TTHHÖÖ VVIIEEÄÄNN TTRRÖÖÔÔØØNNGG ÑÑAAÏÏII HHOOÏÏCC CCOOÂÂNNGG NNGGHHIIEEÄÄPP TTPP.. HHCCMM
--------------------
SSAAÛÛNN PPHHAAÅÅMM TTRRÍÍCCHH BBAAÙÙOO TTAAÏÏPP CCHHÍÍ
KKHHOOAA HHOOÏÏCC && CCOOÂÂNNGG NNGGHHEEÄÄ
TTiieeââuu cchhuuaaåånn KKhhooaa hhooïïcc –– CCooâânngg nngghheeää
VViieeäätt NNaamm && TThheeáá ggiiôôùùii 1122//22001155
1122//22001155
hhttttpp::////lliibb..iiuuhh..eedduu..vvnn
TIÊU CHUẨN QUỐC GIA (TCVN) .......................................................... 3
SƠN ................................................................................................................................. 3
THỦY LỢI ..................................................................................................................... 3
ĐƯỜNG BỘ ................................................................................................................... 3
TIÊU CHUẨN NƯỚC NGOÀI ................................................................... 3
CÔNG NGHỆ THÔNG TIN ........................................................................................ 3
ĐIỆN – ĐIỆN TỬ- THIẾT BỊ ...................................................................................... 5
CÁP THÔNG TIN ....................................................................................................... 10
PHƯƠNG TIỆN GIAO THÔNG - VẬN TẢI ........................................................... 10
TÀU THỦY .................................................................................................................. 11
CƠ KHÍ - CHẾ TẠO ................................................................................................... 11
MÁY NÔNG NGHIỆP ................................................................................................ 13
LUYỆN KIM ................................................................................................................ 13
XÂY DỰNG - VẬT LIỆU XÂY DỰNG .................................................................... 14
HÓA HỌC .................................................................................................................... 15
DỤNG CỤ THÍ NGHIỆM .......................................................................................... 15
CHẤT DẺO .................................................................................................................. 16
SƠN ............................................................................................................................... 16
DẦU MỎ....................................................................................................................... 16
NHIÊN LIỆU SINH HỌC RẮN ................................................................................. 16
GỖ - SẢN PHẨM GỖ ................................................................................................. 17
DỆT ............................................................................................................................... 17
THUỐC LÁ .................................................................................................................. 18
SỮA ............................................................................................................................... 18
Y TẾ - THIẾT BỊ Y TẾ .............................................................................................. 18
THIẾT BỊ THỂ THAO ............................................................................................... 19
CHẤT LƯỢNG NƯỚC .............................................................................................. 19
MÔI TRƯỜNG – AN TOÀN ..................................................................................... 19
THIẾT BỊ BẢO HỘ .................................................................................................... 21
QUẢN LÝ – SẢN XUẤT ............................................................................................ 21
