TIÊU CHUẨN MỚI THÁNG 05/2017lib.iuh.edu.vn/wp-content/uploads/2017/08/Bantin_Tieuchuan_05_2017.pdf · 50 BS ISO 15243:2017 Replace: BS ISO 15243:2004 Rolling bearings. Damage

TRƯỜNG ĐH CÔNG NGHIỆP TP. HỒ CHÍ MINH

TRUNG TÂM THÔNG TIN – THƯ VIỆN

TIÊU CHUẨN MỚI THÁNG 05/2017

TIÊU CHUẨN QUỐC GIA VIỆT NAM (TCVN) ................................................. 2

Điện gia dụng ........................................................................................................... 2

Đường sắt ................................................................................................................. 2

Luyện kim ................................................................................................................ 2

VĂN BẢN KỸ THUẬT ĐO LƯỜNG VIỆT NAM (ĐLVN) ................................. 2

Dầu mỏ ..................................................................................................................... 2

TIÊU CHUẨN NƯỚC NGOÀI ................................................................................ 2

Mỡ và dầu động vật và thực vật ............................................................................. 2

Vi sinh học thực phẩm – Thuốc lá…………………..…………………………… 2

Chất dẻo – Cao su …………………………………………………..…………….2

Dầu mỏ - Nhiên liệu ................................................................................................ 3

Hóa chất ................................................................................................................... 4

Công nghệ hạt nhân – Năng lượng .......................................................................... 5

Hệ thống giao thông thông minh - Đường sắt……….………………….…………5

Ô tô - Cơ khí – Chế tạo…………………………………………..….……………5

Động cơ đốt trong - Cần trục………………………………………..…………….6

Máy móc và Thiết bị nông nghiệp…………………………………..…………….7

Luyện kim – Sản phẩm kim loại ……………………………………..…………...7

Kỹ thuật điện - điện tử ........................................................................................... 10

Dây điện - Cáp điện - Vật liệu cách điện .............................................................. 11

Công nghệ thông tin………………………………………….….…………….…13

Quang học – Không gian ………………………………………..………………15

Xây dựng – Vật liệu xây dựng……………………………..………………….…15

Giày – Dệt – Vật liệu cách nhiệt……………………………..…………………..17

Gốm sứ ................................................................................................................... 17

Y tế - Chăm sóc sức khỏe.……………………………………….…………..…..17

Thiết bị giải trí…………………………………………….……….……………..18

Môi trường ............................................................................................................. 18

Đo lường – Phép đo – Thống kê…………………………………..…………..…19

Hệ thống tự động hóa công nghiệp – Biểu đồ điều khiển………..………………19

Page 2

TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4

TIÊU CHUẨN QUỐC GIA VIỆT NAM (TCVN)

Điện gia dụng Trở về đầu trang

1 TCVN 7828:2016 -Thay

thế: TCVN 7828:2013

Tủ lạnh, tủ kết đông lạnh. Hiệu suất năng lượng 9

2 TCVN 7829:2016 -Thay

thế: TCVN 7829:2013

Tủ lạnh, tủ mát và tủ đông. Phương pháp xác định

hiệu suất năng lượng

10

Đường sắt Trở về đầu trang

3 TCVN 11805:2017 Đường sắt đô thị. Hệ thống hãm. Yêu cầu kỹ thuật

và phương pháp thử

46

4 TCVN 11806:2017 Ứng dụng đường sắt. Độ thoải mái của hành

khách. Đo lường và đánh giá

72

Luyện kim Trở về đầu trang

5 TCVN 11791:2017 Thép kết cấu. Điều kiện kỹ thuật khi cung cấp

thép chịu ăn mòn khí quyển

40

VĂN BẢN KỸ THUẬT ĐO LƯỜNG VIỆT NAM (ĐLVN)

Dầu mỏ Trở về đầu trang

1 ĐLVN 10:2017 -Thay thế:

ĐLVN 10:2013

Cột đo xăng dầu. Quy trình kiểm định 19

2 ĐLVN 97:2017 Thay thế:

ĐLVN 97:2011

Cột đo xăng dầu. Quy trình thử nghiệm 27

TIÊU CHUẨN NƯỚC NGOÀI

Mỡ và dầu động vật và thực vật Trở về đầu trang

3 ISO

3656:2011/Amd.1:2017

Animal and vegetable fats and oils —

Determination of ultraviolet absorbance expressed

as specific UV extinction AMENDMENT 1

2

Vi sinh học thực phẩm – Thuốc lá Trở về đầu trang

4 ISO 22964:2017 Replace:

ISO/TS 22964:2006

Microbiology of the food chain — Horizontal

method for the detection of Cronobacter spp.

23


ISO 13276:1997

Tobacco and tobacco products — Determination

of nicotine purity — Gravimetric method using

tungstosilicic acid

6

Chất dẻo – Cao su Trở về đầu trang

6 ASTM F1698-02(2015)e1

Replace: ASTM F1698-

02(2015)

Standard Practice for Installation of Poly(Vinyl

Chloride)(PVC) Profile Strip Liner and

Cementitious Grout for Rehabilitation of Existing

Man-Entry Sewers and Conduits

6

Page 3

7 ASTM A1045-10(2017)

Replace: ASTM A1045-10

Standard Specification for Flexible Poly (Vinyl

Chloride) (PVC) Gaskets used in Connection of

Vitreous China Plumbing Fixtures to Sanitary

Drainage Systems

5

8 BS ISO 9370:2017 Replace:

BS ISO 9370:1997

Plastics. Instrumental determination of radiant

exposure in weathering tests. General guidance

and basic test method

28

9 ISO 20568-1:2017 Replace:

ISO 20568-1:2006

Plastics — Fluoropolymer dispersions and

moulding and extrusion materials — Part 1:

