TILT TRAILER GUIDE

TILT TRAILER GUIDE

T H E P R O F E S S I O N A L G R A D E S T A N D A R D

S I N G L E A X L E T I L T : ( T 1 ) | Q U I C K T I L T : ( T H )C H A N N E L T I L T S : ( T 5 ) , ( T F ) , ( T S ) , ( T 6 ) , ( T 7 ) | H D T I L T S : ( T J ) , ( T K )

D E C K O V E R T I L T S : ( T 8 ) , ( T 9 ) , ( T D )

S IN GL E AXLE T ILT

S I NG LE AXLE H D T ILT (T1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Q UIC K T ILT

83” H YD RAULIC QUICK T ILT (TH) . . . . . . . . . . . . . . . . . . . . . . . . . . . 5C HAN NE L T ILTS

5” C H ANNEL T ILT CARHAULER (T5) . . . . . . . . . . . . . . . . . . . . . . . 6P OW ERED FUL L T ILT (TF ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76” C H ANNEL SUP ER-WIDE T ILT (TS ) . . . . . . . . . . . . . . . . . . . . . 86” C H ANNEL EQUIPMENT T ILT (T6) . . . . . . . . . . . . . . . . . . . . . . . 98” C H ANNEL T ILT (T7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

HD T ILTS

HD EQUIPMENT T ILT 6” CHANNEL (TJ ) . . . . . . . . . . . . . . . . . . 11HD EQUIPMENT T ILT 8” CHANNEL (TK ) . . . . . . . . . . . . . . . . . 12

DECKOVER T ILTS

DECKOVER T ILT (T8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

HD DECKOVER T ILT (T9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

TANDEM DUAL T ILT (TD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

6” Channel Super-Wide Tilt (TS)

For decades , PJ f latdeck t ra i lers have been

known as the go-to for ser ious t ruckers and

industr ia l appl icat ions , and for good reason.

With industry- leading f rame warrant ies , top-

shel f components and the ab i l i ty to customize

with near- l imit less opt ion combinat ions , the

pros know who to come to for the i r profes-

s ional grade equipment . Inte l l igent ly des igned

with years of rea l-wor ld exper ience , PJ f latdeck

t ra i lers are bu i l t to work unt i l the job is done .

And i t ’s a l l backed by the b iggest independent

dealer network in North Amer ica , to support

you wherever the road goes . Contact your loca l

independent PJ Tra i lers dealer today for pr ic ing

and avai lab i l i ty.

ONE TRAILER, MULTIPLE USESThe T1 is a great all-around trailer for hauling small equipment, tractors, cars, UTVs, & more. It comes with a Dexter 7,000 lbs drop axle that allows you to haul approximately 5,000 lbs of cargo.

SINGLE AXLE HD TILT (T1)Lengths: 13’ - 16’

Length Axles Est. Base Weight†

13’ 1 x 7,000 lbs 1,920 lbs /871 kg

16’ 1 x 7,000 lbs 2,020 lbs /916 kg

† Weights are estimated for base trailer. PJ Trailers makes no guarantee regarding the accuracy of estimated weights.

STANDARD FEATURES

AVAILABLE OPTIONS* denotes a standard feature

• 7,000 lb. G.V.W.R.• 7,000 lb. x 1 G.A.W.R.• 2” Ball Adjustable Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (8,000 lb.)• 1 - Dexter E- Z lube Brake Drop Axle (7,000 lb)• 2 - 16” White Spoke Wheels• 2 - 235/80R16 Radial Tires (3,520 lb)• Stake Pockets

• Electric Breakaway Kit w/ Charger• Removable Tread-plate Steel Fenders• Expanded Metal Tool Tray In Tongue• 11 Degree Tilt Angle• Hydraulic Cushion Cylinder w/ Reservoir• 5” x 2” Steel Tube Frame• 5” Channel Tongue• 3” Channel Crossmembers 16” on Center• 2” Treated Pine Lumber Deck

• 81” x 13’ Tilting Deck• 81” Between Fenders• DOT Approved Flushmount Lifetime LED Lights• All-Weather Wiring Harness (7-way RV)• Knife Edge Tail• 4 Recessed D-rings & 1 Center D-ring• Bull Nose Bumper• Mitered Front Corners• 5 year Dexter Axle Warranty

COUPLER OPTIONSBP 2” Adjustable*BP 2 5/16” Adjustable3” Pintle Eye - Channel-mount (14,000 lb.)

AXLE OPTIONS7,000# (DEXTER)

(1) Electric (Drop Axle)*(1) Surge Hydraulic Drum [Surge Coupler] (Drop Axle)

7,000# W/14 PLY LR-G TIRES (DEXTER)(1) Electric (Drop Axle)(1) Surge Hydraulic Drum [Surge Coupler] (Drop Axle)

TAIL OPTIONSTilt Deck*

OTHER OPTIONSBlackwood Pro Full DeckBlackwood Pro Outer Deck1 Extra Pair Flushmount D-Rings on Steel Floor1 Pair D-Rings7 Pair D-RingsWeld on Fenders1 Pair Weld-On Strap RatchetsFull Size Divided Toolbox Upgrade (BP Only)1/2 x 1/2 Square Traction Bars on Rear of DeckSmittybilt Winch 9.5k w/Plate & BatteryWinch Plate w/ Welded Receiver HitchUpgrade to Single 10k Jack (Bumper Pull)Plate for Winch

Solar Battery Charger12”oc CrossmembersRough Oak FloorMount Only for Spare Tire11ga(1/8”)DP Steel Floor w/ 4 Flushmount D-Rings & 16”ocFront Toolbox (Bumper Pull & Pintle)Spare Tire and Mount (Bumper Pull)Roller on Front of Deck for Winch Cable

4

SELF-CONTAINED HYDRAULICSThe KTI Hydraulic Pump and Interstate Deep Cy-cle battery are housed in two toolboxes for pro-tection from the elements & road debris.

KNIFE-EDGE TAILOur 30” diamond plate knife-edge tail makes it super easy to load low clearance equipment like scissor lifts and fork lifts.