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
TIÊU CHUẨN QUỐC GIA (TCVN)
SƠN
Trở về đầu trang
1 TCVN 10833:2015 Bột kẽm sử dụng trong sơn. Yêu cầu kỹ thuật và
phương pháp thử
18
THỦY LỢI
Trở về đầu trang
2 TCVN 10405:2014 Công trình thủy lợi - Đai cây chắn sóng - Khảo sát và
thiết kế
23
3 TCVN 9904:2014 Công trình thủy lợi. Công trình ở vùng triều. Yêu cầu
tính toán thủy lực ngăn dòng
54
4 TCVN 9901:2014 Công trình thủy lợi. Yêu cầu thiết kế đê biển 127
5
ĐƯỜNG BỘ
Trở về đầu trang
6 TCVN 11013:2015 Phương tiện giao thông đường bộ. Đèn báo rẽ trên ô
tô,rơ moóc và sơ mi rơ moóc. Yêu cầu kỹ thuật và
phương pháp thử
22
7 TCVN 11011:2015 Phương tiện giao thông đường bộ. Độ bền của xe mô
tô, xe gắn máy. Yêu cầu và phương pháp thử
21
8 TCVN 11012:2015 Phương tiện giao thông đường bộ. Độ tin cậy của xe
mô tô, xe gắn máy. Yêu cầu và phương pháp thử
21
9 TCVN 10832:2015 Vật liệu kẻ đường phản quang. Màu sắc. Yêu cầu kỹ
thuật và phương pháp thử
13
TIÊU CHUẨN NƯỚC NGOÀI
CÔNG NGHỆ THÔNG TIN
Trở về đầu trang
10 ISO 19160-1:2015 Addressing -- Part 1: Conceptual model 57
11 ISO/PAS 19450:2015 Automation systems and integration -- Object-
Process Methodology
162
12 ISO 12632:2015 Graphic technology -- Ink, paper and labels --
Requirements on hot alkali penetration and resistance
4
13 ISO/IEC 18328-1:2015 Identification cards -- ICC-managed devices -- Part
1: General framework
18
14 ISO/IEC 7811-9:2015
Replace: ISO/IEC 7811-
9:2008
Identification cards -- Recording technique -- Part 9:
Tactile identifier mark
3
15 ISO 11799:2015
Replace: ISO
11799:2003
Information and documentation -- Document storage
requirements for archive and library materials
12
16 ISO 7098:2015 Replace:
ISO 7098:1991
Information and documentation -- Romanization of
Chinese
19
17 ISO/IEC TR 18121:2015 Information technology -- Learning, education and
training -- Virtual experiment framework
18
18 ISO/IEC 11179-1:2015
Replace: ISO/IEC
11179-1:2004
Information technology -- Metadata registries (MDR)
-- Part 1: Framework
22
19 ISO/IEC 23001-12:2015 Information technology -- MPEG systems
technologies -- Part 12: Sample Variants in the ISO
base media file format
14
20 ISO/IEC 18477-3:2015 Information technology -- Scalable compression and
coding of continuous-tone still images -- Part 3: Box
file format
8
21 ISO/IEC TR 20004:2015
Replace: ISO/IEC TR
20004:2012
Information technology -- Security techniques --
Refining software vulnerability analysis under
ISO/IEC 15408 and ISO/IEC 18045
17
22 ISO/IEC TR 20000- Information technology -- Service management -- 47
11:2015 Part 11: Guidance on the relationship between
ISO/IEC 20000-1:2011 and service management
frameworks: ITIL®
23 ISO/IEC/IEEE 8802-
A:2015
Information technology -- Telecommunications and
information exchange between systems -- Local and
metropolitan area networks -- Part A: Overview and
architecture
56
24 ISO/IEC 11889-1:2015
Replace: ISO/IEC
11889-1:2009
Information technology -- Trusted Platform Module
Library -- Part 1: Architecture
256
25 ISO/IEC 11889-2:2015
Replace: ISO/IEC
11889-2:2009
Information technology -- Trusted Platform Module
Library -- Part 2: Structures
159
26 ISO/IEC 11889-4:2015
Replace: ISO/IEC
11889-4:2009
Information technology -- Trusted Platform Module
Library -- Part 4: Supporting Routines
565
27 ISO/IEC 11889-3:2015
Replace: ISO/IEC
11889-3:2009
Information technology -- Trusted Platform Module
Library -- Part 3: Commands
457
28 ISO/IEC 19845:2015 Information technology -- Universal Business
Language Version 2.1 (UBL v2.1)
145
29 ISO/IEC 24800-
3:2010/Amd 1:2015JP
Search API 11
30 ISO/IEC/IEEE 29119-
4:2015
Software and systems engineering -- Software testing
-- Part 4: Test techniques
139
ĐIỆN – ĐIỆN TỬ- THIẾT BỊ
Trở về đầu trang
31 ISO 18563-3:2015 Non-destructive testing -- Characterization and
verification of ultrasonic phased array equipment --
Part 3: Combined systems
34
