Upload
letu
View
217
Download
2
Embed Size (px)
Citation preview
■SalesSynthetic Pulp Department Nonwovens Division Functional Chemicals Business SectorShiodome City Center, 1-5-2, Higashi-Shimbashi, Minato-ku,Tokyo 105-7117, JapanTel: +81-3-6253-3651 Fax: +81-3-6253-4226
■ResearchFunctional Materials Laboratory5803-32, Nagaura, Sodegaura, Chiba 299-0265, Japan
■ProductionIchihara Works3, Chigusa-Kaigan, Ichihara, Chiba 299-0108, Japan
The information stated herein is based on reference materials and information which are presently available; however, we do not guarantee the printed data and assessment results. The information printed herein to be noted assumes ordinary use of the products. When using the products for an unusual purpose, please implement safety measures appropriate for the purpose and the method of use.
Synthetic pulp [polyethylene]
TM
Polyethylene quasi-cotton fiber
Mitsui Chemicals
Europe
Southeast AsiaOceania
East Asia
North America / South America
We sell SWPTM and KEMIBESTOTM to countries all over the world.
published date:2013.12.17
TMKEMIBESTOMitsui Chemicals,INC.
Mitsui Chemicals,Inc.
Structure(Fibrillation)
Material(Polyolefin)
Dispersion●
Fine paper making●
Viscosity control●
High specific surface area●
Particle entrapment●
Porosity control●
Processability in paper● manufacturing
Freeness●
●Wicking resistance
●Good thixotropy
●Tenacity
●Particle entrapping performance
Property keywords of SWPTM and KEMIBESTOTM
Drying, Fluffing
●Heat sealability
●Thermal adhesion
●Embossibility
●Deep grain retention
●Water/chemical resistance
●Electrical insulation
●Dimensional stability against moisture
●Food safety*1
TM
SWPTM/KEMIBESTOTM is a hydrophilic fibrillated fiber made from polyolefin 100%.
SWPTM and other Fibers(Photomicrographs, 150 times magnification)
SWPTM (E400)Wood pulp Polyolefin cut fiber
High performance which is realized bySWPTM/KEMIBESTOTM
TMKEMIBESTO
※1:If considering to use our products for food or medicinal applications, please consult with us in advance.
SWPTM, a fibrillated polyolefin fiber, realizes distinctive properties such as a high degree of smoothness, whiteness, heat sealability and water-resistance.SWPTM, unprecedented high performance fiber, expands potentiality in various application fields, particularly in paper-related applications.KEMIBESTOTM, dried and fluffed SWPTM, disperses readily in water or organic solvents and is used for a broad range of applications such as coatings and adhesives.
Structure(Fibrillation)
Material(Polyolefin)
Dispersion●
Fine paper making●
Viscosity control●
High specific surface area●
Particle entrapment●
Porosity control●
Processability in paper● manufacturing
Freeness●
●Wicking resistance
●Good thixotropy
●Tenacity
●Particle entrapping performance
Property keywords of SWPTM and KEMIBESTOTM
Drying, Fluffing
●Heat sealability
●Thermal adhesion
●Embossibility
●Deep grain retention
●Water/chemical resistance
●Electrical insulation
●Dimensional stability against moisture
●Food safety*1
TM
SWPTM/KEMIBESTOTM is a hydrophilic fibrillated fiber made from polyolefin 100%.
SWPTM and other Fibers(Photomicrographs, 150 times magnification)
SWPTM (E400)Wood pulp Polyolefin cut fiber
High performance which is realized bySWPTM/KEMIBESTOTM
TMKEMIBESTO
※1:If considering to use our products for food or medicinal applications, please consult with us in advance.
SWPTM, a fibrillated polyolefin fiber, realizes distinctive properties such as a high degree of smoothness, whiteness, heat sealability and water-resistance.SWPTM, unprecedented high performance fiber, expands potentiality in various application fields, particularly in paper-related applications.KEMIBESTOTM, dried and fluffed SWPTM, disperses readily in water or organic solvents and is used for a broad range of applications such as coatings and adhesives.
