Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
1
TRƯỜNG ĐH CÔNG NGHIỆP TP. HỒ CHÍ MINH
TRUNG TÂM THÔNG TIN – THƯ VIỆN
TIÊU CHUẨN MỚI THÁNG 8/2016
Mục lục
TIÊU CHUẨN QUỐC GIA (TCVN) ....................................................... 2
Cơ khí – Chế tạo ................................................................................................................. 2
Dầu mỏ ................................................................................................................................ 2
Xây dựng – Vật liệu xây dựng .......................................................................................... 2
TIÊU CHUẨN NƯỚC NGOÀI ................................................................ 2
Công nghệ thông tin ......................................................................................................... 2
Năng lượng ....................................................................................................................... 3
Giao thông – Vận tải – Tàu thủy .................................................................................... 3
Điện – Điện tử- Thiết bị điện ........................................................................................... 4
Cơ khí – Chế tạo ............................................................................................................... 9
Thực phẩm ...................................................................................................................... 10
Luyện kim – Sản phẩm kim loại ..................................................................................... 10
Xây dựng – Vật liệu xây dựng ...................................................................................... 11
Khai thác mỏ và khoáng sản ........................................................................................... 12
Chất lượng nước – Cấp nước .......................................................................................... 12
Chất dẻo – Cao su .......................................................................................................... 12
Dầu mỏ ............................................................................................................................ 13
May mặc ............................................................................................................................ 13
Bao gói ............................................................................................................................. 13
Nông nghiệp ...................................................................................................................... 14
Y tế - Chăm sóc sức khỏe ............................................................................................. 14
An toàn – môi trường ..................................................................................................... 15
Đo lường và phép đo, hiện tượng vật lý ........................................................................ 15
Thử nghiệm ...................................................................................................................... 16
2
Chi tiết
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
TIÊU CHUẨN QUỐC GIA (TCVN)
Cơ khí – Chế tạo Trở về đầu trang
1 TCVN 11297:2016 Cầu đường sắt. Quy trình kiểm định 202
Dầu mỏ Trở về đầu trang
2
TCVN 7486:2005 Sản phẩm dầu mỏ. Phương pháp phân
tích định tính hợp chất lưu huỳnh hoạt
tính trong nhiên liệu và dung môi
(doctor test)
8
Xây dựng – Vật liệu xây dựng Trở về đầu trang
3 TCVN 11321:2016 Cọc. Phương pháp thử động biến dạng
lớn
19
4 TCVN 11384:2016 Phôi thép dùng để cán nóng 12
5 TCVN 5847:2016 Thay thế: TCVN
5847:1994
Cột điện bê tông cốt thép ly tâm 23
6 TCVN 6071:2013 Thay thế: TCVN
6071:1995
Sét để sản xuất clanhke xi măng pooc
lăng
6
7 TCVN 6072:2013 Thay thế: TCVN
6072:1996
Đá vôi để sản xuất clanhke xi măng
pooc lăng
6
TIÊU CHUẨN NƯỚC NGOÀI
Công nghệ thông tin Trở về đầu trang
8
ISO/IEC 15961-4:2016 Replace:
ISO/IEC 15961:2004
Information technology -- Radio
frequency identification (RFID) for
item management: Data protocol -- Part
4: Application interface commands for
battery assist and sensor functionality
25
9 ISO/IEC TR 18120:2016 Information technology -- Learning,
education, and training -- Requirements
for e-textbooks in education
69
10 ISO 14405-1:2016 Replace: ISO
14405-1:2010
Geometrical product specifications
(GPS) -- Dimensional tolerancing --
Part 1: Linear sizes
56
11
ISO/IEC 18745-2:2016 Information technology -- Test methods
for machine readable travel documents
(MRTD) and associated devices -- Part
2: Test methods for the contactless
interface
37
12 ISO/IEC TS 18661-5:2016 Information Technology --
Programming languages, their
24
3
environments, and system software
interfaces -- Floating-point extensions
for C -- Part 5: Supplementary
attributes
13 ISO 28564-2:2016 Public information guidance systems --
Part 2: Guidelines for the design and
use of location signs and direction signs
27
14
IEC 62680-1-3:2016 Universal serial bus interfaces for data
and power - Part 1-3: Universal Serial
Bus interfaces - Common components -
USB Type-C™ cable and connector
specification
173
15 ISO/IEC 19794-14:2013 Replace:
ISO/IEC 19794-14:2013/AMD1:2016
Information technology -- Biometric
data interchange formats -- Part 14:
DNA data
36
16 ISO/IEC 30122-1:2016 Information technology - User
interfaces - Voice commands - Part 1:
Framework and general guidance
7
17
ISO/IEC 30122-4:2016 Information technology - User
interfaces - Voice commands - Part 4:
Management of voice command
registration
8
18
IEC 62940:2016 PRV Maritime navigation and
radiocommunication equipment and
systems - Integrated communication
system (ICS) - Operational and
performance requirements, methods of
testing and required test results
53
19 BS ISO/IEC 29161:2016 Information technology. Data structure.
Unique identification for the Internet of
Things
32
Năng lượng Trở về đầu trang
20 PD IEC/TS 61400-26-3:2016 Wind energy generation systems.
Availability for wind power stations
122
Giao thông – Vận tải – Tàu thủy Trở về đầu trang
21 ISO 17987-1:2016 Road vehicles -- Local Interconnect
Network (LIN) -- Part 1: General
information and use case definition
8
22 ISO 17987-2:2016 Road vehicles -- Local Interconnect
Network (LIN) -- Part 2: Transport
protocol and network layer services
72
23 ISO 17987-3:2016 Road vehicles -- Local Interconnect 44
4
Network (LIN) -- Part 3: Protocol
specification
24
ISO 6699:2016 Replace: ISO
6699:1990
Cycles -- Handlebar centre and stem
dimensions
2
25 ISO 14230-2:2016 Replace: ISO
14230-2:2013
Road vehicles -- Diagnostic
communication over K-Line (DoK-
Line) -- Part 2: Data link layer
50
26
ISO 20683-1:2016 Replace: ISO
20683-1:2005
Aircraft ground equipment -- Nose gear
towbarless towing vehicle (TLTV) --
Design, testing and maintenance
requirements -- Part 1: Main line
aircraft
24
27 ISO 12480-3:2016 Replace: ISO
22915-7:2009
Cranes -- Safe use -- Part 3: Tower
cranes 14
28 ISO 22915-7:2016 Industrial trucks -- Verification of
stability -- Part 7: Bidirectional and
multidirectional trucks
22
29
ISO 20683-2:2016 Replace: ISO
20683-2:2004
Aircraft ground equipment -- Design,
testing and maintenance requirements
for nose gear towbarless towing vehicle
(TLTV) -- Part 2: Regional aircraft
15
30 ISO/TS 19115-3:2016 Geographic information -- Metadata --
Part 3: XML schema implementation
for fundamental concepts
65
31
BS ISO 12619-4:2016 Road vehicles. Compressed gaseous
hydrogen (CGH2) and
hydrogen/natural gas blends fuel
system components. Check valve
14
32
BS ISO 20683-2:2016 Replace: BS ISO
20683-2:2004
Aircraft ground equipment. Design,
testing and maintenance requirements
for nose gear towbarless towing vehicle
(TLTV). Regional aircraft
26
33 BS EN 50633:2016 Railway applications. Fixed
installations. Protection principles for
AC and DC electric traction systems.
50
Điện – Điện tử- Thiết bị điện Trở về đầu trang
34 ISO 19076:2016 (IULTCS/IUP 58) Leather -- Measurement of leather
surface -- Using electronic techniques
14
35 ISO/TS 21144:2016 Ergonomics of human-system
interaction -- Electronic paper display -
- Indoor use
17
5
36
ISO/TS 16460:2016 Intelligent transport systems --
Communications access for land
mobiles (CALM) -- Communication
protocol messages for global usage
43
37
CISPR 14-1:2016 Replace: CISPR 14-
1:2005+AMD1:2008+AMD2:2011
CSV
Electromagnetic compatibility -
Requirements for household appliances,
electric tools and similar apparatus -
Part 1: Emission
195
38 CISPR 35:2016 Electromagnetic compatibility of
multimedia equipment - Immunity
requirements
165
39 IEC 60204:2016 SER Safety of machinery - Electrical
equipment of machines - ALL PARTS
990
40 IEC TS 60204-34:2016 Safety of machinery - Electrical
equipment of machines - Part 34:
Requirements for machine tools
80
41
IEC 60269-2:2013+AMD1:2016 CSV
Replace: IEC 60269-
2:2013/AMD1:2016
Low-voltage fuses - Part 2:
Supplementary requirements for fuses
for use by authorized persons (fuses
mainly for industrial application) -
Examples of standardized systems of
fuses A to K
812
42
IEC 60269-
4:2009+AMD1:2012+AMD2:2016
CSV Replace: IEC 60269-
4:2009/AMD2:2016
Low-voltage fuses - Part 4:
Supplementary requirements for fuse-
links for the protection of
semiconductor devices
216
43
IEC 60384-4:2016 Replace: IEC
60384-4:2007/COR1:2007