32 ISO 19084:2015 Photography -- Digital cameras -- Chromatic
displacement measurements
14
33 IEC 60730-
1:2013/AMD1:2015
Amendment 1 - Automatic electrical controls - Part
1: General requirements
29
34 IEC
62648:2012/AMD1:2015
Amendment 1 - Graphical symbols for use on
equipment - Guidelines for the inclusion of graphical
symbols in IEC publications
9
35 IEC 60730-2-
8:2000/AMD2:2015
Amendment 2 - Automatic electrical controls for
household and similar use - Part 2-8: Particular
requirements for electrically operated water valves,
including mechanical requirements
27
36 IEC 61000-4-
13:2002/AMD2:2015
Amendment 2 - Electromagnetic compatibility
(EMC) - Part 4-13: Testing and measurement
techniques - Harmonics and interharmonics including
mains signalling at a.c. power port, low frequency
immunity test
9
37 IEC 60728-5:2015 Cable networks for television signals, sound signals
and interactive services - Part 5: Headend equipment
188
38 IEC 60603-7-81:2015 Connectors for electronic equipment - Part 7-81:
Detail specification for 8-way, shielded, free and
fixed connectors, for data transmissions with
frequencies up to 2 000 MHz
34
39 IEC TR 62878-2-2:2015 Device embedded substrate - Part 2-2: Guidelines -
Electrical testing
29
40 IEC 62631-3-3:2015 Dielectric and resistive properties of solid insulating
materials - Part 3-3: Determination of resistive
properties (DC methods) - Insulation resistance
32
41 IEC 62631-3-2:2015 Dielectric and resistive properties of solid insulating
materials - Part 3-2: Determination of resistive
properties (DC methods) - Surface resistance and
surface resistivity
34
42 IEC 61000-4-16:2015 Electromagnetic compatibility (EMC) - Part 4-16:
Testing and measurement techniques - Test for
immunity to conducted, common mode disturbances
in the frequency range 0 Hz to 150 kHz
53
43 IEC 60424-4:2015 Ferrite cores - Guidelines on the limits of surface
irregularities - Part 4: Ring-cores
20
44 IEC 60424-2:2015 Ferrite cores - Guidelines on the limits of surface
irregularities - Part 2: RM-cores
25
45 IEC 60424-1:2015 Ferrite cores - Guidelines on the limits of surface
irregularities - Part 1: General specification
25
46 IEC TR 63017:2015 Flexible printed circuit boards (FPCBs) - Method of
compensation of impedance variations
16
47 IEC TR 63018:2015 Flexible printed circuit boards (FPCBs) - Method to
decrease signal loss by using noise suppression
materials
14
48 IEC TR 62687:2015 Graphical symbols for use on equipment -
Vocabulary
13
49 IEC 62601:2015 Industrial networks - Wireless communication
network and communication profiles - WIA-PA
487
50 IEC 60534-2-3:2015 Industrial-process control valves - Part 2-3: Flow
capacity - Test procedures
42
51 IEC TS 62872:2015 Industrial-process measurement, control and
automation system interface between industrial
facilities and the smart grid
63
52 IEC TR 62474-1:2015 Material declaration for products of and for the
electrotechnical industry - Part 1: Guidance for the
implementation of IEC 62474
72
53 IEC 62665:2015 Multimedia systems and equipment - Multimedia e-
publishing and e-books technologies - Texture map
for auditory presentation of printed texts
42
54 IEC 62341-6-2:2015 Organic light emitting diode (OLED) displays - Part
6-2: Measuring methods of visual quality and
ambient performance
46
55 IEC 60393-2:2015 Potentiometers for use in electronic equipment - Part
2: Sectional specification - Lead-screw actuated and
rotary preset potentiometers
53
56 IEC 60393-5:2015 Potentiometers for use in electronic equipment - Part
5: Sectional specification - Single-turn rotary low-
power wirewound and non-wirewound
potentiometers
65
57 IEC 60393-6:2015 Potentiometers for use in electronic equipment - Part
6: Sectional specification - Surface mount preset
potentiometers
57
58 IEC TS 62871-1:2015 Professional video strage products - Tape-less
camera recorder using MXF file format - Encoding