TRAILER NAME (XX)Lengths: XX’ - XX’


16’ 2 x 7,000 lbs 2,170 lbs /984 kg

18’ 2 x 7,000 lbs 2,270 lbs /1,030 kg

20’ 2 x 7,000 lbs 2,370 lbs /1,075 kg


STANDARD FEATURES


• 7,000 lb. G.V.W.R.• 3,500 lb. x 2 G.A.W.R.• Adjustable 2 5/16” Ball Bulldog Coupler• Safety Chains• 1 - Top Wind Drop-Leg Jack (8,000 lb.)• 2 Dexter E-Z lube Axles, Idler & Brake (3,500 lb)• 4 Leaf Double-eye Spring Suspension• 4 - 15” White Spoke Wheels• 4 - ST205/75R15 Radial Tires (1,820 lb)

• Electric Breakaway Kit w/ Charger• 9” x 72” Treadplate Aluminum Fenders• 5” Channel Frame & Tongue• 3” Channel Crossmembers 16” on Center• 2” Treated Canadian Spruce Pine Fir Deck• 83” Wide Deck• DOT Approved Flushmount Lifetime LED Lights• All-Weather Wiring Harness (7-way RV)• Sand Blasted, Acid Washed, Powder Coated

• Hydraulic Power Up & Down• Integrated 12V Trickle Charger• Stake Pockets• 5 year Dexter Axle Warranty

COUPLER OPTIONSBP 2” AdjustableBP 2 5/16” Adjustable*3” Pintle Eye - Channel-mount


(2) One Electric (Spring)*(2) Electric (Drop Axle)(2) Electric (Spring)

5,200# (DEXTER)(2) One Electric (Spring)(2) Electric (Spring)


OTHER OPTIONSBlackwood Pro Full DeckBlackwood Pro Outer Deck1 Extra Pair Flushmount D-Rings on Steel Floor1 Pair D-RingsPlate for Winch2 Stake Pockets In Front of TrailerSteel Diamond Plate FendersRubrail11ga(1/8”) DP Steel Floor w/4 Flushmount D-Rings & 16”ocMount Only for Spare TireSpare Tire and Mount

83” HYDRAULIC QUICK TILT (TH)Lengths: 16’ - 22’

5

DAMPENING SYSTEMThe dampening system for our tilts is not only ex-tremely rugged, but also easy to use.

DIAMOND PLATE APPROACH RAMPOur car hauler tilt tails have a “knife-edge” design, making them scissor/fork lift friendly.



16’ 2 x 3,500 lbs 2,440 lbs /1,107 kg

18’ 2 x 3,500 lbs 2,540 lbs /1,152 kg

20’ 2 x 3,500 lbs 2,720 lbs /1,234 kg


STANDARD FEATURES


• 7,000 lb. G.V.W.R.• 3,500 lb. x 2 G.A.W.R.• Adjustable 2 5/16” Ball Bulldog Coupler• Safety Chains• 1 - Top Wind Drop-Leg Jack (8,000 lb.)• 2 Dexter E-Z lube Axles, Idler & Brake (3,500 lb)• 4 Leaf Double-eye Spring Suspension• 4 - 15” White Spoke Wheels• 4 - ST205/75R15 Radial Tires (1,820 lb)• Stake Pockets & Rubrail

• Electric Breakaway Kit w/ Charger• 9” x 72” Treadplate Aluminum Fenders• 11 Degree Tilt Pitch• 5” Channel Frame & Tongue• 3” Channel Crossmembers 24” on Center• 2” Treated Pine Lumber Deck• 83” Wide Deck• 75” Wide Tiltable Deck• All-Weather Wiring Harness (7-way RV)• Sand Blasted, Acid Washed, Powder Coated

• DOT Approved Flushmount Lifetime LED Lights• 5 year Dexter Axle Warranty

COUPLER OPTIONSBP 2” A-FrameBP 2 5/16” A-FrameBP 2” AdjustableBP 2 5/16” Adjustable*BP 2” Atwood Style A-Frame CouplerBP 2 5/16” Atwood Style A-Frame Coupler3” Pintle Eye - Channel-mount


(2) One Electric (Spring)(2) Electric (Spring)*

5,200# (DEXTER)(2) One Electric (Spring)(2) Electric (Spring)(2) Surge Hydraulic Drum [Surge Coupler] (Spring)


OTHER OPTIONSBlackwood Pro Full DeckBlackwood Pro Outer Deck1 Extra Pair Flushmount D-Rings on Steel Floor1 Pair D-RingsFront Toolbox10k Jack (Bumper Pull)Plate for WinchUpgrade to 235/80 R16 on 52k AxlesSteel Diamond Plate Fenders

11ga(1/8”)DP Steel Floor w/4 Flushmount D-Rings & 16”ocMount Only for Spare TireSpare Tire and Mount16”oc CrossmembersRoller on Front of Deck for Winch Cable

5” CHANNEL TILT CARHAULER (T5)Lengths: 16’ - 22’

6

HYDRAULIC POWERED UP & DOWNOur Powered Full Tilt (TF) comes standard with a locking toolbox that encloses a KTI™ Hydraulic Pump & Interstate™ deep cycle battery. This self contained hydraulic unit powers twin 3” x 16” cyl-inders through HDt fittings and hoses to raise and lower the deck. This combination of professional grade components makes our tilt ready for years of reliable use.

KNIFE-EDGE TAILOur 30” diamond plate knife-edge tail makes it super easy to load low clearance equipment like scissor lifts and fork lifts. The tail lays flush to ground eliminating the “bump” other tilts have to drive over. This is especially useful when loading equipment with small wheels, winching vehicles on to the deck, or loading in wet/icy conditions.

