Download ppt - SENSORS AND TRANSDUCERS Accelerometers Pressure sensors Differential pressure switches Sound pressure sensors Rotation sensors Rotation velocity

SENSORS AND TRANSDUCERSSENSORS AND TRANSDUCERS

AccelerometersAccelerometers

Pressure sensorsPressure sensors

Differential pressure switchesDifferential pressure switches

Sound pressure sensorsSound pressure sensors

Rotation sensorsRotation sensors

Rotation velocity sensorsRotation velocity sensors

Displacement sensorsDisplacement sensors

Temperature sensorsTemperature sensors

Heat flow sensorsHeat flow sensors

TransducersTransducers

LLC “SENSOR ENTERPRISE “ZAVOD RAPID”

Chernigov, Ukraine

Temperature measuring sensors

SENSORS AND TRANSDUCERS

ТМ 006

It is assigned for measuring of temperature of a flat surface

Copper resistance thermometer with cable-end splitting in a plastic case

Calibrating characteristics in the working temperature range

SPECIFICATION

from -196оС till +200оС

VALUE

Characteristic accuracy ± 0,5оС

Service life at the temperature range from –196оС till +100оС 33 000 hours

Storage warranty period 20 years

Thermal inertia index less than 0,01 sec

Thermometer resistance at 0оС 17, 23, 30, 53, 60, 100 Ohms

Mass less than 8 g

Space industry

ТМ 006А


SPECIFICATION


VALUE




Thermal inertia index less than 0,01 s


Mass less than 2,5 g


Copper resistance thermometer in a plastic case

It is assigned for measuring of temperature of a flat surface


Space industry

ТМ 104

It is assigned for measuring of temperature of surfaces with curvature radius 7..100 mm

Copper resistance thermometer with cable-end splitting in a plastic case


SPECIFICATION


VALUE






Mass not more than 8 g



Space industry

ТМ 104А

Copper resistance thermometer in a plastic case


VALUE

± 0,5оС

33 000 hours

15 years

less than 0,01 s

17, 23, 30, 53, 60, 100 Ohms

not more than 4,5 g

It is assigned for measuring of temperature of surfaces with the curvature radius 7..100 mm




SPECIFICATION

Characteristic accuracy

Service life at the temperature range from –196оС till +100оС

Storage warranty period

Thermal inertia index

Thermometer resistance at 0оС

Mass

Space industry

ТЭМ 000

Sensing element

It is assigned for measuring of temperature of surfaces


SPECIFICATION


VALUE


Service life at the temperature range : from -196оС till +100оС from -10оС till +100оС

33 000 hours

20 years


17, 23, 30, 53, 60, 100 Ohms

0,5 g

55 000 hours



Storage warranty period

Thermometer resistance at 0оС

Mass

Space industry

ТЭМ 006

Sensing element



SPECIFICATION


VALUE


Service life at the temperature range: from -196оС till +100оС


33 000 hours




Mass 0,5 g

55 000 hours



Space industry

ТЭП 012

Platinum resistance thermometer without current terminal splitting (sensing element).



SPECIFICATION


VALUE


Guarantied lifetime during warranty period, when it operates within temperature range from -260оС till +100оС

33 000 hours


Thermometer resistance at 0С 15,25,34,46,60,100 Ohms

Mass nor more than 0,5 g



Space industry

ТЭП 018




SPECIFICATION


VALUE



33 000 hours


Thermometer resistance at 0С 15,25,34,46,60,100,500 Ohms

Mass not more than 0,5 g



Space industry

ТЭП 018А


It is assigned for measuring of temperature of surfaces with the curvature radius 7…100 mm


SPECIFICATION


VALUE



33 000 hours


Thermometer resistance at 0 С 15,25,34,46,60,100,500 Ohms




Space industry

ТП 018

Platinum resistance thermometer



SPECIFICATION

от -260оС до +300оС

VALUE



33 000 hours






Space industry

ТП 018А




SPECIFICATION


VALUE



33 000 hours






Space industry

ТП 110


It is assigned for measuring of temperature of surfaces with the curvature radius 7…100 mm


SPECIFICATION


VALUE



33 000 hours


Thermometer resistance at 0 С 15,25,34,46,60,100 Ohms




Space industry

ТП 110А




SPECIFICATION


VALUE



33 000 hours


Thermometer resistance at 0 С 15,25,34,46,60,100 Ohms




Space industry

ТП 025




SPECIFICATION


VALUE



33 000 hours


Thermometer resistance at 0 С 34 Ohms




Space industry

ТМ 166

It is assigned for measuring of temperature of the undisturbed non-aggressive nonconductive liquids and gases

Temperature measuring range, at pressure value 200 kg/m2

SPECIFICATION

from 77,15 till 473,15 К

VALUE

Thermal inertia index at the air velocity value 5 ± 0,5 м/с not more than 5±1 s


Thermometer resistance at 0 С 23, 30, 53, 60, 100 Ohms

Mass not more than 0,08 kg



Space industry

ТМ 168

It is assigned for measuring of temperature of the undisturbed non-aggressive nonconductive liquids and gases

It is non-hermetic

Temperature measuring range

SPECIFICATION

от 77,15 до 473,15 К

VALUE

Thermal inertia index at the air velocity value 5 ± 0,5 m/s not more than 5±1 s


Thermometer resistance at 0 С 23, 30, 53, 60, 100 Ohms


Total operating time, when it operates within temperature range from 123,15 till 373,15 К.

13 000 hours



Space industry

ТМ 168А

It is assigned for measuring of temperature of non-aggressive gases within compartment volumes.

The sensor is non-hermetic

The sensor’s end connection is 2РМ Г14Б4 Ш1Е2Б (male)


SPECIFICATION

from 77,15 till 473,15 К

VALUE

Thermal inertia index at the air rate 5 ± 0,5 м/с not more than 5±1 s


Thermometer resistance at 0 С 273,15 Ohms; 92 Ohms


Total operating time, when it operates within temperature range from 123,15 till 373,15 К

120 000 hours



Space industry

ТМ 119

It is assigned for measuring of temperature of aggressive liquids and gases.