guidelines - Part 1: MXF Operational Pattern
20
59 IEC TS 62257-6:2015 Recommendations for renewable energy and hybrid
systems for rural electrification - Part 6: Acceptance,
operation, maintenance and replacement
20
60 IEC TS 62257-5:2015 Recommendations for renewable energy and hybrid
systems for rural electrification - Part 5: Protection
against electrical hazards
46
61 IEC TS 62257-4:2015 Recommendations for renewable energy and hybrid
systems for rural electrification - Part 4: System
selection and design
72
62 IEC TS 62257-3:2015 Recommendations for renewable energy and hybrid
systems for rural electrification - Part 3: Project
development and management
48
63 IEC TS 62257-2:2015 Recommendations for renewable energy and hybrid
systems for rural electrification - Part 2: From
requirements to a range of electrification systems
65
64 IEC 60034-27-3:2015 Rotating electrical machines - Part 27-3: Dielectric
dissipation factor measurement on stator winding
insulation of rotating electrical machines
55
65 IEC 63004:20153 Standard for receiver fixture interface
143
66 IEC 63003:2015 Standard for the common test interface pin map
configuration for high-density, single-tier electronics
test requirements utilizing IEEE Std 1505™
162
67 IEC 60401-3:2015 Terms and nomenclature for cores made of
magnetically soft ferrites - Part 3: Guidelines on the
format of data appearing in manufacturers catalogues
of transformer and inductor cores
28
68 IECEE TRF 60335-2-
2&54:2015
This Test Report applies to: IEC 60335-2-2:2009
(Sixth Edition) + A1:2012 and IEC 60335-2-54:2008
(Fourth Edition) + A1:2015 for use in conjunction
with IEC 60335-1:2010 (Fifth Edition) + A1:2013
98
69 IECEE TRF 60335-2-
3:2015
This Test Report applies to: IEC 60335-2-3:2012
(Sixth Edition) + A1:2015 in conjunction with IEC
60335-1 2010 (Fifth Edition) incl. Corr. 1:2010 and
Corr. 2:2011 + A1:2013
93
70 IECEE TRF 60335-2-
97:2015
This Test Report applies to: IEC 60335-2-97 :2002
(Second Edition) + A1:2004 + A2:2008 in
conjunction with IEC 60335-1:2010 (Fifth Edition)
incl. Corr. 1:2010 and Corr. 2:2011 + A1:2013
97
71 IECEE TRF 60335-2-
98:2015
This Test Report applies to: IEC 60335-2-98:2002
(Second Edition) + A1:2004 + A2:2008 in
conjunction with IEC 60335-1:2010 (Fifth Edition)
incl. Corr. 1:2010 and Corr. 2:2011 + A1:2013
98
72 IECEE TRF 60669-
1:2015
This Test Report applies to: IEC 60669-1:1998
(Third Edition) + A1:1999 + A2:2006
39
73 IECEE TRF 60730-2- This Test Report applies to: IEC 60730-2-8:2000 20
8:2015 (Second Edition) + A1:2002 for use with IEC 60730-
1:1999
74 IECEE TRF 60838-2-
2:2015
This Test Report applies to: IEC 60838-2-2:2006
(First Edition) +A1:2012
20
75 IECEE TRF 61439-
5:2015
This Test Report applies to: IEC 61439-5:2014
(Second Edition)
76
CÁP THÔNG TIN
Trở về đầu trang
76 IEC 62153-4-15:2015 Metallic communication cable test methods - Part 4-
15: Electromagnetic compatibility (EMC) - Test
method for measuring transfer impedance and
screening attenuation - or coupling attenuation with
triaxial cell
39
77 IEC 62153-4-7:2015 Metallic communication cable test methods - Part 4-
7: Electromagnetic compatibility (EMC) - Test
method for measuring of transfer impedance ZT and
screening attenuation aS or coupling attenuation aC
of connectors and assemblies up to and above 3 GHz
- Triaxial tube in tube method
41
78 IEC 61935-1:2015 Specification for the testing of balanced and coaxial
information technology cabling - Part 1: Installed
balanced cabling as specified in ISO/IEC 11801 and
related standards
113
PHƯƠNG TIỆN GIAO THÔNG - VẬN TẢI
Trở về đầu trang
79 ISO 12855:2015
Replace: ISO
12855:2012; ISO
12855:2012/Cor 1:2013
Electronic fee collection -- Information exchange
between service provision and toll charging
100
80 ISO 11898-1:2015
Replace: ISO 11898-
Road vehicles -- Controller area network (CAN) --
Part 1: Data link layer and physical signalling
65
1:2003; ISO 11898-
1:2003/Cor 1:2006
