Client Project
Wall condition
Project data
Building dimensions
Insulation
Wind loads
Facade panel*
Fixing method*
Company* _____________________________________Address* _____________________________________Client number* _____________________________________Contact person* _____________________________________Phone _____________________________________E-mail _____________________________________Fax _____________________________________
Project name* _____________________________________Address* _____________________________________
Editor name _____________________________________Date of request _____________________________________
Offer deadline* _____________________________________Estimated project start _____________________________________
S2S Slab thickness [mm]* ____________________ Distance between slabs [m]* ____________________Other information _____________________________________
Wind membrane* Thermal conductivity insulation λ [W/mK]** ___________________Target U-value** ___________________
According to customer specification Normal area [B] uplift [kN/m2] ____________________Normal area [B] pressure [kN/m2] ____________________Edge area [A] uplift [kN/m2] ____________________Edge area [A] pressure [kN/m2] ____________________
Producer ________________________________________Dimension [mm] ______ × ______Thickness [mm]* _______________ Weight [kg/m2] _________Orientation Landscape Portrait
Submit form
Concrete Quality [N/mm²] _____ Cracked concrete Quality [N/mm²] _____ Aerated concrete AAC 6 4 2 Steel Type _____________ Thickn. [mm] _____ SFS Type _____________ Thickn. [mm] _____ Timber Type __________ CP-board Thickn. [mm] _____ Solid brick Lime-sand. solid Perf. brick Lime-sand. w. hole Others ___________________________________________________
Type New building RenovationProject status Tendering stage Contract signedFacade area [m2]* ____________________
Building height [m]* ____________________Building width [m] ____________________Building length [m] ____________________
Insulation thickness [mm]* ____________________Producer / type ____________________Insulation fastener ____________________
Terrain category* Rural area Inner city area Outside inner city area Basic wind velocity [m/s] ____________________Altitude [m] ____________________Dist. upwind to shoreline [m] ____________________
Ceramic Metal Fibrecement Terracotta HPL Plaster Timber Other ______________________________
Wall thickness [mm]* ____________________Pull-out value [kN] _________________ FRK
Wall-to-panel distance [mm]* ____________________Non-load-bearing layer thickness [mm]* ____________________Structural fire protection requirements ____________________
With protocol Fixing with X-CR 52 P8 S15
Wall thermal conductivity λ [W/mK]** ____________________
Contact: +43 2627 424 00 34, www.hilti.co.uk* The cells which are marked with a * have to be filled out. ** Only if U-value calculation is needed.
Visible Invisible With rivets / screws With adhesives With stud anchors With undercut anchors With clamps With clamps
Substructure orientation Vertical Horizontal 2-layer
PROJECT DATA SHEET FOR LIGHT VENTILATED FACADE