8/14/2019 Ver. E 100607

1/30

Ver. E 100607

8/14/2019 Ver. E 100607

2/30

Prepared & Presented By:

FiberNext, LLC3 Robinson Rd., Suite A3, Bow, NH 03304

Ph: 603-226-2400 - www.fibernext.com

Fiber Optics 201A training guide for installing

fiber optic cabling systems in accordance withANSI/EIA/TIA & IEEE standards

8/14/2019 Ver. E 100607

3/30

Tier 2 Testing:

The OTDR

8/14/2019 Ver. E 100607

4/30

OTDR Testing

OTDR (Optical Time Domain Reflectometer) technology is designedto provide a single ended test of any cable. Utilizing sophisticated

algorithms, the equipment is able to calculate exact length andapproximate loss of events along the cable span.

GN Netttest

CMA4000

OTDR

8/14/2019 Ver. E 100607

5/30

1. Generates a baseline trace:A visual of the link.

2. Can identify and evaluate

specific events in the link.

3. Cable acceptance tool.4. Fault location tool.

5. Excellent documentationcapabilities.

6. Limited use in short length

networks.

8/14/2019 Ver. E 100607

6/30

Fault-Locate (Using anOTDR)

Work Area

TelecomOutlet

Equipment Room

HorizontalCross-connect

Telecom Room

NetworkEquipment

MainCross-connect

PC

OTDR

MM

LaunchCable

8/14/2019 Ver. E 100607

7/30

Assorted Troubleshooting Tools

Talk Set

VFI

OTDR

8/14/2019 Ver. E 100607

8/30

OTDR Types

Most common OTDRs use a console design allowing the

user to upgrade or swap between MM and SM modules.These offer similar analytical features to the lab quality

OTDRs, but are more rugged and field portable. Files can be

saved to various media and later downloaded to a PC.

Fluke

OptiFiber

Wavetek MTS5100

8/14/2019 Ver. E 100607

9/30

OTDR Types

More common console OTDRs. Files can be saved to

various media and later downloaded to a PC.

Exfo

FTB-150

Anritsu CMA5000

8/14/2019 Ver. E 100607

10/30

OTDR Types

Micro-OTDRs are the next generation of fast, economical

test sets for field use. These models offer fewer features thanthe larger console design and are currently not upgradeable.

Many manufacturers are focusing on development of these

types of OTDRs for size and weight reasons.

Noyes M100

OTDR

Noyes M200

OTDR

Noyes OFL200

OTDR

8/14/2019 Ver. E 100607

11/30

ControlUnit

Laser Transmitter

Detector

LCD Display

SplitterFiber under Test

OTDR Functionality

Basic OTDR function

OTDR

Connector

8/14/2019 Ver. E 100607

12/30

Physical cable plantas displayed on

OTDR screen

OTDR Trace Analysis

Network under test

Loss

8/14/2019 Ver. E 100607

13/30

LaunchCablesLaunch cables vary from simple reel (or ring style) through larger

lunch box style suitcases. Most modern OTDRs dont require alaunch suppression longer than 250-500, but many older modelsneeded delay lines of 1000 or more.

8/14/2019 Ver. E 100607

14/30

Using an OTDRw/ Launch CableUse of a launch cable assures the user that the front end connector of

the network will be accurately measured. If the launch cable is tooshort, the front end connector will be consumed in the deadzone.Likewise, a receive cable assures the technician that the far end

connector is not broken and the span has continuity.

Launch Cable

Receive

Cable

Cable under test

OTDR LaunchPort event

End

Event

Noise

Floor

8/14/2019 Ver. E 100607

15/30

OTDR Trace Analysis

Connect the OTDR to a launch (suppression/reference)

cable. The secondary end of the launch cable will beconnected to an access panel at one end of the fiber

optic span under test. Optionally, a receive cable can be

attached at the far end.

OTDR

Launch Cable

Panel PanelSplice Closure

Receive Cable

8/14/2019 Ver. E 100607

16/30

OTDR Trace Analysis

PowerL

oss

Distance Scale

Launch Cable Receive CableOTDR

Network Under Test

Splice

8/14/2019 Ver. E 100607

17/30

Most commonly, users manipulate two cursors, A and B, toillustrate what is referred to as two point loss on an OTDR result.

This can be used to show loss in a single event or in a group ofevents. These cursors can be individually moved left and right tospecific points on the result.

OTDR Trace Analysis

A B

8/14/2019 Ver. E 100607

18/30

OTDR Trace Analysis

B

PowerL

oss

Distance Scale

Use cursor/markers to isolate individual events, such as

the repair splice location (above)

8/14/2019 Ver. E 100607

19/30

OTDR Trace Analysis

B

PowerL

oss

Distance Scale

or the two point loss (attenuation) of an entire

network span (above)

8/14/2019 Ver. E 100607

20/30

OTDR Trace Analysis

B

PowerL

oss

Distance Scale

or the physical length of a fiber span (above).

