Weekly Training Report2

Telkomsel IN Daily Report(template) 内部公开

04/08/2023 华为机密，未经许可不得扩散第1页，共22页

TELKOM IMS Training Report

Report Date 24 October 2011 Issue Date

Operatort Name: PT.Telekomunikasi Indonesia Tbk leader

CN Team

training material

Subject

No. material description

1.1 precondition before service provisioning in ATS9900

1.2 2 ways to subscribe ATS service

1.3 service provisioning

1.4 some example for service provisioning

1.5 practice

2.1 contents

2.2 Huawei USC solution to facilitate all the network (mobile, fixed) into one back end

- Wilfan- Zukhri supriyono- Zulaikah- Rendy- Hari lo

5th day1. ATS9900 service provisioning2. HSS9820 Product Introduction

1.create IMS user in HSS2.add callsrc, ldnset, number analysis data in ATS OMU client

1.via web portal2.via subscription code by terminal

1. 3rd party register (from S-CDCF go to ATS)2.subscription update (from SPG to ATS)

1.Call forwarding2.CLIP3.Multi ringing services4. do not distrurb

practice on register via UE and via SPG for some suplementary services such as call forward, CLIP, CLIR,etc

1.Product orientation2.Interfaces3.Function and features4.System structure5. Technical specification6.Diameter messages



2.3 interfaces and protocols

2.4 Function and Features

2.5 multiple authentication procedure in HSS

interfaces and protocols from HSS to S/I/P-S-CSCF,SLF to I/S-CSCF,SLF-AS,HSS toAS,SPG,OMU,GGSN,IM-SSF,HLR

Functions1.data management2.registration management3.Roaming restriction4.authentication5.route query6.subscriber definition

1. IMS AKA2. Early IMS3. HTTP digest4. SIP digest5.Early AKA6. NASS Bundled7. Cave AKA




24 October 2011

kongzhigang

training material

Subject

description time

9.00-13.00

14.00-18.00

to facilitate all the network (mobile, fixed) into one back end

1.create IMS user in HSS2.add callsrc, ldnset, number analysis data in ATS OMU client

2.via subscription code by terminal

1. 3rd party register (from S-CDCF go to ATS)2.subscription update (from SPG to ATS)

3.Multi ringing services

practice on register via UE and via SPG for some suplementary services such as call forward, CLIP, CLIR,etc

1.Product orientation

3.Function and features4.System structure5. Technical specification6.Diameter messages



14.00-18.00

interfaces and protocols from HSS to S/I/P-S-CSCF,SLF to I/S-CSCF,SLF-AS,HSS toAS,SPG,OMU,GGSN,IM-SSF,HLR

1.data management2.registration management3.Roaming restriction

6.subscriber definition






CN Team

training material

Subject


1.1 HSS9820 Hardware Data Verification

- Hari Lo- Zukhri supriyono- Zulaikah- Rendy- Wilvan

7th day1. HSS9820 Data Configuration2. Practical of HSS98203. IMS Subscription Data Provisioning ISSUE5.00

1.Hardware Configuration (device number,subrack number,rack number)2. Hardware Configuration Command Navigation



1.2 HSS9820 Local Data Configuration

1.3 hSS9820 Interconnection Data Configuration

2.1 Practical

1.Basic Concept (ME,Process,IP add Distribution,FE Plug Package,Cluster,Node,configuration step)2. Configuration FE Local Data (FE Configuration flow) a. ADD ME b. ADD HSS c. ADD MODULE d. ADD ADDR e. SET LOCATION f. ADD SLF g. ADD SLF ROUTE h. ADD MODULe i. ADD ADDR3. Configure BE Local Data a. ADD ME b. SET LOCATION c. ADD MODULE d. ADD IPADDR e. LOD FEPLUG f. ADD CLUSTER g. ADD NODE h. ADD FEPLUG i. Verification4. Configure Connection Data Between FE and BE.

