Tiêu chuẩn, quy chuẩn kỹ thuật

BM09-BTTC-TG LBH:02 LSĐ:00 Ngày BH: 15/10/2012 Trang 1/8

TRUNG TÂM THÔNG TIN

KHOA HỌC VÀ CÔNG NGHỆ

TIÊU CHUẨN MỚI THÁNG 10/2012

Trong tháng 10/2012, Trung tâm Thông tin Khoa học và Công nghệ xin gởi đến

Quý vị Danh mục các Tiêu chuẩn mới sau:

TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4

TIÊU CHUẨN VIỆT NAM

1 QCVN 01-

103:2012/BNNPTNT

Quy chuẩn kỹ thuật quốc gia về khảo nghiệm, kiểm

định thức ăn chăn nuôi gà.

9

2 QCVN 01-

102:2012/BNNPTNT


định đà điểu giống.

8

3 QCVN 01-

101:2012/BNNPTNT

Quy chuẩn kỹ thuật quốc gia về khảo nghiệm kiểm định

ong mật giống.

9

4 QCVN 01-

104:2012/BNNPTNT


định thức ăn chăn nuôi lợn.

10

5 TCVN 7487:2005 Nhiên liệu tuốc bin hàng không. Phương pháp xác định

độ ổn định ôxy hóa nhiệt.

31

6 QCVN

42:2012/BGTVT

Quy chuẩn kỹ thuật quốc gia về trang bị an toàn tàu

biển.

236

TIÊU CHUẨN ISO

1 ISO/IEC 40500:2012 Information technology - W3C Web Content

Accessibility Guidelines (WCAG) 2.0.

2

2 ISO 18738-2:2012 Measurement of ride quality - Part 2: Escalators and

moving walks.

16

3 ISO 25745-1:2012 Energy performance of lifts, escalators and moving

walks - Part 1: Energy measurement and verification.

15

4 ISO 39001:2012 Road traffic safety (RTS) management systems -

Requirements with guidance for use.

37

5 ISO 7176-28:2012 Wheelchairs - Part 28: Requirements and test methods 99

Liên hệ: Phòng Thông tin

ĐC: 79 Trương Định, Quận 1, TP.HCM

ĐT: 38243826 - 38297040 (203-202-102) - Fax: 38291957

Website: www.cesti.gov.vn - Email: [email protected]

Tháng10 /2012

SỞ KHOA HỌC VÀ CÔNG NGHỆ TP.HCM

http://www.cesti.gov.vn/

Dịch vụ Cung cấp Thông tin Trọn gói Tháng 10/2012 2/8


Replace: SO 7176-

23:2002; ISO 7176-

24:2004

for stair-climbing devices.

6 ISO 12492:2012 Rubber, raw - Determination of water content by Karl

Fischer method.

7

7 ISO 13175-3:2012 Implants for surgery - Calcium phosphates - Part 3:

Hydroxyapatite and beta-tricalcium phosphate bone

substitutes.

13

8 ISO 7148-2:2012

Replace: ISO 7148-

2:1999

Plain bearings - Testing of the tribological behaviour of

bearing materials - Part 2: Testing of polymer-based

bearing materials.

25

9 ISO 18738-1:2012

Replace: ISO

18738:2003

Measurement of ride quality - Part 1: Lifts (elevators). 18

10 ISO 4164:2012

Replace: ISO

4164:1978

Mopeds - Engine test code - Net power. 19

11 ISO 16145-2:2012 Ships and marine technology - Protective coatings and

inspection method - Part 2: Void spaces of bulk carriers

and oil tankers.

38


inspection method - Part 1: Dedicated sea water ballast

tanks.

40


inspection method - Part 3: Cargo oil tanks of crude oil

tankers.

40

14 ISO 16121-1:2012

Replace: ISO 16121-

1:2005

Road vehicles - Ergonomic requirements for the driver's

workplace in line-service buses - Part 1: General

description, basic requirements.

14

15 ISO 12176-1:2012

Replace: ISO 12176-

1:2006

Plastics pipes and fittings - Equipment for fusion

jointing polyethylene systems - Part 1: Butt fusion.

20

16 ISO 6556:2012

Replace: ISO

6556:1981

Laboratory glassware - Filter flasks. 9

17 ISO/TS 16479:2012 Thermoplastics pipes for the conveyance of fluids -

Determination of the slow cracking resistance of pipes

and fittings using the Notched Ring Test (NRT).