■Roofing tiles
Food and medicalapplications
Construction andmanufacturing
■Foundation materials for mortar
■Tea bags ■Coffee pods
■Marine coatings■Coatings
■Food containers ■Trays for food and medical use
SWPTM affords heat sealing properties and is used in a variety of applications, such as food packaging and medical services. SWPTM blending enhances moulding property to realize good grain retention.SWPTM is used for environmentally-friendly applications as well as for recycling products.
SWPTM , a highly-fibrillated fiber (multi-branched, high surface area, controlled freeness), shows excellent particle-entrapment, mouldability, thixotropy, viscosity control, crack resistance, dimensional stability and tenacity.It is considered that SWPTM has negligible impact on human health under normal conditions of use.
Major grades for use NL491/E790/E690/E400/AU690
Major grades for use E790/E400 Major grades for use E524/E620/E400/ESS-5/all KEMIBESTOTM grades
Left Company name: Kyoto Pickles Nishiri, product name: Nishiri Semmaizuke, development/production: Suzuki Shofudo Co., Ltd.Middle Company name: Murasakino Wakuden, product name: Kyo-no-Himetsuto, development/production: Suzuki Shofudo Co., Ltd.Right Company name: Murasakino Wakuden, product name: Hassun, development/production: Suzuki Shofudo Co., Ltd.
Base paper: hybrid moulded paper, MaroTM
Heat sealability
Air permeability control
Thermal adhesion
Food safety
Thixotropy
Particle entrapment
Crack resistance
Dispersion
Food safety
Recycling
Grain retention
■Roofing tiles
Food and medicalapplications
Construction andmanufacturing
■Foundation materials for mortar
■Tea bags ■Coffee pods
■Marine coatings■Coatings
■Food containers ■Trays for food and medical use
SWPTM affords heat sealing properties and is used in a variety of applications, such as food packaging and medical services. SWPTM blending enhances moulding property to realize good grain retention.SWPTM is used for environmentally-friendly applications as well as for recycling products.
SWPTM , a highly-fibrillated fiber (multi-branched, high surface area, controlled freeness), shows excellent particle-entrapment, mouldability, thixotropy, viscosity control, crack resistance, dimensional stability and tenacity.It is considered that SWPTM has negligible impact on human health under normal conditions of use.
Major grades for use NL491/E790/E690/E400/AU690
Major grades for use E790/E400 Major grades for use E524/E620/E400/ESS-5/all KEMIBESTOTM grades
Left Company name: Kyoto Pickles Nishiri, product name: Nishiri Semmaizuke, development/production: Suzuki Shofudo Co., Ltd.Middle Company name: Murasakino Wakuden, product name: Kyo-no-Himetsuto, development/production: Suzuki Shofudo Co., Ltd.Right Company name: Murasakino Wakuden, product name: Hassun, development/production: Suzuki Shofudo Co., Ltd.
Base paper: hybrid moulded paper, MaroTM
Heat sealability
Air permeability control
Thermal adhesion
Food safety
Thixotropy
Particle entrapment
Crack resistance
Dispersion
Food safety
Recycling
Grain retention
■Filter
Labels and cards Industrial materials
■Battery separator
■Labels
■Wallpaper
Housingmaterials
■Waterproof / breathable sheet
■Decorative papers
SWPTM has superb thermal adhesion properties, mouldability and chemical resistance, and enables air permeability, owing to its fibrillated structure.
Major grades for use E400/E620
Major grades for use E400/E620/E790
Major grades for use E400/EST-8/UL410/EST-2
Major grade for use E790 Major grade for use E620
Dimensional stabilityThermal adhesion
RecyclingDesigning
DesigningEmbossibility
Whiteness
Air permeability control Designing
Water resistance Bulkiness
Air permeability controlThermal adhesion
Chemical resistance
Air permeability control
Water resistance
SWPTM made from polyolefin, adheres to containers made of the same material.SWPTM has outstanding printing features, which will enhance designs.SWPTM-blended paper has fine embossibility and enhances three dimensional and transparent designs.
