Upload
dinhthu
View
214
Download
0
Embed Size (px)
Citation preview
Pump Your Needs.
WELCO’s easy ordering system can match the best product to the customer’s needs
新セレクトガイドPDF_英語版
STYGON 3355
XTYGON 2075
YTYGON 2275
LTYGON LFL
PPHARMED BPT
NNorprene A-60-G
FFluran F-5500-A
WW TUBE
Pump tube type
S/M/L/DS/DM
BA/FB
12/24VDC Brush motor
Brushlees motor
Gear motor type
W4 WM4
J8 J4 WI6
WT6
WM3
No fitting
N or Blank
Number of rollers
2 :2rollers
4 :4rollers
tube fitting type
❷❶ ❸ ❺ ❻ ❼ ❽❹
WPX1 P PS 2 W4 C1/8Series name Tube Size Option
Select the part number according to the following guide
WELCO Peristaltic pumps use a custom ordering systemthat enables part types and sizes to be selected according to the desired application.
Selection method for customization of pumps
Rotor Assembly
Pump tube
Cap
Gear Motors
Base
Example
CM/CL
Stepper motor
Tube t ype Product Descrip tion
❷
TYGON 33553350S
TYGON 2075
X
TYGON 2275
Y
TYGON LFL
L
PHARMED BPT
P
Norprene A-60-G
N
Fluran F-5500-A
F
W Tube
W
WPX1 P 21/8
“Long service life silicon tubes” with excellent interior flatness
Meets USP Class VI, FDA, 3-A and NSF 51 criteria
“Chemical-resistant tubes” that require excellent chemical resistance, transparency, and flexibility
Meets USP Class VI
“Chemical manufacturing and bio-tubes” with long service life and excellent acid and alkali resistance Meets USP Class VI, FDA, 3-A and NSF 51 criteria
“Industrial tubes” with excellent weather resistance for a wide range of applications
“High purity tubes” suitable for sending easily-changeable liquids
Meets USP Class VI, FDA, 3-A and NSF 51 criteria
“High durability tubes” with excellent wear resistance
Meets USP Class VI, FDA, 3-A
“Fluorine tubes” that are resistant to corrosive chemicals, oils, and fuels, etc.
Note: TYGON, Pharmed, Norprene and Fluran are manufactured by Saint-Gobain Group.
Pump tube type: Material (Selectable according to fluid type)
Pump tube type: Tube size (inner diameter) (Selectable according to the tube material and number of rollers)❸Model name (inner diameter)
Inner diameter
Available tube material
Number of rollers
1/161.6mm (1/16”)
P
2 / 4
3/322.4mm (3/32”)
S / P
2 / 4
1/83.2mm (1/8”)
All type (of)
2 / 4
3/164.8mm (3/16”)
X,Y Not suitable
2 / 4
Inside diameter of tube (inches)
Number of rollers
WPX1 Flow amount (mL)
2
0.17
1.6mm (1/16”)
Flow amount benchmark (flow amount per rotation)
4
0.15
2
0.35
4
0.3
2
0.6
4
0.5
2
1.2
4
0.9
2.4mm (3/32”) 3.2mm (1/8”) 4.8mm (3/16”)
“Dual wall tubes” that are resistant to chemicals and high temperature
Inner layers : Polyolefin Outer layers : Themosetting Elastomers
Caution: Tube type F4.8 cannot be used with four rollers due to its high hardness.
Caution: The above table describes the initial benchmark flow amounts during water suction. This may vary considerably depending on the tube type, use period, ambient temperature, and lot tolerances, etc. Measure the specifications with reasonable leeway.
