AÇOS E LIGAS PARA O SEGMENTO DE ÓLEO E GÁS
STEELS AND ALLOYS FOR THE OIL AND GAS SEGMENT
Aços e Ligas para Óleo & Gás• Construção Mecânica: 4340, F11, F22, 8630, 4130, 4140, 4330 (Similar ASTM)
• Ligas à base de Níquel: N06625, N07718, N06617, N08825 (Similar UNS)
• Endurecíveis por Precipitação: 17-4PH, 17-7PH, 13-8PH (Similar ASTM)
• Aços Inoxidáveis Martensíticos: 410, 420, 416 (Similar AISI), 1.4313 (Similar WNr)
• Aços Inoxidáveis Austeníticos: 304, 304L, 316, 316L, 317L, 321, 347 (Similar AISI), XM19 (ASTM A182)
• Aços Inoxidáveis Duplex e Super Duplex: 1.4460, 1.4462, 1.4410, 1.4501, 1.4507 (Similar WNr)
• Maraging: Maraging 250, Maraging 300
Steels and Alloys for Oil & Gas• Engineering Steel: 4340, F11, F22, 8630, 4130, 4140, 4330 (Similar ASTM)
• Nickel Base Alloys: N06625, N07718, N06617, N08825 (Similar UNS)
• Precipitation Hardening Steels: 17-4PH, 17-7PH,13-8PH (Similar ASTM)
• Martensitic Stainless Steels: 410, 420, 416 (Similar AISI), 1.4313 (Similar WNr)
• Austenitic Staintless Steels: 304, 304L, 316, 316L, 317L, 321, 347 (Similar AISI), XM19 (ASTM A182)
• Duplex and Super Duplex Stainles Steels: 1.4460, 1.4462, 1.4410, 1.4501, 1.4507 (Similar WNr)
• Maraging: Maraging 250, Maraging 300
Principais Aplicações - Main Applications
• Peças para Cabeça de Poço• Árvore de Natal• Manifold• Risers• PLEM/PLET• Conectores• Ferramentas para Perfuração• Barras em Aços e Ligas Especiais
Exploração de Óleo & Gás• Parts for Well Heads • Christmas Tree• Manifold • Risers • PLEM/PLET • Connectors • Drilling Tools • Steel and Specialty Alloy Bars
Oil & Gas Exploration
Ligas Especiais - Specialty Alloys
Aços Inoxidáveis Duplex e Super DuplexDuplex and Super Duplex Stainless Steels
SIMILARES - SIMILAR STANDARDSDimensões DimensionsASTM UNS DIN / Wnr.
VRC625ASTM B446
UNSN06625
DIN 17744Wnr. 2.4856
5.00 - 205.00
VATX750ASTMB637
N07750 Wnr. 2.4669 5.00 - 300.00
VAT286AASTM A660
Wnr. 1.4980 5.00 - 490.00
VAT617ASTMB166
N06617 Wnr. 24663a 5.00 - 205.00
VAT718AASTMB637
N07718 Wnr. 2.4668 5.00 - 205.00
VAT800HTASTMB408
N08811Wnr. 1.4876
1.49595.00 - 345.00
VRC400ASTMB164B564
N04400 Wnr. 2.4360 5.00 - 300.00
VRC825ASTMB425
N08825 Wnr. 2.4858 5.00 - 345.00
SIMILARES - SIMILAR STANDARDSDimensões Dimensions
Condições de Fornecimento
Supplying ConditionsASTM UNS Wnr. / DIN
N4460ASTM A 182
Gr F50 /ASTM A276
UNSS32900
Wnr. 1.4460DIN X3CrNiMoNbN
12.70 - 350.00 -
N4462ASTM A 182
Gr F51 /ASTM A276
UNSS31803
Wnr. 1.4462DIN 2CrNiMoN
12.70 - 350.00NORSOK MDS D47upon consultation
VF53ASTM A 182
Gr F53 /ASTM A276
UNSS32750
Wnr. 1.4410DIN X2CrNiMoN25-7-4
12.70 - 350.00NORSOK MDS D57upon consultation
N4501ASTM A 182
Gr F55 /ASTM A276
UNSS32760
Wnr. 1.4501DIN
2CrNiMoCuWN25-7-412.70 - 350.00
NORSOK MDS D57under consult
N4507ASTM A 182
Gr F61 /ASTM A276
UNSS32550
Wnr. 1.4507DIN
X2CrNiMoCuN25-6-312.70 - 350.00
NORSOK MDS D57upon consultation
• A linha de produtos da Villares Metals atende às normas de acordo com API 6A.• Condições diferenciadas sob consulta.