SWPTM is used in construction materials such as wallpaper and breathable sheets (synthetic paper made from 100% SWPTM, etc.) because of its outstanding properties for embossing, dimensional stability and air permeability control.
■Filter
Labels and cards Industrial materials
■Battery separator
■Labels
■Wallpaper
Housingmaterials
■Waterproof / breathable sheet
■Decorative papers
SWPTM has superb thermal adhesion properties, mouldability and chemical resistance, and enables air permeability, owing to its fibrillated structure.
Major grades for use E400/E620
Major grades for use E400/E620/E790
Major grades for use E400/EST-8/UL410/EST-2
Major grade for use E790 Major grade for use E620
Dimensional stabilityThermal adhesion
RecyclingDesigning
DesigningEmbossibility
Whiteness
Air permeability control Designing
Water resistance Bulkiness
Air permeability controlThermal adhesion
Chemical resistance
Air permeability control
Water resistance
SWPTM made from polyolefin, adheres to containers made of the same material.SWPTM has outstanding printing features, which will enhance designs.SWPTM-blended paper has fine embossibility and enhances three dimensional and transparent designs.
SWPTM is used in construction materials such as wallpaper and breathable sheets (synthetic paper made from 100% SWPTM, etc.) because of its outstanding properties for embossing, dimensional stability and air permeability control.
Mitsui Chemicals
■Blotting paper ■Air-laid sheets ■Cotton pads
■Boards for construction use ■Speaker cones
■Conductive papers■Printing papers ■Wrapping papers
■Grass mat
■Moulded pulp ■Formable board (for vehicles)
Penetrating into thevarious fields
Papers blended with SWPTM facilitate embossing and grain retention, and realize deeper design imprints than ordinary paper.SWPTM, which has the characteristics of both natural pulp and polyolefin, is able to confer advantages of its high performance in various fields.
Mitsui Chemicals
■Blotting paper ■Air-laid sheets ■Cotton pads
■Boards for construction use ■Speaker cones
■Conductive papers■Printing papers ■Wrapping papers
■Grass mat
■Moulded pulp ■Formable board (for vehicles)
Penetrating into thevarious fields
Papers blended with SWPTM facilitate embossing and grain retention, and realize deeper design imprints than ordinary paper.SWPTM, which has the characteristics of both natural pulp and polyolefin, is able to confer advantages of its high performance in various fields.
FDSS-5
FDSS-2
FDSS-50
FD380
FD780
FD990
0.1≧
0.6
0.1≧
0.7
1.6
2.0
1≧
Standard
Standard
Standard
Coarse
Coarse
Very coarse
135
GradeMeltingpoint(°C)
CFL (mm) Wetness coarseness Maincharacteristics
Good thixotropyCrack resistance
Highly hydrophilic
Mitsui Chemicals
App
licat
ions
Adva
ntag
e
Coatings, adhesives,sealing materials
Constructionmaterials
Nonwovenfabric
Others
Protective coating(underseal coatings)
Roof coatingsCoatings for pavingTraffic line coatings
Spray coatingsPuttyFRP
Dry lining boardsSealants
Good thixotropyCrack resistance
Wicking resistanceThermal adhesion
Hydrophobic
CushionsCovers
Laminated materials
Thermal adhesionFlexibility
Air permeabilityHeat sealability
Inorganic fillerComposite materials
Thermal adhesionDispersion
Particle entrapment
Grades
Type E(PE)
E400
E524
E620
E790
E690
EST-8
EST-2
E780
ESS-5
ESS-2
ESS-50
E990
E380
135
63
57
64
53
50
59
59
36
50
47
39
