XIAMEN SEALS SELECTION GUIDE BOOK · 2018-11-12 · XIAMEN SEALS TECHNOLGOY served as a leading rubber component manufacturer in China, known for innovation and continuous improvement

XIAMEN SEALS SELECTION GUIDE BOOK

Your Static Seals & O-Rings Specialist

厦门希尔思密封件科技有限公司

Xiamen Seals Technology Co.,Ltd

www.sealsmanufacturer.com

XIAMEN SEALS TECHNOLGOY served as a leading rubber component manufacturer in China, known for innovation and continuous improvement. Our products have been approved for industries, automotive, semi-conductor,medical, drinking water,food & drug equipment, sanitary and various industrial grades etc.

It is our mission that motivates us to contribute efforts to the better world that XIAMEN SEALS will become a world class manufacturer with the best sealing products.

Our factory is of advanced technology and equipments, including mould tooling & plating, compound mixing, compression moulded forming, packaging machines, production equipments, inspection devices, scientific management, especially learning from Hong Kong & Taiwan experience & concepts. The factory produces qualified products in complete specification in standard such as C1976, ISO3601,JIS2401 etc. The timely delivery relys on more than 5,000 mould toolings and sufficient stock with hot selling products to all over world. It ensures positive growth for mutual benefits with better quality, excellent service & continue innovation and improvment as teamwork and strong partnership.

Welcome to join in us！

Orings & Seals application

We offer standard O-RINGS(AS568), Metric O-rings, JIS O-rings, BS O-rings, Spliced or Vulcanized O-rings, O-rings by material, Custom Molded O-rings, O-ring kits.

Our operational application temperature limits: EPDM 70: -45 °C to +130 °CFKM: -15 °C to +200 °CHNBR 70: -30 °C to +150 °CNBR: -30 °C to +100 °CVMQ 70: -55 °C to +200 °C

Types of O-ring compounds FKM (Viton®)

BUNA-N (NBR)

Hydrogenated BUNA-N ( HNBR)

Chloroprene ( Neoprene®)

EPDM

FFKM

Silicone

Flurosilicone

Natural

Aflas

More compounds


Permissible deviations for O-Ring Cross Section according to ISO 3601:2008For general industrial applications ( Standardized O-Rings)

Cross Section (mm) 1.02 1.27 1.52 1.78 2.62 3.53 5.33 6.99

Permitted Deviations ± 0.08 0.08 0.08 0.08 0.09 0.10 0.13 0.15

For general industrial applications (Not standardized O-Rings)

Cross Section (mm) 0.80 < d2 ≤ 2.25 2.25 < d2 ≤ 3.15 3.15 < d2 ≤ 4.50 4.50 < d2 ≤

6.306.30 < d2 ≤

8.40Permitted

Deviations ± 0.08 0.09 0.10 0.13 0.15

Surface and form deviations of O-rings in accordance with ISO3601:2008

Cross Section Type Dimensions

≥0.80 ≥2.25 ≥3.15 ≥4.50 ≥6.30

≤2.25 ≤3.15 ≤4.50 ≤6.30 ≤8.40

Offset and form deviation e 0.08 0.10 0.13 0.15 0.15

Combined, burr

x 0.10 0.12 0.14 0.16 0.18

y 0.10 0.12 0.14 0.16 0.18

a no more than 0.07mm

Indentationg 0.18 0.27 0.36 0.53 0.70

u 0.08 0.08 0.10 0.10 0.13

Deburring area n Deburring is allowed if the minimum diameter n isn't greater than d2

Flow lines, radial expansion not

permissible

v 1.50 1.50 6.50 6.50 6.50

k 0.08 0.08 0.08 0.08 0.08

Recesses, indentation points

w 0.60 0.80 1.00 1.30 1.70

t 0.08 0.08 0.10 0.10 0.13


Deviations Permitted for Inner Diameter of O-rings in accordance with ISO 3601-2008

Inside diameter Lower tolerance

Upper tolerance Inside diameter Lower

toleranceUpper

toleranceID(mm) mm mm ID(mm) mm mm

0.70 - 2.50 0.12 0.13 51.51 - 53.00 0.49 0.50 2.51 - 4.50 0.13 0.15 53.01 - 54.50 0.50 0.51 4.51 - 6.30 0.15 0.16 54.51 - 56.00 0.51 0.52 6.31 - 8.50 0.16 0.18 56.01 - 58.00 0.52 0.54 8.51 - 10.00 0.18 0.19 58.01 - 60.00 0.54 0.55 10.01 - 11.20 0.19 0.20 60.01 - 61.50 0.55 0.56 11.21 - 14.00 0.20 0.22 61.51 - 63.00 0.56 0.57 14.01 - 16.00 0.22 0.24 63.01 - 65.00 0.57 0.58 16.01 - 18.00 0.24 0.25 65.01 - 67.00 0.58 0.60 18.01 - 20.00 0.25 0.26 67.01 - 69.00 0.60 0.61 20.01 - 21.20 0.27 0.27 69.01 - 71.00 0.61 0.63 21.21 - 23.60 0.27 0.29 71.01 - 73.00 0.63 0.64 23.61 - 25.00 0.29 0.30 73.01 - 75.00 0.64 0.65 25.01 - 26.50 0.30 0.31 75.01 - 77.50 0.65 0.67 26.51 - 28.00 0.31 0.32 77.51 - 80.00 0.67 0.69 28.01 - 30.00 0.32 0.34 80.01 - 82.50 0.69 0.71 30.01 - 31.50 0.34 0.35 82.51 - 85.00 0.71 0.72 31.51 - 33.50 0.35 0.36 85.01 - 87.50 0.72 0.74 33.51 - 34.50 0.36 0.37 87.51 - 90.00 0.74 0.76 34.51 - 35.50 0.37 0.38 90.01 - 92.50 0.76 0.77 35.51 - 36.50 0.38 0.38 92.51 - 95.00 0.77 0.79 36.51 - 37.50 0.38 0.39 95.01 - 97.50 0.79 0.81 37.51 - 38.70 0.39 0.40 97.51 - 100.00 0.81 0.82 38.71 - 40.00 0.40 0.41 100.01 - 103.00 0.82 0.85 40.01 - 41.20 0.41 0.42 103.01 - 106.00 0.85 0.87 41.21 - 42.50 0.42 0.43 106.01 - 109.00 0.87 0.89 42.51 - 43.70 0.43 0.44 109.01 - 112.00 0.89 0.91 43.71 - 45.00 0.44 0.44 112.01 - 115.00 0.91 0.93 45.01 - 46.20 0.44 0.45 115.01 - 118.00 0.93 0.95 46.21 - 47.50 0.45 0.46 118.01 - 122.00 0.95 0.97 47.51 - 48.70 0.46 0.47 122.01 - 125.00 0.97 0.99 48.71 - 50.00 0.47 0.48 125.01 - 128.00 0.99 1.01 50.01 - 51.50 0.48 0.49 128.01 - 132.00 1.01 1.04

Inside diameter Lower tolerance

Upper tolerance Inside diameter Lower

toleranceUpper

toleranceID(mm) mm mm ID(mm) mm mm

132.01 - 136.00 1.04 1.07 345.01 - 355.00 2.43 2.49 136.01 - 140.00 1.07 1.09 355.01 - 365.00 2.49 2.56 140.01 - 145.00 1.09 1.13 365.01 - 375.00 2.56 2.62 145.01 - 150.00 1.13 1.16 375.01 - 387.00 2.62 2.70 150.01 - 155.00 1.16 1.19 387.01 - 400.00 2.70 2.78 155.01 - 160.00 1.19 1.23 400.01 - 412.00 2.78 2.85 160.01 - 165.00 1.23 1.26 412.01 - 425.00 2.85 2.94 165.01 - 170.00 1.26 1.29 425.01 - 437.00 2.94 3.01 170.01 - 175.00 1.29 1.33 437.01 - 450.00 3.01 3.09 175.01 - 180.00 1.33 1.36 450.01 - 462.00 3.09 3.17 180.01 - 185.00 1.36 1.39 462.01 - 475.00 3.17 3.25 185.01 - 190.00 1.39 1.43 475.01 - 487.00 3.25 3.33 190.01 - 195.00 1.43 1.46 487.01 - 500.00 3.33 3.41 195.01 - 200.00 1.46 1.49 500.01 - 515.00 3.41 3.50 200.01 - 206.00 1.49 1.53 515.01 - 530.00 3.50 3.60 206.01 - 212.00 1.53 1.57 530.01 - 545.00 3.60 3.69 212.01 - 218.00 1.57 1.61 545.01 - 560.00 3.69 3.78 218.01 - 224.00 1.61 1.65 560.01 - 580.00 3.78 3.91 224.01 - 230.00 1.65 1.69 580.01 - 600.00 3.91 4.03 230.01 - 236.00 1.69 1.73 600.01 - 615.00 4.03 4.12 236.01 - 243.00 1.73 1.77 615.01 - 630.00 4.12 4.22 243.01 - 250.00 1.77 1.82 630.01 - 650.00 4.22 4.34 250.01 - 258.00 1.82 1.87 650.01 - 670.00 4.34 4.47 258.01 - 265.00 1.87 1.91 671 4.47 265.01 - 272.00 1.91 1.96 700 4.65 272.01 - 280.00 1.96 2.01 750 4.96 280.01 - 290.00 2.01 2.08 800 5.26 290.01 - 300.00 2.08 2.14 850 5.57 300.01 - 307.00 2.14 2.19 900 5.87 307.01 - 315.00 2.19 2.24 1000 6.48 315.01 - 325.00 2.24 2.30 325.01 - 335.00 2.30 2.36 335.01 - 345.00 2.36 2.43

标准代码

Standard内径×线径

ID × C/S标准代码




ID × C/SAS568-001 0.74x1.02 AS568-046 107.67x1.78 AS568-142 59.99x2.62AS568-002 1.07x1.27 AS568-047 114.02x1.78 AS568-143 61.6x2.62AS568-003 1.42x1.52 AS568-048 120.37x1.78 AS568-144 63.17x2.62AS568-004 1.78x1.78 AS568-049 126.72x1.78 AS568-145 64.77x2.62AS568-005 2.57x1.78 AS568-050 133.07x1.78 AS568-146 66.34x2.62AS568-006 2.9x1.78 AS568-102 1.24x2.62 AS568-147 67.95x2.62AS568-007 3.68x1.78 AS568-103 2.06x2.62 AS568-148 69.52x2.62AS568-008 4.47x1.78 AS568-104 2.84x2.62 AS568-149 71.12x2.62AS568-009 5.28x1.78 AS568-105 3.63x2.62 AS568-150 72.69x2.62AS568-010 6.07x1.78 AS568-106 4.42x2.62 AS568-151 75.87x2.62AS568-011 7.65x1.78 AS568-107 5.23x2.62 AS568-152 82.22x2.62AS568-012 9.25x1.78 AS568-108 6.02x2.62 AS568-153 88.57x2.62AS568-013 10.82x1.78 AS568-109 7.59x2.62 AS568-154 94.92x2.62AS568-014 12.42x1.78 AS568-110 9.19x2.62 AS568-155 101.27x2.62AS568-015 14x1.78 AS568-111 10.77x2.62 AS568-156 107.62x2.62AS568-016 15.6x1.78 AS568-112 12.37x2.62 AS568-157 113.97x2.62AS568-017 17.17x1.78 AS568-113 13.94x2.62 AS568-158 120.32x2.62AS568-018 18.77x1.78 AS568-114 15.54x2.62 AS568-159 126.67x2.62AS568-019 20.35x1.78 AS568-115 17.12x2.62 AS568-160 133.02x2.62AS568-020 21.95x1.78 AS568-116 18.72x2.62 AS568-161 139.37x2.62AS568-021 23.52x1.78 AS568-117 20.29x2.62 AS568-162 145.72x2.62AS568-022 25.12x1.78 AS568-118 21.89x2.62 AS568-163 152.07x2.62AS568-023 26.7x1.78 AS568-119 23.47x2.62 AS568-164 158.42x2.62AS568-024 28.3x1.78 AS568-120 25.07x2.62 AS568-165 164.77x2.62AS568-025 29.87x1.78 AS568-121 26.64x2.62 AS568-166 171.12x2.62AS568-026 31.47x1.78 AS568-122 28.24x2.62 AS568-167 177.47x2.62AS568-027 33.05x1.78 AS568-123 29.82x2.62 AS568-168 183.82x2.62AS568-028 34.65x1.78 AS568-124 31.42x2.62 AS568-169 190.17x2.62AS568-029 37.82x1.78 AS568-125 32.99x2.62 AS568-170 196.52x2.62AS568-030 41x1.78 AS568-126 34.59x2.62 AS568-171 202.87x2.62AS568-031 44.17x1.78 AS568-127 36.17x2.62 AS568-172 209.22x2.62AS568-032 47.35x1.78 AS568-128 37.77x2.62 AS568-173 215.57x2.62AS568-033 50.52x1.78 AS568-129 39.34x2.62 AS568-174 221.92x2.62AS568-034 53.7x1.78 AS568-130 40.94x2.62 AS568-175 228.27x2.62AS568-035 56.87x1.78 AS568-131 42.52x2.62 AS568-176 234.62x2.62AS568-036 60.05x1.78 AS568-132 44.12x2.62 AS568-177 240.97x2.62AS568-037 63.22x1.78 AS568-133 45.69x2.62 AS568-178 247.32x2.62AS568-038 66.4x1.78 AS568-134 47.29x2.62 AS568-901 4.7x1.42AS568-039 69.57x1.78 AS568-135 48.9x2.62 AS568-902 6.07x1.63AS568-040 72.75x1.78 AS568-136 50.47x2.62 AS568-903 7.65x1.63AS568-041 75.92x1.78 AS568-137 52.07x2.62 AS568-904 8.92x1.83AS568-042 82.27x1.78 AS568-138 53.64x2.62 AS568-905 10.52x1.83AS568-043 88.62x1.78 AS568-139 55.25x2.62 AS568-906 11.89x1.98AS568-044 94.97x1.78 AS568-140 56.82x2.62 AS568-907 13.46x2.08AS568-045 101.32x1.78 AS568-141 58.42x2.62 AS568-908 16.36x2.21