21

18 ISO 9334:2012 Optics and photonics - Optical transfer function - 34

http://www.iso.org/iso/home/store/catalogue_ics/catalogue_detail_ics.htm?csnumber=31276



















Replace: ISO

9334:2007

Definitions and mathematical relationships.

19 ISO/TS 18234-

8:2012

Intelligent transport systems - Traffic and travel

information via transport protocol experts group,

generation 1 (TPEG1) binary data format - Part 8:

Congestion and Travel Time application (TPEG1-CTT).

20

20 ISO 13297:2012

Replace: ISO

13297:2000

Small craft - Electrical systems - Alternating current

installations.

27

21 ISO/TR 11225:2012 Space environment (natural and artificial) - Guide to

reference and standard atmosphere models.

107

22 ISO/TS 19158:2012 Geographic information - Quality assurance of data

supply.

22

23 ISO 3676:2012

Replace: ISO

3676:1983

Packaging - Complete, filled transport packages and

unit loads - Unit load dimensions.

5

24 IEC/TS 62622:2012 Artificial gratings used in nanotechnology - Description

and measurement of dimensional quality parameters.

34

25 ISO 13849-2:2012

Replace: ISO 13849-

2:2003

Safety of machinery - Safety-related parts of control

systems - Part 2: Validation.

79

26 ISO 12575-1:2012 Thermal insulation products - Exterior insulating

systems for foundations - Part 1: Material specification.

11

27 ISO 14188:2012 Metallic and other inorganic coatings - Test methods for

measuring thermal cycle resistance and thermal shock

resistance for thermal barrier coatings.

15

28 ISO 12013-1:2012 Paints and varnishes - Determination of curing

characteristics using a free damped oscillation method -

Part 1: Start temperature of the curing reaction.

10

29 ISO 12013-2:2012 Paints and varnishes - Determination of curing

characteristics using a free damped oscillation method -

Part 2: Glass transition temperature.

10

30 ISO/TR 16344:2012 Energy performance of buildings - Common terms,

definitions and symbols for the overall energy

performance rating and certification.

40

31 ISO 16548:2012 Ships and marine technology - Ship design - General

guidance on emergency towing procedures.

32

32 ISO/TR 17321-

2:2012

Graphic technology and photography - Colour

characterization of digital still cameras (DSCs) - Part 2:

18














Considerations for determining scene analysis

transforms.

33 ISO/IEC 10373-

6:2011/Amd 2:2012

Test methods for electromagnetic disturbance. 14

34 ISO 17467-3:2012

Replace: ISO 15439-

3:2007

Plastics piping systems for the supply of gaseous fuels -

Unplasticized polyamide (PA-U) piping systems jointed

by solvent cement - Part 3: Fittings.

6

35 ISO 17467-1:2012

Replace: ISO 15439-

1:2007

Plastics piping systems for the supply of gaseous fuels -

Unplasticized polyamide (PA-U) piping systems jointed

by solvent cement - Part 1: General.

23

36 ISO 1382:2012

Replace: ISO

1382:2008

Rubber – Vocabulary. 118

TIÊU CHUẨN IEC

1 IEC 60191-2-

am19 ed1.0

Amendment 19 – Mechanical standardization of

semiconductor devices - Part 2: Dimensions.

41

2 IEC 60364-5-55-

am1 ed2.0

Amendment 1 - Electrical installations of buildings -

Part 5-55: Selection and erection of electrical equipment

- Other equipment.

21

3 IEC 60601-2-

24 ed2.0

Medical electrical equipment - Part 2-24: Particular

requirements for the basic safety and essential

performance of infusion pumps and controllers.

123

4 IEC 60601-2-

66 ed1.0

Medical electrical equipment - Part 2-66: Particular

requirements for the basic safety and essential

performance of hearing instruments and hearing

instrument systems.

86

5 IEC 60688 ed3.0 Electrical measuring transducers for converting A.C.

and D.C. electrical quantities to analogue or digital

signals.

82

6 IEC 60893-3-4 ed2.1

Consol. with am1

Insulating materials - Industrial rigid laminated sheets

based on thermosetting resins for electrical purposes -

Part 3-4: Specifications for individual materials -

Requirements for rigid laminated sheets based on

phenolic resins.