POWERED FULL TILT (TF)Lengths: 18’ - 24’


18’ 2 x 7,000 lbs 3,420 lbs /1,551 kg

20’ 2 x 7,000 lbs 3,680 lbs /1,669 kg

22’ 2 x 7,000 lbs 4,000 lbs /1,814 kg

24’ 2 x 7,000 lbs 4,560 lbs /2,068 kg


STANDARD FEATURES


• 14,000 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• Adjustable 2 5/16” Ball Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (10,000 lb.)• 2 - Dexter E- Z lube Brake Axles (7,000 lb.)• Torsion Suspension• 4 - 16” White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)• Stake Pockets & Rubrail

• Electric Breakaway Kit w/ Charger• 9” x 72” Treadplate Removable Steel Fenders• Lockable Toolbox In Tongue• 6” Channel Frame & Tongue• 3” Channel Crossmembers 16” on Center• 2” Treated Pine Lumber Deck• 74” Wide Tiltable Deck• 82” Between Fenders• DOT Approved Flushmount Lifetime LED Lights• All-Weather Wiring Harness (7-way RV)

• Sand Blasted, Acid Washed, Powder Coated• Hydraulic Power Up & Down• Interstate (TM) Deep Cycle Battery• Twin 3” X 16” Cylinders• 110V Integrated Trickle Charger• GN Option Equipped with 2 Jacks• GN Equipped w/Lockable Front Toolbox• 3”x 16” w/o 8”ch. & 3” x 25” w/8”ch or 24’ lengths• 10 year Dexter Torflex Axle Warranty

COUPLER OPTIONSBP 2 5/16” Adjustable Rigid Mount (25,000 lb.)BP 2 5/16” Adjustable (14,000 lb.)*GN 2 5/16” Round (25,000 lb.) w/ ToolboxGN 2 5/16” Square (25,000 lb.) w/ ToolboxBP 2 5/16” Adj. Cplr w/HD 6 hole Chn Brkt (20k)


(2) Electric (Torsion)*(2) Surge Disc [Surge Coupler] (Torsion)(2) Surge Hydraulic Drum [Surge Coupler] (Torsion)(3) Electric (Torsion)

7,000# W/14 PLY LR-G TIRES (DEXTER)(2) Electric (Torsion)


OTHER OPTIONSBlackwood Pro Full DeckBlackwood Pro Outer Deck1 Extra Pair Flushmount D-Rings on Steel Floor1 Pair D-RingsPower Up/Down & Gravity Down UpgradeLight Bar w/4 Lights1 Pair Weld-On Strap RatchetsTop Riser ToolboxFull Size Divided Toolbox Upgrade (BP Only)1/2 x 1/2 Square Traction Bars on Rear of DeckPlate for Winch

Solar Battery Charger6” Taller GN Riser9,990 G.V.W.R.12”oc CrossmembersRough Oak Floor2nd Jack (Bumper Pull)Mount Only for Spare TireDiamond Plate Running Boards11ga(1/8”)DP Steel Floor w/4 Flushmount D-Rings & 12”ocSpare Tire and Mount (Bumper Pull)Bulldog 2-speed Jacks (12,000 lb.)Roller on Front of Deck for Winch Cable

HYDRAULIC CUSHIONED GRAVITY TILT With no battery or hydraulic pump to worry about, you can simply tilt the bed with a turn of the valve. The 3”x16” cylinder, reservoir and proportioning valve allows you to control the tilt rate.

SUPER-WIDE DECK & DRIVE-OVER 1/4” DIAMOND PATE STEEL FENDERSThe 102” rail to rail deck width of the TS makes it an excellent choice for hauling 4x4s, rock crawlers, trucks, and other vehicles that exceed the typical 83” deck width.

The TS also features 1/4” diamond plate steel fenders, allowing you to use the full 102” width of the deck and drive your equipment or oversized vehicles right over them!

COUPLER OPTIONSBP 2 5/16” Adjustable*3” Pintle Eye - Channel-mount (21,000 lb.)


(2) Electric (Torsion)*(2) Surge Hydraulic Drum [Surge Coupler] (Torsion)

7,000# W/14 PLY LR-G TIRES (DEXTER)(2) Electric (Torsion)

TAIL OPTIONS16’ Tilt Deck*

OTHER OPTIONSBlackwood Pro Full DeckBlackwood Pro Outer DeckGN Lockable Chain Holder1 Extra Pair Flushmount D-Rings on Steel Floor1 Pair D-RingsFork Rack (18’ and Longer)1 Hydraulic Monster Jack™ Includes Front Toolbox2 Hydraulic Monster Jacks™Light Bar w/4 Lights1 Pair Weld-On Strap RatchetsTop Riser Toolbox1/2 x 1/2 Square Traction Bars on Rear of DeckPlate for Winch6” Taller GN Riser9,990 G.V.W.R.Battery ChargerSolar Battery Charger

12”oc CrossmembersRough Oak Floor2nd Jack (Bumper Pull)Power up Power down TiltPower Up/Down & Gravity DownMount Only for Spare Tire11ga(1/8”)DP Steel Floor w/4 Flushmount D-Rings & 12”ocFront Toolbox (Bumper Pull & Pintle)Spare Tire and Mount (Bumper Pull)Bulldog 2-speed Jacks (12,000 lb.)Roller on Front of Deck for Winch Cable

6” CHANNEL SUPER-WIDE TILT (TS)Lengths: 18’ - 24’


18’ 2 x 7,000 lbs 3,600 lbs /1,633 kg

20’ 2 x 7,000 lbs 3,920 lbs /1,778 kg

22’ 2 x 7,000 lbs 4,260 lbs /1,932 kg

24’ 2 x 7,000 lbs 4,580 lbs /2,077 kg


STANDARD FEATURES


• 14,000 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• 2 5/16” Ball Adjustable Coupler• Safety Chains• 1 - Drop Leg Jack (10,000 lb.)• 2 - Dexter E- Z lube Brake Axles (7,000 lb.)• Torsion Suspension• 4 - 16” White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb.)

• Stake Pockets & Rubrail• Electric Breakaway Kit w/ Charger• Drive Over DP Steel Fenders• 11 Degree Tilt Pitch• 3” x 16” Cylinder• 6” Channel Frame & Tongue• 3” Channel Crossmembers 16” on Center• 2” Treated Pine Lumber Deck• 102” Wide Tiltable Deck

• 80½” Between Fenders• DOT Approved Flushmount Lights• All-Weather Wiring Harness (7-way RV)• Sand Blasted, Acid Washed, Powder Coated• 10 year Dexter Torflex Axle Warranty

8

HYDRAULIC CUSHIONED GRAVITY TILT With no battery or hydraulic pump to worry about, you can simply tilt the bed with a turn of the valve. The 3”x16” cylinder, reservoir and proportioning valve allows you to control the tilt rate.

KNIFE-EDGE TAILOur 30” diamond plate knife-edge tail makes it super easy to load low clearance equipment like scissor lifts and fork lifts. The tail lays flush to ground eliminating the “bump” other tilts have to drive over. This is especially useful when loading equipment with small wheels, winching vehicles on to the deck, or loading in wet/icy conditions.



