W }i Wpurchasing.gcsnc.com/RFQAttachments/ErwinESWalkincooler...Sporlan TXV, LLSV,T-stat 1 SmartVap AD with Sporlan TXV + Solvlv Danfoss TXV, LLSV, T-stat EEV Kit - Sporlan EEV + Kelvin

Project: VB‐0197.1 ErwinMontessori

From: Vision BuildersJimi Liddic305 Foster AvenueCharlotte, NC 28203704‐494‐7229 (Contact)

To:

02/18/2018

∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙1

∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙5

∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙6

∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙10

∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙14

∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙15

∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙19

∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙23

∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙28

∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙29

Table of Contents

WALK‐IN COOLER/FREEZER ‐ BALLY REFRIGERATED BOXES CUSTOM (ITEM 01)

COOLER LIGHTS ‐ BALLY REFRIGERATED BOXES CUSTOM (ITEM 01.1)COOLER EVAPORATOR COIL ‐ BALLY REFRIGERATED BOXES BLP211MA‐S18T (ITEM01.2)COOLER CONDENSING UNIT ‐ BALLY REFRIGERATED BOXES BQZA008H8‐HT3A (ITEM01.3)

FREEZER LIGHT & DOOR HEAT ‐ BALLY REFRIGERATED BOXES CUSTOM (ITEM 01.4)FREEZER EVAPORATOR COIL ‐ BALLY REFRIGERATED BOXES BLP209LE‐S2B‐T (ITEM01.5)FREEZER CONDENSING UNIT ‐ BALLY REFRIGERATED BOXES BQZA020L8‐HT3A (ITEM01.6)

WIRE SHELVING ‐ METRO 2142NK3 (ITEM 02.1)



02/18/2018Submittal SheetITEM# 01 ‐ WALK‐IN COOLER/FREEZER (1 EA REQ'D)Bally CUSTOM

Bally Refrigerated Boxes CUSTOM Item #01

VB‐0197.1 Erwin Montessori Vision Builders Page: 1

SYSTEMS LOAD SUMMARY

0 0 PAGE 1 OF 15

Prepared By Prepared ForLAURA IBBITSON

SWANSON-GIRARD AND ASSOCIATES10420 SOUTHERN LOOP BLVD

PINEVILLE, NC28134 USA

Ph: 888-521-0778Fx: 704-521-8801

Email: [email protected]

ERWIN MONTESSORIGREENSBORO, NC

System : COOLERApplication General Walk-in Cooler Location Indoor

Internal Temp 35 ºF Internal RH 84% External Temp 85 ºF External RH 55%Wall Load 972 BTUH Infiltration 2,022 BTUH Products 648 BTUH Miscellaneous 815 BTUH

22% 45% 15% 18%Design 4,457 BTUH Safety 4,902 BTUH Run Time 16 hrs Required 7,353 BTUH

SST 25.8 ºF Evaporator TD 8.7 ºF Capacity 9,065 BTUH

System : FREEZERApplication General Walk-in Freezer Location Indoor

Internal Temp -10 ºF Internal RH 95% External Temp 85 ºF External RH 55%Wall Load 2,176 BTUH Infiltration 640 BTUH Products 201 BTUH Miscellaneous 827 BTUH

57% 17% 5% 22%Design 3,844 BTUH Safety 4,229 BTUH Run Time 18 hrs Required 5,638 BTUH

SST -18.8 ºF Evaporator TD 8.3 ºF Capacity 7,122 BTUH

Bally CUSTOM Item #01


COOLER LOAD CALCULATION

0 0 PAGE 2 OF 15

COOLING REQUIREMENTSApplication General Walk-in Cooler Location Indoor

Internal Temp 35 ºF Internal RH 84% External Temp 85 ºF External RH 55%Wall Load 972 BTUH Infiltration 2,022 BTUH Products 648 BTUH Miscellaneous 815 BTUH

22% 45% 15% 18%

WALL, FLOOR AND CEILING LOADS

Section Construction Thickness(in) K Factor R ValueExt Temp

(ºF)Dim 1(ft)

Dim 2(ft)

Area(ft²)

Load(BTUH)

Rear Urethane, Standard panels 4.000 0.14 28.57 35.0 13.50 8.50 95Door 15.00 35.0 3.00 6.50 20

Right End Urethane, Standard panels 4.000 0.14 28.57 85.0 8.80 8.50 75 131Front Urethane, Standard panels 4.000 0.14 28.57 85.0 13.50 8.50 95 167

Door 15.00 85.0 3.00 6.50 20 65Left End Urethane, Standard panels 4.000 0.14 28.57 85.0 8.80 8.50 75 131

Floor Insulated Floor - Panels On Concrete On Grade 10.000 0.31 32.32 13.50 8.80 119 271

Ceiling Urethane, Standard panels 4.000 0.14 28.57 85.0 13.50 8.80 119 208TOTAL WALL, FLOOR AND CEILING LOAD 972VOLUME (ft³) 1,010

INFILTRATION LOAD : ESTIMATED BY VOLUME AND USAGE

Box Usage Internal Temp(ºF)Internal Rh

(%)External Temp

(ºF)External Rh

(%)Ventilation

(CFM)Load

(BTUH)Heavy 35 84 85 55 2,022

PRODUCT LOADS

Type Weight(lb)Enter Temp

(ºF)Final Temp

(ºF)Pull Down

(hrs)Load

(BTUH)General, Mixed Products, Approximation 2,020 45.0 35.0 24 648

TOTAL PRODUCT LOAD 648TOTAL PRODUCT WEIGHT (lbs) 2,020

MISCELLANEOUS LOADS

Quantity Description Power Units Run Time(hrs)Load

(BTUH)LIGHTING 405241 W/ft²

EVAPORATOR MOTORS 409242 60 W

TOTAL MISCELLANEOUS LOAD 815

SYSTEM DESIGN SUMMARYDesign Load

(BTUH)

Safety Factor

Safety Load

(BTUH)

Run Time(Hours)

Capacity Required(BTUH)

RefrigerantLine

Frequency(Hz)

Design TD(ºF)

Line Loss(ºF)

Condenser Ambient

(ºF)4,457 10% 4,902 16 7,353 R448A 60 10.1 0.5 100

SYSTEM EQUIPMENT SELECTION

Equipment Type Quantity Model Number Description Voltage Rating(BTUH)Condensing Unit 1 BQZA008H8-HT3A Quiet Line - Scroll|Condensing Units-Air 208-230/3/60 8,792

