1 PRESSURE RANGE UP TO 750 BAR 4
1.1 GUNS 4 1.1.1 HP 750 S-V 4 1.1.2 HP 750-R 6
1.2 TURNABLE HOSE CONNECTION 9 1.2.1 DSA 750 / DSA 750 R 9
1.3 HOSE LINES 10 1.3.1 UP TO 750 BAR 10
2 PRESSURE RANGE UP TO 1500 BAR 14
2.1 GUNS 14 2.1.1 HP 1500-E-24V 14 2.1.2 HP 1500-E-EXI 16 2.1.3 HP 1500 S-V 18 2.1.4 HP 1500 S-V-E-24V 20 2.1.5 HP 1500 S-V-E-24V-Z 22 2.1.6 HP 1500 S-V-E-EXI 24 2.1.7 HP 1500 S-V-E-EXI- Z 26 2.1.8 HP 1500 S-VDG-ERGO 28 2.1.9 HP 1500 S-V-RC 30 2.1.10 HP 1500 RL-E-24V 32 2.1.11 HP 1500 RL-E-EXI 34 2.1.12 HP 1500 RL-RC 36 2.1.13 UWP 1500 38
2.2 TURNABLE HOSE CONNECTION 40 2.2.1 DSA 1500 40
2.3 HOSE LINES 41 2.3.1 UP TO 1250 BAR 41 2.3.2 UP TO 1500 BAR 49
3 PRESSURE RANGE UP TO 3000 BAR 53
3.1 GUNS 53 3.1.1 HP 3000 S-E-24V 53 3.1.2 HP 3000 S-E-24V-Z 55 3.1.3 HP 3000 S-E-EXI 57 3.1.4 HP 3000 S-E-EXI-Z 59 3.1.5 P 3000 S-VDG-ERGO 61 3.1.6 HP 3000 S-RC 63 3.1.7 HP 3000 RL-E-24V 65 3.1.8 HP 3000 RL-E-EXI 67 3.1.9 HP 3000 RL-RC 69 3.1.10 UWP 3000 71
3.2 TURNABLE HOSE CONNECTION 73 3.2.1 DSA 3000 73
3.3 HOSE LINES 74 3.3.1 UP TO 3010 BAR 74
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
4 WATER TOOLS 79
4.1 ORBIMASTER 79 4.1.1 ORBIMASTER 500 79 4.1.2 ORBIMASTER 800 82 4.1.3 ORBIMASTER 1500 86 4.1.4 ORBIMASTER 2500 90
4.2 TURBO NOZZLE 93 4.2.1 TURBO NOZZLE 93
4.1 ABRASIVE BLASTER 102 4.1.1 ABRASIVE BLASTER 1000-9/16 102
4.2 SPEEDY 105 4.2.1 SPEEDY 3000 105 4.2.2 NOZZLE CARRIER HEADS 107
5 NOZZLES 108
5.1 NOZZLE INSERT 108 5.1.1 UP TO 1500 BAR 108 5.1.2 UP TO 3000 BAR 119
6 ELECTRIC ACCESSORIES 134
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 4
M22x1,5
9/1
6-1
8U
NF
LH
1 PRESSURE RANGE UP TO 750 BAR 1.1 GUNS
1.1.1 HP 750 S-V Description: The HP 750S-V is a positive shutoff type high pressure jetting gun which incorporates an internal on/off valve designed for a max. operating pressure of 750 bar. The nozzle pipes from the gun series HP1500 can be mounted directly. Water tools, such as Turbo nozzle, Orbimaster etc. can be connected without intermediate adapter. Safety guard and rotary lock as well as light metal hand grip and forged steel pressure housing as standard equipment.
Advantages:
High safety standard.
Safety guard and reliable safety lock.
Optimized sealing system.
Technical data:
Material-No.: Operating pressure: Medium temperature: Recoil force perm. without body support: Recoil force perm. with body support: Weight: Length: Height: Width:
9.914-078.0
max.750 bar
max.+50°C
max.150 N
max.250 N
approx. 2,9 kg
approx. 332 mm
approx. 175 mm
approx. 41 mm
M1
2
Trigger Safety guard
Pressure housing with on off valve
Hand grip
Safety lock
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 5
A
HP 750 S-V – Components
Nozzle connection
Material No. Material No.
9.873-090.0 9.873-090.0
9.872-008.0 9.872-008.0
9.878-291.0 9.878-291.0
Nozzle pipe Weight
Material No. L (mm) kg
9.914-696.0 600 0,51
9.891-183.0 750 0,64
9.891-184.0 1000 0,85
9.891-207.0 1500 1,30
9.891-185.0 2000 1,69
9.891-186.0 3000 2,53
9.891-187.0 4000 3,37
9.891-188.0 5000 4,21
9.891-189.0 6000 5,05
9.891-383.0 7000 5,89
Accessories hose connection
Material No. A
9.871-967.0 M22x1,5 24˚ DK
9.871-969.0 M24x1,5 24˚ DK
9.871-970.0 G1/2 A
9.871-971.0 G3/4 A
9.873-047.0 M22x1,5 WGA
Nozzle connection for nozzle form 4 for coherent jet forming Mat.-No. 9.872-183.0
Turbonozzle
Orbimaster
Gun housing cpl. HP 750S-V with hose connection A M22x1,5 60° DK Mat.-No.: 9.914-078.0 Weight: approx. 2,9 kg
Body support Mat.-No.: 6.025-301.0 Weight: approx. 0,73 kg
Hose connection A M22x1,5 60° DK
Turnable hose connection DSA 750 M22x1,5 60° DK Mat.-No.: 9.872-513.0 Weight: approx. 0,6 kg
L
Hand grip Mat.-No.: 6.025-300.0
Hand grip Mat.-No.: 9.871-675.0
9/16“–18UNF LH
9/16“–18UNF LH
14,3
Handgriff
Mat.-Nr.: 6.025-300.0
Handgriff
Mat.-Nr.: 6.025-300.0
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 6
1.1.2 HP 750-R Description: The HP 750-R is a heavy duty high pressure gun designed for a max. operating pressure of 750 bar. The high pressure gun can be used in a variety of jetting applications, which require heavy duty lances to perform the cleaning task. Standard equipment includes: Safety guard, rotary trigger lock, hose connection, nozzle pipe and nozzle cap nut, as well as stainless steel pressure housing and light metal hand grip
Advantages: High safety standard. Safety guard and reliable safety lock. Quick change nozzle system. Cement rotary kiln lances available in lengths up to 15 m.
Technical data: Material-No.: Operating pressure: Medium temperature: Recoil force perm. without body support: Recoil force perm. with body support: Weight: Overall length: Overall height: Overall width: Length of nozzle pipe: Hose connection: Recommended nozzle:
9.871-312.0
max. 750 bar
max. +50°C
max. 150 N
max. 250 N
approx. 6,2 kg
approx. 860 mm
approx. 175 mm
approx. 60 mm
500 mm
M22x1,5 – 60° DK
form 4 and 19
Union nut and O-ring
Nozzle pipe
Pressure housing Hose connection
Safety guard
Trigger
Hand grip
Safety lock
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 7
A
A
A
HP 750-R – Components
Nozzle pipe Weight
Material No. L (mm) kg
9.871-398.0 500 1,3
9.871-400.0 1000 2,6
9.871-780.0 1250 3,2
9.871-401.0 1500 3,8
9.871-402.0 2000 5,0
9.871-561.0 2500 6,2
9.871-403.0 3000 7,5
9.871-562.0 3500 8,7
9.871-936.0 3700 9,4
9.871-405.0 4000 10,0
9.871-673.0 4500 11,2
9.871-406.0 5000 12,5
9.871-941.0 5500 13,7
9.871-407.0 6000 15,0
Accessories hose connection
Material No. A
9.878-063.0 M24x1,5 24˚ DK
9.877-779.0 G1/2 60˚ DK
Body support Material-No.: 6.025-301.0 Weight: approx. 0,73 kg
Gun housing cpl. HP 750-R Material-No.: 9.871-316.0 Weight: approx. 4,9 kg
Hose connection M22x1,5 60° DK
25
G 3/8 A
L
Union nut Material-No.: 9.877-691.0
O-Ring Material-No.: 6.025-168.0
Hand grip Material-No.: 9.871-677.0 Weight: approx. 0,2kg
Nozzle form 4 or 19
Turnable hose connection DSA 750 M22x1,5 60° DK Material-No.: 9.872-513.0 Weight: approx. 0,6kg
A
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 8
HP 750-R – Lances for cement furnace cleaning
max. operating pressure 600 bar
Required components for cement kiln lances 2-15 meters Select nozzle form 4 according to product sheet D-004
Lenght Material-No.
2m 9.871-489.0
3m 9.871-490.0
4m 9.871-491.0
5m 9.871-446.0
L m
Lance with connection
Tube 5 m 9.875-288.0
Quantity
Tube 3 m 9.875-289.0
Quantity
Tube 2 m 9.875-287.0
Quantity
Left/right sleeve 9.877-821.0
Quantity
Nozzle holder 9.871-847.0
Quantity
O-Ring 6.025-168.0
Quantity
Union nut 9.877-691.0
Quantity
2 9.871-489.0 - 2m 1 1 1
3 9.871-490.0 - 3m 1 1 1
4 9.871-491.0 - 4m 1 1 1
5 9.871-446.0 - 5m 1 1 1
6 9.871-491.0 - 4m 1 1 1 1 1
7 9.871-446.0 - 5m 1 1 1 1 1
8 9.871-446.0 - 5m 1 1 1 1 1
9 9.871-491.0 - 4m 1 1 1 1 1
10 9.871-446.0 - 5m 1 1 1 1 1
11 9.871-446.0 - 5m 2 2 1 1 1
12 9.871-446.0 - 5m 1 1 2 1 1 1
13 9.871-446.0 - 5m 1 1 2 1 1 1
14 9.871-446.0 - 5m 1 2 3 1 1 1
15 9.871-446.0 - 5m 1 1 1 3 1 1 1
Union nut Material-No.: 9.877-691.0
Tube 2 m Material-No.: 9.875-287.0
Tube 5 m Material-No.: 9.875-288.0
Tube 3 m Material-No.: 9.875-289.0
Lance with connection for HP 750-R
L
Nozzle holder for nozzle form 4 Material-No.: 9.871-847.0
Left/right sleeve M30X1,5 Material-No.: 9.877-821.0
O-ring Material-No.: 6.025-168.0
Nozzle form 4
Lance 30° 600mm 600bar IM30X1,5 - G 3/8DA Material-No.: 9.871-876.0
Lance 60° 600mm 600bar IM30X1,5 - G 3/8DA Material-No.: 9.871-877.0
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 9
1.2 TURNABLE HOSE CONNECTION
1.2.1 DSA 750 / DSA 750 R
Description: The turnable hose connection is a high performance rotary lead through which can be connected directly to WOMA guns type HP 750 and HP 750 R. The turnable hose connection prevents loops from forming at the high pressure hose during operating, which makes operation safer and more comfortable.
Advantages: No loop formation at the high pressure hose. All parts subject to pressure are made of high-tensile stainless steel. All functional parts are protected from dirt and water invasion.
Technical data: DSA 750 Hose connection M22x1,5 60°DK Material-No.: 9.872-524.0 DSA 750 R Hose connection M22x1,5 60°DK Material-No.: 9.872-513.0 Operating pressure: max. 750 bar Flow rate 65 l/min Medium temperature: max. + 100°C Weight: appr. 0,60kg
M2
2x1,5
DS
A 7
50
M2
5x1,5
DS
A 7
50 R
Pistolenanschluss
Gun connection
Schlauchanschluss
Hose connection
3
9 m
m
M2
2x1,5
60°D
K
130 mm DSA 750
123 mm DSA750R
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 10
1.3 HOSE LINES 1.1.3 Up to 750 bar
1.3.1.1 DN 10 – HST2G – H For hot water application up to 150° C Betriebsdruck:
Operating pressure:
Prüfdruck:
Test pressure:
Temperaturbereich:
Operating temperature range:
Verwendung für:
To use for:
max.600 bar
max.8700 psi
900 bar
13050 psi
-10° C bis +150° C
-10° C to +150° C
Ecotherm 600
Ecotherm 600
Aufbau :
Schlauchseele aus hochtemperaturbeständigem synthetischem Gummi Druckträger aus zwei Drahtgeflechten Oberdecke aus synthetischem Gummi Construction :
High temperature resistent synthetic rubber tube 2-wire braid reinforcement Cover of synthetic rubber
Schlauchleitungen Hose tubes
Schlauchmeterware Hose per metre
Material-Nr.
Materia-No.
Nennlänge
Nominal length
L = m
Gewicht
Weight
kg
Einbindung mit Armaturen
Equipped with
fittings
Werkstoff/Material
Materia-Nr.
Materia-No.