Designation system and basis for specifications

17

10 ISO 20568-2:2017 Replace:

ISO 20568-2:2006

Plastics — Fluoropolymer dispersions and

moulding and extrusion materials — Part 2:

Preparation of test specimens and determination

of properties

20

11 ISO 294-1:2017 Replace:

ISO 294-1:1996; ISO 294-1:

1996/Amd1:2001; ISO 294-

1: 1996/Amd2:2005

Plastics — Injection moulding of test specimens

of thermoplastic materials — Part 1: General

principles, and moulding of multipurpose and bar

test specimens

29

12 JIS Z 0609:2017 Plastic flat pallets using recycled containers and

packing

17

13 ISO 11852:2017 Replace:

ISO 11852:2011

Rubber — Determination of magnesium content

of field natural rubber latex by titration

7

14 ISO 19846:2017 Reclaimed rubber — Coding and classification

system

3

15 JIS K 6254:2016

Replace:JIS K 6254:2010

Rubber, vulcanized or thermoplastic.

Determination of stress-strain properties

28

Dầu mỏ - Nhiên liệu Trở về đầu trang

16 ASTM D4418-17 Replace:

ASTM D4418-00(2016)

Standard Practice for Receipt, Storage, and

Handling of Fuels for Gas Turbines

11

17 ASTM D6384-17 Replace:

ASTM D6384-11

Standard Terminology Relating to

Biodegradability and Ecotoxicity of Lubricants

3

18 BS EN 16942:2016 Fuels. Identification of vehicle compatibility.

Graphical expression for consumer information

40

19 BS ISO 12963:2017 Gas analysis. Comparison methods for the

determination of the composition of gas mixtures

based on one- and two-point calibration

42

20 BS ISO 14180:2017

Replace: BS ISO

14180:1998

Solid mineral fuels. Guidance on the sampling of

coal seams

32

Page 4

21 ISO 91:2017 Replace: ISO

91-1:1992; ISO 91-2:1991;

ISO 5024:1999; ISO

9770:1989

Petroleum and related products — Temperature

and pressure volume correction factors

(petroleum measurement tables) and standard

reference conditions

15

22 ISO 13357-1:2017 Replace:

ISO 13357-1:2002

Petroleum products — Determination of the

filterability of lubricating oils — Part 1:

Procedure for oils in the presence of water

12

23 ISO 13357-2:2017 Replace:

ISO 13357-2:2005

Petroleum products — Determination of the

filterability of lubricating oils — Part 2:

Procedure for dry oils

12

24 ISO 14180:2017 -Replace:

ISO 14180:1998

Solid mineral fuels — Guidance on the sampling

of coal seams

23

Hóa chất Trở về đầu trang

25 ASTM G136-03(2016)e1

Replace: ASTM G136-

03(2016)

Standard Practice for Determination of Soluble

Residual Contaminants in Materials by Ultrasonic

Extraction

6

26 ASTM D5632/D5632M -17

Replace: ASTM

D5632/D5632M-12e1

Standard Specification for Halon 1301,

Bromotrifluoromethane (CF3Br)

5

27 ASTM C454-10(2017)

Replace: ASTM C454-

83(2007)

Standard Test Method for Disintegration of

Carbon Refractories by Alkali

2

28 ASTM D2010/D2010M -

98(2017) Replace: ASTM

D2010/D2010M-98(2010)

Standard Test Methods for Evaluation of Total

Sulfation Activity in the Atmosphere by the Lead

Dioxide Technique

6

29 ISO 25947-1:2017 Fireworks — Categories 1, 2 and 3 — Part 1:

Terminology

7


Categories and types

10


Test methods

32


Requirements for construction and performance

23

33 ISO 19240:2017 Industrial valves — Lined metal quarter turn and

check valves for chemical process and related

industries

7

34 JIS B 8247:2016

Replace:JIS B 8247:2006

Formed head for pressure vessel 11

35 JIS Z 1903:2016 Replace:

JIS Z 1903:2011

Petrolatum paste and paste tapes for corrosion

protection

21

36 JIS K 0125:2016 Replace:

JIS K 0125:2011

Testing methods for volatile organic compounds

in industrial water and waste water

80

http://www.webstore.jsa.or.jp/webstore/Com/FlowControl.jsp?lang=en&bunsyoId=JIS+Z+1903%3A2016&dantaiCd=JIS&status=1&pageNo=0

Page 5

Công nghệ hạt nhân – Năng lượng Trở về đầu trang

37 IEC 61504:2017 Replace:

IEC 61504:2000

Nuclear facilities - Instrumentation and control

systems important to safety - Centralized systems

for continuous monitoring of radiation and/or

levels of radioactivity

59

38 IEC 62976:2017 Industrial non-destructive testing equipment -

Electron linear accelerator

46

39 ISO/ASTM 51205:2017

Replace:

ISO/ASTM 51205:2009

Practice for use of a ceric-cerous sulfate

dosimetry system

11

40 ISO/DIS 9060 Replace: ISO

9060:1990

Solar energy — Specification and classification

of instruments for measuring hemispherical solar

and direct solar radiation

21

Hệ thống giao thông thông minh - Đường sắt Trở về đầu trang

41 IEC 62486:2017 Replace:

IEC 62486:2010

Railway applications - Current collection systems

- Technical criteria for the interaction between

pantograph and overhead contactline (to achieve

free access)

