ARKU Maschinenbau GmbHSiemensstr. 11, 76532 Baden-Baden, GermanyPhone: +49 72 21 / 50 09-0 Fax: +49 72 21 / 50 [email protected], www.arku.com
single-sided
from 0.5 to 25 mm
250 mm
0.2 to 6 m/min.
approx. 3,500 kg
1,800 x 2,000 x 2,000 mm
EdgeBreaker® 1000
Processing:
Material thickness:
Max. passageway width:
Feed rate:
Machine weight:
Dimensions:
EdgeBreaker® 1000Deburring and edge-rounding of small parts Deburring and edge-rounding of small parts
The EdgeBreaker® 1000 deburrs and edge rounds punched and laser cut parts. If desired, you can also achieve your required surface finish.
V.1
- Ju
ne 2
019
The specialist for small parts. Small parts can be deburred, edge rounded and finished at a low cost. This is all possible with the EdgeBreaker® 1000. The machine was developed in close collaboration with our customers precisely for this task. The result is a sophisticated machine concept with great versatility.
Integrated: the EdgeBreaker® 1000 comes included with a wet dust extraction unit.
Punched and laser cut parts before and after processing with the EdgeBreaker® 1000.
Modular designDepending on your requirements, you can configure the processing units as needed. Providing you flexibility for the future.