50
50
55
52
55
0.9
1.2
1.2
1.3
1.5
0.9
0.9
1.6
0.6
0.7
2.0
1.0
1.2
1.0
580
340
340
700
680
470
540
-
-
-
-
-
-
720
680
600
Standard
Standard
Standard
Standard
Standard
Fine
Fine
Very Coarse
Coarse
Standard
Standard
Standard
Type grade Meltingpoint(°C)
CSF (cc) CFL (mm) Wetness CoarsenessMain
characteristicsMain
application
Good thixotropyCrack resistance
Outstandingtexture
Papers, constructionmaterials
Construction materials
Papers, constructionmaterials
Speciality papers
Coatings, adhesives
Binder for drylaidnonwoven fabric
Very finefibers
Good fiberbinding
Long fibersHigh filtration
High filtration
Type NL(denatured PE)
Type AU(denatured PE)
Type UL(PE)
NL491
AU690
UL410
Coarse
Coarse
Coarse
Coarse
100
120
125Low melting point
Outstanding texturePapers, construction
materials
Tea bagsCoffee pods
Tea bagsCoffee pods
Highly adhesiveLow melting point
Hot tackLow melting point
Long fibers
Highly hydrophilic
Pap
er m
anuf
actu
ring
grad
esD
ry p
roce
ss g
rade
sPa
per ma
nufact
uring g
rades
0.1≧
0.1≧
■SWPTM grades ■KEMIBESTOTM grades
■Application of KEMIBESTOTM
FDSS-5
FDSS-2
FDSS-50
FD380
FD780
FD990
0.1≧
0.6
0.1≧
0.7
1.6
2.0
1≧
Standard
Standard
Standard
Coarse
Coarse
Very coarse
135
GradeMeltingpoint(°C)
CFL (mm) Wetness coarseness Maincharacteristics
Good thixotropyCrack resistance
Highly hydrophilic
Mitsui ChemicalsA
pplic
atio
nsAd
vant
age
Coatings, adhesives,sealing materials
Constructionmaterials
Nonwovenfabric
Others
Protective coating(underseal coatings)
Roof coatingsCoatings for pavingTraffic line coatings
Spray coatingsPuttyFRP
Dry lining boardsSealants
Good thixotropyCrack resistance
Wicking resistanceThermal adhesion
Hydrophobic
CushionsCovers
Laminated materials
Thermal adhesionFlexibility
Air permeabilityHeat sealability
Inorganic fillerComposite materials
Thermal adhesionDispersion
Particle entrapment
Grades
Type E(PE)
E400
E524
E620
E790
E690
EST-8
EST-2
E780
ESS-5
ESS-2
ESS-50
E990
E380
135
63
57
64
53
50
59
59
36
50
47
39
50
50
55
52
55
0.9
1.2
1.2
1.3
1.5
0.9
0.9
1.6
0.6
0.7
2.0
1.0
1.2
1.0
580
340
340
700
680
470
540
-
-
-
-
-
-
720
680
600
Standard
Standard
Standard
Standard
Standard
Fine
Fine
Very Coarse
Coarse
Standard
Standard
Standard
Type grade Meltingpoint(°C)
CSF (cc) CFL (mm) Wetness CoarsenessMain
characteristicsMain
application
Good thixotropyCrack resistance
Outstandingtexture
Papers, constructionmaterials
Construction materials
Papers, constructionmaterials
Speciality papers
Coatings, adhesives
Binder for drylaidnonwoven fabric
Very finefibers
Good fiberbinding
Long fibersHigh filtration
High filtration
Type NL(denatured PE)
Type AU(denatured PE)
Type UL(PE)
NL491
AU690
UL410
Coarse
Coarse
Coarse
Coarse
100
120
125Low melting point
Outstanding texturePapers, construction
materials
Tea bagsCoffee pods
Tea bagsCoffee pods
Highly adhesiveLow melting point
Hot tackLow melting point
Long fibers
Highly hydrophilic
Pap
er m
anuf
actu
ring
grad
esD
ry p
roce
ss g
rade
sPa
per ma
nufact
uring g
rades
0.1≧
0.1≧
■SWPTM grades ■KEMIBESTOTM grades
■Application of KEMIBESTOTM
■Photomicrographs
■Heat sealing strength and hot tack property
Mitsui ChemicalsTechnical information
Standard fiber (E400) Fine fiber (EST-8)
■Mapping CFL against CSF
■Heat sealing strength: expressed by peeling strength (the higher, the better) Force required to peel heat sealed part with width of 15mm.
