VTS-05A SER VO TECHNICA L D AT A Control System: Operating V oltage: STD Direction: T est V oltage: Operating Speed: Stall T orque:
Output Angle:
Running Current: Stall Current:
Dead Band Width:
FE A TURES Motor T ype: Potentiometer Life: Bearing: Gear Material:
DIMENSIONS Size : W eight:
CASE AND HORN DR A WING
Spline Horns: Connector Wire Length:
V ersion: SPL_VTS-05A_V1.1_20091022
STD ACCESSORIES:
OPTION ACCESSORIES:
REMARKS:
NO ECNEREFER
LY
FOR REFERENCE
Cross Horn "C" Single side Horn "C" Circular Horn "C"
Cross Horn "C" × 1pc
Single side Horn "C" × 1pc
Circular Horn "C" × 1pc
Horn Screw × 1pc
8.0g(0.28 oz) 22.5×12.8×23.3mm(0 . 88×0.5×0.92in)
Pulse width control, 1500 μs neutral 4.8V ~ 6.0V (DC) Counter clockwise/pulse traveling 800 to 2200 μsec. at 4.8V at 6.0V 0.19sec/60°at no load 0.17sec/60° at no load≥ 1.0kgf.cm(13.89 oz/in) ≥ 1.2kgf.cm(1 6.66 oz/in)
≥ 170°
~ 0.2A ~ 0.6A
5μsec
Coreless Motor 1,000,000 cycles None Resin
~ 0.3A ~ 0.7A
Spline type for HITEC style 250mm(9.84in),28 A WG(Connector for FU T AB A or JR style)
3 2 . 5
9 . 0
1 2 . 8
2 8 . 5
2 3 . 7 6 . 0
2 2 . 5
2 3 . 3 2- 2 . 0