Seals 001

标准代码






ID × C/SAS568-909 17.93x2.46 AS568-234 75.79x3.53 AS568-279 329.79x3.53AS568-910 19.18x2.46 AS568-235 78.97x3.53 AS568-280 355.19x3.53AS568-911 21.92x2.95 AS568-236 82.14x3.53 AS568-281 380.59x3.53AS568-912 23.47x2.95 AS568-237 85.32x3.53 AS568-282 405.26x3.53AS568-913 25.04x2.95 AS568-238 88.49x3.53 AS568-283 430.66x3.53AS568-914 26.59x2.95 AS568-239 91.67x3.53 AS568-284 456.06x3.53AS568-916 29.74x2.95 AS568-240 94.84x3.53 AS568-309 10.46x5.33AS568-918 34.42x2.95 AS568-241 98.02x3.53 AS568-310 12.07x5.33AS568-920 37.47x3 AS568-242 101.19x3.53 AS568-311 13.64x5.33AS568-924 43.69x3 AS568-243 104.37x3.53 AS568-312 15.24x5.33AS568-928 53.09x3 AS568-244 107.54x3.53 AS568-313 16.81x5.33AS568-932 59.36x3 AS568-245 110.72x3.53 AS568-314 18.42x5.33AS568-201 4.34x3.53 AS568-246 113.89x3.53 AS568-315 19.99x5.33AS568-202 5.94x3.53 AS568-247 117.07x3.53 AS568-316 21.59x5.33AS568-203 7.52x3.53 AS568-248 120.24x3.53 AS568-317 23.16x5.33AS568-204 9.12x3.53 AS568-249 123.42x3.53 AS568-318 24.77x5.33AS568-205 10.69x3.53 AS568-250 126.59x3.53 AS568-319 26.34x5.33AS568-206 12.29x3.53 AS568-251 129.77x3.53 AS568-320 27.94x5.33AS568-207 13.87x3.53 AS568-252 132.94x3.53 AS568-321 29.51x5.33AS568-208 15.47x3.53 AS568-253 136.12x3.53 AS568-322 31.12x5.33AS568-209 17.04x3.53 AS568-254 139.29x3.53 AS568-323 32.69x5.33AS568-210 18.64x3.53 AS568-255 142.47x3.53 AS568-324 34.29x5.33AS568-211 20.22x3.53 AS568-256 145.64x3.53 AS568-325 37.47x5.33AS568-212 21.82x3.53 AS568-257 148.82x3.53 AS568-326 40.64x5.33AS568-213 23.39x3.53 AS568-258 151.99x3.53 AS568-327 43.82x5.33AS568-214 24.99x3.53 AS568-259 158.34x3.53 AS568-328 46.99x5.33AS568-215 26.57x3.53 AS568-260 164.69x3.53 AS568-329 50.17x5.33AS568-216 28.17x3.53 AS568-261 171.04x3.53 AS568-330 53.34x5.33AS568-217 29.74x3.53 AS568-262 177.39x3.53 AS568-331 56.52x5.33AS568-218 31.34x3.53 AS568-263 183.74x3.53 AS568-332 59.69x5.33AS568-219 32.92x3.53 AS568-264 190.09x3.53 AS568-333 62.87x5.33AS568-220 34.52x3.53 AS568-265 196.44x3.53 AS568-334 66.04x5.33AS568-221 36.09x3.53 AS568-266 202.79x3.53 AS568-335 69.22x5.33AS568-222 37.69x3.53 AS568-267 209.14x3.53 AS568-336 72.39x5.33AS568-223 40.87x3.53 AS568-268 215.49x3.53 AS568-337 75.57x5.33AS568-224 44.04x3.53 AS568-269 221.84x3.53 AS568-338 78.74x5.33AS568-225 47.22x3.53 AS568-270 228.19x3.53 AS568-339 81.92x5.33AS568-226 50.39x3.53 AS568-271 234.54x3.53 AS568-340 85.09x5.33AS568-227 53.57x3.53 AS568-272 240.89x3.53 AS568-341 88.27x5.33AS568-228 56.74x3.53 AS568-273 247.24x3.53 AS568-342 91.44x5.33AS568-229 59.92x3.53 AS568-274 253.59x3.53 AS568-343 94.62x5.33AS568-230 63.09x3.53 AS568-275 266.29x3.53 AS568-344 97.79x5.33AS568-231 66.27x3.53 AS568-276 278.99x3.53 AS568-345 100.97x5.33AS568-232 69.44x3.53 AS568-277 291.69x3.53 AS568-346 104.14x5.33AS568-233 72.62x3.53 AS568-278 304.39x3.53 AS568-347 107.32x5.33

Seals 002

标准代码






ID × C/SAS568-348 110.49x5.33 AS568-393 608.08x5.33 AS568-466 468.76x6.99AS568-349 113.67x5.33 AS568-394 633.48x5.33 AS568-467 481.46x6.99AS568-350 116.84x5.33 AS568-395 658.88x5.33 AS568-468 494.16x6.99AS568-351 120.02x5.33 AS568-408 59.69x6.99 AS568-469 506.86x6.99AS568-352 123.19x5.33 AS568-425 113.67x6.99 AS568-470 532.26x6.99AS568-353 126.37x5.33 AS568-426 116.84x6.99 AS568-471 557.66x6.99AS568-354 129.54x5.33 AS568-427 120.02x6.99 AS568-472 582.68x6.99AS568-355 132.72x5.33 AS568-428 123.19x6.99 AS568-473 608.08x6.99AS568-356 135.89x5.33 AS568-429 126.37x6.99 AS568-474 633.48x6.99AS568-357 139.07x5.33 AS568-430 129.54x6.99 AS568-475 658.88x6.99AS568-358 142.24x5.33 AS568-431 132.72x6.99AS568-359 145.42x5.33 AS568-432 135.89x6.99AS568-360 148.59x5.33 AS568-433 139.07x6.99AS568-361 151.77x5.33 AS568-434 142.24x6.99AS568-362 158.12x5.33 AS568-435 145.42x6.99AS568-363 164.47x5.33 AS568-436 148.59x6.99AS568-364 170.82x5.33 AS568-437 151.77x6.99AS568-365 177.17x5.33 AS568-438 158.12x6.99AS568-366 183.52x5.33 AS568-439 164.47x6.99AS568-367 189.87x5.33 AS568-440 170.82x6.99AS568-368 196.22x5.33 AS568-441 177.17x6.99AS568-369 202.57x5.33 AS568-442 183.52x6.99AS568-370 208.92x5.33 AS568-443 189.87x6.99AS568-371 215.27x5.33 AS568-444 196.22x6.99AS568-372 221.62x5.33 AS568-445 202.57x6.99AS568-373 227.97x5.33 AS568-446 215.27x6.99AS568-374 234.32x5.33 AS568-447 227.97x6.99AS568-375 240.67x5.33 AS568-448 240.67x6.99AS568-376 247.02x5.33 AS568-449 253.37x6.99AS568-377 253.37x5.33 AS568-450 266.07x6.99AS568-378 266.07x5.33 AS568-451 278.77x6.99AS568-379 278.77x5.33 AS568-452 291.47x6.99AS568-380 291.47x5.33 AS568-453 304.17x6.99AS568-381 304.17x5.33 AS568-454 316.87x6.99AS568-382 329.57x5.33 AS568-455 329.57x6.99AS568-383 354.97x5.33 AS568-456 342.27x6.99AS568-384 380.37x5.33 AS568-457 354.97x6.99AS568-385 405.26x5.33 AS568-458 367.67x6.99AS568-386 430.66x5.33 AS568-459 380.37x6.99AS568-387 456.06x5.33 AS568-460 393.07x6.99AS568-388 481.46x5.33 AS568-461 405.26x6.99AS568-389 506.86x5.33 AS568-462 417.96x6.99AS568-390 532.26x5.33 AS568-463 430.66x6.99AS568-391 557.66x5.33 AS568-464 443.36x6.99AS568-392 582.68x5.33 AS568-465 456.06x6.99

Seals 003

标准代码






ID × C/SJIS-G100 99.4x3.1 JIS-G95 94.4x3.1 JIS-P22.4 22.1x3.5JIS-G105 104.4x3.1 JIS-P10 9.8x1.9 JIS-P220 219.5x8.4JIS-G110 109.4x3.1 JIS-P100 99.6x5.7 JIS-P225 224.5x8.4JIS-G115 114.4x3.1 JIS-P102 101.6x5.7 JIS-P22A 21.7x3.5JIS-G120 119.4x3.1 JIS-P105 104.6x5.7 JIS-P23 22.7x3.5JIS-G125 124.4x3.1 JIS-P10A 9.8x2.4 JIS-P230 229.5x8.4JIS-G130 129.4x3.1 JIS-P11 10.8x2.4 JIS-P235 234.5x8.4JIS-G135 134.4x3.1 JIS-P11.2 11x2.4 JIS-P24 23.7x3.5JIS-G140 139.4x3.1 JIS-P110 109.6x5.7 JIS-P240 239.5x8.4JIS-G145 144.4x3.1 JIS-P112 111.6x5.7 JIS-P245 244.5x8.4JIS-G150 149.3x5.7 JIS-P115 114.6x5.7 JIS-P25 24.7x3.5JIS-G155 154.3x5.7 JIS-P12 11.8x2.4 JIS-P25.5 25.2x3.5JIS-G160 159.3x5.7 JIS-P12.5 12.3x2.4 JIS-P250 249.5x8.4JIS-G165 164.3x5.7 JIS-P120 119.6x5.7 JIS-P255 254.5x8.4JIS-G170 169.3x5.7 JIS-P125 124.6x5.7 JIS-P26 25.7x3.5JIS-G175 174.3x5.7 JIS-P13 12.8x2.4 JIS-P260 259.5x8.4JIS-G180 179.3x5.7 JIS-P130 129.6x5.7 JIS-P265 264.5x8.4JIS-G185 184.3x5.7 JIS-P132 131.6x5.7 JIS-P27 26.7x3.5JIS-G190 189.3x5.7 JIS-P135 134.6x5.7 JIS-P270 269.5x8.4JIS-G195 194.3x5.7 JIS-P14 13.8x2.4 JIS-P275 274.5x8.4JIS-G200 199.3x5.7 JIS-P140 139.6x5.7 JIS-P28 27.7x3.5JIS-G210 209.3x5.7 JIS-P145 144.6x5.7 JIS-P280 279.5x8.4JIS-G220 219.3x5.7 JIS-P15 14.8x2.4 JIS-P285 284.5x8.4JIS-G230 229.3x5.7 JIS-P150 149.6x5.7 JIS-P29 28.7x3.5JIS-G240 239.3x5.7 JIS-P150A 149.5x8.4 JIS-P29.5 29.2x3.5JIS-G25 24.4x3.1 JIS-P155 154.5x8.4 JIS-P290 289.5x8.4JIS-G250 249.3x5.7 JIS-P16 15.8x2.4 JIS-P295 294.5x8.4JIS-G260 259.3x5.7 JIS-P160 159.5x8.4 JIS-P3 2.8x1.9JIS-G270 269.3x5.7 JIS-P165 164.5x8.4 JIS-P30 29.7x3.5JIS-G280 279.3x5.7 JIS-P17 16.8x2.4 JIS-P300 299.5x8.4JIS-G290 289.3x5.7 JIS-P170 169.5x8.4 JIS-P31 30.7x3.5JIS-G30 29.4x3.1 JIS-P175 174.5x8.4 JIS-P31.5 31.2x3.5JIS-G300 299.3x5.7 JIS-P18 17.8x2.4 JIS-P315 314.5x8.4JIS-G35 34.4x3.1 JIS-P180 179.5x8.4 JIS-P32 31.7x3.5JIS-G40 39.4x3.1 JIS-P185 184.5x8.4 JIS-P320 319.5x8.4JIS-G45 44.4x3.1 JIS-P190 189.5x8.4 JIS-P33 32.7x3.5JIS-G50 49.4x3.1 JIS-P195 194.5x8.4 JIS-P335 334.5x8.4JIS-G55 54.4x3.1 JIS-P20 19.8x2.4 JIS-P34 33.7x3.5JIS-G60 59.4x3.1 JIS-P200 199.5x8.4 JIS-P340 339.5x8.4JIS-G65 64.4x3.1 JIS-P205 204.5x8.4 JIS-P35 34.7x3.5JIS-G70 69.4x3.1 JIS-P209 208.5x8.4 JIS-P35.5 35.2x3.5JIS-G75 74.4x3.1 JIS-P21 20.8x2.4 JIS-P355 354.5x8.4JIS-G80 79.4x3.1 JIS-P210 209.5x8.4 JIS-P36 35.7x3.5JIS-G85 84.4x3.1 JIS-P215 214.5x8.4 JIS-P360 359.5x8.4JIS-G90 89.4x3.1 JIS-P22 21.8x2.4 JIS-P37 36.5x3.5