81 ASTM D913 – 15
Revises: ASTM D913–
10
Standard Practice for Evaluating Degree of Traffic
Marking Line Wear
2
TÀU THỦY
Trở về đầu trang
82 ISO 5488:2015 Replace:
ISO 5488:1979
Ships and marine technology -- Accommodation
ladders
8
83 ISO 7061:2015 Replace:
ISO 7061:1993
Ships and marine technology -- Aluminium shore
gangways for seagoing vessels
11
84 ISO 17905:2015 Ships and marine technology -- Installation,
inspection and maintenance of container securing
devices for ships
25
85 ISO 29404:2015 Ships and marine technology -- Offshore wind
energy -- Supply chain information flow
37
CƠ KHÍ - CHẾ TẠO
Trở về đầu trang
86 ISO/TR 14799-2:2015
Replace: ISO/TR 14799-
2:2005
Comparison of worldwide escalator and moving walk
safety standards -- Part 2: Abbreviated comparison
and comments
55
87 ISO/TR 14799-1:2015
Replace: ISO/TR 14799-
1:2005
Comparison of worldwide escalator and moving walk
safety standards -- Part 1: Rule by rule comparison
166
88 ISO 14878:2015 Cycles -- Audible warning devices -- Technical
specification and test methods
89 ISO 6695:2015 Replace:
ISO 6695:1991
Cycles -- Pedal axle and crank assembly with square
end fitting -- Assembly dimensions
2
90 ISO 18246:2015 Electrically propelled mopeds and motorcycles --
Safety requirements for conductive connection to an
33
external electric power supply
91 ISO 28927-8:2009/Amd
1:2015
Polishing machines, modified feed forces 11
92 ISO/TS 19425:2015 Reciprocating internal combustion engines --
Measurement method for air cleaners -- Sound power
level of combustion air inlet noise and insertion loss
using sound pressure
42
93 ISO 15242-1:2015
Replace: ISO 15242-
1:2004
Rolling bearings -- Measuring methods for vibration
-- Part 1: Fundamentals
16
94 ISO 15242-2:2015
Replace: ISO 15242-
2:2004; ISO 15242-
2:2004/Cor 1:2010
Rolling bearings -- Measuring methods for vibration
-- Part 2: Radial ball bearings with cylindrical bore
and outside surface
7
95 ISO 3245:2015 Replace:
ISO 3245:2007
Rolling bearings -- Needle roller bearings with drawn
cup and without inner ring -- Boundary dimensions,
geometrical product specifications (GPS) and
tolerance values
11
96 ISO 21107:2015
Replace: ISO
21107:2004
Rolling bearings and spherical plain bearings --
Search structure for electronic media --
Characteristics and performance criteria identified by
property vocabulary
31
97 ISO 19353:2015
Replace: ISO
19353:2005
Safety of machinery -- Fire prevention and fire
protection
35
98 ISO 13849-1:2015
Replace: ISO 13849-
1:2006; ISO 13849-
1:2006/Cor 1:2009
Safety of machinery -- Safety-related parts of control
systems -- Part 1: General principles for design
86
99 ASTM F2215 – 15
Revises: ASTM F2215–
Standard Specification for Balls, Bearings, Ferrous
and Nonferrous for Use in Bearings, Valves, and
10
08 Bearing Applications
MÁY NÔNG NGHIỆP
Trở về đầu trang
100 ISO 17989-1:2015 Tractors and machinery for agriculture and forestry --
Sustainability -- Part 1: Principles
15
LUYỆN KIM
Trở về đầu trang
101 ISO 14737:2015
Replace: ISO
14737:2003; ISO
3755:1991
Carbon and low alloy cast steels for general
applications
9
102 ISO 7500-1:2015
Replace: ISO 7500-
1:2004; ISO 7500-
1:2004/Cor 1:2008
Metallic materials -- Calibration and verification of
static uniaxial testing machines -- Part 1:
Tension/compression testing machines -- Calibration
and verification of the force-measuring system
18
103 ISO 26843:2015 Metallic materials -- Measurement of fracture
toughness at impact loading rates using precracked
Charpy-type test pieces
35
104 ISO/TS 18223:2015 Nickel alloys -- Determination of Nickel content --
Inductively coupled plasma atomic emission
spectrometric method
15
105 ISO 4991:2015 Replace:
ISO 4991:2005
Steel castings for pressure purposes 19
106 ISO 6935-2:2015
Replace: ISO 6935-
2:2007
Steel for the reinforcement of concrete -- Part 2:
Ribbed bars
23
107 ASTM A962/A962M –
15 Revises: ASTM
A962/A962M–14a