• Villares Metals’ product line meets the API 6A standards.• Special requirements upon consultation.
Aços para Beneficiamento - Engineering Steel
SIMILARES - SIMILAR STANDARDS
ASTM UNS AISI OutrosOthers
VM40 ASMT A332 (4340) G43400 4340SAE 4340 /AMS 6414
F11ASTM A182GRADE F11
(MOD.)
K11597K11572
-ASME SA387
Gr. 11
F22ASTM A182 GRADE F22
(MOD.)K21590 -
ASME SA387Gr. 22
VB30ASTM A322 (8630)ASTM A29 (8630)
G86300 8630 SAE 8630
VL30 ASTM A322 (4130) G41300 4130SAE 4130 /VGS 5.11.1
REV. 6
VL40ASTM A322 (4140) ASTM A646(4140)
G41400 4140 AMS 6349
VM30ASTM A322 (4330)
ASTM A29K23080 4330
EN 30B /AMS 6411
SIMILARES - SIMILAR STANDARDSDimensões DimensionsASTM
DINWnr.
OutrosOthers
V630ASTM - A564
(630)17-4 PH
1.4542
AMS5643
5.00 - 360.00
AMS5622
5.00 - 400.00
5.00 - 500.00
V631ASTM - A564 (631) 17-7 PH
1.4568 - 5.00 - 500.00
N4534ASTM - A564
(XM-13) PH 13-8 Mo
1.4534AMS5629
5.00 - 350.00
Endurecíveis por Precipitação - Precipitation Hardening Steels
Equipamentos Peso máx. (t) Características Básicas Qtde.
Torno Innobra 2 e 3 (CNC)
10ø máx. 900mm (sobre o carro)
ø máx. 1080mm (sobre o barramento)2
Torno Vertical Dorries (CNC)
25ø máx. 3400mm
Altura máx.: 1700mm1
Torno Romi Centur 180A (CNC)
40ø máx. 1500mm
Comprimento máx.: 8000mm1
Torno Romi Centur 180A (CNC)
40ø máx. 2030mm
Comprimento máx: 8000mm2
Torno Farrel 2 (CNC) 40ø máx. 1180mm (sobre o carro) Comprimento máx.: 13700mm
1
Trepanadora Promatek / Rocco
20ø máx. 1800mm
Furação máx.: 505mm Comprimento máx. (furação): 14000mm
2
Trepanadora Echea 8ø máx. 500mm
Furação máx.: ø165mm Comprimento máx. (furação): 7000mm
1
Fresadora WMW (CNC)
20Dimensões mesa: 2000 x 1800mm
Altura máx.: 1600mm1
Mandrilhadora 125 -
Peso máx . plataforma: 50 t Peso máx. mesa móvel: 12,5 t
Curso longitudinal: 5500mm Curso transversal: 500mm
Altura máx.: 2700mm
1
Mandrilhadora 160 -
Peso máx. plataforma: 50 t Peso máx. mesa móvel: 12,5 t Curso longitudinal: 7000mm Curso transversal: 500mm
Altura máx.: 3000mm
1
Mandriladoras Table Type TOS (CNC)
20
Curso longitudinal: 6000mm Curso transversal: 3200mm
Altura máx.: 3500mmDimensões mesa: 2 x 3m
1
Equipment Maximum Weight (t)
Basic Characteristics Qty.