Fixed capacitors for use in electronic
equipment - Part 4: Sectional
specification - Fixed aluminium
electrolytic capacitors with solid
(MnO2) and non-solid electrolyte
83
44
IEC 60664-3:2016 PRV Replace: IEC
60664-3:2003/AMD1:2010/COR1:2010
Insulation coordination for equipment
within low-voltage systems - Part 3:
Use of coating, potting or moulding for
protection against pollution
50
45
IEC 60898-2:2016 Replace: IEC
60898-2:2000+AMD1:2003 CSV
Electrical accessories - Circuit-breakers
for overcurrent protection for
household and similar installations -
Part 2: Circuit-breakers for AC and DC
operation
36
46 IEC 61078:2016 Replace: IEC
61078:2006
Reliability block diagrams 250
6
47
IEC 61097-4:2012+AMD1:2016
CSV Replace: IEC 61097-4:2012
Global maritime distress and safety
system (GMDSS) - Part 4: Inmarsat-C
ship earth station and Inmarsat
enhanced group call (EGC) equipment -
Operational and performance
requirements, methods of testing and
required test results
59
48
IEC 61169-58:2016 Radio-frequency connectors - Part 58:
Sectional specification for RF coaxial
connectors with blind-mate coupling -
Characteristic impedance 50 Ω (type
SBMA)
49
49 IEC 61204-3:2016 PRV Low-voltage switch mode power
supplies - Part 3: Electromagnetic
compatibility (EMC)
81
50 IEC 61703:2016 Replace: IEC
61703:2001
Mathematical expressions for
reliability, availability, maintainability
and maintenance support terms
209
51 IEC 61730-1:2016 Replace: IEC
61730-1:2004/AMD2:2013
Photovoltaic (PV) module safety
qualification - Part 1: Requirements for
construction
106
52 IEC 61730-2:2016 RLV Replace: IEC
61730-2:2004+AMD1:2011 CSV
Photovoltaic (PV) module safety
qualification - Part 2: Requirements for
testing
286
53 IEC 62040-5-3:2016 PRV Uninterruptible power systems (UPS) -
Part 5-3: DC output UPS - Performance
and test requirements
133
54
IEC 62153-4-16:2016 PRV Metallic communication cable test
methods - Part 4-16: Electromagnetic
compatibility (EMC) - Extension of the
frequency range to higher frequencies
for transfer impedance and to lower
frequencies for screening attenuation
measurements using the triaxial set-up
18
55
IEC 62226-3-1/AMD1:2016 PRV
Replace: IEC 62226-3-1:2007
Amendment 1 - Exposure to electric or
magnetic fields in the low and
intermediate frequency range - Methods
for calculating the current density and
internal electric field induced in the
human body - Part 3-1: Exposure to
electric fields - Analytical and 2D
numerical models
9
7
56
IEC 62320-2:2016 PRV Replace: IEC
62320-2:2008
Maritime navigation and
radiocommunication equipment and
systems - Automatic identification
system (AIS) - Part 2: AIS AtoN
Stations - Operational and performance
requirements, methods of testing and
required test results
114
57
IEC 62351:2016 SER Power systems management and
associated information exchange - Data
and communications security - ALL
PARTS
530
58
IEC TS 62600-2:2016 Marine energy - Wave, tidal and other
water current converters - Part 2:
Design requirements for marine energy
systems
101
59
IEC TS 62600-102:2016 Marine energy - Wave, tidal and other
water current converters - Part 102:
Wave energy converter power
performance assessment at a second
location using measured assessment
data
33
60 IEC 62629-22-1:2016 PRV Replace:
IEC 62629-22-1:2013
3D display devices - Part 22-1:
Measuring methods for
autostereoscopic displays - Optical
46
61 IEC TS 62666:2016 Replace: IEC TS
62666:2010
Guidelines for the inclusion of
documentation aspects in product
standards
26
62
IEC TS 62668-2:2016 Replace: IEC TS
62668-2:2014
Process management for avionics -
Counterfeit prevention - Part 2:
Managing electronic components from
non-franchised sources
46
63
IEC 62772:2016 Composite hollow core station post
insulators for substations with a.c.
voltage greater than 1 000 V and d.c.