16’ 2 x 7,000 lbs 3,060 lbs /1,388 kg

18’ 2 x 7,000 lbs 3,240 lbs /1,470 kg

20’ 2 x 7,000 lbs 3,420 lbs /1,551 kg

22’ 2 x 7,000 lbs 3,600 lbs /1,633 kg

24’ 2 x 7,000 lbs 3,780 lbs /1,715 kg


STANDARD FEATURES


• 14,000 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• Adjustable 2 5/16” Ball Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (10,000 lb.)• 2 - Dexter E- Z lube Brake Axles (7,000 lb.)• Torsion Suspension• 4 - 16” White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)

• Stake Pockets & Rubrail• Electric Breakaway Kit w/ Charger• 9” x 72” Treadplate Removable Steel Fenders• Tool Tray In Tongue• 11 Degree Tilt Pitch• 3” x 16” Cylinder• 6” Channel Frame & Tongue• 3” Channel Crossmembers 16” on Center• 2” Treated Pine Lumber Deck

• 74” Wide Tiltable Deck• 82” Between Fenders• DOT Approved Flushmount Lifetime LED Lights• All-Weather Wiring Harness (7-way RV)• Sand Blasted, Acid Washed, Powder Coated• GN Option Equipped with 2 Jacks• GN Equipped w/Lockable Front Toolbox• 10 year Dexter Torflex Axle Warranty

COUPLER OPTIONSBP 2 5/16” Adjustable Rigid Mount (25,000 lb.)BP 2 5/16” Adjustable (14,000 lb.)*3” Pintle Eye - Channel-mountGN 2 5/16” Round (25,000 lb.) w/ ToolboxGN 2 5/16” Square (25,000 lb.) w/ ToolboxBP 2 5/16” Adj. Cplr w/HD 6 hole Chn Brkt (20k)


(2) Electric (Torsion)*(2) Surge Disc [Surge Coupler] (Torsion)(2) Surge Hydraulic Drum [Surge Coupler] (Torsion)(3) Electric (Torsion)

7,000# W/14 PLY LR-G TIRES (DEXTER)(2) Electric (Torsion)(3) Electric (Torsion)


OTHER OPTIONSBlackwood Pro Full DeckBlackwood Pro Outer DeckGN Lockable Chain Holder1 Extra Pair Flushmount D-Rings on Steel Floor1 Pair D-RingsFork Rack (18’ and Longer)1 Hydraulic Monster Jack™ Includes Front Toolbox2 Hydraulic Monster Jacks™Light Bar w/4 Lights1 Pair Weld-On Strap Ratchets

Top Riser Toolbox1/2 x 1/2 Square Traction Bars on Rear of DeckPlate for Winch6” Taller GN Riser9,990 G.V.W.R.Solar Battery Charger12”oc CrossmembersRough Oak Floor2nd Jack (Bumper Pull)Power up Power down TiltPower Up/Down & Gravity DownMount Only for Spare Tire11ga(1/8”)DP Steel Floor w/4 Flushmount D-Rings & 12”ocFront Toolbox (Bumper Pull & Pintle)Spare Tire and Mount (Bumper Pull)Bulldog 2-speed Jacks (12,000 lb.)Roller on Front of Deck for Winch Cable

6” CHANNEL EQUIPMENT TILT (T6)Lengths: 16’ - 24’

9

KNIFE EDGED TAILOur 30” diamond plate knife-edge tail makes it super easy to load low clearance equipment like scissor lifts and fork lifts.

8” CHANNEL FRAMEThe T7 tilt comes standard with a beefy 8” chan-nel frame. This significantly strengthens the en-tire frame, allowing for lengths up to 40 ft.

COUPLER OPTIONSBP 2 5/16” Adjustable (14,000 lb.)BP 2 5/16” Adjustable Rigid Mount (25,000 lb.)3” Pintle Eye - Channel-mount (20,000 lb.)GN 2 5/16” Round (25,000 lb.) w/ ToolboxGN 2 5/16” Square (25,000 lb.) w/ ToolboxBP 2 5/16” Adj. Cplr w/HD 6 hole Chn Brkt (20k)


(2) Electric (Torsion)*(2) Elec/Hyd Disc (1,600 PSI Pump) (Torsion)(3) Electric (Torsion)(3) Elec/Hyd Disc (1,600 PSI Pump) (Torsion)

7,000# W/215/75R17.5 LR-H SINGLES (DEXTER)(2) Electric (Torsion)

TAIL OPTIONS16’ Tilt Deck

OTHER OPTIONSBlackwood Pro Full DeckBlackwood Pro Outer Deck1 Extra Pair Flushmount D-Rings on Steel Floor1 Pair D-Rings1 Pair Weld-On Strap Ratchets1/2 x 1/2 Square Traction Bars on Rear of DeckPlate for Winch6” Taller GN Riser

9,990 G.V.W.R.12”oc CrossmembersRough Oak Floor2nd Jack (Bumper Pull)Mount Only for Spare Tire11ga(1/8”)DP Steel Floor w/4 Flushmount D-Rings & 12”ocFront Toolbox (Bumper Pull & Pintle)Spare Tire and Mount (Bumper Pull)Bulldog 2-speed Jacks (12,000 lb.)Roller on Front of Deck for Winch Cable

8” CHANNEL TILT (T7)Lengths: 16’ - 40’


16’ 2 x 7,000 lbs 3,650 lbs /1,656 kg

18’ 2 x 7,000 lbs 3,790 lbs /1,719 kg

20’ 2 x 7,000 lbs 3,880 lbs /1,760 kg

22’ 2 x 7,000 lbs 4,060 lbs /1,842 kg

24’ 2 x 7,000 lbs 4,250 lbs /1,928 kg

30’ 2 x 7,000 lbs 5,280 lbs /2,395 kg

32’ 2 x 7,000 lbs 5,500 lbs /2,495 kg


STANDARD FEATURES


• 14,000 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• Adjustable 2 5/16” Ball Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (10,000 lb.)• 2 - Dexter E- Z lube Brake Axles (7,000 lb.)• Torsion Suspension• 4 - 16” White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)

• Stake Pockets & Rubrail• Electric Breakaway Kit w/ Charger• 9” x 72” Treadplate Removable Steel Fenders• 13 Degree Tilt Pitch• Tool Tray In Tongue• 3” x 16” Cylinder• 8” Channel Frame & Tongue• 3” Channel Crossmembers 16” on Center• 2” Treated Pine Lumber Deck

• 74” Wide Tiltable Deck• 82” Between Fenders• DOT Approved Flushmount Lifetime LED Lights• All-Weather Wiring Harness (7-way RV)• Sand Blasted, Acid Washed, Powder Coated• GN Option Equipped with 2 Jacks• GN Equipped w/Lockable Front Toolbox• 10 year Dexter Torflex Axle Warranty

10

KNIFE EDGED TAILOur 30” diamond plate knife-edge tail makes it super easy to load low clearance equipment like scissor lifts and fork lifts.