Lathe Innobra 2 and 3 (CNC)
10ø máx. 900mm (over the car)
ø máx. 1,080mm (over the lathe bed)2
Vertical Dorries Lathe (CNC)
25ø máx. 3,400mm
Max height.: 1,700mm1
Romi Centur Lathe 180A (CNC)
40ø máx. 1,500mm
Max length: 8,000mm1
Romi Centur Lathe 180A (CNC)
40ø máx. 2,030mm
Max length: 8,000mm2
Farrel 2 Lathet (CNC) 40ø máx. 1,180mm (over the car)
Max length.: 13,700mm1
Promatek / Rocco Trepanning Machine
20ø máx. 1,800mm
Boring max.: 505mm Max length. (boring): 14,000mm
2
Echea 4 Trepanning Machine
8ø máx. 500mm
Max boring: ø165mm Max length (boring): 7,000mm
1
WMW Milling Cutter (CNC)
20Bed dimension: 2,000 x 1,800mm
Max height: 1,600mm1
Broaching Machine 125
-
Max weight: Platform: 50 t Movable bed max weight: 12,5 t
Longitudinal travel: 5,500mm Transverse travel: 500mm
Max height: 2,700mm
1
Broaching Machine 160
-
Max weight platform.: 50 t Movable bed max weight: 12,5 t
Longitudinal travel: 7,000mm Transverse travel: 500mm
Max weight: 3,000mm
1
Broaching Machine Table Type TOS (CNC)
20
Longitudinal travel: 6,000mm Transverse travel: 3,200mm
Max height: 3,500mmBed dimension: 2 x 3m
1
Relação de Equipamentos List of High Technology Equipment
Centro de Serviço de Usinagem - Machining Service Center
• Tornos• Fresas• Trepanadoras
• Lathes• Milling Cutters• Treppaning Machines
• Trefilas a Quente• Shaving • Endireitadeiras• Esmerilhadeiras
• Hot Drawing Benches• Shaving Machines• Straighteners• Grinders
Estamos capacitados a fornecer peças próximas do acabado e acabadas em aços e ligas especiais. Contamos com equipamentos de alta tecnologia.
We are prepared to supply near finished parts and finished parts in steels and specialty steels. We count on high technology equipment.
• Descascadeiras• Retíficas• Trefilas a Frio
• Peeling Machines• Centerless Grinders• Cold Drawing Benches
Aços Inoxidáveis Martensíticos - Martensitic Stainless Steels
Aços Inoxidáveis Austeníticos - Austenitic Stainless Steels
Aços Maraging - Maraging Steels
SIMILARES - SIMILAR STANDARDS
ASTM UNS AISI DIN / Wnr. OutrosOthers
N4313ASMT A182
Gr F6NMS41500 -
Wnr. 1.4313DIN X3CrNiMo13-4
-
VC140ASTM A276 (410)
ASTM A182/ Gr F6aS41000 410
Wnr. 1.4006DIN X12Cr13
NBR 5601SAE 51410
VC150 ASTM A276 (420) S42000 420Wnr. 1.4021DIN X20Cr13
NBR 5601Type 420
V416 ASTM A582 (416) S41600 416Wnr. 1.4005
DIN X12CrS13
NBR 5601AMS 5610L
Type II
SIMILARES - SIMILAR STANDARDSDimensõesDimensionsASTM UNS AISI DIN / Wnr.