Innen-Ø
Inner-Ø Ø i
mm
Außen-Ø
Outer-Ø Ø a
mm
Biegeradius
Bendradius
R = mm
Gewicht
Weight
kg/m
max. Lieferlänge
max. delivery
length
m
9.887-931.0 20 8,0 nichtrostender
Stahl 9.887-748.0 9,5 17,1 70 0,38 100
9.887-932.0 30 11,8 Stainless Steel
Gewinde M nach DIN 13 / ISO 261; thread M as per DIN 13 / ISO 261
Schlauchverbinder / Hose connector : MN / MN 9.877-911.0
O-Ring : MN / MN 6.025-313.0
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 11
1.3.1.2 DN 10 – HST2G - H For hot water application up to 150° C
Betriebsdruck
Operating pressure
Prüfdruck
Test pressure
Temperaturbereich
Operating temperature range
Verwendung für
To use for
max.600 bar
max. 8700 psi
900 bar
13050 psi
-10° C bis +150° C
-10° C to +150° C
Ecotherm /Ecocold
Ecotherm /Ecocold
Aufbau :
Schlauchseele aus hochtemperaturbeständigem synthetischem Gummi Druckträger aus zwei Drahtgeflechten Oberdecke aus synthetischem Gummi Construction :
High temperature resistent synthetic rubber tube 2-wire braid reinforcement Cover of synthetic rubber
Schlauchleitungen Hose tubes
Schlauchmeterware Hose per metre
Material-Nr.
Material -No.
Nennlänge
Nominal length
L = m
Gewicht
Weight
kg
Einbindung mit Armaturen
Equipped with fittings
Werkstoff/Material
Material-Nr.
Material –No.
Innen-Ø
Inner-Ø Ø i
mm
Außen-Ø
Outer-Ø Ø a
mm
Biegeradius
Bendradius
R = mm
Gewicht
Weight
kg/m
max. Lieferlänge
max. delivery length
m
9.909-844.0 2 1,2
9.909-845.0 5 2,3 M22x1,5 WGA
9.909-846.0 10 4,2
9.887-745.0 20 8,0 nichtrostender 9.887-748.0 9,5 17,1 70 0,38 100
9.887-746.0 30 11,8 Stahl
9.909-847.0 50 19,4 Stainless Steel
Gewinde M nach DIN 13 / ISO 261; thread M as per DIN 13 / ISO 261 WGA = Spezialanschluss für Handanzug / special hand tight connection
Schlauchverbinder / Hose connector : MN / MN 9.878-315.0
O-Ring : MN / MN 9.881-843.0
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 12
1.3.1.3 DN 12 - HST4G - LR2 Betriebsüberdruck: max. 750 bar Aufbau :
Schlauchseele aus synthetischem Gummi Operating pressure: max. 10880 psi Druckträger aus vier Draht-Spirallagen
Oberdecke aus synthetischem Gummi Prüfdruck: 1125 bar Temperaturbereich : - 10C bis + 70C
Test pressure: 16320 psi Construction :
Synthetic rubber inner tube Verwendung für: alle WOMA - Produkte 4 - spiralwire reinforcement
Synthetic rubber cover To use for: all WOMA - Products Operating temperature range : - 10C to + 70C
Schlauchleitungen Hose tubes
Schlauchmeterware Hose per metre
Material-Nr.
Material-No.
Nennlänge
Nominal length
L = m
Gewicht
Weight
kg
Einbindung mit Armaturen
Equipped with fittings
Werkstoff/Material
Material-Nr.
Material-No.
Innen-
Inner-
i
mm
Außen-
Outer-
a
mm
Biegeradius
Bendradius
R = mm
Gewicht
Weight
kg/m
max. Lieferlänge
max. delivery length
m
9.887-481.0 Stahl / Steel
1 1,3
NIRO / SS
9.887-482.0 Stahl / Steel
10 10 9.887-485.0 12,7 24,7 230 0,93 40 *
9.909-777.0 NIRO / SS
9.887-483.0 Stahl / Steel
20 19
9.887-489.0 NIRO / SS
9.887-484.0 Stahl / Steel
40 37,5
9.909-778.0 NIRO / SS
Gewinde M nach DIN 13 / ISO 261; thread M as per DIN 13 / ISO 261 NIRO = nichtrostender Stahl , SS = Stainless Steel
* Lieferlänge über 40m bis max. 100m auf Anfrage * Delivery length above 40m up to 100m on request
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 13
Hose fittings DN 12 - HST4G - LR2 With tear protection
Betriebsüberdruck : max. 750 bar
Operating pressure: max. 10880 psi
Überwurfarmatur Swivel fitting
Schlauchverbinder Hose connector
Material-Nr.
Material -No.
Werkstoff
Material
L 1
mm
SW 1
Width across flats
mm
Material -Nr.
Material -No.
Werkstoff
Material
L 2
mm
L 3
mm
SW 2
Width across flats
mm
9.887-486.0
9.887-487.0
Stahl / Steel
NIRO / SS
80
30
9.877-698.0
NIRO / SS
58
17
27
45 Rohrkrümmer
45 Elbow
90 Rohrkrümmer
90 Elbow
Teile-Nr.
Part-No.
Werkstoff
Material
L 4
mm
L 5
mm
SW 3
mm
SW 4
mm
Teile-Nr.
Part-No.
Werkstoff
Material
L 6
mm
L 7
mm
SW 5
mm
SW 6
mm
9.887-503.0
9.887-505.0
Stahl / Steel
NIRO / SS
75
28
30
27
9.887-504.0
9.887-506.0
Stahl / Steel
NIRO / SS
60
55
30
27
Gewinde M nach DIN 13 / ISO 261; thread M as per DIN 13 / ISO 261 NIRO = nichtrostender Stahl , SS = Stainless Steel
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 14
9/1
6-1
8U
NF
LH
2 PRESSURE RANGE UP TO 1500 BAR 2.1 GUNS
2.1.1 HP 1500-E-24V
Description: The HP 1500-E-24V is a high pressure jetting gun without on-off valve, which incorporates a low voltage micro switch into its design.
Via the micro switch the high-pressure operation of the unit can be switched on or off. This facilitates work and increases worker safety.
Standard equipment includes; a trigger safety guard and latching trigger lock to prevent unintentional use, forged steel pressure housing and light weight polymerized hand grip. Advantages:
High safety standard.
Turnable hand grip for easy operation.
Full encapsulated polymerized hand grip offers high tensile strength and excellent resistant to most chemicals.
All functional parts are protected from dirt and water invasion.
Technical data: Material-No.: 9.871-330.0 Operating pressure: max. 1500 bar Medium temperature: max. +100°C Recoil force perm. without body support: max. 150 N Recoil force perm. with body support: max. 250 N Pressure loss: 5 bar at 30 l/min Weight: appr. 2,2 kg Length: appr. 392 mm Height: appr. 196 mm Width: appr. 72 mm
M1
2
Trigger Safety guard Safety lock
Pressure housing without on-off valve
Druckgehäuse mit mechanischem Ventil
Hand grip
M22x1,5
E-cable
Remote control unit with electric contact 24VDC Druckgehäuse mit mechanischem Ventil
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 15
B
A
HP 1500-E-24V - Components
Nozzle connection
Material No. Nozzle form
9.873-090.0 1 and 8
9.872-008.0 4 and 19
9.878-291.0 21
Nozzle pipe Weight
Material No. L (mm) kg
9.891-181.0 300 0,26
9.891-182.0 500 0,43
9.891-183.0 750 0,64
9.891-184.0 1000 0,85
9.891-207.0 1500 1,30
9.891-185.0 2000 1,69
9.891-186.0 3000 2,53
9.891-187.0 4000 3,37
9.891-188.0 5000 4,21
9.891-189.0 6000 5,05
9.891-383.0 7000 5,89
Turnable hose connection
Material No. B
9.872-624.0 M22x1,5 24˚ DK
9.872-436.0 M22x1,5 60˚ DK
9.872-437.0 M24x1,5 24˚ DK
9.872-438.0 G1/2 60˚ DK
Hose connection
Material No. A
9.871-967.0 M22x1,5 24˚ DK
9.871-968.0 M22x1,5 60˚ DK
9.871-969.0 M24x1,5 24˚ DK
9.871-970.0 G1/2 A 60˚ DK
9.871-971.0 G3/4 A 60˚ DK
L
Nozzle connection for nozzle form 4 for coherent jet forming Mat.-No.: 9.872-183.0
Turbo Nozzle
Orbimaster
Gun housing cpl. HP 1500-E-24V Mat.-No.: 9.871-330.0 Weight: appr. 2,2 kg
Handgrip Mat.-No.: 6.025-300.0
Handgrip Mat.-No.: 9.871-675.0
Body support Mat.-No.: 6.025-301.0 Weight: appr. 0,73 kg
9/16“–18UNF LH
9/16“–18UNF LH
14,3
E-cable 300 mm long Electric connection E-24V
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 16
9/1
6-1
8U
NF
LH
2.1.2 HP 1500-E-EXI
Description:
The HP 1500-E-EXI is a high pressure jetting gun without on-off valve, which incorporates a low voltage micro switch into its design.
Via the micro switch the high-pressure operation of the unit can be switched on or off. This facilitates work and increases worker safety.
Standard equipment includes; a trigger safety guard and latching trigger lock to prevent unintentional use, forged steel pressure housing and light weight polymerized hand grip.
Advantages:
High safety standard.
Turnable hand grip for easy operation.
Full encapsulated polymerized hand grip offers high tensile strength and excellent resistant to most chemicals.
All functional parts are protected from dirt and water invasion.
Technical data: Material-No.: 9.871-329.0 Operating pressure: max. 1500 bar Medium temperature: max. +100°C Recoil force perm. without body support: max. 150 N Recoil force perm. with body support: max. 250 N Pressure loss: 5 bar at 30 l/min Weight: appr. 2,2 kg Length: appr. 392 mm Height: appr. 196 mm Width: appr. 72 mm
M1
2
Trigger Safety guard Safety lock
Pressure housing without on-off valve
Druckgehäuse mit mechanischem Ventil
Hand grip
M22x1,5
E-cable
Remote control unit with electric contact EEx-i Druckgehäuse mit mechanischem Ventil
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 17
B
A
HP 1500-E-EXI – Components
Nozzle connection
Material No. Nozzle form
9.873-090.0 1 and 8
9.872-008.0 4 and 19
9.878-291.0 21
Nozzle pipe Weight
Material No. L (mm) kg
9.891-181.0 300 0,26
9.891-182.0 500 0,43
9.891-183.0 750 0,64
9.891-184.0 1000 0,85
9.891-207.0 1500 1,30
9.891-185.0 2000 1,69
9.891-186.0 3000 2,53
9.891-187.0 4000 3,37
9.891-188.0 5000 4,21
9.891-189.0 6000 5,05
9.891-383.0 7000 5,89
Turnable hose connection
Material No. B
9.872-624.0 M22x1,5 24˚ DK
9.872-436.0 M22x1,5 60˚ DK
9.872-437.0 M24x1,5 24˚ DK
9.872-438.0 G1/2 60˚ DK
Hose connection
Material No. A
9.871-967.0 M22x1,5 24˚ DK
9.871-968.0 M22x1,5 60˚ DK
9.871-969.0 M24x1,5 24˚ DK
9.871-970.0 G1/2 A 60˚ DK
9.871-971.0 G3/4 A 60˚ DK
L
Nozzle connection for nozzle form 4 for coherent jet forming Mat.-No: 9.872-183.0
Turbo nozzle
Orbimaster
Gun housing cpl. HP 1500-E-EXI
Mat.-No.: 9.871-329.0 Weight: appr. 3,0 kg
Handgrip Mat.-No.: 6.025-300.0
Handgrip Mat.-No.: 9.871-675.0
Body support Mat.-No.: 6.025-301.0 Weight: appr. 0,73 kg
9/16“–18UNF LH
9/16“–18UNF LH
14,3
E-cable 300 mm long Electric connection E-EXI
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 18
M22x1,5
9/1
6-1
8U
NF
LH
2.1.3 HP 1500 S-V
Description: The HP 1500S-V is a positive shutoff type high pressure jetting gun which incorporates an internal on/off valve designed for a max. operating pressure of 1500 bar. The HP 1500S-V features a light weight ergonomically designed polymerized hand grip. Standard equipment includes; a trigger safety guard and latching trigger lock to prevent unintentional use, forged steel pressure housing and light weight polymerized hand grip. Advantages: High safety standard. Turnable hand grip for easy operation. Full encapsulated polymerized hand grip offers high tensile strength and excellent resistant to most chemicals. All functional parts are protected from dirt and water invasion.