8/14/2019 Ver. E 100607

21/30

OTDR Setup - RangeOTDRs have four basic setup requirements regardless of brand:

Range/Resolution, Pulse Width, Index of Refraction and Time(number of

averages). If any of these settings contradicts another, the results will bepoor. The first one to consider is Range or distance of fiber to test.

Many OTDRs have automatic length detection functions, but if the lengthis known, the user can set the range manually. The range setting should

be adjusted to no less than 1.5 to 2x the fiber span under test.

2975 spanunder test

Set to

>6000

8/14/2019 Ver. E 100607

22/30

Too short: less thanlink length

Link

Cant see entire link unpredictable results

Good: about 1.5x to2x link length

Link

Good trace cansee end of fiber.

Too long: much largerthan link length

Link

Trace is squashedinto left side of display.

OTDR Setup - Range: Summary

8/14/2019 Ver. E 100607

23/30

OTDR Setup - PulseWidthLonger pulse widths are used for longer range tests. As distanceincreases, pulse width must go up, otherwise traces will appear

noisy and rough. Similarly, short traces will be inconclusive if longpulse widths are used (events may be missed or clipped). Long cablespan=longer pulse width, Short cable span= short pulse width

ShortFiber run

under test>6500

LongFiber run

under test>10,000

8/14/2019 Ver. E 100607

24/30

Too wide:

Cant resolve events

About right:

Events can be seenand trace is smooth.

Too narrow:

Trace disappearsinto noise floor.

Link Link Link

Where is this

this event?

OTDR Setup - PulseWidth: Summary

8/14/2019 Ver. E 100607

25/30

Index of Refraction (IOR)In review, the Index of Refraction is a way of measuring the speed of lightin a material. Light travels fastest in a vacuum, such as outer space. The

actual speed of light in a vacuum is 300,000 kilometers per second, or186,000 miles per second. Index of Refraction is calculated by dividing the

speed of light in a vacuum by the speed of light in some other medium(such as glass in the case of fiber optics!).

Medium Typical Index of Refraction Speed

Vacuum

Air

Water

Cladding

Core

1.0000

1.0003

1.33

1.46

1.48

Faster

Slower

Index of Refraction =Speed of Light in a Vacuum

Speed of Light in a Medium

8/14/2019 Ver. E 100607

26/30

OTDR Setup Index Of RefractionEach different optical glass fiber has a different refractive index

profile consistent with its type and manufacture process. Typical

G.652.B singlemode fiber from Draka has an index number of 1.467@ 1310nm and 1.468 @ 1550nm. Note that the longer thewavelength, the faster the light travels through the core.

The user must set the OTDR to the proper GIR (Group Index ofRefraction). If the GIR is not set to the proper number, the OTDR

may overestimate or underestimate linear cable footage. Since theindex is a measure of the speed of light, if the GIR is not set

properly, the OTDR cannot calculate the proper footage.

If the actual index is not known, use the machines default or thefollowing guidelines:

MM 850nm 1.496MM 1300nm 1.491

(Corning SMF28e) SM 1310nm - 1.4677(Corning SMF28e) SM 1550nm 1.4682

8/14/2019 Ver. E 100607

27/30

Index Of Refraction: SummaryAs discussed earlier, Index of Refraction is a measure of the

speed of light in a medium. If the Group Index of Refraction (GIR)setting in the OTDR does not match that of the fiber under test,

the results will show incorrect distances as a result.

10,000 of fiberGIR 1.4677 @ 1310nm

GIR set at1.462

OTDR thinks

Footage is 9,800

LaunchCord

8/14/2019 Ver. E 100607

28/30

OTDRAveraging TimeAveraging time refers to how long the user allows the device to take

samples (a.k.a. how long the test runs). The longer the

testing/averaging time allowed, the better the result. Eventually, enoughdata is averaged for a good test and continuing to test wont yield any

more of an accurate result.

LaunchCord

MUTOA

Corning

OV1000

8/14/2019 Ver. E 100607

29/30

Too many

Trace is smooth butwaste of time.

About right:

Trace is smooth.

Too few:

Trace is noisy noisefloor is too high.

Link Link Link

OTDR Setup - Averages: Summary

8/14/2019 Ver. E 100607

30/30

LSA lines are an effective method of getting more accurate testresults. Most OTDRs have loss estimation based on the simple 2-point

method, but use of LSAs obtain better accuracy through events bycalculating lead-in slope and tail-out slope. See below for an example:

OTDR Trace Analysis

A B

Lead in Area

Tail out Area