106

42 ISO 29281-

1:2013/Amd.1:2017

Intelligent transport systems — Communication

access for land mobiles (CALM) — Non-IP

networking — Part 1: Fast networking &

transport layer protocol (FNTP) AMENDMENT

1

6

43 ISO 24102-

1:2013/Amd.1:2017

Intelligent transport systems — Communications

access for land mobiles (CALM) — ITS station

management — Part 1: Local management

AMENDMENT 1

4

44 ISO 24102-

3:2013/Amd.1:2017



management — Part 3: Service access points

AMENDMENT 1

30

45 ISO 24102-

4:2013/Amd.1:2017

Replace: ISO 24102-4:2013



management — Part 4: Station-internal

management communications AMENDMENT 1

13

46 ISO 24102-

5:2013/Amd.1:2017



management - Part 5: Fast service advertisement

protocol (FSAP) AMENDMENT 1

6

47 ISO/TS 20026:2017 Intelligent transport systems — Cooperative ITS

— Test architecture

26

Ô tô - Cơ khí – Chế tạo Trở về đầu trang

Page 6

48 ASTM A307-14e1 Replace:

ASTM A307-14

Standard Specification for Carbon Steel Bolts,

Studs, and Threaded Rod 60#x2009;000 PSI

Tensile Strength

6

49 BS ISO 4229:2017 Replace:

BS ISO 4229:2009

Assembly tools for screws and nuts. Single-head

engineer's wrenches for lower torque

applications. Maximum outside dimensions of

heads and test torques

12

50 BS ISO 15243:2017

Replace: BS ISO

15243:2004

Rolling bearings. Damage and failures. Terms,

characteristics and causes

62

51 IEC 61511-1/AMD1:2017

Replace: IEC 61511-

1:2016/COR1:2016

Amendment 1 - Functional safety - Safety

instrumented systems for the process industry

sector - Part 1: Framework, definitions, system,

hardware and application programming

requirements

6


ISO 4229:2009

Assembly tools for screws and nuts — Single-

head engineer's wrenches for lower torque

applications — Maximum outside dimensions of

heads and test torques

5

53 ISO 21940-2:2017 Replace:

ISO 21940-2:2001

Mechanical vibration — Rotor balancing — Part

2: Vocabulary

23


ISO 3580:2010

Welding consumables — Covered electrodes for

manual metal arc welding of creep-resisting

steels — Classification

24

55 JIS R 6001-1:2017 Bonded abrasives -- Determination and

designation of grain size distribution -- Part 1:

Macrogrits F4 to F220

17

56 JIS R 6001-2:2017 Bonded abrasives -- Determination and

designation of grain size distribution -- Part 2:

Microgrits

37


JIS Z 3158:2013

Method of y-groove weld cracking test 9


JIS Z 1604:2015

Plugs and flanges for steel drums 46


JIS Z 1601:2015

Tight head steel drums 18

60 JIS Z 3021:2016 Replace:JIS

Z 3021:2010

Welding and allied processes -- Symbolic

representation

54

Động cơ đốt trong - Cần trục Trở về đầu trang

61 ISO 4548-12:2017 Replace:

ISO 4548-12:2000

Methods of test for full-flow lubricating oil filters

for internal combustion engines — Part 12:

Filtration efficiency using particle counting and

contaminant retention capacity

32

Page 7

62 ISO 8566-5:2017 Replace:

ISO 8566-5:1992

Cranes — Cabins and control stations — Part 5:

Overhead travelling and portal bridge cranes

2

63 ISO 8686-5:2017 Replace:

ISO 8686-5:1992

Cranes — Design principles for loads and load

combinations — Part 5: Overhead travelling and

portal bridge cranes

28

Máy móc và Thiết bị nông nghiệp Trở về đầu trang

64 BS ISO 4251-1:2017

Replace: BS ISO 4251-

1:2005+A1:2012

Tyres (ply rating marked series) and rims for

agricultural tractors and machines. Tyre

designation and dimensions, and approved rim

contours

28

65 BS ISO 4251-2:2017 Tyres (ply rating marked series) and rims for

agricultural tractors and machines. Tyre load

ratings

24

66 ISO 4251-1:2017 Replace:

ISO 4251-2:2005


agricultural tractors and machines — Part 1: Tyre

designation and dimensions, and approved rim

contours

21

67 ISO 4251-2:2017 Replace:

ISO 4251-2:2005


agricultural tractors and machines — Part 2: Tyre

load ratings

17

68 ISO 4254-

12:2012/Amd.1:2017

Agricultural machinery — Safety — Part 12:

Rotary disc and drum mowers and flail mowers

AMENDMENT 1

1

69 ISO 5395-

2:2013/Amd.2:2017

Garden equipment — Safety requirements for

combustion-engine-powered lawnmowers — Part

2: Pedestrian-controlled lawnmowers

AMENDMENT 2: Cutting-means-enclosure

guards

4

70 ISO 5682-1:2017 Replace:

ISO 5682-1:1996

Equipment for crop protection — Spraying

equipment — Part 1: Test methods for sprayer

nozzles

35

71 ISO 5682-2:2017 Replace:

ISO 5682-2:1997


equipment — Part 2: Test methods to assess the

horizontal transverse distribution for hydraulic

sprayers

10

72 ISO 5682-3:2017 Replace:

ISO 5682-3:1995


equipment — Part 3: Test method to assess the

performance of volume/area adjustment systems

6

Luyện kim – Sản phẩm kim loại Trở về đầu trang

73 ASTM A27/A27M -17

Replace: ASTM

A27/A27M-13(2016)