Technical data: Material-No.: 9.871-168.0 Operating pressure: max. 1500 bar Medium temperature: max.+100°C Recoil force perm. without body support: max. 150 N Recoil force perm. with body support: max. 250 N Pressure loss: 5 bar at 30 l/min Weight: appr. 2,7 kg Length: appr. 344 mm Height: appr. 196 mm Width: appr. 48 mm
M1
2
Trigger Safety guard Safety lock
Pressure housing with on-off valve
Druckgehäuse mit mechanischem Ventil
Hand grip
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 19
B
A
HP 1500S-V – Components
Nozzle connection
Material No. Nozzle form
9.873-090.0 1 and 8
9.872-008.0 4 and 19
9.878-291.0 21
Nozzle pipe Weight
Material No. L (mm) kg
9.891-181.0 300 0,26
9.891-182.0 500 0,43
9.891-183.0 750 0,64
9.891-184.0 1000 0,85
9.891-207.0 1500 1,30
9.891-185.0 2000 1,69
9.891-186.0 3000 2,53
9.891-187.0 4000 3,37
9.891-188.0 5000 4,21
9.891-189.0 6000 5,05
9.891-383.0 7000 5,89
Turnable hose connection
Material No. B
9.872-624.0 M22x1,5 24˚ DK
9.872-436.0 M22x1,5 60˚ DK
9.872-437.0 M24x1,5 24˚ DK
9.872-438.0 G1/2 60˚ DK
Hose connection
Material No. A
9.871-967.0 M22x1,5 24˚ DK
9.871-968.0 M22x1,5 60˚ DK
9.871-969.0 M24x1,5 24˚ DK
9.871-970.0 G1/2 A 60˚ DK
9.871-971.0 G3/4 A 60˚ DK
L
Nozzle connection for nozzle form 4 for coherent jet forming Mat.-No. 9.872-183.0
Turbo nozzle
Orbimaster
Gun housing cpl. . HP 1500S-V Mat.-No.: 9.871-168.0 Weight: appr. 2,7 kg
Hand grip Mat.-No.: 6.025-300.0
Hand grip Mat.-No.: 9.871-675.0
Body support Mat.-No: 6.025-301.0 Weight: appr.. 0,73 kg
9/16“–18UNF LH
9/16“–18UNF LH
14,3
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 20
9/1
6-1
8U
NF
LH
2.1.4 HP 1500 S-V-E-24V
Description: The HP 1500S-V-E-24V is a positive shutoff type high pressure jetting gun which incorporates an internal on/off valve and low voltage micro switch into its design. Via the micro switch the high-pressure operation of the unit can be switched on or off. This facilitates work and increases worker safety.
Standard equipment includes: A trigger safety guard and latching trigger lock to prevent unintentional use, forged steel pressure housing and light weight polymerized hand grip. Advantages:
High safety standard
Turnable hand grip for easy operation
Full encapsulated polymerized hand grip offers high tensile strength and excellent resistant to most chemicals.
All functional parts are protected from dirt and water invasion.
Technical data: Material-No.: 9.871-328.0 Operating pressure: max. 1500 bar Medium temperature: max. +100°C Recoil force perm. without body support: max. 150 N Recoil force perm. with body support: max. 250 N Pressure loss: 5 bar at 30 l/min Weight: appr. 3,0 kg Length: appr. 460 mm Height: appr. 196 mm Width: appr. 72 mm
M1
2
Trigger Safety guard Safety lock
Pressure housing with on-off valve
Druckgehäuse mit mechanischem Ventil
Hand grip
M22x1,5
E-cable
Remote control unit with electric contact 24V DC Druckgehäuse mit mechanischem Ventil
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 21
B
A
HP 1500S-V-E-24V – Components
Nozzle connection
Material No. Nozzle form
9.873-090.0 1 and 8
9.872-008.0 4 and 19
9.878-291.0 21
Nozzle pipe Weight
Material No. L (mm) kg
9.891-181.0 300 0,26
9.891-182.0 500 0,43
9.891-183.0 750 0,64
9.891-184.0 1000 0,85
9.891-207.0 1500 1,30
9.891-185.0 2000 1,69
9.891-186.0 3000 2,53
9.891-187.0 4000 3,37
9.891-188.0 5000 4,21
9.891-189.0 6000 5,05
9.891-383.0 7000 5,89
Turnable hose connection
Material No. B
9.872-624.0 M22x1,5 24˚ DK
9.872-436.0 M22x1,5 60˚ DK
9.872-437.0 M24x1,5 24˚ DK
9.872-438.0 G1/2 60˚ DK
Hose connectionr
Material No. A
9.871-967.0 M22x1,5 24˚ DK
9.871-968.0 M22x1,5 60˚ DK
9.871-969.0 M24x1,5 24˚ DK
9.871-970.0 G1/2 A 60˚ DK
9.871-971.0 G3/4 A 60˚ DK
L
Nozzle connection for nozzle form 4 for coherent jet forming Mat.-No.: 9.872-183.0
Turbo nozzle
Orbimaster
Gun housing cpl. HP 1500S-V-24V Mat.-No.: 9.871-328.0 Weight: appr. 3,0 kg
Handgrip Mat.-No.: 6.025-300.0
Handgrip Mat.-No.: 9.871-675.0
Body support Mat.-No.: 6.025-301.0 Weight: appr. 0,73 kg
9/16“–18UNF LH
9/16“–18UNF LH
14,3
E-cable 300 mm long Electric connection 24V DC
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 22
2.1.5 HP 1500 S-V-E-24V-Z
Description: The HP 1500S-V - E-24V-Z is a positive shutoff type high pressure jetting gun with two hand operation, which incorporates an internal on/off valve and low voltage micro switch into its design. The second operational control increases safety standard. Via the electric contacts, the high pressure operation of the unit can be switched on or off. This facilitates work and increases worker safety. Standard equipment includes; a trigger safety guard and latching trigger lock to prevent unintentional use, forged steel pressure housing and light weight polymerized hand grip.
Special Advantages: High safety standard.
Two hand operation.
Turnable hand grip for easy opeartion.
Fully encapsulated polymerized hand grip offers high tensile strength and excellent resistant to most chemicals.
All functional parts are protected from dirt and water invasion.
Technical Data:
Part-No.: 9.871-240.0
Operating pressure: max. 1500 bar
Medium temperature: max. 100 °C
Recoil force perm. without body support:
max. 150 N
Recoil force perm. with body support:
max. 250 N
Weight:
appr. 3 kg
Length ( second operational control incl.):
ü. a. 700 mm
Height: ü. a. 200 mm
Width: ü. a 50 mm
Trigger Safety guard Safety lock
Remote control unit with electric contact 24V DC
Cable
Hand grip
M22 x 1,5 Second operational control
Pressure housing with on-off valve
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 23
HP 1500S-V – E – 24V – Z - Components
Nozzle connection
Part-No. for nozzle
form
9.871-892.0 1 and 8
9.872-008.0 4 and 19
9.878-291.0 21
Nozzle pipe Weight
Mat.-No. L (mm) kg
9.891-181.0 300 0,26
9.891-182.0 500 0,43
9.891-183.0 750 0,64
9.891-184.0 1000 0,85
9.891-207.0 1500 1,30
9.891-185.0 2000 1,69
9.891-186.0 3000 2,53
9.891-187.0 4000 3,37
9.891-188.0 5000 4,21
9.891-189.0 6000 5,05
9.891-383.0 7000 5,89
Turnable hose connection
Part-No. B
9.872-624.0 M22x1,5 24°DK
9.872-436.0 M22x1,5 60°DK
9.872-437.0 M24x1,5 24°DK
9.872-438.0 G ½ 60° DK
Hose connection
Part-No. A
9.871-967.0 M22x1,5 24°DK
9.871-968.0 M22x1,5 60°DK
9.871-969.0 M24x1,5 24°DK
9.871-970.0 G ½ 60° DK
9.871-971.0 G ¾ 60° DK
Nozzle connection for nozzle Form 4 for coherent jet forming Part-No.: 9.872-183.0
Orbimaster Turbo nozzle
Gun housing cpl. HP 1500S-V – E – 24V - Z Part-No.: 9.871-240.0 Weight appr.: 3,0 kg
Body support Part-No.: 6.025-301.0 Weight appr.: 0,73kg
Nozzle pipe
9/16“ – 18UNF LH
9/16“ – 18UNF LH
14,3
L
B
A
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 24
9/1
6-1
8U
NF
LH
2.1.6 HP 1500 S-V-E-EXI
Description: The HP 1500S-V-E-EXI is a positive shutoff type high pressure jetting gun which incorporates an internal on/off valve and low voltage micro switch into its design. Via the micro switch the high-pressure operation of the unit can be switched on or off. This facilitates work and increases worker safety.
Standard equipment includes: A trigger safety guard and latching trigger lock to prevent unintentional use, forged steel pressure housing and light weight polymerized hand grip. Advantages:
High safety standard
Turnable hand grip for easy operation
Full encapsulated polymerized hand grip offers high tensile strength and excellent resistant to most chemicals.
All functional parts are protected from dirt and water invasion.
Technical data: Material-Nr.: 9.871-326.0 Operating pressure: max.1500 bar Medium temperature: max.+100°C Recoil force perm. without body support: max. 150 N Recoil force perm. with body support: max. 250 N Pressure loss: 5 bar at 30 l/min Weight: appr. 3,0 kg Length: appr. 460 mm Height: appr. 196 mm Width: appr. 72 mm
M1
2
Trigger Safety guard Safety lock
Pressure housing with on-off valve
Druckgehäuse mit mechanischem Ventil
Hand grip
M22x1,5
E-cable
Remote control unit with electric contact E-EXI Druckgehäuse mit mechanischem Ventil
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 25
B
A
HP 1500S-V-E-EXI – Components
Nozzle connection
Material No. Nozzle form
9.873-090.0 1 and 8
9.872-008.0 4 and 19
9.878-291.0 21
Nozzle pipe Weight
Material No. L (mm) kg
9.891-181.0 300 0,26
9.891-182.0 500 0,43
9.891-183.0 750 0,64
9.891-184.0 1000 0,85
9.891-207.0 1500 1,30
9.891-185.0 2000 1,69
9.891-186.0 3000 2,53
9.891-187.0 4000 3,37
9.891-188.0 5000 4,21
9.891-189.0 6000 5,05
9.891-383.0 7000 5,89
Turnable hose connection
Material No. B
9.872-624.0 M22x1,5 24˚ DK
9.872-436.0 M22x1,5 60˚ DK
9.872-437.0 M24x1,5 24˚ DK
9.872-438.0 G1/2 60˚ DK
Hose connection
Material No. A
9.871-967.0 M22x1,5 24˚ DK
9.871-968.0 M22x1,5 60˚ DK
9.871-969.0 M24x1,5 24˚ DK
9.871-970.0 G1/2 A 60˚ DK
9.871-971.0 G3/4 A 60˚ DK
L
Nozzle connection for nozzle form 4 for coherent jet forming Mat.-No.: 9.872-183.0
Turbo nozzle
Orbimaster
Gun housing cpl. HP 1500S-V- E-EXI Mat.-No.: 9.871-326.0 Weight: appr. 3,0 kg
Handgrip Mat.-No.: 6.025-300.0
Handgrip Mat.-No.: 9.871-675.0
Body support Mat.-No.: 6.025-301.0 Weight: appr. 0,73 kg
9/16“–18UNF LH
9/16“–18UNF LH
14,3
E-cable 300 mm long Electric connection E-EXI
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 26
2.1.7 HP 1500 S-V-E-EXI- Z
Description: The HP 1500S-V - E-EXI-Z is a positive shutoff type high pressure jetting gun with two hand operation, which incorporates an internal on/off valve and low voltage micro switch into its design. The second operational control increases safety standard. Via the electric contacts, the high pressure operation of the unit can be switched on or off. This facilitates work and increases worker safety. Standard equipment includes; a trigger safety guard and latching trigger lock to prevent unintentional use, forged steel pressure housing and light weight polymerized hand grip.
Special Advantages: High safety standard. Two hand operation. Turnable hand grip for easy opeartion. Fully encapsulated polymerized hand grip offers high tensile strength and excellent resistant to most chemicals. All functional parts are protected from dirt and water invasion.
Technical Data: Part-No.: Operating pressure: Medium temperature: Recoil force perm. without body support: Recoil force perm. with body support: Weight: Length (second operational control incl.): Height: Width:
001.1694
max. 1500 bar
max. 100 °C
max. 150 N
max. 250 N
approx. 3 kg
ü. a. 700 mm
ü. a. 200 mm
ü. a. 50 mm
Trigger
Safety guard Safety lock
Remote control unit with electric contact E-EXI
Cable
Hand grip
M22 x 1,5 Second operational control
Pressure housing with on-off valve
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 27
B
C
HP 1500S-V-E-EXI-Z - Components
14,3
Gun housing cpl. HP 1500S-V – E – EXI Part-No.: 9.871-245.0 Weight appr.: 3,0 kg
Body support Part-No.: 6.025-301.0 Weight appr.: 0,73kg
Turbodüse Nozzle connection for nozzle
Form 4 for coherent jet forming Part-No.: 9.872-183.0
A
B
Nozzle connection
Part-No. for nozzle
form
9.871-892.0 1 and 8
9.872-008.0 4 and 19
9.878-291.0 21
Nozzle pipe for nominal lenght L
Weigt
Part-No. L (mm) kg
9.891-181.0 300 0,26
9.891-182.0 500 0,43
9.891-183.0 750 0,64
9.891-184.0 1000 0,85
9.891-207.0 1500 1,30
9.891-185.0 2000 1,69
9.891-186.0 3000 2,53
9.891-187.0 4000 3,37
9.891-188.0 5000 4,21
9.891-189.0 6000 5,05
9.891-383.0 7000 5,89
Turnable hose connection
Part-No. B
9.872-624.0 M22x1,5 24°DK
9.872-436.0 M22x1,5 60°DK
9.872-437.0 M24x1,5 24°DK
9.872-438.0 G ½ 60° DK
Hose connection
Part-No. A
9.871-967.0 M22x1,5 24°DK
9.871-968.0 M22x1,5 60°DK
9.871-969.0 M24x1,5 24°DK
9.871-970.0 G ½ 60° DK
9.871-971.0 G ¾ 60° DK
Orbimaster
L
Nozzle pipe
9/16“ – 18UNF LH
9/16“ – 18UNF LH
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 28
9/1
6-1
8U
NF
LH
M22x1,5
2.1.8 HP 1500 S-VDG-Ergo
Description: The HP 1500S-VDG-Ergo is a positive shutoff type high pressure jetting gun which incorporates an internal on/off valve and a bypass for a max. operating pressure of 1500 bar. A patented power transfer mechanism prevents premature fatigue of the operator's hand and has a positive effect on the service life of the gun. In non actuating trigger position, the flow medium will lead through the bypass line and the high pressure aggregate becomes pressureless. Standard equipment includes; a trigger safety guard, latching trigger lock to prevent unintentional use, forged steel pressure housing and light weight polymerized hand grip.