WPX1 P DS 21/8
WPX1 - □□MWPX1 - □□L WPX1 - □□DMWPX1 - □□DS
WPX1 - □□S
46
49 40
25 46
49 40
25 7178
Gear motor types
0
50
100
150
200
24222018161412108640
50
100
150
200
250
24222018161412108640
5
10
15
20
2422201816141210864
S type M type L type
0
50
100
150
200
121110987654320
5
10
15
20
12111098765432
DS type DM type
❹
DC Brush Motor & Gear
12VDC Brush Motor & Gear: Two types are selectable (low and medium speeds)
24VDC Brush Motor & Gear: Three types are selectable (low, medium and high speeds)
DC(-)
DC(+)2.8
0.4
■Cutting hole dimensions
Num
ber
of r
otat
ions
(rp
m)
Num
ber
of r
otat
ions
(rp
m)
Recommended motorvoltage 4V to 24V
Consumption current 200mA max
Recommended motorvoltage 3V to 12V
Consumption current 300mA max
Recommended motorvoltage 6V to 12V
Consumption current 600mA max
Recommended motorvoltage 8V to 24V
Consumption current 300mA max
Recommended motorvoltage 8V to 24V
Consumption current 450mA max
Voltage (V) Voltage (V)
Voltage (V) Voltage (V)
Voltage (V)
Dimensions (unit:mm)
(unit:mm)
Weight: 132g Weight: 124g
Panel thickness: 1.0 to 1.2mm Panel thickness: 1.0 to 1.2mm
Panel thickness: 1.0 to 1.2mm
Motor wiring and terminal dimensions diagrams
red mark
Caution: The consumption current described above is the value during normal operations.An approximately threefold inrush current occurs during rotation startup.
4-R9
44.0 +0.1-0
44.0 +0.1-0
WPX1 P CM 21/8
WPX1 - □□CM
46
49 40
25 87
■Cutting hole dimensions
Dimensions (unit:mm)
Weight: 230gPanel thickness: 1.0 to 1.2mm
Geared motor model
Configuration
Operation Voltage
Current
Pump Rev.
Rotatory direction
Motor operatingtemperature
Motor lock protection
Life
CM type
Brushless motor & 1:64 Gear head
DC16V~DC24V
Less than 400mA
Approx. 47~70rpm at DC16~24V(100mNm Load)
CW
less than 70℃
2sec TYP
5,000hr (Geared motor) ※Not a guaranteed value.
■Motor wiring terminal dimensions diagrams
240±10
DC24V
GND
Red
Black
AWG24
※1
※1.Caution: The consumption current described above is the value during normal operations. An approximately threefold inrush current occurs during rotation startup.
DC Brushless Motor & Gear
Circuit protectionThis motor is not equipped with a circuit for protection against overvoltage and connection to terminals at the incorrect polarity. Be careful not to apply surge voltages that exceed the rated voltage and not to connect to the incorrect polarity.
This motor is equipped with an IC inside its casing. When the drive IC reaches a predefined temperature,the motor power is shutdown automatically. There is no guarantee that a power motor having been shutdown due to temperature will be reusable.
If the motor locks up, the motor power will be shutdown within a predefined time. The motor will restart upon power-up.
Gear motor Specification
GND
4-R9
44.0 +0.1-0
44.0 +0.1-0
WPX1 P FB 21/8
MOLEX:53048-061016 HSG:51021-0600
PIN:50079-8000
MOLEX:53048-061016 HSG:51021-0600
PIN:50079-8000
(45)40
□35
□35
WP1000 - □□FB
WPX1 - □□FA
46
49
46
49
25 70
(45)40
25 63
Dimensions (unit:mm)
Weight: 200g
Weight: 210g
Panel thickness: 1.0 to 1.2mm
Panel thickness: 1.0 to 1.2mm
Connector
Connector
Stepper Motor & GearTwo types of stepper motors can be selected according to the application and the product series
Geared motor model
Configuration
Number of phases and motor type
Rated Voltage
Rated Current
Step Angle
RPM
Duty Ratio
Winding Resistance
Inductance
Motor Insulation Class
Motor operating temperature
Life
FB type
Hybrid stepper motor &1:64 Gear ratio
0.0140625°(Half step)
0 to 20rpm
FA type
Hybrid stepper motor &1:8 Gear ratio
0.1125°(Half step)
20 to 150rpm
2 phase / BI polar system
1.92V
0.8A/Phase
Max. 50%
2.4Ω±10%
2.5mH
B
less than 80℃
5,000hr (Geared motor) ※Not a guaranteed value.
Gear motor Specification
■Cutting hole dimensions
Panel thickness: 1.0 to 1.2mm
4
1
A
A
BB
6
3
Motor
⑥5④③2①
■BI POLAR Winding Diagram
4-R9
44.0 +0.1-0
44.0 +0.1-0
Tube fitting type: Varied lineup that is selectable according to requirements ❻WPX1 P DS 2 W41/8
W4
1/8”(3.2mm), 3/16”(4.8mm)
WM3
WI6
WT6
● Available Pump tube sizes & Punp siries
● Connectable hose sizes ( OD )
Fitting consists of compression nut, sleeve and insert. Supports various hose hardnesses.
