Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
TÜV Rheinland Industrie Service GmbH E-008-D-Rev22 Notifizierte Stelle für Druckgeräte, Kennnummer: 0035 Am Grauen Stein, D-51105 Köln
Zertifikat
Qualitätsmanagement-System
für Werkstoffhersteller
nach Richtlinie 2014/68/EU Zertifikat Nr.: 01 202 F/Q-02 0035 Name und Anschrift des Herstellers:
INTERFIT Avenue Joseph Cugnot –Z.I Grévaux les Guides B.P 10132 F- 59602 MAUBEUGE Cedex
Hiermit wird bescheinigt, dass der Hersteller ein QM-System eingeführt hat und anwendet. Dieses wurde gemäß der Richtlinie 2014/68/EU, Anhang I, Kap 4.3 in Bezug auf die im Geltungsbereich genannten Werkstoffe einer spezifischen Überprüfung unterzogen.
Geprüft nach Richtlinie 2014/68/EU:
QM-System nach EN 764-5, Abschnitt 4.2 und AD 2000-Merkblatt W0
Auditbericht Nr.:
F/Q-02 0035
Geltungsbereich:
Herstellung und Vertrieb von warmgeformten Einschweissbögen aus unlegierten Stählen wie WPL6, WPB, P235GH, P265NL, P265GH, WPHY52, 16Mo3 und Reduzierungen aus unlegierten Stählen wie WPL6, WPB P235GH, P265NL, P265GH, siehe Anlage zum Zertifikat
Fertigungsstätte/Lieferer:
INTERFIT Avenue Joseph Cugnot –Z.I Grévaux les Guides B.P 10132 F- 59602 MAUBEUGE Cedex
Gültig bis:
26. Mai 2020
Köln, 25. September 2018 i.V. Dipl.-Ing. Oliver Theisen
TÜV Rheinland Industrie Service GmbH E-008-D-Rev22 Notifizierte Stelle für Druckgeräte, Kennnummer: 0035 Am Grauen Stein, D-51105 Köln
Certificate
Quality-Assurance System
for Manufacturer of Materials
acc. to Directive 2014/68/EU Certificate no.: 01 202 F/Q-02 0035 Name and address of the manufacturer:
INTERFIT Avenue Joseph Cugnot –Z.I Grévaux les Guides B.P 10132 F- 59602 MAUBEUGE Cedex
Herewith we certify that the material manufacturer has established and applies a Quality Management System. The system was audited according to the European Directive 2014/68/EU, Annex I, Par. 4.3, with regard to the materials as listed in the scope of approval.
Tested acc. to Directive 2014/68/EU:
QM System acc. to EN 764-5, article 4.2 and AD 2000-Merkblatt W0
Audit report no.:
F/Q-02 0035
Area of validity:
Manufacturing and distribution of hot formed Elbows made of carbon steel as WPL6, WPB, P235GH, P265NL, P265GH, WPHY52, 16Mo3 and Reductions made of carbon steel as WPL6, WPB, P235GH, P265NL, P265GH, see annex to certificate
Manufacturing plant:
INTERFIT Avenue Joseph Cugnot –Z.I Grévaux les Guides B.P 10132 F- 59602 MAUBEUGE Cedex
Valid until:
May 26, 2020
Cologne, September 25, 2018 i.V. Dipl.-Ing. Oliver Theisen
TÜV Rheinland Industrie Service GmbH E-008-D-Rev22 Notifizierte Stelle für Druckgeräte, Kennnummer: 0035 Am Grauen Stein, D-51105 Köln
Certificat
Système Assurance-Qualité
Pour fabricant de matériaux
selon Directive 2014/68/EU
Certificat No.: 01 202 F/Q-02 0035 Nom et adresse du fabricant:
INTERFIT Avenue Joseph Cugnot –Z.I Grévaux les Guides B.P 10132 F- 59602 MAUBEUGE Cedex
L’office de certification certifie par la présente que le fabricant a établi et entretient un système assurance-qualité selon directive 2014/68/EU, annexe I, chap. 4.3. Ceci a été réalisé lors d’un audit avec évaluation spécifique pour les matériaux listés au domaine de validité annexé au présent certificat.
Evalué selon directive 2014/68/EU:
Système Assurance-Qualité selon EN 764-5, chap. 4.2 et AD 2000-Merkblatt W0
Rapport d’Audit No.:
F/Q-02 0035
Domaine d‘application:
Fabrication et commercialisation de Courbes à souder formées à chaud en WPL6, WPB, P235GH, P265NL, P265GH, WPHY52, 16Mo3 et Réductions à souder formées à chaud en WPL6, WPB, P235GH, P265NL, P265GH, voir l'annexe du certificate
Lieu de production:
INTERFIT Avenue Joseph Cugnot –Z.I Grévaux les Guides B.P 10132 F- 59602 MAUBEUGE Cedex
Ce certificat est valable jusqu’en :
26 mai 2020
Cologne, 25 septembre 2018 i.V. Dipl.-Ing. Oliver Theisen