1. Protocols and Reference Interfaces.2. Interface and Link3. Commands for HSS/SLF Connection a.ADD HICSCF b.ADD HICSCFL c. ADD HSCSCF d.ADD HSCSCFL e.ADD HAS f. ADD HASL g.ADD HGGSN h.ADD HGGSNL i.ADD SLFICSCF j.ADD SLFICSCFL k.ADD SLFAS l. ADD SLFASL

1. HSS9820 BE – USCDB Configuration Management2. HSS9820 FE – HSS Configuration Management3. HSS9820 FE and BE interconnection Data Configuration4. HSS9820-FE and other ME interconnection Data 5. HSS9820-BE and SPG interconnection Data Configuration



3.1 Basic Concepts of IMS Subscription

3.2 SPG Introduction 1. The Relation Between SPG and HSS System

3.3 PGW Web LMT

3.4 Subscription Provisioning

3.2 Interfaces

3.3 Function and Features

1. Basic Concepts2. Functional Structure of The Subscriber Management System3. Portal Client and PGW Client4. IMS Subscription Data Structure5. SID6. IMPI and IMPU7. Public Identification8. iFC9. Service Profile

1. Web LMT Introduction2. Logging in Web LMT

1. Subscription Provisioning List2. HTTP Digest Authentiication3. Authentication Procedure HTTP Digest4. Configuration Steps5. Authentication Information Configuration6. Association Among the IMS Subscriber Identifiers7. Association Among the Early IMS Subscriber Identifiers8. Adding a New IMS Subscription9. Adding a New IMPI for an Existed SUBID10. Adding a New IMPI for an Existed IMPI11. Implicit Register Set12. Set Charging Information13. Setting Barring State of an IMPU14. Set Register Authority of an IMPU15. Set The Roaming Authority16. Set Subscription Media ID for an IMPU17.Set iFC an IMPI/IMPU18. Set the Sharing of a Service Profile

1. CGP Interfaces2. Northbound Interface3. Function of the Northbound Interface

1. CGP Function ( Manageing of Configuration, Performance, security, Log, signaling, and Fault)2. MML Command Saving3. FTTPS Function




25 October 2011

kongzhigang

training material

Subject

description time

9.00-12.45

1.Hardware Configuration (device number,subrack number,rack

2. Hardware Configuration Command Navigation



9.00-12.45

13.50-15.10

1.Basic Concept (ME,Process,IP add Distribution,FE Plug Package,Cluster,Node,configuration step)2. Configuration FE Local Data (FE Configuration flow)

g. ADD SLF ROUTE

3. Configure BE Local Data

4. Configure Connection Data Between FE and BE.

1. Protocols and Reference Interfaces.2. Interface and Link3. Commands for HSS/SLF Connection

j.ADD SLFICSCFL

1. HSS9820 BE – USCDB Configuration Management2. HSS9820 FE – HSS Configuration Management3. HSS9820 FE and BE interconnection Data Configuration4. HSS9820-FE and other ME interconnection Data 5. HSS9820-BE and SPG interconnection Data Configuration



14.30-17.00

1. The Relation Between SPG and HSS System

2. Functional Structure of The Subscriber Management System3. Portal Client and PGW Client4. IMS Subscription Data Structure

7. Public Identification

1. Web LMT Introduction2. Logging in Web LMT

1. Subscription Provisioning List2. HTTP Digest Authentiication3. Authentication Procedure HTTP Digest4. Configuration Steps5. Authentication Information Configuration6. Association Among the IMS Subscriber Identifiers7. Association Among the Early IMS Subscriber Identifiers8. Adding a New IMS Subscription9. Adding a New IMPI for an Existed SUBID10. Adding a New IMPI for an Existed IMPI11. Implicit Register Set12. Set Charging Information13. Setting Barring State of an IMPU14. Set Register Authority of an IMPU15. Set The Roaming Authority16. Set Subscription Media ID for an IMPU17.Set iFC an IMPI/IMPU18. Set the Sharing of a Service Profile

2. Northbound Interface3. Function of the Northbound Interface

1. CGP Function ( Manageing of Configuration, Performance, security, Log, signaling, and Fault)2. MML Command Saving






CN Team

Training Material

Subject


1.1 Practical HSS and ATS subscription data configuration

2.1 ENS Networking

2.2 ENS Function

2.3 ENS application in the IMS

3.1 Architecture of the ENS user data mangement system

- Wilfan- Zukhri- Zulaikah- Rendy- Hari lo

8th day1. IMS subcription data provissioning.2. ENS product introdution.3. ENS service data configuration and service provissioning.

Practical about:1. HSS subscription data - subscribtion configurationADD HHDAINFADD HTPLSUBADD HTPLIMPUSET HIRSSET HCHARGIDSET HSPSHARESET HALIASPU2. ATS subscription data - template configurationADD SBR

Learning about ENS interworking:1. ENS - PCSCF2. ENS - SCSCF3. ENS - ICSCF4. ENS - HSS

Learning ENS function in detail:1. Query ENUM2. Query DNS

Learning about:1. Working process of DNS and ENUM from IMS to IMS.