There are 14 modifications of the thermometer, differing by the lengths of its submersible part - from 30 mm till 56 mm, and electrical resistance value – from 23 till 100 Ohms

Temperature measuring range, at maximal pressure 600 kg/sm2

SPECIFICATION

от -196 до +200о С

VALUE

Thermal inertia index in the boiling water not more than 4 s


Thermometer resistance at 0 С from 23 till 100 Ohms




Space industry

ТМ 221

Copper resistance thermometer

It is assigned for measuring of temperature of surfaces (including the surfaces that undergo the direct sun radiation)


SPECIFICATION

от -50 до +200 оС

VALUE

Calibration characteristic accuracy ± 0,5 ˚С


Thermometer resistance at 0 С 50, 100, 200 Ohms




Space industry

ТМ 222

It is assigned for measuring of temperature of a neutral gaseous mixtures


SPECIFICATION

от 0 до +50о С

VALUE

Calibration characteristic accuracy ± 0,5 ˚С


Thermometer resistance at 0 С 100, 200 Ohms




Space industry

ТМ 232

Resistance thermometer with cable-end splitting in a plastic case

It is assigned for measuring of temperature of: flat surfaces; pipeline surfaces, diameter 14 mm and more; spherical surfaces, diameter 20 mm and more


SPECIFICATION

от -130 до +200о С

VALUE

Calibration characteristic accuracy not more than 1,5˚С


Thermometer resistance at 0 С 53,0±0,3 and 100±0,9 Ohms


Ресурс в диапазоне температур от -130 до +170о С 33 000 hours



Space industry

ТП 033

The thermometer is assigned for measuring of temperature of a flat surfaces


SPECIFICATION

from -50 till +1000о С

VALUE


Thermometer resistance at 0 С 12, 15, 25, 34 Ohms



Space industry

ТП 041

The thermometer is assigned for measuring of temperature of surfaces with curvature radius 7..100 mm


SPECIFICATION


VALUE



Thermometer resistance at 0 С 12,15,25,34 Ohms




Space industry

ТП 251

The thermometer is assigned for measuring of temperature of surfaces


SPECIFICATION


VALUE

Total calibration characteristic accuracy ± 0,5˚ С

Thermometer resistance at 0 С 46, 100, 500 Ohms

First cycle duration not less than 15 min.

Assigned resource: within temperature range from -130 till +160 оС

within temperature range from -260 till +300 оС

100 cycles

15 cycles



Space industry

ТП 198

The thermometer is assigned for measuring of temperature of cryogenic liquids


SPECIFICATION

from 13 К till 473 К

VALUE

Thermal inertia index not more than 3 s


Thermometer resistance at 0 С 100, 500 Ohms


Total calibration characteristic accuracy: - within temperature range from 13 К till 273 К - within temperature range from 273 К till 473 К

± 0,1˚ С ± 0,5˚ С



Space industry

ТП 227



SPECIFICATION

от 13 К до 473 К

VALUE



Thermometer resistance at 0С 25,46,100, and 500 Ohms


Total calibration characteristic accuracy: - within temperature range from 13 К till 273 К

- within temperature range from 273 К till 473 К ± 0,1 ˚С ± 0,5 ˚С



Space industry

ТП 203


It has ten modifications


SPECIFICATION

from 13 К till 473 К

VALUE



Thermometer resistance at 0оС 100 and 500 Ohms


Total calibration characteristic accuracy: - within temperature range from 13 К till 273 К

- within temperature range from 273 К till 473 К± 0,1˚ С ± 0,5˚ С



Space industry

ТП 165

It is assigned for measuring of temperature of a non-aggressive smooth nonconductive gases and liquids.It has five modifications, differing by electrical resistance value at 0 ˚С. It is hermetical up to pressure value of 200 kgf/sm2


SPECIFICATION

from -260 till +300˚ С

VALUE

Thermal inertia index at air velocity value 5±0,5 m/s less than 3 s






Space industry

ТП 175


SPECIFICATION VALUE

not more than 3 s




Thermal inertia index at air velocity value 5±0,5 m/s

from -260 till +300˚С

It is assigned for measuring of temperature of a non-aggressive smooth nonconductive gases and liquids.It has five modifications, differing by electrical resistance value at 0 ˚С. It is no hermetical



Space industry

ТП 073It is assigned for measuring of temperature of a non-aggressive and neutral gases and liquids.It has 15 modifications, differing by electrical resistance value at 0 ˚С and the length of submersible part - from 30 to 56 mm. It is hermetical up to pressure value of 300 kgf/sm2


SPECIFICATION VALUE

Thermal inertia index in boiling water not more than 0,3 s


Thermometer resistance at 0 С from 25 till100 Ohms





Space industry

ТП 085


SPECIFICATION VALUE

Thermal inertia index in boiling water not more than 4 s




from -260 till +300 ˚С

It is assigned for measuring of temperature of an aggressive gases and liquids under the maximal pressure 600 kgf/cm2.It has 15 modifications, differing by electrical resistance value at 0 ˚С and the length of submersible part - from 30 till 56 mm.



Space industry

ТП 062


SPECIFICATION VALUE

Thermal inertia index in boiling water not more than 4 s


Thermometer resistance at 0оС from 25 till100 Ohms



It is assigned for measuring of temperature of both aggressive and non-aggressive gases and liquids under the maximal pressure 300 kgf/cm2.It has 15 modifications, differing by electrical resistance value at 0 ˚С and the length of submersible part - from 30 to 56 mm



Space industry

ТГЭ 007

Setting point temperatures

SPECIFICATION VALUE

Calibration from the setting point within the range ± 10˚С




14 and 20˚С

It is assigned for measuring of temperature of non-aggressive liquids

SENSORS AND TRANSDUCERS Space industry

ИС 470А


SPECIFICATION VALUE

Nominal static characteristic of the sensor meets GOST 3044

Warranty period (after putting into operation) 12 years


from 0 till +2500˚С

Thermal inertia index not more than 0,25 s

It is assigned for one-time measuring of the non-aggressive gaseous medium temperature

Maximal working pressure 40 MPa



Space industry

ТТ 135


SPECIFICATION VALUE

Rated static characteristic Meets GOST3044

Storage warranty period (after putting into operation) 15 years




It as assigned for measuring of temperature of non-aggressive liquids and gases




Space industry

ТТ 142


SPECIFICATION VALUE

Rated static characteristic of the sensor meets GOST 3044





It as assigned for measuring of temperature of aggressive and oxidizing liquids and gases




Space industry

ТТ 243


SPECIFICATION VALUE

Nominal static characteristic of the sensor meets GOST 3044

Warranty period (after putting into operation) 15 years



Measuring accuracy not more than 1%

It is designed for measuring of temperature of the flat surfaces and of surfaces with the curvature radius from 5 mm and more of constructive elements, that are made of various steel and aluminum alloys, titanium and non-metals

Electrical resistance of the thermometer’s circuit from 14,5 Ohms till 65 Ohms



Space industry

ТТ 257


SPECIFICATION VALUE

Rated static characteristic of the sensor Meets GOST 3044




Measuring accuracy not more than 1%

Thermometer is as assigned for measuring of temperature of gases

It has two sensing elements

Electrical resistance of the thermometer’s circuit from 14,5 till 65 Ohms



Space industry

ТТ 249


SPECIFICATION VALUE

Rated static characteristic of the sensor meets

GOST 3044





It is assigned for measuring of temperature of gaseous medium.