Standard Specification for Steel Castings,

Carbon, for General Application

4

http://shop.bsigroup.com/ProductDetail?pid=000000000030279386




Page 8

74 ASTM A297/A297M-17

Replace: ASTM

A297/A297M-10

Standard Specification for Steel Castings, Iron-

Chromium and Iron-Chromium-Nickel, Heat

Resistant, for General Application

4

75 ASTM A473-17 Replace:

ASTM A473-16

Standard Specification for Stainless Steel

Forgings

5

76 ASTM A508/A508M-17

Replace: ASTM

A508/A508M-16

Standard Specification for Quenched and

Tempered Vacuum-Treated Carbon and Alloy

Steel Forgings for Pressure Vessels

9

77 ASTM A668/A668M-17

Replace: ASTM

A668/A668M-16

Standard Specification for Steel Forgings,

Carbon and Alloy, for General Industrial Use

10

78 ASTM A703/A703M-17

Replace: ASTM

A703/A703M-15e1

Standard Specification for Steel Castings,

General Requirements, for Pressure-Containing

Parts

12

79 ASTM A781/A781M -17 Standard Specification for Castings, Steel and

Alloy, Common Requirements, for General

Industrial Use

14

80 ASTM A788/A788M-17

Replace:

ASTMA788/A788M-16a

Standard Specification for Steel Forgings,

General Requirements

14

81 ASTM A958/A958M -17

Replace: ASTM

A958/A958M-15

Standard Specification for Steel Castings, Carbon

and Alloy, with Tensile Requirements, Chemical

Requirements Similar to Standard Wrought

Grades

5

82 ASTM B1005 -17 Standard Specification for Copper-Clad

Aluminum Bar for Electrical Purposes (Bus Bar)

5

83 ASTM B22/B22M-17

Replace: ASTM B22/B22M-

14

Standard Specification for Bronze Castings for

Bridges and Turntables

5

84 ASTM B353 -12(2017)

Replace: ASTM B353-12

Standard Specification for Wrought Zirconium

and Zirconium Alloy Seamless and Welded

Tubes for Nuclear Service (Except Nuclear Fuel

Cladding)

19

85 ASTM B49-17 Replace:

ASTM B49-15a

Standard Specification for Copper Rod for

Electrical Purposes

8

86 ASTM B600 -11(2017)

Replace: ASTM B600-11

Standard Guide for Descaling and Cleaning

Titanium and Titanium Alloy Surfaces

3

87 ASTM B62-17 Replace:

ASTM B62-09

Standard Specification for Composition Bronze

or Ounce Metal

3

88 ASTM E1921-17a Replace:

ASTM E1921-17

Standard Test Method for Determination of

Reference Temperature, To, for Ferritic Steels in

the Transition Range

27

Page 9

89 BS EN 13523-27:2017

Replace: BS EN 13523-

27:2009

Coil coated metals. Test methods. Resistance to

humid poultice (Cataplasm test)

12

90 BS ISO 16220:2017

Replace: BS ISO

16220:2005

Magnesium and magnesium alloys. Magnesium

alloy ingots and castings

26

91 BS EN 10222-2:2017


2:2000

Steel forgings for pressure purposes. Ferritic and

martensitic steels with specified elevated

temperatures properties

30

92 BS EN 10222-5:2017


5:2000

Steel forgings for pressure purposes. Martensitic,

austenitic and austenitic-ferritic stainless steels

32

93 ISO 3651-3:2017 Determination of resistance to intergranular

corrosion of stainless steels — Part 3: Corrosion

test for low-Cr ferritic stainless steels

8

94 ISO/IWA 19:2017 Guidance principles for the sustainable

management of secondary metals

51

95 ISO 16120-4:2017 Replace:

ISO 16120-4:2011

Non-alloy steel wire rod for conversion to wire

— Part 4: Specific requirements for wire rod for

special applications

11

96 JIS Z 8921:2016 Carbon nanotube composite resin coating film 8

97 JIS G 3118:2017 Replace:

JIS G 3118:2014

Carbon steel plates for pressure vessels for

intermediate and moderate temperature services

14

98 JIS G 4051:2016

Replace:JIS G 4051:2009

Carbon steels for machine structural use 22

99 JIS G 3505:2017 Replace:

JIS G 3505:2011

Low carbon steel wire rods 11

100 JIS G 3506:2017 Replace:

JIS G 3506:2013

High carbon steel wire rods 12

101 JIS G 4053:2016


Low-alloyed steels for machine structural use 20

102 JIS G 4904:2017 Replace:

JIS G 4904:2012

Seamless nickel-chromium-iron alloy heat

exchanger tubes

15

103 JIS G 4903:2017 Replace:

JIS G 4903:2012

Seamless nickel-chromium-iron alloy pipes 12

104 JIS Z 2550:2016 Replace:

JIS Z 2550:2009

Sintered metal materials -- Specifications 45

105 JIS G 4052:2016


Structural steels with specified hardenability

bands

43

106 JIS G 0802:2016


Ultrasonic examination of stainless steel plates 29



http://www.webstore.jsa.or.jp/webstore/Com/FlowControl.jsp?lang=en&bunsyoId=JIS+G+4904%3A2017&dantaiCd=JIS&status=1&pageNo=0

Page 10

Kỹ thuật điện - điện tử Trở về đầu trang

107 IEC 60034-1:2017 Replace:

IEC 60034-1:2010

Rotating electrical machines - Part 1: Rating and

performance

222

108 IEC 60445:2017 Replace:

IEC 60445:2010

Basic and safety principles for man-machine

interface, marking and identification -

Identification of equipment terminals, conductor

terminations and conductors

53

109 IEC 60728-13-1:2017

Replace: IEC 60728-13-

1:2012

Cable networks for television signals, sound

signals and interactive services - Part 13-1:

Bandwidth expansion for broadcast signal over

FTTH system

65

110 IEC 60884-2-

5:2017 Replace: IEC

60884-2-5:1995

Plugs and socket-outlets for household and similar

purposes - Part 2-5: Particular requirements for

adaptors

43

111 IEC 61071:2017 Replace:

IEC 61071:2007

Capacitors for power electronics 95

112 IEC 61360-1:2017 Replace:

IEC 61360-1:2009

Standard data elements types with associated

classification scheme - Part 1: Definitions -

Principles and methods

356

113 IEC 61643-32:2017 Low-voltage surge protective devices - Part 32:

Surge protective devices connected to the d.c. side

of photovoltaic installations - Selection and

application principles

92

114 IEC 62056-5-3:2017


3:2016

Electricity metering data exchange - The

DLMS/COSEM suite - Part 5-3: DLMS/COSEM

application layer

350

115 IEC 62056-6-1:2017


1:2015

Electricity metering data exchange - The

DLMS/COSEM suite - Part 6-1: Object

Identification System (OBIS)

94

116 IEC 62150-5:2017 Fibre optic active components and devices - Test

and measurement procedures - Part 5: Wavelength

channel tuning time of tuneable transmitters

28

117 IEC 62561-4:2017 Replace:

IEC 62561-4:2010

Lightning protection system components (LPSC) -

Part 4: Requirements for conductor fasteners

46

118 IEC 62561-5:2017 Replace:

IEC 62561-5:2011

Lightning protection system components (LPSC) -

Part 5: Requirements for earth electrode inspection

housings and earth electrode seals

35

119 IEC 62895:2017 High voltage direct current (HVDC) power

transmission - Cables with extruded insulation and

their accessories for rated voltages up to 320 kV

for land applications - Test methods and

requirements

136

Page 11

120 IEC 62920:2017 Photovoltaic power generating systems - EMC

requirements and test methods for power

conversion equipment

110

121 IEC TR 61282-15:2017 Fibre optic communication system design guides -

Part 15: Cable plant and link - Testing multi-fibre

optic cable plant terminated with MPO connectors

21

122 IEC TR 63072-1:2017 Photonic integrated circuits - Part 1: Introduction

and roadmap for standardization

46

123 IEC 62325-451-

3:2014+AMD1:2017


3:2014

Framework for energy market communications -

Part 451-3: Transmission capacity allocation

business process (explicit or implicit auction) and

contextual models for European market

934

124 IEC 60068-2-58/

AMD1:2017 Replace: IEC

60068-2-58:2015

Environmental testing - Part 2-58: Tests - Test Td:

Test methods for solderability, resistance to

dissolution of metallization and to soldering heat

of surface mounting devices (SMD)

8

125 IEC 62820-1-2:2017 Building intercom systems - Part 1-2: System

requirements - Building intercom systems using

the internet protocol

46

126 IEC 61788-22-1:2017 Superconductivity - Part 22-1: Superconducting

electronic devices - Generic specification for

sensors and detectors

28

127 ISO/TR 17321-3:2017 Graphic technology and photography — Colour

characterization of digital still cameras (DSCs) —

Part 3: User controls and readouts for scene-

referred imaging applications

5

128 JIS B 8622:2016 Replace:

JIS B 8622:2014

Absorption refrigerating machines 61

Dây điện - Cáp điện - Vật liệu cách điện Trở về đầu trang

129 IEC 60811-

201/AMD1:2017 Replace:

IEC 60811-201:2012

Amendment 1 - Electric and optical fibre cables -

Test methods for non-metallic materials - Part

201: General tests - Measurement of insulation

thickness

7

130 IEC 60811-


IEC 60811-202:2012



202: General tests - Measurement of thickness of

non-metallic sheath

7

131 IEC 60811-


IEC 60811-401:2012



401: Miscellaneous tests - Thermal ageing

methods - Ageing in an air oven

7

Page 12

132 IEC 60811-


IEC 60811-410:2012



410: Miscellaneous tests - Test method for copper-

catalyzed oxidative degradation of polyolefin

insulated conductors

7

133 IEC 60811-


IEC 60811-508:2012



508: Mechanical tests - Pressure test at high

temperature for insulation and sheaths

9

134 IEC 60811-


IEC 60811-509:2012



509: Mechanical tests - Test for resistance of

insulations and sheaths to cracking (heat shock

test)

9

135 IEC 60811-

511/AMD1:2017

Replace:IEC 60811-

511:2012



511: Mechanical tests - Measurement of the melt

flow index of polyethylene compounds

9

136 IEC TR 60493-3:2017 Guidelines for the statistical analysis of ageing test

data - Part 3: Minimum specimen numbers at

different test conditions with given experimental

data

19

IEC 60794-1-3:2017 Optical fibre cables - Part 1-3: Generic

specification - Optical cable elements

7

137 IEC 60317-0-10:2017 Specifications for particular types of winding

wires - Part 0-10: General requirements -

Polyester glass-fibre wound fused, unvarnished, or

resin or varnish impregnated, bare or enamelled

round copper wire

40

138 IEC 60317-70:2017 Specifications for particular types of winding

wires - Part 70: Polyester glass-fibre wound

fused, unvarnished or resin or varnish

impregnated, bare or enamelled round copper

wire, temperature index 155

20


wires - Part 71: Polyester glass-fibre wound fused

and resin or varnish impregnated, bare or

enamelled round copper wire, temperature index

180

20


wires - Part 72: Polyester glass-fibre wound fused,

silicone resin or varnish impregnated, bare or

enamelled round copper wire, temperature index

200

20

Page 13

141 JIS C 3662-5:2017 Replace:

JIS C 3662-5:2014

Polyvinyl chloride insulated cables of rated

voltages up to and including 450/750 V -- Part 5:

Flexible cables (cords)

18

142 JIS C 3662-7:2017/AMD1 Polyvinyl chloride insulated cables of rated

voltages up to and including 450/750V. Part 7:

Flexible cables screened and unscreened with two

or more conductors (Amendment 1)

3

143 JIS C 3663-8:2017/AMD1 Rubber insulated cables. Rated voltages up to and

including 450/750 V. Part 8: Cords for

applications requiring high flexibility

(Amendment 1)

3

144 JIS C 8461-21:2016

Replace:JIS C 8461-

21:2005

Conduit systems for cable management. Part 21:

Particular requirements. Rigid conduit systems

16

145 JIS C 8461-22:2016

Replace:JIS C 8461-

22:2005


Particular requirements. Pliable conduit systems

16

146 JIS C 8461-23:2016

Replace:JIS C 8461-

23:2005


Particular requirements. Flexible conduit systems

14

Công nghệ thông tin Trở về đầu trang

147 IEC 61131-2:2017 Replace:

IEC 61131-2:2007

Industrial-process measurement and control -

Programmable controllers - Part 2: Equipment

requirements and tests

227

148 IEC 61784-3/AMD1:2017

Replace: IEC 61784-3:2016

Industrial communication networks - Profiles -

Part 3: Functional safety fieldbuses - General rules

and profile definitions

32

149 IEC 62657-2:2017 Replace:

IEC 62657-2:2013

Industrial communication networks - Wireless

communication networks - Part 2: Coexistence

management

188

150 IEC 62948:2017 Replace:

IEC PAS 62948:2015

Industrial networks - Wireless communication

network and communication profiles - WIA-FA

198

151 IEC TR 62453-51-10:2017 Field device tool (FDT) interface specification -

Part 51-10: Communication implementation for

common object model - IEC 61784 CPF 1

80

152 IEC TS

62229:2017 Replace: IEC

TS 62229:2006

Multimedia systems and equipment - Multimedia

e-publishing and e-book - Conceptual model for

multimedia e-publishing

17

153 ISO 15836-1:2017 Replace:

ISO 15836:2009

Information and documentation — The Dublin

Core metadata element set — Part 1: Core

elements

7

http://www.webstore.jsa.or.jp/webstore/Com/FlowControl.jsp?lang=en&bunsyoId=JIS+C+3662-5%3A2017&dantaiCd=JIS&status=1&pageNo=0

Page 14

154 ISO 5127:2017 Replace:

ISO 5127:2001

Information and documentation — Foundation

and vocabulary

353

155 ISO/IEC 9594-

1:2017 Replace: ISO/IEC

9594-1:2014

Information technology - Open Systems

Interconnection - The Directory - Part 1:

Overview of concepts, models and services

23

156 ISO/IEC 9594-


9594-2:2014


Interconnection - The Directory - Part 2: Models

247

157 ISO/IEC 9594-


9594-3:2014


Interconnection - The Directory - Part 3: Abstract

service definition

120

158 ISO/IEC 9594-


9594-4:2014



Procedures for distributed operation

126

159 ISO/IEC 9594-


9594-5:2014


Interconnection - The Directory - Part 5: Protocol

specifications

83

160 ISO/IEC 9594-


9594-6:2014/COR1:2015


Interconnection - The Directory - Part 6: Selected

attribute types

116

161 ISO/IEC 9594-


9594-7:2014


Interconnection - The Directory - Part 7: Selected

object classes

29

162 ISO/IEC 9594-


9594-8:2014/COR3:2016


Interconnection - The Directory - Part 8: Public-

key and attribute certificate frameworks

242

163 ISO/IEC 9594-


9594-9:2014



Replication

37

164 ISO/IEC TR 11801-

9904:2017

Information technology - Generic cabling for

customer premises - Part 9904: Assessment and

mitigation of installed balanced cabling channels

to support 2,5GBASE-T and 5GBASE-T

29

165 ISO/IEC 9594-1:2017

Replace: ISO/IEC 9594-

1:2014

Information technology — Open Systems

Interconnection — The Directory — Part 1:

Overview of concepts, models and services

23

166 ISO/IEC 9594-2:2017


2:2014



Models

247

167 ISO/IEC 9594-3:2017


3:2014



Abstract service definition

120

Page 15

168 ISO/IEC 9594-4:2017


4:2014



Procedures for distributed operation

126

169 ISO/IEC 9594-5:2017


5:2014



Protocol specifications

83

170 ISO/IEC 9594-6:2017


6:2004



Selected attribute types

116

171 ISO/IEC 9594-7:2017


7:2014



Selected object classes

29

172 ISO/IEC 9594-8:2017


8:2014



Public-key and attribute certificate frameworks

242

173 ISO/IEC 9594-9:2017


9:2014



Replication

37

Quang học – Không gian Trở về đầu trang

174 BS ISO 20711:2017

Replace: BS ISO 10109-

4:2001

Optics and photonics. Environmental

requirements. Test requirements for telescopic

systems. Part : Test requirements for telescopic

systems

18

175 ISO 16192:2017 Replace:

ISO 16192:2010

Space systems — Experience gained in space

projects (lessons learned) — Principles and

guidelines

13

176 ISO 20711:2017 Replace:

ISO 20711:2001

Optics and photonics — Environmental

requirements — Test requirements for telescopic

systems

9

Xây dựng – Vật liệu xây dựng Trở về đầu trang

177 ASTM C1063-17 Replace:

ASTM C1063-16c

Standard Specification for Installation of Lathing

and Furring to Receive Interior and Exterior

Portland Cement-Based Plaster

11

178 ASTM C1252 -17 Replace:

ASTM C1252-06

Standard Test Methods for Uncompacted Void

Content of Fine Aggregate (as Influenced by

Particle Shape, Surface Texture, and Grading)