Evaporator 1 BLP211MA-S1B-T Low Profile|Evaporator 115/1/60 10,555

SYSTEM BALANCEFan Load (BTUH) Suction Temp (ºF) Evaporator TD (ºF) System Capacity (BTUH)

25.8 8.7 9,065



FREEZER LOAD CALCULATION

0 0 PAGE 9 OF 15

COOLING REQUIREMENTSApplication General Walk-in Freezer Location Indoor

Internal Temp -10 ºF Internal RH 95% External Temp 85 ºF External RH 55%Wall Load 2,176 BTUH Infiltration 640 BTUH Products 201 BTUH Miscellaneous 827 BTUH

57% 17% 5% 22%

WALL, FLOOR AND CEILING LOADS

Section Construction Thickness(in) K Factor R ValueExt Temp

(ºF)Dim 1(ft)

Dim 2(ft)

Area(ft²)

Load(BTUH)

Rear Urethane, Standard panels 4.000 0.14 28.57 85.0 13.50 8.50 115 382Right End Urethane, Standard panels 4.000 0.14 28.57 85.0 9.80 8.50 83 277

Front Urethane, Standard panels 4.000 0.14 28.57 45.0 13.50 8.50 95 183Door 15.00 45.0 3.00 6.50 20 71

Left End Urethane, Standard panels 4.000 0.14 28.57 85.0 9.80 8.50 83 277

Floor Insulated Floor - Panels On Concrete On Grade 10.000 0.31 32.32 13.50 9.80 132 546

Ceiling Urethane, Standard panels 4.000 0.14 28.57 85.0 13.50 9.80 132 440TOTAL WALL, FLOOR AND CEILING LOAD 2,176VOLUME (ft³) 1,125

INFILTRATION LOAD : ESTIMATED BY DOORS AND OPENINGS

Quantity Door or Opening Type Height(in)Width(in)

External Temp(ºF)

External Rh(%)

Open Time(hrs) Curtains

Load(BTUH)

1 Door 78.00 36.00 45.0 55.0 0.18 None 640

TOTAL INFILTRATION LOAD ESTIMATED BY DOORS AND OPENINGS 640

PRODUCT LOADS

Type Weight(lb)Enter Temp

(ºF)Final Temp

(ºF)Pull Down

(hrs)Load

(BTUH)General, Mixed Products, Approximation 1,125 0.0 -10.0 24 201

TOTAL PRODUCT LOAD 201TOTAL PRODUCT WEIGHT (lbs) 1,125

MISCELLANEOUS LOADS

Quantity Description Power Units Run Time(hrs)Load

(BTUH)LIGHTING 451241 W/ft²

EVAPORATOR MOTORS 375222 60 W

TOTAL MISCELLANEOUS LOAD 827

SYSTEM DESIGN SUMMARYDesign Load

(BTUH)

Safety Factor

Safety Load

(BTUH)

Run Time(Hours)

Capacity Required(BTUH)

RefrigerantLine

Frequency(Hz)

Design TD(ºF)

Line Loss(ºF)

Condenser Ambient

(ºF)3,844 10% 4,229 18 5,638 R448A 60 10 0.5 100

SYSTEM EQUIPMENT SELECTION

Equipment Type Quantity Model Number Description Voltage Rating(BTUH)Condensing Unit 1 BQZA020L8-HT3A Quiet Line - Scroll|Condensing Units-Air 208-230/3/60 6,820

Evaporator 1 BLP209LE-S2B-T Low Profile|Evaporator 208-230/1/60 8,550

SYSTEM BALANCEFan Load (BTUH) Suction Temp (ºF) Evaporator TD (ºF) System Capacity (BTUH)

-18.8 8.3 7,122



02/18/2018Submittal SheetITEM# 01.1 ‐ COOLER LIGHTS (1 EA REQ'D)Bally CUSTOM

Bally Refrigerated Boxes CUSTOM Item #01.1


02/18/2018Submittal SheetITEM# 01.2 ‐ COOLER EVAPORATOR COIL (1 EA REQ'D)Bally BLP211MA‐S18T

Bally Refrigerated Boxes BLP211MA‐S18T Item #01.2


NATIONAL REFRIGERATION ANDAIR CONDITIONING CANADA CORP. BLP211MA-S1B-T159 ROY BLVD, PO BOX 2020BRANTFORD, ONCANADA N3T 5Y6

LOW PROFILEEVAPORATOR

PURCHASER : Erwin Montessori SUBMITTED BY : Laura IbbitsonPROJECT : Erwin Montessori DATE : 14 Feb 2018ORDER # : -A00 ITEM # : 0QUOTE # : ID # :

PURCHASER'S PO # : TAGGING :

DISTRIBUTOR 1/2 in SOUND - REC CAPACITY APPROVALSSUCTION 7/8 in WEIGHT 74 lb REF CHARGE 2 lb

NOTES:† MCA.. Minimum Circuit Ampacity, ‡ MOP.. Maximum Overcurrent Protection

APPROVED BY : DATE :

Approval of this drawing signifies that the equipment is acceptable under the provision of the job specifications. Any change made hereon by any person whomsoever subject to acceptance by NATIONAL REFRIGERATION at its home office.

PAGE 6 OF 15

VOLTAGE SYSTEM REFRIGERANT AIR FLOW EVAP. TEMP BOX TEMP CAPACITY115/1/60 R448A 1910 CFM 26.3 ºF 35 ºF 10555 BTUH

FANS HEATERS CIRCUIT TOTALQTY POWER FLA/FAN TYPE QTY AMPS AMPS WATTS MCA† MOP‡2 0.07HP 1 2 120 2.3 15

MODEL FEATURES• 3/8" Tubing coil construction (reduces refrigerant operating charge)• Factory installed solenoid valve wire harness• Heavy gauge textured aluminum cabinet construction resists scratches/corrosion• Spacious piping end compartment allows for easy assembly

• Hinged drain pan with central universal drain connection (3/4" drain)• Front access to spacious electrical and header compartments• Schrader connection on suction header• Attractive and durable high density polyethylene fan guards

• Ultra efficient Electronically Commutated Motor (ECM)• ** ECM with SmartSpeed Technology• High efficiency enhanced copper tube and aluminium fin coil design• 6 FPI