Measuring temperature range is 200…850˚С


ТТ 253

It is assigned for measuring of temperature of gaseous flows.



Space industry

ИТ 2000


SPECIFICATION VALUE

Working pressure 10 Pa


Mass: - ИТ 2000 - ИТ 2000-01 - ИТ 2000-02

not more than 0,09 кгnot more than 0,11 кгnot more than 0,13 кг

from -215 till +50˚С Individual transformation function of each Ит2000 is DC voltage drop dependent on temperature under working current 100 microamperes, it corresponds to individual transformation function of the thermo-diode sensing device ПТД-100 which is part of the sensor.

This function is represented both as table and as specific polynomial at the passport of each sensor.

Sensor accuracy: - in the range from minus 215 ºС till minus 175 ºС - in the range from minus 175 ºС дtill minus 30 ºС - in the range from minus 30 ºС till +30 ºС - in the range from +30 ºС till +50 ºС

less than ± 0,05 ºС less than ± 0,5 ºСless than ± 0,05 ºСless than ± 0,5 ºС

It is assigned for measuring of temperature of liquid supercooled oxygen in the filling-drainnig lines, non-aggressive and aggressive liquids, as well as product ‘Vinil” at various tanks and lines of carrier rocets.




Space industry

ВТ 125



Temperature sensor ВТ-125 is assigned for measuring of temperature of aviation fuel, oil, and air-oil emulsion.

Sensor produces electric signals, that are proportional to the measured temperature of aviation fuel, oil, and air-oil emulsion, for control-and-monitoring system of an aviation engine.

Sensor contains two sensing elements (two channels) with the nominal resistances of 50 Ohms at 0C.

Effective measured temperature range –60 … +300 CRated static characteristic of the sensor is Pt 50 (GOST 6651, IEC 751)

Measurement accuracy of the sensor in all operating conditions is less than

δ = ± (0,3 + 5 ·10-3 | t| ),

where δ is sensor accuracy, in °С, t is measured temperature, in °С.

Index of thermal inertia (time constant) 2.5 s

Output connector plug СНЦ30-10/14В-1В

Weight 50 g.

Warranty storage period two years

Warranty operation life 13 years after putting into operation

Aircraft industry

ВТ 125М1



Temperature sensor ВТ-1251 is assigned for measuring of temperature of aviation fuel, oil, and air-oil emulsion.

Sensor produces electric signals, that are proportional to the measured temperature of aviation fuel, oil, and air-oil emulsion, for control-and-monitoring system of an aviation engine.

Sensor contains two sensing elements (two channels) with the nominal resistances of 50 Ohms at 0C.

Effective measured temperature range –60 … +300 CRated static characteristic of the sensor is Pt 50 (GOST 6651, IEC 751)

Measurement accuracy of the sensor in all operating conditions is less than

δ = ± (0,3 + 5 ·10-3 | t| ),

where δ is sensor accuracy, in °С, t is measured temperature, in °С.

Index of thermal inertia (time constant) 2.5 s

Output connector plug 8533-1Y 12-12PN

Weight 50 g

Warranty storage period two years

Warranty operation life 13 years after putting into operation

Aircraft industry


Temperature measuring sensors application,Aircraft Industry

Sensor Is used in the engines

ВТ-125

ВТ-125М1

АИ-450С, АИ-450С-2,АИ-222-25, МС-500В,ТВ3-117-СБМ1, series 1

АИ-450С, АИ-450С-2, Д-136-2, Д-18Т series 3М,

Aircraft industry

4000.03.0820

It is assigned for measuring of outflowing gas jets in the process of benchmark trials of engines

Features:-Operability under impact of destabilizing factors-- high reliability--it not requires additional maintenance during operation


SPECIFICATION VALUE

Measuring accuracy within the range from +100 till +900˚ С ± 8,6 ºС

Electrical resistance under normal conditions 8±1 Ohms



Rated static characteristic of the sensormeets the calibration chart ‘L‘

of GOST 3044

The sensor consists of a thermocouple of type of ХК(L) which is mounted in the case and connected to cable ends. The working hot junction is placed in the case tip, and cable outlets are free ends.

The operating principle of the sensor is based on a thermal e. m. f. generation due to temperature difference between the working hot junction and free ends.



КТ-МС-400

It is assigned for transformation of the temperature of outgoing gases into thermal e.m.f., which is returned to the measuring and regulating unit as a DC voltage, that is proportional to mean temperature of gases from engine.


SPECIFICATION VALUE

Measuring accuracy within the range from +100 till +900˚ С ± 8,6 ºС

Electrical resistance under normal conditions 10±0,2 Ohms



Rated static characteristic of the sensormeets the calibration chart ‘К’

of GOST 3044

Time constant at the gas flow velocity more than 100 m/s 2 s

Features:-Operability under impact of destabilizing factors-- high reliability--it not requires additional maintenance during operation

The sensor contains of thermal outlets of the thermocouple cable of type of КТМС. These outlets are connected to the cable ends. Thermal outlets form a hot junction, and cable ands form a free ends.

Thermal outlets meet ОСТ 92-4313



П120-МС-400

It is assigned for measuring of temperature of deceleration of air flow. The sensor generate a signal to a regulator.


SPECIFICATION VALUE

Sensor static accuracy: - in the range from +30 till +110˚С - in the range from +110 till +170˚С

± 2 ºС± 3 ºС

Electrical resistance at 00С 46±0,25 Ohms



Rated static characteristicmeets the calibration chart ‘К’

of GOST 3044

Time constant at the gas flow velocity more than 45 m/s 6 s

The sensor contains of a sensing element (of two independent resistors) mounted within the case.

Calibration method – according to the category II of ОСТ92-0694. The sensor generates two independent signals. Calibration table – as the sensor resistance dependence of temperature at points -100, -50, 0, 20, 50, 100, 150, 200 С – is supplied to the passport.

The sensor operating principle is based on a property of platinum wire to change its resistance with the temperature change.



ФЛА 005

Heat flow sensors

Radiant heat flux density measuring range

SPECIFICATION VALUE

Rated static characteristic meets GOST 3044-94



from 0 till 630 kW/m2

Sensitivity: - ФЛА 005 - ФЛА 005-01 - ФЛА 005-02

54-89 V х m2/kW28-49 V х m2/kW13-36 V х m2/kW

It is assigned for one-time measuring of a radiant heat flux density


ФЛА 013

Radiant heat flux density measuring range

SPECIFICATION VALUE



from 0 till 2500 kW/m2

It is assigned for one-time measuring of a total heat flux density


Heat flow sensors

Space industry

(ДТО) 4К270-7382-0

Measuring temperature range

SPECIFICATION VALUE

Mass not more than 1 kg

from -189 till -181°С

The sensor is assigned for measuring of the mean temperature of an oxide within a pipeline.

