Truyen thong giua S7-200 và bien tan qua mạng USS 1

06/07/2013 Truyn thng gia S7-200 v bin tn qua mng USS [Lu tr] - PLC Vit Nam - PLC Support - T ng ha

plcvietnam.com.vn/forum/archive/index.php/t-680.html 1/23

hiennguyen

kidsolo1412

kidsolo1412

anhlv.ddt

kidsolo1412

PDA

PLC Vit Nam - PLC Support - T ng ha > T NG HO V NG DNG > SIEMENS AUTOMATION > BIN TN& DRIVE > Truyn thng gia S7-200 v bin tn qua mng USS

View Full Version : Truyn thng gia S7-200 v bin tn qua mng USS

08-22-2011, 09:35 AM

c pro no lm qua vn ny xin ch gio mi ngi cng hc hi nhe :)

08-22-2011, 12:20 PM

Bn lm oc ti phn no riUSS gm 4 khi chnh USS_INIT :khai bo,USS CTRL: chc nng control ,USS READ v WRITE :c v ghi thams xung bin tn

Ch h tr dng MM ca Siemen

08-22-2011, 12:22 PM

Bn lm oc ti phn no riUSS gm 4 khi chnh USS_INIT :khai bo,USS CTRL: chc nng control ,USS READ v WRITE :c v ghi thams xung bin tn

Ch h tr dng MM ca Siemen

08-22-2011, 12:42 PM

c pro no lm qua vn ny xin ch gio mi ngi cng hc hi nhe :) thc hin truyn thng USS gia PLC v bin tn chng ta cn thao tc- Ci t bin tn - Lp trnh PLC s dng th vin lnh USS1. Lp trnh PLCDoWn th vin lnh ti y:http://www.mediafire.com/?d7waosuvx20c005- Trong s dng cc lnh USS_INIT, USS_CTRL, USS_R v USS_W+ Lnh USS_INITKhi to ch truyn thng USShttp://direct2.anhso.net/original/0/6850/228201111347596.JPG- Chn Mode cho php hoc khng cho php ch USSMode = 0 - Khng cho php USSMode = 1- Cho php khi to USSC th dng chc nng ny thit lp ch USS cho Port 0 (vi PLC c 1 cng) lc lm vic vi USS. lc lmvic vi freeport bng chng trnh.- Chn Baud: chn tc truyn trong mng: (9600)- Chn Active: 16#1- Chn Done: bo Ch USS c khi to- Chn error: lu trng thi li

08-22-2011, 01:50 PM

thc hin truyn thng USS gia PLC v bin tn chng ta cn thao tc- Ci t bin tn - Lp trnh PLC s dng th vin lnh USS1. Lp trnh PLCDoWn th vin lnh ti y:http://www.mediafire.com/?d7waosuvx20c005- Trong s dng cc lnh USS_INIT, USS_CTRL, USS_R v USS_W+ Lnh USS_INITKhi to ch truyn thng USShttp://direct2.anhso.net/original/0/6850/228201111347596.JPG- Chn Mode cho php hoc khng cho php ch USSMode = 0 - Khng cho php USSMode = 1- Cho php khi to USSC th dng chc nng ny thit lp ch USS cho Port 0 (vi PLC c 1 cng) lc lm vic vi USS. lc lmvic vi freeport bng chng trnh.



anhlv.ddt

anhlv.ddt

anhlv.ddt

- Chn Baud: chn tc truyn trong mng: (9600)- Chn Active: 16#1- Chn Done: bo Ch USS c khi to- Chn error: lu trng thi liActive:s a ch bin tn c kch hot s dng

08-22-2011, 03:14 PM

Active:s a ch bin tn c kch hot s dng

ng ri qun ko ni r,ti cu kia hi 1 bin tn nn khng , hiii

09-05-2011, 12:44 AM

+ Lnh USS_CTRL68Ch mt lnh USS _CTRL c n nh cho mi Drive. - Bit EN phi c set ln mi cho php lnh USS_CTRL thc hin. Lnh ny lun mc cao (mc cho php).- RUN (RUN/STOP) cho thy drive l on hoc off. Khi bit RUN mc cao, MM nhn lnh khi ng tc danhnh v theo chiu chn trc. Drive lm vic, cc iu kin phi theo ng nh sau:+ a ch Drive phi c la chn t u vo Active trong lnh USS_INIT. + u vo OFF2 v OFF3 phi c set 0. + Cc u ra Fault v Inhibit phi l 0. - Khi u vo RUN l OFF, mt lnh c chuyn n MM iu khin gim tc ng c xung cho n khing c dng. - u vo OFF2 c s dng cho php iu khin MM dng vi tc chm. - u vo OFF3 c s dng cho php iu khin MM dng vi tc nhanh. - Bit Resp_R bo nhn phn hi t Drive. Tt c cc hot ng ca MM c thm d thng tin trng thi. Ti mithi im, S7-200 nhn mt phn hi t Drive, bit Resp_R c set ln v tt c cc gi tr tip theo c cpnht.- Bit F_ACK (Fault Acknowledge) c s dng nhn bit li t Drive. Cc li ca Drive c xo khi F_ACKchuyn t 0 ln 1. - Bit Dir (Direction) xc nh hng quay m MM s iu khin. - u vo Drive (Drive address) l a ch ca MM m lnh USS_ CTRL iu khin ti. a ch hp l: 0 n 31.- u vo Type (Drive type) dng la chn kiu MM. i vi th h MM3 (hoc sm hn) u vo Type ct 0; cn i vi MM4 gi tr t l 1.- Speed-SP (speed setpoint): l tc cn t theo t l phn trm. Cc gi trm s lm ng c quay theo chiungc li. Phm vi t: -200% 200%. - Error: l mt byte li cha kt qu mi nht ca yu cu truyn thng n Drive. - Status: l mt word th hin gi tr phn hi t bin tn.- Speed l tc ng c theo t l phn trm. Phm vi: -200% n 200%.- D-Dir: cho bit hng quay. - Inhibit: cho bit tnh trng ca the inhibit bit on the drive (0 - not inhibit, 1- inhibit ). xo bit inhibit ny, bitFault phi tr v off, v cc u vo RUN, OFF2,OFF3 cng phi tr v off.- Fault: cho bit tnh trng ca bit li ( 0 - khng c li, 1- li ). Drive s hin th m li. xo bit Fault, cn phicha li xy ra li v set bit F_ACK.

09-05-2011, 01:09 AM

Ci t bin tn:Vi MM440 bn set cc thng s theo trnh t sau:- Reset ci t li cho h thng (tu chn):P0010 = 30P0970 = 1Nu b qua bc ny, cc thng s tip theo s c set theo cc gi tr:USS PZD length: P2012 Index0 = 2USS PKW length: P2013 Index0 = 127- Cho php truy nhp c/ghi cc thng s:P0003 = 3- Kim tra ci dt thng s ng c cho bin tn:P0304 = in p ng c (V)P0305 = dng in ng c (A)P0307 = cng sut ng c (W)P0310 = tn s ng c (Hz)P0311 = tc ng c (RPM)Cc thng s ci t ny c th thay i tu thuc vo loi ng c c s dng.



tranvu.tnt

anhlv.ddt

Trc khi ci t cc thng s P0304, P0305, P0307, P0310, P0311, cn thit phi set thng s P0010 ln 1 trc.Sau khi kt thc vic ci t, t thng s P0010 v 0. Cc thng s P0304, P0305, P0307, P0310, P0311 ch cth thay i trong ch quick commissioning.- nh ch iu khin t xa hay ti ch (Local / Remove):P0700 Index0 = 5- t la chn tn s setpoint cho USS cng COMP1000 Index0 = 5- nh thi gian tng tc (tu chn), l thi gian ng c tng tc n tc max:P1120 = 0 650,00 (s).- nh thi gian gim tc (tu chn), l thi gian ng c gim dn tc cho n khi dng:P1121 = 0 650,00 (s).- t tn s tham chiu:P2000 = 1 n 650 Hz- Tiu chun ho USS:P2009 Index0 = 0- t gi tr tc baud cho chun RS-485:P2010 Index0 = 4 (2400 baud)P2010 Index0 = 5 (4800 baud)P2010 Index0 = 6 (9600 baud)P2010 Index0 = 7 (19200 baud)P2010 Index0 = 8 (38400 baud)P2010 Index0 = 9 (57600 baud)P2010 Index0 = 10 (115200 baud)- Nhp a ch bin tn:P2011 Index0 = 0 n 31- t thi gian trng gia hai bc in, y l khong thi gian cho php gia hai ln truy nhp d liu bc in.N c s dng ct bin tn trong khong thi gian xy ra li truyn thng. Thi gian ny tnh t lc sau khimt d liu hp l ca bc in c nhn. Nu c mt d liu khng c nhn, bin tn s ngt v hin th mli F0070. t gi tr 0 ngng iu khin.P2014 Index0 = 0 n 65,535 ms- Chuyn d liu t RAM n EEPROM:P0971 = 1 (bt u chuyn).Lu ci t s thay i cc thng s vo EEPROM.Nh vy bn c th iu khin ng c chy, dng, o chiu thng qua USSP/S; Gi em cng ng mai i lm, ti mai vit tip v lnh c v ghi ^^!

09-13-2011, 11:03 AM

anh i em hi mt cht. cch chuyn USS trong bin tn 430 nh th no vy? em c bi ton nh sau mong ccanh ch dm. em c tn hiu 4-20ma ca senser p sut a vo AI ca CPU 224XP iu khin bm nc bng bin tn 430ca siemens . mong anh ch dm em. trn thnh cm n

09-13-2011, 11:10 AM

anh i em hi mt cht. cch chuyn USS trong bin tn 430 nh th no vy? em c bi ton nh sau mong ccanh ch dm. em c tn hiu 4-20ma ca senser p sut a vo AI ca CPU 224XP iu khin bm nc bng bin tn 430ca siemens . mong anh ch dm em. trn thnh cm nVi bin tn MM430 bn vn s dng USS c bnh thng, nhng ci t c khc cht t.

