TURBO LINERThe Faster Tougher Better Spray-in Bedliner

Dealer Booklet

T

Why Polyrea? ................................................................ 2

Selling Turbo Liner Polyurea Bedliners ............... 3

Miscellaneous Sales Information .......................... 4

Low Pressure Systems ............................................... 5

High Pressure Systems ............................................. 6

Additional Information ............................................. 7

Setup Options ........................................................8-10

Equipment Information .................................. 11-20

Setup Requirements and Purchasing Options .......................................... 21-27

Credit Application ....................................................29

Exhibit A: Warranty ..................................................30

Exhibit B: Warranty Claims ....................................31

Personal Guarantee .................................................32

Table of Contents

1

Why Turbo Liner?

FASTER

TOUGHER

BETTER

2

Why Polyurea?

to 2 hours.

Polyurea Technology

POLYURETHANE

OCN NCO HO OHR

IsocyonatePrepolymer

Polyol

CatalystR

R

N

H

N

H

O O

POLYURETHANE

OCN NCO H2N NH2RIsocyonatePrepolymer

PolyamineR

R

R

R

R R

N

H H H

N

H

N N

3

Selling Turbo Liner Polyurea Bedliners

ADVANTAGES OVER POP-IN LINERS

canopies etc.

4

Miscellaneous Sales Information

VARIOUS APPLICATIONS

can coat it

car parts.

5

Low Pressure Systems

STATIC MIX LOW PRESSURE

100% SOLIDS

in order to dry.

texture.

High Pressure vs Low Pressure

High PressureLow Pressure

Bed Floor Bed Floor

BATCH MIX LOW PRESSURE

SOLVENT BASED

end up with 1.5 Gallons of dried product.

6

High Pressure Systems

There are 3 types of product polyurea, polyurethane and polyurethane hybrids.

moister and humidity.

belief that your customer wants the best product possible.

heat high pressure systems.

some low pressure systems are sprayed through a drywall hopper.

wait time for the installation and be able to use their bedliner sooner. Some low pressure system bedliners can not be used for 3-4 days to enable them to dry.

Impingement Mix High Pressure

Heat brings A & B material to

without this will lead to striations in the coating

7

Additional Information

SALES NOTE

cannot be used again.

INSTALLER NOTE

Better equipment=better product

DEALER COST OF MATERIAL

8

Setup Options

9

Shop Layout for Stationary System

Good lighting is very important.

* The inside of the spray area is

The walls are painted white to help

* The drop curtain is also made with 6 mil. clear plastic.

PUMP

25'

CURTAIN WALL

20'

8'

EXHAUST FANABOUT 3000 C.F.M.

10'

CURTAIN WALL

10

Trailer Layout for Mobile System

FOLD DOWN DOOR

EXHAUSTFAN

AIR COMPRESSORWORK/TOOL BENCH

DOOR

MH M

AC

HIN

EM

ATE

RIA

L

GENERATOR

HOSE

11

Equipment Information

Air, Electric and Hydraulic Systems No matter what the application, Graco has the solution

Which system is right for you?

33

AW2222

AR6060(03)

AR7070(04)

AR8686(05)

AR5252(02)

AR4242(01)

AR2929(00)

E-10

E-20

H-25

H-40

H-50

A-25

E-30

PRES

SURE

PSI

(Bar

)

2000(138)

1500(103)

1000(69)

500(34)

FLOW lbs/min (kg/min)

0 5(2.3)

15(6.8)

20(9.1)

25(11.3)

30(13.6)

35(15.9)

45(20.4)

40(18.1)

55(25.9)

50(22.7)

10(4.5)

E-10

E-20

A-25

H-25

E-30

H-50

H-40

SPRAY FOAM EQUIPMENT

PRES

SURE

PSI

(Bar

)

3500(241)

3000(207)

2500(172)

2000(138)

1500(103)

1000(69)

500(34)

E-XP1

E-XP2

H-XP2

H-XP3

E-10hp(230V)

AR2020(000)

AR4242(01)

AR5252(02)

AR2929(00)

AR6060(03)

E-XP1E-10hp/230V E-XP2

H-XP2

H-XP3

FLOW gpm (lpm)

0 0.5(1.9)

1.5(5.7)

1.0(3.8)

2.0(7.6)

2.5(9.5)

3.0(11.3)

COATINGS EQUIPMENT

PERFORMANCE CHARTSUse these charts to help identify the system that will work most efficiently with each mix chamber. Flow rates are based on a material viscosity of 60 cps. See examples below.