LOW LOAD ANGLESThe use of torsion axles and our unique frame de-sign allow us to keep our deck heights low, giving us extremely low load angles.

HD EQUIPMENT TILT 6” CHANNEL (TJ)Lengths: 16’ - 24’


16’ 2 x 7,000 lbs 3,880 lbs /1,760 kg

18’ 2 x 7,000 lbs 3,950 lbs /1,792 kg

20’ 2 x 7,000 lbs 4,100 lbs /1,860 kg

22’ 2 x 7,000 lbs 4,250 lbs /1,928 kg

24’ 2 x 7,000 lbs 4,350 lbs /1,973 kg


STANDARD FEATURES


• 16,000 lb. G.V.W.R.• 8,000 lb. x 2 G.A.W.R.• HD 2 5/16” Adjustable 3 Bolt Coupler• Safety Chains• 1 - Drop Leg Jack (10,000 lb.)• 2 - Dexter Oil Bath Brake Axles (8,000 lb.)• Dexter Torflex® Torsion Suspension• 4 - 16” White Spoke Wheels• 4 - 235/80R16 14 Ply Radial Trs (4,080 lb)

• Stake Pockets & Rubrail• Electric Breakaway Kit w/ Charger• 10” x 72” Treadplate Removable Steel Fenders• Tool Tray In Tongue• 12 Degree Tilt Pitch• 3” x 16” Cylinder• 6” Channel Frame & Tongue• 3” Channel Crossmembers 16” on Center• 2” Treated Pine Lumber Deck

• 82” Wide Tiltable Deck• 81.5” Between Fenders• DOT Approved Flushmount Lifetime LED Lights• All-Weather Wiring Harness (7-way RV)• Sand Blasted, Acid Washed, Powder Coated• GN Option Equipped with 2 Jacks• GN Equipped w/Lockable Front Toolbox• 10 year Dexter Torflex Axle Warranty

COUPLER OPTIONSBP 2 5/16” Adj. Cplr w/8 Hole Chn Brckt (20k)BP 2 5/16” Adjustable Rigid Mount (25,000 lb.)Rigid Mount Pintle Eye- Face-mount (25,000)3” Pintle Eye - Channel-mount (20,000 lb.)GN 2 5/16” Round (25,000 lb.) w/ ToolboxGN 2 5/16” Square (25,000 lb.) w/ ToolboxBP 2 5/16” Adj. Cplr w/HD 6 hole Chn Brkt (20k)*3” Pintle Eye Chan Mnt (20k lb.) w/8 Hole Ch BrcktBP 2 5/16” Adj. (14,000 lb.) w/8 Hole Chan Bracket


(2) Electric (Torsion)7,000# W/14 PLY LR-G TIRES (DEXTER)

(2) Electric (Torsion)8,000# OIL BATH W/14 PLY LR-G TIRES (DEXTER)

(2) Electric (Torsion)*8,000# OIL BATH AXLES, 235/80 LR-E TIRES (DEXTER)

(2) Electric (Torsion)8,000# OIL BATH W/215/75R17.5 LR-H SINGLES(DEXTER)

(2) Electric (Torsion)


OTHER OPTIONSBlackwood Pro Full DeckBlackwood Pro Outer Deck

GN Lockable Chain HolderRemovable Deck on the Neck (102” Wide 96” Long)1 Pair D-RingsFork Rack (20’ and Longer)Upgrade to (1) - Single BULLDOG 10k JackUpgrade to (2) - Dual BULLDOG 10k JacksGN Light Bar w/4 Lights (GN Only)Top Riser Toolbox1/2 x 1/2 Square Traction Bars on Rear of DeckPlate for Winch6” Taller GN Riser9,990 G.V.W.R.Solar Battery Charger12”oc CrossmembersRough Oak Floor2nd Jack (Bumper Pull)Power up Power down TiltPower Up/Down & Gravity DownMount Only for Spare Tire11ga(1/8”)DP Steel Floor w/4 Flushmount D-Rings & 12”ocFront Toolbox (Bumper Pull & Pintle)Spare Tire and Mount (Bumper Pull)Bulldog 2-speed Jacks (12,000 lb.)Roller on Front of Deck for Winch Cable

11

LOW LOAD ANGLESThe use of torsion axles and our unique frame de-sign allow us to keep our deck heights low, giving us extremely low load angles.

HYDRAULIC CUSHIONED GRAVITY TILTOur gravity tilts use a hydraulic cylinder, reservoir, and proportioning valve to control the rate the trailer tilts.

HD EQUIPMENT TILT 8” CHANNEL (TK)Lengths: 16’ - 40’


20’ 2 x 7,000 lbs 4,259 lbs /1,932 kg

22’ 2 x 7,000 lbs 4,350 lbs /1,973 kg

24’ 2 x 7,000 lbs 4,580 lbs /2,077 kg

26’ 2 x 7,000 lbs 4,760 lbs /2,159 kg

28’ 2 x 7,000 lbs 5,680 lbs /2,576 kg

36’ 2 x 8,000 lbs 7,420 lbs /3,366 kg


STANDARD FEATURES


• 16,000 lb. G.V.W.R.• 8,000 lb. x 2 G.A.W.R.• HD 2 5/16” Adjustable 3 Bolt Coupler• Safety Chains• 1 - Drop Leg Jack (10,000 lb.)• 2 - Dexter Oil Bath Brake Axles (8,000 lb.)• Dexter Torflex® Torsion Suspension• 4 - 16” White Spoke Wheels• 4 - 235/80R16 14 Ply Radial Trs (4,080 lb)• Stake Pockets & Rubrail• Electric Breakaway Kit w/ Charger