voltage greater than 1 500 V -
Definitions, test methods and
acceptance criteria
45
64
IEC 62940:2016 PRV Maritime navigation and
radiocommunication equipment and
systems - Integrated communication
system (ICS) - Operational and
performance requirements, methods of
testing and required test results
53
8
65 IEC TR 63036:2016 Electrical interface specification for
phase-cut dimmer in phase-cut dimmed
lighting systems
33
66
IEC TS 60204-34:2016 Safety of machinery - Electrical
equipment of machines - Part 34:
Requirements for machine tools
Pages: 80
32
67
IEC 60601-2-40:2016 Replace: IEC
60601-2-40:1998
Medical electrical equipment - Part 2-
40: Particular requirements for the
basic safety and essential performance
of electromyographs and evoked
response equipment
60
68
IEC 60601-2-46:2016 RLV Replace:
IEC 60601-2-46:2016
Medical electrical equipment - Part 2-
46: Particular requirements for the
basic safety and essential performance
of operating tables
77
69 IEC 62040-5-3:2016 PRV Uninterruptible power systems (UPS) -
Part 5-3: DC output UPS - Performance
and test requirements
133
70
IEC 62772:2016 Composite hollow core station post
insulators for substations with a.c.
voltage greater than 1 000 V and d.c.
voltage greater than 1 500 V -
Definitions, test methods and
acceptance criteria
45
71 IEC TR 63036:2016 Electrical interface specification for
phase-cut dimmer in phase-cut dimmed
lighting systems
33
72 ASTM D6630/D6630M -16 Replace:
ASTM D6630-08
Standard Guide for Low Slope
Insulated Roof Membrane Assembly
Performance
4
73 ASTM E1734-16 Replace: ASTM
E1734-15
Standard Practice for Radioscopic
Examination of Castings
9
74 ASTM E2007-10(2016) Replace:
ASTM E2007-10
Standard Guide for Computed
Radiography
23
75 BS EN 50632-2-17:2016 Electric motor-operated tools. Dust
measurement procedure. Particular
requirements for routers and trimmers
10
76 BS EN 61300-2-37:2016 Replace: BS
EN 61300-2-37:2007
Fibre optic interconnecting devices and
passive components. Basic test and
measurement procedures. Tests. Cable
16
9
bending for fibre optic closures
77 BS ISO 12183:2016 Nuclear fuel technology. Controlled-
potential coulometric assay of
plutonium.
38
78 BS EN 50632-2-5:2016 Electric motor-operated tools. Dust
measurement procedure. Particular
requirements for circular saws
10
79 BS EN ISO 4590:2016 Replace: BS EN
ISO 4590:2003
Rigid cellular plastics. Determination
of the volume percentage of open cells
and of closed cells.
34
80 BS ISO 21080:2016 Space data and information transfer
systems. Licklider transmission
protocol (LTP) for CCSDS.
74
81
BS EN 50632-2-4:2016 Electric motor-operated tools. Dust
measurement procedure. Particular
requirements for sanders other than
disk type
14
82
BS EN 50604-1:2016 Secondary lithium batteries for light
EV (electric vehicle) applications.
General safety requirements and test
methods
50
83 PD IEC/PAS 63015:2016 Definition of “Low-Halogen” for
electronic products
20
84 PD CEN/TR 12098-8:2016 Controls for heating systems.
Accompanying TR prEN 12098-
5:2015. Modules M3-5,6,7,8
16
85
PD IEC/TS 61508-3-1:2016 Functional safety of
electrical/electronic/programmable
electronic safety-related systems.