The sensor is a part of a pipeline with the resistance thermometer , that is built in it. The sensing elements of the sensor receive the liquid temperature and change their resistances in a way, that stated in GOST 6651-84.

Rated temperature -187°С

Working liquid density at the rated temperature 1,155 kg/liter


Internal pressure not more than 14,2 MPa

The sensor contains three independent sensing elements; the resistance value of each sensing element is 200 Ohms at 0°С.



Heat flow sensors

Space industry

Thermocouple collector ВТ-4(-1)


Thermocouple collectors

Thermocouple collector BT-4(-1) is designed for transformation of the aircraft engine outgoing gas temperature into the thermal electromotive force and producing two autonomous DC voltages, that are proportional to the averaged gas temperature, and sending them to automatic control system.

The collector consists of four inseparable doubled thermocouples that form two independent measuring circuits which are ended in a mutual carrier socket.

SPECIFICATION VALUE

Averaged measured temperature range –60 … +1150COperating measured temperature range +200 … +800 CNominal static characteristic Chromel-alumel XA(K)

(GOST 3044, IEC)Allowable variation of thermocouple material class 2 (GOST 3044)Index of thermal inertia (time constant) 2.5 s(gas flow velocity 215 m/s, static pressure 10.68104 Pa)Quantity of independent electric signals 2in every thermocouple

Aircraft industry


Thermocouple collector application,Aircraft Industry


ВТ-4(-1) АИ-450М, АИ-450М1,АИ-450С, АИ-450-С2

Thermocouple collector ВТ-4(-1)

Aircraft industry


Thermocouple ВТ-36

Thermocouples

Aircraft industry

It is assigned for measuring of gas temperature at turbine of air gas-turbine engines

Number or output signals twoTemperature calibration type XAWorking medium GTE combustion materialsEffective measuring range from 450 till 1000 CMaximal working temperature 1110 C (up to 5% of service life)Rated static characteristic XA(K) GOST 3044Maximum permission error class 2 (GOST 3044)Mass 0.14 kgInsulation resistance:

Normal conditions not less than 0.5 MOhms700 C at working end not less than 0.05 Mohms

Insulating strength 350 V (under normal conditions)


Thermocouple ВТ-36

Thermocouples

BT-36 outline drawing

Thermocouple BT-36 application

Sensor is used in the engines

ВТ-36 ВК-2500 (series 1),ТВ3-117ВМА-СБМ1В,ТВ3-117ВМА-СБМ1В (series 1),ТВ3-117ВМА-СБМ1В (series 2),ТВ3-117ВМА-СБМ1В 4/4E

Aircraft industry

ВТ-98

Breaking temperature sensor

SENSORS AND TRANSDUCERS Aircraft industry

Two-channel breaking temperature sensor is designed to produce electric signals, that are proportional to the measured air temperature, and sending them to digital and analogous automatic control systems. Effective measured temperature range –60 … +300 CNominal static characteristic of the sensor is Pt 50 (GOST 6651, IEC 751)Measurement accuracy of the sensor in the temperature range –60 … +25 C

δ = ± (0.35 + 5 ·10-3 | t| ), where δ is sensor accuracy, in °С, t is measured temperature, in °С.

Measurement accuracy of the sensor in the temperature range +25 … +300 Cδ = ± (0.5 + 5 ·10-3 | t| ),

Index of thermal inertia (time constant) 1.4 s(air flow velocity 150 m/s and static pressure up to 98 kPa) Weight 0.15 kgQuantity of independent electrical signals 2Operating life 13 years

ВТ-98



BT-98 outline drawingBT-98 view

ВТ-98



Breaking temperature sensor BT-98 application


ВТ-98 АИ-450М1, АИ-450М2,АИ-450С, АИ-450-С2,АИ-450С, АИ-450С2,АИ-450МС, МС-500В, МС-14, Д-336 (in ГТЭ МС-2,5),ТВ3-117-ВМА-СБМ1В, series 1,МС-500В, АИ-450М

ВТ 306

Pressure sensors and differential pressure switches

Measuring range

SPECIFICATION VALUE

Working temperature range from +60оС till -196оС



from 0,1 till 5,0 kgf/cm2

It is assigned for transformation of fast-varying pressure of liquid and gaseous media to electric signal

Working frequency range from 11,2 Hz till 11 000 Hz

Switch sensitivity Not less than 50 mV/kgf cm2

Slowly varying pressure range from 0,5 till 5,6 kgf/cm2


ВТ 308

Pressure sensors

Measuring range

SPECIFICATION VALUE

Working temperature range from +80оС till -196оС



from 1,2 till 56 kgf/cm2


Working frequency range from 11 Hz till 10 000 Hz

Transducer sensitivity not less than 4 mV/kgf cm2

Slowly varying pressure range from 110 till 1250 kgf/cm2


ВТ 309

Pressure sensors

Measuring range

SPECIFICATION VALUE

Working temperature range from 77 К till 473 К



from 2,5 till 50 kgf/см2



Transducer sensitivity Not less than 10 mV/kgf cm2



ЛХ 612М

Pressure sensors

Measuring range

SPECIFICATION VALUE





It is assigned for transformation of fast-varying pressure of liquid or gaseous non-aggressive media to electric signal





ЛХ 611АМ

Pressure sensors

Measuring range

SPECIFICATION VALUE










ЛХ 611М

Pressure sensors

Measuring range

SPECIFICATION VALUE





It is assigned for transformation of fast-varying pressure of liquid or gaseous non-aggressive media to electric signal



Slowly varying pressure range от 40 до 630 kgf/cm2


ВТ 222М

Pressure sensors

Upper limit of the absolute pressure effective range, for various versions:

SPECIFICATION VALUE

Basic error, from the upper limit of effective range not more than ± 2,5 %


0 - 1500 mm Hg

It is assigned for measuring of static and slowly varying pressure of gaseous media and of vapor phase.

Supply voltage is 27 VDC.

The sensor preserves its performance capability under the temperature of environment up to +50оС


ВТ 219

Pressure sensors

Absolute pressure effective range, for various versions:

SPECIFICATION VALUE

Working temperature range from -500С till +500С


(0-0,16;0-0,30; 0-0,60) х 105 Pa

It is assigned for measuring of absolute pressure of working media: gaseous or vapor phase.