Seals 004

标准代码






ID × C/SJIS-P375 374.5x8.4 JIS-S115 114.5x2 JIS-S6 5.5x1.5JIS-P38 37.7x3.5 JIS-S12 11.5x1.5 JIS-S60 59.5x2JIS-P385 384.5x8.4 JIS-S12.5 12x1.5 JIS-S63 62.5x2JIS-P39 38.7x3.5 JIS-S120 119.5x2 JIS-S65 64.5x2JIS-P4 3.8x1.9 JIS-S125 124.5x2 JIS-S67 66.5x2JIS-P40 39.7x3.5 JIS-S130 129.5x2 JIS-S7 6.5x1.5JIS-P400 399.5x8.4 JIS-S132 131.5x2 JIS-S70 69.5x2JIS-P41 40.7x3.5 JIS-S135 134.5x2 JIS-S71 70.5x2JIS-P42 41.7x3.5 JIS-S14 13.5x1.5 JIS-S75 74.5x2JIS-P44 43.7x3.5 JIS-S140 139.5x2 JIS-S8 7.5x1.5JIS-P45 44.7x3.5 JIS-S145 144.5x2 JIS-S80 79.5x2JIS-P46 45.7x3.5 JIS-S15 14.5x1.5 JIS-S85 84.5x2JIS-P48 47.7x3.5 JIS-S150 149.5x2 JIS-S9 8.5x1.5

JIS-P48A 47.6x5.7 JIS-S16 15.5x1.5 JIS-S90 89.5x2JIS-P49 48.7x3.5 JIS-S18 17.5x1.5 JIS-S95 94.5x2JIS-P5 4.8x1.9 JIS-S20 19.5x1.5JIS-P50 49.7x3.5 JIS-S22 21.5x1.5

JIS-P50A 49.6x5.7 JIS-S22.4 21.9x2JIS-P52 51.6x5.7 JIS-S24 23.5x2JIS-P53 52.6x5.7 JIS-S25 24.5x2JIS-P55 54.6x5.7 JIS-S26 25.5x2JIS-P56 55.6x5.7 JIS-S28 27.5x2JIS-P58 57.6x5.7 JIS-S29 28.5x2JIS-P6 5.8x1.9 JIS-S3 2.5x1.5JIS-P60 59.6x5.7 JIS-S30 29.5x2JIS-P62 61.6x5.7 JIS-S31.5 31x2JIS-P63 62.6x5.7 JIS-S32 31.5x2JIS-P65 64.6x5.7 JIS-S34 33.5x2JIS-P67 66.6x5.7 JIS-S35 34.5x2JIS-P7 6.8x1.9 JIS-S35.5 35x2JIS-P70 69.6x5.7 JIS-S36 35.5x2JIS-P71 70.6x5.7 JIS-S38 37.5x2JIS-P75 74.6x5.7 JIS-S39 38.5x2JIS-P8 7.8x1.9 JIS-S4 3.5x1.5JIS-P80 79.6x5.7 JIS-S40 39.5x2JIS-P85 84.6x5.7 JIS-S42 41.5x2JIS-P9 8.8x1.9 JIS-S44 43.5x2JIS-P90 89.6x5.7 JIS-S45 44.5x2JIS-P95 94.6x5.7 JIS-S46 45.5x2JIS-S10 9.5x1.5 JIS-S48 47.5x2JIS-S100 99.5x2 JIS-S5 4.5x1.5JIS-S105 104.5x2 JIS-S50 49.5x2JIS-S11.2 10.7x1.5 JIS-S53 52.5x2JIS-S110 109.5x2 JIS-S55 54.5x2JIS-S112 111.5x2 JIS-S56 55.5x2

Seals 005

标准代码






ID × C/SC-1976 1.2x1 C-1976 103x6 C-1976 11.5x3C-1976 1.2x1.9 C-1976 104x3 C-1976 11.5x5C-1976 1.2x2.4 C-1976 104x4 C-1976 11.6x2.2C-1976 1.5x1 C-1976 105.2x2.4 C-1976 11.6x2.4C-1976 1.5x1.5 C-1976 105.8x3.1 C-1976 11.8x3.1C-1976 1.7x1.9 C-1976 105x2 C-1976 110.2x2.4C-1976 1.8x1 C-1976 105x3 C-1976 110.4x3.6C-1976 10.1x0.6 C-1976 105x3.5 C-1976 110.8x3.1C-1976 10.2x1.9 C-1976 105x4 C-1976 110x10C-1976 10.2x2.4 C-1976 105x5 C-1976 110x2C-1976 10.5x1 C-1976 106.2x1.9 C-1976 110x2.4C-1976 10.5x1.5 C-1976 106x2 C-1976 110x2.5C-1976 10.5x2 C-1976 106x3 C-1976 110x3C-1976 10.5x2.5 C-1976 106x3.5 C-1976 110x4C-1976 10.6x2.2 C-1976 107.8x3.1 C-1976 110x5C-1976 10.6x2.4 C-1976 107.8x8.6 C-1976 111.8x3.1C-1976 10.6x5.7 C-1976 107x2 C-1976 111x2C-1976 10.7x1.9 C-1976 107x2.5 C-1976 111x3.5C-1976 10.8x3.1 C-1976 107x3.5 C-1976 111x4.5C-1976 100.2x2.4 C-1976 107x4 C-1976 112.8x8.6C-1976 100x10 C-1976 107x4.5 C-1976 112x3C-1976 100x2 C-1976 108.6x5.7 C-1976 112X3.5C-1976 100x2.4 C-1976 108.8x3.1 C-1976 112x4C-1976 100x3 C-1976 108x3 C-1976 112x4.5C-1976 100x3.5 C-1976 108x3.5 C-1976 113.6x5.7C-1976 100x4 C-1976 108x4.5 C-1976 113.8x3.1C-1976 100x4.5 C-1976 108x6 C-1976 113X1.2C-1976 100x5 C-1976 109.5x3.1 C-1976 113x2C-1976 100x6 C-1976 109x3 C-1976 113x3.5C-1976 101.2x1.9 C-1976 109x5 C-1976 113x6C-1976 101.8x3.1 C-1976 10x1 C-1976 114.2x2.4C-1976 101x2 C-1976 10x1.5 C-1976 114x3C-1976 101x3 C-1976 10x2 C-1976 114x3.5C-1976 101x4.5 C-1976 10x2.5 C-1976 114x4.5C-1976 102.1x1.45 C-1976 10x3 C-1976 114x6C-1976 102.6x5.7 C-1976 10x3.5 C-1976 115.2x2.4C-1976 102.8x8.6 C-1976 10x4 C-1976 115X1.6C-1976 102x3 C-1976 10x5 C-1976 115x2C-1976 102x4 C-1976 11.2x1.9 C-1976 115x3C-1976 102x5 C-1976 11.2x2.4 C-1976 115x3.5C-1976 103.6x5.7 C-1976 11.2x2.5 C-1976 115x4C-1976 103.8x3.1 C-1976 11.2X3.1 C-1976 115x4.5C-1976 103x2 C-1976 11.5x1 C-1976 115x5C-1976 103x3 C-1976 11.5x2 C-1976 116.2x1.9C-1976 103x3.5 C-1976 11.5x2.5 C-1976 116.7x2.2

Seals 006

标准代码






ID × C/SC-1976 116x2 C-1976 121x2 C-1976 13.6x2.4C-1976 116x2.5 C-1976 122.8x8.6 C-1976 13.6x5.7C-1976 117.5x1.2 C-1976 122x3 C-1976 13.7x2.5C-1976 117.6x5.7 C-1976 122x3.5 C-1976 13.8x3.1C-1976 117.8x8.6 C-1976 122x4 C-1976 130.2x2.4C-1976 117x3 C-1976 123.6x5.7 C-1976 130x10C-1976 117x4 C-1976 123.8x3.1 C-1976 130x2C-1976 117x4.5 C-1976 123x1.5 C-1976 130x3C-1976 118.6x5.7 C-1976 123x3 C-1976 130x3.5C-1976 118.8x3.1 C-1976 123x3.5 C-1976 130x4C-1976 118x3 C-1976 123x4.5 C-1976 130x5C-1976 118x3.5 C-1976 123x6 C-1976 131.2x1.9C-1976 118x6 C-1976 124.5x3.1 C-1976 131x2C-1976 119.4x5.7 C-1976 124x3 C-1976 131x3.5C-1976 119x3 C-1976 124x5.5 C-1976 132.8x8.6C-1976 11x1 C-1976 125.2x2.4 C-1976 132x3C-1976 11x1.5 C-1976 125x2 C-1976 132x4C-1976 11x2 C-1976 125x3 C-1976 133.6x5.7C-1976 11x2.5 C-1976 125x3.5 C-1976 133.8x3.1C-1976 11x3 C-1976 125x4.5 C-1976 133x3.5C-1976 11x3.5 C-1976 125x5 C-1976 133x4.5C-1976 11x4 C-1976 126.2x1.9 C-1976 133x6C-1976 11x4.5 C-1976 126x2 C-1976 134x3C-1976 11x5 C-1976 127.8x8.6 C-1976 135.2x2.4C-1976 12.2x1.9 C-1976 127x4 C-1976 135x2C-1976 12.2x2.4 C-1976 128.1x1.45 C-1976 135x3C-1976 12.4x1.9 C-1976 128.6x5.7 C-1976 135x4.5C-1976 12.5x1 C-1976 128.8x3.1 C-1976 135x5C-1976 12.5x1.5 C-1976 128x3 C-1976 136.2x1.9C-1976 12.5x2 C-1976 128x3.5 C-1976 136x2C-1976 12.5x2.5 C-1976 128x6 C-1976 136x3C-1976 12.6x1.2 C-1976 129x4.5 C-1976 136x3.5C-1976 12.8x3.1 C-1976 12x1 C-1976 137.8x8.6C-1976 120.2x2.4 C-1976 12x1.9 C-1976 137x4C-1976 120X1.2 C-1976 12x2 C-1976 138.6x5.7C-1976 120x10 C-1976 12x2.5 C-1976 138.8x3.1C-1976 120x2 C-1976 12x3 C-1976 138x3.5C-1976 120x2.4 C-1976 12x3.5 C-1976 138x6C-1976 120x2.5 C-1976 12x4 C-1976 139x3C-1976 120x3 C-1976 12x5 C-1976 139x4.5C-1976 120x3.5 C-1976 13.2x1.9 C-1976 13x1C-1976 120x4 C-1976 13.2x2.4 C-1976 13x1.5C-1976 120x4.5 C-1976 13.5x2 C-1976 13x1.9C-1976 120x5 C-1976 13.5x2.5 C-1976 13x2C-1976 121.2x1.9 C-1976 13.6x2.2 C-1976 13x2.5