29

7 IEC 60893-3-4-

am1 ed2.0

Amendment 1 - Insulating materials - Industrial rigid

laminated sheets based on thermosetting resins for

electrical purposes - Part 3-4: Specifications for

individual materials - Requirements for rigid laminated

8










sheets based on phenolic resins.

8 IEC 61326-2-

1 ed2.0

Electrical equipment for measurement, control and

laboratory use - EMC requirements - Part 2-1:

Particular requirements - Test configurations,

operational conditions and performance criteria for

sensitive test and measurement equipment for EMC

unprotected applications.

16

9 IEC 61326-2-

2 ed2.0




operational conditions and performance criteria for

portable test, measuring and monitoring equipment used

in low-voltage distribution systems.

17

10 IEC 61326-2-

5 ed2.0




operational conditions and performance criteria for field

devices with field bus interfaces according to IEC

61784-1.

33

11 IEC 61360-2 ed3.0 Standard data element types with associated

classification scheme for electric components - Part 2:

EXPRESS dictionary schema.

355

12 IEC 61753-091-

2 ed1.0

Fibre optic interconnecting devices and passive

components - Performance standard - Part 091-2: Non-

connectorized single-mode fibre optic pigtailed

circulators for category C - Controlled environments.

24

13 IEC 61993-2 ed2.0 Maritime navigation and radiocommunication

equipment and systems - Automatic identification

systems (AIS) - Part 2: Class A shipborne equipment of

the automatic identification system (AIS) - Operational

and performance requirements, methods of test and

required test results.

129

14 IEC 62271-

101 ed2.0

High-voltage switchgear and controlgear - Part 101:

Synthetic testing.

332

15 IEC 62276 ed2.0 Single crystal wafers for surface acoustic wave (SAW)

device applications - Specifications and measuring

methods.

82

16 IEC 62282-6-

100 ed1.1 Consol.

Fuel cell technologies - Part 6-100: Micro fuel cell

power systems – Safety.

386



with am1

17 IEC 62282-6-100-

am1 ed1.0

Amendment 1 - Fuel cell technologies - Part 6-100:

Micro fuel cell power systems – Safety.

35

18 IEC/TR 62351-

10 ed1.0

Power systems management and associated information

exchange - Data and communications security - Part 10:

Security architecture guidelines.

49

19 IEC 62358 ed2.0 Ferrite cores - Standard inductance factor for gapped

cores and its tolerance.

36

20 IEC 62551 ed1.0 Analysis techniques for dependability - Petri net

techniques.

136

21 IEC/TS 62622 ed1.0 Nanotechnologies - Description, measurement and

dimensional quality parameters of artificial gratings.

40

22 IEC/TR 62635 ed1.0 Guidelines for end-of-life information provided by

manufacturers and recyclers and for recyclability rate

calculation of electrical and electronic equipment .

32

23 IEC/TS 62644 ed1.0 Professional video storage equipment - Guideline of

time code transmission.

10

24 IEC 62674-1 ed1.0 High frequency inductive components - Part 1: Fixed

surface mount. inductors for use in electronic and

telecommunication equipment Pages: 62.

25 ISO/IEC 9995-7-

am1 ed1.0

Amendment 1 - Information technology - Keyboard

layouts for text and office systems - Part 7: Symbols

used to represent functions .

13

26 ISO/IEC 10373-6-

am2 ed1.0

Amendment 2 - Identification cards - Test methods -

Part 6: Proximity cards - Test methods for

electromagnetic disturbance.

14

27 ISO/IEC 11693-

1 ed1.0

Identification cards - Optical memory cards - Part 1:

General characteristics .

4

28 ISO/IEC 11694-

1 ed4.0

Identification cards - Optical memory cards - Linear

recording method - Part 1: Physical characteristics.

2

29 ISO/IEC/TR 13066-

2 ed1.0

Information technology - Interoperability with Assistive

Technology (AT) - Part 2: Windows accessibility

application programming interface (API).

94

30 ISO/IEC 14651-

am1 ed1.0

Amendment 1 - Information technology - International

string ordering and comparison - Method for comparing

character strings and description of the common

template tailorable ordering .

2

31 ISO/IEC

25041 ed1.0

Systems and software engineering - Systems and

software Quality Requirements and Evaluation

52



(SQuaRE) - Evaluation guide for developers, acquirers

and independent evaluators.