V304UFASTM A182 / Gr F304
ASTM A276S30400 304
Wnr. 1.4301DIN X5CrNi18-10
5.00 - 762.00
V304XLUFASTM A182 / Gr F304L
ASTM A276S30403 304L
Wnr. 1.4307DIN X2CrNi18-9
5.00 - 762.00
V316UFASTM A182 / Gr F316
ASTM A276S31600 316
Wnr. 1.4401DIN X5CrNiMo17-12-2
5.00 - 762.00
V316XLUFASTM A182 / Gr F316L
ASTM A276S31600 316L
Wnr. 1.4404DIN X2CrNiMo17-12-2
5.00 - 762.00
V317LASTM A182 / Gr F317L
ASTM A276S31703 317L
Wnr. 1.4449DIN X3CrNiMo18-12-3
5.00 - 762.00
V321ASTM A182 / Gr F321
ASTM A276S32100 321
Wnr. 1.4541DIN X6CrNiTi18-10
5.00 - 654.00
V347SIASTM A182 / Gr F347
ASTM A276S34700 347
Wnr. 1.4543DIN X6CrNiTi18-10
5.00 - 762.00
SIMILARES - SIMILAR STANDARDSDimensões DimensionsASTM UNS AMS MIL
VART250(MARAGING 250)
ASTM A579GR. 72
UNSK92890
AMS6512
MIL-S-46850D 5.00 - 350.00
VART300(MARAGING 300)
ASTM A579GR. 73
UNSK93120
AMS6514
MIL-S-46850D 5.00 - 350.00
VXM19ASTM A276/ ASTM A479
Gr XM19S20910
AMS6514
MIL-S-46850D 5.00 - 152.40
• A linha de produtos da Villares Metals atende às normas de acordo com API 6A.• Condições diferenciadas sob consulta.
• Villares Metals’ product line meets the API 6A standards.• Special requirements upon consultation.
ProdutoProduct
FormaShape
Dimensões e PesoDimensions and Weight
Tolerâncias (mm)(Peças Desbastadas)
Tolerances (mm)(Rough Machined)
LimitaçõesRestrictions
AnéisRings
(H < D)
D = 450 a 3,000mmDi ≤ 2,000
H = 130 a 1,420mmPeso (Weight) ≤ 20,000 kg
D => +3/-0Di => +0/-3H => +10/-0
Soma de diâmetro interno e espessura deve ser ≤ 2200mm.Peças com diâmetro superior a 1900mm somente podem ser
fornecidas sem tratamento (sob consulta) ou com tratamento térmico de normalização. Peças com diâmetro superior a 2000mm somente
podem ser fornecidas com altura superior a 200mm.
Sum of inner diameter and thickness must be = 2,200mm. Parts with external diameter larger than 1,900mm can only be supplied
without heat treatment (upon consultation) or normalized. Parts with external diameter larger than 2,000mm can only be supplied
with inner diameter larger than 200mm.
BuchasSleeves(L > D)
D = 500 a 2,600mmDi = 380 a 2,000
L ≤ 4,300mmPeso (Weight) ≤ 20,000 kg
D => +3/-0Di => +0/-3L => +10/-0
Soma de diâmetro interno e espessura deve ser ≤ 2200mm.Peças com diâmetro interno maior que 650mm somente podem
ser fornecidas com comprimento máximo de 2500mm.Peças com comprimento maior que 2000mm somente podemser fornecidos com diâmetro interno com acabamento bruto
(sob consulta).
Sum of inner diameter plus thickness must be = 2,200mm.Parts with inner diameter larger than 650mm can only be supplied with length up to 2,500mm. Parts with length larger than 2,000mm can only
be supplied with inner diameter in the as forged condition(upon consultation).
Esboços MaciçosSolid Blanks
D = 127 a 1,600mmL ≤ 12,000mm
Peso (Weight) ≤ 22,000 kg
D => +3/-0L => +10/-0
Peças com diâmetro superior a 650mm e comprimento superior a 7400mm somente podem ser fornecidas sem tratamento térmico (sob
consulta) ou com tratamento térmico de normalização.
Parts with diameter larger than 650mm and length larger than 7,400mm can only be supplied without heat treatment (upon consultation)
or normalized.
Eixos FlangeadosFlanged Shafts
D = 400 a 1,600mmD1 ≥ 250mm
L ≤ 12,000mmPeso (Weight) ≤ 20,000 kg
D => +3/-0L => +10/-0
Peças com diâmetro superior a 650mm e comprimento superior a 7400mm somente podem ser fornecidas sem tratamento térmico
(sob consulta) ou com tratamento térmico de normalização.