Seals 007

标准代码






ID × C/SC-1976 13x3 C-1976 148x3 C-1976 155x3C-1976 13x3.5 C-1976 148x3.5 C-1976 155x3.5C-1976 13x4 C-1976 148x6 C-1976 155x5C-1976 13x5 C-1976 149x3 C-1976 156x2C-1976 14.2x1.9 C-1976 14x1 C-1976 157.8x8.6C-1976 14.2x2.4 C-1976 14x1.5 C-1976 157x4C-1976 14.5x1 C-1976 14x2 C-1976 158.6x5.7C-1976 14.5x2 C-1976 14x2.2 C-1976 158.8x3.1C-1976 14.5x2.5 C-1976 14x2.5 C-1976 158x3.5C-1976 14.5x3 C-1976 14x3 C-1976 158x6C-1976 14.6x2.4 C-1976 14x3.5 C-1976 159x4C-1976 14.8x3.1 C-1976 14x4 C-1976 15x1C-1976 140.2x2.4 C-1976 14x4.5 C-1976 15x1.5C-1976 140x2 C-1976 14x5 C-1976 15x1.9C-1976 140x3 C-1976 15.2x1.9 C-1976 15x2C-1976 140x3.5 C-1976 15.2x2.4 C-1976 15x2.4C-1976 140x4.5 C-1976 15.4x6 C-1976 15x2.5C-1976 140x5 C-1976 15.5x1 C-1976 15x3C-1976 142.8x8.6 C-1976 15.5x2 C-1976 15x3.5C-1976 142x3 C-1976 15.5x2.5 C-1976 15x4C-1976 142x4 C-1976 15.5x3 C-1976 15x5C-1976 143.6x5.7 C-1976 15.5x6 C-1976 16.1x1.6C-1976 143.8x3.1 C-1976 15.6x2.2 C-1976 16.2x1.9C-1976 143x3 C-1976 15.6x5.7 C-1976 16.2x2.4C-1976 143x3.5 C-1976 15.75x6 C-1976 16.5x1C-1976 143x4.5 C-1976 15.8x3.1 C-1976 16.5x1.5C-1976 143x6 C-1976 150x10 C-1976 16.5x2C-1976 144x3 C-1976 150x2 C-1976 16.5x2.5C-1976 144x4 C-1976 150x3 C-1976 16.5x3C-1976 145.2x2.4 C-1976 150x3.5 C-1976 16.8x3.1C-1976 145x10 C-1976 150x4 C-1976 160x10C-1976 145x2 C-1976 150x4.5 C-1976 160x3C-1976 145x3 C-1976 150x5 C-1976 160x3.5C-1976 145x3.5 C-1976 151x2 C-1976 160x4.5C-1976 145x4.5 C-1976 152.8x8.6 C-1976 160x5C-1976 145x5 C-1976 152x3 C-1976 161x4.5C-1976 146.2x1.9 C-1976 152x4 C-1976 162.8x8.6C-1976 146.6x5.7 C-1976 153.6x5.7 C-1976 162x3C-1976 146x2 C-1976 153.8x3.1 C-1976 162x4C-1976 146x3 C-1976 153x3 C-1976 163.6x5.7C-1976 146x4.5 C-1976 153x3.5 C-1976 163.8x3.1C-1976 147.8x8.6 C-1976 153x4.5 C-1976 163x3.5C-1976 147x4 C-1976 153x6 C-1976 163x6C-1976 148.6x5.7 C-1976 154x3 C-1976 164x3C-1976 148.8x3.1 C-1976 155x10 C-1976 165x3

Seals 008

标准代码






ID × C/SC-1976 165x3.5 C-1976 176x2 C-1976 187x4C-1976 165x5 C-1976 177.8x8.6 C-1976 188.6x5.7C-1976 167.8x8.6 C-1976 177x4 C-1976 188.8x3.1C-1976 167x4 C-1976 178.6x5.7 C-1976 188x3.5C-1976 168.6x5.7 C-1976 178.8x3.1 C-1976 188x6C-1976 168.8x3.1 C-1976 178x3.5 C-1976 18x1C-1976 168x3.5 C-1976 178x6 C-1976 18x1.5C-1976 168x4 C-1976 17x1 C-1976 18x2C-1976 168x6 C-1976 17x1.5 C-1976 18x2.5C-1976 169x3 C-1976 17x2 C-1976 18x3C-1976 16x1 C-1976 17x2.4 C-1976 18x3.5C-1976 16x1.5 C-1976 17x2.5 C-1976 18x4C-1976 16x1.9 C-1976 17x3 C-1976 18x4.5C-1976 16x2 C-1976 17x3.5 C-1976 18x5C-1976 16x2.4 C-1976 17x4 C-1976 18x6C-1976 16x2.5 C-1976 17x4.5 C-1976 19.2x1.9C-1976 16x3 C-1976 17x5 C-1976 19.2x2.4C-1976 16x3.5 C-1976 18.2x1.9 C-1976 19.5x2C-1976 16x4 C-1976 18.2x2.4 C-1976 19.5x2.5C-1976 16x4.5 C-1976 18.5x1.5 C-1976 19.5x3C-1976 16x5 C-1976 18.5x2 C-1976 19.6x2.2C-1976 17.2x1.9 C-1976 18.5x2.5 C-1976 19.8x3.1C-1976 17.2x2.4 C-1976 18.6x5.7 C-1976 19.8x8.6C-1976 17.5x1 C-1976 18.8x3.1 C-1976 190x10C-1976 17.5x2 C-1976 180x10 C-1976 190x2.5C-1976 17.5x3 C-1976 180x2 C-1976 190x3C-1976 17.8x3.1 C-1976 180x3 C-1976 190x3.5C-1976 170x3 C-1976 180x3.5 C-1976 190x4.5C-1976 170x3.5 C-1976 180x4.5 C-1976 190x5C-1976 170x5 C-1976 180x5 C-1976 192.8x8.6C-1976 171x4.5 C-1976 181.8x3.1 C-1976 192x4C-1976 172.8x8.6 C-1976 181x4.5 C-1976 193.6x5.7C-1976 172x4 C-1976 182.8x8.6 C-1976 193.8x3.1C-1976 173.6x5.7 C-1976 182x3 C-1976 193x2.5C-1976 173.8x3.1 C-1976 182x4 C-1976 193x3C-1976 173x3 C-1976 183.6x5.7 C-1976 193x3.5C-1976 173x3.5 C-1976 183.8x3.1 C-1976 193x6C-1976 173x6 C-1976 183x3.5 C-1976 194x3C-1976 174x4 C-1976 183x6 C-1976 194x4C-1976 175.2x2.4 C-1976 184.6x5.7 C-1976 195x3C-1976 175x3 C-1976 184x3 C-1976 195x3.5C-1976 175x3.5 C-1976 185x3 C-1976 195x5C-1976 175x4.5 C-1976 185x3.5 C-1976 197.8x8.6C-1976 175x5 C-1976 185x5 C-1976 197x4C-1976 175x6 C-1976 187.8x8.6 C-1976 198.6x5.7

Seals 009

标准代码






ID × C/SC-1976 198.8x3.1 C-1976 203.8x3.1 C-1976 217x4C-1976 198x3.5 C-1976 203x3.5 C-1976 218.6x5.7C-1976 198x6 C-1976 203x4.5 C-1976 218.8x3.1C-1976 199.6x5.7 C-1976 203x6 C-1976 218x3C-1976 199x4.5 C-1976 205x3 C-1976 218x3.5C-1976 19x1 C-1976 205x4.5 C-1976 218x6C-1976 19x1.5 C-1976 205x5 C-1976 219x4.5C-1976 19x2 C-1976 207.8x8.6 C-1976 21x1C-1976 19x2.4 C-1976 207x4 C-1976 21x1.5C-1976 19x2.5 C-1976 208.6x5.7 C-1976 21x2C-1976 19x3 C-1976 208.8x3.1 C-1976 21x2.5C-1976 19x3.5 C-1976 208x3 C-1976 21x3C-1976 19x4 C-1976 208x3.5 C-1976 21x3.5C-1976 19x4.5 C-1976 208x6 C-1976 21x4C-1976 19x5 C-1976 209x4.5 C-1976 21x4.5C-1976 1x1 C-1976 20x1 C-1976 21x5C-1976 1x1.5 C-1976 20x1.5 C-1976 22.1x1.6C-1976 1x2 C-1976 20x2 C-1976 22.2x1.9C-1976 2.2x1.9 C-1976 20x2.5 C-1976 22.2x2.4C-1976 2.2x2.4 C-1976 20x3 C-1976 22.5x1C-1976 2.3x1.5 C-1976 20x3.5 C-1976 22.5x1.5C-1976 2.4x1.1 C-1976 20x4 C-1976 22.5x2.5C-1976 2.55x1.5 C-1976 20x4.5 C-1976 22.6x2.2C-1976 2.5x1 C-1976 20x5 C-1976 22.8x3.1C-1976 2.5x2 C-1976 21.2x1.9 C-1976 22.8x4.6C-1976 2.5x2.5 C-1976 21.2x2.4 C-1976 220x10C-1976 2.6x2.2 C-1976 21.5x1 C-1976 220x3C-1976 2.7x1.9 C-1976 21.5x2 C-1976 220x4.5C-1976 2.8x1.6 C-1976 21.5x2.5 C-1976 220x5C-1976 20.2x1.9 C-1976 21.8x3.1 C-1976 222.8x8.6C-1976 20.2x2.4 C-1976 210x10 C-1976 222x4C-1976 20.5x1.5 C-1976 210x3 C-1976 223.6x5.7C-1976 20.5x2 C-1976 210x5 C-1976 223.8x3.1C-1976 20.5x2.5 C-1976 212.8x8.6 C-1976 223x3.5C-1976 20.5x3 C-1976 212x3 C-1976 223x6C-1976 20.6x5.7 C-1976 212x4 C-1976 225x3C-1976 20.8x3.1 C-1976 213.6x5.7 C-1976 225x4.5C-1976 200x10 C-1976 213.8x3.1 C-1976 225x5C-1976 200x3 C-1976 213x3.5 C-1976 226x2C-1976 200x3.5 C-1976 213x6 C-1976 227.8x8.6C-1976 200x4.5 C-1976 215x3 C-1976 227x4C-1976 200x5 C-1976 215x4 C-1976 228.6x5.7C-1976 202.8x8.6 C-1976 215x5 C-1976 228.8x3.1C-1976 202x4 C-1976 216x3 C-1976 228x3.5C-1976 203.6x5.7 C-1976 217.8x8.6 C-1976 228x6

Seals 010

标准代码






ID × C/SC-1976 22x1 C-1976 23x4 C-1976 25.8x4.6C-1976 22x1.5 C-1976 23x5 C-1976 250x10C-1976 22x1.9 C-1976 23x6 C-1976 250x3C-1976 22x2 C-1976 24.2x1.9 C-1976 250x4.5C-1976 22x2.5 C-1976 24.2x2.4 C-1976 250x5C-1976 22x3 C-1976 24.5x1 C-1976 252.8x8.6C-1976 22x3.5 C-1976 24.5x1.5 C-1976 252x4C-1976 22x4 C-1976 24.5x4.5 C-1976 253.6x5.7C-1976 22x5 C-1976 24.6x5.7 C-1976 253.8x3.1C-1976 22x6 C-1976 24.8x3.1 C-1976 253x3C-1976 23.2x1.9 C-1976 240x10 C-1976 253x3.5C-1976 23.2x2.4 C-1976 240x3 C-1976 253x6C-1976 23.5x1.5 C-1976 240x5 C-1976 255x3C-1976 23.5x2.5 C-1976 242.8x8.6 C-1976 255x4.5C-1976 23.5x3 C-1976 242x3 C-1976 255x5C-1976 23.6x2.2 C-1976 242x4 C-1976 257.8x8.6C-1976 23.6x5.7 C-1976 243.6x5.7 C-1976 257x4C-1976 23.8x3.1 C-1976 243.8x3.1 C-1976 258.6x5.7C-1976 230x10 C-1976 243x3.5 C-1976 258.8x3.1C-1976 230x3 C-1976 243x4 C-1976 258x3.5C-1976 230x4.5 C-1976 243x6 C-1976 258x6C-1976 230x5 C-1976 245x3 C-1976 25x1C-1976 232.8x8.6 C-1976 245x5 C-1976 25x1.5C-1976 232x3 C-1976 247.8x8.6 C-1976 25x2C-1976 232x4 C-1976 247x4 C-1976 25x2.5C-1976 233.6x5.7 C-1976 248.6x5.7 C-1976 25x3C-1976 233.8x3.1 C-1976 248.8x3.1 C-1976 25x3.5C-1976 233x3 C-1976 248x3.5 C-1976 25x4C-1976 233x3.5 C-1976 248x6 C-1976 25x4.5C-1976 233x6 C-1976 249.8x3.1 C-1976 25x5C-1976 234x4 C-1976 24x1 C-1976 25x6C-1976 235x3 C-1976 24x1.5 C-1976 26.2x1.9C-1976 235x5 C-1976 24x2 C-1976 26.2x2.4C-1976 237.8x8.6 C-1976 24x2.5 C-1976 26.5x1.5C-1976 237x4 C-1976 24x3 C-1976 26.6x1C-1976 238.6x5.7 C-1976 24x3.5 C-1976 26.8x3.1C-1976 238.8x3.1 C-1976 24x4 C-1976 260x3C-1976 238x3.5 C-1976 24x4.5 C-1976 260x5C-1976 238x6 C-1976 24x5 C-1976 262.8x8.6C-1976 23x1 C-1976 25.2x1.9 C-1976 262x4C-1976 23x1.5 C-1976 25.2x2.4 C-1976 263.6x5.7C-1976 23x2 C-1976 25.4x2.3 C-1976 263.8x3.1C-1976 23x2.5 C-1976 25.5x1 C-1976 263x3.5C-1976 23x3 C-1976 25.6x1.45 C-1976 263x6C-1976 23x3.5 C-1976 25.8x3.1 C-1976 265x3