Ci t bin tn th h 3: Trc khi kt ni n S7-200, cn phi chc chn rng c cc thng s ca bin tn. S dng cc keypad csn trn bin tn ci t nh sau: - Reset bin tn ci t li (tu chn). Nhn phm P: hin th P000. Nhn phm mi tn ln hoc xung cho nkhi hin th P944. Nhn P nhp thng s: P944 = 1 - Cho php truy xut c / ghi tt c cc thng s. Nhn P, nhn phm mi tn ln hoc xung cho n khihin th P009. Nhn P nhp: P009 = 3 - Kim tra li vic ci t thng s ng c cho bin tn. Vic ci t ny phi theo loi ng c c s dng.Nhn P, nhn phm mi tn ln hoc xung cho n khi hin th thng s cn ci t. Nhn P nhp: P081 = Tn s nh mc ca ng c (Hz). P082 = Tc nh mc ca ng c (RPM). P083 = Dng in nh mc ca ng c (A). P084 = in p nh mc ca ng c (V). P085 = Cng sut nh mc ca ng c (KW/HP). - t ch iu khin ti ch hay t xa (Local / Remove). Nhn P, nhn phm mi tn ln hoc xung cho nkhi hin th P910. Nhn P nhp: P910 = 1 (Remove) - nh gi tr tc Baud cho chun RS-485. Nhn P, nhn phm mi tn ln hoc xung cho n khi hin th



tranvu.tnt

tranvu.tnt

anhlv.ddt

daocongdabl

tienkhung_cntd

anhlv.ddt

P092. Nhn P nhp, nhn phm mi tn hin th ng gi tr tc Baud cho chun RS-485: P092 = 3 (1200 baud) P092 = 4 (2400 baud) P092 = 5 (4800 baud) P092 = 6 (9600 baud - chun) P092 = 7 (19200 baud) - Nhp a ch cho bin tn. Mi bin tn (ti a 31) c th vn hnh qua mt bus. Nhn P, nhn phm mi tn lnhoc xung cho n khi hin th P091. Nhn P nhp. Nhn phm mi tn hin th a ch mong mun, nhn Pnhp: P091 = 0 - 31 - nh thi gian tng tc (tu chn). Vi thi gian t ny tc ng c s tng dn cho n khi t max. NhnP, nhn phm mi tn ln hoc xung cho n khi hin th P002. Nhn P nhp: P002 = 0 - 650.00 - nh thi gian gim tc (tu chn). Sau khong thi gian ny ng c s gim n tc cho n khi dng.Nhn P, nhn phm mi tn ln hoc xung cho n khi hin th P003. Nhn P nhp: P003 = 0 - 650.00 - Serial Link Time-out. y l khong thi gian ln nht cho php gia hai ln truy nhp d liu. Thi gian ny c tnh sau khi mt d liu c nhn. Nu mt d liu ca bc in khng c nhn, bin tns ngt v hin th m li F008. t gi tr 0 ngng vic iu khin. Nhn P, nhn phm mi tn ln hoc xung cho n khi hin th P093. Nhn P nhp. Nhn phm mi tn nhp gi tr mong mun: P093 = 0 - 240 (thi gian c tnh bng giy) - Serial Link Nominal System Setpoint. Gi tr ny c th thay i, nhng phi tng ng 50Hz hoc 60Hz, cnh ngha tng ng vi gi 100% gi tr cho PV hoc SP. Nhn P, nhn phm mi tn ln hoc xung cho n khihin th P094. Nhn P nhp. Nhn cc phm mi tn chn gi tr mong mun: P094 = 0 - 400.00 - Tng thch USS (tu chn). Nhn P, nhn phm mi tn ln hoc xung cho n khi hin th P095. Nhn P nhp: P095 = 0 phn gii 0,1Hz P095 = 1 phn gii 0,01Hz - EEPROM iu khin (tu chn). Nhn P, nhn phm mi tn ln hoc xung cho n khi hin th P971. Nhn P nhp: P971 = 0: Thay i cc thng s ci t (bao gm c P971) b mt khi mt ngun. P971 = 1: Tham s ci t c lu li trong sut thi gian mt ngun. - Hin th vn hnh. Nhn P thot.

09-13-2011, 11:42 AM

anh em ang vng ch cch khai bo trong USS . anh c th ni r hn cho em ddc khng.

09-13-2011, 12:07 PM

anh ANHLV.DDT i ? anh c th ni r hn v phng thc truyn trong USS c khng anh? em vn cha dnhv n lm. nu anh c th ch lun vi bi ton ca em ddc khng anh?

09-13-2011, 01:09 PM

anh em ang vng ch cch khai bo trong USS . anh c th ni r hn cho em ddc khng.Bn vng nh th no? bn phi ni ra cha hiu ch no ti s gii p ch nu ti bit ^^! cn khng bit sngm cu cng bn. Bn c vit chng trnh v gi ln ti check cho ^^! cn l thuyt v cc lnh tui a lnc my lnh ri, do ny bn nn cha vit tip c ^^!

09-13-2011, 10:05 PM

cm n anh anhlvddt ti liu anh hng dn rt hay,v rt thc t.

11-13-2011, 05:23 PM

mnh ang lm 1 h thng gm c CPU 224 iu khin bin tn MM420 chy my bm nc. c th s dngUSS k c khng? mnh vn cha hiu lm v phng thc truyn thng USS, cch lp t, i dy in ntn?cc pro gip em vi

11-13-2011, 05:29 PM

Ti sao li khng nh? Phng thc iu khin qua USS n h tr sn cc hm th vin ri, cn g na u, bnc k cc hm th vin, c bi vit trn din n ny ri :). Cn i dy in l dy cp ngun cho PLC,bin tn hay cho ng c :D. Bn phi tm hiu cht cht ch. Khng kh u, c v cm nhn @@



tienkhung_cntd

anhsaodem

tienkhung_cntd

anhlv.ddt

kidsolo1412

nam209

thanhke_auto

kidsolo1412

thanhke_auto

11-13-2011, 05:38 PM

thanks anh anhlv.ddt nhiu. e mn hi v cch kt ni con CPU224 vi MM420 y. khi mnh s dng kt ni Uss l iu khin dc bin tn ri phi khng a. v con CPu 224 k c ng ra Analog. em mi lm nn k c kinh nghiplm. a ch r e vi. thanks a

11-13-2011, 05:41 PM

bn u, qua trung tm c in t Hi Dng hi. Bc y c nhiu thit b lm. D hn ni vo trn ny ^^!

11-13-2011, 05:44 PM

:x hic e tn si gn.

11-13-2011, 05:55 PM

Th ny nh, chun USS thc cht ch s dng 2 dy iu khin thi. v u ni th s dng chn 3 v chn 8trn cng 485 ca PLC ni vi 29 v 30 ca bin tn (ci ny ko nh r lm u c do ny sao y) y l nidy gia PLC v bin tnCn li l bn ci t bin tn v lp trnh cho PLC thi m @@.

11-13-2011, 06:03 PM

thanks anh anhlv.ddt nhiu. e mn hi v cch kt ni con CPU224 vi MM420 y. khi mnh s dng kt ni Uss l iu khin dc bin tn ri phi khng a. v con CPu 224 k c ng ra Analog. em mi lm nn k c kinh nghiplm. a ch r e vi. thanks a l truyn thng th khng cn chn s hay analog g na.V n s dng chun truyn thng 2 dy 485 vi PLCl chn 3 v 8 trn port v trn bin tn l chn P N ty vo loi c th l chn 9 ,10 hoc 14,15 v.v .Vi phngphp ny PLC control bin tn thng qua a ch set trn bin tn.Theo l thuyt th c th control c 32 con ach t 0-31 v ngoi vic iu khin tc ,on/off cn c th truy nhp vo tng tham s trn bin tn

11-14-2011, 09:47 AM

Mnh cng ang xi con 224. Giao tip USS ch dnh ring gia 200-MM th phi1. Ci t thng s trn Inverter: xem manual, c ch no dnh n USS th c bp v2. Ni dy: ni 2 dy nh anh kidsolo1412 ni

PLC l chn 3 v 8 trn port v trn bin tn l chn P N ty vo loi c th l chn 9 ,10 hoc 14,15 v.v 3. Lp trnh PLC: trang 1 ca topic..xongMt lu l nu bn s dng Port0 trn PLC cho USS th khng th giao tip SCADA c.Ngi bun phi mn thm cc Analog Input ri iu khin qua Analog vy :D

11-17-2011, 04:30 PM

l truyn thng th khng cn chn s hay analog g na.V n s dng chun truyn thng 2 dy 485 vi PLCl chn 3 v 8 trn port v trn bin tn l chn P N ty vo loi c th l chn 9 ,10 hoc 14,15 v.v .Vi phngphp ny PLC control bin tn thng qua a ch set trn bin tn.Theo l thuyt th c th control c 32 con ach t 0-31 v ngoi vic iu khin tc ,on/off cn c th truy nhp vo tng tham s trn bin tn

anh ni cho em ci chc nng ca lnh parama vi index ca ch c ghi tham s cho BT h em vi,em c chcnng ca 2 ci kh hiu qu

11-17-2011, 05:04 PM

anh ni cho em ci chc nng ca lnh parama vi index ca ch c ghi tham s cho BT h em vi,em c chcnng ca 2 ci kh hiu quParameter l tham s em cn set trn bin tn.1 Tham s c th c 1 hay nhiu ch s(index)

11-17-2011, 06:56 PM

Parameter l tham s em cn set trn bin tn.1 Tham s c th c 1 hay nhiu ch s(index)ng ri Tham s c th c 1 hay nhiu ch s(index) . ko bit em c cha k hay hiu bit km hay saoy m c cha hiu anh .:D:D



anhlv.ddt

thanhke_auto

anhlv.ddt

kidsolo1412

kidsolo1412

thanhke_auto

thanhke_auto

tienkhung_cntd

11-17-2011, 07:25 PM

ng ri Tham s c th c 1 hay nhiu ch s(index) . ko bit em c cha k hay hiu bit km hay saoy m c cha hiu anh .:D:DL th ny, vi mi tham s P, khi bm ci , n ra vi ci index m, mi index l mt chc nng, ci bng POBmi bit c d hn l dng phn mm ^^!