HOW TO USE THESE GRAPHS• Select spray pressure• Select mix chamber or flow rate• Choose proportioner model Note: Darker shading includes proportioner models shown in lighter shaded areas.

FOAM EXAMPLEMix chamber: AR6060 (03)Pressure: 1250 psiFlow rate: 22 lb/min*Reactors H-25, E-30, H-40, H-50

COATING EXAMPLEMix chamber: AR2929 (00)Pressure: 1500 psiFlow rate: 0.9 gpm*Reactors E-XP1, E-XP2,H-XP2, H-XP3, E-10hp (230V)

* Output of flat tip will be slightly less than round equivalent.

AIR-DRIVEN• Entry-level system• Low-output applications• Easy to use• Minimal system feedback

for operator

HYDRAULIC• Top of the line system for high-production

professionals• Highest value for the greatest performance• High-output applications• Ideal for in-plant OEMs• Provides superior, uninterrupted performance• Provides operator with material

data and system diagnostics for total control

ELECTRIC• The most popular system• High value for great performance• Mid- to high-output applications• Provides operator with material data

and system diagnostics for total control

Reactor ® A-25Reactors H-25, H-40, H-50, H-XP2, H-XP3

Reactors E-8p, E-10, E-10hp, E-20, E-30, E-XP1, E-XP2, E-30i, E-XP2i

136

Reactor A-25: Superior performance with long-lasting durability

DataTrak ™ Control

Three Heat Zones

to handle different chemical viscosities

ISO Pump Lube System

on the pump seal and shaft

Quick Knockdown Lower Pumps

Hybrid Heater

NXT ® Air Motor

for increased efficiency

operating noise levels

and rapid changeover

Recirculation Manifold

Electric EquipmentPreferred choice for medium- to high-output foam or coatings applications

5

Reactor E-Series: High performance at an outstanding value

Equipped with material data and system diagnostics, Reactor E-Series proportioners provide total control. Advanced features provide longer equipment life, more uptime for your spray day and overall Graco reliability. From entry-level models to high-output systems, there’s a Reactor system that’s ideal for your specific application.

Discover the benefits of Reactor• Advanced control technology tracks, monitors

and saves project data

• Graco InSite™ Remote Reporting Technology

(with Elite models)

• Troubleshooting made easy with on-screen

QR code shortcuts

• Compact design saves room in your spray rig

• Reactor 2 models include E-30, E-XP2

and E-30i, E-XP2i

• Easy to use, easy to learn – reduces training time and increases productivity

• Circulation valves with longer lasting seals

• Longer lasting modular heater control boards that minimize downtime

• Heat transformers that don’t require tap settings

• Models include E-8p, E-10, E-10hp, E-20 and E-XP1

PROVEN RELIABILITY

Reactor E-20 and E-XP1With proven reliability in the field, the Reactor E-20 and E-XP1 systems are designed to apply foam, polyurea and other materials that require accurate temperatures and pressures necessary for superior coating results.

• Easy to use

• Accurate heating with precise temperature sensing

• Portable, wheeled cart lets you get closer to the job

For Reactor 2 details,

see brochure 348986.

Hydraulic EqiupmentTop of the line equipment for high-production professionals

8

Reactor H-Series: Superior power and performance

Graco’s line of hydraulic Reactors brings increased yield and performance to high-output spraying. Hydraulic systems are the choice of spraying professionals who want to reap the benefits of the latest spraying technologies and add productivity to boost their bottom line.