• 10” x 72” Treadplate Removable Steel Fenders• Tool Tray In Tongue• 12 Degree Tilt Pitch• 3” x 16” Cylinder• 8” Channel Frame & Tongue• 3” Channel Crossmembers 16” on Center• 2” Treated Pine Lumber Deck• 82” Wide Tiltable Deck• 82” Between Fenders• DOT Approved Flushmount Lifetime LED Lights• All-Weather Wiring Harness (7-way RV)

• Sand Blasted, Acid Washed, Powder Coated• GN Option Equipped with 2 Jacks• 10 year Dexter Torflex Axle Warranty • GN Equipped w/Lockable Front Toolbox

COUPLER OPTIONSBP 2 5/16” Adj. Cplr w/HD 6 hole Chn Brkt (20k)*BP 2 5/16” Adjustable Rigid Mount (25,000 lb.)3” Pintle Eye - Channel-mount (20,000 lb.)GN 2 5/16” Round (25,000 lb.) w/ ToolboxGN 2 5/16” Square (25,000 lb.) w/ ToolboxBP 2 5/16” Adj. (14,000 lb.) w/8 Hole Chan Bracket3” Pintle Eye Chan Mnt (20k lb.) w/8 Hole Ch BrcktBP 2 5/16” Adj. Cplr w/8 Hole Chn Brckt (20k)


(3) Electric (Torsion)7,000# W/215/75R17.5 LR-H SINGLES (DEXTER)

(3) Electric (Torsion)7,000# W/14 PLY LR-G TIRES (DEXTER)

(3) Electric (Torsion)8,000# OIL BATH AXLES, 235/80 LR-E TIRES (DEXTER)

(2) Electric (Torsion)8,000# OIL BATH W/215/75R17.5 LR-H SINGLES(DEXTER)

(2) Electric (Torsion)8,000# OIL BATH W/14 PLY LR-G TIRES (DEXTER)

(2) Electric (Torsion)*


OTHER OPTIONSBlackwood Pro Full DeckBlackwood Pro Outer Deck1 Extra Pair Flushmount D-Rings on Steel Floor1 Pair D-RingsFork Rack (20’ and Longer)1 Hydraulic Monster Jack™ Includes Front Toolbox2 Hydraulic Monster Jacks™Top Riser ToolboxPlate for WinchSolar Battery Charger6” Taller GN Riser9,990 G.V.W.R.12”oc CrossmembersRough Oak Floor2nd Jack (Bumper Pull)Mount Only for Spare Tire11ga(1/8”)DP Steel Floor w/4 Flushmount D-Rings & 12”ocFront Toolbox (Bumper Pull & Pintle)Spare Tire and Mount (Bumper Pull)Bulldog 2-speed Jacks (12,000 lb.)Roller on Front of Deck for Winch Cable

12

DECKOVER TILT (T8)Lengths: 22’ - 28’


22’ 2 x 7,000 lbs 4,320 lbs /1,960 kg

26’ 2 x 7,000 lbs 4,860 lbs /2,204 kg

28’ 2 x 7,000 lbs 5,140 lbs /2,331 kg


STANDARD FEATURES


• 14,000 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• Adjustable 2 5/16” Ball Bulldog Coupler• Safety Chains• 1 - Drop Leg Jack (10,000 lb.)• 2 - Dexter E- Z lube Brake Axles (7,000 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 16” White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)• Rubrail & Stake Pockets• Electric Breakaway Kit w/ Charger

• DOT Reflective Tape• Tool Tray & Lockable Toolbox In Tongue• 8” x 10 lb. I-Beam Tongue• 8” x 10 lb. I-Beam Main Frame• 3” Channel Crossmembers 16” on Center• 2 x 6 x 1/8” Square Tubing Outer Deck Frame• 22’ Tilt Portion w/ 15 Degree Tilt Pitch• 2” Treated Pine Lumber Deck• 96” Wide Deck• DOT Approved Flushmount Lifetime LED Lights• All-Weather Wiring Harness (7-way RV)

• 12VDC Hydraulic Pump• 2 - 3” x 16” Hyd. Cylinders• 12’ Control Cable• Sand Blasted, Acid Washed, Powder Coated• Interstate (TM) Deep Cycle Battery• 110V Integrated Trickle Charger• GN Option Equipped with 2 Jacks• GN Equipped with Front Toolbox• GN Equipped with Chain Holder• 5 year Dexter Axle Warranty

COUPLER OPTIONSBP 2 5/16” Adjustable (14,000 lb.)BP 2 5/16” Adjustable Rigid Mount (25,000 lb.)3” Pintle Eye - Channel-mount (20,000 lb.)GN 2 5/16” Round (25,000 lb.) w/ ToolboxGN 2 5/16” Square (25,000 lb.) w/ ToolboxBP 2 5/16” Adj. Cplr w/HD 6 hole Chn Brkt (20k)


(2) Electric (Spring)*(2) Electric (Torsion)(2) Elec/Hyd Disc (1,600 PSI Pump) (Spring)(2) Elec/Hyd Disc (1,600 PSI Pump) (Torsion)

7,000# W/14 PLY LR-G TIRES (DEXTER)(2) Electric (Spring)(2) Electric (Torsion)(2) Elec/Hyd Disc (1,600 PSI Pump) (Spring)(2) Elec/Hyd Disc (1,600 PSI Pump) (Torsion)

8,000# OIL BATH AXLES, 235/80 LR-E TIRES (DEXTER)(2) Electric (Spring)

8,000# OIL BATH W/215/75R17.5 LR-H SINGLES(DEXTER)(2) Electric (Spring)(2) Electric (Torsion)(2) Elec/Hyd Disc (1,600 PSI Pump) (Spring)(2) Elec/Hyd Disc (1,600 PSI Pump) (Torsion)

8,000# OIL BATH W/14 PLY LR-G TIRES (DEXTER)(2) Electric (Spring)(2) Electric (Torsion)(2) Elec/Hyd Disc (1,600 PSI Pump) (Spring)(2) Elec/Hyd Disc (1,600 PSI Pump) (Torsion)