11-17-2011, 11:04 PM

em hiu th ny nha,khng bit c ng ko na,cc anh xem h emvd: em mun c cc thng s ny ca C t BT nhaP0305 = dng in nh mc ca ng c (Hz). khi em mun c th em s phi dng lnh oc USS_RPM_R vdng in l s thc m v thng s parameter s l VW0 chng hn(v l mnh c th sa ci ny trn mn hnhgim st nh ca anh T lm 1 vd ) mun c tn s th cho VW0 l 0305 ng ko , cn ci index th =nhiu em cha bit.tng t nh tc ca c th :P0311 = tc ng c (RPM) th cng s l USS_RPM_Ry l lnh c thng s ca n em hiu nh vy , cn lnh ghi em ang c tip=))

11-17-2011, 11:13 PM

gn hiu ri , thc ra n d thi, c i :))

11-17-2011, 11:22 PM


Nu tham s no ch c 1 index th index=0V vng nh word khng dng cha s thc c

11-17-2011, 11:25 PM

Nu tham s no ch c 1 index th index=0V vng nh word khng dng cha s thc c

Em mun hiu r hn v xem v d mu th c ch vo tp lnh bn tri ch libraries v bm F1.Siemen vit rtchi tit tt c cc ng dng ca mnh.PS:80% kin thc hin ti anh c vn t help v support

11-17-2011, 11:35 PM

vng em cng c F1 m phi c c EN v V th mi c th lm k nu ch EN ko th kh lmh anh T i ci bi vd ca anh ,bi m anh lm k 2 BT ,em thy c 2 lnh c tham s, 1 ci c R em hiu c ntncn ci c W( ci c W phi thc hin ng th ci c R mi k thc hin) l nh th no vy ca anh l lm cho 2 BT th anh cng c tham s trn 2 BT c k khng hay ch 1 BT 1 lc ( em ko phi ltrong 1 thi im ch c 1 lnh c or ghi lm vic)

11-17-2011, 11:36 PM

gn hiu ri , thc ra n d thi, c i :))em vn ang c y ( ph ph) n bao gi mi k nh anh vi anh T nh :))

12-22-2011, 10:16 AM

sao em s dng th vin uss v lp trnh xong khi nhn bin dch chng trnh thi n bo qu tri li lun, m ttc l cc chtrinh con ca uss. li vy n: Compiling Program Block...



anhlv.ddt

thanhke_auto

kidsolo1412

tienkhung_cntd

thanhke_auto

kidsolo1412

thanhke_auto

12079054

real_bn_9001

Network 3, line 2, ERROR 18: (operand 1) V-Memory not allocated for library. Select right mouse menu item'Library Memory...' from the Program Block in the instruction tree.....Total Errors: 164gip em vi. thanks mi ngi nhiu

12-22-2011, 10:40 AM

Bn mun n lm vic th phi cho n n ch :D. Ci kia i hi bn fai khai bo vng nh phc v cho th vinlnh USS :)

12-22-2011, 11:46 AM

ci ny c khai bo bin nh trong hng dn hay help l c ng khng anh.li ca bn kia c phi l khaibo thiu 1 vng nh no ca USS ng ko .

12-22-2011, 11:56 AM

ci ny c khai bo bin nh trong hng dn hay help l c ng khng anh.li ca bn kia c phi l khaibo thiu 1 vng nh no ca USS ng ko .Vi 1 s chng trnh dng wizard khai bo,em phi khai bo di vng nh V(V-memory) cho khi program blockCch khai bo:chut phi vo Program Block chn Library memory ri chn di vng nh(v ko c s dng linhng vng nh ny trong chng trnh)

12-22-2011, 09:59 PM

c anh no tng lm v ci ny co th cho e xin file v tham kho vi . em lm n tt nghip nn cn phitm hiu k.hi

12-22-2011, 10:28 PM

Vi 1 s chng trnh dng wizard khai bo,em phi khai bo di vng nh V(V-memory) cho khi program blockCch khai bo:chut phi vo Program Block chn Library memory ri chn di vng nh(v ko c s dng linhng vng nh ny trong chng trnh)ci ny khi khai bo wizard em thy cng c bc mnh chn m anh.nh anh ni em lm nh anh m ciLibrary memory th n khng thay i k anh .

PS / tienkhung_cntd (http://plcvietnam.com.vn/member.php?u=8053) ci ny chu kh tm trn d anh Kid clm ri nha.c c k cht s hiu thi.

12-22-2011, 10:35 PM

ci ny khi khai bo wizard em thy cng c bc mnh chn m anh.nh anh ni em lm nh anh m ciLibrary memory th n khng thay i k anh .

PS / tienkhung_cntd (http://plcvietnam.com.vn/member.php?u=8053) ci ny chu kh tm trn d anh Kid clm ri nha.c c k cht s hiu thi.

USS l th vin khng c dng wizard.Em vit xong chng trnh ri hy add s thy add c nh trn

12-22-2011, 11:09 PM

USS l th vin khng c dng wizard.Em vit xong chng trnh ri hy add s thy add c nh trnvng ci USS th ko c wizard cn nh ci HSC chng hn th c.vit xong chng trnh = USS mi ri em s th:D

01-05-2012, 09:33 PM

anh cho em hi , c cch no tryn thng uss gia s7200 vi bin tn G110 khng

04-14-2012, 01:17 AM



thanhke_auto

phanhuunhung

anhlv.ddt

kidsolo1412

thanhke_auto

kidsolo1412

thanhke_auto

kidsolo1412

real_bn_9001

mi ngi cho mnh hi l sau khi mnh ci th vin uss th m step ra bo th ny: "the requested file could belocated" ngha l nh th no vy nh, lu khng dng step, vi li cng khng help c lun.Ai bit gii thch gim mnh vi

04-14-2012, 01:54 AM

mi ngi cho mnh hi l sau khi mnh ci th vin uss th m step ra bo th ny: "the requested file could belocated" ngha l nh th no vy nh, lu khng dng step, vi li cng khng help c lun.Ai bit gii thch gim mnh vica bn y, nu dng win 7 . ti cng b li ko m help c khi ci ci ny ln l m c.http://www.mediafire.com/?url6b0bus511l59

05-18-2012, 09:01 PM

cho cc bn ,mnh l ngi mi tham gia dien n nn mnh c vn bi ton ny mong moi ngi gip .iukhin bin tn siem en vi s7-200 th trong s7 c tch hp sn cc hm cho bin tn siemens.vy cc bn cho mnh hi nu mnh dungs7-200 k bin tn khc th mnh truyn thng nh th no. y mnh dng s7-200 iu khin bt ca danfoss iu p cho h thng bm.c bn no gp trng hp ny cha xin gip mnh vi.

05-18-2012, 09:52 PM

cho cc bn ,mnh l ngi mi tham gia dien n nn mnh c vn bi ton ny mong moi ngi gip .iukhin bin tn siem en vi s7-200 th trong s7 c tch hp sn cc hm cho bin tn siemens.vy cc bn cho mnh hi nu mnh dungs7-200 k bin tn khc th mnh truyn thng nh th no. y mnh dng s7-200 iu khin bt ca danfoss iu p cho h thng bm.c bn no gp trng hp ny cha xin gip mnh vi.khi hm sn dng cho USS, bn c th s dng k s hoc tng t

05-19-2012, 12:06 AM

cho cc bn ,mnh l ngi mi tham gia dien n nn mnh c vn bi ton ny mong moi ngi gip .iukhin bin tn siem en vi s7-200 th trong s7 c tch hp sn cc hm cho bin tn siemens.vy cc bn cho mnh hi nu mnh dungs7-200 k bin tn khc th mnh truyn thng nh th no. y mnh dng s7-200 iu khin bt ca danfoss iu p cho h thng bm.c bn no gp trng hp ny cha xin gip mnh vi.Modbus nu bin tn bn xi c h tr

05-19-2012, 02:34 AM

USS c lm c cho cc loi BT ca cc hng khc khng anh.

05-19-2012, 11:23 AM

USS c lm c cho cc loi BT ca cc hng khc khng anh.Theo nh ti liu th ch h tr dng MM3,4 v dng G ca Siemen

05-19-2012, 11:58 AM

Theo nh ti liu th ch h tr dng MM3,4 v dng G ca Siemenem cha c lm modbus thc t, m nu lm th c cn card h tr ging profibus khng anh. hay l cng ccp truyn ging USS.nu con S7_200 ko giao tip USS c vi cc BT ca hng khc th bun nh. ci hayqu m.