Learning about the architecture if the ENS such as: SPU, USCDB, PGW.



3.2 ENS service data configuration

3.3 ENS sevice data configuration practical

Learn about ENS service data configuration such as:1. Zone managemanet (ADD DZONE)2. Resource record management (ADD DDNSREC, ADD DSRVREC, ADD DNAPTRREC)3. Root DNS record management4. View IP resource record management (ADD DNSREC, ADD DVIEWIP).

Make data configuration for:1. ENS back end - USCDB configuration management (ADD BRD, LOD FEPLUG, ADD MODULE, ADD IPADDR, ADD CLUSTER, ADD NODE, ACT FEPLUG, SET SYSHLRSN).2. ENS front end - ENS configuration management (ADD ME, SET LOCATION, ADD MODULE, ADD ADDR)3. ENS front end - back end interconnection data configuration (ADD RLOCATION, ADD RDSG, ADD RIPADDR, ACT IPDISP, FMT)




27 October 2011

Kong Zhigang

Training Material

Subject

description time

9.00-13.00

1. HSS subscription data - subscribtion configuration

2. ATS subscription data - template configuration

Learning about ENS interworking:

Learning ENS function in detail:

1. Working process of DNS and ENUM from IMS to IMS.

Learning about the architecture if the ENS such as: SPU, USCDB,



14.00-18.00

Learn about ENS service data configuration such as:1. Zone managemanet (ADD DZONE)2. Resource record management (ADD DDNSREC, ADD DSRVREC,

3. Root DNS record management4. View IP resource record management (ADD DNSREC, ADD

Make data configuration for:1. ENS back end - USCDB configuration management (ADD BRD, LOD FEPLUG, ADD MODULE, ADD IPADDR, ADD CLUSTER, ADD NODE, ACT FEPLUG, SET SYSHLRSN).2. ENS front end - ENS configuration management (ADD ME, SET LOCATION, ADD MODULE, ADD ADDR)3. ENS front end - back end interconnection data configuration (ADD RLOCATION, ADD RDSG, ADD RIPADDR, ACT IPDISP, FMT)






CN Team

training material

Subject


1.1 Embedded DNS Pratical

2.1 The MRFP NE in IMS 1. Protocol of the interfaces

2.2 Key Function of MRP6600

2.3 Hardware of MRP6600

2.4 Processes of MRP6600

3.1 Overview of MRP6600 data configuration

3.2 Hardware data configuration


9rd day1. Embedded DNS practical2. MRP6600 Product Introduction3. MRP6600 Data Configuration4. iCG9815 Product Introduction5. iCG9815 Data Configuration

1.ENS BE – USCDB Configuration Management2.ENS FE – ENS Configuration Management3.ENS FE and BE interconnection Data Configuration

1. Service support2. Traditional voice services3. Audio/vidio play function4. Conference application features

1. Board type2. Panel and structure of MPF-1

1. Function architecture of MRP66002. MRP6600 software module3. Relation between module and process4. Internal signaling processing flow

1. Installation procedure2. Basic configuration3. Introduction of boards4. Overall flow

1. Hardware configuration flow2. Adding rack3. Adding subrack4. Adding an MPF-1



3.3 NE/Module and Local Data Configuration

3.4 Resource and interworking data configuration

3.5 System status maintenance

4.1 IMS charging principle

4.2 iCG9815 overview

4.3 iCG9815 system structure

5.1 Hardware data configuration

5.2 Local data configuration

5.3 Interworking data configuration

1. Basic concept of processes2. Basic concept of module groups3. Adding an ME4. Adding a module group5. Adding the SOM module

1. MRP6600 interworking data2. Configuration flow3. Principle of numbering interface4. Configuring the attributes of the IP interfaces5. Setting the gateway IP addresses6. Configuring the NRFC7. Configuring the H.248 links8. Configuring the NFS server9. Configuring codec capability10. Loading local media files

1. Board and process status checking2. Interface board status checking3. Useful commands for maintenance

1. IMS offline charging solution2. Interface and ACR/ACA/CDR3. Main charging information4. Main trigger point on session

1. Typical networking of the iCG9815 in the IMS 2. External interface3. iCG9815 function

1. Software structure2. Kernel process3. Access point process4. Original bill saving directory

1. Data configration flow2. Reference relationships between hardware data

1. Local data configuration process2. Referece relationships between data

1. The connection between CCF and IMS NE2. The configuration perr IMS NE of CCF3. Work mode between CCF and Billing System4. The configuration of Billing System