• Adjustable pressure imbalance for tighter or looser ratio error detection

• Flexibility to change A or B pumps for fixed ratio application other than 1:1

• Models include: H-25, H-40, H-50, H-XP2, H-XP3 and H-VR

Ordering Information

Gun and hose sold separately256886 Reactor H-VR, 230-volt, 3-ph256887 Reactor H-VR, 400-volt, 3-ph

VARIABLE RATIO DISPENSING

Digital Heat and Pressure Controls

• Allow you to precisely program temperatures and pressures, and monitor machine performance

Circulation Valves

• Reduce isocyanate crystallization while offering more controlled pressure balancing

Hose Control

• Reliable and accurate hose connection system. Flexible fluid temperature sensor allows you to monitor and control temperature closer to the gun.

Heat Platform

• Circuit board is divided into easy-to-replace modules that simplify

troubleshooting and maintenance, maximizing spray time

Powerful Hybrid Heaters

• Heat material quickly and maintain temperature set points – even when

spraying at maximum flow rates

Troubleshooting Y-Strainer

• Analog temperature and pressure gauges are standard

Horizontal Pumps

• Positive displacement pumps are easy to service and provide smoother changeover

for maintaining best spray pattern

ISO Pump Lube System

• Prevents isocyanate crystallization on the pump seal and shaft

Reactor H-VR – Variable Ratio Hydraulic ProportionerThe Reactor H-VR is a variable ratio proportioner that combines proven Graco hydraulic Reactor technology with variable ratio capabilities.

• For applications that require a range or difference in volumetric ratio• Infinitely adjustable volume ratio from 1:1 to 2.5:1• Dispenses polyurethane foams and polyurea coatings• Rated for 3500 psi max working pressure• 15,300 watt heaters

8

10

Graco Equipment for Foam and CoatingsTechnical Specifications and Ordering Information

Air-Driven Electric (E Series) Hydraulic (H Series)

MODEL A-25 E-8p E-10 E-20 Reactor 2 E-30 H-25

Max Working Pressure

2000 psi (138 bar, 13.8 MPa)28 scfm air consumption@100 psi

2000 psi (140 bar, 14 MPa)

2000 psi (138 bar, 13.8 MPa)

2000 psi (138 bar, 13.8 MPa)

2000 psi (138 bar, 13.8 MPa)

2000 psi (138 bar, 13.8 MPa)

Min Working Pressure

N/A NA N/A N/A N/A 850 psi (59 bar, 5.9 MPa)

Max Hose Length 210 ft (64 m) 105 ft (32 m) 105 ft (32 m) 210 ft (64 m) 310 ft (94 m) 310 ft (94 m)

Max Fluid Temp 190˚F (88˚C) NA 160˚F (71˚C) 190˚F (88˚C) 190˚F (88˚C) 190˚F (88˚C)

Output 25 lb (11.4 kg)/min .00352 gpm (0.0133 lpm)

12 lb (5.4 kg)/min 20 lb (9 kg)/min 30 lb (13.6 kg)/min 22 lb (10 kg)/min

Weight 250 lb (113 kg) 95 lb (43 kg) Heated: 160 lb (72 kg)Unheated: 150 lb (68 kg)

342 lb (155 kg) 355 lb (161 kg) 8 kW: 535 lb (243 kg)15 kW: 562 lb (255 kg)

Ordering Information

With 6.0 kW heater:

40A–230V, 1-ph262614 (Bare)AP2614 (AP Pkg) CS2614 (CS Pkg) P22614 (P2 Pkg)

32A–230V, 3-ph262614 (Bare)AP2614 (AP Pkg) CS2614 (CS Pkg) P22614 (P2 Pkg)

18.5A–380V, 3-ph (4-wire)262614 (Bare)AP2614 (AP Pkg) CS2614 (CS Pkg) P22614 (P2 Pkg

Foam:

120V259082 (Bare)AP9082 (AP Pkg)CS9082 (CS Pkg)P29082 (P2 Pkg)

Flooring:

120V259082 (Bare)24R151 (Pkg)

230V259083 (Bare)24R154 (Pkg)

With 1.7 kW heater:

120V, 2-cord249570 (Bare)AP9570 (AP Pkg) CS9570 (CS Pkg)

With 2.0 kW heater:240V, 2-cord249571 (Bare)AP9571 (AP Pkg) CS9571 (CS Pkg)

240V, 1-cord249572 (Bare)AP9572 (AP Pkg) CS9572 (CS Pkg)

Unheated ambient system:

120V249576 (Bare)249806 (Pkg)

240V249577 (Bare)249808 (Pkg)

With 6.0 kW heater:

48A–230V, 1-ph259025 (Bare)AP9025 (AP Pkg) CS9025 (CS Pkg) P29025 (P2 Pkg)

32A–230V, 3-ph259034 (Bare)AP9034 (AP Pkg) CS9034 (CS Pkg) P29034 (P2 Pkg)

24A-400V, 3-ph259030 (Bare)AP9030 (AP Pkg) CS9030 (CS Pkg) P29030 (P2 Pkg)

Elite With 10.2 kW heater: 272110 (Bare) AP2110 (AP Pkg) CS2110 (CS Pkg) P22110 (P2 Pkg)

With 15.3 kW heater:272111 (Bare) AP2111 (AP Pkg) CS2111 (CS Pkg) P22111 (P2 Pkg)

Standard With 10.2 kW heater:272010 (Bare) AP2010 (AP Pkg) CS2010 (CS Pkg) P22010 (P2 Pkg)

With 15.3 kW heater:259057 (Bare) AP9057 (AP Pkg) CS9057 (CS Pkg) P29057 (P2 Pkg)

*Amps: 10 kW:230V 1-ph — 78230V 3-ph — 50400V 3-ph — 34

15 kW:230V 1-ph — 100230V 3-ph — 62400V 3-ph — 35

With 8.0 kW heater:

69A–230V, 1-ph 255400 (Bare)AP5400 (AP Pkg) CS5400 (CS Pkg) P25400 (P2 Pkg)

46A–230V, 3-ph255401 (Bare)AP5401 (AP Pkg) CS5401 (CS Pkg) P25401 (P2 Pkg)

35A–400V, 3-ph255402 (Bare)AP5402 (AP Pkg) CS5402 (CS Pkg) P25402 (P2 Pkg)

With 15.3 kW heater:100A–230V, 1-ph255406 (Bare)AP5406 (AP Pkg) CS5406 (CS Pkg) P25406 (P2 Pkg)

59A–230V, 3-ph255407 (Bare)AP5407 (AP Pkg) CS5407 (CS Pkg) P25407 (P2 Pkg)

35A–400V, 3-ph255408 (Bare)AP5408 (AP Pkg) CS5408 (CS Pkg) P25408 (P2 Pkg)

Operation manual 3A1569 3A1602 311075 312065 333023 312062

Repair manual 3A1570 3A1602 311075 312066 333024 312063

SPRAY FOAM EQUIPMENT

Packages include spray hose, whip hose and gun. *Reactor 2 systems can be wired for all voltages: 230V-1ph; 230V-3ph; 400V-3ph

11

Electric (E Series) Hydraulic (H Series)

H-40 H-50 E-10hp E-XP1 Reactor 2 E-XP2 H-XP2 H-XP3

2000 psi (138 bar, 13.8 MPa)

1700 psi (117 bar, 11.7 MPa) 1-ph

2000 psi (138 bar, 13.8 MPa) 3-ph

3000 psi (206 bar, 20.6 MPa)

2500 psi (172 bar, 17.2 MPa)

3500 psi (240 bar, 24.0 MPa)

3500 psi (240 bar, 24.0 MPa)