Software requirements. Reuse of pre-
existing software elements to
implement all or part of a safety
function
14
86
BS EN 50632-3-1:2016 Electric motor-operated tools. Dust
measurement procedure. Particular
requirements for transportable table
saws
10
Cơ khí – Chế tạo Trở về đầu trang
87 ISO 6336-5:2016 Replace: ISO 6336-
5:2003
Calculation of load capacity of spur and
helical gears -- Part 5: Strength and
quality of materials
47
10
88
ISO 5781:2016 Replace: ISO
5781:2000
Hydraulic fluid power -- Pressure-
reducing valves, sequence valves,
unloading valves, throttle valves and
check valves -- Mounting surfaces
24
89 ISO 14590:2016 Replace; ISO
14590:2005
Cold-reduced steel sheet of high tensile
strength and low yield point with
improved formability
12
90
ISO 8168:2016 Replace: ISO
8168:2008
Aerospace -- Bolts, with MJ threads,
made of heat and corrosion resisting
steel, strength class 1 100 MPa --
Procurement specification
21
91 ISO 2903:2016 Replace: ISO
2903:1993
ISO metric trapezoidal screw threads –
Tolerances
16
92 ISO 2902:2016 Replace: ISO
2902:1977
ISO metric trapezoidal screw threads --
General plan
4
93 PD ISO/TR 19948:2016 Earth-moving machinery. Conformity
assessment and certification process
18
94
BS ISO 3070-2:2016 Replace: BS ISO
3070-2:2007
Machine tools. Test conditions for
testing the accuracy of boring and
milling machines with horizontal
spindle. Machines with movable
column along the X-axis (floor type)
64
Thực phẩm Trở về đầu trang
95 ISO 13171:2016 Essential oil of oregano [Origanum
vulgare L. subsp. hirtum (Link) letsw]
8
96
ISO 11816-2:2016 (IDF 155-2)
Replace: ISO 11816-2:2003 (IDF 155-
2:2003)
Milk and milk products --
Determination of alkaline phosphatase
activity -- Part 2: Fluorimetric method
for cheese
15
97 ASTM D490 -92(2016) Replace:
ASTM D490-92(2011)
Standard Specification for Road Tar 2
98 ASTM D633 -11(2016) Replace:
ASTM D633-11
Standard Volume Correction Table for
Road Tar
3
99
ASTM D7504 -16 Replace: ASTM
D7504-15e1
Standard Test Method for Trace
Impurities in Monocyclic Aromatic
Hydrocarbons by Gas Chromatography
and Effective Carbon Number
13
Luyện kim – Sản phẩm kim loại Trở về đầu trang
100 ISO 6508-1:2016 Replace: ISO 6508-
1:2015
Metallic materials -- Rockwell hardness
test -- Part 1: Test method
32
11
101 ASTM B243 -16 Replace: ASTM
B243-13
Standard Terminology of Powder
Metallurgy
12
102
ASTM B444 -16e 1 Replace: ASTM
B444-16
Standard Specification for Nickel-
Chromium-Molybdenum-Columbium
Alloys (UNS N06625 and UNS
N06852) and Nickel-Chromium-
Molybdenum-Silicon Alloy (UNS
N06219) Pipe and Tube Thursday,
4
Xây dựng – Vật liệu xây dựng Trở về đầu trang
103 ASTM C39/C39M-16b Replace:
ASTM C39/C39M-16a
Standard Test Method for Compressive
Strength of Cylindrical Concrete
Specimens
7
104
ASTM C1780-16a Replace: ASTM
C1780-16
Standard Practice for Installation
Methods for Adhered Manufactured
Stone Masonry Veneer
7
105
ASTM D5084-16 Replace: ASTM
D5084-10
Standard Test Methods for
Measurement of Hydraulic
Conductivity of Saturated Porous
Materials Using a Flexible Wall
Permeameter
24
106
ASTM D5329-16 Replace: ASTM
D5329-15
Standard Test Methods for Sealants and
Fillers, Hot-Applied, for Joints and
Cracks in Asphalt Pavements and
Portland Cement Concrete Pavements
9
107 ASTM D5889/D5889M -16 Replace:
ASTM D5889-11
Standard Practice for Quality Control
of Geosynthetic Clay Liners
3
108
ASTM D7497 -09(2016) Replace:
ASTM D7497-09
Standard Practice for Recovering
Residue from Emulsified Asphalt Using
Low Temperature Evaporative
Technique
2
109 ASTM E95 -68 (2016) Replace: ASTM
E95-68(2011)
Standard Specification for Cell-Type
Oven with Controlled Rates of
Ventilation
3
110 ASTM E210 -63(2016) Replace:
ASTM E210-63(2010)
Standard Specification for Microscope
Objective Thread
4
111 ASTM E715 -80(2016) Replace:
ASTM E715-80(2011)
Standard Specification for Gravity-
Convection and Forced-Circulation
Water Baths
2
112 ASTM E1292-94(2016) Replace:
ASTM E1292-94(2006)
Standard Specification for Gravity
Convection and Forced Ventilation
Incubators
2
12
113 ASTM E1300 -16 Replace: ASTM
E1300-12ae1
Standard Practice for Determining Load
Resistance of Glass in Buildings
62
114 JIS A 9526:2015 Replace: JIS A
4710:2004
Windows and doorsets -- Thermal
resistance test
66
115 JIS A 4710:2015 Replace: JIS A
4710:2004
Method of making and curing concrete
specimens
66
116 JIS A 5021:2016/AMD 1 Recycled aggregate for concrete - class
H (Amendment 1)
1
117 JIS A 6203:2015 Replace: JIS A
6203:2008
Polymer dispersions and redispersible
polymer powders for cement modifiers
14
Khai thác mỏ và khoáng sản Trở về đầu trang
118 ISO 22476-15:2016 Geotechnical investigation and testing -
- Field testing -- Part 15: Measuring
while drilling
9
119
ASTM D6725/D6725M- 16 Replace:
ASTM D6725-04(2010)
Standard Practice for Direct Push
Installation of Prepacked Screen
Monitoring Wells in Unconsolidated
Aquifers
16
Chất lượng nước – Cấp nước Trở về đầu trang
120 BS EN 12678:2016 Replace: BS EN
12678:2008
Chemical used for treatment of water
intended for human consumption.