1/4”(6.4mm) or 6mm
1/16”(1.6mm), 3/32”(2.4mm),1/8”(3.2mm)
● Available Pump tube sizes & Punp siries
● Connectable hose sizes ( OD )
Fitting consists of compression nut and sleeve. Supports various hose hardnessesNut and sleeve will vary according to hose size.
3mm
WM4
1/16”(1.6mm), 3/32”(2.4mm),1/8”(3.2mm)
● Available Pump tube sizes & Punp siries
● Connectable hose sizes ( OD )
Fitting consists of compression nut and sleeve. Supports various hose hardnessesNut and sleeve will vary according to hose size.
4mm
J8
1/16”(1.6mm), 3/32”(2.4mm),1/8”(3.2mm)
● Available Pump tube sizes & Punp siries
● Connectable hose sizes ( OD )
Nut and sleeve are integrated. Excellent workability. Suitable for polyethylene, nylon and other plastic hoses.
1/8”(3.2mm) (Nylon or Polyethylene)
J4
1/8”(3.2mm), 3/16”(4.8mm)
● Available Pump tube sizes & Punp siries
● Connectable hose sizes ( OD )
Nut and sleeve are integrated. Excellent workability. Suitable for polyethylene, nylon and other plastic hoses.
Barbed type. Inserted directly into hose and used.
1/4”(6.4mm) (Nylon or Polyethylene)
1/8”(3.2mm), 3/16”(4.8mm)
● Available Pump tube sizes & Punp siries
● Connectable hose sizes ( OD )
Nut and sleeve are integrated. Excellent workability. Suitable for polyethylene, nylon and other plastic hoses.
6mm (Nylon or Polyethylene)
1/8”(3.2mm), 3/16”(4.8mm)
● Available Pump tube sizes & Punp siries
● Connectable hose sizes ( OD )
6mm ( Note: ID size )
N or Blank
No fitting. For the case in which a customer connects their own original fitting, or when using a special length pump tube.Note: If the pump tube has a large diameter, the flow rate tolerance should be increased.
1/16”(1.6mm), 3/32”(2.4mm),1/8”(3.2mm), 3/16”(4.8mm)
● Available Pump tube sizes & Punp siries
● Connectable hose sizes ( OD )
N/A
Color variationA 5-color lineup that can be classified for use according to the type of liquids used
❼
Using an optional panelThere is also a lineup of panels to which the pump can be easily mounted
❽
WPX1 P PDS 2 W4 B1/8
N or Blank = without bracketP = with bracket
110502
General specificationsRecommended installation height
Liquid temperature range
Specified environment temperature range
Specified ambient humidity range
2.0m max
5 to 50°C (41°F to 122°F)
0 to 50°C (32°F to 122°F)
20% to 80% (with no condensation)
■Option bracket dimensions
Thickness: 1.2Material properties: SUS304
Precautions
1. When selecting a tube, the customer should perform a verification test to verify the chemical suitability according to the usage environment and
the intended application.
2. Regardless of the pump tube type, the phenomenon of peeling from inside of the tube starts with small amounts.
3. This product was not designed for medical use. Do not use for medical applications.
4. This product is not waterproof. If using in water-filled environments, design to protect against water.
5. Numerical data listed in this catalog reflect conditions measured over short periods of time. Their accuracy for long-term use is not assured.
6. There is a tendency for the flow rate to increase until the tube becomes acclimated, and even among the same model,
different lots may have different flow rates within the specified tolerances. Also, the rotating speed of the DC motor may fluctuate
depending on the load conditions and changes in the motor temperature. During the design stage, be sure to select a motor with ample capacity.
http://www.welco.net
WELCO Co., Ltd.
Please see the web site to get more detailed information.
3-3-1 Sumiyoshi-cho, Fuchu-shi, Tokyo 183-0034, Japan Tel: +81-(0)42-333-7312 Fax: +81-(0)42-333-7313 welco
UL (E209254)CE (EN55011 Class B Gr.1/EN61000-6-2)NSF (pump tube type : S/X/Y/L/P/N/F)RoHS
Certifications
&
Approvals
WPX1 P DS 2 W4 B1/8
B:Blue G:Green C:Clear R:Red Y:Yellow UV:Black
80
80 60
60
4-φ5
※There is also a lineup of panels to which the pump can be easily mounted
(Special order item)