Parts with diameter larger than 650mm and length larger than 7,400mm can only be supplied without heat treatment (upon consultation) or
normalized.
Esboços FuradosHollow Blanks
D = 127 a 1,600mmDi = 65 a 505mm
L ≤ 14,000mmPeso (Weight) ≤ 20,000 kg
D => +3/-0Di => +/-1,5L => +10/-0
Soma de diâmetro interno e espessura deve ser ≤ 2200mm.Peças com diâmetro superior a 1900mm somente podem ser
fornecidas sem tratamento (sob consulta) ou com tratamento térmico de normalização. Peças com diâmetro superior a 2000mm somente
podem ser fornecidas com altura superior a 200mm.
Sum of inner diameter and thickness must be = 2,200mm. Parts with external diameter larger than 1,900mm can only be supplied
without heat treatment (upon consultation) or normalized. Parts with external diameter larger than 2,000mm can only be supplied
with height about 200mm.
Di D
L
H
D
D
L
D
L
Di
Di
L
D
Peças esboçadas com acabamento bruto e sem tratamento térmico podem ser fornecidas, sob consulta, com peso máximo até 28000 kg e comprimento de até 18000mm, dependendo da combinação entre dimensões e comprimentos. Os dados constantes nesta tabela são orientativos. As dimensões podem variar em função das combinações entre tipo de aço, perfil e tratamento térmico.
Solid blanks in the as forged condition and without heat treatment can be supplied upon consultation, up to 32,000 kg and length up to 18,000mm, depending on the relation between sections and lengths. The data in this table are only for guidance. The dimensions can vary as a function of the combinations between grade, shape and heat treatment.
ProdutoProduct
FormaShape
Dimensões e PesoDimensions and Weight
Tolerâncias (mm)(Peças Desbastadas)
Tolerances (mm)(Rough Machined)
LimitaçõesLimitations
Barras RedondasRound Bars
D = 127 a 1,420mmL ≤ 14,000mm (torneado / turned)
D = 142 a 1,480mmL ≤ 18,000mm (bruto de forja / as forged)
Peso (Weight) ≤ 24,000 kg
D ≤ 240 => +2/-0D > 240 => +3/-0
L => +10/-0
Barras com diâmetro superior a 650mm e comprimento superior a 7400mm somente podem ser fornecidas sem tratamento térmico (sob
consulta) ou com tratamento térmico de normalização ou alívio de tensões (comprimento máx. 12000mm). Para barras de diâmetro até
215mm, comprimento máximo de fornecimento 14000mm.
Bars with diameters larger than 650mm and length longer than7,400 mm can only be supplied without heat treatment (upon
consultation) or normalized or stress relieved (length up to 12,000mm).Bars with diameter up to 215mm can only be supplied
with a length up tto 14,000mm.
Barras QuadradasSquare Bars
T = 130 a 1,250mm L ≤ 12,000mm
(usinado / machined)Peso (Weight) ≤ 22,500 kg
T => +3/-0L => +10/-0
Barras com espessura superior a 650mm e comprimento superior a 7400mm somente podem ser fornecidas sem tratamento térmico
(sob consulta) ou com tratamento térmico de normalização ou alívio de tensões.
Bars with thickness larger than 650mm and length longer than7,400mm can only be supplied without heat treatment (upon
consultation) or normalized or stress relieved.
Barras ChatasFlat Bars
T = 130 a 1,250mmW = 130 a 2,300mm
L ≤ 12,000mm(usinado / rmachined) (*)
Peso (Weight) ≤ 22,500 kg
T => +3/-0W => +3/-0L => +10/-0
Barras com espessura ou largura superior a 650mm e comprimento superior a 7400mm somente podem ser fornecidas sem tratamento térmico (sob consulta) ou com tratamento térmico de normalização
ou alívio de tensões.(*) Barras com largura acima de 1250mm devem ter área máxima
igual a de uma barra quadrada de 1250mm.