05-19-2012, 12:37 PM

em cha c lm modbus thc t, m nu lm th c cn card h tr ging profibus khng anh. hay l cng ccp truyn ging USS.nu con S7_200 ko giao tip USS c vi cc BT ca hng khc th bun nh. ci hayqu m.Trn 200 th khng cn card g c.Dng chnh port np chng trnh giao tip

05-24-2012, 01:17 AM

mi ngi c th ch gip e cch u ni phn cng M440 v S7-200 CPU224xp, dng uss, ln u lm thc tinb ng khng c kinh nghim.



anhlv.ddt

real_bn_9001

kidsolo1412

real_bn_9001

kidsolo1412

real_bn_9001

kidsolo1412

thanhke_auto

real_bn_9001

thanhke_auto

khanh my

real_bn_9001

05-24-2012, 08:58 AM

mi ngi c th ch gip e cch u ni phn cng M440 v S7-200 CPU224xp, dng uss, ln u lm thc tinb ng khng c kinh nghim.Chn 3 v chn 8 trn port truyn thng ca PLC ni vi cn P v N ca Bin tn, vi MM440 l chn 29 v 30 thphi :)

05-24-2012, 09:37 PM

hj`, cho e hi thm l mnh dng plc iu khin bin tn chi gn c chy 3 cp tc th cn nhng lnh notrong uss . hay l phi dng c 4 lnh, thanks!

05-24-2012, 10:25 PM

Cn USS_INIT v USS_CTRL l chy a cp.RPM v WPM dng c v ghi tham s gia PLC v bin tn

05-25-2012, 12:06 AM

ngha l khi mnh iu khin 3 cp tc th cng nh 4 cp, ch cn 2 lnh USS_INIT v USS_CTRL thi cn e cha hiu v ci phn RPM v WPM dng c v ghi tham s gia PLC v bin tn. ti n nhiu chn qu,

05-25-2012, 12:26 AM

Trong phn USS_CTRL c phn Speed_SP l vng nh dng Real cho php set speed trong di t -200%-200%tn s nh mc.Ch vo cc lnh trong microwin ri nhn F1 th xem

05-25-2012, 12:50 AM

- Speed l tc ng c theo t l phn trm. Phm vi: -200% n 200%.- Speed-SP (speed setpoint): l tc cn t theo t l phn trm. Cc gi tr m s lm ng c quay theo chiu ngc li. Phm vi t: -200% 200%.vy mnh chy 3 cp th cn 3 lnh Speed_SP trong USS_CTRL v chn speed mnh t l tc nh mc

05-25-2012, 01:03 AM

Speed_SP 1 vng nh REAL(Dword) ri dng 3 lnh move,move 3 gi tr khc nhau vo.:-??

05-25-2012, 02:43 AM

Speed_SP 1 vng nh REAL(Dword) ri dng 3 lnh move,move 3 gi tr khc nhau vo.:-??anh i chy vi tc -200-200% th nu mnh t tc max bn BT l chy vi f=50Hz chng hn. nh vy thn chy max l 100% thui ch. ci 200% e cha hiu lm.

05-25-2012, 02:34 PM

c ai c mch step m ch dng plc iu khin bin tn ch bt hay tt ng c khng c l thuyt m c mch xem th tt qu.

05-25-2012, 06:25 PM

c ai c mch step m ch dng plc iu khin bin tn ch bt hay tt ng c khng c l thuyt m c mch xem th tt qu.c my ng vo s ca BT , ngi lm 1 bi vd. kch ng ra ln 1 ngha l BT cho C chy ri,

05-25-2012, 07:45 PM

c ai c mch step m ch dng plc iu khin bin tn ch bt hay tt ng c khng c l thuyt m c mch xem th tt qu.bn tham kho nh, trc tin bn phi tm hiu cc ng ra ng vo ca cc khi USS_INIT v USS_CTRLhttp://www.mediafire.com/?pzmsm8bjk7bbm7p

05-25-2012, 10:12 PM



real_bn_9001

real_bn_9001

anhlv.ddt

real_bn_9001

real_bn_9001

kidsolo1412

real_bn_9001

kidsolo1412

real_bn_9001

real_bn_9001

khanh my

bn tham kho nh, trc tin bn phi tm hiu cc ng ra ng vo ca cc khi USS_INIT v USS_CTRLhttp://www.mediafire.com/?pzmsm8bjk7bbm7pcm n bn rt nhiu. hj`.

05-25-2012, 10:13 PM

c my ng vo s ca BT , ngi lm 1 bi vd. kch ng ra ln 1 ngha l BT cho C chy ri,cm n bn rt nhiu.

05-26-2012, 01:20 AM

mi ngi cho mnh hi c cch no th mch m khng cn bin tn k , ti ang hc nh.

05-26-2012, 08:04 AM

mi ngi cho mnh hi c cch no th mch m khng cn bin tn k , ti ang hc nh.Th th lp trnh PLC trn giy i cn g my tnh bn :D. iu khin bin tn m th khng cn bin tn na ,haizzz

05-26-2012, 12:13 PM

hj`, th ti e g m :d

05-26-2012, 11:16 PM

Speed_SP 1 vng nh REAL(Dword) ri dng 3 lnh move,move 3 gi tr khc nhau vo.:-??A c th ni r hn c khng . ln u tip xc vi uss mong mi ngi gip !

05-27-2012, 12:09 AM

Ch, chn Speed_SP t 1 vng nh v d VD100 ri dng lnh Mov_R ghi gi tr vo VD100 ny,V xem lnhmov chc nng n nh th no,thc hin lnh khi no

05-30-2012, 12:16 AM

http://www.mediafire.com/?ob2mge5b07jsch7Cc anh kim tra gim xem iu khin 3 cp tc bng tay nh th ny c cha

05-30-2012, 12:31 AM

http://www.mediafire.com/?ob2mge5b07jsch7Cc anh kim tra gim xem iu khin 3 cp tc bng tay nh th ny c cha Nhn chung l chy:-B

05-30-2012, 12:58 AM

Nhn chung l chy:-Bd, cn ch t ng v chuyn 2 ch bng tay v t ng th mnh dng chng trnh con c k ?

06-04-2012, 02:54 PM

Mi ngi cho e hi, gi mun iu khin 2 ng c th mnh ch cn thm mt lnh Uss_INIT khai bo cho mta ch bin tn mi phi k

06-04-2012, 03:10 PM

Mi ngi cho e hi, gi mun iu khin 2 ng c th mnh ch cn thm mt lnh Uss_INIT khai bo cho mta ch bin tn mi phi k Bn cha hiu ri USS_INIT ch c khai bo 1 ln qua vng qut u tin, s dng bit SM0.1 y, trn c a chcc bin tn m bn mun iu chnh ri ch Active y, nu bn iu chnh 2 bin tn, c a ch l 0 v 2, v doiu chnh ti a l 32 bin tn (t 0 n 31), nn bn v thanh ghi c 32 a ch ra (tc l 32 ngn ), ribn cn iu chnh bin tn c a ch bao nhiu th c ghi 1 vo cc tng ng , c th, nu iu chnh 2 bintn c a ch nh trn th ghi vo l 2#101 (hoc 16#5), s 1 sau cng l BT s 0, tip n BT s 1 khng



khanh my

real_bn_9001

anhlv.ddt

real_bn_9001

anhlv.ddt

real_bn_9001

anhlv.ddt

real_bn_9001

real_bn_9001

dng nn n l s 0, tip l BT s 2, c dng nn n l s 1. OK chCn khai bo a ch cc bin tn th trong USS_CTRL c chn drive , dng 2 USS_CTRL, 1 ci in 0, cikia in 2

06-04-2012, 03:10 PM

Mi ngi cho e hi, gi mun iu khin 2 ng c th mnh ch cn thm mt lnh Uss_INIT khai bo cho mta ch bin tn mi phi k Bn cha hiu ri USS_INIT ch c khai bo 1 ln qua vng qut u tin, s dng bit SM0.1 y, trn c a chcc bin tn m bn mun iu chnh ri ch Active y, nu bn iu chnh 2 bin tn, c a ch l 0 v 2, v doiu chnh ti a l 32 bin tn (t 0 n 31), nn bn v thanh ghi c 32 a ch ra (tc l 32 ngn ), ribn cn iu chnh bin tn c a ch bao nhiu th c ghi 1 vo cc tng ng , c th, nu iu chnh 2 bintn c a ch nh trn th ghi vo l 2#101 (hoc 16#5), s 1 sau cng l BT s 0, tip n BT s 1 khngdng nn n l s 0, tip l BT s 2, c dng nn n l s 1. OK chCn khai bo a ch cc bin tn th trong USS_CTRL c chn drive , dng 2 USS_CTRL, 1 ci in 0, cikia in 2

06-04-2012, 09:13 PM

Bn cha hiu ri USS_INIT ch c khai bo 1 ln qua vng qut u tin, s dng bit SM0.1 y, trn c a chcc bin tn m bn mun iu chnh ri ch Active y, nu bn iu chnh 2 bin tn, c a ch l 0 v 2, v doiu chnh ti a l 32 bin tn (t 0 n 31), nn bn v thanh ghi c 32 a ch ra (tc l 32 ngn ), ribn cn iu chnh bin tn c a ch bao nhiu th c ghi 1 vo cc tng ng , c th, nu iu chnh 2 bintn c a ch nh trn th ghi vo l 2#101 (hoc 16#5), s 1 sau cng l BT s 0, tip n BT s 1 khngdng nn n l s 0, tip l BT s 2, c dng nn n l s 1. OK chCn khai bo a ch cc bin tn th trong USS_CTRL c chn drive , dng 2 USS_CTRL, 1 ci in 0, cikia in 2cm n bn rt nhiu, bn hng dn rt chi tit. Cn phn cng th mnh ni 2 chn 29 ca bin tn, v 2 chn30 ca bin tn vi nhau. ri cng ni vi chn 3 v chn 8 ca Plc ng khng

06-04-2012, 09:17 PM

cm n bn rt nhiu, bn hng dn rt chi tit. Cn phn cng th mnh ni 2 chn 29 ca bin tn, v 2 chn30 ca bin tn vi nhau. ri cng ni vi chn 3 v chn 8 ca Plc ng khng phn cng th vn ni nh kia, xong cn ni tr chng nhiu vo cui ca mng

06-04-2012, 09:33 PM

phn cng th vn ni nh kia, xong cn ni tr chng nhiu vo cui ca mngA c th ni k hn gip e c k . iu khin mt bin tn th e tm hiu v cng tng i ri, gi e phi iuchnh mng bin tn, em ang th l 2 bin tn . Mong A gip .