Standard Specification for Common Requirements
for Bolting Intended for Use at Any Temperature
from Cryogenic to the Creep Range
12
108 ASTM A269/A269M - Standard Specification for Seamless and Welded 7
15a Revises: ASTM
A269/A269M–15
Austenitic Stainless Steel Tubing for General Service
109 ASTM B975 – 15 Standard Test Method for Measurement of Internal
Stress of Metallic Coatings by Split Strip Evaluation
(Deposit Stress Analyzer Method)
8
110 ASTM B636/B636M –
15 Revises: ASTM
B636– 84 (Reapproved
2010)
Standard Test Method for Measurement of Internal
Stress of Plated Metallic Coatings with the Spiral
Contractometer
5
111 JIS G 0582:2015/AMD 1 Automated ultrasonic examination of steel pipes and
tubes ( Amendment 1)
2
112 JIS G 3126:2015 Carbon steel plates for pressure vessels for low
temperature service
15
113 JIS G 3133:2015 Decarburized steel sheets and strip for porcelain
enamelling
16
114 JIS G 0804:2015 Digital radiographic examination with for the weld
seam of welded steel tubes
27
115 JIS G 0555:2015/AMD 1 Microscopic testing method for the non-metallic
inclusions in steel ( Amendment 1)
3
116 JIS G 0803:2015 Radiographic examination with film for the weld
seam of welded steel tubes
22
117 JIS G 3547:2015 Zinc-coated low carbon steel wires 15
XÂY DỰNG - VẬT LIỆU XÂY DỰNG
Trở về đầu trang
118 ISO 19026:2015 Accessible design -- Shape and colour of a flushing
button and a call button, and their arrangement with a
paper dispenser installed on the wall in public
restroom
3
119 ISO 29584:2015
Replace: ISO/TS
Glass in building -- Pendulum impact testing and
classification of safety glass
40
29584:2012
120 ASTM E3036 – 15 Standard Guide for Notating Facade Conditions in
the Field
4
121 ASTM D5982 – 15
Revises: ASTM D5982–
07
Standard Test Method for Determining Cement
Content of Fresh Soil-Cement (Heat of
Neutralization Method)
11
122 JIS A 1460:2015 Determination of the emision of formaldehyde from
building boards -- Desiccator method
14
HÓA HỌC
Trở về đầu trang
123 ISO/ASTM 52900:2015 Additive manufacturing -- General principles --
Terminology
19
124 ISO/TR 15916:2015
Replace: ISO/TR
15916:2004
Basic considerations for the safety of hydrogen
systems
62
125 ISO 14606:2015
Replace: ISO
14606:2000
Surface chemical analysis -- Sputter depth profiling -
- Optimization using layered systems as reference
materials
16
126 ASTM C903 – 15
Revises: ASTM C903–
10
Standard Practice for Preparing Refractory
Specimens by Cold Gunning
8
127 ASTM D465 – 15
Revises: ASTM D465–
05 (Reapproved 2010)
Standard Test Methods for Acid Number of Pine
Chemical Products Including Tall Oil and Other
Related Products
4
DỤNG CỤ THÍ NGHIỆM
Trở về đầu trang
128 ISO 384:2015 Replace:
ISO 384:1978
Laboratory glass and plastics ware -- Principles of
design and construction of volumetric instruments
15
129 ISO 3819:2015 Replace:
ISO 3819:1985
Laboratory glassware -- Beakers 4
130 ISO 4797:2015 Replace:
ISO 4797:2004
Laboratory glassware -- Boiling flasks with conical
ground joints
3
CHẤT DẺO
Trở về đầu trang
131 ISO 6383-1:2015
Replace: ISO 6383-
1:1983
Plastics -- Film and sheeting -- Determination of tear
resistance -- Part 1: Trouser tear method
6
132 ASTM C1303/C1303M –
15 Revises: ASTM
C1303/C1303M–14
Standard Test Method for Predicting Long-Term
Thermal Resistance of Closed-Cell Foam Insulation
22
SƠN
Trở về đầu trang
133 JIS H 7851:2015 Test method of cyclic heating for thermal-barier
coatings under temperature gradient
21
DẦU MỎ
Trở về đầu trang
134 ISO 21007-2:2015
Replace: ISO 21007-
2:2013
Gas cylinders -- Identification and marking using
radio frequency identification technology -- Part 2:
Numbering schemes for radio frequency
identification
41
135 ASTM D2318 – 15
Revises: ASTM D2318–
14ε1
Standard Test Method for Quinoline-Insoluble (QI)
Content of Tar and Pitch
4
136 ASTM D7280 – 15
Revises: ASTM D7280–
06 (Reapproved 2011)
Standard Test Method for Quinoline-Insoluble (QI)