Potassium peroxomonosulfate.
30
121 BS EN 937:2016 Replace: BS EN
937:2009
Chemicals used for treatment of water
intended for human consumption.
Chlorine.
26
Chất dẻo – Cao su Trở về đầu trang
122
ISO 18830:2016 Plastics -- Determination of aerobic
biodegradation of non-floating plastic
materials in a seawater/sandy sediment
interface -- Method by measuring the
oxygen demand in closed respirometer
9
123
ISO 18746:2016 Traditional Chinese medicine -- Sterile
intradermal acupuncture needles for
single use
9
124
ISO 19679:2016 Plastics -- Determination of aerobic
biodegradation of non-floating plastic
materials in a seawater/sediment
interface -- Method by analysis of
evolved carbon dioxide
11
125 ASTM D4811/D4811M -16 Replace:
ASTM D4811/D4811M-06(2013)e1
Standard Specification for
Nonvulcanized (Uncured) Rubber
4
13
Sheet Used as Roof Flashing
126
ASTM D6499-16 Replace: ASTM
D6499-12
Standard Test Method for The
Immunological Measurement of
Antigenic Protein in Natural Rubber
and its Products
9
127 ASTM D6515-00(2016) Replace:
ASTM D6515-00(2010)
Standard Test Method for Rubber Shaft
Seals Determination of Recovery From
Bending
7
Dầu mỏ Trở về đầu trang
128 ISO 18846:2016 Solid biofuels -- Determination of fines
content in samples of pellets
4
129
ISO 12619-4:2016 Road vehicles -- Compressed gaseous
hydrogen (CGH2) and
hydrogen/natural gas blends fuel
system components -- Part 4: Check
valve
5
130
ISO 12619-5:2016 Road vehicles -- Compressed gaseous
hydrogen (CGH2) and
hydrogen/natural gas blends fuel
system components -- Part 5: Manual
cylinder valve
5
131
ISO 18797-1:2016 Petroleum, petrochemical and natural
gas industries -- External corrosion
protection of risers by coatings and
linings -- Part 1: Elastomeric coating
systems-polychloroprene or EPDM
29
132 ASTM D86 -16a Replace: ASTM D86-
16
Standard Test Method for Distillation
of Petroleum Products and Liquid Fuels
at Atmospheric Pressure
28
133 ASTM D6897 – 16 Replace: ASTM
D6897 - 09
Standard Test Method for Vapor
Pressure of Liquefied Petroleum Gases
(LPG) (Expansion Method)
5
May mặc Trở về đầu trang
134
BS 7971-5:2016 Replace: BS 7971-
5:2004, BS 7971-11:2006
Protective clothing and equipment for
use in violent situations and in training.
