Tool Measurement
NT Technology
Tool Breakage Detection
Tool Length Measurement
Tool Radius Measurement
Single Cutting Edge Monitoring
Axes Compensation
LaserControl Micro Single NT
LaserControl Micro Single NT
61 30
23
22,5
98
Technical data
Laser safety classification Class 2 acc. to IEC60825‑1, 21 CFR 1040.10
Laser type Visible red light laser | 630 ... 700 nm | <1 mW
Protection class IP68
Power supply 24 V DC/160 mA
Inputs/Outputs 24 V DC | 0 ... 5 V DC analogue output *
Repeatability Δ transmitter/receiver: <750 mm: 2.9 μm 2σ **
Δ transmitter/receiver: <1500 mm: 5.6 μm 2σ **
Minimum tool diameter ** Δ transmitter/receiver: <750 mm: 210 μm | 137 μm***
Δ transmitter/receiver: <1500 mm: 405 μm | 268 μm***
Test speed (spindle) up to 200.000 rpm
*Option **Depending on installation situation, stability of fixation, distance and measuring mode*** With reduced amplification
Blum worldwideService & Support More than 40 subsidiariesand service offices.
www.blum-novotest.com
Blum-Novotest GmbH | Kaufstrasse 14 | 88287 Gruenkraut | Germany | +49 751 6008-0 | [email protected] Production Metrology Made in Germany
© B
lum
‑Nov
otes
t Gm
bH |
Ver
sion
08|
18,
Subj
ect t
o te
chni
cal c
hang
e w
ithou
t any
not
ice
LaserControl Micro Single NT | Non-contact tool setting system for machine tools
Extremely precise single system for tool setting
and monitoring under harshest conditions
• High absolute accuracy due to focused laser beam
• Measurement at nominal spindle speed
• 100 % process reliability due to patented NT‑Electronics
• BLUM pneumatic unit and shutter system provide superior protection
• Programmable by integrated microprocessor
Your benefit:
• Easy beam alignment due to LED band
• Increased productivity and production quality
• No subsequent damages due to tool breakage
• Reduced set‑up time and unmanned operation
• Reduced scrap rate
Fast single cutting edge monitoring
Complete system with accessories for easy mounting in the machining area
100 % reliable due to BLUM protection system
Indispensable – the BLUM pneumatic unit
Blum-Novotest Ltd.Unit 15 Granary Wharf Business ParkWetmore Road, Burton upon TrentStaffordshire , DE14 1DUUnited KingdomPhone: +44 1283 569691Fax: +44 1283 [email protected]
Blum-Novotest, Inc.4144 Olympic BoulevardErlanger, KY 41018USA
Phone: +1 (859) 344 6789Fax: +1 (859) 344 [email protected]