1-ph: 3200 psi(221 bar, 22.1 MPa) 3-ph: 3500 psi (240 bar, 24.0 MPa)

600 psi (41 bar, 4.1 MPa)

600 psi (41 bar, 4.1 MPa)

NA N/A N/A 1200 psi (83 bar, 8.3 MPa)

850 psi (59 bar, 5.9 MPa)

410 ft (125 m) 410 ft (125 m) 105 ft (32 m) 210 ft (64 m) 310 ft (94 m) 310 ft (94 m) 410 ft (125 m)

190˚F (88˚C) 190˚F (88˚C) 170°F (77°C) 190˚F (88˚C) 190˚F (88˚C) 190˚F (88˚C) 190˚F (88˚C)

45 lb (20 kg)/min 52 lb (23.6 kg)/min 1 gpm (3.8 lpm) 1.0 gpm (3.8 lpm) 2.0 gpm (7.6 lpm) 1.5 gpm (5.7 lpm) 2.8 gpm (10.6 lpm)

597 lb (271 kg) 597 lb (271 kg) 239 lb (108 kg) 342 lb (155 kg) 350 lb (159 kg) 562 lb (255 kg) 597 lb (271 kg)

With 12.0 kW heater:

100A–230V, 1-ph 253400 (Bare)AP3400 (AP Pkg) P23400 (P2 Pkg)

With 15.3 kW heater:71A–230V, 3-ph253401 (Bare)AP3401 (AP Pkg) P23401 (P2 Pkg)

41A–400V, 3-ph253402 (Bare)AP3402 (AP Pkg) P23402 (P2 Pkg)

With 20.4 kW heater:95A–230V, 3-ph 253407 (Bare)AP3407 (AP Pkg) P23407 (P2 Pkg)

52A–400V, 3-ph253408 (Bare)AP3408 (AP Pkg) P23408 (P2 Pkg)

With 12.0 kW heater:

100A–230V, 1-ph 253725 (Bare)AP3725 (AP Pkg) P23725 (P2 Pkg)

With 15.3 kW heater:71A–230V, 3-ph253726 (Bare)AP3726 (AP Pkg) P23726 (P2 Pkg)

41A–400V, 3-ph253727 (Bare)AP3727 (AP Pkg) P23727 (P2 Pkg)

With 20.4 kW heater:95A–230V, 3-ph 256505 (Bare)AP6505 (AP Pkg) P26505 (P2 Pkg)

52A–400V, 3-ph256506 (Bare)AP6506 (AP Pkg) P26506 (P2 Pkg)

120V24T100 (Bare)APT100 (AP Pkg)P2T100 (P2 Pkg)

230V24T900 (Bare)APT900 (AP Pkg)P2T900 (P2 Pkg)

With 10.2 kW heater:

69A–230V, 1-ph259024 (Bare)AP9024 (AP Pkg) P29024 (P2 Pkg)

43A–230V 3-ph259033 (Bare)AP9033 (AP Pkg) P29033 (P2 Pkg)

24A–400V, 3-ph259029 (Bare)AP9029 (AP Pkg) P29029 (P2 Pkg)

Elite With 15.3 kW heater: 272112 (Bare)AP2112 (AP Pkg) P22112 (P2 Pkg

Standard With 15.3 kW heater:272012 (Bare)AP2012 (AP Pkg) P22012 (P2 Pkg)

*Amps:230V 1-ph — 100230V 3-ph — 62400V 3-ph — 35

With 15.3 kW heater:

100A–230V, 1-ph255403 (Bare)AP5403 (AP Pkg) P25403 (P2 Pkg)

59A–230V, 3-ph255404 (Bare)AP5404 (AP Pkg) P25404 (P2 Pkg)

35A–400V, 3-ph255405 (Bare)AP5405 (AP Pkg) P25405 (P2 Pkg)

With 12.0 kW heater:

100A–230V, 1-ph253403 (Bare)AP3403 (AP Pkg) P23403 (P2 Pkg)

With 20.4 kW heater:95A–230V, 3-ph 253404 (Bare)AP3404 (AP Pkg) P23404 (P2 Pkg)

52A–400V, 3-ph253405 (Bare)AP3405 (AP Pkg) P23405 (P2 Pkg)

312062 312062 332144 312065 333023 312062 312062

312063 312063 332144 312066 333024 312063 312063

COATINGS EQUIPMENT

*Reactor 2 systems can be wired for all voltages: 230V-1ph; 230V-3ph; 400V-3phPackages include spray hose, whip hose and gun.