Advantages:
High safety standard.
Patented power transfer mechanism.
Quick switching operation.
Turnable hand grip for easy operation.
Full encapsulated polymerized hand grip
offers high tensile strength and excellent
resistant to most chemicals.
All functional parts are protected from dirt
and water invasion.
Technical data:
Material-No.: 9.915-412.0
Operating pressure: max. 1500 bar
Medium temperature: max. 100 °C
Recoil force perm. without body support:
max. 150 N
Recoil force perm. with body support:
max. 250 N
Weight: appr. 3 kg
Length: appr. 360 mm
Height: appr. 200 mm
Width: appr. 50 mm
M1
2
Trigger Safety guard Safety lock
Pressure housing with on/off valve
Druckgehäuse mit mechanischem Ventil Druckgehäuse mit mechanischem Ventil Druckgehäuse mit mechanischem Ventil Druckgehäuse mit mechanischem Ventil Druckgehäuse mit mechanischem Ventil Druckgehäuse mit mechanischem Ventil Druckgehäuse mit mechanischem Ventil Druckgehäuse mit mechanischem Ventil Druckgehäuse mit mechanischem Ventil Druckgehäuse mit mechanischem Ventil
Hand grip
G3/4" (Bypass connection)
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 29
A
B
HP 1500S-VDG-Ergo – Components
Nozzle connection
Material No. Nozzle form
9.873-090.0 1 and 8
9.872-008.0 4 and 19
9.878-291.0 21
Nozzle pipe Weight
Material No. L (mm) kg
9.891-181.0 300 0,26
9.891-182.0 500 0,43
9.891-183.0 750 0,64
9.891-184.0 1000 0,85
9.891-207.0 1500 1,30
9.891-185.0 2000 1,69
9.891-186.0 3000 2,53
9.891-187.0 4000 3,37
9.891-188.0 5000 4,21
9.891-189.0 6000 5,05
9.891-383.0 7000 5,89
Turnable hose connection
Material No. B
9.872-624.0 M22x1,5 24˚ DK
9.872-436.0 M22x1,5 60˚ DK
9.872-437.0 M24x1,5 24˚ DK
9.872-438.0 G1/2 60˚ DK
Hose connection
Material No. A
9.871-967.0 M22x1,5 24˚ DK
9.871-968.0 M22x1,5 60˚ DK
9.871-969.0 M24x1,5 24˚ DK
9.871-970.0 G1/2 A 60˚ DK
9.871-971.0 G3/4 A 60˚ DK
L
Nozzle connection for nozzle form 4 for coherent jet forming Mat.-No.: 9.872-183.0
Turbo nozzle
Orbimaster
Gun housing HP 1500S-VDG-Ergo Mat.-No.: 9.915-412.0 Weight: appr. 3,0 kg
Hand grip Mat.-No.: 6.025-300.0
Hand grip Mat.-No.: 9.871-675.0
Body support Mat.-No.: 6.025-301.0 Weight: appr. 0,73 kg
9/16“–18UNF LH
9/16“–18UNF LH
14,3
Bypass Hose Mat.-No.: 9.887-970.0 Weight: ca. 0,6 kg Length: 1,5 m
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 30
2.1.9 HP 1500 S-V-RC
Pipe Transmitter connection 9/16-18UNF LH HP connection iM22x1,5 Changeable battery Trigger Safety lock Hand grip
Receiver „Reflektomat“ Magnetic holding device Connection to Hp unit
Description:
The HP 1500 – RC is a high-pressure jetting gun equipped with radio remote control and internal mechanical valve. The radio remote control has a safety function and was specially designed for professional and safe operation with high pressure units. Via the radio signal, the high pressure operation of the unit can be switched on or off. This facilitates work and increases worker safety. The system consists of a high-pressure gun with built-in transmitter and a receiver „Reflektomat“, which is connected to the high-pressure unit by means of a cable; also included are two batteries and a battery charger. The equipment includes a safety guard and a safety lock as well as a hand grip made of plastic and a pressure housing made of forged steel.
Radio technique: Radio system not subject to registration and non-chargeable in all EC countries and in Switzerland, other countries supplied on request. Special receiving procedure to avoid radio interferences dependent on reflection. Specially suited for operation in halls, tunnels, in city centers and densely populated areas
Advantages:
High reliability, big interference invulnerability and data security
Turnable hand grip for easy handling
Fully encapsulated polymerised hand grip in two-section design offers high tensile strength and excellent resistance to most chemicals.
All moving parts are protected from dirt and water invasion.
Technical Data:
Material-No.: 9.871-237.0
Operating pressure: max. 1500 bar
Medium temperature: max. +100 °C
Permissible recoil force without body support:
max. 150 N
Permissible recoil force with body support:
max. 250 N
Weight: approx. 3 kg
Length: approx. 430 mm
Height: approx. 200 mm
Width: approx. 80 mm
Frequency not subject to approval in 70 cm tape
Capacity of transmitter: 10 mW
Range of transmission: approx. 300 m
Supply voltage: 7,2 V changeable battery
Charger: 115/230 V AC
Receiver - degree of protection: IP 65
Potential-free relay contacts
Supply voltage: 12/24 V DC
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 31
B
A
HP 1500S-V-RC - Components
Nozzle connection
Material No. Nozzle form
9.873-090.0 1 and 8
9.872-008.0 4 and 19
9.878-291.0 21
Nozzle pipe Weight
Material No. L (mm) kg
9.891-181.0 300 0,26
9.891-182.0 500 0,43
9.891-183.0 750 0,64
9.891-184.0 1000 0,85
9.891-207.0 1500 1,30
9.891-185.0 2000 1,69
9.891-186.0 3000 2,53
9.891-187.0 4000 3,37
9.891-188.0 5000 4,21
9.891-189.0 6000 5,05
9.891-383.0 7000 5,89
Turnable hose connection
Material No. B
9.872-624.0 M22x1,5 24˚ DK
9.872-436.0 M22x1,5 60˚ DK
9.872-437.0 M24x1,5 24˚ DK
9.872-438.0 G1/2 60˚ DK
Hose connection
Material No. A
9.871-967.0 M22x1,5 24˚ DK
9.871-968.0 M22x1,5 60˚ DK
9.871-969.0 M24x1,5 24˚ DK
9.871-970.0 G1/2 A 60˚ DK
9.871-971.0 G3/4 A 60˚ DK
L
Nozzle connection for nozzle form 4 for coherent jet forming Mat.-No.: 9.872-183.0
Turbo nozzle
Orbimaster
Gun housing cpl. HP 1500S-V-RC Mat.-No.: 9.871-237.0 Weight: appr. 3,0 kg
Handgrip Mat.-No.: 6.025-300.0
Handgrip Mat.-No.: 9.871-675.0
Body support Mat.-No.: 6.025-301.0 Weight: appr. 0,73 kg
9/16“–18UNF LH
9/16“–18UNF LH
14,3
Radio Technique: Included in the extent of supply of the HP gun: - HP gun with transmitter - Receiver „Reflektomat“ with 5m cable - Two changeable batteries 7,2 V - Battery charger 115 / 230 V AC Option:
- Changeable battery 7,2 V - Mat.-No.: 9.889-694.0 - Battery charger 12 / 24 V DC - Mat.-No.: 9.889-695.0
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 32
2.1.10 HP 1500 RL-E-24V
Description:
The HP1500RL–E–24V is a high-pressure jetting gun equipped with a pneumatically driven rotary lead-through and an electric remote control, suitable for a wide range of application. The composition of HP-Gun and nozzle carrier head represents a highly efficient water tool, which guarantees – depending on the rotation of the nozzle carrier head – a high surface treatment/cleaning rate. The equipment includes a safety lock, as well as a hand grip made of plastic and a pressure housing made of forged steel.
Special characteristics:
Rotational speed adjustable by air pressure and
quantity
Low weight
Compact design with small dimensions
Optimum running qualities
Parts under pressure made of high-tensile
stainless steel
Turnable hand grip for easy handling
All moving parts are protected from dirt and
water invasion
Technical Data: Material-No.: Operating pressure: Flow rate: Medium temperature: Weight: approx. Working pressure of the air motor: Working pressure at working rpm: Air consumption: Sense of rotation: Length: Width: Height: Permissible recoil force without body support: Permissible recoil force with body support:
9.893-638.0
max. 1500 bar
max. 25 l/min
max. +50 °C
5,50 kg
6,5 bar
0,16 kW 2500 1/min
0,4 m³/min at 6,5 bar
Clockwise in jet direction
approx. 800 mm
approx. 56 mm
approx. 200 mm
max. 150 N
max. 250 N
M1
4 x
1,5
Connection for air supply KS ¼”
M22x1,5
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 33
HP 1500 RL–E–24V - Components
Nozzle carrier head Weight
Material No. Number of nozzle form 21
Typ-bar kg
9.886-774.0 2 E02-3000 0,45
9.886-775.0 3 E03-3000 0,45
9.886-772.0 3 oder 6 E05-3000 0,47
9.886-773.0 3 oder 6 E09-3000 0,85
9.886-645.0 3 oder 6 E24-3000 0,85
Turnable hose connection
Material No. B
9.872-6240 M22x1,5 24˚ DK
9.872-436.0 M22x1,5 60˚ DK
9.872-437.0 M24x1,5 24˚ DK
9.872-438.0 G1/2 60˚ DK
Hose connection
Material No. A
9.871-967.0 M22x1,5 24˚ DK
9.871-968.0 M22x1,5 60˚ DK
9.871-969.0 M24x1,5 24˚ DK
9.871-970.0 G1/2 A 60˚ DK
9.871-971.0 G3/4 A 60˚ DK
Nozzle carrier head E02 – 3000 Spraying angle: 20°
Nozzle carrier head E03 – 3000 Spraying angle: 30°
Nozzle carrier head E09 – 3000 Spraying angle: 20°, 24°
Nozzle carrier head E05 – 3000 Spraying angle: 20°, 24°
Nozzle carrier head E24 – 3000 Spraying angle: 30°
Body support Mat.-No.:6.025-301.0 Weight: 0,73 kg
Operating information: The air motor is only to be used with dry, clean and lubricated air. Only fill up with pneumatic oil WOMA Mat.-No.: 9.890-539.0 – viscosity class ISO VG 46 –. The max. permitted air pressure of 6,5 bar has not to be exceeded.
B
A
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 34
2.1.11 HP 1500 RL-E-EXI Connection for air supply KS ¼” M22x1,5
Description:
The HP1500RL–E–EXI is a high-pressure jetting gun equipped with a pneumatically driven rotary lead-through and an electric remote control, suitable for a wide range of application. The composition of HP-Gun and nozzle carrier head represents a highly efficient water tool, which guarantees – depending on the rotation of the nozzle carrier head – a high surface treatment/cleaning rate. The equipment includes a safety lock, as well as a hand grip made of plastic and a pressure housing made of forged steel.