Seals 011

标准代码






ID × C/SC-1976 265x5 C-1976 280x3 C-1976 29x1.5C-1976 267.8x8.6 C-1976 280x5 C-1976 29x2C-1976 267x4 C-1976 282.8x8.6 C-1976 29x2.5C-1976 268.6x5.7 C-1976 282x4 C-1976 29x3C-1976 268.8x3.1 C-1976 283.6x5.7 C-1976 29x3.5C-1976 268x6 C-1976 283.8x3.1 C-1976 29x4C-1976 26x1 C-1976 283x3.5 C-1976 29x5C-1976 26x1.5 C-1976 283x6 C-1976 2x1C-1976 26x2 C-1976 285x3 C-1976 2x1.25C-1976 26x2.5 C-1976 285x5 C-1976 2x1.5C-1976 26x3 C-1976 287.8x8.6 C-1976 2x2C-1976 26x3.5 C-1976 287x4 C-1976 2x2.5C-1976 26x4 C-1976 288.6x5.7 C-1976 2x3C-1976 26x5 C-1976 288.8x3.1 C-1976 3.1x1.6C-1976 27.2x1.9 C-1976 288x3.5 C-1976 3.2x1.6C-1976 27.2x2.4 C-1976 288x6 C-1976 3.2x1.9C-1976 27.5x1.5 C-1976 28x1 C-1976 3.2x2.4C-1976 27.8x3.1 C-1976 28x1.5 C-1976 3.35x1.78C-1976 270x3 C-1976 28x2 C-1976 3.5x1C-1976 270x5 C-1976 28x2.5 C-1976 3.5x2C-1976 272.8x8.6 C-1976 28x3 C-1976 3.6x1.2C-1976 272x4 C-1976 28x3.5 C-1976 3.6x2.2C-1976 273.6x5.7 C-1976 28x4 C-1976 3.7x1.9C-1976 273.8x3.1 C-1976 28x4.5 C-1976 3.8x3.1C-1976 273x3 C-1976 28x5 C-1976 3.9x0.75C-1976 273x3.5 C-1976 29.2x1.9 C-1976 30.2x1.9C-1976 274x3 C-1976 29.2x2.4 C-1976 30.2x2.4C-1976 275x5 C-1976 29.5x1.7 C-1976 30.8x3.1C-1976 277.8x8.6 C-1976 29.5x3 C-1976 30.8x4.6C-1976 277x4 C-1976 29.8x3.1 C-1976 300x10C-1976 278.6x5.7 C-1976 290x3 C-1976 300x3C-1976 278.8x3.1 C-1976 290x5 C-1976 300x5C-1976 278x6 C-1976 292.8x8.6 C-1976 302.8x8.6C-1976 27x1 C-1976 292x4 C-1976 302x4C-1976 27x1.5 C-1976 293.6x5.7 C-1976 303.6x5.7C-1976 27x2 C-1976 293.8x3.1 C-1976 303.8x3.1C-1976 27x2.5 C-1976 293x3.5 C-1976 303x6C-1976 27x3 C-1976 293x6 C-1976 305x3C-1976 27x3.5 C-1976 295x5 C-1976 305x5C-1976 27x4 C-1976 297.8x8.6 C-1976 307.8x8.6C-1976 27x5 C-1976 297x4 C-1976 307x4C-1976 28.2x1.9 C-1976 298.6x5.7 C-1976 308.6x5.7C-1976 28.2x2.4 C-1976 298.8x3.1 C-1976 308.8x3.1C-1976 28.6x5.7 C-1976 298x6 C-1976 308x3.5C-1976 28.8x3.1 C-1976 29x1 C-1976 308x6

Seals 012

标准代码






ID × C/SC-1976 30x1 C-1976 322.8x8.6 C-1976 33x3.5C-1976 30x1.5 C-1976 322x4 C-1976 33x4C-1976 30x2 C-1976 323.6x5.7 C-1976 33x4.5C-1976 30x2.1 C-1976 323.8x3.1 C-1976 33x5C-1976 30x2.5 C-1976 323x3.5 C-1976 34.2x1.9C-1976 30x3 C-1976 325x5 C-1976 34.2x2.4C-1976 30x3.5 C-1976 327.8x8.6 C-1976 34.5x3C-1976 30x4 C-1976 327x4 C-1976 34.8x3.1C-1976 30x4.5 C-1976 328.6x5.7 C-1976 340x5C-1976 30x5 C-1976 328.8x3.1 C-1976 342.8x8.6C-1976 30x5.7 C-1976 328x6 C-1976 342x4C-1976 30x6 C-1976 32x1 C-1976 343.6x5.7C-1976 31.2x1.9 C-1976 32x1.5 C-1976 343.8x3.1C-1976 31.2x2.4 C-1976 32x2 C-1976 345x5C-1976 31.5x1 C-1976 32x2.5 C-1976 346.6X5.7C-1976 31.5x1.5 C-1976 32x3 C-1976 347.8x8.6C-1976 31.6x2.2 C-1976 32x3.5 C-1976 347x4C-1976 31.8x3.1 C-1976 32x4 C-1976 348.6x5.7C-1976 310x5 C-1976 32x5 C-1976 348x6C-1976 312.8x8.6 C-1976 33.2x1.9 C-1976 34x1C-1976 312x4 C-1976 33.2x2.4 C-1976 34x1.5C-1976 313.6x5.7 C-1976 33.5x1.5 C-1976 34x2C-1976 313.8x3.1 C-1976 33.5x3 C-1976 34x2.5C-1976 313x3.5 C-1976 33.6x5.7 C-1976 34x3C-1976 315x5 C-1976 33.8x3.1 C-1976 34x3.5C-1976 317.8x8.6 C-1976 330x3 C-1976 34x4C-1976 317x4 C-1976 330x5 C-1976 34x5C-1976 318.6x5.7 C-1976 330x6 C-1976 35.2x1.9C-1976 318.8x3.1 C-1976 331x3 C-1976 35.2x2.4C-1976 318x6 C-1976 332.8x8.6 C-1976 35.3x3C-1976 31x1 C-1976 332x4 C-1976 35.8x3.1C-1976 31x1.5 C-1976 333.6x5.7 C-1976 35.8x4.6C-1976 31x2.5 C-1976 333.8x3.1 C-1976 350x3C-1976 31x3 C-1976 333x3.5 C-1976 350x5C-1976 31x3.5 C-1976 335x6 C-1976 352.8x8.6C-1976 31x4 C-1976 337.8x8.6 C-1976 352x4C-1976 31x5 C-1976 337x4 C-1976 353.6x5.7C-1976 32.2x1.9 C-1976 338.6x5.7 C-1976 353.8x3.1C-1976 32.2x2.4 C-1976 338x6 C-1976 353x3.5C-1976 32.5x3 C-1976 339.6x5.7 C-1976 357.8x8.6C-1976 32.8x3.1 C-1976 33x1 C-1976 357x4C-1976 32.8x4.6 C-1976 33x1.5 C-1976 358.6x5.7C-1976 32.8x8.6 C-1976 33x2 C-1976 358x6C-1976 320x3 C-1976 33x2.5 C-1976 35x1C-1976 320x5 C-1976 33x3 C-1976 35x1.5

Seals 013

标准代码






ID × C/SC-1976 35x2.5 C-1976 377.8x8.6 C-1976 39.5x3C-1976 35x3 C-1976 377x4 C-1976 39.6x2.2C-1976 35x3.5 C-1976 378.6x5.7 C-1976 39.6x5.7C-1976 35x4 C-1976 378x6 C-1976 39.8x3.1C-1976 35x5 C-1976 379.6x5.7 C-1976 390x3C-1976 35x5.7 C-1976 37x1 C-1976 390x5C-1976 35x6 C-1976 37x1.5 C-1976 392.8x8.6C-1976 36.2x1.9 C-1976 37x2 C-1976 392x4C-1976 36.2x2.4 C-1976 37x2.5 C-1976 393.6x5.7C-1976 36.5x1.5 C-1976 37x3 C-1976 393x3.5C-1976 36.5x2 C-1976 37x3.5 C-1976 395x5C-1976 36.5x3 C-1976 37x4 C-1976 397.8x8.6C-1976 36.6x5.7 C-1976 37x5 C-1976 397x4C-1976 36.8x3.1 C-1976 38.2x1.9 C-1976 398.6x5.7C-1976 360x5 C-1976 38.2x2.4 C-1976 398x6.5C-1976 362.8x8.6 C-1976 38.5x1 C-1976 399.6x5.7C-1976 362x4 C-1976 38.6x5.7 C-1976 39x1C-1976 363.6x5.7 C-1976 38.8x3.1 C-1976 39x1.5C-1976 363x3.5 C-1976 38.8x4.6 C-1976 39x2C-1976 365x3 C-1976 380x3 C-1976 39x2.5C-1976 365x4 C-1976 380x5 C-1976 39x3C-1976 367.8x8.6 C-1976 382.8x8.6 C-1976 39x3.5C-1976 367x4 C-1976 382x4 C-1976 39x4C-1976 368.6x5.7 C-1976 383.6x5.7 C-1976 39x5C-1976 368x3.5 C-1976 383.8x3.1 C-1976 3x1C-1976 368x6 C-1976 383x3.5 C-1976 3x1.5C-1976 36x1 C-1976 387.8x8.6 C-1976 3x2C-1976 36x1.5 C-1976 387x4 C-1976 3x2.5C-1976 36x2 C-1976 388.6x5.7 C-1976 3x3C-1976 36x2.5 C-1976 388x6 C-1976 3x3.5C-1976 36x3 C-1976 38x1 C-1976 4.2x1.9C-1976 36x3.5 C-1976 38x1.5 C-1976 4.2x2.4C-1976 36x4 C-1976 38x2 C-1976 4.3x1.6C-1976 36x5 C-1976 38x2.5 C-1976 4.5x1C-1976 37.2x1.9 C-1976 38x3 C-1976 4.5x2C-1976 37.2x2.4 C-1976 38x3.5 C-1976 4.5x2.5C-1976 37.5x3 C-1976 38x4 C-1976 4.6x2.2C-1976 37.8x3.1 C-1976 38x4.5 C-1976 4.7x1.4C-1976 37.8x8.6 C-1976 38x5 C-1976 4.7x1.9C-1976 370x5 C-1976 38x6 C-1976 4.8x3.1C-1976 372.8x8.6 C-1976 39.24x2.62 C-1976 40.2x1.9C-1976 372x4 C-1976 39.2x1.9 C-1976 40.2x2.4C-1976 373.6x5.7 C-1976 39.2x2.4 C-1976 40.5x2C-1976 373x3.5 C-1976 39.5x1 C-1976 40.5x3C-1976 375x5 C-1976 39.5x1.5 C-1976 40.6x5.7

