUCEM PURE
Formate:
Dicken:Farben:
Anwendungsbe-reich:Oberflächen:
Texturen:
Festigkeit:Dichte:
Biegezug:
Baustoffklasse:UV Beständig-keit:
Toleranzen:
ZertifizierendePrüfinstitute:
Montagesystem:
1200 x 600 mmAuf Wunsch können beliebige Formatzuschnitte, Kantenbearbei-tungen, Ausschnitte und Montage-bohrungen ab Werk vorgenommen werden.
30 mmweiß / anthrazit / grauweitere Farben auf Anfrage
Innen, außenseidenmatt gebürstet / poliert /schalungsglattfeinkörnige Betonmatrix
C70 / 85~ 2400 kg/m3
>12 N/mm²
A2: nicht brennbar
beständig nach ETAG 005 TR 010 „severe“
Länge, Breite, Höhe, Ebenheit nach DIN EN 1341
Materialprüfungsamt NRW,DortmundBrandprüfzentrum, ErwitteKIWA Polymer Institut,Flörsheim-Wicker
DornankerHinterschnittankerSchraubankerVerkleben
1200 x 600 mmvariable cuttings, edge processing, notches and mounting holes on request
30 mm white / dark grey / greyother colors on request.
indoor, outdoormatt satin finished / polished /formwork plainfine-grained concrete matrix / -
C70 / 85~ 2400 kg/m3
>12 N/mm²
A2: not flammable
stable acc. to ETAG 005 TR 010 „severe“
Length, width, height and even-ness acc. to DIN EN 1341
Materialprüfungsamt NRW,DortmundBrandprüfzentrum, ErwitteKIWA Polymer Institut,Flörsheim-Wicker
Pin anchorUndercut anchorScrew anchorGlueing
Formats:
Thickness:Colors:
Application:Surface:
Texture:
Strength:Density:Flexural strength:
Building material class:
UV resistance:
Tolerances:
Certifiedsupervisors:
Installationsystem:
10
Technische DatenLED Board
Technical specificationsLED board
IP Schutz-klasse:
Spannung:
Leistung:
Farbe:
Lichtstrom:
Farbtemperatur:
Lebensdauer:
benötigter Bauraum:
IP 20
48 V
75 Watt/m²
3000K4000K5000K6000K
23.000 lm/m²
3000K4000K5000K6000K
~ 30.000 Stunden
~ 30 mm
IP protection class:
Voltage:
Power:
Color:
Illumination flux:
Color tempera-ture:
Lifetime:
Installation space:
LUCEM LED BeleuchtungEs stehen unterschiedliche LED-Systeme zur Verfügung.Kleinere LED-Module die z.B. in Profile eingepasst werden oder komplette LED-Boards auf denen die LEDs fest fixiert sind und passgenau auf die Betonplatten zu-geschnitten werden können.
LUCEM LED lightingThere are different LED systems available.Smaller LED modules, are fitted into profiles or complete LED boards on which the LEDs are firmly fixed and can be tailored to fit the concrete panels.
IP 20
48 V
75 Watt/m²
3000K4000K5000K6000K
23.000 lm/m²
3000K4000K5000K6000K
~ 30.000 hours
~ 30 mm
11
Technische DatenLED Module mit Aluminium U-Profilen
Technical specificationsLED Modules with aluminium U-profiles
IP Schutz-klasse:
Spannung:
Leistung:
Farbe:
Lichtstrom:
Farbtemperatur:
Lebensdauer:
benötigter Bauraum:
IP 65
48 V
1,5 Watt/modul
RGBW / weiß
120 lm/modul (RGBW)180 lm/modul (weiß)
3000K4000K5000K6000K
~ 30.000 Stunden
~ 100 mm
IP protection class:
Voltage:
Power:
Color:
Illumination flux:
Color tempera-ture:
Lifetime:
Installation space:
IP 65
48 V
1,5 Watt/modul
RGBW / white
120 lm/modul (RGBW)180 lm/modul (white)
3000K4000K5000K6000K
~ 30.000 hours
~ 100 mm
12
Montage-SystemDornanker InnenwandverkleidungMontage Schrit für Schritt
Installation systembody anchor indoor wall coveringinstallation step by step
Schritt 01
Edelstahlwinkel mit statisch tragendemMauerwerk ver-schrauben.
Step 01
Body anchor fixed onstructural wall.
Schritt 02
Aluminium U-Profile mit LED-Modulenebenfalls mit Mauerwerk ver-schrauben.
Step 02
Aluminium U-profiles with LED-modulesfixed on wall.