Special characteristics:
Rotational speed adjustable by air pressure and
quantity
Low weight
Compact design with small dimensions
Optimum running qualities
Parts under pressure made of high-tensile
stainless steel
Turnable hand grip for easy handling
All moving parts are protected from dirt and
water invasion
Technical Data: Material-No.: Operating pressure: Flow rate: Medium temperature: Weight: Working pressure of the air motor: Working pressure at working rpm: Air consumption: Sense of rotation: Length: Width: Height: Permissible recoil force without body support: Permissible recoil force with body support:
9.893-639.0
max. 1500 bar
max. 25 l/min
max. +50 °C
approx. 5,50 kg
6,5 bar
0,16 kW 2500 1/min
0,4 m³/min at 6,5 bar
Clockwise in jet direction
approx. 800 mm
approx. 56 mm
approx. 200 mm
max. 150 N
max. 250 N
M1
4 x
1,5
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 35
B
A
HP 1500 RL-E-EXI - Components
Nozzle carrier head Weight
Material No. Number of nozzle form 21
Typ-bar kg
9.886-774.0 2 E02-3000 0,45
9.886-775.0 3 E03-3000 0,45
9.886-772.0 3 or 6 E05-3000 0,47
9.886-773.0 3 or 6 E09-3000 0,85
9.886-645.0 3 or 6 E24-3000 0,85
Hose connection
Material No. A
9.871-967.0 M22x1,5 24˚ DK
9.871-968.0 M22x1,5 60˚ DK
9.871-969.0 M24x1,5 24˚ DK
9.871-970.0 G1/2 A 60˚ DK
9.871-971.0 G3/4 A 60˚ DK
Turnable hose connection
Material No. B
9.872-624.0 M22x1,5 24˚ DK
9.872-436.0 M22x1,5 60˚ DK
9.872-437.0 M24x1,5 24˚ DK
9.872-438.0 G1/2 60˚ DK
Nozzle carrier head E02 – 3000 Spraying angle: 20°
Nozzle carrier head E03 – 3000 Spraying angle: 30°
Nozzle carrier head E09 – 3000 Spraying angle: 20°, 24°
Nozzle carrier head E05 – 3000 Spraying angle: 20°, 24°
Nozzle carrier head E24 – 3000 Spraying angle: 30°
E24 – 3000 Spraying angle: 30°
Operating information: The air motor is only to be used with dry, clean and lubricated air. Only fill up with pneumatic oil WOMA Mat.-No.: 9.890-539.0 – viscosity class ISO VG 46 –. The max. permitted air pressure of 6,5 bar has not to be exceeded.
Body support Mat.-No.: 6.025-301.0 Weight: 0,73 kg
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 36
2.1.12 HP 1500 RL-RC M14 x 1,5
Connection for air supply KS ¼”
Description:
The HP1500RL–RC is a high-pressure jetting gun equipped with a pneumatically driven rotary lead-through and a radio remote control. The radio remote control with safety function was specially designed for the professional and safe work with high-pressure units.
The composition of HP-Gun and nozzle carrier head represents a highly efficient water tool, which guarantees – depending on the rotation of the nozzle carrier head – a high surface treatment/cleaning rate.
The equipment includes the HP-gun with built-in transmitter, receiver „Reflektomat“, which is connected to the high-pressure unit by means of a cable, as well as two batteries and a battery charger. The equipment includes a safety lock, as well as a hand grip made of plastic and a pressure housing made of forged steel.
Radio technique:
Radio technique not subject to registration and non-chargeable in all EC countries and in Switzerland, other countries on request.
Special receiving procedure to avoid radio interferences dependent on reflection.
Especially suited for operation in halls, tunnels, in city centres and densely built-up areas.
Special characteristics:
Rotational speed adjustable by air pressure and
quantity
Low weight
Compact design with small dimensions
Optimum running qualities
Parts under pressure made of high-tensile stainless
steel
Turnable hand grip for easy handling
All moving parts are protected from dirt and water
invasion
Technical Data:
Material-No.: Operating pressure: Flow rate: Medium temperature: Weight: Working pressure of the air motor: Working pressure at working rpm: Air consumption: Sense of rotation: Length: Width: Height: Permissible recoil force without body support:
Permissible recoil force with body support:
9.893-640.0
max. 1500 bar
max. 25 l/min
max. +50 °C
approx. 5,50 kg
6,5 bar
0,16 kW 2500 1/min
0,4 m³/min at 6,5 bar
Clockwise in jet direction
approx. 850 mm
approx. 56 mm
approx. 200 mm
max. 150 N
max. 250 N
M22 x 1,5
Exhaust air
Receiver „Reflektomat“ Turbodüse TD1000 bzw. TD2000 siehe Produktblätter Z-147 bzw. Z-148
Magnetic holding device Turbodüse TD1000 bzw. TD2000 siehe Produktblätter Z-147 bzw. Z-148
Connection to HP-unit
Turbodüse TD1000 bzw. TD2000
siehe Produktblätter Z-147 bzw. Z-148
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 37
B
A
HP 1500 RL-RC - Components
Turnable hose connection
Material-No. B
9.872-624.0 M22x1,5 24˚ DK
9.872-436.0 M22x1,5 60˚ DK
9.872-437.0 M24x1,5 24˚ DK
9.872-438.0 G1/2 60˚ DK
Hose connection
Material-No. A
9.871-967.0 M22x1,5 24˚ DK
9.871-968.0 M22x1,5 60˚ DK
9.871-969.0 M24x1,5 24˚ DK
9.871-970.0 G1/2 A 60˚ DK
9.871-971.0 G3/4 A 60˚ DK
Nozzle carrier head Weight
Material-No. Number of nozzle form 21
Typ-bar kg
9.886-774.0 2 E02-3000 0,45
9.886-775.0 3 E03-3000 0,45
9.886-772.0 3 or 6 E05-3000 0,47
9.886-773.0 3 or 6 E09-3000 0,85
9.886-645.0 3 or 6 E24-3000 0,85
Nozzle carrier head E02 – 3000 Spraying angle: 20°
Nozzle carrier head E03 – 3000 Spraying angle: 30°
Nozzle carrier head E09 – 3000 Spraying angle: 20°, 24°
Nozzle carrier head E05 – 3000 Spraying angle: 20°, 24°
Nozzle carrier head E24 – 3000 Spraying angle: 30°
Operating information: The air motor is only to be used with dry, clean and lubricated air. Only fill up with pneumatic oil WOMA Mat.-No.: 9.890-539.0 – viscosity class ISO VG 46 –. The max. permitted air pressure of 6,5 bar has not to be exceeded.
Radio technique characteristics:
Permission-free frequency
in 70 cm volume
Capacity of transmitter: 10 mW Range: approx. 300 m
Supply voltage: 7,2 V
changeable battery
Battery charger: 115/230V AC
Receiver degree of protection: IP65
Voltageless potential-free relay contacts
Supply voltage: 12/24 V DC
Body support Mat.-No.: 6.025-301.0 Weight: 0,73 kg
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 38
High pressure connection
M22X 1,5
2.1.13 UWP 1500
Description: The UWP 1500 is an underwater gun with recoil compensation for an allowable operating pressure of 1500 bar. The flat jet nozzle form 19 (compensation nozzle) compensates the recoil forces.
Standard equipment includes: A trigger safety guard and latching trigger lock to prevent uninten-tional use, forged steel pressure housing and light weight polymerized hand grip. Advantages: High safety standard. All functional parts are protected from water invasion. With the conversion kit (Material – No.: 9.914-021.0) guns type HP 1500S-V can be converted to UWP 1500.
Technical data: Material-No.: 9.913-868.0 Operating pressure: max. 1500 bar Medium temperature: max. +100°C Weight: approx. 8,5kg Length: approx. 2632 mm Height: approx. 306 mm
Width: approx. 72 mm As compensating nozzle a flat jet nozzle form 19 min. 20˚ jet angle must be used.
High pressure nozzle
form 4 or 19 Compensation nozzle
form 19
HP 1500S-V
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 39
B
A
550 m
m
630 m
m
552 m
m
UWP 1500 - Components
Turnable hose connection
Material No. B
9.872-624.0 M22x1,5 24˚ DK
9.872-436.0 M22x1,5 60˚ DK
9.872-437.0 M24x1,5 24˚ DK
9.872-438.0 G1/2 60˚ DK
Hose connection
Material No. A
9.871-967.0 M22x1,5 24˚ DK
9.871-968.0 M22x1,5 60˚ DK
9.871-969.0 M24x1,5 24˚ DK
9.871-970.0 G1/2 A 60˚ DK
9.871-971.0 G3/4 A 60˚ DK
Compensating nozzle flat jet nozzle form 19 min. 20˚ jet angle
High pressure nozzle form 4 or 19
UWP 1500 Material-No.: 9.913-868.0
HP 1500S-V
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 40
2.2 TURNABLE HOSE CONNECTION
2.2.1 DSA 1500
Description: The turnable hose connection is a high performance rotary lead through which can be connected directly to WOMA guns type HP 1000 and HP 1500. The turnable hose connection prevents loops from forming at the high pressure hose during operating, which makes operation safer and more comfortable.
Advantages: No loop formation at the high pressure hose All parts subject to pressure are made of high-tensile stainless steel All functional parts are protected from dirt and water invasion.
Technical data: DSA 1500 Hose connection M22x1,5 60°DK
Material-No.: 9.872-436.0
DSA 1500 Hose connection M24x1,5 24°DK
Material-No.: 9.872-437.0
DSA 1500 Hose connection G1/2” 60°DK
Material-No.: 9.872-438.0
Operating pressure: max. 1500 bar
Flow rate 60 l/min
Medium temperature: max. + 100°C
Weight: appr. 0,55kg
Schlauchanschluss Hose connection
Pistolenanschluss Gun connection
M2
2x1,5
60°D
K
M2
4x1,5
24°D
K
G1/2
60°D
K
116 mm
3
9 m
m
M2
2x1,5
DZ
M2
2x1,5
DZ
M2
2x1,5
DZ
M2
2xM
22x1,5
60°D
K
M2
4x1,5
60°D
K
G1/2
60°D
K
DZ
M2
2x1,5
116 m
m
DZ
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 41
2.3 HOSE LINES
2.3.1 Up to 1250 bar
2.3.1.1 DN 12 – HST4K
Betriebsdruck:
Operating pressure:
Prüfdruck:
Test pressure:
Verwendung für:
To use for:
max.1100 bar
max.15950 psi
1650 bar
23925 psi
alle WOMA Produkte
all WOMA products
Aufbau: Schlauchseele aus Polyamid Druckträger aus zwei Wickellagen und zwei offenen Wickellagen Stahldraht hoher Zugfestigkeit Oberdecke aus Polyurethan Temperaturbereich: -10°C bis +70°C Construction: Polyamide inner tube Reinforcement of two spiral layers and two open layers of high tensile steel wire Polyurethane cover Operating temperature range: -10°C to +70°C Besondere Vorteile: geringes Gewicht und kleiner Biegeradius, daher besonders zu empfehlen als Pistolenschlauch.
Schlauchleitungen Hose tubes
Schlauchmeterware Hose per metre
Material-Nr.
Material-No.
Nennlänge
Nominal length
L = m
Gewicht
Weight
kg
Material-Nr.
Material-No.
Innen-Ø
Inner-Ø
DN mm
Außen-Ø
Outer-Ø
mm
Biegeradius
Bendradius
R = mm
Gewicht
Weight
kg/m
max. Lieferlänge
max. delivery length
m
9.913-833.0
5
4,6
9.913-834.0
10
8,6
9.913-850.0
13,0
23,0
100
0,80
100
9.913-835.0
20
16,6
Gewinde M nach DIN 13 / ISO 261; thread M as per DIN 13 / ISO 261
Special advantages: low weight and a small bend radius; therefore especially recommended as gun hose.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 42
Hose fitting and accessories DN 12 – HST4K
Überwurfarmatur
Swivel fitting Schlauchverbinder
Hose connector
Material-Nr.
Material-No.
Werkstoff
Material
L 1
mm
SW 1
Width across
flats
mm
O-Ring Material-Nr.
Material-No.
Material-Nr.
Material-No.
L 2
mm
L 3
mm
SW 2
mm
Werkstoff
Material
9.913-848.0
Stahl / Steel
89
30
6.025-315.0
9.877-911.0
65
20
32
NIRO / SS
45º Rohrkrümmer
45º Elbow
90º Rohrkrümmer
90º Elbow
Material-Nr.
Material-No.
Werkstoff
Material
L 4
mm
L 5
mm
SW 3
mm
O-Ring
Material-Nr.
Material-No
Material-Nr.
Material-No.
Werkstoff
Material
L 6
mm
L 7
mm
SW 4
mm
O-Ring
Material-Nr.
Material-No.
9.887-325.0
Stahl / Steel
100
43
30
9.882-191.0
9.887-324.0
Stahl / Steel
77
76
30
9.882-191.0
Gewinde M nach DIN 13 / ISO 261; thread M as per DIN 13 / ISO 261 NIRO = nichtrostender Stahl , SS = Stainless Steel
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 43
2.3.1.2 DN 12 – HST4G – SR3
Betriebsdruck
Operating pressure
Prüfdruck
Test pressure
Verwendung für
To use for
:
:
:
:
:
:
max. 1100 bar
max. 15950 psi
1650 bar
23925 psi
alle WOMA Produkte
all WOMA products
Aufbau :
Schlauchseele aus synthetischem Gummi Druckträger aus vier Draht-Spirallagen. Oberdecke aus synthetischem Gummi Temperaturbereich: -10°C bis +80°C Construction :
Synthetic rubber inner tube 4 spiralwire reinforcement Synthetic rubber cover Operating temperature range: -10°C to +80°C
Schlauchleitungen Hose tubes
Schlauchmeterware Hose per metre
Material-Nr.
Material-No.