06-04-2012, 09:35 PM

n cn tr ghim p cui mng, chng nhiu m, c g u em

06-04-2012, 09:42 PM

d, nu khng c chng nhiu th c nh hng nhiu khng . e ch cn iu khin 2 bin tn chy 4 cp tc thi

06-04-2012, 09:43 PM

nu khng c cha chc chy c bin tn ch ng ni c 4 cp tc em

06-04-2012, 09:56 PM

nu khng c cha chc chy c bin tn ch ng ni c 4 cp tc em ui, vy e phi tm hiu k ci ny ri, ti ln u lm thc t v bin tn nn c rt t kin thc thc t .M ci ch ni dy cp th nh e ni l c cha ,

06-04-2012, 10:19 PM

"Mi bin tn dng 1 khi Uss_Ctrl cn c v ghi tham s vn tun theo nguyn tc ti 1 thi im ch 1 lnh choc ghi c thc hin"A kid ni nh vy ngha l mnh ch iu chnh c 1 bin tn mt thi . c iu khin cng lc c c 2 khng



anhsaodem

nguyendien.89

real_bn_9001

real_bn_9001

anhsaodem

kidsolo1412

real_bn_9001

kidsolo1412

real_bn_9001

real_bn_9001

kidsolo1412

06-04-2012, 10:27 PM

"Mi bin tn dng 1 khi Uss_Ctrl cn c v ghi tham s vn tun theo nguyn tc ti 1 thi im ch 1 lnh choc ghi c thc hin"A kid ni nh vy ngha l mnh ch iu chnh c 1 bin tn mt thi . c iu khin cng lc c c 2 khngD nhin ri bn. USS l truyn thng ni tip m ^^

06-04-2012, 10:36 PM

Mt bin tn th ko cn tr, 2 tr ln th phi lp thm tr.:D

06-04-2012, 10:46 PM

Mt bin tn th ko cn tr, 2 tr ln th phi lp thm tr.:DA c th ch cho e cch u ni ntn k , e nhn trn s nguyn l M440 th thy chn 1 , 2, 3, 4 ni bin trthi, e khng nhn ra ch ni tr chng nhiu.

06-04-2012, 10:55 PM

"Mi bin tn dng 1 khi Uss_Ctrl cn c v ghi tham s vn tun theo nguyn tc ti 1 thi im ch 1 lnh choc ghi c thc hin"Mi ngi cho e hi, vy mnh iu khin 2 bin tn chy 3 cp tc th phi dng thm c 2 lnh :cUsS_RPM_X v lnh ghi USS_WPM_x na . Mi ngi gip e vi

06-04-2012, 10:56 PM

A c th ch cho e cch u ni ntn k , e nhn trn s nguyn l M440 th thy chn 1 , 2, 3, 4 ni bin trthi, e khng nhn ra ch ni tr chng nhiu.c, ni tr ngay trn cng truyn thng uss m, c phi ni vo u vo DIN u, bn tm ci s ni , trongdin n c th phi ^^

06-04-2012, 10:58 PM

A c th ch cho e cch u ni ntn k , e nhn trn s nguyn l M440 th thy chn 1 , 2, 3, 4 ni bin trthi, e khng nhn ra ch ni tr chng nhiu.http://nn6.upanh.com/b6.s27.d2/5552d36377877e84fd94b3bb511d4145_45703926.sodocabl e.jpg

06-04-2012, 11:12 PM

"Mi bin tn dng 1 khi Uss_Ctrl cn c v ghi tham s vn tun theo nguyn tc ti 1 thi im ch 1 lnh choc ghi c thc hin"Mi ngi cho e hi, vy mnh iu khin 2 bin tn chy 3 cp tc th phi dng thm c 2 lnh :cUsS_RPM_X v lnh ghi USS_WPM_x na . Mi ngi gip e vi E cm n mi ngi. Gi lp trnh th e cha bit vn ny, mong mi ngi gip e

06-04-2012, 11:28 PM

E cm n mi ngi. Gi lp trnh th e cha bit vn ny, mong mi ngi gip e Thay i tc th cn gi dng Read vi Write tham s,dng thng CTRL

06-05-2012, 12:13 AM

Thay i tc th cn gi dng Read vi Write tham s,dng thng CTRLe cm n A v mi ngi rt nhiu !

06-05-2012, 09:09 AM

E lp trnh, v hng lm ca e l so vi iu khin 1 bin tn th iu khin 2 bin tn phi thm 2 u vo iu khin cho cc chn EN, v RUN ca 2 lnh CTRL, khng bit e lm nh vy c c k

06-05-2012, 12:16 PM



thuoc_tru_sau

real_bn_9001

khanh my

real_bn_9001

thanhke_auto

real_bn_9001

khanh my

thanhke_auto

E lp trnh, v hng lm ca e l so vi iu khin 1 bin tn th iu khin 2 bin tn phi thm 2 u vo iu khin cho cc chn EN, v RUN ca 2 lnh CTRL, khng bit e lm nh vy c c k Em kha cho CTRL lm g.CTRL c th dng nhiu khi cng lc

06-05-2012, 05:58 PM

"Mi bin tn dng 1 khi Uss_Ctrl cn c v ghi tham s vn tun theo nguyn tc ti 1 thi im ch 1 lnh choc ghi c thc hin"A kid ni nh vy ngha l mnh ch iu chnh c 1 bin tn mt thi . c iu khin cng lc c c 2 khng

plc hot theo chu k vng qut t trn xung m. trn qut khi motor 1. di qut khi motor x no .

06-05-2012, 09:46 PM

Em kha cho CTRL lm g.CTRL c th dng nhiu khi cng lcd, e lm 2 khi CTRL v mi khi c mt a ch bin tn ring. v t 2 a ch bin tn ring ( ci ttrong bin tn, lnh a ch 2011 cho tng ci). Nhng e k bit cch kch hot cho tng khi CTRL , c th l lcno kch hot bin tn 1, lc no bintn 2 . A c th ch bo gip e khng . E cm n A

06-05-2012, 09:51 PM

d, e lm 2 khi CTRL v mi khi c mt a ch bin tn ring. v t 2 a ch bin tn ring ( ci ttrong bin tn, lnh a ch 2011 cho tng ci). Nhng e k bit cch kch hot cho tng khi CTRL , c th l lcno kch hot bin tn 1, lc no bintn 2 . A c th ch bo gip e khng . E cm n ABn ni ci cng ngh iu khin bin tn nh th no t A ti Z lun i, ch ni nh th ny lu lm

06-05-2012, 10:04 PM

Bn ni ci cng ngh iu khin bin tn nh th no t A ti Z lun i, ch ni nh th ny lu lmvng, dng 1 plc iu khin 2 bin tn chy 4 cp tc bng uss . mt bin tn th e sau khi c mi ngitrong din n hng dn e lm c ri. Gi l iu khin 2 bt . Mong mi ngi gip .

06-05-2012, 10:08 PM

d, e lm 2 khi CTRL v mi khi c mt a ch bin tn ring. v t 2 a ch bin tn ring ( ci ttrong bin tn, lnh a ch 2011 cho tng ci). Nhng e k bit cch kch hot cho tng khi CTRL , c th l lcno kch hot bin tn 1, lc no bintn 2 . A c th ch bo gip e khng . E cm n Aci lc no kch hot BT1 lc no BT2, lc no 2 ci cng chy,.... nh vy l do thut ton iu khin cabn,cn trong khi CTRL c ci bit RUN . =0 th n dng C, =1 th n chy.bt help nhn ch mu en nha[/URL][URL="http://img405.imageshack.us/img405/5353/aaaahn.jpg"]http://img405.imageshack.us/img405/5353/aaaahn.jpg(http://imageshack.us/photo/my-images/405/aaaahn.jpg/) Uploaded with ImageShack.us (http://imageshack.us)

06-05-2012, 10:13 PM

ci lc no kch hot BT1 lc no BT2, lc no 2 ci cng chy,.... nh vy l do thut ton iu khin cabn,cn trong khi CTRL c ci bit RUN . =0 th n dng C, =1 th n chy. e l trong 2 khi CTRL e khng bit cch iu chnh cho ci no chy trc, chy sau, hay cng lc .