MODEL OPTIONS ( * = Shipped Loose )PRE-ASSEMBLED EVAP

Sporlan TXV, LLSV,T-statSmartVap AD with Sporlan TXV + Solvlv1Danfoss TXV, LLSV, T-statEEV Kit - Sporlan EEV + Kelvin IIEEV Kit - Emerson EEV + EXD-SH1KE2 Evap Efficiency w/Sporlan TXVKE2 Evap Efficiency w/Sporlan EEV*KE2 Evap Efficiency w/Sporlan TXV*KE2 Evap Efficiency w/Sporlan EEVKE2 Evap Efficiency w/KE2 EEV*KE2 Evap Efficiency w/KE2 EEVCarel EEV Kit + KE2Temp+Defrost

Aux Sideport ConnectorCABINET FINISH

Painted WhitePainted BlackStainless Steel

SENSORS FOR CPC I|O BOARDSCoil Temp SensorReturn Air Temp SensorSuction Pressure Transducer

DEMAND DEFROST ELECTRONIC CONTROLLER

KE2 Therm Evaporator Efficiency*KE2 Therm Evaporator Efficiency

Dual CircuitELECTRONIC CONTROLLER

KE2 Temp+DefrostSmartVap Air Defrost1

EXPANSION VALVESporlan TXV1Emerson TXVSporlan EEVEmerson EEVCarel E2V + EVD ice Controller

SENSOR + TRANSDUCER FOR EEVfor use with Emerson EEVfor use with KE2 Therm EEVOther Brand - Specify in Notes

ELECTRONIC SH CONTROLLER FOR EEV

*Sporlan Kelvin II EEV Controller*Emerson EEV Controller*Other EEV Controller- Specify MFR Model in Notes

Evaporator Disconnect SwitchEVAPORATOR PRISON PACKAGE

Tamper Proof ScrewsExport CratingCOIL COATING

Heresite CoatingElectroFin Coating

FIN AND MATERIALGold Coat FinsCopper Fins

Insulated Drain PanKE2 THERM

*SmartGate Router #20695*8 Port Switch #20166*CAT5e Shielded Cable - 50ft w/connectors40' Leads on Sensors + Transducers

KE2 THERM ContinuedEthernet Adapter Kit

*Liquid / Suction Heat ExchangerLIQUID LINE SOLENOID VALVE

Sporlan1EmersonBy Others Field Supplied

Dual Voltage Coil 120-230V Field WiredNitrogen Charged and SealedROOM THERMOSTATS

Mechanical*Mechanical*Johnson A19ABC*Johnson A421ABC-02CRanco ETC-111000*Ranco ETC-111000Johnson A421ABC-02

Wire Fan GuardsREMOTE DEFROST PANEL

*230V Control*115V Control

INSTALLATION REQUIREMENTSMinimum slope of 1" per foot on all drain lines

1

P-trap per evap required ouside of box1

Bally BLP211MA‐S18T Item #01.2


NATIONAL REFRIGERATION ANDAIR CONDITIONING CANADA CORP. BLP211MA-S1B-T159 ROY BLVD, PO BOX 2020BRANTFORD, ONCANADA N3T 5Y6





PAGE 7 OF 15

SELECTED OPTION DESCRIPTIONSElectronic Controller - SmartVap Air Defrost

Air Defrost Timer and Thermostat in one. Factory installed andwired.

Expansion Valve - Sporlan TXVMay be Type EBQ, S, SBF, O externally equalized thermostaticexpansion valve. Valves are selected using the specifiedcapacity and operating conditions of the refrigeration systemas specified on the accompanying Certified Prints.

Installation Requirements - Minimum slope of 1" perfoot on all drain lines

Bally recommends a minimum slope of 1" per foot on all drainlines.

Installation Requirements - P-trap per evap requiredouside of box

All evaporators must be trapped individually outside of the boxto prevent vapor migration back to coil surface.

Liquid Line Solenoid Valve - SporlanSporlan solenoid coil voltage matches evaporator voltageexcept when evaporator is 460V, then 230V solenoid coil isused. Exceptions must be clearly explained in the Notes of theoption.

Pre-assembled Evap - SmartVap AD with Sporlan TXV +Solvlv

Option Package consists of factory installed and wired BallySmartVap Air Defrost electronic controller, Sporlan balanceport TXV and Sporlan liquid line solenoid valve.

Bally BLP211MA‐S18T Item #01.2


NATIONAL REFRIGERATION ANDAIR CONDITIONING CANADA CORP.

Order Item No: 0

BLP211MA-S1B-T159 ROY BLVD, PO BOX 2020BRANTFORD, ONCANADA N3T 5Y6


NATIONAL REFRIGERATION will furnish equipment in accordance with this drawing and specifications, and subject to its published warranty. Approval of this drawing signifies that the equipment is acceptable under the provision of the job specifications. Any change made hereon by any person whomsoever subject to acceptance

by NATIONAL REFRIGERATION at its home office.

DATE : 14 Feb 2018PURCHASER : Erwin Montessori

PROJECT : Erwin MontessoriSUBMITTED BY : Laura Ibbitson

Dimensions shown are for standard unit less options.

DIMENSIONSDIMENSION A 46 1/4 inDIMENSION B 33 1/4 inDIMENSION CDIMENSION DDIMENSION EDIMENSION FDIMENSION G 0 inDIMENSION H

CONNECTIONSDISTRIBUTOR 1/2 in

SUCTION 7/8 inDRAIN 3/4 inWATER

DISCHARGEPAN LOOP

HOT GAS SIDE PORTHOT GAS INLET

HOT GAS OUTLETOTHER

SHIPPING WEIGHT 74 lbREFRIGERANT CHARGE 2 lbRECEIVER CAPACITY

APPROVALS

NOTES:

PAGE 8 OF 15

BallyBLP211M

A‐S18TItem

#01.2

VB‐0197.1 Erwin M

ontessoriVision Builders

Page: 9

02/18/2018Submittal SheetITEM# 01.3 ‐ COOLER CONDENSING UNIT (1 EA REQ'D)Bally BQZA008H8‐HT3A

Bally Refrigerated Boxes BQZA008H8‐HT3A Item #01.3


NATIONAL REFRIGERATION ANDAIR CONDITIONING CANADA CORP. BQZA008H8-HT3A159 ROY BLVD, PO BOX 2020BRANTFORD, ONCANADA N3T 5Y6

QUIET LINE - SCROLLCONDENSING UNITS-AIR



LIQUID 3/8 in SOUND 58dBA REC CAPACITY 11 lb APPROVALSSUCTION 5/8 in WEIGHT 300 lb REF CHARGE

NOTES: † MCA.. Minimum Circuit Ampacity, ‡ MOP.. Maximum Overcurrent Protection MCA & MOP are for the condensing unit ONLY. Single point connections WILL show different on dataplate.