18

Air-Purge Guns

Fusion AP – Easy to use, easy to maintain

of materials – choose from hardened stainless steel or PolyCarballoy options

swelling or damage

Quick-Release Fluid Housing

Easily change mix chambers without tools

Hand-Tightened Front Cap

Clean and maintain seals and mix chamber without tools

Durable Side Seals

Rugged stainless steel or PolyCarballoy construction for longer life

Cyclone-Mix™Chamber

Hardened stainless steel construction for longer life

Check Valves with Screens

Cartridge design for easy maintenance

Ergonomic Handle

improves operator comfort and reduces fatigue

Plural-component spraying made easy

19

Air-Purge GunsPlural-component spraying made easy

PROBLER® P2 – Compact and ergonomic

portion and dry side of the gun.

300 pounds (136 kg) of triggering force

Grease Fitting

For quick daily maintenance

Two-Piece Mix Chamber

Powerful Dual Air Piston

pull-back pressure

Ergonomic Handle and Balanced Design

Comfortable, compact and lightweight

P2 ELITE

alternate hose routing configurations

filters without removing side blocks

accessories

20

Graco Plural-Component Spray Guns

14

Liquid-Purge Air-Purge

MODEL FUSION CS FUSION AP P2 GAP PRO

Materials sprayed Foam and coatings Foam and coatings Foam and coatings Foam and coatings

Maximum Output 25 lb/min (11.3 kg/min) 50 lb/min (22.7 kg/min) 40 lb/min (18 kg/min) 40 lb/min (18 kg/min)

Minimum Output < 1 lb/min (

21

Setup Requirements

and Purchasing Options

22

The general schedule of events for new dealer set up is as follows;

1. We run a credit application and set you up in our system.

4. A down payment of ½ of the spray system is made to Turboliner.

7. The Turboliner product is ordered and shipped to you from our manufacturing plant.

9. The new dealer will notify us when they get there shop set up or estimate when it will be ready.

safe operation of the spray system with your spray tech and support people. The remaining ½ of the system payment will be collected when your set up is complete.

23

REACTOR A-25 AIR DRIVEN

$20,500.00

REACTOR E-20 ELECTRIC DRIVEN

$24,500.00

REACTOR E-30 ELECTRIC DRIVEN

$29,500.00

E-XP1 ELECTRIC DRIVEN

$26,000.00

E-XP2 ELECTRIC DRIVEN

$3 , 00.00

H-XP2 HYDRAULIC DRIVEN

$33,900.00

H-XP3 HYDRAULIC DRIVEN

220 - 3-PHASE

$41,000.00

All of our systems come standard with Probler P2. The Graco fusion gun can be substituted in its place. Also included are a 50 ft. main hose and a 10 ft. whip. Other items included, see complete equipment and parts breakdown on page 26.

24

Net Profit Per Truck - Mid Sized Crew Cab W. 3.5-4.5’ Bed Over Rail Liner

NET PROFIT -$145.03 $109.95 $874.88 $2,149.75 $3,424.63 $4,699.50

Net Profit Per Truck - Full Sized Short Bed Under Rail Liner

NET PROFIT -$134.60 $130.80 $927.00 $2,254.00 $3,581.00 $5,000.00

Net Profit Per Truck - Full Sized Long Bed Over Rail Liner

NET PROFIT -$110.75 $178.50 $1,046.25 $2,492.50 $3,938.75 $5,385.00

25

$7,249.25 $9,799.00 $12,348.75 $18,723.13 $25,097.50

$7,562.00 $10,216.00 $12,870.00 $19,505.00 $26,140.00

$8,277.50 $11,170.00 $14,062.50 $21,293.75 $28,525.00

As you can see for most companies who

systems come with all the items you will

you choose to train at our facility you are responsible for Hotel and Airfare for your