■Hot tack property: expressed by the length of the peeled portion (the shorter, the better) Length of peeled portion when a peel force (0.1N/10mm) is applied immediately after heat sealing.
0.0
800
700
600
500
300
400
0.5 1.5 2.0 2.51.0 CFL (mm)
CSF
(cc)
E400
E620
E990E790E690
AU690
NL491
UL410
EST-8
EST-2
110 120 130 140 150 160 170 180 190 200
3.0
2.5
2.0
1.5
0.0
0.5
1.0
Heat sealing temperature (°C)
Peel
ing
stre
ngth
(N/1
5mm
)
E790
AU690
NL491
120 130 140 150 160 170 180 190 200
250
200
150
100
0.0
50
Heat sealing temperature (°C)
Leng
th o
f pee
led
porti
on (m
m)
E790
AU690
NL491
Assessed samplesTwo-layered paper [base layer: 12g/㎡ (abaca pulp), heat sealing layer: 5g/㎡ (80% SWPTM, 20% NBKP)]
■Photomicrographs
■Heat sealing strength and hot tack property
Mitsui ChemicalsTechnical information
Standard fiber (E400) Fine fiber (EST-8)
■Mapping CFL against CSF
■Heat sealing strength: expressed by peeling strength (the higher, the better) Force required to peel heat sealed part with width of 15mm.
■Hot tack property: expressed by the length of the peeled portion (the shorter, the better) Length of peeled portion when a peel force (0.1N/10mm) is applied immediately after heat sealing.
0.0
800
700
600
500
300
400
0.5 1.5 2.0 2.51.0 CFL (mm)
CSF
(cc)
E400
E620
E990E790E690
AU690
NL491
UL410
EST-8
EST-2
110 120 130 140 150 160 170 180 190 200
3.0
2.5
2.0
1.5
0.0
0.5
1.0
Heat sealing temperature (°C)
Peel
ing
stre
ngth
(N/1
5mm
)
E790
AU690
NL491
120 130 140 150 160 170 180 190 200
250
200
150
100
0.0
50
Heat sealing temperature (°C)
Leng
th o
f pee
led
porti
on (m
m)
E790
AU690
NL491
Assessed samplesTwo-layered paper [base layer: 12g/㎡ (abaca pulp), heat sealing layer: 5g/㎡ (80% SWPTM, 20% NBKP)]
■Thixotropic property
■Dimensional stability against moisture and embossibility
Blending (%) Heat treatment(2 minutes) Elongation EmbossibilityThickness Basis weight
Wood pulp SWPTM
E400 ℃ mm g/㎡ % Assessedwith 5 levels
100
90
80
70
0
10
20
30
125145125145125145125145
0.1250.1250.1250.1250.1250.1250.1250.125
1.250.951.251.000.750.300.550.05
111111112110112113114111
21223254
SWPTM package
Package (Bale) wrapped with polyethylene film of approximately 70cm (length) x 60cm (width) x 65cm (height) contains 150 - 170 wet sheets. The gross weight of each package (bale) varies according to the grade.
・Typical gross weightType E: 210kgType UL: 190kgTypes NL, AU: 170kg
Air-dry weight (ADkg) is stated on the label on each bale.Air-dry weight is used as the invoiceable unit of SWPTM containing10% water.Air-dry weight = total weight x (100 - moisture percentage) /90
KEMIBESTOTM packageMagnified photograph
1BL Palletized
01
10
100
10 20 30 40 50 60 70
Rotation (rpm)
Vis
cosi
ty (P
a-s)
■Solution measured
Epoxy resin Benzyl alcohol KEMIBESTOTM (1PHR)
104 16 1.2
Level 1: possible to see part where deeply embossed, but only faintly
Level 2: possible to see part of embossed pattern
Level 3: possible to see all of embossed pattern
Level 4: The original embossed pattern mostly remains unchanged
Level 5: Good quality embossed pattern
Mitsui ChemicalsPackage
●FD990 2.04●FDSS-2 2.14●FD380 1.82●FD780 1.77●FDSS-5 1.74
Thixo index
Technical information
Elongation: measured immediately after removing moisture from the surface of tested samples which had been soaked in water at 23°C for 20 minutes.Embossibility: state of mesh embossing, which had been loaded with a surface pressure of 1MPa at a temperature of 150°C, observed after soaking in water at 23°C for 5 minutes and then dried.