Der Montage-Bausatz "Dornanker" ist unsere empfohlene Montagelösung.Die Montagetechnik ist sowohl für Innen als auch fürAussen geeignet und nach DIN 18516-5 ein geregelterBaustoff.Eine Zustimmung im Einzelfall wird daher nicht benötigt.Die LUCEM GmbH liefert neben Montagematerialauch passende auf das Projekt abgestimmteLichttechnik.
The mounting kit „Body anchor with pin“ is our recommended mounting solution. The assembly technique is suitable both for insideand outside and according to DIN 18516-5 a regulated building material.An appoval in an individual case is therefore not required. In addition to mounting material, LUCEM® GmbHalso supplies suitable lighting technology tailored to the project.
13
Schritt 03
LEDs einschalten und Funktionsfähigkeit prüfen.(Mehrere Stunden eingeschaltet lassen.)
Step 03
Testing of LEDsystem.(Several hours of tes-ting is recommended)
Schritt 04
Erst nach Überprü-fung der LEDs die Betonplatten derReihe nach einhän-gen und mit Dorn fixieren.
Step 04
After approval of LED system the concrete panels will be placed and fixed with pin an-chors.
Montage-SystemDornanker InnenwandverkleidungMontage Schrit für Schritt
Installation systembody anchor indoor wall coveringinstallation step by step
14
Montage-SystemDornanker InnenwandverkleidungTechnische Zeichnungen
Installation systembody anchor indoor wall coveringtechnical drawings
Montagetechnik ist geeignet fürInnen und Aussen
Geregelter Baustoff für Fassadennach DIN 18516-5
Installation system is suitable forindoor and outdoor applications
Regulated building material accordingto DIN 1816-5
Randabstand Dorn:1/5 der Plattenlänge /Distance for pin anchor:1/5 of panel lenght
240 720 2405
240 720 240
12005
1200
≥ 5 mm Fuge horizontal und vertikal≥ 5 mm joint horizontal and vertical
12
612 120
Abstand zwischen LED undLUCEM-Lichtbeton®
STARLIGHT ≥ 40 mmLINE ≥ 100 mm /
Distance between LED andLUCEM-Lichtbeton®
STARLIGHT ≥ 40 mmLINE ≥ 100 mm
Aluminium U-Profilemit LED Modulen inkl. Kabel,
Verschraubung mit Mauerwerk /Aluminium U-profiles
with LED modules including cable,fixed with structural wall
LUCEM-Lichtbeton®
30 x 600 x 1200 mm
Mauerwerk /Structural wall
Body Anker inkl.Gewindeausleger und Dornanker,Verschraubung mit Mauerwerk /Body anchor including pin anchor,fixed with structural wall
15
Montage-SystemDornanker InnenwandverkleidungTechnische Zeichnungen
Installation systembody anchor indoor wall coveringtechnical drawings
Mauerwerk /Structural wall
Aluminium U-Profilemit LED Modulen inkl. Kabel,Verschraubung mit Mauerwerk /Aluminium U-profileswith LED modules including cable,fixed with structural wall
Body Anker inkl.Gewindeausleger und Dornanker,Verschraubung mit Mauerwerk /Body anchor including pin anchor,fixed with structural wall
LUCEM-Lichtbeton®
30 x 600 x 1200 mm
Abstand zwischen LED undLUCEM-Lichtbeton®
STARLIGHT ≥ 40 mmLINE ≥ 100 mm /Distance between LED andLUCEM-Lichtbeton®
STARLIGHT ≥ 40 mmLINE ≥ 100 mm
Dornanker /Pin anchor
≥ 5 mm Fuge horizontal und vertikal≥ 5 mm joint horizontal and vertical Gleithülse /Slide sleeveBohrloch und Fugenmörtel / Borehole and grout
Bohrloch und Fugenmörtel / Borehole and grout
12 126100
600
6
00
5
Mauerwerk /Structural wall
Aluminium U-Profilemit LED Modulen inkl. Kabel,Verschraubung mit Mauerwerk /Aluminium U-profileswith LED modules including cable,fixed with structural wall
Body Anker inkl.Gewindeausleger und Dornanker,Verschraubung mit Mauerwerk /Body anchor including pin anchor,fixed with structural wall
LUCEM-Lichtbeton®
30 x 600 x 1200 mm
Abstand zwischen LED undLUCEM-Lichtbeton®
STARLIGHT ≥ 40 mmLINE ≥ 100 mm /Distance between LED andLUCEM-Lichtbeton®
STARLIGHT ≥ 40 mmLINE ≥ 100 mm
Dornanker /Pin anchor
≥ 5 mm Fuge horizontal und vertikal≥ 5 mm joint horizontal and vertical Gleithülse /Slide sleeveBohrloch und Fugenmörtel / Borehole and grout
Bohrloch und Fugenmörtel / Borehole and grout