Footwear. Requirements and test
methods
16
Bao gói Trở về đầu trang
135 ISO 9197:2016 Replace: ISO
9197:2006
Paper, board and pulps --
Determination of water-soluble
chlorides
7
14
136
BS EN 14713:2016 Replace: BS EN
14713:2005
Adhesives for paper and board,
packaging and disposable sanitary
products. Determination of friction
properties of films potentially suitable
for bonding
16
Nông nghiệp Trở về đầu trang
137
ISO 3767-2:2016 Replace: ISO 3767-
2:2008
Tractors, machinery for agriculture and
forestry, powered lawn and garden
equipment -- Symbols for operator
controls and other displays -- Part 2:
Symbols for agricultural tractors and
machinery
59
Y tế - Chăm sóc sức khỏe Trở về đầu trang
138 ISO 9626:2016: Replace ISO
9626:1991; ISO 9626:1991/Amd
1:2001
Stainless steel needle tubing for the
manufacture of medical devices --
Requirements and test methods
23
139 ISO 7864:2016 Replace: ISO
7864:1993
Sterile hypodermic needles for single
use -- Requirements and test methods
24
140 ISO 6009:2016 Replace: ISO
6009:1992; ISO 6009:1992/Cor 1:2008
Hypodermic needles for single use --
Colour coding for identification
8
141
ISO 3070-2:2016 Replace: ISO 3070-
2:2007
Machine tools -- Test conditions for
testing the accuracy of boring and
milling machines with horizontal
spindle -- Part 2: Machines with
movable column along the X-axis
(floor type)
53
142 ISO/IEC 19794-14:2013/Amd 1:2016 Conformance testing and clarification
of defects
94
143
ISO/TR 19024:2016 Evaluation of CPB devices relative to
their capabilities of reducing the
transmission of gaseous microemboli
(GME) to a patient during
cardiopulmonary bypass
9
144
ISO 18241:2016 Cardiovascular implants and
extracorporeal systems --
Cardiopulmonary bypass systems --
Venous bubble traps
9
145 ISO 18242:2016 Cardiovascular implants and
extracorporeal systems -- Centrifugal
blood pumps
10
146 ISO 15676:2016 Replace: ISO
15676:2005
Cardiovascular implants and artificial
organs -- Requirements for single-use
8
15
tubing packs for cardiopulmonary
bypass and extracorporeal membrane
oxygenation (ECMO)
147 ISO 13976:2016 Replace: ISO
13976:2005
Hot-rolled steel sheet in coils of
structural quality and heavy thickness
9
148
ISO 15674:2016 Replace: ISO
15674:2009
Cardiovascular implants and artificial
organs -- Hard-shell cardiotomy/venous
reservoir systems (with/without filter)
and soft venous reservoir bags
11
149 15674:2016 Replace: ISO 15674:2009
Replace: ISO 15675:2009
Cardiovascular implants and artificial
organs -- Cardiopulmonary bypass
systems -- Arterial blood line filters
8
150
IEC 60601-2-40:2016 Replace: IEC
60601-2-40:1998
Medical electrical equipment - Part 2-
40: Particular requirements for the
basic safety and essential performance
of electromyographs and evoked
response equipment
60
151
IEC 60601-2-46:2016 RLV Replace:
IEC 60601-2-46:2016
Medical electrical equipment - Part 2-
46: Particular requirements for the
basic safety and essential performance
of operating tables
77
152 ASTM D3492 -16 Replace: ASTM
D3492-15
Standard Specification for Rubber
Contraceptives (Male Condoms)
16
An toàn – môi trường Trở về đầu trang
153 ISO/TR 14073:2016 Environmental management -- Water
footprint -- Illustrative examples on
how to apply ISO 14046
62
Đo lường và phép đo, hiện tượng vật lý Trở về đầu trang
154
ISO 12829:2016 Hydraulic spin-on filters with finite
lives -- Method for verifying the rated
fatigue life and the rated static burst
pressure of the pressure-containing
envelope
11
155
ISO 6976:2016 Replace: ISO
6976:1995; ISO 6976:1995/Cor 1:1997;
ISO 6976:1995/Cor 2:1997; ISO
6976:1995/Cor 2:1997
Natural gas -- Calculation of calorific
values, density, relative density and
Wobbe indices from composition
57
156 ISO 11476:2016 Repalce: ISO
11476:2010
Paper and board -- Determination of
CIE whiteness, C/2° (indoor
illumination conditions)
16
157 ISO 12183:2016 Replace: ISO
12183:2005
Nuclear fuel technology -- Controlled-
potential coulometric assay of
29
16
plutonium
158
ISO 10140-1:2016 Replace: ISO
10140-1:2010; ISO 10140-1:2010/Amd
1:2012; ISO 10140-1:2010/Amd 2:2014
Acoustics -- Laboratory measurement
of sound insulation of building
elements -- Part 1: Application rules for
specific products
55
159 BS EN ISO 16994:2016 Replace: BS
EN ISO 16994:2015
Solid biofuels. Determination of total
content of sulphur and chlorine.
