BAUER BG 18 HGroßdrehbohrgerätRotary Drilling Rig
Geräteträger BT 50Base Carrier BT 50
Pre
miu
mL
ine
905-626-1_02-2017_BG18H.qxd 25.03.2017 14:21 Uhr Seite 1
BG 18 H (BT 50) © BAUER Maschinen GmbH, 2/2018
Bohrverfahren mitSerienausstattung:Kellybohren (ohne Verrohrungsmaschine)
SOB-Verfahren (hydraulisch undelektrisch vorgerüstet)
FDP Verdrängerbohren (hydraulischund elektrisch vorgerüstet)
Drilling processes withstandard equipment:Kelly drilling (without casing oscillator)
CFA drilling (pre-equipped withhydraulic and electric installations)
FDP Full-Displacement-Piling (pre-equipped with hydraulic andelectric installations)
Abmessungen Dimensions
Die BG 18 H, ein Gerät mit einem Einsatz-gewicht von ca. 52,0 t dient zur Herstellungvon
• verrohrten Bohrungen (Eindrehen desBohrrohres mit dem Drehgetriebe odermit angebauter Verrohrungsmaschine)
• unverrohrten, flüssigkeitsgestütztenBohrungen
• Bohrungen mit langer Hohlschnecke(SOB) – mit oder ohne Kellyverlängerung
• Sonderverfahren wie VdW-Bohren,Verdrängerbohrungen
The BG 18 H rotary drilling rig has anoperating weight of approx. 52.0 t. It isideally suited for:
• Drilling cased boreholes (installation ofcasing by rotary drive or optionally byhydraulic oscillator – both are poweredby the drilling rig)
• Drilling uncased deep boreholes that arestabilised by drilling fluids
• Drilling boreholes with long hollow stemaugers (CFA system), with or withoutkelly extensions
• Special drilling systems, such as FOWpiles, displacement piles
Hub
/ S
troke
850
0
17230
19130
3230
11730
0
3310 - 4510 *
4750
1080
R 3200
900
BK
200
/368
/3/2
4
* abhängig von der Bohrausrüstung
depending on the drilling equipment
905-626-1_02-2017_BG18H.qxd 25.03.2017 14:21 Uhr Seite 2
Technische Daten Technical specifications
© BAUER Maschinen GmbH, 2/2018 BG 18 H (BT 50)
Gesamthöhe Overall height 19.130 mm
Einsatzgewicht, ca. Operating weight (approx.)(mit Kelly BK200/368/3/24) (with Kelly BK200/368/3/24) 52.000 kg
Drehantrieb Rotary drive KDK 180 KL KDK 180 SL
Drehmoment (nominal) bei 300 bar Torque (nominal) at 300 bar 181 kNm 178 kNm
Drehzahl max. Speed of rotation (max.) 31 U/min (rpm) 56 U/min (rpm)
Vorschubwinde Crowd winch
Druckkraft und Zugkraft, effektiv /nominal Crowd force push/pull, effective / nominal 200 / 256 kN
Druckkraft /Zugkraft Crowd force push/pullgemessen am Drehteller KDK measured at the casing drive adapter on the rotary drive 170 / 156 kN
Hub (Kellysystem) Stroke (kelly system) 8.500 mm
max. Schlittenhub max. stroke of sledge 13.950 mm
Geschwindigkeit (ab/auf) Speed (down/up) 8,5 / 8,5 m/min
Schnellgang (ab/auf) Fast speed (down/up) 32 / 32 m/min
Hauptwinde Main winch
Windenklasse Winch classification M6 / L3 / T5
Zugkraft (1. Lage), effektiv / nominal Single line pull (1st layer), effective / nominal 140 / 175 kN
Seildurchmesser Rope diameter 22 mm
Windengeschwindigkeit Line speed max. 80 m/min
Hilfswinde Auxiliary winch
Windenklasse Winch classification M6 / L3 / T5
Zugkraft (1. Lage), effektiv / nominal Single line pull (1st layer), effective / nominal 55 / 70 kN
Seildurchmesser Rope diameter 15 mm
Windengeschwindigkeit Line speed (max.) 55 m/min