Bars with thickness or width larger than 650mm and length longer than 7,400mm can only be supplied without heat treatment (upon
consultation) or normalized or stress relieved.(*) Bars with width larger than 1,250mm must have a maximum area
equal to a square bar area of 1,250mm.
Barras TrepanadasHollow Bars
D = 203 a 1,300mmDi = 65 a 505
T ≥ 50mmL ≤ 14,000mm
Peso (Weight) ≤ 23,000 kg
D ≤ 240 => +2/-0D > 240 => +3/-0
Di => +/-1,5L => +10/-0
A dimensão dos furos depende das ferramentas disponíveis e das dimensões das peças, mas de forma geral pode variar de 65 a 505mm. Furos menores podem ser fornecidos, sob consulta, comprando usinagem externa. Barras com diâmetro superior a
650mm e comprimento superior a 7400mm somente podem ser fornecidas sem tratamento térmico (sob consulta) ou com tratamento
térmico de normalização ou alívio de tensões.
The dimension of the holes depends on the available tools and the dimension of the parts, but, in general, it varies from 65 to 505mm.
Smaller holes can be supplied upon consultation, by subcontracting other machine shops. Bars with diameter larger than 650mm and length larger than 7,400mm can only be supplied without heat treatment (upon consultation) or normalized or stress relieved.
DiscosDisks
(H < D)
D = 450 a 2,340mmH = 130 a 1,420mm
Peso (Weight) ≤ 22,500 kg
D => +3/-0H => +10/-0
Peças com diâmetro entre 900 e 2340mm podem ser fornecidas com altura inferior a 175mm ou superior a 1420mm, sob consulta.
Peças com diâmetro superior a 1900mm somente podem ser fornecidas sem tratamento (sob consulta) ou com tratamento térmico
de normalização
Parts with diameter from 900 to 2,340mm can only be supplied with a height smaller than 175mm and larger than 1,420mm, upon consultation. Parts with diameter larger than 1,900mm can only be
supplied normalized.
D
L
L
T
T
L
T
W
Di
T
D
L
H
D
Limitações Peças Forjadas - Forged Parts Restraints
Certificações - Quality System Management
• ISO 9001: 2008 - Aplicação Geral.
• ISO/ TS 16949: 2009 - Aplicação Automobilística.
• Ü - Norm - Aços Inoxidáveis Austeníticos para aplicação em
Componentes Estruturais.
• AD 2000/WO/TRD100 - Aplicação de Partes Pressurizadas.
Componentes de Vasos de Pressão.
• Directive 97/23/EC - Aplicação em Materiais para Vasos de Pressão.
• AS 9100 / NBR 15100:2004 - Aplicação Aeronáutica.
• EMBRAER GQP/SQF - Aplicação Aeronáutica.
• ISO 14001 - Aplicação Ambiental.
• NADCAP - Aplicação em Tratamento Térmico e Ensaios
Não Destrutivos.
• NORSOK - M650 - Aplicação Óleo & Gás.
• ISO 9001: 2008 - General Application. • ISO/ TS 16949: 2009 - Automotive Application. • Ü - Norm - Austenitic Stainless Steels for Structural Component
Application.
• AD 2000/WO/TRD100 - Pressurized Parts Application. Pressure Vessel
Components.
• Directive 97/23/EC - Austenitic Stainless Steels for Pressure Vessel
Components.
• AS 9100 / NBR 15100:2004 - Aerospace Application. • EMBRAER GQP/SQF - Aerospace Application. • ISO 14001 - Environmental Application.
• NADCAP - Applicaton in Heat Treatment and Non Destructive Testing.
• NORSOK - M650 - Oil & Gas Application.
A linha de produtos da Villares Metals atende às normas de acordo com API 6A.Villares Metals’ product line meets the API 6A standards.