Initial output signal, equivalent to unit supply voltage at the receiving chamber pressure of 13,3 Pa (0,1 mm Hg)

in the range ± 0,15 mV/V

Overall dimensions 87 х 60 mm


ВТ 220

Pressure sensors


SPECIFICATION VALUE


(0-1,25;0-2,5; 0-5) 105 Pa

It is assigned for measuring of absolute pressure of working media: gaseous or vapor phase.



in the range ± 0,15 mV/V



ДАВ 68

Pressure sensors


SPECIFICATION VALUE



(0-0,3;0-0,6;0-1,25;0-2,5;0-5,0;0-10;0-16) х 105 Pa

It is assigned for measuring of absolute pressure in liquid and gaseous media



in the range ±0,15 mV/V



ВТ 206

Pressure sensors

Measuring pressure range

SPECIFICATION VALUE

Measurement accuracy not more than 0,8%


from 0 till 60 MPa,12 ranges (0-1,0; 1,4; 2,0 ;2.8; 4,0; 5,6;

8,0; 11,0; 16,0; 22,0; 30,0; 45,0; 60,0) MPa

It is assigned for measuring of statico-dinamic pressure.

The sensor is of tensoresistive membrane type. The sensing element is thin-film bridge circuit.The sensor is used with the secondary data-processing equipmentSupply voltage is 6 VDC

Output signal +9 mV


Working frequency range from 0 till 200 Hz



ВТ 212

Pressure sensors


SPECIFICATION VALUE

Measurement accuracy not more than 0,6%


from 0 till 125,0 MPa,(0-1,0;1,4;2,0;2.8;4,0;5,6;8,0;11,0;

16,0;22,0;30,0;45,0;60,0;90,0;125,0) MPa

It is assigned for measuring of statico-dinamic pressure.

There are two version, with heat exchange bushing and without it; and 13 ranges of the rated pressure.Supply voltage is 6 VDC.

Output signal +9 mV




The sensor is of tensoresistive membrane type. The sensing element is thin-film bridge circuit.The sensor is used with the secondary data-processing equipment


ВТ 1201

Pressure sensors


SPECIFICATION VALUE

Measuring mean square deviation ±0,25%


from 0,5 till 180,0 MPa,(0-1,0;1,4;2,0;2.8;4,0;5,6;8,0;11,0;16,0;22,0;

30,0;45,0; 60,0;90,0;125,0;180,0) MPa

It is assigned for the measuring of excess pressure and pressure, that rising with gradient up to 1000 MPa/s. measured media: gases, vapor and liquids.


Overall dimensions: - amplifier - transducer

25 х 76 mm30 х 76 mm

Working temperature range from -500С till +500С Output signal: amplitude 2,8..5 V, frequency 15..22 kHz.

It has 27 versions in dependence of material (flexible tube of ТКР and rigid tube of 12Х18Н10Т) and length of a jumper and the value of a measured pressure.


ВТ 1202

Pressure sensors


SPECIFICATION VALUE

Measuring mean square deviation ±0,15%


from 0,5 till 60,0 MPa, (0-1,0;1,4;2,0;2.8; 4,0;5,6;8,0; 11,0;16,0;

22,0;30,0;45,0;60) MPa

It is assigned for the measuring of excess static and slow varying pressure and pressure. Measured media: vapor and liquids.


Overall dimensions: - amplifier - transducer

25 х 76 mm30 х 76 mm


It has 27 versions in dependence of length of a jumper cable (0.5 m, 1 m, 1.5 m) and the value of a measured pressure.Output signal: amplitude 2,8..5 V, frequency 15..22 kHz.


ДАТ-12АЭ2

Pressure sensors


The transducer is designed for remote measuring of absolute pressure of neutral liquids and gases, including:Fuels Т-1; Т-5; ТС-1; ТС-1Г; РГ-1; Т-7П; Т-8;

Т-8В, and other aviation fuels; Oils ВНИИНП-50-4Ф; МС-8РК36/1; МК-8; air and other aviation oils.

the transducer sends signals to the engine regulator or to control devices.

Absolute pressure transducer

СПД-0,4

Maximal working pressure

SPECIFICATION VALUE

Triggering pressure

Current across contacts 0,3А

0,45 MPa

Differential pressure switch

The switch is designed for inspection of clogging of fuel, oil, and hydraulic filters and generating a signal to the warning lamp.

Measured media: aviation fuel and oil

DC voltage

0,04 MPa

Triggering accuracy ±0,01 MPa

27 V±10%


Inspected medium temperature – 60 … +175 °С

Mass 0.1 kg

Aircraft industry


СПД-1,0


SPECIFICATION VALUE

Triggering pressure

Current across contacts 0,3 A

0,45 MPa




DC voltage

0,10 MPa

Triggering accuracy ±0,02 MPa

27В±10%

Maximal pressure drop 0,13 MPa

Inspected medium temperature от -60 до +175 0С

Mass

from -60 till +175 0С

not more than 0,1 kg



СПД-0,6


SPECIFICATION VALUE

Triggering pressure

Current across contacts 0,3 A

0,45 MPa




DC voltage

0,06 MPa

Triggering accuracy ± 0,012 MPa

27В±10%

Maximal pressure drop 0,13 MPa

Inspected medium temperature от -60 до +175 0С

Mass

from -60 till +175 0С





Differential pressure switch application

Switch Is used in the engines

СПД-0,4; СПД-0,6; СПД-1,0 АИ-25, Д-27, АИ-222-25,АИ222К-25, АИ-222К-25Ф,ТВ3-117ВМА-СБМ1, ТТМ-25,АИ-450М, АИ-450М1,АИ-450С, АИ-450-С2, Д-436-148, Д-436-Т1, Д-436-ТП, Д-136-2, Д-36 (all series), Д-136 (all series),combustion-oil unit 317070500


Aircraft industry


Small size pressure switch

МСД (-А , -С, -М, -Т)

The switch is designed for contact breaking (contact closure) of the electric circuit when the pressure of the working medium in the input unit of the switch reaches triggering (actuation) level.