Content of Tar and Pitch by Stainless Steel Crucible
Filtration
5
137 ASTM D4312 – 15
Revises: ASTM D4312–
95a (Reapproved 2010)
Standard Test Method for Toluene-Insoluble (TI)
Content of Tar and Pitch (Short Method)
3
NHIÊN LIỆU SINH HỌC RẮN
Trở về đầu trang
138 ISO 17828:2015 Solid biofuels -- Determination of bulk density
139 ISO 17831-1:2015 Solid biofuels -- Determination of mechanical
durability of pellets and briquettes -- Part 1: Pellets
7
140 ISO 17831-2:2015 Solid biofuels -- Determination of mechanical
durability of pellets and briquettes -- Part 2:
Briquettes
6
GỖ - SẢN PHẨM GỖ
Trở về đầu trang
141 JIS A 5905:2014 Fiberboards 54
DỆT
Trở về đầu trang
142 ISO 18168:2015 Textile floor coverings -- Colour fastness to
shampooing
5
143 ISO 16373-1:2015 Textiles -- Dyestuffs -- Part 1: General principles of
testing coloured textiles for dyestuff identification
17
144 ISO 18080-1:2015 Textiles -- Test methods for evaluating the
electrostatic propensity of fabrics -- Part 1: Test
method using corona charging
16
145 ISO 18080-2:2015 Textiles -- Test methods for evaluating the
electrostatic propensity of fabrics -- Part 2: Test
method using rotary mechanical friction
14
146 ISO 18080-3:2015 Textiles -- Test methods for evaluating the
electrostatic propensity of fabrics -- Part 3: Test
method using manual friction
16
147 ISO 18080-4:2015 Textiles -- Test methods for evaluating the
electrostatic propensity of fabrics -- Part 4: Test
method using horizontal mechanical friction
10
148 JIS L 1930:2014 Textiles-- Domestic washing and drying procedures
for textile testing
44
THUỐC LÁ
Trở về đầu trang
149 ISO 6565:2015 Replace:
ISO 6565:2011
Tobacco and tobacco products -- Draw resistance of
cigarettes and pressure drop of filter rods -- Standard
conditions and measurement
20
SỮA
Trở về đầu trang
150 ISO 19344:2015 (IDF
232)
Milk and milk products -- Starter cultures, probiotics
and fermented products -- Quantification of lactic
acid bacteria by flow cytometry
25
Y TẾ - THIẾT BỊ Y TẾ
Trở về đầu trang
151 ISO/TR 17302:2015N Anotechnologies -- Framework for identifying
vocabulary development for nanotechnology
applications in human healthcare
20
152 ISO/TS 16843-2:2015 Health informatics -- Categorial structures for
representation of acupuncture -- Part 2: Needling
9
153 ISO/TS 19844:2015 Health informatics -- Identification of medicinal
products -- Implementation guidelines for data
elements and structures for the unique identification
and exchange of regulated information on substances
260
154 ISO/TS 13582:2015
Replace: ISO/TS
13582:2013
Health informatics -- Sharing of OID registry
information
27
155 ISO 13940:2015 Health informatics -- System of concepts to support
continuity of care
152
156 ISO 11810:2015
Replace: ISO 11810-
1:2005; ISO 11810-
2:2007
Lasers and laser-related equipment -- Test method
and classification for the laser resistance of surgical
drapes and/or patient protective covers -- Primary
ignition, penetration, flame spread and secondary
21
ignition
157 ISO/TR 19498:2015 Ophthalmic optics and instruments -- Correlation of
optotypes
4
158 ISO 29661:2012/Amd
1:2015
Reference point of personal dosemeters 3
THIẾT BỊ THỂ THAO
Trở về đầu trang
159 ISO 8061:2015 Replace:
ISO 8061:2004; ISO
8061:2004/Amd 1:2006
Alpine ski-bindings -- Selection of release torque
values
5
160 ISO 11088:2015
Replace: ISO
11088:2006
Assembly, adjustment and inspection of an alpine
ski/binding/boot (S-B-B) system
13
CHẤT LƯỢNG NƯỚC
Trở về đầu trang
161 ISO 13167:2015 Water quality -- Plutonium, americium, curium and
neptunium -- Test method using alpha spectrometry
20
MÔI TRƯỜNG – AN TOÀN
Trở về đầu trang
162 ISO 14644-1:2015
Replace: ISO 14644-
1:1999
Cleanrooms and associated controlled environments -
- Part 1: Classification of air cleanliness by particle
concentration
37
163 ISO 14644-2:2015
Replace: ISO 14644-
2:2000
Cleanrooms and associated controlled environments -