PAGE 3 OF 15

VOLTAGE SYSTEM REFRIGERANT RATING SUCTION TEMP AMBIENT TEMP CAPACITY208-230/3/60 R448A 0.8Hp 25.8 ºF 100 ºF 8792 BTUH

FANS COMPRESSOR CIRCUIT TOTALQTY POWER FLA/FAN TYPE QTY RLA LRA AMPS WATTS MCA† MOP‡1 165W 1.7 ZB07KAE-TF5 5.2 37.8 6.9 8.2 15

MODEL FEATURES• Copper tubing secured with cushion clamps• Discharge line thermostat• Pre-formed piping• Receiver with fusible plug and liquid shut off valve• Space saving, compact design• Sturdy electrical control box with compressor contactor and fused control circuit

• Suction and discharge service valves• Weatherproof electrical control box with compressor contactor and fused control circuit• Welded hermetic Scroll compressor• Heavy gauge galvanized steel cabinet construction

• Ultra efficient Electronically Commutated Motor (ECM)• Unit shipped with Nitrogen Holding Charge• Powder Coat Painted Cabinet• Gold Coat Fins• High efficiency enhanced copper tube and aluminium fin coil design• EC Motor Speed Controller

MODEL OPTIONS ( * = Shipped Loose )PRE-ENGINEERED OPTION PACKAGE

A - STDBCD1EFGHJK

DEFROST FUSING - SHOW SET QTY35 Amps to 60 Amps

DEFROST KIT(USE WITH KE2)

Up to 30A per Evap115V Control Circuit

Compressor Sound InsulationDischarge Line Check ValveDISCONNECT SWITCH

Non-FusedExport CratingExtended 4-Year Compressor WarrantyExtended Leg KitCOIL COATING


FIN AND MATERIALCopper Fins

Heated and Insulated Receiver1LIQUID LINE FILTER + SIGHT GLASS

Sealed1One Time Pump Down

Oversized ReceiverPump Down Toggle SwitchSUCTION ACCUMULATOR

Without Heat ExchangerSUCTION FILTER

Sealed TypeTIME CLOCK

Paragon 8145 Style*230V Paragon 8145 Style*115V Paragon 8145 Style1

Two Valve AdjustableFlooded Head Pressure ControlWall Mount KitWind Guard1QuickVac Valves

Bally BQZA008H8‐HT3A Item #01.3


NATIONAL REFRIGERATION ANDAIR CONDITIONING CANADA CORP. BQZA008H8-HT3A159 ROY BLVD, PO BOX 2020BRANTFORD, ONCANADA N3T 5Y6





PAGE 4 OF 15

SELECTED OPTION DESCRIPTIONSHeated and Insulated Receiver

Self regulating 8W/ft heater wrapped in 1/2" Rubatex orequivalent insulation. Heater voltage matched control circuit.Receiver CRN and U-A1 form available upon request.

Liquid Line Filter + Sight Glass - SealedSporlan C Series with ODF solder connections and Sporlan SAmoisture indicator factory installed in liquid line.

Pre-Engineered Option Package - DLiquid line filter drier and sightglass: Sporlan C Seriesfilter-drier with ODF solder connections and Sporlan SAmoisture indicator factory installed in liquid line.Heated and Insulated Receiver: Self regulating 8W/ft heaterwrapped in 1/2" Rubatex or equivalent insulation. Heatervoltage matched control circuit. Receiver CRN and U-A1 formavailable upon request.

Time Clock - 115V Paragon 8145 Style115V Defrost timer is time initiated, temperature or pressureterminated with a timed failsafe. Timer is shipped loose in abox for field installation.

Wind GuardFor use with EC Motors. Prevents uncontrolled airflow throughthe condenser in ambients less than 10°F .

Bally BQZA008H8‐HT3A Item #01.3



Order Item No: 0

BQZA008H8-HT3A159 ROY BLVD, PO BOX 2020BRANTFORD, ONCANADA N3T 5Y6







DIMENSIONSDIMENSION ADIMENSION BDIMENSION CDIMENSION DDIMENSION EDIMENSION FDIMENSION GDIMENSION H

CONNECTIONSLIQUID 3/8 in

SUCTION 5/8 inDRAINWATER

DISCHARGEPAN LOOP


HOT GAS OUTLETOTHER

SHIPPING WEIGHT 300 lbREFRIGERANT CHARGERECEIVER CAPACITY 11 lb

APPROVALS

NOTES:

PAGE 5 OF 15

BallyBQ

ZA008H8‐H

T3AItem

#01.3

VB‐0197.1 Erwin M


Page: 13

02/18/2018Submittal SheetITEM# 01.4 ‐ FREEZER LIGHT & DOOR HEAT (1 EA REQ'D)Bally CUSTOM

Bally Refrigerated Boxes CUSTOM Item #01.4


02/18/2018Submittal SheetITEM# 01.5 ‐ FREEZER EVAPORATOR COIL (1 EA REQ'D)Bally BLP209LE‐S2B‐T

Bally Refrigerated Boxes BLP209LE‐S2B‐T Item #01.5


NATIONAL REFRIGERATION ANDAIR CONDITIONING CANADA CORP. BLP209LE-S2B-T159 ROY BLVD, PO BOX 2020BRANTFORD, ONCANADA N3T 5Y6




DISTRIBUTOR 1/2 in SOUND - REC CAPACITY APPROVALSSUCTION 7/8 in WEIGHT 80 lb REF CHARGE 2 lb

NOTES:† MCA.. Minimum Circuit Ampacity, ‡ MOP.. Maximum Overcurrent Protection



PAGE 13 OF 15

VOLTAGE SYSTEM REFRIGERANT AIR FLOW EVAP. TEMP BOX TEMP CAPACITY208-230/1/60 R448A 1910 CFM -18.3 ºF -10 ºF 8550 BTUH

FANS HEATERS CIRCUIT TOTALQTY POWER FLA/FAN TYPE QTY AMPS AMPS WATTS MCA† MOP‡2 0.07HP 0.6 1.2 120 1.4 15

DEFROST HTRS 8.2 1890 10.3 15

MODEL FEATURES• 3/8" Tubing coil construction (reduces refrigerant operating charge)• Factory installed solenoid valve wire harness• Heavy gauge textured aluminum cabinet construction resists scratches/corrosion• Spacious piping end compartment allows for easy assembly