12 126100
600
6
00
5
16
Montage-SystemDornanker InnenwandverkleidungBeispiele für Endmontage
Installation systembody anchor indoor wall coveringexample for final installation
STARLIGHT
AnwendungsbeispielAufbau Innenwandver-kleidung mit Standard-platten 1200 x 600 mm
STARLIGHT
sample application forconstruction interior wall cladding with standard panels1200 x 600 mm
LINE
AnwendungsbeispielEndmontage Innen-wandverkleidung mitStandardplatten1200 x 600 mm
LINE
sample application forfinal mounting interiorwall cladding with stan-dard panels1200 x 600 mm
17
Montage-SystemDornanker InnenwandverkleidungBeispiele für Endmontage
Installation systembody anchor indoor wall coveringexample for final installation
Beispiel fürGemischteInnenfassaden:
PURE undSTARLIGHTOberfläche:Schalungsglatt,grau
Example for mixedinterior facade:
PURE andSTARLIGHTsurface:formwork plain,grey
Beispiel fürGemischteInnenfassaden:
PURE undLINEOberfläche:Terrazzo-ähnlich,anthrazit
Example for mixedinterior facade:
PURE andLINEsurface:terazzo-like,anthracite
18
Montage-SystemMörtelanker AussenfassadeMontage Schrit für Schritt
Installation systemgrout anchor outdoor facadeinstallation step by step
Schritt 01
Dämmung und Rahmenkonstruktion aus Aluminium Flach-binder zur Befesti-gung vorbereiten.
Step 01
Insulation andframe constructionfrom aluminum flat-binders prepared for fixing.
Schritt 02
Dämmung und Rahmenkonstruktion mittels Mörtelanker mit Mauerwerk fixie-ren
Step 02
Insulation andframe constructionfixing by grout anchor with the brickwork.
Der Montage-Bausatz „Mörtelanker“ ist unsereempfohlene Montagelösung für Aussenfassaden.Die Montagetechnik ist nach DIN 18516-5 ein geregelterBaustoff. Eine Zustimmung im Einzelfall wird nicht benötigt.
The mounting kit „Grout anchor with pin“ is our recommendation for mounted solution foroutdoor facade. The assembly technique and according to DIN 18516-5 a regulated building material.An appoval in an individual case is therefore not required.
19
Schritt 03
LED-Module an Rahmenkonstruktion befestigen.LEDs einschalten und Funktionsfähigkeit prüfen.(Mehrere Stunden eingeschaltet lassen.)
Step 03
Fixing LED modules to frame construction.Switch LEDs on andCheck functionality.(Leave on for several hours)
Testing of LED
Schritt 04
Erst nach Überprü-fung der LEDs die Betonplatten derReihe nach einhän-gen und mit Dorn fixieren.
Step 04
After approval of LED system the concrete panels will be placed and fixed with pin an-chors.
Montage-SystemMörtelanker AussenfassadeMontage Schrit für Schritt
Installation systemgrout anchor outdoor facadeinstallation step by step
20
Montagetechnik ist besonders geeignetfür Aussen
Geregelter Baustoff für Fassadennach DIN 18516-5
Installation system is specifically suitable foroutdoor applications
Regulated building material accordingto DIN 1816-5
Montage-SystemMörtelanker AussenfassadeTechnische Zeichnungen
Installation systemgrout anchor outdoor facadetechnical drawings
Randabstand Dorn:1/5 der Plattenlänge /Distance for pin anchor:1/5 of panel lenght
Dämmung /InsulationMauerwerk /Structural wall
Abstand zwischen LED undLUCEM-Lichtbeton®
STARLIGHT ≥ 40 mmLINE ≥ 100 mm /Distance between LED andLUCEM-Lichtbeton®
STARLIGHT ≥ 40 mmLINE ≥ 100 mm
Aluminium U-Profilemit LED ModulenAluminium U-profileswith LED modules
Mörtel /GroutSechskant Sicherheitsmuttermit Unterlegscheibe /hexagonal safety nutwith washerLUCEM-Lichtbeton®
30 x 600 x 1200 mm
40 x 5 mm AluminiumRahmenkonstruktion /Aluminum frame construction
M28 Mörtel Anker inkl.Gewindeauslegerund Dornanker,M28 Grout anchor including pin anchor,
12005
1200
240 720 2405
240 720 240
≥ 5 mm Fuge horizontal und vertikal≥ 5 mm joint horizontal and vertical
12612 80
1510
0
21
Montage-SystemMörtelanker AussenfassadeTechnische Zeichnungen
Installation systemgrout anchor outdoor facadetechnical drawings
12 126100 15 80