Product code without letter A (e.g. МСД) means the variant of switch with normally closed contacts (without pressure);a)Product code with letter A (e.g. МСД-А) means the variant of switch with normally open contacts (without pressure); b)Product code with letter C (e.g. МСД-С) means the switch with special connecting pipe;c)Product code with letter M (e.g. МСД-М) means the switch for higher temperature;d)Product code with letter C (e.g. МСД-С) means the switch with extended precision. Point of adjustment 0.05; 0.12; 0.15; 0.16; 0.17; 0.25 MPaError of activation (for a point of adjustment):

0.05 MPa ±0.02 MPa0.12; 0.15; 0.16 MPa ±0.03 MPa0.25 MPa ±0.045 MPa(Т) 0.05 Mpa ±0,01 MPa(Т) 0.17 MPa ±0,015 MPa

Direct current voltage 27 V ±10%Current across contact:

with resistive load 1.5 Awith inductive-resistive load 0.5 A

Measured medium temperature (for variants):МСД (-А) – 60 … +180 CМСД (-А) –М – 60 … +220 C

Weight (for variants):МСД (-А) 0.18 kgМСД (-А) –С 0.22 kg



МСД (-А , -С, -М, -Т)

Image of МСД(-А, -С, -М, -Т) Outline drawing for МСД(-А, -С, -М, -Т) and their seats


Small size pressure switch application

Switch Is used in the engines

МСД (-А , -С, -М, -Т) АИ-9, АИ-9В, АИ-9К, АИ-9В (series 1), АИ-25, Д-27, АИ-222-25, МС-14, МС-500В (all modifications), АИ222К-25, АИ-222К-25Ф,ТВ3-117ВМА-СБМ1, ТТМ-25,АИ-450М, АИ-450М1, АИ-450С, АИ-450-С2, Д-18Т (all series),Д-436-148, Д-436-Т1, Д-436-ТП, Д-27, Д-136-2, Д-36 (all series), Д-136 (all series), ТВ3-117 (all modifications),ГТЭ-МС-2,5, ГТЭ-МС-6,3/МС, ГТЭ-МС-8/МС

Aircraft industry


МСД (-А , -С, -М, -Т)

ДХС 516

Датчики звуковых давлений

The sensor is assigned for conversion of acoustic pressure of gaseous medium to electric signal

SPECIFICATION VALUE



Effective acoustic pressure measuring range from 200 till 63240 Pa


Slowly varying pressure range from 0,5 till 16 kgf/cm2

Sensibility 600 ± 350 mV/kgf cm


ДХС 517

Датчики звуковых давлений

The sensor is assigned for conversion of acoustic pressure of gaseous medium to electric signal

SPECIFICATION VALUE



Effective acoustic pressure measuring range from 30 till 35480 Pa

Storage warranty period хранения 10 years

Slowly varying pressure range from 0,1 till 2 kgf/cm2

Sensibility 5000 ± 3000 mV/kgf cm .

Working temperature range from 203 till 473 К


ИС-144

It is assigned for measuring of rotary speed of shafts within the range of 0 - 21000 ± 1000 rpm; one closing or disjunction of the contacts takes place every 50 ±10 turns of the input shaft

Measuring number of turns

SPECIFICATION VALUE

Electric circuit resistance on the assumptions of open contacts

not less than 10 MOhms

Mass 650±30 g

0 - 21000 ± 1000 rpm

Transient resistance of closed contacts, at current of 300 A under normal conditions

not more than 0,5 Ohms




Rotation velocity sensors

ИС-513

It is assigned for measuring of rotary speed from 1000 till 40 000 rpm



ВТ 1850

It is assigned for conversion of shaft rotary speed to pulse-repetition frequency of electric pulses. Monitored rotary speed range is more then 3000 rpm.

SPECIFICATION VALUE

Output signal amplitude (with non-magnetic screen of thickness not more than 1,7 mm)

not less than 100 mV


Monitored rotary speed range more than 3000 rpm

Overall dimensions 9,8 х 500 х 49,2 mm



ВТ 1856

It is assigned for conversion of shaft rotary speed to pulse-repetition frequency of electric pulses.

The transducer is hermetic.

SPECIFICATION VALUE

Output signal amplitude (with non-magnetic screen of thickness not more than 1 mm)

not less than 100 mV



Environment temperature 1000С



ОГ018

It is assigned for conversion of shaft rotary speed to pulse-repetition frequency of electric pulses. Monitored rotary speed range is more then 1000 rpm.

SPECIFICATION VALUE

Output signal amplitude (RH is not less than 10 kOhms andСH is not more than 10000 pF)

from 0,15 till 10 V


Overall dimensions 600 х 24,5 ; 1000 х 24,5 mm



ВТ-10



Rotation velocity sensor ВТ-10 is designed for measuring of angular velocity of a rotor and sending of relevant signal, that is similar to sinusoidal one, to control system. The sensor operates with the inductor which is a cogwheel made from the steel 14ХГСН2МА-Ш or 30Х2Н2ВФМА-Ш; number of teeth is 61, module is 2.5, and tooth length is 16 mm. The working cogwheel may be used as inductor.The voltage amplitude of the sensor on the active load 2 kOhms:-with the rotational velocity 1400 revolutions per minute and the radial gap between the end face of the sensor and the inductor 1.3 mm 0.2 V;-with the rotational velocity 14200 revolutions per minute and the radial gap between the end face of the sensor and the inductor 0.7 mm 10.0 VResistance of the winding of the sensor at normal conditions 27040 Ohms;Warranty storage period 3 years Warranty operation life 7 years after putting into operation subject to storage periodWarranty life 1000 hours for the engine Д-36 and 8000 hours for other engines Operating temperature –60 … +250 СVibration frequency 10 … 4000 Hz (with overloading up to 100g)Weight 0.1 kgConnecting to the load by soldering of two connecting wires (with cross-section 0.75 mm2) to the finger contacts of the sensor

Aircraft industry


ВТ-10


Aircraft industry


ВТ-10 ВК-2506, ТВ3-117ВМА-СБМ1, ТВ3-117ВМА-СБМ1-4 (4Е),ТВ3-117 (all models)

Rotation velocity sensor application


ВТ-15


Rotation velocity sensor ВТ-15 is designed for measuring of angular velocity of a rotor and sending of two relevant independent electric signals, that are similar to sinusoidal ones, to control system. The sensor operates with the inductor which is a cogwheel made from the steel 20Х13; number of teeth is 32, module is 5, and tooth thickness is 15 mm. The working cogwheel may be used as inductor.The voltage amplitude of the sensor on the active load 20.2 kOhms as in the following table:

Linear velocity of inductor

(addendum circle), m/s

Rotation frequency of

inductor, 1/min (frequency of

output signal, Hz)

Amplitude of output signal, V, Gap between the end face of the

sensor and inductor, mm

At any service conditions

At normal service

conditions

0.9 100 (53) 0.05 0.06 0.7 2.5 280 (150) 0.2 0.25 0.7 4.0 450 (240) 0.3 0.35 0.7 8.5 960 (512) 0.7 0.9 0.7 15.5 1740 (928) 0.85 1.1 0.7

40.0 4490 (2395) 1,5 1.75 0.7 15 15 0.3

300 28125 (15000) 1.6 2.0 0.7 30 30 0.3

Aircraft industry

ВТ-15 (М)



Resistance of the winding of the sensor at normal conditions 477 Ohms;Operation life 30,000 hours in the course of 15 yearsOperating temperature –60 … +180 СVibration frequency 5 … 2000 Hz (with overloading up to 30g)Weight 0.2 kgConnecting to the load by connector СНЦ28-4/14