• Hinged drain pan with central universal drain connection (3/4" drain)• Front access to spacious electrical and header compartments• Schrader connection on suction header• Attractive and durable high density polyethylene fan guards

• Ultra efficient Electronically Commutated Motor (ECM)• ** ECM with SmartSpeed Technology• High efficiency enhanced copper tube and aluminium fin coil design• 6 FPI

MODEL OPTIONS ( * = Shipped Loose )PRE-ASSEMBLED EVAP

Sporlan TXV, LLSV,T-statSmartVap ED with Sporlan TXV + Solvlv1Danfoss TXV, LLSV, T-statEEV Kit - Sporlan EEV + Kelvin IIEEV Kit - Emerson EEV + EXD-SH1KE2 Evap Efficiency w/Sporlan TXVKE2 Evap Efficiency w/Sporlan EEV*KE2 Evap Efficiency w/Sporlan TXV*KE2 Evap Efficiency w/Sporlan EEVKE2 Evap Efficiency w/KE2 EEV*KE2 Evap Efficiency w/KE2 EEVCarel EEV Kit + KE2 Adaptive

DEFROST THERMOSTATSJohnson A19 for Fan DelayRanco F25 - Adj DT, Fixed FD

Aux Sideport ConnectorCABINET FINISH

Painted WhitePainted BlackStainless Steel

SENSORS FOR CPC I|O BOARDSCoil Temp SensorReturn Air Temp SensorSuction Pressure Transducer

DEMAND DEFROST ELECTRONIC CONTROLLER

KE2 Therm Evaporator Efficiency*KE2 Therm Evaporator Efficiency

Dual Circuit

ELECTRONIC CONTROLLERKE2 Adaptive Control*KE2 Adaptive ControlSmartVap Electric Defrost1

EXPANSION VALVESporlan TXV1Emerson TXVSporlan EEVEmerson EEVCarel E2V + EVD ice Controller

SENSOR + TRANSDUCER FOR EEVfor use with Emerson EEVfor use with KE2 Therm EEVOther Brand - Specify in Notes

ELECTRONIC SH CONTROLLER FOR EEV*Sporlan Kelvin II EEV Controller*Emerson EEV Controller*Other EEV Controller- Specify MFR Model in Notes

EVAPORATOR PRISON PACKAGETamper Proof Screws

Export CratingCOIL COATING


FIN AND MATERIALGold Coat FinsCopper Fins

Insulated Drain PanKE2 THERM

*SmartGate Router #20695*8 Port Switch #20166

KE2 THERM Continued*CAT5e Shielded Cable - 50ft w/connectors*Contactor Kit - 50A 120V ctrl #2021740' Leads on Sensors + TransducersEthernet Adapter Kit

*Liquid / Suction Heat ExchangerLIQUID LINE SOLENOID VALVE

Sporlan1EmersonBy Others Field Supplied

Dual Voltage Coil 120-230V Field WiredNitrogen Charged and SealedROOM THERMOSTATS

Mechanical*Mechanical*Johnson A19ABC*Johnson A421ABC-02CRanco ETC-111000*Ranco ETC-111000Johnson A421ABC-02

Wire Fan GuardsREMOTE DEFROST PANEL

*230V Control*115V Control

INSTALLATION REQUIREMENTSMinimum slope of 1" per foot on all drain lines

1

P-trap per evap required ouside of box1Insulated drain line requires heat - 20W/ft1

Bally BLP209LE‐S2B‐T Item #01.5


NATIONAL REFRIGERATION ANDAIR CONDITIONING CANADA CORP. BLP209LE-S2B-T159 ROY BLVD, PO BOX 2020BRANTFORD, ONCANADA N3T 5Y6





PAGE 14 OF 15

SELECTED OPTION DESCRIPTIONSElectronic Controller - SmartVap Electric Defrost

Electric Defrost Timer and Thermostat in one. Factory installedand wired.

Expansion Valve - Sporlan TXVMay be Type EBQ, S, SBF, O externally equalized thermostaticexpansion valve. Valves are selected using the specifiedcapacity and operating conditions of the refrigeration systemas specified on the accompanying Certified Prints.

Installation Requirements - Insulated drain linerequires heat - 20W/ft

Freezer condensate drain lines must be insulated and heatedwith a minimum of 20 watts per foot.

Installation Requirements - Minimum slope of 1" perfoot on all drain lines

Bally recommends a minimum slope of 1" per foot on all drainlines.

Installation Requirements - P-trap per evap requiredouside of box

All evaporators must be trapped individually outside of the boxto prevent vapor migration back to coil surface.

Liquid Line Solenoid Valve - SporlanSporlan solenoid coil voltage matches evaporator voltageexcept when evaporator is 460V, then 230V solenoid coil isused. Exceptions must be clearly explained in the Notes of theoption.

Pre-assembled Evap - SmartVap ED with Sporlan TXV +Solvlv

Option Package consists of factory installed and wired BallySmartVap Electric Defrost electronic defrost controller, Sporlanbalance port TXV and Sporlan liquid line solenoid valve.

Bally BLP209LE‐S2B‐T Item #01.5



Order Item No: 0

BLP209LE-S2B-T159 ROY BLVD, PO BOX 2020BRANTFORD, ONCANADA N3T 5Y6







DIMENSIONSDIMENSION A 46 1/4 inDIMENSION B 33 1/4 inDIMENSION CDIMENSION DDIMENSION EDIMENSION FDIMENSION G 0 inDIMENSION H

CONNECTIONSDISTRIBUTOR 1/2 in

SUCTION 7/8 inDRAIN 3/4 inWATER

DISCHARGEPAN LOOP


HOT GAS OUTLETOTHER

SHIPPING WEIGHT 80 lbREFRIGERANT CHARGE 2 lbRECEIVER CAPACITY

APPROVALS

NOTES:

PAGE 15 OF 15

BallyBLP209LE‐S2B‐T

Item #01.5

VB‐0197.1 Erwin M


Page: 18

02/18/2018Submittal SheetITEM# 01.6 ‐ FREEZER CONDENSING UNIT (1 EA REQ'D)Bally BQZA020L8‐HT3A

Bally Refrigerated Boxes BQZA020L8‐HT3A Item #01.6


NATIONAL REFRIGERATION ANDAIR CONDITIONING CANADA CORP. BQZA020L8-HT3A159 ROY BLVD, PO BOX 2020BRANTFORD, ONCANADA N3T 5Y6




LIQUID 3/8 in SOUND 56dBA REC CAPACITY 11 lb APPROVALSSUCTION 7/8 in WEIGHT 320 lb REF CHARGE

NOTES: † MCA.. Minimum Circuit Ampacity, ‡ MOP.. Maximum Overcurrent Protection MCA & MOP are for the condensing unit ONLY. Single point connections WILL show different on dataplate.



