Contact Area : 30μ'' min.Gold

Prepared

Spec No.

Description：

Revision

Checked

RUP17046-00Update Date

A

Approved

Customer P/N：

RUP-ZZ-0064UDE P/N：

LED:L-Green/Orange,R-Yellow

10/100/1000 Base-T

To：

2017/4/18

Through HoleRJ45 Tab up over USB3.1 Gen1 stack

Spec No. : RUP17046-00 RUP-ZZ-00641. MECHANICAL DIMENSION

1.1 Product Dimension

www.ude-corp.com

± 0.38± 0.20

- 1 -2017/4/18

Unit: mm General Tolerance : X.X :X.XX :

Spec No. : RUP17046-00 RUP-ZZ-00641.2 Recommended PCB Layout

Component Side of Board

All dimension tolerances are ±0.05mm unless otherwise specified

Table1

X--Forbid; O--OK; NA--Not Applicable.

www.ude-corp.com

X O

TestPoint Via Hole PTH NPTH

X O

X ONA O NA O

Bottom side O O O O O

Component side X X O X

Layout Layer

compo-nent

Groun-ding

- 2 -2017/4/18

Trace

X

Inner layer O

Spec No. : RUP17046-00 RUP-ZZ-00641.3 Recommended Panel Cutout

1.4 Packing Information

40 pcs finished goods per tray

5 trays(200 pcs finished goods) per inner box

4 Inner boxes(800 pcs finished goods) per master carton

www.ude-corp.com- 3 -2017/4/18

Spec No. : RUP17046-00 RUP-ZZ-00641.5

- All dimensions follow :

FCC subpart F, 68,500, Figure (C)(2)(i) & (C)(2)(ii) & (C)(3)(i)

IEC 60603-7

- All plugs must be meeting the requirements of plug Go & No-Go gauge.

Gauge follow : FCC subpart F, 68,500, Figure (C)(4)(i) & (C)(5)(i)

- There must be no damage to Housing and Locking Latch.

- There must be no nicks and cuts in cable.

- Durability : 750 cycles generally

www.ude-corp.com2017/4/18 - 4 -

Standard RJ45 Plug Specification

Spec No. : RUP17046-00 RUP-ZZ-00641.6

www.ude-corp.com

Standard USB 3.0 Plug Specification

- All dimensions follow : Universal Serial Bus 3.0 Specification, Revision 1.0. Figure 5-2. USB 3.0 Standard Plug-A interface dimensions - Non-dimensions geometry for reference only, subjece to change. - Drawing for mating interface dimensions only. Views may not show realistic manufacturing condition.

2017/4/18 - 5 -

Spec No. : RUP17046-00 RUP-ZZ-00642. REQUIREMENTS

2.1 Design and Construction

2.2 Material2.2.1 Terminal Parts (Underplating : 50μ" min. Nickel overall)

2.2.1.1 RJ Terminal : Phosphor Bronze, Thickness=0.30mmFinish : Contact Area : 30μ" min. Gold Solder Tail : 100μ" min. Bright Tin

2.2.1.2 USB 2.0 Terminal :Phosphor Bronze, Thickness=0.25mmFinish : Contact Area : 30μ" min. Gold Solder Tail : 100μ" min. Matte Tin

2.2.1.3 USB 3.1 Terminal : Brass, Thickness=0.25mmFinish : Contact Area : 30μ" min. Gold Solder Tail : 100μ" min. Matte Tin

2.2.1.4 Input Terminal : Brass, Thickness=0.35mmFinish : 100μ" min. Matte Tin

2.2.1.5 Case Terminal : CP Wire, Diameter=0.40mmFinish : 100μ" min. Bright Tin

2.2.1.6 LED Terminal : Brass, Thickness=0.35mmFinish : 100μ" min. Matte Tin

2.2.2 Plastic Parts <UL94V-0>2.2.2.1 RJ Housing : PBT, Black 2.2.2.2 Spacer : PBT, Black 2.2.2.3 Case : PF2A5-151J,Black 2.2.2.4 USB Housing : PA9T, Blue(300C)2.2.2.5 USB Back Cover : PA9T, Blue(300C)

2.2.3 Shield Parts2.2.3.1 Front Shield : Stainless Steel, Thickness=0.25mm, unplating2.2.3.2 Back Shield : Stainless Steel, Thickness=0.20mm, Pre-soldering

www.ude-corp.com2017/4/18 - 6 -

Product shall be of design, construction and physical dimensions specifiedon applicable.

