LICENCE OF CERTIFICATION
Date: No./Version:
First version granted:
Licensee’s name and address Marks covered by licence:
Information regarding licensee/manufacturer
Licensee’s technical officer
Telephone
Telefax
Manufacturer
Place of manufacture
Product covered by the licence
Type of product
Standard/Other normative document
Specific rules
Specification of product
The licensee above is hereby given permission to use the INSTA-CERT mark on or in connection with products, which fulfil the requirements of the standard or the normative document specified above (what is said in this document about INSTA-CERT mark will also be valid for marks defined in relevant SBC). The certification licence is valid on the condition that the licensee complies with the ”General rules for certification by partners of INSTA-CERT” (GRC) and the specific rules applying to certification of products of the type mentioned. The licensee is obliged to indemnify INSTA-CERT of any claim for damages or any other expenses to which partners of INSTA-CERT may become liable as a result of injuries caused by a product manufactured or sold by the licensee. This also applies to defective or faulty products.
The licence is valid for one calendar year and is automatically renewed for one year at a time, unless the licensee or member of INSTA-CERT gives at least three months’ notice to the contrary. The licence will be re-issued with an amended date and version number only if the content and/or conditions of the licence have been changed. The licence is not transmittable.
MEMBER OF INSTA-CERT: INSPECTA SERTIFIOINTI OY Anne Qvintus, Managing Director
2013-07-01 4010-03
Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA
PP-plaströr enligt bilaga 1. Råmaterial och tätningsringar enligt bilaga 2 (konfidentiell). Inspektion av produktionsplats: VTT/RTE4827/05
Jaana Hallikas + 358 20 129 211 + 358 20 129 210
Plastic pipes
Nastola, Finland
SBC 1451
EN 1451-1
2005-06-20
Annex 1 Sivu 1 (1) Licence of certification No. 4010-03 Date 2013-07-01
Licensee Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA
Rördelar: Produktnamn Rördelsgrupp Användningsområde/Rörserie Dimensioner - storleksgrupp 1 Användningsområde/Rörserie Dimensioner - storleksgrupp 2 Rördelsgrupp Användningsområde/Rörserie Dimensioner eksgrupp 1 Användningsområde/Rörserie Dimensioner - storleksgrupp 2 Rördelsgrupp Användningsområde/Rörserie Dimensioner - storleksgrupp 1 Användningsområde/Rörserie Dimensioner - storleksgrupp 2 Tillverkarens beteckning på produkter Rör: Användningsområde Rörserie Dimensioner, mm - storleksgrupp 1
UPONOR HTP Böjar B/S16 32 – 50 BD/S16 75 – 160 Grenar B/S16 32 – 50 BD/S16 75 – 160 Andra rördelar B/S16 32 – 50 BD/S16 75 – 160 1 B S16 32 - 50
Testrapporter och andra referensdokument: Typgodkännande YM74/6221/2004 Nemko certifikat 1021 VTT-S-07146-06