Seals 014

标准代码






ID × C/SC-1976 40.8x3.1 C-1976 42.8x3.1 C-1976 447.8x8.6C-1976 40.8x4.6 C-1976 42.8x8.6 C-1976 448.6x5.7C-1976 400x10 C-1976 422.8x8.6 C-1976 44x1C-1976 400x3 C-1976 422x4 C-1976 44x1.5C-1976 400x5 C-1976 423.6x5.7 C-1976 44x2C-1976 400x6 C-1976 427.8x8.6 C-1976 44x2.5C-1976 402.8x8.6 C-1976 428.6x5.7 C-1976 44x3C-1976 402x4 C-1976 428x3.5 C-1976 44x3.5C-1976 403.6x5.7 C-1976 42x1 C-1976 44x4C-1976 407.8x8.6 C-1976 42x1.5 C-1976 44x5C-1976 408.6x5.7 C-1976 42x2 C-1976 45.2x1.9C-1976 408x6 C-1976 42x2.5 C-1976 45.2x2.4C-1976 40x1 C-1976 42x3 C-1976 45.6x2.4C-1976 40x1.5 C-1976 42x3.5 C-1976 45.6x5.7C-1976 40x2 C-1976 42x4 C-1976 45.8x3.1C-1976 40x2.5 C-1976 42x4.5 C-1976 450x5C-1976 40x3 C-1976 42x5 C-1976 452.8x8.6C-1976 40x3.5 C-1976 42x6 C-1976 453.6x5.7C-1976 40x4 C-1976 43.2x1.9 C-1976 457.8x8.6C-1976 40x5 C-1976 43.2x2.4 C-1976 458.6x5.7C-1976 40x6 C-1976 43.5x3 C-1976 45x1C-1976 41.2x1.9 C-1976 43.6x5.7 C-1976 45x1.5C-1976 41.2x2.4 C-1976 43.8x3.1 C-1976 45x2C-1976 41.6x5.7 C-1976 43.8x4.6 C-1976 45x2.5C-1976 41.8x3.1 C-1976 430x3 C-1976 45x3C-1976 410x4 C-1976 432.8x8.6 C-1976 45x3.5C-1976 412.8x8.6 C-1976 432x4 C-1976 45x4C-1976 412x3 C-1976 433.6x5.7 C-1976 45x5C-1976 412x4 C-1976 437.8x8.6 C-1976 46.2x1.9C-1976 413.6x5.7 C-1976 438.6x5.7 C-1976 46.2x2.4C-1976 413x3.5 C-1976 43x1 C-1976 46.5x2C-1976 417.8x8.6 C-1976 43x1.5 C-1976 46.6x5.7C-1976 418.6x5.7 C-1976 43x2 C-1976 46.8x3.1C-1976 418x6 C-1976 43x2.5 C-1976 46.8x4.6C-1976 41x1 C-1976 43x3 C-1976 462.8x8.6C-1976 41x1.5 C-1976 43x3.5 C-1976 463.6x5.7C-1976 41x2 C-1976 43x4 C-1976 467.8x8.6C-1976 41x2.5 C-1976 43x5 C-1976 468.6x5.7C-1976 41x3 C-1976 44.2x1.9 C-1976 46x1C-1976 41x3.5 C-1976 44.2x2.4 C-1976 46x1.5C-1976 41x4 C-1976 44.5x3 C-1976 46x2C-1976 41x5 C-1976 44.8x3.1 C-1976 46x2.5C-1976 42.2x1.9 C-1976 442.8x8.6 C-1976 46x3C-1976 42.2x2.4 C-1976 442x4 C-1976 46x3.5C-1976 42.6x5.7 C-1976 443.6x5.7 C-1976 46x4

Seals 015

标准代码






ID × C/SC-1976 46x5 C-1976 48x6 C-1976 50x3.5C-1976 46x6 C-1976 49.2x1.9 C-1976 50x4C-1976 47.2x1.9 C-1976 49.2x2.4 C-1976 50x4.5C-1976 47.2x2.4 C-1976 49.8x3.1 C-1976 50x5C-1976 47.5x1.5 C-1976 492.8x8.6 C-1976 50x6C-1976 47.8x3.1 C-1976 493.6x5.7 C-1976 51.2x1.9C-1976 47.8x8.6 C-1976 498.6x5.7 C-1976 51.2x2.4C-1976 470x3 C-1976 49x1 C-1976 51.8x3.1C-1976 470x5 C-1976 49x1.5 C-1976 510x4C-1976 472.8x8.6 C-1976 49x2 C-1976 512.8x8.6C-1976 473.6x5.7 C-1976 49x2.5 C-1976 513.6x5.7C-1976 477.8x8.6 C-1976 49x3 C-1976 518.6x5.7C-1976 478.6x5.7 C-1976 49x3.5 C-1976 51x1.5C-1976 47x1 C-1976 49x4 C-1976 51x2C-1976 47x1.5 C-1976 49x4.5 C-1976 51x2.5C-1976 47x2 C-1976 49x5 C-1976 51x3C-1976 47x2.5 C-1976 4x1 C-1976 51x3.5C-1976 47x3 C-1976 4x1.5 C-1976 51x4C-1976 47x3.5 C-1976 4x2 C-1976 51x5C-1976 47x4 C-1976 4x2.5 C-1976 52.2x1.9C-1976 47x5 C-1976 4x3 C-1976 52.2x2.4C-1976 48.2x1.9 C-1976 4x3.5 C-1976 52.5x3C-1976 48.2x2.4 C-1976 4x4 C-1976 52.8x3.1C-1976 48.5x3 C-1976 5.2x1.9 C-1976 52.8x8.6C-1976 48.6x2.2 C-1976 5.2x2.4 C-1976 520x5C-1976 48.6x5.7 C-1976 5.5x1 C-1976 522.8x8.6C-1976 48.7x2 C-1976 5.5x2 C-1976 523.6x5.7C-1976 48.8x3.1 C-1976 5.5x3 C-1976 528.6x5.7C-1976 480x5 C-1976 5.6x2.2 C-1976 52x1.5C-1976 482.8x8.6 C-1976 5.7x1.9 C-1976 52x2C-1976 483.6x5.7 C-1976 5.8x3.1 C-1976 52x2.5C-1976 487.8x8.6 C-1976 50.2x1.9 C-1976 52x3C-1976 487x4 C-1976 50.2x2.4 C-1976 52x3.5C-1976 488.6x5.7 C-1976 50.6x5.7 C-1976 52x4C-1976 488x3.5 C-1976 50.8x3.1 C-1976 52x5C-1976 48x1 C-1976 50.8x4.6 C-1976 53.2x1.9C-1976 48x1.5 C-1976 502.8x8.6 C-1976 53.2x2.4C-1976 48x10 C-1976 503.6x5.7 C-1976 53.6x5.7C-1976 48x2 C-1976 507.8x8.6 C-1976 53.8x3.1C-1976 48x2.5 C-1976 508.6x5.7 C-1976 532.8x8.6C-1976 48x3 C-1976 50x1 C-1976 533.6x5.7C-1976 48x3.5 C-1976 50x1.5 C-1976 538.6x5.7C-1976 48x4 C-1976 50x2 C-1976 53x1.5C-1976 48x4.5 C-1976 50x2.5 C-1976 53x2.5C-1976 48x5 C-1976 50x3 C-1976 53x3

Seals 016

标准代码






ID × C/SC-1976 53x3.5 C-1976 56x2.5 C-1976 59x5C-1976 53x4 C-1976 56x3 C-1976 5x1C-1976 53x4.5 C-1976 56x3.5 C-1976 5x1.5C-1976 53x5 C-1976 56x4 C-1976 5x1.6C-1976 53x6 C-1976 56x4.5 C-1976 5x2C-1976 54.2x1.9 C-1976 56x5 C-1976 5x2.5C-1976 54.2x2.4 C-1976 56x6 C-1976 5x3C-1976 54.6x2.2 C-1976 57.2x1.9 C-1976 5x3.5C-1976 54.8x3.1 C-1976 57.2x2.4 C-1976 5x4C-1976 542.8x8.6 C-1976 57.8x3.1 C-1976 5x5C-1976 543.6x5.7 C-1976 57.8x8.6 C-1976 6.2x1.9C-1976 548.6x5.7 C-1976 573.6x5.7 C-1976 6.2x2.4C-1976 54x1.5 C-1976 578.6x5.7 C-1976 6.5x1C-1976 54x2 C-1976 57x1.5 C-1976 6.5x2C-1976 54x2.5 C-1976 57X2 C-1976 6.5x3C-1976 54x3 C-1976 57x2.5 C-1976 6.6x2.2C-1976 54x3.5 C-1976 57x3 C-1976 6.7x1.9C-1976 54x4 C-1976 57x3.5 C-1976 6.8x3.1C-1976 54x4.5 C-1976 57x4 C-1976 60.2x1.9C-1976 54x5 C-1976 57x5 C-1976 60.2x2.4C-1976 55.2x1.9 C-1976 58.2x1.9 C-1976 60.5x3C-1976 55.2x2.4 C-1976 58.2x2.4 C-1976 60.6x5.7C-1976 55.8x3.1 C-1976 58.4x3 C-1976 60.8x3.1C-1976 552.8x8.6 C-1976 58.6x5.7 C-1976 60x1.5C-1976 553.6x5.7 C-1976 58.8x3.1 C-1976 60x10C-1976 558.6x5.7 C-1976 588.6x5.7 C-1976 60x2C-1976 55x1.5 C-1976 58x1.5 C-1976 60x2.5C-1976 55x1.7 C-1976 58x10 C-1976 60x3C-1976 55x2 C-1976 58x2 C-1976 60x3.5C-1976 55x2.5 C-1976 58x2.5 C-1976 60x4C-1976 55x3 C-1976 58x3.5 C-1976 60x4.5C-1976 55x3.5 C-1976 58x4 C-1976 60x5C-1976 55x4 C-1976 58x4.5 C-1976 60x6C-1976 55x5 C-1976 58x5 C-1976 61.2x1.9C-1976 55x6 C-1976 58x6 C-1976 61.2x2.4C-1976 56.2x1.9 C-1976 59.2x1.9 C-1976 61.6x2.2C-1976 56.2x2.4 C-1976 59.2x2.4 C-1976 61.8x3.1C-1976 56.5x3 C-1976 59.8x3.1 C-1976 61x1.5C-1976 56.6x5.7 C-1976 59x1.5 C-1976 61x2C-1976 56.8x3.1 C-1976 59x2 C-1976 61x2.5C-1976 562.8x8.6 C-1976 59x2.5 C-1976 61x3C-1976 563.6x5.7 C-1976 59x3 C-1976 61x3.5C-1976 568.6x5.7 C-1976 59x3.5 C-1976 61x4C-1976 56x1.5 C-1976 59x4 C-1976 61x4.5C-1976 56x2 C-1976 59x4.5 C-1976 61x5

Seals 017

标准代码






ID × C/SC-1976 61x6 C-1976 65x4 C-1976 69x1.5C-1976 62.2x1.9 C-1976 65x4.5 C-1976 69x2C-1976 62.2x2.4 C-1976 65x5 C-1976 69x2.5C-1976 62.5x1.5 C-1976 65x6 C-1976 69x3C-1976 62.8x3.1 C-1976 66.2x1.9 C-1976 69x3.5C-1976 62.8x8.6 C-1976 66.2x2.4 C-1976 69x4C-1976 62x1.5 C-1976 66.4x3 C-1976 69x5C-1976 62x2 C-1976 66.8x3.1 C-1976 6x1C-1976 62x2.5 C-1976 66x1.5 C-1976 6x1.2C-1976 62x3 C-1976 66x2 C-1976 6x1.5C-1976 62x3.5 C-1976 66x2.4 C-1976 6x2C-1976 62x4 C-1976 66x2.5 C-1976 6x2.4C-1976 62x5 C-1976 66x3 C-1976 6x2.5C-1976 63.2x1.9 C-1976 66x3.5 C-1976 6x3C-1976 63.2x2.4 C-1976 66x4 C-1976 6x3.5C-1976 63.6x5.7 C-1976 66x5 C-1976 6x4C-1976 63.8x3.1 C-1976 67.2x1.9 C-1976 6x4.5C-1976 63x1.5 C-1976 67.2x2.4 C-1976 6x5C-1976 63x2 C-1976 67.6x5.7 C-1976 7.1x1.6C-1976 63x2.5 C-1976 67.8x3.1 C-1976 7.2x1.3C-1976 63x3 C-1976 67.8x8.6 C-1976 7.2x1.9C-1976 63x3.5 C-1976 67x1.5 C-1976 7.2x2.4C-1976 63x4 C-1976 67x10 C-1976 7.4x1.9C-1976 63x5 C-1976 67x2 C-1976 7.5x1C-1976 64.1x6.4 C-1976 67x2.5 C-1976 7.5x2C-1976 64.2x1.9 C-1976 67x3 C-1976 7.5x2.5C-1976 64.2x2.4 C-1976 67x3.5 C-1976 7.5x3.5C-1976 64.8x3.1 C-1976 67x4 C-1976 7.6x1.7C-1976 64x1.5 C-1976 67x5 C-1976 7.6x2.2C-1976 64x2 C-1976 68.2x2.4 C-1976 7.7x1.9C-1976 64x2.5 C-1976 68.5x3 C-1976 7.8x3.1C-1976 64x3 C-1976 68.6x5.7 C-1976 70.2x1.9C-1976 64x3.5 C-1976 68.8x3.1 C-1976 70.2x2.4C-1976 64x4 C-1976 68x1.5 C-1976 70.8x3.1C-1976 64x5 C-1976 68x2 C-1976 70x1.5C-1976 65.2x1.9 C-1976 68x2.5 C-1976 70x10C-1976 65.2x2.4 C-1976 68x3 C-1976 70x2C-1976 65.6x5.7 C-1976 68x3.5 C-1976 70x2.5C-1976 65.8x3.1 C-1976 68x4 C-1976 70x3C-1976 65x1.5 C-1976 68x5 C-1976 70x3.5C-1976 65x10 C-1976 68x6 C-1976 70x4C-1976 65x2 C-1976 69.2x1.9 C-1976 70x4.5C-1976 65x2.5 C-1976 69.2x2.4 C-1976 70x5C-1976 65x3 C-1976 69.5x2.62 C-1976 71.2x1.9C-1976 65x3.5 C-1976 69.8x3.1 C-1976 71.2x2.4