- Part 2: Monitoring to provide evidence of
cleanroom performance related to air cleanliness by
particle concentration
14
164 ISO 21207:2015
Replace: ISO
21207:2004; ISO
21207:2004/Cor 1:2008
Corrosion tests in artificial atmospheres --
Accelerated corrosion tests involving alternate
exposure to corrosion-promoting gases, neutral salt-
spray and drying
9
165 ISO 13344:2015
Replace: ISO
13344:2004
Estimation of the lethal toxic potency of fire effluents 13
166 ISO/TS 29761:2015 Fire safety engineering -- Selection of design
occupant behavioural scenarios
25
167 ISO 14520-1:2015
Replace: ISO 14520-
1:2006; ISO 14520-
1:2006/Cor 1:2007;
ISO/TS 20885:2003
Gaseous fire-extinguishing systems -- Physical
properties and system design -- Part 1: General
requirements
101
168 ISO 19017:2015
Replace: ISO 14850-
1:2004
Guidance for gamma spectrometry measurement of
radioactive waste
48
169 ISO/TS 14837-32:2015 Mechanical vibration -- Ground-borne noise and
vibration arising from rail systems -- Part 32:
Measurement of dynamic properties of the ground
53
170 ISO 19449:2015 Mopeds -- Measurement methods for gaseous
exhaust emissions during inspection or maintenance
24
171 ISO 16638-1:2015 Radiological protection -- Monitoring and internal
dosimetry for specific materials -- Part 1: Inhalation
of uranium compounds
43
172 ISO 17733:2015
Replace: ISO
17733:2004
Workplace air -- Determination of mercury and
inorganic mercury compounds -- Method by cold-
vapour atomic absorption spectrometry or atomic
fluorescence spectrometry
54
173 IEC 60846-2:2015 Radiation protection instrumentation - Ambient
and/or directional dose equivalent (rate) meters
and/or monitors for beta, X and gamma radiation -
Part 2: High range beta and photon dose and dose
rate portable instruments for emergency radiation
protection purposes
34
174 JIS A 1901:2015 Determination of the emission of volatile organic
compounds and aldehydes for building products.
Small chamber method
47
THIẾT BỊ BẢO HỘ
Trở về đầu trang
175 ISO 12127-1:2015
Replace: ISO 12127-
1:2007
Clothing for protection against heat and flame --
Determination of contact heat transmission through
protective clothing or constituent materials -- Part 1:
Contact heat produced by heating cylinder
9
QUẢN LÝ – SẢN XUẤT
Trở về đầu trang
176 ISO 16355-1:2015 Application of statistical and related methods to new
technology and product development process -- Part
1: General principles and perspectives of Quality
Function Deployment (QFD)
73
177 IEC 62264-4:2015 Enterprise-control system integration - Part 4:
Objects models attributes for manufacturing
operations management integration
191
178 JIS Q 1001:2015/AMD 1 Conformity assessment - Conformity assessment for
Japanese Industrial Standards - General guidance on
a third-party certification system for products (
Amendment 1)
3
Thư viện Trường Đại học Công Nghiệp TP.HCM phối hợp với Trung tâm thông tin khoa
học và công nghệ TP.HCM cung cấp thông tin toàn văn dành cho người sử dụng thư viện trong
trường (SV, GV, HVCH, CBVC...) có nhu cầu học tập, nghiên cứu, tham khảo. Để gửi và nhận thông
tin, xin vui lòng liên hệ:
1. Thư viện Đại học Công Nghiệp TP.HCM: Gửi thông tin yêu cầu bằng 1 trong các phương tiện
sau:
+ Cổng thông tin Thư viện: http://lib.iuh.edu.vn tại mục "Yêu cầu tin";
+ Facebook: http://facebook.com/libiuh - Gửi qua "Tin nhắn" trên Page;
+ Liên hệ Phòng Nghiệp vụ: Phan Minh Trí – 0919.8989.33 - ĐT: (08) 38940390 (130) - Email:
2. Phòng đảm bảo thông tin của trung tâm thông tin khoa học và công nghệ TP.HCM
Địa chỉ: 79 Trương Định - Q1 - TP.HCM
ĐT: (08)38243826: (08)38297040 Ext: 202-203-216) Fax: 38291957
Website: www.cesti.gov.vn Email: [email protected]
Lưu ý
1/ Khi đến gửi yêu cầu thông tin, bạn nhớ mang theo thẻ sinh viên, thẻ giảng viên của trường.
2/ Thông tin được cung cấp miễn phi, ngoại trừ chi phí: in ấn tài liệu, mua tài liệu (nếu có)
Thư viện Trường Đại học Công nghiệp Thành phố H Chí Minh.