Air Operated Drill Type: AK SERIES
① ②
④
③MODEL
Drilling angle
Dimensions(L x W x H) (mm)
Mass (kg)
Operation stand (kg)
Spindle speeds (rpm)
Torque(Max) (kN・m)
Thrust force (kN)
Balance force (kN)
Drill frame
Down the hole drill (mm)
Feed length (mm)
Down the hole drillwith outer casing (mm)
Air consumption
Disassembly (kg)
AK-01
free
φ65
7.84 {800kgf} (Max)
Air motor + Chain drive
Drill head: 65 Drill frame:125 Base: 40
1.23 {125kgf・m}
10~15㎥ /min x 1~1.5MPa
2190 x 660 x 980
Drive unit: 230
65
Drilling diameter φ106(Inside diameter φ67)Drill rod φ50, Outer casing φ89.1(φ106 Bit dia.)
0~30
7.84 {800kgf} (Max)
1400
AK-01
Machine Setting up
Construction Site
Machine Setting up
Anchor hole
Feed length is 3500mm
General View
【Air Kid (AK-01) Layout】
Double Tube Type System 【Ring Bit (106 x 89.1) Components】
Ring Bit Assy
Machine and Tubular Scaffolding
Double tube drilling
Drilling Drilling
Machine Setting up
① AK-01 Body
② Operation Stand
③ Air Compressor (10~15㎥ /min x 1~1.5MPa)
④ Tubular Scaffolding (Width 2.5m) (Machine 2.0m, Safety Aisle 0.5m)
Able to reduce running cost and time using air driving methodAir drilling
Drill head with strong air motorDrill head with reduction gear exerts great drilling torque
Makes it easy to drill into unstable stratum
USED FOR
Setting
Pilot Bit Reducer RodNew Type Down the Hole Hammer
Shield Casing