TAIL OPTIONS22’ Tilt*

OTHER OPTIONSBlackwood Pro Full DeckBlackwood Pro Outer DeckUpgrade to 8 Hole Channel Adjustable Coupler1 Extra Pair Flushmount D-Rings on Steel Floor1 Pair D-Rings2 Hydraulic Monster Jacks™Light Bar w/4 LightsPower Up/Down & Gravity Down Upgrade1 Pair Weld-On Strap RatchetsUnder Frame Spare Tire & Mnt.(Not Comp.w/17.5 T/W)Spare Tire and Mount (BP) 215/75/R17.5Top Riser Toolbox1/2 x 1/2 Square Traction Bars on Rear of DeckMonster Steps on Both SidesSolar Battery ChargerPlate for Winch

6” Taller GN RiserFull Size Divided Toolbox Upgrade (BP Only)9,990 G.V.W.R.Frame Bridge12”oc CrossmembersRough Oak Floor2nd Jack (Bumper Pull)Under Frame Tie Down Flat4” Ratchets every 4ft w/ Slide TrackMount Only for Spare Tire102” Deck WidthScissor Lift w/CylinderSpare Tire and Mount (Bumper Pull)Bulldog 2-speed Jacks (12,000 lb.)Spare Tire & Mount (Bumper Pull) G RatedRoller on Front of Deck for Winch Cable

I-BEAMF R A M E8”

13

HD DECKOVER TILT (T9)Lengths: 24’ - 36’


24’ 2 x 7,000 lbs 6,250 lbs /2,835 kg

26’ 2 x 7,000 lbs 6,322 lbs /2,868 kg

28’ 2 x 7,000 lbs 6,450 lbs /2,926 kg

30’ 2 x 7,000 lbs 6,750 lbs /3,062 kg


STANDARD FEATURES


• 15,680 lb. G.V.W.R.• 7,000 lb. x 2 G.A.W.R.• GN 2 5/16” Ball Bulldog Coupler 25,000 lb• Safety Chains• 2 - Drop Leg Jack (10,000 lb.)• 2 - Dexter E- Z lube Brake Axles (7,000 lb.)• 6 Leaf Slipper Spring Suspension• 4 - 16” White Spoke Wheels• 4 - 235/80R16 Radial Tires (3,520 lb)• Rubrail & Stake Pockets• Electric Breakaway Kit w/ Charger

• DOT Reflective Tape• Monster Steps on Both Sides• 3” Channel Crossmembers 16” on Center• 2 x 6 x 1/8” Square Tubing Outer Deck Frame• 24’ Tilt Portion w/ 17 Degree Tilt Pitch• 2” Treated Pine Lumber Deck• 12” x 14 lb. I-Beam Main Frame, Riser & Neck• 5” x 10.5” Hyd. Cylinder w/Scissor Lift• 102” Wide Deck• DOT Approved Flushmount Lifetime LED Lights• All-Weather Wiring Harness (7-way RV)

• 12VDC Hydraulic Pump• 12’ Control Cable• Sand Blasted, Acid Washed, Powder Coated• Interstate (TM) Deep Cycle Battery• 110V Integrated Trickle Charger• GN Option Equipped with 2 Jacks• GN Equipped with Front Toolbox• GN Equipped with Chain Holder• 5 year Dexter Axle Warranty

COUPLER OPTIONSGN 2 5/16” Round (25,000 lb.) w/ ToolboxBP 2 5/16” Adjustable Rigid Mount (25,000 lb.)3” Pintle Eye - Face-mount (36,000 lb.)GN 2 5/16” Square (25,000 lb.) w/ Toolbox


(2) Electric (Spring)*(2) Electric (Torsion)(2) Elec/Hyd Disc (1,600 PSI Pump) (Spring)(2) Elec/Hyd Disc (1,600 PSI Pump) (Torsion)(2) Surge Disc [Surge Coupler] (Spring)(2) Surge Hydraulic Drum [Surge Coupler] (Spring)(3) Electric (Spring)(3) Electric (Torsion)(3) Elec/Hyd Disc (1,600 PSI Pump) (Torsion)

7,000# W/14 PLY LR-G TIRES (DEXTER)(2) Electric (Spring)(2) Electric (Torsion)(2) Elec/Hyd Disc (1,600 PSI Pump) (Spring)(2) Elec/Hyd Disc (1,600 PSI Pump) (Torsion)(3) Electric (Spring)

8,000# OIL BATH AXLES, 235/80 LR-E TIRES (DEXTER)(2) Electric (Spring)(2) Electric (Torsion)

8,000# OIL BATH W/215/75R17.5 LR-H SINGLES(DEXTER)(2) Electric (Spring)

8,000# OIL BATH W/14 PLY LR-G TIRES (DEXTER)(2) Electric (Spring)(2) Electric (Torsion)(2) Elec/Hyd Disc (1,600 PSI Pump) (Spring)(2) Elec/Hyd Disc (1,600 PSI Pump) (Torsion)(3) Electric (Spring)

TAIL OPTIONS24’ Tilt*

OTHER OPTIONSBlackwood Pro Full DeckBlackwood Pro Outer Deck1 Extra Pair Flushmount D-Rings on Steel Floor1 Pair D-Rings2 Hydraulic Monster Jacks™Light Bar w/4 LightsMud Flaps Single Wheel Deckover1 Pair Weld-On Strap Ratchets1 Side-mount Toolbox 30”x14”

1 Side-mount Toolbox 72”x14”2 Extra Side Marker Lights, 1 Per SideTop Riser Toolbox1/2 x 1/2 Square Traction Bars on Rear of DeckSolar Battery ChargerPlate for Winch6” Taller GN RiserFull Size Divided Toolbox Upgrade (BP Only)9,990 G.V.W.R.Frame Bridge12”oc CrossmembersRough Oak FloorUnder Frame Tie Down Flat4” Ratchets every 4ft w/ Slide Track11ga (1/8”) DP Steel Floor w/ 4 D-Rings & 12”ocBulldog 2-speed Jacks (12,000 lb.)Roller on Front of Deck for Winch Cable

I-BEAMF R A M E12”

14

TANDEM DUAL TILT (TD)Lengths: 24’ - 40’


