Upload
riadh-fantar
View
223
Download
0
Embed Size (px)
Citation preview
7/27/2019 Whooperswan i e a4
1/7
Whooper Swan(Cygnus cygnus)
The whooper swan is a large type of waterfowl, whose adults reach lengths of up to 140cm, with wings aslong as 60cm each. While their bodies are predominantly white, some feature yellowish markings on the headand neck. There are no color differences distinguishing males and females, but cygnets younger than one yearold are gray with brownish streaks, the area around the top of the beak a pinkish white. Also, adults can weigh
more than 10kg, which is quite heavy for a flying animal. Take-off requires the assistance of a run-up.Whooper swans feed mostly on the stems and roots of aquatic plants, and their main breeding ground isnorthen Eurasia, Iceland, etc.
This papercraft is about one half the size of a real whooper swan.
- 1 -
Notation KeyAssembly Instructions
Tools
Caution
1) Carefully cut out the parts.
2) Make mountain folds and valley folds along the dotted lines,as indicated by the directions.
3) Assemble the parts in the order shown by the numbers on the glue tabs.(Read the assembly instruction for more information.)
4) Attach the parts in order.(Read the assembly instruction for more information.)
5) Your Paper craft model is finished.
Scissors, glue (We recommend craft glue.)
Glue, scissors and other tools may be dangerous to young childrenso be sure to keep them out of the reach of young children.
Glue spot
Scissors line
Valley fold
Mountain fold
Cut in line
Glue up to this line
Whooper Swan : Assembly Instructions
7/27/2019 Whooperswan i e a4
2/7
Make it so that the parts indicated bythe arrows are concave, when viewed from the front.
*Make one at a time.1
1
55
6
6
1 4
5 6
3
3
4
Completed head
Assemble the head
- 2 -
Assemble , , and .2 3 41
5 6 1 2 3 4
Attach to and first.1
5
3
Assemble ( ) , and attach them to the face , , and .
The photo shows part .
2
Fold inside and glue down.
Whooper Swan : Assembly Instructions
7/27/2019 Whooperswan i e a4
3/7
Assemble the neck
7
7
8
9
10
8
9
10
11
12
Attach them together one by one.
Arrange the glue spots of each part.
Attach them together one by one.
11
12
Assemble , , and .
25
26
- 3 -
Assemble , , , and .8 9 10 277
11 12 25 26
Arrange theglue spotsof each part.
Head 5
Head 6
Curl into a cylinder,and glue it inside the neck part of .
27
5
27
25 26
6
Curl and into cylinders and attach them together.Then insert them inside the neck part of .*Do not glue.
Whooper Swan : Assembly Instructions
7/27/2019 Whooperswan i e a4
4/7
Roll the parts on the edge ofthe desk to give them a natural curve.
- 4 -
Assemble the body
Assemble and , and make the neck joint.1413
Assemble , and make the front part of the body.15
16 17 18 19 15
Either or can be on top.17 19
Attach and , and , add curves to the part, and attach to .
13 1314
14
15
14
17 19
18
16
15
16
1817
19
Whooper Swan : Assembly Instructions
7/27/2019 Whooperswan i e a4
5/7
Attach to and to ,and attach them to .
- 5 -
Assemble the body
Assemble and , and attach them together.2120
Assemble and , and attach them to and .2322 2120
Align the center of the glue tabson with the edge of / .22 20 21
Align the center ofand the edge of /with the triangle marks.
15
20 21
20 2021 21
20
22
22
2223
23
21
24
15 19
20 23
2015
21
15 19 20 23 24
Whooper Swan : Assembly Instructions
7/27/2019 Whooperswan i e a4
6/7
15 2413
23
14
30 31
33
28
29
2928
3130
32
32
- 6 -
Attach and to the part made with parts to , insert the neck and your adult whooper swans are complete.14 15 2413
Insert either of the heads into the body.You can swap heads later as you please.*Do not glue.
Insert / (the head).*Do not glue.
28 29
Attach parts to together to make the cygnets.3328
Completion of the adults whooper swans/Assembly of cygnetsWhooper Swan : Assembly Instructions
7/27/2019 Whooperswan i e a4
7/7
Your whooper swan family is now complete!
Arrange the adults and cygnets on the base to your liking.
You can arrange the two adult swans as a couple,facing each other so that their necks form a heart shape.
34 35 36 37
34
35
36
37
38
39
- 7 -
Assemble the base and complete
Glue parts to together as shown.34
38 39
37
Assemble and , and assemble the nameplate.
Assemble to to make the base.3734
Both swans' heads can be turned and posed as you like.Why not make two adults and two cygnets to makea whooper swan family?
Whooper Swan : Assembly Instructions