Upload
rikjah
View
75
Download
7
Embed Size (px)
DESCRIPTION
CELL Maker
Citation preview
1 / 13
THE USER GUIDE TO
MAPINFO PLUS-IN CELLMAKER
Made by: Haifeng Zhao
Network Planning and Simulation Department
CDMA Division
ZTE CORPORATION
2 / 13
1 Effect Drawing The following is the site information effect drawing based on MapInfo
made by the CellMaker
3 / 13
2 How to use it 2.1 Preparation
First we need to make a site information file, and the format is as the following.
Then copy all the site information to a *.txt format file as the following:
4 / 13
After the preparation is done, double clicks on the shortcut of CellMaker, and it will automatically open MapInfo. And now we can see that the plus-in tool is already on the main menu of MapInfo as the name of Cellmaker.
5 / 13
2.2 Create site information
File---->open
Choosing the Delimited ASCII(*.txt) file format, and open the site file
6 / 13
After open the site file, choosing the Use First Line for Column in the pop-up Delimited ASCII Information window, the press OK
7 / 13
Table---->Create Points
In the pop-up window for Create Points, click on Projection button
In the Choose Projection window, choosing the correct projection
mode, e.g. WGS84, press OK
8 / 13
File---->Close All
CellMaker---->Draw Sector Symbols
9 / 13
Choosing the .TAB site information file, which is converted from the .Txt file, and in the pop-up Sector Builder window select Sectorders, then press OK
10 / 13
The CellMaker can maximally support 6 sectors sites, but generally the sectors for each BTS site are not more than 3, so we are mainly focusing on the sector A, B and C , and for the Sector designator, we choose them from V1 to V3(sometimes it will be configured automatically )
11 / 13
For the sectors color, we can edit it according to our use manner.
Effect drawing of site information based on MapInfo
12 / 13
Display the site ID.
13 / 13