28 October 2011

kongzhigang

training material

Subject

description time

9.00-11.00

1. Protocol of the interfaces

11.00-12.00

12.00-15.30

1.ENS BE – USCDB Configuration Management2.ENS FE – ENS Configuration Management3.ENS FE and BE interconnection Data Configuration

2. Traditional voice services3. Audio/vidio play function4. Conference application features

2. Panel and structure of MPF-1

1. Function architecture of MRP66002. MRP6600 software module3. Relation between module and process4. Internal signaling processing flow

1. Installation procedure2. Basic configuration3. Introduction of boards

1. Hardware configuration flow

4. Adding an MPF-1



12.00-15.30

15.30-16.30

16.30-18.00

1. Basic concept of processes2. Basic concept of module groups

4. Adding a module group5. Adding the SOM module

1. MRP6600 interworking data2. Configuration flow3. Principle of numbering interface4. Configuring the attributes of the IP interfaces5. Setting the gateway IP addresses6. Configuring the NRFC7. Configuring the H.248 links8. Configuring the NFS server9. Configuring codec capability10. Loading local media files

1. Board and process status checking2. Interface board status checking3. Useful commands for maintenance

1. IMS offline charging solution2. Interface and ACR/ACA/CDR3. Main charging information4. Main trigger point on session

1. Typical networking of the iCG9815 in the IMS 2. External interface3. iCG9815 function

1. Software structure

3. Access point process4. Original bill saving directory

1. Data configration flow2. Reference relationships between hardware data

1. Local data configuration process2. Referece relationships between data

1. The connection between CCF and IMS NE2. The configuration perr IMS NE of CCF3. Work mode between CCF and Billing System4. The configuration of Billing System






CN Team

training material

Subject


1.1 Hardware Data Configuration

1.2 Local Data Configuration

1.3 Interworking Data Configuration

1.4 Workmode between CCF - BS

2.1 CDR Console

2.2 Debug Console

3.1 Concept of IMS Software Installation

3.2 OMU Installation flow


14th day1. iCG9815 Data Configuration2. iCG9815 Operation & Maintenance3. Installing OMU Software4. Exam5. SE2600 Product Introduction

1.ADD RACK2.ADD SUBRACK3.ADD BRD

1.ADD ME2.ADD MODULE3. ADD AP4. ADD PROCESSOR5. ADD CDRBRW6. ADD SCP7. ADD NICCONF 8. ADD ORGDATA9. ADD FINALDATA10. ADD CHANNEL11. ADD CDRCUSTOM

1. ADD PEER2.ADD PEERLINK

Use FTP protocol :1. PUSH : CCF serves as the client --> ADD BACKUP2. PULL : CCF serves as the server --> ADD USER

1. Log to CDR Console2. Manage CDR3. Manage Log

1. Manage debug message2. Manage Protocol Message3. Manage workflow message

1. Hardware Concept2. relation between ME & NE

1. Installation Preparation2. Installing OMU server3. Installing OMU Client4. Configuring OMU Data



3.3 NE Installation Flow

4 Exam

5.1 Basic Function of SBC

5.2 Basic Concept of NAT

5.3 SBC sollution for NAT transversal

5.4 SE2600 in IMS architecture

1. Load Installation package of NE2. Add Board3. Add ME4. Add NE

1. Provide NGN proxy service2. Network Security3. Perform CAC to ensure the QoS of the entire bandwidth

1. Address translation between private network & public network2. Hide the host IP address of the intranet for security

Full proxy mechanism1.signalling proxy2. media proxy

I - SBC : between core networkA - SBC : between access network & core network




31 October 2011

kongzhigang

training material

Subject

description time

09.00 - 12.00

1. PUSH : CCF serves as the client --> ADD BACKUP2. PULL : CCF serves as the server --> ADD USER

1. Log to CDR Console

1. Manage debug message2. Manage Protocol Message3. Manage workflow message

1. Hardware Concept2. relation between ME & NE

12.00 - 13.0014.00 - 15.00

1. Installation Preparation2. Installing OMU server3. Installing OMU Client4. Configuring OMU Data



15.00 - 17.00

12.00 - 13.0014.00 - 15.00

1. Load Installation package of NE

1. Provide NGN proxy service2. Network Security3. Perform CAC to ensure the QoS of the entire bandwidth

1. Address translation between private network & public network2. Hide the host IP address of the intranet for security

Full proxy mechanism

I - SBC : between core networkA - SBC : between access network & core network

Documents

Weekly Training Report2