PAGE 10 OF 15

VOLTAGE SYSTEM REFRIGERANT RATING SUCTION TEMP AMBIENT TEMP CAPACITY208-230/3/60 R448A 2Hp -18.8 ºF 100 ºF 6820 BTUH

FANS COMPRESSOR CIRCUIT TOTALQTY POWER FLA/FAN TYPE QTY RLA LRA AMPS WATTS MCA† MOP‡1 165W 1.7 ZF06K4E-TF5-241 9.3 55 11 13.3 20

MODEL FEATURES• Copper tubing secured with cushion clamps• Discharge line thermostat• Pre-formed piping• Receiver with fusible plug and liquid shut off valve• Space saving, compact design• Sturdy electrical control box with compressor contactor and fused control circuit

• Suction and discharge service valves• Weatherproof electrical control box with compressor contactor and fused control circuit• Welded hermetic Scroll compressor• Heavy gauge galvanized steel cabinet construction

• Ultra efficient Electronically Commutated Motor (ECM)• Unit shipped with Nitrogen Holding Charge• Powder Coat Painted Cabinet• Gold Coat Fins• Liquid injection (low temp models)• High efficiency enhanced copper tube and aluminium fin coil design• EC Motor Speed Controller

MODEL OPTIONS ( * = Shipped Loose )PRE-ENGINEERED OPTION PACKAGE

A - STDBCD1EFGHJK

DEFROST FUSING - SHOW SET QTY35 Amps to 60 Amps

DEFROST KIT(USE WITH KE2)

Up to 30A per Evap115V Control Circuit

Compressor Sound InsulationDischarge Line Check ValveDISCONNECT SWITCH

Non-FusedExport CratingExtended 4-Year Compressor WarrantyExtended Leg KitCOIL COATING


FIN AND MATERIALCopper Fins

Heated and Insulated Receiver1LIQUID LINE FILTER + SIGHT GLASS

Sealed1One Time Pump Down

Oversized ReceiverPump Down Toggle SwitchSUCTION ACCUMULATOR

Without Heat ExchangerSUCTION FILTER

Sealed TypeTIME CLOCK

Paragon 8145 Style*230V Paragon 8145 Style*115V Paragon 8145 Style

Two Valve AdjustableFlooded Head Pressure ControlWall Mount KitWind Guard1QuickVac Valves

Bally BQZA020L8‐HT3A Item #01.6


NATIONAL REFRIGERATION ANDAIR CONDITIONING CANADA CORP. BQZA020L8-HT3A159 ROY BLVD, PO BOX 2020BRANTFORD, ONCANADA N3T 5Y6





PAGE 11 OF 15

SELECTED OPTION DESCRIPTIONSHeated and Insulated Receiver

Self regulating 8W/ft heater wrapped in 1/2" Rubatex orequivalent insulation. Heater voltage matched control circuit.Receiver CRN and U-A1 form available upon request.

Liquid Line Filter + Sight Glass - SealedSporlan C Series with ODF solder connections and Sporlan SAmoisture indicator factory installed in liquid line.

Pre-Engineered Option Package - DLiquid line filter drier and sightglass: Sporlan C Seriesfilter-drier with ODF solder connections and Sporlan SAmoisture indicator factory installed in liquid line.Heated and Insulated Receiver: Self regulating 8W/ft heaterwrapped in 1/2" Rubatex or equivalent insulation. Heatervoltage matched control circuit. Receiver CRN and U-A1 formavailable upon request.

Wind GuardFor use with EC Motors. Prevents uncontrolled airflow throughthe condenser in ambients less than 10°F .

Bally BQZA020L8‐HT3A Item #01.6



Order Item No: 0

BQZA020L8-HT3A159 ROY BLVD, PO BOX 2020BRANTFORD, ONCANADA N3T 5Y6







DIMENSIONSDIMENSION ADIMENSION BDIMENSION CDIMENSION DDIMENSION EDIMENSION FDIMENSION GDIMENSION H

CONNECTIONSLIQUID 3/8 in

SUCTION 7/8 inDRAINWATER

DISCHARGEPAN LOOP


HOT GAS OUTLETOTHER

SHIPPING WEIGHT 320 lbREFRIGERANT CHARGERECEIVER CAPACITY 11 lb

APPROVALS

NOTES:

PAGE 12 OF 15

BallyBQ

ZA020L8‐HT3A

Item #01.6

VB‐0197.1 Erwin M


Page: 22

02/18/2018Submittal SheetITEM# 02.1 ‐ WIRE SHELVING (4 EA REQ'D)Metro 2142NK3Super Erecta® Shelf, wire, 42"W x 21"D, plastic split sleeves are included in each carton, Metroseal 3™ epoxy‐coatedcorrosion‐resistant finish with Microban® antimicrobial protection, NSFACCESSORIES

Mfr Qty Model Spec

Metro 4 63PK3 Super Erecta® SiteSelect™ Post, 62‐7/16"H,adjustable leveling bolt, posts are grooved at 1"increments & numbered at 2" increments, doublegrooved every 8", Metroseal 3 epoxy coatedcorrosion‐resistant finish with Microban®antimicrobial protection

1 UNITS @4‐TIER EACH

Metro 2142NK3 Item #02.1


Item # ______________________________________________

Job ________________________________________________

InterMetro Industries CorporationNorth Washington Street Wilkes-Barre, PA 18705 www.metro.com

Item # ______________________________________________

Job ________________________________________________ Wire

Shelvin

g10

.01

*MicroBAN® and the MicroBAN® symbol are registered trademarks of the Microban Products company, Huntersville, Nc.

SUPEr ErEcTA SHELF®

WirE SHELviNg• Unique Design: The open wire design of these shelves

minimizes dust accumulation and allows free circulation of air, greater visibility of stored items and greater light penetration.