Mastneigung Mast inclination
nach hinten / vorne / quer Backward / forward lateral 15° / 5° / +-5°
Bohrgerät Drilling RigSerienausstattung• Drehgetriebe KDK 180 KL (Konstantgetriebe)• Einteiliger Mast• Hauptwinde mit hydraulischer Freilaufsteuerung• Haupt- und Hilfswinde mit Spezialrillung• Hubendschalter für Haupt- und Hilfswinde• Wirbel für Hauptseil• Vorschub schnell / langsam• Schwenk- und höhenverschiebbarer Anschlagpunkt für
Haupt- und Hilfsseil
Zusatzausstattung• Drehgetriebe KDK 180 SL (Schaltgetriebe)• Mehrteiliger Mast• Erweiterungspaket Low Head• Wirbel für Hilfsseil• Mastabstützung• Kellyablage• Obere Kellyführung• Zentralschmierung• Betonierleitung• Anbausatz Bremsmechanik für Automatikdrehteller• Verrohrungsmaschinenanbau
(BV 1180 HD-03 / 1300 L-03)
Standard equipment• Rotary drive KDK 180 KL (single gear drive)• One-sectional mast• Main winch with hydraulically operated freewheeling• Main and auxiliary winch with special grooving• Hoist limit switch on main and auxiliary winches• Swivel for main rope• Crowd in fast or slow mode• Pivoted and height adjustable anchor points for main and
auxiliary ropes
Optional equipment• Rotary drive KDK 180 SL (multi gear drive)• Segmental mast• Low Head extension package• Swivel for auxiliary rope• Mast support unit• Kelly transport support• Upper kelly guide• Central lubrication system• Concrete line• Mechanical attachment for automatic casing drive adapter• Oscillator attachment
(BV 1180 HD-03 / 1300 L-03)
905-626-1_02-2017_BG18H.qxd 25.03.2017 14:21 Uhr Seite 3
BG 18 H (BT 50) © BAUER Maschinen GmbH, 2/2018
Technische Daten Technical specifications
Trägergerät Base carrierSerienausstattung• Leerlaufautomatik (zur Verbrauchsoptimierung)• Motordiagnostiksystem• Diagnoseleiste für hydraulische Funktionen• Abnehmbares Gegengewicht• Verzurraugen an Raupenträgern• Aufstiegsleiter zum Oberwagen• Bordbeleuchtungssatz• Bordwerkzeugsatz• Elektrische Betankungspumpe• Moderne, ergonomische Fahrerkabine mit FOPS Standard
mit zusätzlichem Dachschutzgitter• Klimaanlage• Radio mit MP3, USB und Bluetooth-Freisprecheinrichtung• Trittroste neben der Kabine• Premium Fahrersitz• 2 Kameras zur Rückraumüberwachung
Zusatzausstattung• Kompressor (1000 l/min Saugleistung)• Generator (13 kVA)• Bioölbefüllung• Fernbedienung Basic• Standheizung mit Zeitschaltuhr• Trittroste vor der Kabine• Frontschutzgitter• Klimaautomatik• Zusatzgegengewicht 2,25 t• Kältepaket• Absturzsicherung am Oberwagen• Arbeitsscheinwerfer LED
Standard equipment• Automatic idling mode (to optimise fuel consumption)• Engine diagnostic system• Diagnostic panel for hydraulic functions• Removable counterweight• Transport securing lugs on crawler units• Access ladder on uppercarriage• On-board lighting set• On-board tool set• Electric refuelling pump• Modern, ergonomic operator cab, FOPS compliant with
additional protective roof guard• Air conditioning system• Radio with MP3, USB and Bluetooth c/w hands-free kit• Catwalk on side of operator's cab• Premium comfort seat• 2 cameras for rear area surveillance