KEMIBESTOTM is sold in paper bags of approximately 95cm (length) x 50cm (width) x 15cm (height) containing 5kg of KEMIBESTOTM.
■Thixotropic property
■Dimensional stability against moisture and embossibility
Blending (%) Heat treatment(2 minutes) Elongation EmbossibilityThickness Basis weight
Wood pulp SWPTM
E400 ℃ mm g/㎡ % Assessedwith 5 levels
100
90
80
70
0
10
20
30
125145125145125145125145
0.1250.1250.1250.1250.1250.1250.1250.125
1.250.951.251.000.750.300.550.05
111111112110112113114111
21223254
SWPTM package
Package (Bale) wrapped with polyethylene film of approximately 70cm (length) x 60cm (width) x 65cm (height) contains 150 - 170 wet sheets. The gross weight of each package (bale) varies according to the grade.
・Typical gross weightType E: 210kgType UL: 190kgTypes NL, AU: 170kg
Air-dry weight (ADkg) is stated on the label on each bale.Air-dry weight is used as the invoiceable unit of SWPTM containing10% water.Air-dry weight = total weight x (100 - moisture percentage) /90
KEMIBESTOTM packageMagnified photograph
1BL Palletized
01
10
100
10 20 30 40 50 60 70
Rotation (rpm)
Vis
cosi
ty (P
a-s)
■Solution measured
Epoxy resin Benzyl alcohol KEMIBESTOTM (1PHR)
104 16 1.2
Level 1: possible to see part where deeply embossed, but only faintly
Level 2: possible to see part of embossed pattern
Level 3: possible to see all of embossed pattern
Level 4: The original embossed pattern mostly remains unchanged
Level 5: Good quality embossed pattern
Mitsui ChemicalsPackage
●FD990 2.04●FDSS-2 2.14●FD380 1.82●FD780 1.77●FDSS-5 1.74
Thixo index
Technical information
Elongation: measured immediately after removing moisture from the surface of tested samples which had been soaked in water at 23°C for 20 minutes.Embossibility: state of mesh embossing, which had been loaded with a surface pressure of 1MPa at a temperature of 150°C, observed after soaking in water at 23°C for 5 minutes and then dried.
KEMIBESTOTM is sold in paper bags of approximately 95cm (length) x 50cm (width) x 15cm (height) containing 5kg of KEMIBESTOTM.
■SalesSynthetic Pulp Department Nonwovens Division Functional Chemicals Business SectorShiodome City Center, 1-5-2, Higashi-Shimbashi, Minato-ku,Tokyo 105-7117, JapanTel: +81-3-6253-3651 Fax: +81-3-6253-4226
■ResearchFunctional Materials Laboratory5803-32, Nagaura, Sodegaura, Chiba 299-0265, Japan
■ProductionIchihara Works3, Chigusa-Kaigan, Ichihara, Chiba 299-0108, Japan
The information stated herein is based on reference materials and information which are presently available; however, we do not guarantee the printed data and assessment results. The information printed herein to be noted assumes ordinary use of the products. When using the products for an unusual purpose, please implement safety measures appropriate for the purpose and the method of use.
Synthetic pulp [polyethylene] [polypropylene]
TM
Polyethylene quasi-cotton fiber
Mitsui Chemicals
Europe
Southeast AsiaOceania
East Asia
North America / South America
We sell SWPTM and KEMIBESTOTM to countries all over the world.
published date:2013.12.17
TMKEMIBESTOMitsui Chemicals,INC.
Mitsui Chemicals,Inc.