24’ 2 x 10,000 lbs 7,580 lbs /3,438 kg

28’ 2 x 10,000 lbs 8,080 lbs /3,665 kg

32’ 2 x 10,000 lbs 8,580 lbs /3,892 kg

36’ 2 x 10,000 lbs 9,080 lbs /4,119 kg

38’ 2 x 10,000 lbs 9,330 lbs /4,232 kg

40’ 2 x 10,000 lbs 9,600 lbs /4,354 kg


STANDARD FEATURES


• 25,000 lb. G.V.W.R.• 10,000 lb. x 2 G.A.W.R• GN 2 5/16” Ball Bulldog Coupler 25,000 lb• Safety Chains• 2 - Dropleg Jacks (10,000 lb.)• 2 - Dexter Oil Bath Axles (10,000 lb.)• Torsion Suspension• 8 Dual Wheels, 16” Grey, 8 on 6.5” Bolt Pattern• 8 - 16” 235/80R16 Radial Tires (3,090 lb)• Rubrail & Stake Pockets• Electric Breakaway Kit w/ Charger

• DOT Reflective Tape• Monster Steps on Both Sides• Lockable Front Toolbox w/Chain Holder• Self-rising Bumper• 24’ Tilt Portion w/ 15 Degree Tilt Pitch• 12VDC Hydraulic Pump• Scissor Lift• 12” x 19 lb. I-Beam Main Frame, Riser & Neck• 8” x 15 lb. I-lb. Deck Frame• 3” Channel Crossmembers 16” on Center• 2 x 6 x 1/8” Square Tubing Outer Deck Frame

• Frame Bridging on 30’ and Longer• 2” Treated Pine Lumber Deck• 102” Wide Deck• DOT Approved Flushmount Lifetime LED Lights• All-Weather Wiring Harness (7-way RV)• Sand Blasted, Acid Washed, Powder Coated• Interstate (TM) Deep Cycle Battery• 110V Integrated Trickle Charger• 5” x 17” Hyd. Cylinder w/Scissor Lift• 10 year Dexter Torflex Axle Warranty

COUPLER OPTIONSGN 2 5/16” Round (25,000 lb.) w/ Toolbox*BP 2 5/16” Adj Rigid Mount (25,000 lb.) w/TbxGN 2 5/16” Round (30,000 lb.) w/ 6” Longer TubeGN 2 5/16” Round (30,000 lb.) w/ Toolbox3” Pintle Eye - Face-mount (36,000 lb.) w/TbxGN 2 5/16” Square (30,000 lb.) w/ ToolboxGN 2 5/16” Square (25,000 lb.) w/ Toolbox

AXLE OPTIONS10,000# W/235/75R17.5” LR-J SINGLE T&W (DEXTER)

(2) Electric (Spring)(2) Electric (Torsion)(2) Elec/Hyd Disc (1,600 PSI Pump) (Spring)

10,000# AXLES (DEXTER)(2) Electric (Air Ride)(2) Electric (Spring)(2) Electric (Torsion)*(2) Elec/Hyd Disc (1,600 PSI Pump) (Air Ride)(2) Elec/Hyd Disc (1,600 PSI Pump) (Spring)

10,000# W/14 PLY LR-G DUAL T&W(DEXTER)(2) Electric (Spring)(2) Electric (Torsion)

12,000# AXLES (DEXTER)(2) Electric (Spring)(2) Elec/Hyd Disc (1,600 PSI Pump) (Air Ride)(2) Elec/Hyd Disc (1,600 PSI Pump) (Spring)

12,000# W/14 PLY LR-G DUAL T&W (DEXTER)(2) Electric (Spring)(2) Elec/Hyd Disc (1,600 PSI Pump) (Spring)

TAIL OPTIONS24’ Tilt Deck

OTHER OPTIONSBlackwood Pro Full DeckBlackwood Pro Outer Deck1 Extra Pair Flushmount D-Rings on Steel Floor1 Pair D-RingsHD 25k Jost 2x Jacks2 Hydraulic Monster Jacks™Light Bar w/4 Lights1 Pair Weld-On Strap Ratchets1 Side-mount Toolbox 45”x17½”1 Side-mount Toolbox 72”x17½”Solar Battery ChargerTop Riser Toolbox

1/2 x 1/2 Square Traction Bars on Rear of DeckHutch susp. H9700-Underslung Tandem AxlePlate for Winch6” Taller GN RiserUnder Frame Tie Down Flat22 lb. I-Beam Main Frame, Riser & Neck12”oc CrossmembersRough Oak Floor11ga (1/8”) DP Steel Floor w/ 4 D-Rings & 12”ocFrame BridgingBulldog 2-speed Jacks (12,000 lb.)Roller on Front of Deck for Winch Cable

I-BEAMF R A M E12”

15

TILT OPTIONS GUIDEPOWDER COAT COLOR OPTIONS:

COUPLER OPTIONS:

OTHER OPTIONS:

PJ TRAILERS• #1 Professional Grade Open Trailer Manufacturer• Broad Line of Dumps, Flatdecks, Utilities, Carhaulers, Tilts & Equipment Trailers• Over 300 Independent PJ Trailers Dealer Locations in the US & Canada

Visit Us Online at www.pjtrailers.com

BP 2 5/16” ADJ. CPLR W/HD 6 HOLE CHN BRKT (20K)

ROUGH OAK FLOOR

WINCH CABLE ROLLER

RUBRAIL WINCH 12VDC(12,000 LB)

12” ON-CENTERCROSSMEMBERS

FULL SIZE DIVIDEDTOOLBOX UPGRADE

(T8 & T9)

SOLAR CHARGER TRAILER WINCH(9.5K - 17.5K)

1X1 ANGLE TRACTIONBARS ON REAR OFDECK (T8, T9 & TD)

PALLET FORK HOLDERS(T6 & TF)

SLIDING STRAPRATCHETS

WELD ON STRAPRATCHETS

SIDE-MOUNTTOOLBOX

2 SPEED JACKS WINCH PLATE

REMOVABLE DECK ON THE NECK

SPARE TIREMOUNT

STEEL FLOOR &4 D-RINGS

1 PAIR D-RINGS

3” PINTLE EYE 8” I-BEAM GOOSENECK

ACTUAL COLOR MAY VARY, CHECK SPECIFIC MODEL PAGE FOR AVAILABLE COLORS

BLACK GREY DESERT TAN WHITE RED TRACTOR ORANGE

SOME OPTIONS NOT SHOWN, PLEASE VIEW PRODUCT PAGE FOR A LIST OF ALL OPTIONS

Documents

TILT TRAILER GUIDE