Additional equipment• Compressor (1000 l/min capacity)• Generator (13 kVA)• Bio-degradable oil• Remote control basic• Independent cab heater with time switch• Catwalk in front of cab• Front screen guard• Climatronic• Additional counterweight 2.25 t• Arctic kit• Guardrails upper level• LED spotlights
Mess- und Steuerungstechnik Measuring and control equipmentSerienausstattung• Komfortpaket
– Hauptwinde mit elektronischer Seilkraftmessung– Schlappseilabschaltung– Wirbelaufstellautomatik– Drehzahlmessung KDK– Anpressdruckregelung Kelly– Vorschubgeschwindigkeitssteuerung
• Bauer B-TRONIC 3.1 elektronisches Steuerungs-, Kontroll-und Visualisierungssystem
• SPS-Rechner für alle elektrisch angesteuerten Funktionen• Mastneigungsmessung in x/y Richtung (Anzeige digital/
analog)• Mastautomatik (automatische Vertikalstellung)• Hilfswinde mit hydraulischer Seilkraftmessung• Tiefenmessung an der Hauptwinde• Wegmessung an der Vorschubwinde• Überlastschutz Hauptseil• Vorschubwegüberwachung• Elektronische Begrenzung der Mastausladung• Schockierfunktion• DTR Modul
Zusatzausstattung• Kellyvisualisierung• Hilfswinde mit elektronischer Seilkraftmessung• Abbohr- und Ziehautomatik für „Single Pass“ Verfahren• B-APS satellitengestütztes Positioniersystem
Standard equipment• Comfort package
– Main winch with electronic load sensing– Slack rope prevention– Automatic swivel alignment function– Speed measuring device on KDK– Automatic crowd control– Crowd speed control
• B-TRONIC 3.1 Electronic monitoring-, control- andvisualizationsystem
• PLC processor for all electrically actuated functions• Mast inclination measurement on x/y axes (digital/analog
display)• Automatic vertical mast alignment• Hydraulic load sensing on auxiliary winch• Depth measuring device on main winch• Distance measuring device on crowd winch• Overload protection main rope• Crowd stroke monitoring• Electronic mast reach limiter• One-directional spoil discharge function• DTR module
Optional equipment• Kelly visualization• Electronic load sensing on auxiliary rope• Automatic drilling and extraction control 'Single Pass'.• B-APS satellite-based positioning system
905-626-1_02-2017_BG18H.qxd 25.03.2017 14:21 Uhr Seite 4
© BAUER Maschinen GmbH, 2/2018 BG 18 H (BT 50)
1750
2260
1390
270
490
1000
600
970
900
420
1580
Drehgetriebe Rotary drive
Berechnung mit 230 kW MotorCalculation with 230 kW engine
Serienausstattung:• integriertes Kellydämpfungssystem• Gleitleisten sind ohne Demontage
des Drehgetriebes auswechselbar• auswechselbare Mitnehmerleisten• Kardangelenk• Hydraulische Verbindungen mit
Schnellkupplungen• 3 einstellbare Betriebsmodi (siehe
Diagramme)• Transportstützen• Hebegeschirr
Standard equipment:• Integrated kelly damping system• Wear pads exchangeable without
removal of rotary drive• Exchangeable kelly drive keys• Cardanic joint• Quick-release couplers on hydraulic
hoses• 3 selectable modes of operation
(refer to diagrams)• Transport supports• Slings gear for rotary drive
KonstantgetriebeSingle gear rotary drive
KDK 180 SL (Optional)
SchaltgetriebeMulti gear rotary drive
n [1/min]
n [1/min]
n [1/min] n [1/min]
n [1/min]
n [1/min]
n [1/min]
50
09 31
M [k
Nm
] 181
50
013 31
M [k
Nm
] 123
0119 11931
M [k
Nm
] 181140 137
