16 24
Pos. BPos. A
X
GB
PK
F8
PX QT
7
3 423034
MENSOLE F8117
= =L
117
yy
PK3
PK1
160 160
QT + QB + QKP + QN1
QT + QB + QKP + QE
ABD
E
C
L1 = 12 maxL2 = 27 - L1
321
ø11
27L2 L1
DL Radiators Spa Treviso, via Seitz 47, 31100 - Italy
Headquarters: Moimacco (UD) via Nazionale 21, 33040 - Italy Tel.
+39 0432 705511 - Fax +39 0432705578
http://www.dlradiators.com
NUMBER OF BRACKETS
Up to Length 1600mm there are 4 back supports (2 brackets
needed); from Length 1800mm the radiator has got 6 supports
(therefore needs 4 brackets)
Dimensions
10 11 21 22 33
panel depth - excluding back supports A 63 63 85 100 157
total depth - from the back of the support to the front panel B
63 74,5 94 109 166
distance from the back support to the connection** C 16 40 52 59
59
distance from wall to the centre of the connection (mounting the
radiators on the GB brackets provided)*
D 34,5 56/64 67,5/75,5 75/83 75/83
total distance from the wall to the front panel (panel mounted
on the GP brackets provided as standard)*
E 68 90,5/98,5 110/118 125/133 182/190
De’Longhi Compact radiators can be connected with a two-pipe
connection as follows: top/bottom same side (all EN442 heat outputs
are calculated and verified with this type of connection),
top/bottom opposite side (the best way to connect radiators longer
than 1000 mm), bottom/bottom opposite side (this connection method
reduces heat output by about 10%).Two-pipe connection requires a
thermostatic valve (possibly with thermostatic head) and
lockshield.
The connection methods described here are symmetric.
ONE PIPETwO PIPE
DATA PER METER
(Model 10 mounted on D30 brackets)* The total distance varies
according to whether the GB bracket is mounted in position A or
position B (choice of depth)** Calculating the total size of the
panel (from the wall to the front panel) with the chosen wall
brackets: the useful length of the chosen bracket must
be added to this measurement (see brackets page).
HeightModel Feature 300 400 500 600 700 900
10Water content (l) 2,10 2,57 3,03 3,50 4,63 5,10
Weight (kg) 6,75 9,00 11,25 13,50 15,75 20,25
Heating surface (m2) 0,67 0,90 1,12 1,34 1,59 2,02
11Water content (l) 2,10 2,57 3,03 3,50 4,63 5,10
Weight (kg) 10,35 13,80 17,25 20,70 24,15 31,05
Heating surface (m2) 1,21 2,21 3,20 4,19 5,19 7,16
21Water content (l) 4,20 5,17 6,13 7,10 8,10 10,10
Weight (kg) 16,11 21,48 26,85 32,22 37,59 48,33
Heating surface (m2) 1,86 3,07 4,28 5,48 6,69 9,10
22Water content (l) 4,20 5,17 6,13 7,10 8,10 10,10
Weight (kg) 19,35 25,80 32,25 38,70 45,15 58,05
Heating surface (m2) 2,43 4,41 6,39 8,37 10,35 14,37
33Water content (l) 6,10 7,87 9,63 11,40 12,73 15,40
Weight (kg) 28,80 38,40 48,00 57,60 67,20 86,40
Heating surface (m2) 3,64 6,62 9,59 12,56 15,54 21,48
Cod.
588
0042
200
- 03/
2013
- w
ww.
tipog
rafia
.com
Connection
Technical Data
Fixing
yy
H300-400-500 = mm; H600 = mm; H700-900 = mm Y = 120 mm
yy
63
10059
15759
10112122
33
6312
◆ Top quality 1,25mm thick steel ideal for deep moulding
◆ 33,3 mm grooves
SECURITY◆Max. working pressure 10 bar◆ Test pressure 13 bar◆Max.
working temperature 110 °C◆ Screw-fastened side covers◆ Brackets
according to VDI6036 norm
(security requirements for the stability of the fastening
system)
PAINTING◆ Glossy (RAL 9016) and long-lasting
colour◆ High quality und high effectiveness
painting process (hot degreasing, iron-phosphatisation,
electrophoretic
dip coating, epoxy powder)
PACKAGING◆ PP corner protections◆ Tough cardboard stripes to
protect the edge◆ Heat shrink tape to protect against
damp
TYPES: 10-11-21-22-33 mm
HEIGHTS: 300-400-500-600700-900 mm
LENGTHS:
400-500-600-700-800-9001000-1100-1200-1400-16001800-2000-2300-2600-3000
mm
◆ 4 x 1/2” connections, internal thread◆ Top grille◆ Side covers
(except type 10) ◆ 1 blind cap 1/2” in the package, to be mounted◆
1 air vent 1/2” in the package, to be mounted◆ Welded back
supports◆ Brackets included in the package
Stock Characteristics
Quality
Design