Nennlänge
Nominal length
L = m
Gewicht
Weight
kg
Einbindung mit Armaturen
Equipped with fittings
Werkstoff/Material
Material-Nr.
Material-No.
Innen-φ
Inner-φ
φ i
mm
Außen-φ
Outer-φ
φ a
mm
Biegeradius
Bendradius
R = mm
Gewicht
Weight
kg/m
max. Lieferlänge
max. delivery length
m
9.887-887.0
10
14,9
Stahl / Steel
9.887-888.0
20
28,8
Stahl / Steel
9.887-890.0
12,7
27,0
250
1,39
40
9.887-889.0
40
56,6
Stahl / Steel
Gewinde M nach DIN 13 / ISO 261; thread M as per DIN 13 / ISO 261
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 44
Hose fittings and accessories DN 12 – HST4G – SR3
Überwurfarmatur
Swivel fitting Schlauchverbinder
Hose connector
Material-Nr.
Material-No.
Werkstoff
Material
L 1
mm
SW 1
Width across flats
mm
O-Ring
Material-Nr. Material-No.
Teile-Nr.
Part-No.
L 2
mm
L 3
mm
SW 2
mm
Werkstoff
Material
9.887-891.0
Stahl / Steel
110
30
6.025-315.0
9.877-911.0
65
20
32
NIRO / SS
45º Rohrkrümmer
45º Elbow
90º Rohrkrümmer
90º Elbow
Material-Nr.
Material-No.
Werkstoff
Material
L 4
mm
L 5
mm
SW 3
mm
O-Ring
Material-Nr. Material-No.
Material-Nr.
Material-No.
Werkstoff
Material
L 6
mm
L 7
mm
SW 4
mm
O-Ring
Material-Nr. Material-No.
9.887-325.0
Stahl / Steel
100
43
30
9.882-191.0
9.887-324.0
9.888-507.0
Stahl / Steel
NIRO / SS
77
96
76
64
30
30
9.882-191.0
Gewinde M nach DIN 13 / ISO 261; thread M as per DIN 13 / ISO 261 NIRO = nichtrostender Stahl , SS = Stainless Steel
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 45
2.3.1.3 DN 10 - HST4G - H for hot water application up to 100° C
Betriebsdruck:
Operating pressure:
Prüfdruck:
Test pressure:
Temperaturbereich:
Operating temperature range:
Verwendung für:
To use for:
max.1250 bar
max. 18120 psi
1875 bar
27190 psi
-10° C bis +100° C
-10° C to +100° C
Ecotherm 800
Ecotherm 800
Aufbau : Schlauchseele aus hochtemperaturbeständigem synthetischem Gummi Druckträger aus vier Draht-Spirallagen Oberdecke aus synthetischem Gummi Construction : High temperature resistant synthetic rubber tube 4-spiralwire reinforcement Cover of synthetic rubber
Gewinde M nach DIN 13 / ISO 261; thread M as per DIN 13 / ISO 261
DKO = für Dichtkonus 24° / for sealing cone 24° Schlauchverbinder / Hose connector: TN / PN 9.877-911.0
O-Ring: MN / MN 6.025-314.0
Schlauchleitungen Hose tubes
Schlauchmeterware Hose per metre
Material-Nr.
Material-No.
Nennlänge
Nominal length
L = m
Gewicht
Weight
kg
Einbindung mit Armaturen
Equipped with fittings
Werkstoff/Material
Material-Nr.
Material-No.
Innen-Ø
Inner-Ø Ø i
mm
Außen-Ø
Outer-Ø Ø a
mm
Biegeradius
Bendradius
R = mm
Gewicht
Weight
kg/m
max. Lieferlänge
max. delivery length
m
9.887-566.0 20 17,3 Stahl/verzinkt
9.909-769.0 30 25,8 Steel/ 10 21,4 150 0,85 100
9.910-972.0 40 34,3 galvanized
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 46
2.3.1.4 DN 10-HST4G-SR3 Betriebsdruck:
Operating pressure:
Prüfdruck:
Test pressure:
Verwendung für:
To use for:
max.1250 bar
max.18120 psi
1875 bar
27190 psi
alle WOMA Produkte
all WOMA products
Aufbau : Schlauchseele aus synthetischem Gummi Druckträger aus vier Draht-Spirallagenlagen Oberdecke aus synthetischem Gummi Temperaturbereich: -10°C bis +70°C Construction : Synthetic rubber inner tube 4 spiralwire reinforcement Synthetic rubber cover Operating temperature range: -10°C to +70°C
Schlauchleitungen Hose tubes
Schlauchmeterware Hose per metre
Material-Nr.
Material-No.
Nennlänge
Nominal length
L = m
Gewicht
Weight
kg
Innen-Ø
Inner-Ø Ø i
mm
Außen-Ø
Outer-Ø Ø a
mm
Biegeradius
Bendradius
R = mm
Gewicht
Weight
kg/m
max. Lieferlänge
max. delivery length
m
9.887-903.0 10 8,7
9.887-904.0 20 16,8 9,5 20,4 230 0,815 20
Gewinde M nach DIN 13 / ISO 261 Thread M as per DIN 13 / ISO 261
O-Ring MN/MN 9.882-282.0 Schlauchverbinder Hose connector TN/PN 9.878-012.0
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 47
2.3.1.5 DN 10-HST4G-SR3
Betriebsdruck
Operating pressure
Prüfdruck
Test pressure
Verwendung für
To use for
:
:
:
:
:
:
max. 1250 bar
max. 18120 psi
1875 bar
27190 psi
alle WOMA Produkte
all WOMA products
Aufbau :
Schlauchseele aus synthetischem Gummi Druckträger aus vier Draht-Spirallagenlagen Oberdecke aus synthetischem Gummi Temperaturbereich: -10°C bis +70°C Construction :
Synthetic rubber inner tube 4 spiralwire reinforcement Synthetic rubber cover Operating temperature range: -10°C to +70°C
Schlauchleitungen Hose tubes
Schlauchmeterware Hose per metre
Material-Nr.
Material-No.
Nennlänge
Nominal length
L = m
Gewicht
Weight
kg
Innen-Ø
Inner-Ø Ø i
mm
Außen-Ø
Outer-Ø Ø a
mm
Biegeradius
Bendradius
R = mm
Gewicht
Weight
kg/m
max. Lieferlänge
max. delivery length
m
9.887-894.0 10 8,7
9.887-895.0 20 16,8 9,5 20,4 230 0,815 20
Gewinde M nach DIN 13 / ISO 261 Thread M as per DIN 13 / ISO 261
O-Ring MN/MN 6.025-315.0
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 48
Accessories
Betriebsdruck: max. 1500 bar
Operating pressure: max. 21750 psi
Schlauchverbinder
Hose connector
Material-Nr.
Material-No.
L 2
mm
L 3
mm
SW 2
mm
Werkstoff
Material
9.877-911.0
65
20
32
NIRO / SS
45º Rohrkrümmer
45º Elbow
90º Rohrkrümmer
90º Elbow
Material -Nr.
Material -No.
Werkstoff
Material
L 4
mm
L 5
mm
SW 3
mm
O-Ring
Teile-Nr. Part-No.
Material -Nr.
Material -No.
Werkstoff
Material
L 6
mm
L 7
mm
SW 4
mm
O-Ring
Teile-Nr. Part-No.
9.887-325.0
Stahl / Steel
100
43
30
9.882-191.0
9.887-324.0
Stahl / Steel
77
76
30
9.882-191.0
Gewinde M nach DIN 13 / ISO 261; thread M as per DIN 13 / ISO 261 NIRO = nichtrostender Stahl , SS = Stainless Steel
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 49
2.3.2 Up to 1500 bar
2.3.2.1 DN 10-HST4K
Betriebsdruck
Operating pressure
Prüfdruck
Test pressure
Verwendung für
To use for
:
:
:
:
:
:
max. 1600 bar
max. 23200 psi
2400 bar
34800 psi
alle WOMA Produkte
all WOMA products
Aufbau :
Schlauchseele aus Polyamid Druckträger aus vier und zwei Drahtlagen Oberdecke aus Polyurethan, blau Temperaturbereich: -10°C bis +70°C Construction :
Polyamide inner tube 4 and 2 wire reinforcement Cover of Polyurethane, blue Operating temperature range: -10°C to +70°C
Schlauchleitungen Hose tubes
Schlauchmeterware Hose per metre
Material-Nr..
Material-No.
Nennlänge
Nominal length
L = m
Gewicht
Weight
kg
Innen-Ø
Inner-Ø Ø i
mm
Außen-Ø
Outer-Ø Ø a
mm
Biegeradius
Bendradius
R = mm
Gewicht
Weight
kg/m
max. Lieferlänge
max. delivery length
m
9.887-866.0 10 10,2
9.887-867.0 20 19,6 9,8 21,6 95 0,94 300
9.910-987.0 40 38,4
Gewinde M nach DIN 13 / ISO 261 Thread M as per DIN 13 / ISO 261
O-Ring TN/PN 6.025-315.0
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 50
Accessories
Betriebsdruck: max. 1500 bar
Operating pressure: max. 21750 psi
Schlauchverbinder
Hose connector
Material-Nr.
Material-No.
L 2
mm
L 3
mm
SW 2
mm
Werkstoff
Material
9.877-911.0
65
20
32
NIRO / SS
45º Rohrkrümmer
45º Elbow
90º Rohrkrümmer
90º Elbow
Material-Nr.
Material-No.
Werkstoff
Material
L 4
mm
L 5
mm
SW 3
mm
O-Ring
Material-Nr.. Part-No.
Material-Nr.
Material-No.
Werkstoff
Material
L 6
mm
L 7
mm
SW 4
mm
O-Ring
Material-Nr.. Part-No.
9.887-325.0
Stahl / Steel
100
43
30
9.882-191.0
9.887-324.0
Stahl / Steel
77
76
30
9.882-191.0
Gewinde M nach DIN 13 / ISO 261; thread M as per DIN 13 / ISO 261 NIRO = nichtrostender Stahl , SS = Stainless Steel
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 51
2.3.2.2 DN 12 – HST6G – SR3
Betriebsdruck
Operating pressure
Prüfdruck
Test pressure
Verwendung für
To use for
:
:
:
:
:
:
max. 1450 bar
max. 21025 psi
2175 bar
31535 psi
alle WOMA Produkte
all WOMA products
Aufbau :
Schlauchseele aus synthetischem Gummi Druckträger aus sechs Draht-Spirallagenlagen Oberdecke aus synthetischem Gummi Temperaturbereich: -10°C bis +80°C Construction :
Synthetic rubber inner tube 6 spiralwire reinforcement Synthetic rubber cover Operating temperature range: -10°C to +80°C
Schlauchleitungen Hose tubes
Schlauchmeterware Hose per metre
Material-Nr.
Material -No.
Nennlänge
Nominal length
L = m
Gewicht
Weight
kg
Einbindung mit Armaturen
Equipped with fittings
Werkstoff/Material
Material -Nr.
Material -No.
Innen-φ
Inner-φ
φ i
mm
Außen-φ
Outer-φ
φ a
mm
Biegeradius
Bendradius
R = mm
Gewicht
Weight
kg/m
max. Lieferlänge
max. delivery length
m
9.887-878.0
10
19,7
Stahl / Steel
9.887-880.0
12,7
28,9
250
1,87
20
9.887-879.0
20
38,4
Stahl / Steel
Gewinde M nach DIN 13 / ISO 261; thread M as per DIN 13 / ISO 261
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 52
Hose fittings and accessories DN 12 – HST6G – SR3
Überwurfarmatur Swivel fitting
Schlauchverbinder Hose connector
Material -Nr.
Material -No.
Werkstoff
Material
L 1
mm
SW 1
Width across flats
mm
O-Ring
Material -Nr. Material -No.
Material -Nr.
Material -No.
L 2
mm
L 3
mm
SW 2
mm
Werkstoff
Material
9.887-881.0
Stahl / Steel
110
30
6.025-315.0
9.877-911.0
65
20
32
NIRO / SS
45º Rohrkrümmer
45º Elbow
90º Rohrkrümmer
90º Elbow
Material -Nr.
Material -No.
Werkstoff
Material
L 4
mm
L 5
mm
SW 3
mm
O-Ring
Material -Nr. Material t-No.
Material -Nr.
Material -No.
Werkstoff
Material
L 6
mm
L 7
mm
SW 4
mm
O-Ring
Material -Nr. Material -No.
9.887-325.0
Stahl / Steel
100
43
30
9.882-191.0
9.887-324.0
9.871-686.0
Stahl / Steel
NIRO /
SS
77 *
76 *
30 *
9.882-191.0
Gewinde M nach DIN 13 / ISO 261; thread M as per DIN 13 / ISO 261 NIRO = nichtrostender Stahl , SS = Stainless Steel
*siehe separate Zeichnung / see separate drawing
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 53
M22x1,5
1 1/8“ – 12UNF
3 PRESSURE RANGE UP TO 3000 BAR
3.1 GUNS
3.1.1 HP 3000 S-E-24V
Description: The HP 3000S-RV-E-24V is a high pressure jetting gun which incorporates a low voltage micro switch into its design without mechanical valve. Via the micro switch the high-pressure operation of the unit can be switched on or off. This facilitates work and increases worker safety. Standard equipment includes: A check valve, trigger safety guard and latching trigger lock to prevent unintentional use, forged steel pressure housing and light weight polymerized hand grip Advantages: High safety standard Turnable hand grip Fully encapsulated polymerized hand grip offers high tensile strength and excellent resistant to most chemicals. All functional parts are protected from dirt and water invasion.