Centro de Distribuição e Serviços - Distribution Center and Services
O Centro de Distribuição e Serviços da Villares Metals, maior distribuidor de aços ferramenta da América Latina, complementa sua linha de produtos com aços e ligas para aplicações especiais, focando os segmentos de óleo e gás, química e petroquímica e geração de energia, como exemplo:
Ligas de Níquel: Inconel 625 e 718
Aços Inoxidáveis: Duplex e Super Duplex
Endurecíveis por Precipitação, PH: 17-4PH, 13-8PH
Aços para Beneficiamento:• SAE 8630 (VB30PET)• SAE 4130 (VL30CAFO)• SAE 4140 (VL40CFO)• SAE 4340 (VM40FO)
Villares Metals’ Distribution Center and Services, the largest tool steel distributor in Latin America, complements its line of products with steels and alloys for special applications, focusing on sectors such as oil and gas, chemical and petrochemical
and energy generation, as shown in the examples below:
Nicke base alloys: Inconel 625 and 718 Stainless steels: Duplex and Super Duplex
Precipitation hardening steels, PH: 17-4PH, 13-8PH
Engineering Steels: • SAE 8630 (VB30PET)
• SAE 4130 (VL30CAFO) • SAE 4140 (VL40CFO) • SAE 4340 (VM40FO)
Villares Metals has implemented a stock program in its local warehouse to improve competitiveness and lead time of the Brazilian supply chain with focus on:
Alloy 625 and 718 Duplex and Super Duplex
PH-Grades: 17-4PH, 15-5PH, 13-8PH Engineering Steels:
• SAE 8630 (VB30PET) • SAE 4130 (VL30CAFO)
• SAE 4140 (VL40CFO) • SAE 4340 (VM40FO)
Stock can be made available for Export Markets.
The Villares Metals’ Heat Treatment Service Center offers complete solutions in Heat Treatment. It has last generation and high technology equipment, coupled with an efficient automatic control system, ensuring a perfect execution of the different thermal cycles. The correct selection of steel grade and its ideal heat treatment are required for maximum tool yield. For your convenience and greater tooling performance, our customers can count on Steel Grade and Heat Treatment from the same supplier.
Additional Services
• Pick-up and return of material within a 150 km radius
• Hardness, tensile strength and impact testing
• Metallographic analyses
• Failure analyses of dies and tools
• Technical services and application services
• Heat treatment reports
• Technical seminars for customers
Basic Services • Vacuum furnace quenching
• Controlled atmosphere quenching
• Vacuum tempering
• Tempering in neutral atmosphere
• Annealing
• Solubilization under vacuum
• Ageing
• Sub-zero
• Stress relieving
• Plasma nitriding
Heat TreatmentTratamento TérmicoO Centro de Serviços de Tratamento Térmico Villares Metals oferece soluções completas em Tratamento Térmico. Dispõe de equipamentos de última geração e alta tecnologia, aliados a um eficiente sistema automatizado de controle, garantindo a perfeita realização dos diversos ciclos térmicos. A seleção correta do aço e seu perfeito tratamento térmico são requisitos para o máximo rendimento das ferramentas. Para maior comodidade e garantia superior do ferramental, nossos clientes podem contar com Aço e Tratamento Térmico do mesmo fornecedor. Conheça os serviços oferecidos:
Serviços Adicionais
• Coleta e devolução do material num raio de 150 km
• Ensaio de dureza, tração e impacto
• Análises metalográficas
• Análises de falha de matrizes e ferramentas
• Assessoria técnica e aplicação
• Informes de tratamento térmico
• Seminários técnicos para clientes
Serviços Básicos
• Têmpera em fornos a vácuo
• Têmpera sob atmosfera controlada
• Revenimento a vácuo
• Revenimento em atmosfera neutra
• Recozimento
• Solubilização a vácuo
• Envelhecimento
• Subzero
• Alívio de tensões
• Nitretação a plasma
Ago
sto/20
14
Rua Alfredo Dumont Villares, 155Jardim Santa Carolina - Sumaré/SPBrasil | CEP 13178-902
0800 19 05770800 707 0577
55 19 3303.8149
[email protected]@villaresmetals.com.brwww.villaresmetals.com.br