22
160
PD IEC/TS 62600-102:2016 Marine energy. Wave, tidal and other
water current converters. Wave energy
converter power performance
assessment at a second location using
measured assessment data
38
161 PD IEC/TR 62935:2016 Measurement methods. High dynamic
range video
18
162 PD IEC/TS 61724-3:2016 Photovoltaic system performance.
Energy evaluation method
32
163 BS ISO 24678-6:2016 Requirements governing algebraic
formulae. Flashover related phenomena
30
Thử nghiệm Trở về đầu trang
164
ISO 22514-4:2016 Replace: ISO/TR
22514-4:2007
Statistical methods in process
management -- Capability and
performance -- Part 4: Process
capability estimates and performance
measures
44
165 ISO 866:2016 Replace: ISO 866:1975 Centre drills for centre holes without
protecting chamfers -- Type A
6
166 ASTM D2358-16 Replace: ASTM
D2358-89(2009)
Standard Test Method for Separation of
Active Ingredient from Surfactant and
Syndet Compositions
3
167
ASTM D4251-89(2016) Replace:
ASTM D4251-89(2009) Standard Test Method for Active
Matter in Anionic Surfactants by
Potentiometric Titration
4
168 ASTM D4821 -16 Replace: ASTM
D4821-15
Standard Guide for Carbon
Black#x2014;Validation of Test
Method Precision and Bias
13
169
ASTM D4956 -16b Replace: ASTM
D4956-16a
Standard Specification for
Retroreflective Sheeting for Traffic
Control
14
170 ASTM D7195 - 16 Replace: ASTM
D7195-06(2012)
Standard Guide for Setting Object
Color Specifications
4
17
171 ASTM F2285-04(2016)e1 Replace:
ASTM F2285-04(2010)
Standard Consumer Safety
Performance Specification for Diaper
Changing Tables for Commercial Use
5
172 ASTM C1498 -04a(2016) Replace:
ASTM C1498-04a
Standard Test Method for Hygroscopic
Sorption Isotherms of Building
Materials
4
173 ASTM D816-06(2016) Replace: ASTM
D816-06(2011)
Standard Test Methods for Rubber
Cements
6
174 ASTM D5064-16 Replace: ASTM
D5064-07(2012)
Standard Practice for Conducting a
Patch Test to Assess Coating
Compatibility
3
175 ASTM D6909-10(2016) Replace:
ASTM D6909-10
Standard Specification for High
Temperature and Acid-Resistant
Fluorocarbon Terpolymer Elastomer
2
176 ASTM D7125-16 Replace: ASTM
D7125-11
Standard Specification for Cumene
(Isopropylbenzene) Manufactured Via a
Zeolite Process
2
177
ASTM D7332/D7332M-16 Replace:
ASTM D7332/D7332M-15a
Standard Test Method for Measuring
the Fastener Pull-Through Resistance
of a Fiber-Reinforced Polymer Matrix
Composite
12
178 ASTM D7393-16 Replace: ASTM
D7393-07(2012)
Standard Practice for Indicating Oil in
Abrasives
2
179 ASTM E2022-16 Replace: ASTM
E2022-11
Standard Practice for Calculation of
Weighting Factors for Tristimulus
Integration
10
180 ASTM E3066 -16 Standard Practice for Assessing
Relative Sustainability Involving
Energy or Chemicals from Biomass
7
181 ASTM F834 -84(2008) Replaced by:
ASTM F963 - 11
Standard Consumer Safety
Specification for Toy Chests
(Withdrawn 2016)
9
182 BS EN 12697-25:2016 Replace: BS EN
12697-25:2005
Bituminous mixtures. Test methods.
Cyclic compression test
40
Thư viện Trường Đại học Công Nghiệp TP.HCM phối hợp với Trung tâm thông tin khoa
học và công nghệ TP.HCM cung cấp thông tin toàn văn dành cho người sử dụng thư viện trong
trường (SV, GV, HVCH, CBVC...) có nhu cầu học tập, nghiên cứu, tham khảo. Để gửi và nhận thông
tin, xin vui lòng liên hệ:
1. Thư viện Đại học Công Nghiệp TP.HCM: Gửi thông tin yêu cầu bằng 1 trong các phương tiện
sau:
18
+ Cổng thông tin Thư viện: http://lib.iuh.edu.vn tại mục "Yêu cầu tin";
+ Facebook: http://facebook.com/libiuh - Gửi qua "Tin nhắn" trên Page;
+ Liên hệ Phòng Nghiệp vụ: Phan Minh Trí – 0919.8989.33 - ĐT: (08) 38940390 (130) - Email:
2. Phòng đảm bảo thông tin của trung tâm thông tin khoa học và công nghệ TP.HCM
Địa chỉ: 79 Trương Định - Q1 - TP.HCM
ĐT: (08)38243826: (08)38297040 Ext: 202-203-216) Fax: 38291957
Website: www.cesti.gov.vn Email: [email protected]
Lưu ý
1/ Khi đến gửi yêu cầu thông tin, bạn nhớ mang theo thẻ sinh viên, thẻ giảng viên của trường.
2/ Thông tin được cung cấp miễn phi, ngoại trừ chi phí: in ấn tài liệu, mua tài liệu (nếu có)
Thư viện Trường Đại học Công nghiệp Thành phố H Chí Minh.