61
09 26
M [k
Nm
] 178
61
012 26
M [k
Nm
] 128
026
M [k
Nm
] 178
280
19 56
M [k
Nm
] 81
1. Gang Standardbetrieb1st gear standard mode
1. Gang Einrichten und Felsbohren1st gear Set up and rock drilling
1. Gang MD reduziert1st gear MD reduced
2. Gang Standardbetrieb2nd gear standard mode
KDK 180 KL (Standard)
Drehmoment nominal,Darstellung nicht maßstäblich
Nominal torque values,not to scale
Berechnung mit 230 kW MotorCalculation with 230 kW engine
905-626-1_02-2017_BG18H.qxd 25.03.2017 14:21 Uhr Seite 5
BG 18 H (BT 50) © BAUER Maschinen GmbH, 2/2018
Geräteträger BT 50 Base carrier BT 50
Cummins QSB 6.7
Nennleistung ISO 3046-1 Rated output ISO 3046-1 201 kW @ 2.100 U/min (rpm)
Motor spezifiziert nach Abgasnorm Engine conforms to Exhaust Emission EEC 97/68EC Stage III AStandard und EPA/CARB TIER 3
Cummins QSB 6.7
Nennleistung ISO 3046-1 Rated output ISO 3046-1 201 kW @ 2.100 U/min (rpm)mit Leistungspaket with power package 230 kW @ 2.100 U/min (rpm)
Motor spezifiziert nach Abgasnorm Engine conforms to Exhaust Emission EEC 97/68EC Stage IVStandard und EPA/CARB TIER 4 final
Dieseltank Diesel tank 500 l
Schalldruckpegel in Kabine Sound pressure level in cabin(EN 791, Anh. A) (EN 791, Annex A) LPA 80 dB(A)
Schalleistungspegel Sound power level (2000/14/EG u. EN 791, Anh. A) (2000/14/EG u. EN 791, Annex A) LWA 114 dB(A)
Hydrauliksystem Hydraulic system Zweikreisbohrhydraulik2-hydraulic circuit system for drilling
Hydraulikdruck Hydraulic pressure 300 bar
Fördermengen (Hauptkreise + Hilfskreis) Flow rates (main circuits + auxiliary circuit) 2 x 210 l/min + 1 x 120 l/min
Tankinhalt Hydraulic oil tank capacity 500 l
Unterwagen (Teleskopfahrwerk) Undercarriage (Retractable crawler frames) UW 50
Laufwerksklasse Crawler type B 60
Spurweite (eingefahren/ausgefahren) Track width (retracted/extended) 2.300 / 3.500 mm
Fahrwerksbreite (eingefahren/ausgefahren) Overall width of crawlers (retracted/extended) 3.000 / 4.200 mm
3-Steg Bodenplatten Width of triple grouser track shoes 700 mm
Fahrwerkslänge Overall length of crawlers 4.750 mm
Zugkraft (effektiv / nominal) Traction force (effective / nominal) 380 / 437 kN
Fahrgeschwindigkeit Travel speed 1,5 km/h
905-626-1_02-2017_BG18H.qxd 25.03.2017 14:21 Uhr Seite 6
Engine, Tier 3Motor, Stage III
Motor, Stage IV Engine, Tier 4 final
A
17230
Hw
3230
1850
B
T
Anwendungen Applications
© BAUER Maschinen GmbH, 2/2018 BG 18 H (BT 50)
Kellybohrverfahren Kelly drilling system
Bemerkungen zur Bohrdatenermittlungsiehe „Kellystangen 905.518.1“
For further details on the acquisition ofdrilling data please refer to “Kelly Bars 905.518.1”
Unverrohrt Uncased 1.500 mm
Verrohrt Cased 1.200 mm
Ohne BV Without casing oscillator Hw - 0,5 m
Mit BV With casing oscillator Hw - 1,5 m
Zusatzausstattung / optional equipment:
Anbau VerrohrungsmaschineAttachment of hydraulic oscillator
BV 1180 HD-03 BV 1300 L-03
Standardverfahren: unverrohrt, oder Einbau der Verrohrung mit Drehgetriebe
Option: Einbau der Verrohrung mit angebauterhydraulischer Verrohrungsmaschine
Standard system: Uncased drilling or installation of casingwith rotary drive
Optional: Installation of casing with hydraulicoscillator attached to the drilling rig