Seals 018

标准代码






ID × C/SC-1976 71.6x5.7 C-1976 75.8x3.1 C-1976 79x4C-1976 71.8x3.1 C-1976 75x2 C-1976 79x4.5C-1976 71x2 C-1976 75x2.5 C-1976 79x5C-1976 71x2.5 C-1976 75x3 C-1976 7x1C-1976 71x3 C-1976 75x3.5 C-1976 7x1.5C-1976 71x3.5 C-1976 75x4 C-1976 7x2C-1976 71x4 C-1976 75x5 C-1976 7x2.5C-1976 71x4.5 C-1976 75x6 C-1976 7x3C-1976 71x5 C-1976 76.2x1.9 C-1976 7x3.5C-1976 72.2x2.4 C-1976 76.2x2.4 C-1976 7x4C-1976 72.6x5.7 C-1976 76.6x5.7 C-1976 7x5C-1976 72.8x3.1 C-1976 76.8x3.1 C-1976 8.2x1.9C-1976 72.8x8.6 C-1976 76x2 C-1976 8.2x2.4C-1976 72x10 C-1976 76x2.5 C-1976 8.4x1.9C-1976 72x2 C-1976 76x3 C-1976 8.5x1C-1976 72x2.5 C-1976 76x3.5 C-1976 8.5x2C-1976 72x3 C-1976 76x4 C-1976 8.5x2.5C-1976 72x3.5 C-1976 76x4.5 C-1976 8.6x2.2C-1976 72x4 C-1976 76x5 C-1976 8.75x1.78C-1976 72x5 C-1976 76x6 C-1976 8.7x1.9C-1976 72x6 C-1976 77.2x2.4 C-1976 8.8x3.1C-1976 73.2x1.9 C-1976 77.5x2 C-1976 80.2x2.4C-1976 73.2x2.4 C-1976 77.8x3.1 C-1976 80.6x5.7C-1976 73.5x2 C-1976 77.8x8.6 C-1976 80.8x3.1C-1976 73.6x5.7 C-1976 77x2.5 C-1976 80x2C-1976 73.8x3.1 C-1976 77x3 C-1976 80x2.5C-1976 73x2 C-1976 77x3.5 C-1976 80x3C-1976 73x2.5 C-1976 77x4 C-1976 80x3.5C-1976 73x3 C-1976 77x5 C-1976 80x4C-1976 73x3.5 C-1976 78.2x1.9 C-1976 80x4.5C-1976 73x4 C-1976 78.2x2.4 C-1976 80x5C-1976 73x5 C-1976 78.6x5.7 C-1976 80x6C-1976 73x6 C-1976 78.8x3.1 C-1976 81.2x1.9C-1976 74.2x1.9 C-1976 78x2.5 C-1976 81.2x2.4C-1976 74.2x2.4 C-1976 78x3 C-1976 81.6x5.7C-1976 74.8x3.1 C-1976 78x3.5 C-1976 81.8x3.1C-1976 74x10 C-1976 78x4 C-1976 81x10C-1976 74x2 C-1976 78x5 C-1976 81x2C-1976 74x2.5 C-1976 78x6 C-1976 81x2.5C-1976 74x3 C-1976 79.2x2.4 C-1976 81x3C-1976 74x3.5 C-1976 79.5x3 C-1976 81x3.5C-1976 74x4 C-1976 79.8x3.1 C-1976 81x4C-1976 74x5 C-1976 79x2.5 C-1976 81x5C-1976 75.2x2.4 C-1976 79x3 C-1976 81x6C-1976 75.6x5.7 C-1976 79x3.5 C-1976 82.2x2.4

Seals 019

标准代码






ID × C/SC-1976 82.5x3 C-1976 86x2 C-1976 9.7x1.9C-1976 82.6x5.7 C-1976 86x2.5 C-1976 9.8x3.1C-1976 82.8x3.1 C-1976 86x3 C-1976 90.2x2.4C-1976 82.8x8.6 C-1976 86x3.5 C-1976 90.5x3C-1976 82x2.5 C-1976 86x4 C-1976 90.6x5.7C-1976 82x3 C-1976 86x5 C-1976 90.8x3.1C-1976 82x3.5 C-1976 87.2x2.4 C-1976 90x2C-1976 82x4 C-1976 87.8x3.1 C-1976 90x2.4C-1976 82x5 C-1976 87.8x8.6 C-1976 90x2.5C-1976 83.2x2.4 C-1976 87x2.5 C-1976 90x3C-1976 83.6x5.7 C-1976 87x3 C-1976 90x3.5C-1976 83.8x3.1 C-1976 87x3.5 C-1976 90x4C-1976 83.8x8.6 C-1976 87x4 C-1976 90x4.5C-1976 83x2.5 C-1976 87x4.5 C-1976 90x5C-1976 83x3 C-1976 87x5 C-1976 91.2x1.9C-1976 83x3.5 C-1976 88.6x5.7 C-1976 91.8x3.1C-1976 83x4 C-1976 88.8x3.1 C-1976 91x2C-1976 83x4.5 C-1976 88x2.5 C-1976 91x2.5C-1976 83x5 C-1976 88x3 C-1976 91x3C-1976 83x6 C-1976 88x3.5 C-1976 91x3.5C-1976 84.2x1.9 C-1976 88x4 C-1976 91x4C-1976 84.2x2.4 C-1976 88x5 C-1976 92.8x3.1C-1976 84.8x3.1 C-1976 88x6 C-1976 92.8x8.6C-1976 84x10 C-1976 89.8x3.1 C-1976 92x10C-1976 84x2 C-1976 89x2.5 C-1976 92x2C-1976 84x2.5 C-1976 89x3 C-1976 92x2.5C-1976 84x3 C-1976 89x3.5 C-1976 92x3C-1976 84x3.5 C-1976 89x4 C-1976 92x3.5C-1976 84x4 C-1976 89x5 C-1976 92x4C-1976 84x5 C-1976 8x1 C-1976 92x5C-1976 85.2x2.4 C-1976 8x1.5 C-1976 93.2x2.4C-1976 85.6x5.7 C-1976 8x2 C-1976 93.6x5.7C-1976 85.8x3.1 C-1976 8x2.5 C-1976 93.8x3.1C-1976 85x10 C-1976 8x3 C-1976 93x2.5C-1976 85x2 C-1976 8x3.5 C-1976 93x3C-1976 85x2.5 C-1976 8x4 C-1976 93x3.5C-1976 85x3 C-1976 8x5 C-1976 93x4.5C-1976 85x3.5 C-1976 9.2x1.9 C-1976 94.2x1.9C-1976 85x4 C-1976 9.2x2.4 C-1976 94.8x3.1C-1976 85x4.5 C-1976 9.5x1 C-1976 94x2.5C-1976 85x5 C-1976 9.5x2 C-1976 94x3C-1976 85x6 C-1976 9.5x2.4 C-1976 94x4C-1976 86.2x1.9 C-1976 9.5x2.5 C-1976 94x4.5C-1976 86.6x5.7 C-1976 9.6x2.2 C-1976 94x8C-1976 86.8x3.1 C-1976 9.6x2.4 C-1976 95.2x2.4

Seals 020

标准代码






ID × C/SC-1976 95x2 C-2005 103x5.3 C-2005 115x2.65C-1976 95x3 C-2005 103x7 C-2005 115x3.55C-1976 95x3.5 C-2005 104x1.8 C-2005 115x5.3C-1976 95x4.5 C-2005 104x7 C-2005 115x7C-1976 95x5 C-2005 105x2.65 C-2005 116x7C-1976 96.2x1.9 C-2005 105x3.55 C-2005 117x1.8C-1976 96x2 C-2005 105x5.3 C-2005 117x7C-1976 96x2.5 C-2005 106x1.8 C-2005 118x1.8C-1976 96x3 C-2005 106x2.65 C-2005 118x2.65C-1976 96x6 C-2005 106x3.55 C-2005 118x3.55C-1976 97.8x8.6 C-2005 106x5.3 C-2005 118x5.3C-1976 97x3 C-2005 106x7 C-2005 118x7C-1976 97x4 C-2005 107.5x5.3 C-2005 11x2.65C-1976 97x5 C-2005 107x7 C-2005 11x3.55C-1976 98.6x5.7 C-2005 108x7 C-2005 12.1x1.8C-1976 98.8x3.1 C-2005 109.4x5.3 C-2005 12.1x2.65C-1976 98x3 C-2005 109x2.65 C-2005 12.5x1.8C-1976 98x3.5 C-2005 109x3.55 C-2005 12.5x2.65C-1976 98x6 C-2005 109x5.3 C-2005 12.8x1.8C-1976 99x10 C-2005 109x7 C-2005 12.8x2.65C-1976 99x3 C-2005 10x1.8 C-2005 120x1.8C-1976 99x4.5 C-2005 10x2.65 C-2005 120x2.65C-1976 99x6 C-2005 10x3.55 C-2005 120x3.55C-1976 9x1 C-2005 11.2x1.8 C-2005 120x5.3C-1976 9x1.5 C-2005 11.2x2.65 C-2005 120x7C-1976 9x2 C-2005 11.6x1.8 C-2005 121x7C-1976 9x2.5 C-2005 11.6x2.65 C-2005 122x2.65C-1976 9x3 C-2005 11.8x1.8 C-2005 122x3.55C-1976 9x3.5 C-2005 11.8x2.65 C-2005 122x5.3C-1976 9x4 C-2005 110.4x3.55 C-2005 122x7C-1976 9x5 C-2005 110x1.8 C-2005 125x2.65C-2005 1.6x1.8 C-2005 110x3.55 C-2005 125x3.55C-2005 1.8x1.8 C-2005 110x5.3 C-2005 125x5.3C-2005 10.16x1.8 C-2005 110x7 C-2005 125x7C-2005 10.6x1.8 C-2005 111x7 C-2005 126.5x3.55C-2005 10.6x2.65 C-2005 112.3x5.3 C-2005 126x7C-2005 10.8x1.8 C-2005 112x1.8 C-2005 128x2.65C-2005 100x1.8 C-2005 112x2.65 C-2005 128x3.55C-2005 100x2.65 C-2005 112x3.55 C-2005 128x5.3C-2005 100x3.55 C-2005 112x5.3 C-2005 128x7C-2005 100x5.3 C-2005 112x7 C-2005 12x3.55C-2005 100x7 C-2005 113x5.3 C-2005 13.2x1.8C-2005 101x7 C-2005 113x7 C-2005 13.2x2.65C-2005 103x2.65 C-2005 114x3.55 C-2005 130x3.55C-2005 103x3.55 C-2005 114x7 C-2005 130x5.3