06-05-2012, 10:24 PM

e l trong 2 khi CTRL e khng bit cch iu chnh cho ci no chy trc, chy sau, hay cng lc .Ci ny th yu cu bi ton ca bn phi cho ch, khng th bn c to ra chun cho ring mnh i, mnh thybn lm bi 1 BT vy l OK ri, gi m rng ra 2 thui, khng c g kh c

06-05-2012, 10:58 PM

e l trong 2 khi CTRL e khng bit cch iu chnh cho ci no chy trc, chy sau, hay cng lc .n gin bn c coi l 2 ci bng n trong nh vi ngoi cng nh bn i, lc ti mi cn m n, trong nhth m n trong nha, ra sn ngi t k th bt in ngoi sn, 2 ci bin tn cng th thui. cn ci ny tui chac lm thc t bao gi. v ko c , bn c tht th ti mong bn c gng test ngon n i. sau tic.chc thnh cng !



anhsaodem

real_bn_9001

anhsaodem

thanhke_auto

real_bn_9001

real_bn_9001

real_bn_9001

kidsolo1412

real_bn_9001

06-05-2012, 11:20 PM

e l trong 2 khi CTRL e khng bit cch iu chnh cho ci no chy trc, chy sau, hay cng lc .bn ny bun ci nh, bn k ci bin tn no th k vo chn RUN ca khi USS_CTROL m, k c bn btc 2 chn RUN ca 2 bin tn n s chy c 2, c lm sao u ^^

06-05-2012, 11:34 PM

n gin bn c coi l 2 ci bng n trong nh vi ngoi cng nh bn i, lc ti mi cn m n, trong nhth m n trong nha, ra sn ngi t k th bt in ngoi sn, 2 ci bin tn cng th thui. cn ci ny tui chac lm thc t bao gi. v ko c , bn c tht th ti mong bn c gng test ngon n i. sau tic.chc thnh cng !

Ci ny th yu cu bi ton ca bn phi cho ch, khng th bn c to ra chun cho ring mnh i, mnh thybn lm bi 1 BT vy l OK ri, gi m rng ra 2 thui, khng c g kh c e cng tng t th . e v d n gin nh: trong khi lp trnh th plc c th iu khin 2 bin tn, m lcu e ch mun cho con bin tn 1( c a ch l 0) chy v bin tn 2 khng chy. th e phi lm ntn

06-05-2012, 11:37 PM

sc bn gn vo chn run ca USS_CTROL 1 bit i0.0 v USS_CTROL 2 bit I0.1 v d th, nu mun ci 1 chy thcho i0.0 = 1 , ci i0.1 vn = 0 th ci 2 khng chy, c th thi m

06-05-2012, 11:52 PM

tt c u do thut ton ca tng ngi. tui ngh cu nn lm nhiu cht s c k 1 ci t duy LOGIC tt hn. khic 2 ci =1 th cng ty bn s dng loi tip im g.ch c phi c =1 l chy u.P/S : khng nn nng qu nha. d ha vi qu m ,

06-05-2012, 11:59 PM

tt c u do thut ton ca tng ngi. tui ngh cu nn lm nhiu cht s c k 1 ci t duy LOGIC tt hn. khic 2 ci =1 th cng ty bn s dng loi tip im g.ch c phi c =1 l chy u.P/S : khng nn nng qu nha. d ha vi qu m ,. cm n mi ngi gip .

06-06-2012, 12:11 AM

bn ny bun ci nh, bn k ci bin tn no th k vo chn RUN ca khi USS_CTROL m, k c bn btc 2 chn RUN ca 2 bin tn n s chy c 2, c lm sao u ^^

sc bn gn vo chn run ca USS_CTROL 1 bit i0.0 v USS_CTROL 2 bit I0.1 v d th, nu mun ci 1 chy thcho i0.0 = 1 , ci i0.1 vn = 0 th ci 2 khng chy, c th thi mui, cm n bn. Chc 2 bi vit gi cng lc nn mnh cha thy bi ca bn. Mnh hiu ri. Ngi qu.

06-07-2012, 10:18 AM

http://www.mediafire.com/?tsgunlrboebjjepCc Anh, ch xem gip e xem em lp trnh nhng phn c bn ny c cha . iu khin 2 BT 4 cp tc cch bng tay v t ng

06-07-2012, 02:22 PM

http://www.mediafire.com/?tsgunlrboebjjepCc Anh, ch xem gip e xem em lp trnh nhng phn c bn ny c cha . iu khin 2 BT 4 cp tc cch bng tay v t ng2 khi CTRL nn xi vng nh ring bit khng nn xi chung vng nh nh th ny,nht l nhng vng nh botrng thi ca khi CTRL

06-08-2012, 01:28 AM

2 khi CTRL nn xi vng nh ring bit khng nn xi chung vng nh nh th ny,nht l nhng vng nh botrng thi ca khi CTRLhj`. thanks A, vy l chc nhng phn c bn tng i n ri A nh. C b sai ch no na k .



real_bn_9001

thanhke_auto

real_bn_9001

real_bn_9001

kidsolo1412

real_bn_9001

chi.tam92

kidsolo1412

real_bn_9001

hongminhbv

06-12-2012, 02:09 AM

em cm n mi ngi trong din n tn tnh ch bo, hng dn trong qu trnh e lm quen vi uss.Gi th bi tp ca e cng lm c tng i ri . Chc din n ngy cng pht trin !

06-12-2012, 10:21 AM

http://www.mediafire.com/?tsgunlrboebjjepCc Anh, ch xem gip e xem em lp trnh nhng phn c bn ny c cha . iu khin 2 BT 4 cp tc cch bng tay v t ngcheck li link nha, ko vo c bn i.

06-12-2012, 01:57 PM

Mch em check trn bin tn. nhng mi ngi cho e hi k bit sao c mt ci bin tn ch chy ti a c50Hz . khng bit mun cho chy 100hz th phi chnh sa lnh hay ci t ch no .

06-24-2012, 01:09 PM

Mi ngi cho e hi l gi phi thay 1 bin tn t M440 sang M420 th ngoi vic thay i chn type trongUSS_CTRL = 0 th cn phi thay i g na khng . Tc l gi e iu khin 1 con 440 v 1 con 420. Mong mingi ch bo

06-24-2012, 10:03 PM

Mi ngi cho e hi l gi phi thay 1 bin tn t M440 sang M420 th ngoi vic thay i chn type trongUSS_CTRL = 0 th cn phi thay i g na khng . Tc l gi e iu khin 1 con 440 v 1 con 420. Mong mingi ch bo Type vn bng 1 c k li help.MM4 tc l MM420 hay MM440 set tng t

06-24-2012, 10:16 PM

Type vn bng 1 c k li help.MM4 tc l MM420 hay MM440 set tng td, th mnh ch cn thay i ci t trong bin tn thi

06-24-2012, 10:22 PM

Mch em check trn bin tn. nhng mi ngi cho e hi k bit sao c mt ci bin tn ch chy ti a c50Hz . khng bit mun cho chy 100hz th phi chnh sa lnh hay ci t ch no .

niu mun cho bin tn ca bn chy 100hz th con bin tn ca bn c p ng ni khng xe chy c 50 dn my ln chy 100 >>>>> xi khi

06-24-2012, 10:22 PM

Set li tng t con c.Nh a ch bin tn,tc truyn thng......

06-27-2012, 10:59 PM

Em cm n mi ngi trong in n tn tnh ch bo, gip em trong qu trnh lm quen v lp trnh Uss. em nghi din n mnh vo phn "ti liu tham kho". hi vng phn no th hin c lng cm n mingiChc din n ngy cng pht trin ! Mt ln na em gi li cm n chn thnh nht ti mi ngi !

06-28-2012, 07:00 AM

niu mun cho bin tn ca bn chy 100hz th con bin tn ca bn c p ng ni khng xe chy c 50 dn my ln chy 100 >>>>> xi khiBin tn c th cho mnh ci t cht t 0 Hz ti 400 Hz okBn ch cn ci t li thng s tn s Max trong bin tn l OK ( Xem Manual ca bin tn )Tuy nhim t tn s 60 Hz tr ln tc ng c gn nh khng thay i l my ( ng c thng thng Max =60 Hz )- Khi bn ci max ln 400 Hz chng hn th tn hiu A hoc V iu khin s l ( 4 - 20 mA hoc o - 10V ) = 0 - Hzmax



hongminhbv

duc.thao

hoanglonghui

duc.thao

hoanglonghui

duc.thao

hoanglonghui

thangkho89

thangkho89

06-28-2012, 07:01 AM

niu mun cho bin tn ca bn chy 100hz th con bin tn ca bn c p ng ni khng xe chy c 50 dn my ln chy 100 >>>>> xi khiBin tn c th cho mnh ci t cht t 0 Hz ti 400 Hz okBn ch cn ci t li thng s tn s Max trong bin tn l OK ( Xem Manual ca bin tn )Tuy nhim t tn s 60 Hz tr ln tc ng c gn nh khng thay i l my ( ng c thng thng Max =60 Hz )- Khi bn ci max ln 400 Hz chng hn th tn hiu A hoc V iu khin s l ( 4 - 20 mA hoc o - 10V ) = 0 - Hzmax

09-13-2012, 10:46 AM

hi .cho cc anh .em mi lm c vi cc hm USS INT , USS CTRL , USS RPM cn hm USS WPM th em chahiu cch ghi gi tr vo bin tn ra lm sao .Nh em tm hiu th ngha cc chn n l th ny :param l thng s cn ghi value l gi tr cn ghi DB PRT l b m lu trng thi done l bit xc nhn vic ghi hon tt......My anh c th hng dn cho em cch s dng hm USS-WPM c khng . Thanks cc a nhiu !

09-13-2012, 10:52 AM

hi .cho cc anh .em mi lm c vi cc hm USS INT , USS CTRL , USS RPM cn hm USS WPM th em chahiu cch ghi gi tr vo bin tn ra lm sao .Nh em tm hiu th ngha cc chn n l th ny :param l thng s cn ghi value l gi tr cn ghi DB PRT l b m lu trng thi done l bit xc nhn vic ghi hon tt......My anh c th hng dn cho em cch s dng hm USS-WPM c khng . Thanks cc a nhiu !bn a chut vo hm USS-WPM nhn F1c v d lun

09-13-2012, 11:53 AM

hi .mnh lm c ri .cm n bn nh .nhng cho mnh hi thm 1 phn na . l vi mi 1 thng s cn ghi thmnh phi dng 1 hm USS WPM ng ko nh .c cch no ch dng 1 hm USS WPM m c th truy nhp vo ttc cc thng s ca bin tn ko ?