at a dealers site there are distractions for the trainee and this does cause problems for the trainee. If he is not focused on the training session he may miss something that

a problem later if he has a problem. If we

the equipment. How to use it and how to

running good. So the training location is up to you the new dealer.

26

Complete Equipment and Parts Breakdown

MASKING SUPPLIES

$14.35 1- 18” MASKING PAPER $48.40 1- SHARK SKIN MASKING PLASTIC$199.00 1- BOX STRING TAPE****** SEE NOTES BELOW$28.47 3- ROLL DUCT TAPE$9.95 1- ROLL 2” TAPE $3.50 4- ROLLS 3/4” TAPE $55.00 1- MASKING MACHINE$222.00 1- D.A. SANDER $60.13 1- ROLL SANDPAPER $40.48 8- MAGNETS

MACHINE

1- MACHINE PACKAGE$250.00 2- SUPPLY HOSE KIT$1972.00 2- TRANSFER PUMPS$950.00 1- AIR MIXER FOR B SIDE 2- T-TYPE FLUID FILTERS$66.15 1- DESSICANT AIR DRYER FOR A SIDE DRUM$5.00 1- PROBLER GUN VIDEO

CHEMICALS

$2715.00 1- SET OF MATERIAL$15.14 1- QUART DPM$15.20 1- QUART NMP$20.00 1- QUART RS-98 GUN SOLVENT 1- QUART DOP (ONLY ON USED MACHINES)

SAFETY EQUIPMENT

$928.00 1- FRESH AIR SYSTEM$22.36 1- BOX SURGICAL GLOVES$79.80 1- PAINTERS SUIT$186.93 1- FULL FACED RESPIRATOR$25.50 1- HALF FACE RESPIRATOR$24.41 1- PAINT DUST MASKS 10 PACK

MISC. SUPPLIES

$2.00 2- TEFLON TAPE$5.00 1- HOW TO SPRAY A BEDLINER DVD$5.00 1- TRAINING MANUAL$4.00 1- AIR FITTING$5.50 1- WHITE LYTH GREASE 4oz TUBE$1.50 1- SHEET 1000 GRIT SANDPAPER$34.00 1- GUN CLEANING KIT$25.00 1- MISC FITTINGS PICKED UP LOCALLY$20.00 1- MINI GREASE GUN$5.00 1- HOW TO SPRAY DVD

POINT OF SALE INFORMATION

$15.00 30-40 BED LOGOS$80.00 1- BANNER$25.00 50- BROCHURES$8.00 2- BROCHURE HOLDERS$5.00 1 DEMO DVD

2- CRESCENT WRENCH (8” & 10”)2 - SET OF QUALITY ALLEN WRENCHES MET/STRD.1 - SET STANDARD WRENCHES1- 18” PIPE WRENCH1- O-RING PICK SET1- DRUM DOLLY OR HAND CART1- DRUM FUNNEL1- AUTO BODY SHOP CHEESE GRATOR1- RAZOR KNIFE1- STAPLER TACKER1- BUNG WRENCH1- BOX RAZOR BLADES1- SQUIRT BOTTLE2- 5 GALLON BUCKETS W/LIDS1- AIR SPRAY NOZZLE2- FOLDING BODY SHOP DOOR STAND OR �4- SAW HORSES

1- METAL CAKE PAD W/LID1- SMALL 110V WALL OR SPACE HEATER1- BAG COTTON RAGS1- EXTRA 6MIL CLEAR PLASTIC2- GALLON ACETONE1- PAM COOKING SPRAY1- GALLON RS-98 (1 QT. INCLUDES W/SYSTEM)

Note:Highlighted items have been shipped.