≥ 5 mm Fuge horizontal und vertikal≥ 5 mm joint horizontal and vertical Gleithülse /Slide sleeveBohrloch / Borehole
Bohrloch / Borehole
LUCEM-Lichtbeton®
30 x 600 x 1200 mm
M28 Mörtel Anker inkl.Gewindeausleger und Dornanker,M28 Grout anchor including pin anchor,
Mauerwerk /Structural wall
Sechskant Sicherheitsmuttermit Unterlegscheibe /hexagonal safety nutwith washer
Aluminium U-Profilemit LED ModulenAluminium U-profileswith LED modules
Mörtel /Grout
Abstand zwischen LED undLUCEM-Lichtbeton®
STARLIGHT ≥ 40 mmLINE ≥ 100 mm /Distance between LED andLUCEM-Lichtbeton®
STARLIGHT ≥ 40 mmLINE ≥ 100 mm
Dämmung /Insulation
Dornanker /Pin anchor
40 x 5 mm AluminiumRahmenkonstruktion /Aluminum frame construction
600
6
00
5
22
Montage-SystemMörtelanker AussenfassadeBeispiele Endmontage
Installation systemgrout anchor outdoor facadeexample for final installation
STARLIGHT
AnwendungsbeispielAufbau Aussenfassade mit Standardplatten1200 x 600 mm
STARLIGHT
sample application forconstruction outdoor facade with standard panels 1200 x 600 mm
LINE
AnwendungsbeispielEndmontage Aussenfassademit RandeinfassungStandardplatten1200 x 600 mm
LINE
sample application forfinal mountingoutdoor facade withedge bandingstandard panels1200 x 600 mm
23
Montage-SystemMörtelanker AussenfassadeBeispiele Endmontage
Installation systemgrout anchor outdoor facadeexample for final installation
Beispiel fürGemischteAussenfassaden:
PURE undSTARLIGHTOberfläche:Terrazzo-ähnlich,anthrazit
Beispiel fürGemischteAussenfassaden:
PURE undLINEOberfläche:Terrazzo-ähnlich,weiß
Example for mixedoutdoor facade:
PURE andLINEsurface:terazzo-like,white
Example for mixedoutdoor facade:
PURE andSTARLIGHTsurface:terazzo-like,anthracite
24
Impressum Impressum
Rechtliche Hinweise
Die LUCEM GmbH - im folgenden LUCEM genannt - übernimmt keinerlei Gewähr für die Aktualität, Korrekt-heit, Vollständigkeit oder Qualität der bereitgestelltenInformationen.Haftungsansprüche gegen LUCEM, welche sich auf Schäden materieller oder ideeller Art beziehen, die durch die Nutzung oder Nichtnutzung der dargebotenen Infor-mationen bzw. durch die Nutzung fehlerhafter und unvoll-ständiger Informationen verursacht wurden, sind grund-sätzlich ausgeschlossen, sofern seitens LUCEM kein nachweislich vorsätzliches oder grob fahrlässiges Ver-schulden vorliegt.Alle Angebote sind freibleibend und unverbindlich.LUCEM behält es sich ausdrücklich vor, Teile der Seiten oder das gesamte Angebot ohne gesonderte Ankündi-gung zu verändern, zu ergänzen, zu löschen oder die Veröffentlichung zeitweise oder endgültig einzustellen.
Wir freuen uns auf eine gute Zusammenarbeitund wünschen Ihnen gutes Gelingenmit unserem Produkt.
Legal Notice
The LUCEM GmbH - hereinafter referred to as LUCEM - assumes no responsibility for the latest release, correct-ness, completness or quality of the information provided.Liability claims against LUCEM, which relate to material or immaterial nature, caused by the use or non-use of the information provided or by the use of incorrect and incomplete information, are excluded, unless LUCEM has proven to be intentional or grossly negligent.
All offers are non-binding. LUCEM expressly reserves the right to change, supplement or delete parts of the pages or the entire offer without prior notice or to cease publica-tion temporarily or permanently.
We look forward to a good cooperationand wish you good luck with our product.
Anschrift / Address:Lucem GmbHPhilipsstraße 8D-52068 Aachen
Geschäftsführer / CEO:Dr.-Ing. Andreas Roye
Kontakt / Contact:phone: +49 (0)241 446 8353 0
26
LUCEM GmbH • Philipsstr. 8 • D – 52068 Aachen • Tel. +49 (0)241 4468353-0 • Fax: + 49 (0)241 4468353-9 • www.lucem.deGeschäftsführer: Dr.-Ing. Andreas Roye • Amtsgericht Aachen HRB14222 • USt.-IdNr.: DE253827430• StNr.: 202/5811/1922Sparkasse Aachen (BLZ 390 500 00) • Kto.-Nr. 1070115553 • IBAN DE7539050000 1070115553 • BIC/SWIFT AACSDE33