ВТ-15 ВТ-15М

Aircraft industry


ВТ-15 (М)



ВТ-15 (М) АИ9-3Б, АИ-450М, АИ-450М1,АИ-450М2, АИ-450С, АИ-450С2,ТВ3-117ВМА-СБМ1, АИ-222К25,Д-436ТП, Д-436ТП-М, ТПМ

Aircraft industry

Rotation velocity sensor application


ВТ-1004


Rotation velocity sensor ВТ-1004 is designed for measuring of angular velocity of a rotor and sending of two relevant electric signals, that are similar to sinusoidal ones, to control system. The sensor operates with the inductor which is a cogwheel made from the steel 30Ч2ВМФА-Ш; number of teeth is 61, module is 2.5, and tooth length is 16 mm. The working cogwheel may be used as inductor.The voltage amplitude of the sensor on the active load 2 kOhms:-with the rotational velocity 1400 – 6000 revolutions per minute and the radial gap between the end face of the sensor and the inductor 1.3 mm 0.4 V;-with the rotational velocity 6000 - 14200 revolutions per minute and the radial gap between the end face of the sensor and the inductor 1.1 mm 16.0 VResistance of the windings of the sensor at normal conditions:

coil 1 365 Ohms;coil 2 9010 Ohms

Subject to the cable (resistance is approx. 0.72 Ohms/m)coil 1 416 Ohms;coil 2 9511 Ohms

Operation life 40,000 hours in the course of 40 yearsOperating temperature –60 … +350 СVibration frequency 5 … 2000 Hz (with overloading up to 30g)Weight 0.2 kgConnecting to the load by the 4-wire cable in non-magnetic braided shield

Aircraft industry


ВТ-1004


Aircraft industry

ВТ-718

Linear displacement sensors

It is assigned for measuring of linear displacements of a blocks of mechanical systems, and their conversion to electric signal

SPECIFICATION VALUE


Measuring range0-16 mm, 0-22 mm, 0-30 mm, 0-45 mm, 0-60 mm,

0-90 mm, 0-125 mm, 0-180 mm, 0-250 mm,0-350 mm, 0-500 mm, 0-700 mm, 0-750 mm.

Cable length 515±15 mm

Transducer supply voltage 6±1 VDC

Overall dimensions 33,5 х 40 х 90 mm

Basic error not more than 2%


ВТ-721 (VT-721)


It is assigned for conversion of linear displacements of parts of a product to electric signal

SPECIFICATION VALUE


Measuring range0-0,5 m, 0-1,0 m, 0-1,4 m, 0-2,0 m, 0-4,0 m,

0-5,6 m, 0-8,0 m, 0-11 m, 0-16 m


Transducer supply voltage 6±1 ВVDC

Overall dimensions 43,5 х 76 х 120 mm

Basic error ±1%


ВТ-714

It is assigned for measuring of linear and angle (in two perpendicular planes) displacements of a blocks of mechanical systems, and their conversion to electric signal

SPECIFICATION VALUE

Mass not more than 1 kg

Measuring range: - along paths - along angles

0-16 m ±700



Overall dimensions 56 х 120 х 133 mm

Basic error: - along linear displacements - along angle displacements

not more than 1%not more than 2%



ВТ-712

It is assigned for measuring of angle (in one plane) displacements of a blocks of mechanical systems, and their conversion to electric signal

SPECIFICATION VALUE






Measuring range (radians, degrees)0-1,12 (0-64), 0-1,60 (0-92), 0-2,20 (0-126),

0-3,20 (0-183), 0-4,40 (0-252), 0-6,00 (0-344), 0-9,00 (0-516), 0-12,00 (0-688)



ВТ-713

It is assigned for measuring of linear displacements of blocks of a product and their conversion to electric signal

The transducer is meant for joint operation with a recording device which has input resistance not less than 500 kOhms

SPECIFICATION VALUE


Transducer supply voltagr 6±0,2 VDC

Static error under operation conditions not more than 2%

Measuring range 0-5,6 mm, 0-8 mm, 0-11 mm, 0-16 mm,

0-22 mm, 0-30 mm, 0-45 mm



ПЛХ 001

Contactless displacement sensor

It is assigned for positional checking of movable operating elements of executive mechanisms of technological equipment.

The sensor is meant for expose to oils of type АМГ-10. The distance between two adjacent one-type sensors is not less than their diameter, and between different-type sensors is not less than the bigger sensor diameter.

SPECIFICATION VALUE

Actuation repeatability accuracy


Sinusoidal vibrations exposureacceleration amplitude 100 m/s2

frequency 55-60 Hz

Supply voltage ripple factor in the frequency band20 - 1000 Hz not more than 6%

Switching speeds not more than 1000 Hz

Environment temperature from -20 till +700С

Relative humidity, at temperature 25±10 оC up to 80%

Air pressure 645 - 795 mm Hg

Actuation zone, with effecting element from steel 20 , under supply voltage 24 VDC 1; 2; 3,5; 4,7 mm,

dependent of the range

±0,03 mm

Warm-up time not more than 30 s

Mass

Service life is 107 cyclesRunning hours – 18000 hours.


ВТ-51 (VT-51)

Accelerometers

It is assigned for measuring of linear acceleration

SPECIFICATION VALUE

Mass not more than 0,5 кг

Supply voltage 27 (+7;-4) В

Basic error ± 3%

Measuring rangefrom ± 11m/s2 till 4 000 m/s2

frequency ranges (0-8, 0-16, 0-32, 0-64, 0-256) Hz.

Output voltage 0…6 В


СД 722 (SD722)

It is assigned for measuring of pressure

Operation threshold is 35 kgf/cm2


Special designation sensors

СИД 716 (SID716)

It is assigned for measuring of excess pressure

Operation threshold is 0,8 ± 0,1 kgf/cm2



ДИД 707 (DID707)

It is assigned for measuring of excess pressureIn the range 0 – 160 kgf/cm2



ДР 718 (DR718)

Negative pressure sensor

Working range is 0 - 0,25 kgf/cm2



ДРД (DRD)


Pressure difference sensor

Working ranges: 0,125+0,125; 0…6; 0…0,025; 0…0,15; 0…0,25 kgf/cm2


ЛХ 5556

SPECIFICATION VALUE

Irregularity of the frequency response


Number of the fixed measuring ranges 5

Working temperature range от -50 до +500С

Relative humidity at temperature 25±10 оC до 98%

Air pressure 2 atm.

Linearity of amplitude characteristic accuracy (from 6 В) ±0,4%

1,5%

Mass

The transducer is assigned for joint working with isometric sensors of type of Лх, Вт (bridge circuits with a branch resistance 700±35 Ohms and starting unbalance of ±60%. \

It has dust-ignition-proof construction.