Kellytyp A (m) B (m) Gewicht Hw (m) T (m)Type of kelly bar Weight (kg)
BK 200/368/3/18 8,4 20,4 3.300 6,7 19,0
BK 200/368/3/24 10,4 26,4 3.900 4,7 25,0
BK 200/368/3/30 12,4 32,4 4.500 2,7 31,0
BK 200/368/4/32 10,5 35,1 5.600 4,6 33,7
BK 200/368/4/40 12,5 43,1 6.600 2,6 41,7
BK 200/368/4/44 13,5 47,1 7.200 1,6 45,7
Bohrtiefen Drilling depths
Bohrdurchmesser Drilling diameter
Bohrrohrlängen Length of casing sections
905-626-1_02-2017_BG18H.qxd 25.03.2017 14:21 Uhr Seite 7
Anwendungen Applications
BG 18 H (BT 50) © BAUER Maschinen GmbH, 2/2018
SOB – Bohrverfahren CFA – drilling system
Hub
/ S
troke
123
80
15300
19390
2920
0
300 3310
1080
R 3200
900
Sch
neck
enlä
nge
/ Aug
er le
ngth
140
00
hydraulische Mastabstützung erforderlichHydraulic mast support required
Zeichnung: Kombinierte Zugkraft mit Vorschubwinde + Hauptwinde mit modifizierter Aufhängung und Traverse Drawing: Combined extraction force with crowd winch and main winch with modified connection and spreader beam
ohne Kellyverlängerung mit Kellyverlängerung 6 mwithout kelly extension with kelly extension 6 m
Bohrtiefe mit SchneckenputzerDrilling depth with auger cleaner 11,8 m 17,8 m
Bohrtiefe ohne SchneckenputzerDrilling depth without auger cleaner 13,0 m 19,0 m
Max. BohrdurchmesserMax. drilling diameter 750 mm 750 mm
Max. Zugkraft mit Haupt- und Vorschubwinde (effektiv)Max. extraction force with main- and crowd winch ( effective) 480 kN 480 kN
Hub
/ S
troke
123
80
15300
24300
2920
0
300 3310
1080
Sch
neck
enlä
nge
/ Aug
er le
ngth
140
00
6000
R 3200
900
905-626-1_02-2017_BG18H.qxd 25.03.2017 14:21 Uhr Seite 8
Anwendungen Applications
© BAUER Maschinen GmbH, 2/2018 BG 18 H (BT 50)
FDP – Bohrverfahren Full displacement pilingH
ub /
Stro
ke 1
2750
15300
26570
2550
0
300 3310
1080
Ges
täng
elän
ge /
Rod
leng
th 1
0900
8000
R 3200
900
3040
hydraulische Mastabstützung erforderlichHydraulic mast support required
Bohrtiefe ohne KellyverlängerungDrilling depth without kelly extension 12,2 m
Bohrtiefe mit KellyverlängerungDrilling depth with kelly extension 20,2 m
BohrdurchmesserDrilling diameter 360 – 510 mm
Max. Zugkraft mit Haupt- und Vorschubwinde (effektiv)Max. extraction force with main- and crowd winch (effective) 480 kN
Hub
/ S
troke
127
5015300
26570
2550
0
300 3310
1080
8000
R 3200
900
Ges
täng
elän
ge /
Rod
leng
th 1
0830
3000
hydraulische Mastabstützung erforderlichHydraulic mast support required
SCM – Bohrverfahren Single Column Mixing
Mischtiefe ohne KellyverlängerungMixing depth without kelly extension 12,2 m
Mischtiefe mit KellyverlängerungMixing depth with kelly extension 20,2 m
Max. MischdurchmesserMax. mixing diameter 1.500 mm
Max. Zugkraft mit Haupt- und Vorschubwinde (effektiv)Max. extraction force with main- and crowd winch (effective) 480 kN
905-626-1_02-2017_BG18H.qxd 25.03.2017 14:21 Uhr Seite 9
Anwendungen Applications
BG 18 H (BT 50) © BAUER Maschinen GmbH, 2/2018
VdW-Bohren FOW-drillingH
ub /
Stro
ke 1
2900
19130
2280
15180
0
330 3310
1080
Roh
r / P
ipe
1350
0
R 3200
1000
hydraulische Mastabstützung erforderlichHydraulic mast support required
Bohrtiefe ca.Drilling depth approx. 12,5 m