Seals 021

标准代码






ID × C/SC-2005 270x3.55 C-2005 30.7x3.55 C-2005 330x7C-2005 271x3.55 C-2005 300x3.55 C-2005 335x3.55C-2005 272x3.55 C-2005 300x5.3 C-2005 335x5.3C-2005 272x5.3 C-2005 300x7 C-2005 335x7C-2005 272x7 C-2005 303x5.3 C-2005 33x7C-2005 275x2.65 C-2005 303x7 C-2005 34.5x1.8C-2005 275x3.55 C-2005 304x3.55 C-2005 34.5x2.65C-2005 275x7 C-2005 305x5.3 C-2005 34.5x3.55C-2005 276x5.3 C-2005 306x5.3 C-2005 34.5x5.3C-2005 276x7 C-2005 307x3.55 C-2005 34.7x5.3C-2005 279x3.55 C-2005 307x5.3 C-2005 340x3.55C-2005 28.7x3.55 C-2005 307x7 C-2005 340x5.3C-2005 280x2.65 C-2005 30x1.8 C-2005 340x7C-2005 280x3.55 C-2005 30x2.65 C-2005 345x3.55C-2005 280x5.3 C-2005 30x3.55 C-2005 345x5.3C-2005 280x7 C-2005 30x5.3 C-2005 345x7C-2005 281x3.55 C-2005 31.5x1.8 C-2005 34x1.8C-2005 283x5.3 C-2005 31.5x2.65 C-2005 34x7C-2005 283x7 C-2005 31.5x3.55 C-2005 35.5x1.8C-2005 285x3.55 C-2005 31.5x5.3 C-2005 35.5x2.65C-2005 285x5.3 C-2005 310x3.55 C-2005 35.5x3.55C-2005 285x7 C-2005 310x5.3 C-2005 350x3.55C-2005 286x5.3 C-2005 311x5.3 C-2005 350x5.3C-2005 28x1.8 C-2005 311x7 C-2005 350x7C-2005 28x2.65 C-2005 315x3.55 C-2005 355x3.55C-2005 28x3.55 C-2005 315x5.3 C-2005 355x5.3C-2005 28x5.3 C-2005 315x7 C-2005 355x7C-2005 29.4x1.8 C-2005 31x2.65 C-2005 35x5.3C-2005 29.7X2.65 C-2005 32.5x1.8 C-2005 36.5x1.8C-2005 29.7x3.55 C-2005 32.5x2.65 C-2005 36.5x2.65C-2005 290x2.65 C-2005 32.5x3.55 C-2005 36.5x3.55C-2005 290x3.55 C-2005 32.5x5.3 C-2005 36.5x5.3C-2005 290x5.3 C-2005 320x3.55 C-2005 360x3.55C-2005 290x7 C-2005 320x5.3 C-2005 360x5.3C-2005 295x3.55 C-2005 320x7 C-2005 360x7C-2005 295x5.3 C-2005 325x3.55 C-2005 365x3.55C-2005 295x7 C-2005 325x5.3 C-2005 365x5.3C-2005 29x1.8 C-2005 325x7 C-2005 365x7C-2005 29x2.65 C-2005 32x2.65 C-2005 36x3.55C-2005 29x3.55 C-2005 33.5x1.8 C-2005 37.4x5.3C-2005 2x1.8 C-2005 33.5x2.65 C-2005 37.5x1.8C-2005 3.15x1.8 C-2005 33.5x3.55 C-2005 37.5x2.65C-2005 3.55x1.8 C-2005 33.5x5.3 C-2005 37.5x3.55C-2005 3.75x1.8 C-2005 330x3.55 C-2005 37.5x5.3C-2005 30.4x5.3 C-2005 330x5.3 C-2005 370x2.65

Seals 022

标准代码






ID × C/SC-2005 370x3.55 C-2005 40x3.55 C-2005 46.2x1.8C-2005 370x5.3 C-2005 40x5.3 C-2005 46.2x2.65C-2005 370x7 C-2005 41.2x1.8 C-2005 46.2x3.55C-2005 375x3.55 C-2005 41.2x2.65 C-2005 46.2x5.3C-2005 375x5.3 C-2005 41.2x3.55 C-2005 462x7C-2005 375x7 C-2005 41.2x5.3 C-2005 466x7C-2005 378x3.55 C-2005 41.5x2.65 C-2005 46x7C-2005 37x7 C-2005 410x5.3 C-2005 47.2x3.55C-2005 38.5x1.8 C-2005 412x7 C-2005 47.5x1.8C-2005 38.5x2.65 C-2005 418x7 C-2005 47.5x2.65C-2005 38.7x1.8 C-2005 41x7 C-2005 47.5x3.55C-2005 38.7x2.65 C-2005 42.3x1.8 C-2005 47.5x5.3C-2005 38.7x3.55 C-2005 42.3x2.65 C-2005 470x7C-2005 38.7x5.3 C-2005 42.3x3.55 C-2005 475x7C-2005 380x3.55 C-2005 42.3x5.3 C-2005 476x7C-2005 380x5.3 C-2005 42.5x1.8 C-2005 47x1.8C-2005 380x7 C-2005 42.5x2.65 C-2005 47x2.65C-2005 383x3.55 C-2005 42.5x3.55 C-2005 47x3.55C-2005 383x7 C-2005 42.5x5.3 C-2005 48.7x1.8C-2005 385x3.55 C-2005 425x7 C-2005 48.7x2.65C-2005 387x5.3 C-2005 429x7 C-2005 48.7x3.55C-2005 387x7 C-2005 42x1.8 C-2005 48.7x5.3C-2005 38x2.65 C-2005 42x5.3 C-2005 480x5.3C-2005 38x5.3 C-2005 43.5x5.3 C-2005 483x7C-2005 390x3.55 C-2005 43.7x1.8 C-2005 487x3.55C-2005 390x5.3 C-2005 43.7x2.65 C-2005 487x7C-2005 390x7 C-2005 43.7x3.55 C-2005 48x2.65C-2005 391x7 C-2005 43.7x5.3 C-2005 48x5.3C-2005 393x7 C-2005 430x5.3 C-2005 48x7C-2005 394.5x3.55 C-2005 430x7 C-2005 493x7C-2005 394x3.55 C-2005 433x7 C-2005 49x7C-2005 395x3.55 C-2005 437x5.3 C-2005 4x1.8C-2005 395x5.3 C-2005 437x7 C-2005 4x2.65C-2005 395x7 C-2005 43x5.3 C-2005 5.15x1.8C-2005 3x1.8 C-2005 443x7 C-2005 5.3x1.8C-2005 3x2.65 C-2005 445x5.3 C-2005 5.3x2.65C-2005 4.5x1.8 C-2005 44x1.8 C-2005 5.5x1.8C-2005 4.75x1.8 C-2005 450x5.3 C-2005 5.5x2.65C-2005 4.87x1.8 C-2005 450x7 C-2005 5.6x1.8C-2005 400x3.55 C-2005 456x3.55 C-2005 5.8x2.65C-2005 400x5.3 C-2005 456x7 C-2005 500x5.3C-2005 400x7 C-2005 45x1.8 C-2005 500x7C-2005 406x7 C-2005 45x2.65 C-2005 50x1.8C-2005 40x1.8 C-2005 45x3.55 C-2005 50x2.65C-2005 40x2.65 C-2005 45x5.3 C-2005 50x3.55

Seals 023

标准代码






ID × C/SC-2005 50x5.3 C-2005 59x1.8 C-2005 6x2.65C-2005 51.5x1.8 C-2005 5x1.8 C-2005 7.1x1.8C-2005 51.5x2.65 C-2005 5x2.65 C-2005 7.1x2.65C-2005 51.5x3.55 C-2005 6.3x1.8 C-2005 7.5x1.8C-2005 51.5x5.3 C-2005 6.7x1.8 C-2005 7.5x2.65C-2005 510x7 C-2005 6.9x1.8 C-2005 7.65x1.8C-2005 515x5.3 C-2005 6.9x2.65 C-2005 7.6x1.8C-2005 515x7 C-2005 600x7 C-2005 7.6x2.65C-2005 51x3.55 C-2005 60x1.8 C-2005 70x2.65C-2005 51x5.3 C-2005 60x2.65 C-2005 70x3.55C-2005 52x1.8 C-2005 60x3.55 C-2005 70x5.3C-2005 52x7 C-2005 60x5.3 C-2005 71x1.8C-2005 530x7 C-2005 60x7 C-2005 71x2.65C-2005 53x1.8 C-2005 61.5x2.65 C-2005 71x3.55C-2005 53x2.65 C-2005 61.5x3.55 C-2005 71x5.3C-2005 53x3.55 C-2005 61.5x5.3 C-2005 71x7C-2005 53x5.3 C-2005 61.8x1.8 C-2005 72x5.3C-2005 53x7 C-2005 61x2.65 C-2005 73x1.8C-2005 54.5x1.8 C-2005 62x7 C-2005 73x2.65C-2005 54.5x2.65 C-2005 63x1.8 C-2005 73x3.55C-2005 54.5x3.55 C-2005 63x2.65 C-2005 73x5.3C-2005 54.5x5.3 C-2005 63x3.55 C-2005 74x2.65C-2005 545x7 C-2005 63x5.3 C-2005 75x1.8C-2005 54x3.55 C-2005 63x7 C-2005 75x2.65C-2005 54x5.3 C-2005 64x7 C-2005 75x3.55C-2005 55x1.8 C-2005 65x1.8 C-2005 75x5.3C-2005 55x3.55 C-2005 65x2.65 C-2005 75x7C-2005 55x5.3 C-2005 65x3.55 C-2005 76x5.3C-2005 560x7 C-2005 65x5.3 C-2005 76x7C-2005 566x7 C-2005 66x3.55 C-2005 77.5x1.8C-2005 56x1.8 C-2005 66x7 C-2005 77.5x2.65C-2005 56x2.65 C-2005 67.9x3.55 C-2005 77.5x3.55C-2005 56x3.55 C-2005 67x1.8 C-2005 77.5x5.3C-2005 56x5.3 C-2005 67x2.65 C-2005 78x3.55C-2005 56x7 C-2005 67x3.55 C-2005 78x7C-2005 575x7 C-2005 67x5.3 C-2005 79x3.55C-2005 57x1.8 C-2005 68x2.65 C-2005 7x2.65C-2005 57x2.65 C-2005 68x3.55 C-2005 7x3.55C-2005 57x3.55 C-2005 68x5.3 C-2005 8.5x1.8C-2005 580x7 C-2005 68x7 C-2005 8.5x2.65C-2005 58x1.8 C-2005 69x1.8 C-2005 8.75x1.8C-2005 58x2.65 C-2005 69x2.65 C-2005 8.75x2.65C-2005 58x3.55 C-2005 69x3.55 C-2005 80x1.8C-2005 58x5.3 C-2005 69x5.3 C-2005 80x2.65C-2005 58x7 C-2005 6x1.8 C-2005 80x3.55

Seals 024

标准代码


ID × C/S标准代码Standard

内径×线径



ID × C/SC-2005 80x5.3 C-2005 90x1.8 C-2005 99x5.3C-2005 80x7 C-2005 90x2.65 C-2005 9x1.8C-2005 81x3.55 C-2005 90x3.55 C-2005 9x2.65C-2005 81x7 C-2005 90x5.3 C-2005 9x3.55C-2005 82.5x2.65 C-2005 90x7C-2005 82.5x3.55 C-2005 91x7C-2005 82.5x5.3 C-2005 92.5x1.8C-2005 82x2.65 C-2005 92.5x2.65C-2005 82x7 C-2005 92.5x3.55C-2005 83x7 C-2005 92.5x5.3C-2005 84x1.8 C-2005 93.7x5.3C-2005 85x1.8 C-2005 93x7C-2005 85x2.65 C-2005 95x1.8C-2005 85x3.55 C-2005 95x2.65C-2005 85x5.3 C-2005 95x3.55C-2005 85x7 C-2005 95x5.3C-2005 86x7 C-2005 96x7C-2005 87.5x1.8 C-2005 97.5x1.8C-2005 87.5x2.65 C-2005 97.5x2.65C-2005 87.5x3.55 C-2005 97.5x3.55C-2005 87.5x5.3 C-2005 97.5x5.3C-2005 87x3.55 C-2005 97x7C-2005 87x7 C-2005 98.4x1.8C-2005 88x7 C-2005 98x1.8C-2005 8x1.8 C-2005 98x3.55C-2005 8x2.65 C-2005 92.6x1.8C-2005 8x3.55 C-2005 92x3.55C-2005 9.25x1.8 C-2005 92x7C-2005 9.5x1.8 C-2005 93.4x1.8C-2005 9.5x2.65 C-2005 93.4x1.8C-2005 9.75x1.8 C-2005 98x7

Welcome to contact us for the right sizeEmail: [email protected]: 0086 0592 5775761Web: www.sealsmanufacturer.com

Seals 025

Documents

XIAMEN SEALS SELECTION GUIDE BOOK · 2018-11-12 · XIAMEN SEALS TECHNOLGOY served as a leading rubber component manufacturer in China, known for innovation and continuous improvement