32 ISO/IEC

27013 ed1.0

Information technology - Security techniques -

Guidance on the integrated implementation of ISO/IEC

27001 and ISO/IEC 20000-1.

38

33 ISO/IEC

27037 ed1.0

Information technology - Security techniques -

Guidelines for identification, collection, acquisition and

preservation of digital evidence.

38

34 ISO/IEC

40500 ed1.0

Information technology - W3C Web Content

Accessibility Guidelines (WCAG) 2.0.

2

TIÊU CHUẨN ASTM

1 ASTM A1058 Standard Test Methods for Mechanical Testing of Steel

Productsmdash;Metric.

11

2 ASTM C76 Standard Specification for Reinforced Concrete

Culvert, Storm Drain, and Sewer Pipe.

11

3 ASTM C76M Standard Specification for Reinforced Concrete

Culvert, Storm Drain, and Sewer Pipe (Metric).

11

4 ASTM C506 Standard Specification for Reinforced Concrete Arch

Culvert, Storm Drain, and Sewer Pipe.

7

5 ASTM C506M Standard Specification for Reinforced Concrete Arch

Culvert, Storm Drain, and Sewer Pipe (Metric).

7

6 ASTM C507 Standard Specification for Reinforced Concrete

Elliptical Culvert, Storm Drain, and Sewer Pipe.

9

7 ASTM C507M Standard Specification for Reinforced Concrete

Elliptical Culvert, Storm Drain, and Sewer Pipe

(Metric).

10

8 ASTM C655M Standard Specification for Reinforced Concrete D-

Load Culvert, Storm Drain, and Sewer Pipe (Metric).

6

9 ASTM C655 Standard Specification for Reinforced Concrete D-

Load Culvert, Storm Drain, and Sewer Pipe.

6

10 ASTM C890 Standard Practice for Minimum Structural Design

Loading for Monolithic or Sectional Precast Concrete

Water and Wastewater Structures.

5

11 ASTM C1240 Standard Specification for Silica Fume Used in

Cementitious Mixtures.

7

12 ASTM D1048 Standard Specification for Rubber Insulating Blankets . 8

13 ASTM D1252 Standard Test Methods for Chemical Oxygen Demand

(Dichromate Oxygen Demand) of Water.

12



14 ASTM D5790 Standard Test Method for Measurement of Purgeable

Organic Compounds inWater by Capillary Column Gas

Chromatography/Mass Spectrometry.

58

15 ASTM D5847 Standard Practice for Writing Quality Control

Specifications for Standard Test Methods for Water

Analysis.

11

16 ASTM D6145 Standard Guide for Monitoring Sediment in

Watersheds.

10

17 ASTM D6146 Standard Guide for Monitoring Aqueous Nutrients in

Watersheds.

7

18 ASTM D6520 Standard Practice for the Solid Phase Micro Extraction

(SPME) of Water and its Headspace for the Analysis of

Volatile and Semi-Volatile Organic Compounds.

6

19 ASTM D6808 Standard Practice for Competency Requirements of

Reference Material Producers for Water Analysis.

12

20 ASTM D6874 Standard Test Methods for Nondestructive Evaluation

of Wood-Based Flexural Members Using Transverse

Vibration.

8

21 ASTM D6924 Standard Specification for Preformed Thermoplastic

Vulcanizate Elastomeric Joint Seals for Bridges.

4

22 ASTM D7404 Standard Test Method for Determination of Emulsified

Asphalt Residue by Moisture Analyzer.

3

LƯU Ý:

- Để có toàn văn các tiêu chuẩn trên hoặc các tiêu chuẩn khác, vui lòng liên hệ:

Phòng Cung cấp Thông tin - Trung tâm Thông tin Khoa học và Công nghệ.

ĐC: 79 Trương Định (Lầu 1), Quận 1, TP. Hồ Chí Minh.

ÐT: 08. 38243826 (Trực tiếp) - 38297040 (số nội bộ 202, 203).

Fax: 08. 38291957 - Email: [email protected]

- Đối với Tiêu chuẩn mới ban hành: Quý khách tự tr

các trung tâm Tiêu chuẩn.

Documents

Tiêu chuẩn, quy chuẩn kỹ thuật