6

179 ASTM C1410-17 Replace:

ASTM C1410-13

Standard Specification for Cellular Melamine

Thermal and Sound-Absorbing Insulation

4

180 ASTM C596-09(2017)

Replace: ASTM C596-09e1

Standard Test Method for Drying Shrinkage of

Mortar Containing Hydraulic Cement

4






Page 16

181 ASTM C870-11(2017)

Replace: ASTM C870-

96(2004)

Standard Practice for Conditioning of Thermal

Insulating Materials

4

182 ASTM D3550/D3550M-17

Replace: ASTM D3550-01

Standard Practice for Thick Wall, Ring-Lined,

Split Barrel, Drive Sampling of Soils

6

183 ASTM E1745-17 Replace:

ASTM E1745-11

Standard Specification for Plastic Water Vapor

Retarders Used in Contact with Soil or Granular

Fill under Concrete Slabs

3

184 ASTM E2140-01(2017)

Replace: ASTM E2140-

01(2009)

Standard Test Method for Water Penetration of

Metal Roof Panel Systems by Static Water

Pressure Head

4


ASTM E2432-11

Standard Guide for General Principles of

Sustainability Relative to Buildings

6


ASTM E2957-15

Standard Test Method for Resistance to Wildfire

Penetration of Eaves, Soffits and Other

Projections

10

187 ASTM F2055-17 Replace:

ASTM F2055-10

Standard Test Method for Size and Squareness

of Resilient Floor Tile by Dial Gage Method

6

188 ASTM F2975-12(2017)

Replace: ASTM F2975-12

Standard Test Method for Measuring the Field

Performance of Commercial Kitchen Ventilation

Systems

13


ASTM F386-11

Standard Test Method for Thickness of Resilient

Flooring Materials Having Flat Surfaces

3

190 ASTM F387 -17 Replace:

ASTM F387-11

Standard Test Method for Measuring Thickness

of Resilient Floor Covering With Foam Layer

3


ASTM F511-11

Standard Test Method for Quality of Cut (Joint

Tightness) of Resilient Floor Tile

2


ASTM F970-15

Standard Test Method for Measuring Recovery

Properties of Floor Coverings after Static

Loading

4

193 ISO 16817:2017 Replace:

ISO 16817:2012

Building environment design — Indoor

environment — Design process for the visual

environment

29

194 ISO/TR 21136:2017 Timber structures — Vibration performance

criteria for timber floors

29

195 JIS A 1171:2016 Replace:

JIS A 1171:2014

Test methods for polymer-modified mortar 24

196 JIS A 5363:2016

Replace:JIS A 5363:2010

Precast concrete products. General rules for

methods of performance test

24

197 JIS A 5373:2016 Replace:

JIS A 5373:2014

Precast prestressed concrete products 154

Page 17

198 JIS A 5758:2016

Replace:JIS A 5758:2010

Sealants for sealing and glazing in buildings 17

Giày – Dệt – Vật liệu cách nhiệt Trở về đầu trang

199 ASTM D3882-08(2016)e1

Replace: ASTM D3882-

08(2016)

Standard Test Method for Bow and Skew in

Woven and Knitted Fabrics

5

200 ASTM D4002 -81(2016)

Replace: ASTM D4002-

81(2008)

Standard Practice for Evaluation of Buffable

Shoe Polish

6

201 BS EN 16783:2017 Thermal insulation products. Product category

rules (PCR) for factory made and in-situ formed

products for preparing environmental product

declarations

20

202 JIS L 1910:2016 Replace:JIS

L 1910:2002

Test methods for percentage of breaking and

bursting strength lowering of textiles to oxygen-

bleaching

10

Gốm sứ Trở về đầu trang

203 BS ISO 19810:2017 Fine ceramics (advanced ceramics, advanced

technical ceramics). Test method for self-

cleaning performance of semiconducting

photocatalytic materials under indoor lighting

environment. Measurement of water contact

angle

18

204 ISO 19810:2017 Fine ceramics (advanced ceramics, advanced

technical ceramics) — Test method for self-

cleaning performance of semiconducting

photocatalytic materials under indoor lighting

environment — Measurement of water contact

angle

12

Y tế - Chăm sóc sức khỏe Trở về đầu trang

205 BS EN 12397:2017 Replace:

BS EN 12397:2004

Safety requirements for cableway installations

designed to carry persons. Operation

20

206 BS EN ISO 9873:2017

Replace: BS EN ISO

9873:2000

Dentistry. Intra-oral mirrors 20

207 BS ISO 19610:2017 Traditional Chinese medicine. General

requirements for industrial manufacturing process

of red ginseng (Panax ginseng C.A. Meyer)

16

208 ISO 10939:2017 Replace:

ISO 10939:2009

Ophthalmic instruments — Slit-lamp

microscopes

7

209 ISO 10993-4:2017 Replace:

ISO 10993-4:2003

Biological evaluation of medical devices — Part

4: Selection of tests for interactions with blood

69

Page 18

210 ISO

15798:2013/Amd.1:2017

Ophthalmic implants — Ophthalmic

viscosurgical devices AMENDMENT 1

1

211 ISO 1797:2017 Replace:

ISO 1797-1:2011; ISO 1797-

2:1992; ISO 1797-3:2013

Dentistry — Shanks for rotary and oscillating

instruments

11

212 ISO 19233-1:2017 Implants for surgery — Orthopaedic joint

prosthesis — Part 1: Procedure for producing

parametric 3D bone models from CT data of the

knee

9

213 ISO 19715:2017 Dentistry — Filling instrument with contra angle 9

214 ISO 7787-3:2017 Replace:

ISO 7787-3:1991

Dentistry — Laboratory cutters — Part 3:

Carbide cutters for milling machines

6

215 ISO 7886-1:2017 Replace:

ISO 7886-1:1993; ; ISO

7886-1:1993/Cor 1:1995

Sterile hypodermic syringes for single use — Part

1: Syringes for manual use

28

216 ISO/TR 22979:2017

Replace: ISO/TR

22979:2006

Ophthalmic implants — Intraocular lenses —

Guidance on assessment of the need for clinical

investigation of intraocular lens design

modifications

22

217 ISO/TS 20428:2017 Health informatics -- Data elements and their

metadata for describing structured clinical

genomic sequence information in electronic

health records

33

218 JIS T 8141:2016 Replace:

JIS T 8141:2012

Personal eye protectors for optical radiations 30

219 JIS T 8147:2016 Replace:

JIS T 8147:2012

Personal eye protectors 23

Thiết bị giải trí Trở về đầu trang

220 ASTM F2974-17a Replace:

ASTM F2974-17

Standard Guide for Auditing Amusement Rides

and Devices

2


ASTM F770-15

Standard Practice for Ownership, Operation,

Maintenance, and Inspection of Amusement

Rides and Devices

4

Môi trường Trở về đầu trang

222 ASTM D7391-17e1

Replace: ASTM D7391-17

Standard Test Method for Categorization and

Quantification of Airborne Fungal Structures in

an Inertial Impaction Sample by Optical

Microscopy

13

223 BS ISO 18405:2017 Underwater acoustics. Terminology 62

224 BS ISO 21927-7:2017 Smoke and heat control systems. Smoke ducts

sections

22



Page 19

225 ISO 11731:2017 Replace:

ISO 11731:1998; ISO

11731-2:2004

Water quality — Enumeration of Legionella 38

226 ISO 3745:2012/Amd.1:2017 Acoustics — Determination of sound power

levels and sound energy levels of noise sources

using sound pressure — Precision methods for

anechoic rooms and hemi-anechoic rooms

AMENDMENT 1

5

227 ISO 8041-1:2017 Replace:

ISO 8041-1:2015; ISO 8041-

1:2005/Cor 1:2007

Human response to vibration — Measuring

instrumentation — Part 1: General purpose

vibration meters

106

Đo lường – Phép đo – Thống kê Trở về đầu trang

228 ISO 11843-

5:2008/Amd.1:2017

Capability of detection — Part 5: Methodology in

the linear and non-linear calibration cases

AMENDMENT 1

1

229 ISO 7870-8:2017 Control charts — Part 8: Charting techniques for

short runs and small mixed batches

31

230 ISO/TS 14411-1:2017 Preparation of particulate reference materials —

Part 1: Polydisperse material based on picket

fence of monodisperse spherical particles

29

231 JIS B 7512:2016

Replace:JIS B 7512:2005

Steel tape measures 10

232 JIS Z 8724:2015 Replace:JIS

Z 8724:1997

Methods of colour measurement -- Light-source

colour

41

Hệ thống tự động hóa công nghiệp – Biểu đồ điều khiển Trở về đầu trang

233 BS ISO 20140-5:2017 Automation systems and integration. Evaluating

energy efficiency and other factors of

manufacturing systems that influence the

environment. Environmental performance

evaluation data

98

234 BS ISO 7870-8:2017 Control charts. Charting techniques for short runs

and small mixed batches

40

Thư viện Trường Đại học Công Nghiệp TP.HCM phối hợp với Trung tâm thông tin khoa

học và công nghệ TP.HCM cung cấp thông tin toàn văn dành cho người sử dụng thư viện trong

trường (SV, GV, HVCH, CBVC...) có nhu cầu học tập, nghiên cứu, tham khảo. Để gửi và nhận thông

tin, xin vui lòng liên hệ:

1. Thư viện Đại học Công Nghiệp TP.HCM: Gửi thông tin yêu cầu bằng 1 trong các phương tiện

sau:

+ Cổng thông tin Thư viện: http://lib.iuh.edu.vn tại mục "Yêu cầu tin";

+ Facebook: http://facebook.com/libiuh - Gửi qua "Tin nhắn" trên Page;

http://lib.iuh.edu.vn/

http://facebook.com/libiuh

Page 20

+ Liên hệ Phòng Nghiệp vụ: Phan Minh Trí – 0919.8989.33 - ĐT: (08) 38940390 (130) - Email:

[email protected]

2. Phòng đảm bảo thông tin của trung tâm thông tin khoa học và công nghệ TP.HCM

Địa chỉ: 79 Trương Định - Q1 - TP.HCM

ĐT: (08)38243826: (08)38297040 Ext: 202-203-216) Fax: 38291957

Website: www.cesti.gov.vn Email: [email protected]

Lưu ý

1/ Khi đến gửi yêu cầu thông tin, bạn nhớ mang theo thẻ sinh viên, thẻ giảng viên của trường.

2/ Thông tin được cung cấp miễn phi, ngoại trừ chi phí: in ấn tài liệu, mua tài liệu (nếu có)

Thư viện Trường Đại học Công nghiệp Thành phố Hô Chí Minh.

mailto:[email protected]

http://www.cesti.gov.vn/

mailto:[email protected]

Documents

TIÊU CHUẨN MỚI THÁNG 05/2017lib.iuh.edu.vn/wp-content/uploads/2017/08/Bantin_Tieuchuan_05_2017.pdf · 50 BS ISO 15243:2017 Replace: BS ISO 15243:2004 Rolling bearings. Damage