BohrdurchmesserDrilling diameter 406 – 610 mm
DrehgetriebeRotary Drive DKS 40/60
Leistungspaket 230 kW empfohlenPower package 230 kW recommended
1100
0
19440
0
450 2930
1080
R 3200
530
hydraulische Mastabstützung erforderlichHydraulic mast support required
Tiefenrütteln Depth vibrator
Einfahrtiefe ca.Penetration depth approx. 11,0 m
Vorschubkraft (Druck)Crowd force (push) 100 kN
RüttlerVibrator TR 17
905-626-1_02-2017_BG18H.qxd 25.03.2017 14:21 Uhr Seite 10
Transportdaten Transport data
© BAUER Maschinen GmbH, 2/2018 BG 18 H (BT 50)
30003000 300
300700700
1080
10002260
1580
440
1860
3400
47506510 6950
18210
Max. BK200/368/3/21
1080
440
1860
3400
3400
3400
47506510 6950
18210
1080
440
1860
3400
47506220 6950
17920
G = 44,1 t
G = 48,1 t
G = 52,0 t
G = 4,0 t (KDK 180 KL) 4,2 t (KDK 180 SL)
Gewichtsangaben sind ca. Werte,Zusatzausrüstungen (Optionen)können das Gesamtgewicht undAbmessungen verändern.
Weights shown are approximatevalues, optional equipment maychange the overall weight anddimensions.
905-626-1_02-2017_BG18H.qxd 25.03.2017 14:21 Uhr Seite 11
Konstruktionsentwicklungen und Prozessverbesserungen könnenAktualisierungen und Änderungen von Spezifikation und Materialienohne vorherige Ankündigung oder Haftung erforderlich machen. Die Abbildungen enthalten möglicherweise optionale Ausstattungund zeigen nicht alle möglichen Konfigurationen. Diese Angaben und die technischen Daten haben ausschließlichInformationscharakter. Irrtum und Druckfehler vorbehalten.
Design developments and process improvements may require thespecification and materials to be updated and changed withoutprior notice or liability. Illustrations may include optional equipmentand not show all possible configurations. These and the technical data are provided as indicative informationonly, with any errors and misprints reserved.
905.805.1+2 2/2018
„Low headroom“-System
bma.bauer.de
BAUER Maschinen GmbHBAUER-Strasse 186529 SchrobenhausenGermanyTel. +49 82 52 [email protected]
Hub
/ S
troke
660
0
BK
200
/368
/4/1
69250
11140
1870
8470
0
3310 - 58304750
1080
R 3320900
12500
Der einteilige Standardmast kann wahlweisedurch einen zweiteiligen Mast ersetzt werden, mitwelchem das Gerät als Standardbohrgeräteinsetzbar ist. Für Anwendungen bei begrenzterArbeitshöhe kann das obere Mastsegmentabgebaut und der Standard Mastkopf verwendetwerden. Dadurch entsteht ein Bohrgerät mit einerminimalen Gesamthöhe von ca. 11,1 m.
The standard one-sectional mast can optionallybe replaced by a segmental mast. For use withlimited working height the upper mast segmentcan be removed and the standard mastheadused. The drilling rig reaches a minimum overallheight of 11.1 m.
Alternativ kann ein spezieller Low Head Mastkopfaufgebaut werden. Dies ermöglicht das Erreicheneiner minimalen Gerätehöhe von ca. 10,7 m.
A special low head masthead can alternatively beinstalled. This enables a minimum overall heightof 10.7 m.
Standardmastkopf Standard mast head
Hub
/ S
troke
660
0
BK
200
/368
/4/1
6
9250
10660
1870
8470
0
3310 - 58304750
1080
R 3320900
12020Sondermastkopf Special mast head
905-626-1_02-2017_BG18H.qxd 25.03.2017 14:21 Uhr Seite 12