• Durable Construction: Super Erecta shelves and posts are constructed of heavy-gauge carbon steel or Type 304 stainless steel.

• Choice of Finishes: Super Erecta Brite™ and chrome-plated for dry storage; Metroseal 3™ with Microban® antimicrobial product protection and stainless steel for corrosive environments; and attractive epoxy color options for merchandising applications.

• Versatile: Super Erecta Shelf® wire shelving can adapt to your changing needs. By using various accessories, hundreds of shelving configurations become possible.

• Fast, Secure Assembly: SiteSelect™ Posts have a double groove visual guide feature every 8" (203mm), circular grooves at 1" (25mm) increments, and are numbered at 2" (50mm) intervals. A patented, tapered split sleeve snaps together around each post. Tapered openings in the shelf corners slide over the tapered split sleeves providing a positive lock. Shelf is assembled in minutes without the use of any special tools.

• Adjustability: Shelves can be adjusted at 1" (25mm) intervals along the entire length of the post.

• Shelf Ribs: run front to back, allowing you to slide items on and off shelves smoothly.

• Shelf Accessibility: Shelves can be loaded/unloaded easily from all sides This open construction allows maximum use of storage cube.

• Adjustable Feet: Bolt levelers compensate for surface irregularities.

Note: Stainless stationary posts are equipped with stainless steel leveling feet.

*MicroBAN® and the MicroBAN® symbol are registered trademarks of the Microban Products company, Huntersville, Nc.




WirE SHELviNg

Wire Shelves• Metroseal 3: Metro’s proprietary epoxy coating contains Microban®

antimicrobial product protection. Microban antimicrobial protects the epoxy coating from bacteria, mold, mildew, and fungus that cause odors, stains, and product degradation.

• See spec sheet 10.14 for epoxy color options.• Plastic split sleeves are included with each shelf

replacements are available: cat. No. 9985 (bag of 4)• Aluminum split sleeves are recommended for abusive mobile applications

and autoclave applications. cat. No. 9986Z (bag of 4 with zinc c-rings) cat. No. 9986S (bag of 4 with stainless steel c-rings)

• Load capacity (evenly distributed) per shelf Depths: 14" to 24" (355 to 610mm) 800 ibs. (363kg) for lengths of 18" to 48" (457 to 1219mm) 600 ibs. (272kg) for lengths of 54" (1370mm) or longer

• Load capacity (evenly distributed) per unit. Stationary shelving units have a maximum load capacity (evenly distributed) of 2,000 ibs. (907kg) Mobile units have a maximum capacity of three times the caster load rating up to but not exceeding 1,000 ibs. (453kg) total. consult the Metro catalog for caster load ratings

• SUPEr ErEcTA SHELF meets government Specifications MiL-S-40144E.Aluminum Split Sleeve

Split Sleeve

Approx. Model No. Model No. Model No. Model No. Nominal Width/Length Pkd. Wt. Super Erecta Brite chrome Metroseal 3 with Microban® Stainless (in.) (mm) (lbs.) (kg)

1424Br 1424Nc 1424NK3 1424NS 14x24 355x610 6 2.7 1430 Br 1430Nc 1430NK3 1430NS 14x30 355x760 7 3.2 1436Br 1436Nc 1436NK3 1436NS 14x36 355x914 8 3.6 1442Br 1442Nc 1442NK3 1442NS 14x42 355x1066 91/2 4.3 1448Br 1448Nc 1448NK3 1448NS 14x48 355x1219 101/2 4.7 1460Br 1460Nc 1460NK3 1460NS 14x60 355x1524 14 6.3 1472Br 1472Nc 1472NK3 1472NS 14x72 355x1829 17 7.7 1824Br 1824Nc 1824NK3 1824NS 18x24 457x610 7 3.2 1830Br 1830Nc 1830NK3 1830NS 18x30 457x760 8 3.6 1836Br 1836Nc 1836NK3 1836NS 18x36 457x914 91/2 4.3 1842Br 1842Nc 1842NK3 1842NS 18x42 457x1066 11 5.0 1848Br 1848Nc 1848NK3 1848NS 18x48 457x1219 12 5.4 1854Br 1854Nc 1854NK3 1854NS 18x54 457x1370 141/2 6.6 1860Br 1860Nc 1860NK3 1860NS 18x60 457x1524 17 7.7 1872Br 1872Nc 1872NK3 1872NS 18x72 457x1829 20 9.1 2124Br 2124Nc 2124NK3 2124NS 21x24 530x610 8 3.6 2130Br 2130Nc 2130NK3 2130NS 21x30 530x760 9 4.1 2136Br 2136Nc 2136NK3 2136NS 21x36 530x914 11 5.0 2142Br 2142Nc 2142NK3 2142NS 21x42 530x1066 12 5.4 2148Br 2148Nc 2148NK3 2148NS 21x48 530x1219 14 6.4 2154Br 2154Nc 2154NK3 2154NS 21x54 530x1370 16 7.3 2160Br 2160Nc 2160NK3 2160NS 21x60 530x1524 18 8.2 2172Br 2172Nc 2172NK3 2172NS 21x72 530x1829 24 10.9 2424Br 2424Nc 2424NK3 2424NS 24x24 610x610 9 4.1 2430Br 2430Nc 2430NK3 2430NS 24x30 610x760 11 5.0 2436Br 2436Nc 2436NK3 2436NS 24x36 610x914 13 5.9 2442Br 2442Nc 2442NK3 2442NS 24x42 610x1066 15 6.8 2448Br 2448Nc 2448NK3 2448NS 24x48 610x1219 16 7.3 2454Br 2454Nc 2454NK3 2454NS 24x54 610x1370 19 8.6 2460Br 2460Nc 2460NK3 2460NS 24x60 610x1524 21 9.5 2472Br 2472Nc 2472NK3 2472NS 24x72 610x1829 26 11.8

Note: 14” (355mm) deep units.Free-standing units: Foot plates should be used and secured to the floor.Mobile units: maximum allowable post height is 54” (1370mm).




WirE SHELviNg

SiteSelect™ PostsStationary PostsStationary posts are equipped with a leveling bolt to account for uneven floors.

• Height includes leveling bolt (completely tightened) and post cap Leveling bolt can be adjusted 1/2" (13mm).

• Foot plates may be ordered separately and installed in place of leveling foot.