Technical data: Material-No.: 9.915-265.0 Operating pressure : max. 3000 bar Medium temperature: max. +100°C Recoil force perm. without body support: max. 150 N Recoil force perm. with body support: max. 250 N Weight: approx. 2,1 kg Length: approx. 344 mm Highth: approx. 200 mm Width: approx. 50 mm
Trigger Safety guard Safety lock
Remote control unit with electric contact E-24V
Hand grip
9/1
6“-
18
UN
F-L
H
E-cable
Pressure housing
Druckgehäuse mit mechanischem Ventil
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 54
HP 3000 S-E-24V - Components
Nozzle connection
Material No. for nozzle form
9.873-090.0
1
Round jet nozzle max 2500 bar
9.873-090.0 8 Flat jet nozzle max 2500 bar
9.878-291.0 21 Round jet nozzle max 3000 bar
Nozzle carrier head
Weigth
Material No. Number of nozzle form 21
Type-bar kg
9.886-774.0 2 E02-3000 0,45
9.886-775.0 3 E03-3000 0,45
9.886-772.0 3 oder 6 E05-3000 0,47
9.886-773.0 3 oder 6 E09-3000 0,85
9.886-645.0 3 oder 6 E24-3000 0,85
Nozzle pipe Weight
Material No. L (mm) kg
9.891-225.0 300 0,34
9.891-226.0 500 0,55
9.891-227.0 800 0,87
9.891-228.0 1000 1,09
9.891-229.0 1500 1,64
9.891-230.0 2000 2,17
9.891-231.0 3000 3,24
9.891-232.0 4000 4,32
9.892-859.0 5000 5,40
9.892-860.0 6000 6,47
Body support Mat.-No.: 6.025-301.0 Weight approx. 0,73 kg
L
Hand grip Mat.-No.: 6.025-300.0
Hand grip Mat.-No.: 9.871-675.0
9/16“–18UNF LH
9/16“–18UNF LH
14,3
Gun housing cpl. HP 3000S-E-24V Mat.-No.: 9.915-265.0 Wight: approx. 2,1 kg
E24 E02 E05 E03 E09
Turbo nozzle
Orbimaster
Speedy 3000
M14x1,5
Check valve (optional) RV3000-E. Mat.-No.: 9.872-645.0 Wight: approx. 0,7 kg
Hose connection 9/16” UNF-LH Mat.-No.: 9.872-023.0 Weight: 0,2 kg
Turnable hose connection 9/16“ UNF-LH Mat.-No.: 9.872-640.0 Weight: 0,9 kg
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 55
3.1.2 HP 3000 S-E-24V-Z
Description: The HP 3000S-RV-E-24V-Z is a high pressure jetting gun with two hand operation, which incorporates a second remote control unit resp. a second low voltage micro switch into its design without mechanical valve. The second operational control increases safety standard. Via the electric contacts, the high pressure operation of the unit can be switched on or off. This facilitates work and increases worker safety. Standard equipment includes: A check valve, trigger safety guard and latching trigger lock to prevent unintentional use, forged steel pressure housing and light weight polymerized hand grip. Special Advantages:
High safety standard
Two hand operation
Turnable hand grip for easy operation
Fully encapsulated polymerized hand grip offers high tensile strength and excellent resistant to most chemicals
All functional parts are protected from dirt and water invasion
Technical Data:
Material No.: 9.915-276.0
Operating pressure: max. 3000 bar
Medium temperature: max. 100 °C
Recoil force perm. without body support:
max. 150 N
Recoil force perm. with body support:
max. 250 N
Weight:
approx. 2,7 kg
Length (second operational control incl.):
approx. 700 mm
Height: approx. 200 mm
Width: approx. 50 mm
Trigger Safety guard Safety lock
Remote control unit with electric contact E-24VDC
E-cable
1 1/8“ – 12 UNF Second operational control with electric contact E-24V DC
Pressure housing
9/16“-18UNF-LH
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 56
HP 3000S-E-24V-Z – Components
Nozzle connection
Material No. For nozzle form
9.873-090.0
1
Round jet nozzle max 2500 bar
9.873-090.0 8 Flat jet nozzle max 2500 bar
9.878-291.0 21 Round jet nozzle max 3000 bar Nozzle carrier head
Weight
Material No. Number of nozzle form 21
Type-bar kg
9.886-774.0 2 E02-3000 0,45
9.886-775.0 3 E03-3000 0,45
9.886-772.0 3 oder 6 E05-3000 0,47
9.886-773.0 3 oder 6 E09-3000 0,85
9.886-645.0 3 oder 6 E24-3000 0,85
Nozzle pipe Weight
Material No. L (mm) kg
9.891-227.0 800 0,87
9.891-228.0 1000 1,09
9.891-229.0 1500 1,64
9.891-230.0 2000 2,17
9.891-231.0 3000 3,24
9.891-232.0 4000 4,32
9.892-859.0 5000 5,40
9.892-860.0 6000 6,47
Body support Mat.-No.: 6.025-301.0 Weight approx. 0,73 kg
Gun housing cpl. HP 3000S-E-24V-Z Mat.-No.: 9.915-276.0 Weight: approx. 2,7 kg
L
9/16“–18UNF LH
9/16“–18UNF LH
14,3
E24 E02 E05 E03 E09 Turbo nozzle Orbimaster Speedy 3000
M14x1,5
Check valve (optional) RV3000-E. Mat.-No.: 9.872-645.0 Weight: approx. 0,7 kg
Turnable hose connection 9/16” UNF-LH Mat.-No.: 9.872-640.0 Weight: 0,9 kg
Hose connection 9/16“ UNF-LH Mat.-No.: 9.872-023.0 Gewicht: 0,2 kg
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 57
M22x1,5
1 1/8“ – 12UNF
3.1.3 HP 3000 S-E-EXI
Description: The HP 3000S-RV-E-EXI is a high pressure-jetting gun which incorporates a low voltage micro switch into its design without mechanical valve. Via the micro switch the high-pressure operation of the unit can be switched on or off. This facilitates work and increases worker safety. Standard equipment includes: A check valve, trigger safety guard and latching trigger lock to prevent unintentional use, forged steel pressure housing and light weight polymerized hand grip Advantages: High safety standard Turnable hand grip Fully encapsulated polymerized hand grip offers high tensile strength and excellent resistant to most chemicals. All functional parts are protected from dirt and water invasion.
Technical data: Material - No.: 9.915-273.0 Operating pressure : max. 3000 bar Medium temperature: max. + 100°C Recoil force perm. without body support: max. 150 N Recoil force perm. with body support: max. 250 N Weight: approx. 2,2 kg Length: approx. 344 mm Height: approx. 200 mm Width: approx. 50 mm
Trigger Safety guard Safety lock
Remote control unit with
electric contact E-EXI
Hand grip
9/1
6“-
18U
NF
-LH
E-Cable
Pressure housing
Druckgehäuse mit mechanischem Ventil
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 58
HP 3000S-E-EXI - Components
Nozzle connection
Material No. For nozzle form
9.873-090.0
1
Round jet nozzle max 2500 bar
9.873-090.0 8 Flat jet nozzle max 2500 bar
9.878-291.0 21 Round jet nozzle max 3000 bar Nozzle carrier head
Weight
Material No. Number of nozzles form 21
Type-bar kg
9.886-774.0 2 E02-3000 0,45
9.886-775.0 3 E03-3000 0,45
9.886-772.0 3 oder 6 E05-3000 0,47
9.886-773.0 3 oder 6 E09-3000 0,85
9.886-645.0 3 oder 6 E24-3000 0,85
Nozzle pipe Weight
Material No. L (mm) kg
9.891-225.0 300 0,34
9.891-226.0 500 0,55
9.891-227.0 800 0,87
9.891-228.0 1000 1,09
9.891-229.0 1500 1,64
9.891-230.0 2000 2,17
9.891-231.0 3000 3,24
9.891-232.0 4000 4,32
9.892-859.0 5000 5,40
9.892-860.0 6000 6,47
Body support Mat.-No.: 6.025-301.0 Weight approx. 0,73 kg
Gun housing cpl. HP 3000S-E-EXI Mat.-No.: 9.915-273.0 Weight: approx. 2,8 kg
E24 E02 E05 E03 E09 Turbo nozzle Orbimaster Speedy 3000
M14x1,5
Check valve (optional) RV3000-E. Mat.-No.: 9.872-645.0 Weight: approx. 0,7 kg
L
Hand grip Mat.-No.: 6.025-300.0
Hand grip Mat.-No.: 9.871-675.0
9/16“–18UNF LH
9/16“–18UNF LH
14,3
Turnable hose connection 9/16” UNF-LH Mat.-No.: 9.872-640.0 Weight: 0,9 kg
Hose connection 9/16” UNF-LH Mat.-No.: 9.872-023.0 Weight: 0,2 kg
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 59
3.1.4 HP 3000 S-E-EXI-Z
Description: The HP 3000S-RV-E-EXI-Z is a high pressure jetting gun with two hand operation, which incorporates a second remote control unit resp. a second low voltage micro switch into its design without mechanical valve.
The second operational control increases safety standard.
Via the electric contacts, the high pressure operation of the unit can be switched on or off. This facilitates work and increases worker safety.
Standard equipment includes: A check valve, trigger safety guard and latching trigger lock to prevent unintentional use, forged steel pressure housing and light weight polymerized hand grip. Special Advantages:
High safety standard
Two hand operation
Turnable hand grip for easy operation
Fully encapsulated polymerized hand gripoffers high tensile strength and excellentresistant to most chemicals.
All functional parts are protected from dirt and water invasion.
Technical Data:
Material No.: 9.915-278.0
Operating pressure: max. 3000 bar
Medium temperature: max. 100 °C
Recoil force perm. without body support:
max. 150 N
Recoil force perm. with body support:
max. 250 N
Weight:
approx. 2,7 kg
Length (second operational contro incl.):
approx. 700 mm
Height: approx. 200 mm
Width: approx. 50 mm
Trigger Safety guard Safety lock
Remote control unit with electric contact E-EXI
E-cable
1 1/8“ – 12 UNF Secont operational control with electric contact E-EXI
Pressure housing
9/16“-18UNF-LH
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 60
HP 3000S-E-EXI-Z – Components
Nozzle connection
Material No. For nozzle form
9.873-090.0
1
Round jet nozzle max 2500 bar
9.873-090.0 8 Flat jet nozzle max 2500 bar
9.878-291.0 21 Round jet nozzle max 3000 bar Nozzle carrier head
Weight
Material No. Number of nozzles form 21
Type-bar kg
9.886-774.0 2 E02-3000 0,45
9.886-775.0 3 E03-3000 0,45
9.886-772.0 3 oder 6 E05-3000 0,47
9.886-773.0 3 oder 6 E09-3000 0,85
9.886-645.0 3 oder 6 E24-3000 0,85
Nozzle pipe Weight
Material No. L (mm) kg
9.891-227.0 800 0,87
9.891-228.0 1000 1,09
9.891-229.0 1500 1,64
9.891-230.0 2000 2,17
9.891-231.0 3000 3,24
9.891-232.0 4000 4,32
9.892-859.0 5000 5,40
9.892-860.0 6000 6,47
Body support Mat.-No.: 6.025-301.0 Weight approx. 0,73 kg
Gun housing cpl. HP 3000S-E-EXI-Z Mat.-No.: 9.915-278.0 Weight: approx. 2,7 kg
L
9/16“–18UNF LH
9/16“–18UNF LH
14,3
E24 E02 E05 E03 E09 Turbo nozzle Orbimaster Speedy 3000
M14x1,5
Check valve (optional) RV3000-E. Mat.-No.: 9.872-645.0 Weight: approx. 0,7 kg
Turnable hose connection 9/16” UNF-LH Mat.-No.: 9.872-640.0 Weight: 0,9 kg
Hose connection 9/16” UNF-LH Mat.-No.: 9.872-023.0 Weight: 0,2 kg
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 61
M22x1,5
9/1
6“-
18U
NF
-LH
¾“ – 16UNF ¾“ – 16UNF
M1
2
3.1.5 HP 3000 S-VDG-Ergo
Description: The HP 3000S-VDG-Ergo is a positive shutoff type high pressure jetting gun which incorporates an internal on / off valve and a bypass for a max. operating pressure of 3000 bar. A patented power transfer mechanism prevents premature fatigue of the operator's hand and has a positive effect on the service life of the gun. In non-actuating trigger position, the flow medium will lead through the bypass line and the high pressure aggregate becomes pressureless. Standard equipment includes; a trigger safety guard, latching trigger lock to prevent unintentional use, forget steel pressure housing and light weight polymerized hand grip. Advantages:
High safety standard
Patented power transfer mechanism.