Spec No. : RUP17046-00 RUP-ZZ-00642.3 Operating and Storage Temperature

2.4 RJ45 specifications

Insertion force with the latch depressed :

2.5 USB 3.1 specifications

1A

30mΩ Max.

500Vac @1min

2.6 Performance and Test Description

2.7 Packaging and Packing

www.ude-corp.com

Removal force with the latch depressed :

Insulation Resistance :

-40°C to +85°C

50N min. @ 60+/-5 sec

Contact Current Rating:

1000MΩ min.

Product is designed to meet electrical, mechanical and environmentalperformance requirements specified in below table. All tests are performedat ambient environmental conditions per MIL-STD-1344A and EIA-364unless otherwise specified.

Durability : 1500 cycles for standard class

20N max.

Durability :

Locking Force of Plug Latch :

Insertion force : 35 N max at a max. rate of 12.5mm per minute

Dielectric Withstanding Voltage :

Storage Temperature :

20N max.

- 7 -2017/4/18

All parts shall be packaged and packed to protect against physicaldamage、corrosion and deterioration during shipment and storage.

Extraction force :

0°C to +70°C

10 N min and 8 N after the specified insertion/extraction

Operating Temperature :

Contact Resistance:

2500 cycles

500MΩ min.

Insulation Resistance :

Spec No. : RUP17046-00 RUP-ZZ-00643. ELECTRICAL CHARACTERISTICS @ 25℃

3.1 Schematic

www.ude-corp.com

OrangeGreen 1.7 ~2.6 V

Emitting Color λp (nm) Vf @If=20mA

1.7 ~2.6 V 10μA max.10μA max.

605570

Ir @Vr=5V

- 8 -2017/4/18

Yellow 588 1.7 ~2.6 V 10μA max.

VCC R1

TD1+ R2

TD1- R3

TD2+ R4

TD2- R5

TD3+ R6

TD3- R7

TD4+ R8

TD4- R9

GND R10

C1 TX1+

C2 TX1-

C3 TX2+

C6 TX2-

C4 TX3+

C5 TX3-

C7 TX4+

C8 TX4-

1：1

1：1

1：1

1：1

75Ω

75Ω

75Ω

75Ω

0.1uF

0.1uF

0.1uF

0.1uF

PHY Side(Input)

Cable Side(RJ45 Output)

2KV 1000pF

Shield

L3

L4

GreenOrange Yellow

L1

L2

Spec No. : RUP17046-00 RUP-ZZ-00643.2 Transmitter filter & Receiver filter

Type : Balance low pass 100Ω impedance

Insertion loss :

Return loss :

3.3 Common Mode Rejection

-30dB min.

3.4 Cross Talk

-30dB min.

3.5 Inductance @ 100KHz, 0.1V, 8mA DC BIAS

3.6 HiPot Test

To

To

To

To

www.ude-corp.com

Input(R8-R9)

Input(R6-R7)

Input(R4-R5)

@ 1~100 MHz

load 100Ω

@ 1~100 MHz

1~100 MHz -1.0dB max.

1~30 MHz -18dB min.

- 9 -

Output(C1-C2) :

Output(C4-C5) :

2017/4/18

60~80MHz -12dB min.

Input(R2-R3), Input(R4-R5), Input(R6-R7), Input(R8-R9) : 350 μH min.

Input(R2-R3)

-10dB min.

-16dB min.

load 100Ω

load 100Ω

1500Vac 60s or 2250Vdc 60s

1500Vac 60s or 2250Vdc 60s

30~60MHz

80~100MHz

Output(C3-C6) :

1500Vac 60s or 2250Vdc 60s

1500Vac 60s or 2250Vdc 60sOutput(C7-C8) :

load 100Ω

Spec No. : RUP17046-00 RUP-ZZ-00644. DIPPING TEMPERATURE PROFILE

www.ude-corp.com2017/4/18 - 10 -

Spec No. : RUP17046-00 RUP-ZZ-00645. Revision History

www.ude-corp.com

2017/4/18

2017/4/18 - 11 -

Issue Date Revision Comments

A Initial Release . Soil

Operator