FRONTEAttenzione, rimuovere tutte le linee guidaDimensioni documento aperto21.2 cm (base) x 29.9 cm (altezza)Area stampabile21 cm (base) x 29.7 cm (altezza)

Margine di abbondanza

Taglio

Area sicura

Three Phase Separators

RETRO

Global Headquarters

FORAIN ItaliaVia G.B. Boeri, 1120141 Milano (ITALY)Tel. +39 02 8467345Fax +39 02 8465325

SubsidiaryAsia Paci�c Headquarters

37, Tannery Lane #04-10Tannery HouseSingapore 347790Tel. +65 6636 1826Fax +65 6636 0169

Subsidiary Myanmar

Parame Condo, Building 12+1Room 706, 7 �oorParame Street Hlaing TownshipYangon, Myanmar

SubsidiaryTurkey

Kozyatağı Mahallesi, Bayar Caddesi Rıza Çemberci İş Merkezi No: 72 Kat: 6 Daire: 10Kadıköy / İstanbul

www.forain.net #engineeringchallenges

ComponentThe three phase separators can be horizontal or vertical and is used on a well in order to separate water, oil, and gas from an in�ow �uid . This division facilitate continuous production with no need to interrupt ongoing work to perform repairs or maintenance tasks on wells.

Basic Design Principles - A primary separation section – The primary separation section is situated at the inlet to the vessel and is designed to separate the �uids from any entrained gas. - Secondary separation – The secondary separation section is designed to facilitate the separation of the liquid constituents into light and heavy phases according to their speci�c gravity. Typically oil comprises the light phase and water the heavy phase. - Coalescing section – The coalescing section includes a vapour coalescer or mist extractor to remove liquid droplets from the gas. A wire mesh eliminator is often used for this purpose.

Bene�ts of 3-Phase SeparatorsA 3 phase separator is a wise decision for all the companies that maintains �eld production facilities in the petroleum industry. Without a high-performance separator, your team will be left to guesswork to determine the volume and composition of out�owing resources, which can lead to errant decisions that may compromise your bottom line.A 3-phase separators can be used in environments with high levels of hydrogen sulphide. These oil & gas separators are also environmentally friendly and help reduce potentially devastating and costly accidents while increasing the lifespan of supplementary extraction and testing equipment.