• replacement leveling bolts Zinc cat. No. rPF04-004 Stainless Steel cat. No. rPF04-004c

• replacement post cap for standard posts Black cat. No. rPc06-035

Model No. Approx. Model No. Metroseal 3 Model No. Height Pkd. Wt. chrome with Microban Stainless Steel (in.) (mm) (lbs.) (kg)

7P 73/8 187 1/2 0.3 13P 13PK3 13PS 143/8 365 1 0.5 27P 27PS 283/8 720 13/4 0.75 33P 33PK3 33PS 343/8 873 2 0.9 54P 54PK3 54PS 547/16 1382 3 1.4 63P 63PK3 63PS 627/16 1585 31/2 1.6 74P 74PK3 74PS 741/2 1892 4 1.8 86P 86PK3 86PS 861/2 2197 5 2.3 *96P 961/2 2450 51/2 2.5

*96P should not be used on units less than 24" (610mm) deep. consult Metro Engineering for alternate recommendations.

Mobile Posts (For use with Stem casters)• Height includes post cap. Model No. Approx. Model No. Metroseal 3 Model No. Height Pkd. Wt. chrome with Microban Stainless Steel (in.) (mm) (lbs.) (kg)

27UP 27UPS 273/4 704 13/4 0.75 33UP 33UPK3 33UPS 333/4 857 2 0.9 54UP 54UPK3 54UPS 5313/16 1366 3 1.4 63UP 63UPK3 63UPS 6113/16 1570 31/2 1.6 70UPK3 693/4 1771 33/4 1.7 74UP 74UPK3 74UPS 737/8 1876 4 1.8 86UP 86UPK3 86UPS 857/8 2181 41/2 2.0

Staked Posts (For use with Truck Dollies)• Each post connects to the truck dolly through the stem receptacle. The

stem receptacle is staked into the bottom of the post to ensure a durable connection in abusive mobile applications.

• Each includes a leveling/connecting bolt. Approx. Model No. Model No. Height Pkd. Wt. chrome Stainless Steel (in.) (mm) (lbs.) (kg)

54P-STKD 54PS-STKD 547/16 1382 3 1.4 63P-STKD 63PS-STKD 627/16 1585 31/2 1.6 74P-STKD 74PS-STKD 741/2 1892 4 1.8

Swedged Posts (For use with Stem casters in cart Wash Applications)• Each post has an aluminum cap swedged into the top of the post. Approx. Model No. Height Pkd. Wt. Stainless Steel (in.) (mm) (lbs.) (kg)

33UPS-SW 333/4 857 2 0.9 54UPS-SW 5313/16 1366 3 1.4 63UPS-SW 6113/16 1570 31/2 1.6

SiteSelect Posts feature double grooves every 8" (203mm) to aid assembly.

Special Length PostsSpecial length cut posts are available. consult your Metro representative for more information.




WirE SHELviNg

Wir

e S

helv

ing

10

.01

L02-006 Printed in U.S.A. rev. 11/08

information and specifications are subject to change without notice. Please confirm at time of order.

copyright © 2008 interMetro industries corp.

Super Wide Shelving• High-density Storage: Super Wide™ shelves have a greater storage

area for holding large quantities of supplies, especially large, bulky objects, providing maximum storage in minimum space.

• Load Capacity (evenly distributed) per shelf: Depths: 30" and 36" (760 and 914mm)

600 lbs. (272kg) for lengths 48" (1219mm) or shorter.

400 lbs. (181kg) for lengths 54" (1370mm) or longer. Model No. Approx. Model No. Metroseal 3 Model No. Nominal Width/Length Pkd. Wt. chrome with Microban Stainless Steel (in.) (mm) (lbs.) (kg)

3036Nc 3036NK3 3036NS 30x36 760x914 15 6.8 3048Nc 3048NK3 3048NS 30x48 760x1219 21 9.5 3060Nc 3060NK3 3060NS 30x60 760x1524 261/2 11.8 3072Nc 3072NK3 3072NS 30x72 760x1829 31 14.0 3636Nc 3636NK3 3636NS 36x36 910x914 18 8.2 3648Nc 3648NK3 3648NS 36x48 910x1219 23 10.4 3660Nc 3660NK3 3660NS 36x60 910x1524 29 13.1 3672Nc 3672NK3 3672NS 36x72 910x1829 341/2 15.4

Foot Plates• Use to bolt units to the floor, or when a broader, more stable foot is desired. Foot plates

also help to protect floors by distributing the point load of the shelving unit across a larger contact point.

• Foot plates (completely tightened) add 1/8" (3mm) to the specified heights of each stationary post on the table. Zinc cat. No. 9993Z Stainless Steel cat. No. 9993S

“S’’ Hook• Used to add on shelving units with only two posts required. order two per shelf level.

cat. No. 9995Z

Job ________________________________________________Job ________________________________________________

InterMetro Industries CorporationNorth Washington Street, Wilkes-Barre, PA 18705 Phone: 570-825-2741 Fax: 570-825-2852

All Metro Catalog Sheets are available on our Web Site: www.metro.com

For Product information:U.S. and canada: 1.800.433.2232

Latin America: 1.561.333.3824 Europe: +31.76.587.7550

Asia/Pacific: +65.6567.8003 Middle East/Africa: +971.4.811.8286

10.0

1Metro 2142NK3 Item #02.1


02/18/2018Submittal SheetITEM# 02.2 ‐ WIRE SHELVING (8 EA REQ'D)Metro 2148NK3Super Erecta® Shelf, wire, 48"W x 21"D, plastic split sleeves are included in each carton, Metroseal 3™ epoxy‐coatedcorrosion‐resistant finish with Microban® antimicrobial protection, NSFThe spec sheet for this item can be viewed on item 02.1)ACCESSORIES

Mfr Qty Model Spec





02/18/2018Submittal SheetITEM# 02.3 ‐ WIRE SHELVING (28 EA REQ'D)Metro 2160NK3Super Erecta® Shelf, wire, 60"W x 21"D, plastic split sleeves are included in each carton, Metroseal 3™ epoxy‐coatedcorrosion‐resistant finish with Microban® antimicrobial protection, NSFThe spec sheet for this item can be viewed on item 02.1)ACCESSORIES

Mfr Qty Model Spec





Documents

W }i Wpurchasing.gcsnc.com/RFQAttachments/ErwinESWalkincooler...Sporlan TXV, LLSV,T-stat 1 SmartVap AD with Sporlan TXV + Solvlv Danfoss TXV, LLSV, T-stat EEV Kit - Sporlan EEV + Kelvin