09-13-2012, 12:03 PM

hi .mnh lm c ri .cm n bn nh .nhng cho mnh hi thm 1 phn na . l vi mi 1 thng s cn ghi thmnh phi dng 1 hm USS WPM ng ko nh .c cch no ch dng 1 hm USS WPM m c th truy nhp vo ttc cc thng s ca bin tn ko ?mnh cha s dng bao gi nhng theo mnh th bn s dng lnh movekhi cn dng thng s no th move thng s vo hm uss wpm l ok ,Right ^^

09-13-2012, 12:21 PM

Ok .Thanks bn nhiu nh !

09-13-2012, 12:42 PM

Ok .Thanks bn nhiu nh !cm n th nhn nt thanks nha bn

09-13-2012, 11:43 PM

duc.thao co phai Thao K53 dai hoc mo dia chat ko nhi?

09-16-2012, 12:32 AM

tho online th gi cho anh bn word vo mail nh. [email protected]/s: anh c y! hj



cuongdk

anhlv.ddt

hiepvp84

hiepvp84

hiepvp84

hiepvp84

anhlv.ddt

anhlv.ddt

10-11-2012, 11:29 AM

Mnh ang tm ti liu v uss, c bi cc anh cc bn lm mnh bit ra nhiu, thank all

10-11-2012, 11:31 AM

click nt thank nh :)

10-11-2012, 03:01 PM

Mnh cng lm ci ny mi m khng c. c theo hng dn ca cc bn, c trong phn help m khng hiu- Ci t bin tn ng nh hng dn - Khi khai bo lnh Uss_Init mnh ch hiu cc chn Mode, Baud, EN. Cn cc chn Active, Done, Error mnh chahiu ngha (c mi ko hiu). ti sai l 16#1 m khng l 12, 13, ....- Khi khai bo lnh Uss_Ctrl mnh cng ch hiu ngha cc chn EN, Run, Type, Spedd-SP, cc chn cn li mnhkhng hiuMong cc bn ch gio.

10-11-2012, 03:06 PM

Bn no c v d c th v USS khng gi cho mnh 1 file nhMnh ch cn 1 v d hiu v cch khai bo cc lnh USS thi, cha ni g n cng ngh c thTks

10-11-2012, 03:12 PM

Mnh ang lm nhng c mt s ch b vng, th my ln khng c- Ci t bin tn ng nh hng dn- Khi khai bo lnh Uss_Init mnh ch hiu cc chn Mode, Baud, EN. Cn cc chn Active, Done, Error mnh chahiu ngha (c mi ko hiu). ti sai l 16#1 m khng l 12, 13, ....- Khi khai bo lnh Uss_Ctrl mnh cng ch hiu ngha cc chn EN, Run, Type, Spedd-SP, cc chn cn li mnhkhng hiuMong bn ch gio thmTks !

10-11-2012, 03:14 PM

Mnh th c m khng hiuTi t trc n nay mnh ton dng u vo s (DIN) iu khin ch cha k qua cng truyn thngBn c hiu n u ri, ch gip mnihf vi

10-11-2012, 03:17 PM

Bn no c v d c th v USS khng gi cho mnh 1 file nhMnh ch cn 1 v d hiu v cch khai bo cc lnh USS thi, cha ni g n cng ngh c thTks

Trong help ca phn mm ni rt r v v d ny m, dk c bn ch cn dng USS_INIT v USS_CTROL l?

10-11-2012, 03:23 PM

Mnh ang lm nhng c mt s ch b vng, th my ln khng c- Ci t bin tn ng nh hng dn- Khi khai bo lnh Uss_Init mnh ch hiu cc chn Mode, Baud, EN. Cn cc chn Active, Done, Error mnh chahiu ngha (c mi ko hiu). ti sai l 16#1 m khng l 12, 13, ....- Khi khai bo lnh Uss_Ctrl mnh cng ch hiu ngha cc chn EN, Run, Type, Spedd-SP, cc chn cn li mnhkhng hiuMong bn ch gio thmTks !Tr li bn th nht:ti sao li l 16#1. v d a ra l k a ch bin tn l 1. cng c th l 16#12, 16#13... nu bin tn ca bnc a ch tng ng l 12 hoc 13. v n n 16#30 nh, cn a ch ny quyt nh khi bn ci bin tn gi trP093

ACTIVE indicates which drives are active. Some drives only support addresses 0 through 30. See the diagrambelow for the description and format of the active drive input. Any drive that is marked as Active is automatically



hiepvp84

anhlv.ddt

anhlv.ddt

polled in the background to control the drive, collect status, and prevent serial link time-outs in the drive. Thetime between the status polls to the drive can be calculated using the Drive Scan Times table in theDrive_Communications_Time topic. Refer to Drive Setup topic for information about how to configure the seriallink timeout parameter (P093). chng chu c help g 2 l bn cha c k phn ti vit trang 1 ri :). hng dn v ni c th m :)

10-12-2012, 11:25 AM


Ch mi cha thy bc no tr li emTht s em cng c cng riEm c c hng dn ting Vit, c c mc help trong ting Anh, nhng khng hiu v ngha v cch s dngcc chn trong lnh USS. Nu c v d c th th d hiu hnMong cc bc gip . Em ang rt cn !

10-12-2012, 11:36 AM


Th ci ny l ci g? bn hi c ngi tr li cn ku khng l sao? bn mun ci g na. Ni th ny l qu r vlnh iu khin cn g na?

10-12-2012, 11:37 AM

chu kh c k v suy ngh, ni n th ri, cn chy c ng c th ch cn USS_INIT v USS_CTROL l



hiepvp84

muoitd

kidsolo1412

hiepvp84

ri? bn ch cn vit chng trnh gm 2 lnh ny, trong main l , chng l li phi vit c proj cho bn, n snth sao ???

10-12-2012, 12:08 PM

Tr li bn th nht:ti sao li l 16#1. v d a ra l k a ch bin tn l 1. cng c th l 16#12, 16#13... nu bin tn ca bnc a ch tng ng l 12 hoc 13. v n n 16#30 nh, cn a ch ny quyt nh khi bn ci bin tn gi trP093

chng chu c help g 2 l bn cha c k phn ti vit trang 1 ri :). hng dn v ni c th m :)

He. Bc HD ? hm no v em tm gp bc hi thm. Em Gia LcEm hi thm bc nhChn Done ch cn khai bo vng nh l xong, hay l s dng n click ci khcChn Error , Speed, Inhibit, Fault ... cng ch cn khai bo 1 vng nh bt k bc? hay l s dng vng nh lm g ?Hay l ch cn khai bo cc chn Run, Dir, Stop, ... chy, dng l Ok bc nh?Em g qu !

10-12-2012, 12:40 PM

sao c on #7 ny em khng thy hiu g c, kh hiu tht. Chc c l l phn nng cao ca PLC nn khnghiu c.


10-12-2012, 01:01 PM

Khng hiu vo help c bn gc ting anh xem c khi d hiu hn.

10-16-2012, 04:18 PM



chi.tam92

hiepvp84

kidsolo1412

visuly

anhlv.ddt

hiepvp84

kidsolo1412

vthang.mta

Active:s a ch bin tn c kch hot s dng

Cm n bn. Mnh lm c ri. Truyn thng th ok, bin tn chy.Ln trc l do mnh khai bo a ch khng ng nn n ko chy. hi, mnh cn vng na. Trong USS Ctrl c 2 chn Off2 v Off3. Theo l thuyt th Off2 l dng chm, Off3 dng nhanh (mnh hiu th ko bit ng ko). Nhng khi thc hin chng trnh, mnh cho tn hiu Off2 th bin tn dng ri (khi m Off3 cha On)Mnh c v cch ci tham s cho Off2, hnh nh l P1217 hay 1216, nhng lm mi vn th, c gp Off2 lSTOP lunBn gip mnh vi.

10-16-2012, 05:21 PM

, mnh cn vng na. Trong USS Ctrl c 2 chn Off2 v Off3. Theo l thuyt th Off2 l dng chm, Off3 dng nhanh (mnh hiu th ko bit ng ko). Nhng khi thc hin chng trnh, mnh cho tn hiu Off2 th bin tn dng ri (khi m Off3 cha On)Mnh c v cch ci tham s cho Off2, hnh nh l P1217 hay 1216, nhng lm mi vn th, c gp Off2 lSTOP lunmnh ngi ng ri pan off2 dng chm theo thi gian gim tc mnh ci trn bin tn cn off3 dng ngay. khng pit c ng khng ah kidsolo1412

10-17-2012, 02:31 PM

mnh ngi ng ri pan off2 dng chm theo thi gian gim tc mnh ci trn bin tn cn off3 dng ngay. khng pit c ng khng ah kidsolo1412

Khng bc no tr li gip em vn ny ?

10-19-2012, 03:39 AM

Khng bc no tr li gip em vn ny ?

OFF2 mode is coast to standstill,for example, you can use OFF2 for emergency stop.OFF3 quick ramp-down, you need to set the OFF3 rampup time and OFF3 ramp down time accordingly.

10-19-2012, 06:37 AM

bn i ! bn lm chy trn s7200 ri ch mnh vi mnh lm hoi m vn khng chy c

10-19-2012, 06:42 AM

ci ny phi ci t c bin tn, lp trnh PLC v kt ni 2 thng ny vi nhau. bn lm khng chy c th phich ra cho mi ngi bit bn lm nh th no m khng chy c ch???

