Me‐type Implant
BBC Implant
Platform changing
Neck-lock
Bottom round
Internal 8゚ Morse taper
Internal HEX connection
Me‐type Implant
First threaded round
Φ 4.0mm series Φ 4.3mm series Φ 5.0mm series
Me4008SMe4010SMe4012S
Me4308SMe4310SMe4312S
Me5008SMe5010SMe5012S
Φ 4.0mm
Φ2.5
Endosteal depth
Φ 4.3mm
Φ2.8
Φ 5.0mm
Φ3.5
*The diameter of the implant-abutment connecting part is φ 3.5mm.
Me‐type Implant
Drilling Sequences
Guide Drill 20Spiral Drill 25Spiral Drill 28Spiral Drill 32Spiral Drill 35Spiral Drill 38Spiral Drill 41Spiral Drill 45
Guide Drill 20Spiral Drill 25Spiral Drill 28Spiral Drill 32Spiral Drill 35Spiral Drill 38
Guide Drill 20Spiral Drill 25Spiral Drill 28Spiral Drill 32Spiral Drill 35Me50**S
Guide Drill 20Spiral Drill 25Spiral Drill 28Spiral Drill 32Spiral Drill 35Spiral Drill 38
Guide Drill 20Spiral Drill 25Spiral Drill 28Spiral Drill 32Spiral Drill 35
Guide Drill 20Spiral Drill 25Spiral Drill 28Me43**S
Guide Drill 20Spiral Drill 25Spiral Drill 28Spiral Drill 32Spiral Drill 35
Guide Drill 20Spiral Drill 25Spiral Drill 28Spiral Drill 32
Guide Drill 20Spiral Drill 25
Me40**S
Hard Bone(Type I)
Normal Bone(TypeIII-II)
Soft Bone(TypeIV)
Me-typeImplant
* Do drilling 1.0mm deeper than the full length of an Implant.
Drilling Sequences
* Do drilling 1.0mm deeper than the full length of an Implant.
In case of Me4010S
Soft Bone(Type IV)
Normal Bone(Type III-II)
Hard Bone(Type I)
Drilling Rotation 1000rpm 800rpm 800rpm 600rpm
▲ This step can skip over in case of Hard Bone.
Drilling SequencesIn case of Me4310S
Soft Bone(Type IV)
Normal Bone(Type III-II)
Hard Bone(Type I)
* Do drilling 1.0mm deeper than the full length of an Implant.
Drilling Rotation 1000rpm 800rpm 800rpm 600rpm
▲ This step can skip over in case of Hard Bone.
Drilling SequencesIn case of Me5010S
Soft Bone(Type IV)
Normal Bone(Type III-II)
Hard Bone(Type I)
* Do drilling 1.0mm deeper than the full length of an Implant.
Drilling Rotation 1000rpm 800rpm 800rpm 600rpm
▲ This step can skip over in case of Hard Bone.