It has four measuring channels which are identical and mutually independent.

Supply voltage 27 (+7;-4) VDC

Number of frequency ranges7: : 0-16, 0- 32, 0-64, 0-125, 0-250, 0-500 and 0-700 Hz


Transducers

Space industry

ВТ 5611 (VT5611)

The transducer Вт5611 is assigned for measuring of rotary speeds


Transducers

Space industry

Transducers


ВТ 5611 (VT5611)

The transducer Вт5611 is assigned for measuring of rotary speeds, it operates jointly with an inductive sensors which have the output voltage from 0,06 V till 10 V (ИС-513, ОГ 018 et al.).

The transducer is resistant to vibrations, strokes, linear accelerations, acoustic noise. It has the checking circuit for ‘sensor – transducer” input circuit monitoring.

Measuring range 25 … 10 000 HzOutput signal 0 … 60.2 VAccuracy not more than 1.6%Supply voltage 28 (+6, -4) VDCCurrent consumption not more than 0.22 AOperating temperature range from –50 till +50 CNumber of channels 2Service life 200 hoursCable length:

sensor – transducer up to 40 mtransducer – recorder up to 70 m

Overall dimensions 55х130х73 mmMass 1,35 kg

УРАН (URAN)

The transducer is assigned for measuring of liquid medium level .It operates jointly with ultrasonic level sensors.

Output information is represented as binary parallel code which has two service bits and 12 informational bits, of TTL levels


Transducers

Space industry

Level of liquid measuring range 70…2000 mm (it depends by the sensor))Supply voltage 27(+7, -4) VDC Consumption current not more than 0.3 AWorking temperature range from -50 till +50 CService life 2000 hoursOverall dimensions 131х122х80 mmMass not more than 1,5 kg

ПРИНТ (PRINT)

The transducer is assigned for conversion of signals from thermometers (both resistance and thermoelectric ones) into input analog and digit signals for control systems


Transducers

Space industry

ПРИНТ-01 (PRINT-01)

The transducer is assigned for conversion of signals from thermometers (both resistance and thermoelectric ones) into input analog and digit signals for control systems


Transducers

Space industry

Transducers


Main technical data ParametersTolerance, %, not more than

Digit output for thermoresistanes 0,15Digit output for thermocouples 0,45Analog output for thermoresistanes 0,25Analog output for thermocouples 0,45

Supply voltage, V 27Output signal Analog output, V 0 .. 6,2Digit output 12 position code

Switching regimesAutonomous and

synchronous Measuring scales 7 resistive and one voltageOperating temperature range, C –50 .. +50Current consumption, mA, no more than 70Number of switched channels 32Warranty resource, hours 2000Weight, kg 1,1

ПРИНТ-01 (PRINT-01)

ПСТД (PSTD)

Transducer is designed for voltage supplying of pressure sensors (of type of VT 206, VT 212 et al) and for conversion of their signals into input signals for control systems

SPECIFICATION VALUE


Measuring range of ΔR/R (2,8; 5,6; 16)·10-3

Sensor supply voltage 6 V

Output signal 0…6 В

Frequency range from 0 till 16; 31,5; 63; 125; 250; 500; 1000 Hz

Supply voltage 28(+5,-4) VDC

Consumption current not more than 110 mA

Working temperature range from -50 till +500С



Transducers

Space industry

Transducers


ПСТД (PSTD)

SPECIFICATIONVALUE

Maximal frequency range, Hz 0 – 1000Tolerance, %, not more than 0,5Supply voltage, V 28Output signal range, V 0 .. 6Operating temperature range, C –50 .. +50Current consumption, mA, no more than 110Number of channels 4Resource time, hours 500Weight, kg 0,61Number of variants (depends on frequency range)

7

СИП (SIP) Displacement measuring system СИП is assigned for conversion of a contactless measured axial clearance of a shaft to a standard electric signal for the emergency shutdown system.

СИП consists of inductive- transformer sensor of linear displacements and of amplifying and converting block, that are connected by a jumper cable of length 5000 mm.

SPECIFICATION VALUE

Measuring range 0,1-2,8 мм

Basic error not more than ±2%

Initial output signal 0,25±0,25 В

Supply current 27(+7,-3)В

Consumption current not more than 100 мА

Working temperature range : - for the inductive sensor - for the converter

from -100 till +500Сfrom -50 till +500С


Nominal output signal 6 В

Nonlinearity of calibration characteristic: - in whole rangeв - in the portion from 0,1 till 2,2 мmm

not more than ±15%not more than ±12%

Vibration accelerations: - for the inductive sensor - for the converter

up to 1500 m/s2

up to 400 m/s2


Transducers

Space industry

Тритон-7008

SPECIFICATION VALUE

not more than 1 kg

Measuring voltage range 0,6-1,15 V

Supply voltage 27(+5,-4) VDC

Current consumption not more than 250 mA

Mass

Transducer is designed for conversion of signals from semiconductor temperature sensors into input signals for control systems (i.g. Ит2000).

FEATURES: continuity test of measuring sensors; operational integrity under destabilizing factors exposure; high reliability; synchronous and autonomous modes

Quantity of sensor channels 8 channels

Working temperature range from -40 till +50 0С

Sensor supply current 100±0,1 A

Measuring accuracy not more than 0,16%

Output signal 16 bit parallel binary code, pulse duration 10 ms (20 ± 2; 40 ± 4) ms;- Sequential 20 position digit code;Logical «0» level – (0 –1) V, logical «1» level – (4 – 5) V


Transducers

Space industry

3D200

The transducer of linear and angular displacements of pipelines 3D200.It is assigned for measuring of linear and angular displacements (in perpendicular planes) of technological equipment (pipelines) and their transformation into electrical signal that is proportional to displacements.It is used in power plant equipment.

SPECIFICATION VALUE

Basic error: - linear displacements - angular displacements

not more than 1,5%not more than 2%

Measuring range: - linear displacements - angular displacements

0-220 mm±700

Mechanical connection with the unit under measurement Metal wire rope Ø 0,65 mm

Overall dimensions 217 х 234 х 139 мм

Mounting dimensions 4 slots 6,460 mm (axle base is 191 mm)

Supply voltage 6±1 V, DC

Mass of the transducer not more than 5,8 кг


Transducers

Power plant industry

Transducers


LIMITED LIABILITY COMPANY"SENSOR ENTERPRISE "ZAVOD RAPID“

25, Odintsova str.,Chernigov Ukraine 14030

phone (+38 04622)3-23-49, fax (+38 04622)3-16-12

website: www.rapid.cn.uae-mail: [email protected]