10-19-2012, 07:30 AM

OFF2 mode is coast to standstill,for example, you can use OFF2 for emergency stop.OFF3 quick ramp-down, you need to set the OFF3 rampup time and OFF3 ramp down time accordingly.Oao? bn gii ting Anh nh. Mnh c trong phn help ca Step7 thy n vit l " OFF2 to coast standstill, OFF3 toquick stop" , vy ngha l OFF2 gim tc, OFF3 mi dng ch nh. C th ci thi gian gim tc c trongbin tn khng bn? Mnh c manual ca bin tn MM4 thy c tham s P1121, nhng khng c, c OFF2 ctn hiu l STOP lun.

10-19-2012, 08:20 AM

Oao? bn gii ting Anh nh. Mnh c trong phn help ca Step7 thy n vit l " OFF2 to coast standstill, OFF3 toquick stop" , vy ngha l OFF2 gim tc, OFF3 mi dng ch nh. C th ci thi gian gim tc c trongbin tn khng bn? Mnh c manual ca bin tn MM4 thy c tham s P1121, nhng khng c, c OFF2 ctn hiu l STOP lun.

Ci ny l support Siemen tr li.

10-21-2012, 01:42 AM



kidsolo1412

vthang.mta

kidsolo1412

dinhsonvgs

kidsolo1412

trietgiangvo

kidsolo1412

Cho cc bn! Mnh ag lm 1 d n kt ni PC - PLC s7200 cpu 224 - Bin tn Siemen MM420Yu cu: t PC lp trnh giao din bng VB ri iu khin xung PLC, t PLC gi lnh ci t v iu khin v ct bin tn v, ri x l ti PLC --> hin th ln PC. C ch mnh cha hiu r:- l truyn thng t PC --> PLC l qua OPC ng truyn 485; t PLC --> bin tn cng qua bus 485 nhng tbin tn qua PLC theo USS protocol. Mnh mun hi l khi truyn t PC --> PLC c nh hng nhiu n bin tnk? v khi t PLC --> bin tn qua USS c nhiu ln my tnh ko? ko th cho 2 ng truyn ring v PLC c 1cng 485. Mong cc bn hng dn. Chn thnh cm n!

10-21-2012, 04:14 AM

Cho cc bn! Mnh ag lm 1 d n kt ni PC - PLC s7200 cpu 224 - Bin tn Siemen MM420Yu cu: t PC lp trnh giao din bng VB ri iu khin xung PLC, t PLC gi lnh ci t v iu khin v ct bin tn v, ri x l ti PLC --> hin th ln PC. C ch mnh cha hiu r:- l truyn thng t PC --> PLC l qua OPC ng truyn 485; t PLC --> bin tn cng qua bus 485 nhng tbin tn qua PLC theo USS protocol. Mnh mun hi l khi truyn t PC --> PLC c nh hng nhiu n bin tnk? v khi t PLC --> bin tn qua USS c nhiu ln my tnh ko? ko th cho 2 ng truyn ring v PLC c 1cng 485. Mong cc bn hng dn. Chn thnh cm n! dng port ca PLC cho USS protocol th c ngha port bn cu hnh cho n thnh USS protocol,vi giaothc ny th khng dng connect VB c na.Ch c cch dng PLC 2 port hoc lm kiu thay phin nhau

10-21-2012, 04:48 AM

Cm n bn Kidsolo.- Th mnh mua thm module truyn thng cho PLC c k?- PLC 2 port truyn thng c th l nhng con no? bn lm bao gi cha, c th cho mnh tham kho k?- V thay phin nhau l th no? mnh cha hiu lm?

10-21-2012, 05:41 AM

Cm n bn Kidsolo.- Th mnh mua thm module truyn thng cho PLC c k?- PLC 2 port truyn thng c th l nhng con no? bn lm bao gi cha, c th cho mnh tham kho k?- V thay phin nhau l th no? mnh cha hiu lm?S7-200 dng 226 hoc 224XP s c h tr 2 port.Ti lm USS kt hp HMI gim st ch khng dng VB nh bn2 loi PLC trn mua mi khong gn 10 chai.Nu bn cn hng secondhand LH mnh

01-19-2013, 12:18 AM

ai c th vin uss giao tip gia s7 200 vi bin tn m440

01-19-2013, 02:19 AM

ai c th vin uss giao tip gia s7 200 vi bin tn m440www.tudonghoahcm.netMc ti liu v phn mm chuyn ngnh t ng ha=>th vin uss v modbusPS:Phi ci SP7 hoc 9 cho step c y th vin

01-28-2013, 11:10 PM

Mi ngi cho mnh hi t nha.Khi iu khin bin tn bng PLC S7-200. Nu mt in t ngt, v khi c in tr li th bin tn bo li F0005.Xin hi lp trnh trong chng trnh S7-200 th phi vit th no x l trng hp ny?

01-29-2013, 12:04 AM

Bn iu khin bin tn kiu g?y l hng dn trong manual bn check li xem x lF0005 _Inverter overloaded _Duty cycle too demanding



kidsolo1412

trietgiangvo

tieppro_1990

kidsolo1412

phongtdhk4

thientu

_Motor power (P0307) exceeds inverter power capability (P0206)

Check the following: 1.Load duty cycle must lie within specified limits2.Motor power (P0307) must match inverter

01-29-2013, 12:07 AM

Bn iu khin bin tn kiu g?y l hng dn trong manual bn check li xem x lF0005 _Inverter overloaded _Duty cycle too demanding _Motor power (P0307) exceeds inverter power capability (P0206)

Check the following: 1.Load duty cycle must lie within specified limits2.Motor power (P0307) must match inverter

01-29-2013, 09:45 PM

Mnh iu khin bng USS. V chng trnh PLC: http://www.mediafire.com/download.php?3p3ibcckhjxtcdtNh anh em xem v hng dn gip.Thanks!

03-16-2013, 02:02 PM

Cho em hi nu giao tip vi PLC S7300 th dng hm th vin no

03-16-2013, 08:31 PM

Cho em hi nu giao tip vi PLC S7300 th dng hm th vin no

300 th cu hnh ngay trong hardware,v bin tn phi c m rng port profibusTham kho ti y:http://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&lang=en&objid=22078757&caller=view

05-11-2013, 02:12 AM

mnh mun iu khin bin tn theo lnh ghi ( tc , o chiu , nhp th .....) . truy nhp vo khung tin can . anh no lm cha ch cho mnh vi Thanks all of you!

05-29-2013, 08:40 PM

cm n nhng chia s y b ch ca anh. thanks anh nhiu

Ci t bin tn:Vi MM440 bn set cc thng s theo trnh t sau:- Reset ci t li cho h thng (tu chn):P0010 = 30P0970 = 1Nu b qua bc ny, cc thng s tip theo s c set theo cc gi tr:USS PZD length: P2012 Index0 = 2USS PKW length: P2013 Index0 = 127- Cho php truy nhp c/ghi cc thng s:P0003 = 3- Kim tra ci dt thng s ng c cho bin tn:P0304 = in p ng c (V)P0305 = dng in ng c (A)P0307 = cng sut ng c (W)P0310 = tn s ng c (Hz)P0311 = tc ng c (RPM)Cc thng s ci t ny c th thay i tu thuc vo loi ng c c s dng.Trc khi ci t cc thng s P0304, P0305, P0307, P0310, P0311, cn thit phi set thng s P0010 ln 1 trc.Sau khi kt thc vic ci t, t thng s P0010 v 0. Cc thng s P0304, P0305, P0307, P0310, P0311 ch cth thay i trong ch quick commissioning.- nh ch iu khin t xa hay ti ch (Local / Remove):



P0700 Index0 = 5- t la chn tn s setpoint cho USS cng COMP1000 Index0 = 5- nh thi gian tng tc (tu chn), l thi gian ng c tng tc n tc max:P1120 = 0 650,00 (s).- nh thi gian gim tc (tu chn), l thi gian ng c gim dn tc cho n khi dng:P1121 = 0 650,00 (s).- t tn s tham chiu:P2000 = 1 n 650 Hz- Tiu chun ho USS:P2009 Index0 = 0- t gi tr tc baud cho chun RS-485:P2010 Index0 = 4 (2400 baud)P2010 Index0 = 5 (4800 baud)P2010 Index0 = 6 (9600 baud)P2010 Index0 = 7 (19200 baud)P2010 Index0 = 8 (38400 baud)P2010 Index0 = 9 (57600 baud)P2010 Index0 = 10 (115200 baud)- Nhp a ch bin tn:P2011 Index0 = 0 n 31- t thi gian trng gia hai bc in, y l khong thi gian cho php gia hai ln truy nhp d liu bc in.N c s dng ct bin tn trong khong thi gian xy ra li truyn thng. Thi gian ny tnh t lc sau khimt d liu hp l ca bc in c nhn. Nu c mt d liu khng c nhn, bin tn s ngt v hin th mli F0070. t gi tr 0 ngng iu khin.P2014 Index0 = 0 n 65,535 ms- Chuyn d liu t RAM n EEPROM:P0971 = 1 (bt u chuyn).Lu ci t s thay i cc thng s vo EEPROM.Nh vy bn c th iu khin ng c chy, dng, o chiu thng qua USSP/S; Gi em cng ng mai i lm, ti mai vit tip v lnh c v ghi ^^!

Powered by vBulletin Version 4.2.0 Copyright 2013 vBulletin Solutions, Inc. All rights reserved.

Documents

Truyen thong giua S7-200 và bien tan qua mạng USS 1