*** This item must be purchased direct from the vendor WireTrim see note inside the box of tape we shipped to you or goto www.wiretrim.com. It is also recommended that you order the fi ber or string version of their tape. This should be done as soon as our shipment shows up at your facility.

SUGGESTED TOOLS AND SUPPLIES NOT INCLUDED

27

credit card or other means. We will run one or both and you will be contacted with the results. If there

owe.

APPLICATION FOR CREDIT, TERMS OF SALE AND LIMITATION OF WARRANTY & LIABILITY

APPLICANT IS: Sole proprietorship ___ Partnership ___ Corporation ___ Limited Liability Company ___

Company Name __________________________________________________ Year Established ______________________________________ Mailing Name of Owners Address ________________________________________________ or Officers ___________________________________________ShippingAddress ________________________________________________ EIN Tax #____________________________________________ City,

State & Zip______________________________________________ Phone (_______) ______________________________________

FIRMS FROM WHICH YOU BUY ON OPEN ACCOUNT

COMPANY ADDRESS CITY, STATE & ZIP TELEPHONE AMOUNT OWED

FINANCIAL INSTITUTION ADDRESS CITY, STATE & ZIP TELEPHONE ACCOUNT NO.

Applicant certifies that the above information is true and correct. Applicant understands that Turbo Liner, Inc.’s ("TLI") terms of sale are 2/10, net 30 days with a 1.825% per month (21.9% per year) finance charge added to any past due balance. All sales will be made FOB TLI site unless otherwise noted. All transactions will be construed according to and governed by the laws of the state of Idaho.

Applicant requests credit up to $____________. Applicant understands that it may need to supply additional financial information to TLI and agrees to do so if requested and hereby authorizes TLI to obtain further information concerning Applicant and Applicant's credit standing, including, but not limited to, a credit report and/or contact with the companies and financial institutions listed above. Also, if any change occurs that materially reduces the means or ability of Applicant to pay all amounts due, Applicant will immediately notify TLI of such condition.

Applicant understands that all purchases from TLI shall be governed by the following, which shall be considered an integral part and condition of each purchase from TLI.

EXCEPT AS WARRANTED BY THE MANUFACTURER OF THE PRODUCTS PURCHASED, THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, CONCERNING THE PRODUCTS OR THEIR SUITABILITY, FITNESS FOR PURPOSE, OR OTHERWISE AND IN ANY EVENT, ANY RECOVERY FOR BREACH OF ANY WARRANTY OR CONTRACT OR NEGLIGENCE WITH RESPECT TO GOODS PURCHASED BY APPLICANT IS LIMITED TO REPAIR OR THE REPLACEMENT OF SUCH GOODS, AT TLI'S OPTION, AND NO RECOVERY MAY BE OBTAINED BY APPLICANT FROM TLI FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT LIMITED TO, LOST PROFITS.

By signing below, the Applicant acknowledges that the limitations and disclaimers herein described are conditions of sale may only be altered by a writing signed by TLI and then only to the extent that said writing is contradictory to this document. This Agreement expresses the entire agreement between the parties as to the subject matters contained herein.

TURBO LINER, INC. APPLICANT:__________________________________

By__________________________________________ By__________________________________________ Title_________________________________________ Title_________________________________________ Date: _______________________________________ Date: ________________________________________

30

--

-

or other misuse. All warranty claims must be made in accordance with Exhibit B hereto.

prorated from date of shipment.

THE FOREGOING WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUD-ING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

-trol.

31

-

-

-

number will be issued and must be placed on all returned shipping containers and Turbo Liner will -

-

32

Personal Guarantee

-

-

prior to or as a condition of the performance of this Guaranty.

liability hereunder.

-

___________________________

___________________________

TURBO LINER

Tougher then Polyurethane bedliners.

TURBO LINER

www.turboliner.com

HOT SPRAY IS THE ONLY WAY!