Quick switching operation
Turnable hand grip for easy operation
Full encapsulated polymerized hand grip offers high tensile strength and excellent resistant to most chemicals.
All functional parts are protected from dirt and water invasion.
Technical Data:
Material-No.: 9.871-351.0 Operating pressure: max. 3000 bar Medium temperature: max. +100°C Recoil force perm. without body support: max. 150 N Recoil force perm. with body support: max. 250 N Weight: approx. 3,0 kg Length: approx.400 mm Height: approx.200 mm Width: approx. 50 mm
Trigger Safety guard Safety lock
Pressure housing with on-off valve
1 1/8 – 12 UNF
Handgrip
G3/4" (Bypass connection)
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 62
HP 3000S-VDG-Ergo – Components
Nozzle connection
Material No for nozzle form
9.873-090.0 1
Round jet nozzle max. 3000 bar
9.873-090.0 8 Flat jet nozzle max. 3000 bar
9.878-291.0 21 Round jet nozzle max. 3000 bar
Nozzle carrier head Weight
Material No. Number of nozzle form
21
Type-bar kg
9.886-774.0 2 E02-3000 0,45
9.886-775.0 3 E03-3000 0,45
9.886-772.0 3 or 6 E05-3000 0,47
9.886-773.0 3 or 6 E09-3000 0,85
9.886-645.0 3 or 6 E24-3000 0,85
Nozzle pipe Weight
Material No. L (mm) kg
9.891-225.0 300 0,34
9.891-226.0 500 0,55
9.891-227.0 800 0,87
9.891-228.0 1000 1,09
9.891-229.0 1500 1,64
9.891-230.0 2000 2,17
9.891-231.0 3000 3,24
9.891-232.0 4000 4,32
9.892-859.0 5000 5,40
9.892-860.0 6000 6,47
E24
L
Gun housing cpl. HP 3000S-VDG-Ergo Mat.-No.: 9.871-351.0 Weight: approx. 3,0 kg
Hand grip Mat.-No.: 6.025-300.0
Hand grip Mat.-No.: 9.871-675.0
9/16“–18UNF LH
14,3
Body support Mat.-No.: 6.025-301.0 Weight: approx. 0,73 kg
Turnable hose connection 9/16” UNF-LH Mat. -No.: 9.872-640.0 Weight: 0,9 kg
Hose connection 9/16” UNF-LH Mat.-No.: 9.872-023.0 Weight: 0,2 kg
Bypass tube Mat.-No.: 9.887-970.0 Weight: 0,6 kg Length: 1,5 m
Turbo nozzle E24 E02 E05 E03 E09 Orbimaster Speedy 3000
M14x1,5
9/16“–18UNF LH
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 63
3.1.6 HP 3000 S-RC
Pipe connection Transmitter 9/16-18UNF LH HD-Connection 1 1/8“-12UNF Safety guard Trigger Changeable battery Safety lock Hand grip
Receiver „Reflektomat“ Magnetic holding device Connection to HP unit
Description:
The HP 3000S-RV–RC is a high-pressure jetting gun equipped
with radio remote control and no internal mechanical valve.
The radio remote control has a safety function and was
specially designed for professional and safe operation with high
pressure units.
Via the radio signal, the high pressure operation of the unit can
be switched on or off. This facilitates work and increases
worker safety.
The system consists of a high-pressure gun with built-in
transmitter and a receiver „Reflektomat“, which is connected to
the high-pressure unit by means of a cable; also included are
two batteries and a battery charger.
The equipment includes a check valve, a safety guard and a
safety lock as well as a hand grip made of plastic and a
pressure housing made of forged steel.
Radio technique:
Radio system not subject to registration and non-chargeable in
all EC countries and in Switzerland, other countries supplied on
request Special receiving procedure to avoid radio interference
dependent on reflection
Specially suited for operation in halls, tunnels, in city centers
and densely populated areas
Advantages:
High reliability, big interference invulnerability and
data security
Check valve for high-speed shut-off
Turnable hand grip for easy handling
Fully encapsulated polymerised hand grip in two-
section design offers high tensile strength and
excellent resistance to most chemicals
All moving parts are protected from dirt and water
invasion.
Technical Data:
Material-No.: 9.915-277.0
Operating pressure: max. 3000 bar
Medium temperature: max. +100 °C
Recoil force perm. without body support:
max. 150 N
Rückstoßkraft perm. with body support:
max. 250 N
Weight: approx. 2,7 kg
Length: approx. 380 mm
Height: approx. 200 mm
Width: approx. 80 mm
Frequency not subjetct to approval in 70 cm tape
Capacity of transmitter: 10 mW
Range of transmisson: approx. 300 m
Supply voltage: 7,2 V changeable battery
Charger: 115/230 V AC
Receiver – degree of protection:
IP 65
Potential-free relay contacts
Supply voltage 12/24 V DC
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 64
HP 3000S-RC - Components
Nozzle connection
Material Nr. for nozzle form
9.873-090.0
1
Round jet nozzle max 2500 bar
9.873-090.0 8 Flat jet nozzle max 2500 bar
9.878-291.0 21 Round jet nozzle max 3000 bar
Nozzle carrier head
Weight
Material No. Number of nozzles form 21
Type-bar kg
9.886-774.0 2 E02-3000 0,45
9.886-775.0 3 E03-3000 0,45
9.886-772.0 3 oder 6 E05-3000 0,47
9.886-773.0 3 oder 6 E09-3000 0,85
9.886-645.0 3 oder 6 E24-3000 0,85
Nozzle pipe Weight
Material No. L (mm) kg
9.891-225.0 300 0,34
9.891-226.0 500 0,55
9.891-227.0 800 0,87
9.891-228.0 1000 1,09
9.891-229.0 1500 1,64
9.891-230.0 2000 2,17
9.891-231.0 3000 3,24
9.891-232.0 4000 4,32
9.892-859.0 5000 5,40
9.892-860.0 6000 6,47
Body support Mat.-No.: 6.025-301.0 Weight: approx.. 0,73 kg
Gun housing cpl. HP 3000S-RC Mat.-No.: 9.915-277.0 Weight: approx. 2,7 kg
L
Hand grip Mat.-No.: 6.025-300.0
Hand grip Mat.-No.: 9.871-675.0
9/16“–18UNF LH
9/16“–18UNF LH
14,3
Turnable hose connection 9/16” UNF-LH Mat.-No.: 9.872-640.0 Weight: 0,9 kg
Hose connection 9/16” UNF-LH Mat.-No.: 9.872-023.0 Weight: 0,2 kg
Radio Technique: Included in the extent of supply of the HP gun: - HD-gun with transmitter - Receiver „Reflektomat“ with 5 m cable - Two changeable batteries 7,2 V - Battery charger 115 / 230 V AC Option: - Changeable battery 7,2 V, Mat. No.: 9.889-694.0 - Battery charger 12 / 24 V DC, Mat No.: 9.889-695.0
E24 E02 E05 E03 E09 Turbo nozzle
Orbimaster Speedy 3000
M14x1,5
Check valve (optional) RV3000-E. Mat.-No.: 9.872-645.0 Weight: approx. 0,7 kg
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 65
3.1.7 HP 3000 RL-E-24V
Connection for air supply KS ¼”
Description: The HP3000RL–E–24V is a high-pressure jetting gun equipped with a pneumatically driven rotary lead-through and an electric remote control, suitable for a wide range of application. The composition of HP-Gun and nozzle carrier head represents a highly efficient water tool, which guarantees – depending on the rotation of the nozzle carrier head – a high surface treatment/cleaning rate. The equipment includes a safety lock, as well as a hand grip made of plastic and a pressure housing made of forged steel.
Special characteristics:
Rotational speed adjustable by air pressure
and quantity
Low weight
Compact design with small dimensions
Optimum running qualities
Parts under pressure made of high-tensile
stainless steel
Turnable hand grip for easy handling
All moving parts are protected from dirt and
water invasion
Technical Data: Material-No.: Operating pressure: Flow rate: Medium temperature: Weight: Working pressure of the air motor: Working pressure at working rpm: Air consumption: Sense of rotation: Length: Width: Height: Permissible recoil force without body support: Permissible recoil force with body support:
9.871-292.0
max. 3000 bar
max. 25 l/min
max. +50 °C
approx. 5,50 kg
6,5 bar
0,16 kW 2500 1/min
0,4 m³/min at 6,5 bar
Clockwise in jet direction
approx. 800 mm
approx. 56 mm
approx. 200 mm
max. 150 N
max. 250 N
M1
4 x
1,5
1 1/8 – 12UNF
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 66
HP 3000 RL-E-24V - Components
Nozzle carrier head Weight
Material No. Number of nozzle form
21
Type-bar kg
9.886-774.0 2 E02-3000 0,45
9.886-775.0 3 E03-3000 0,45
9.886-772.0 3 or 6 E05-3000 0,47
9.886-773.0 3 or 6 E09-3000 0,85
9.886-645.0 3 or 6 E24-3000 0,85
Operating information: The air motor is only to be used with dry, clean and lubricated air. Only fill up with pneumatic oil WOMA PN 9.890-539.0 – viscosity class ISO VG 46 –. The max. permitted air pressure of 6,5 bar has not to be exceeded.
Body support Mat.-No: 6.025-301.0 Weight: 0,73 kg
Turnable hose connection 9/16” UNF-LH Material -No.: 9.872-640.0 Weight: 0,9 kg
Hose connection 9/16” UNF-LH Material -No.: 9.872-023.0 Weight: 0,2 kg
Nozzle carrier head E02 – 3000 Spraying angle: 20°
Nozzle carrier head E03 – 3000 Spraying angle: 30°
Nozzle carrier head E05 – 3000 Spraying angle: 20°, 24°
Nozzle carrier head E09 – 3000 Spraying angle: 20°, 24°
Nozzle carrier head E24 – 3000 Spraying angle: 30°
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 67
3.1.8 HP 3000 RL-E-EXI
Description:
The HP3000RL–E–EXI is a high-pressure jetting gun equipped with a pneumatically driven rotary lead-through and an electric remote control, suitable for a wide range of application. The composition of HP-Gun and nozzle carrier head represents a highly efficient water tool, which guarantees – depending on the rotation of the nozzle carrier head – a high surface treatment/cleaning rate. The equipment includes a safety lock, as well as a hand grip made of plastic and a pressure housing made of forged steel.
Special characteristics:
Rotational speed adjustable by air pressure
and quantity
Low weight
Compact design with small dimensions
Optimum running qualities
Parts under pressure made of high-tensile
stainless steel
Turnable hand grip for easy handling
All moving parts are protected from dirt and
water invasion
Technical Data: Material-No.: Operating pressure: Flow rate: Medium temperature: Weight: Working pressure of the air motor: Working pressure at working rpm: Air consumption: Sense of rotation: Length: Width: Height: Permissible recoil force without body support: Permissible recoil force with body support:
9.871-291.0
max. 3000 bar
max. 25 l/min
max. +50 °C
approx. 5,50 kg
6,5 bar
0,16 kW 2500 1/min
0,4 m³/min at 6,5 bar
Clockwise in jet direction
approx. 800 mm
approx. 56 mm
approx. 200 mm
max. 150 N
max. 250 N
M1
4 x
1, 5
1 1/8 – 12UNF
Connection for air supply KS ¼”
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 68
HP 3000 RL-E-EXI - Components
Nozzle carrier head Weight
Material No. Number of nozzle form
21
Typ-bar kg
9.886-774.0 2 E02-3000 0,45
9.886-775.0 3 E03-3000 0,45
9.886-772.0 3 or 6 E05-3000 0,47
9.886-773.0 3 or 6 E09-3000 0,85
9.886-645.0 3 or 6 E24-3000 0,85
Body support Mat.-No: 6.025-301.0 Weight: 0,73 kg
Turnable hose connection 9/16” UNF-LH Material -No.: 9.872-640.0 Weight: 0,9 kg
Hose connection 9/16” UNF-LH Material -No.: 9.872-023.0 Weight: 0,2 kg
Nozzle carrier head E02 – 3000 Spraying angle: 20°
Nozzle carrier head E03 – 3000 Spraying angle: 30°
Nozzle carrier head E05 – 3000 Spraying angle: 20°, 24°
Nozzle carrier head E09 – 3000 Spraying angle: 20°, 24°
Nozzle carrier head E24 – 3000 Spraying angle: 30°
Operating information: The air motor is only to be used with dry, clean and lubricated air. Only fill up with pneumatic oil WOMA PN 9.890-539.0 – viscosity class ISO VG 46 –. The max. permitted air pressure of 6,5 bar has not to be exceeded.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 69
3.1.9 HP 3000 RL-RC M14 x 1,5
Connection for air supply KS ¼“
1 1/8 – 12UNF
Description:
The HP 3000RL – RC is a high-pressure jetting gun equipped with a pneumatically driven rotary-lead-through and a radio remote control with safety function which was specially designed for the professional and safe work with high-pressure units.
The composition of HP-gun and nozzle carrier head represents a highly efficient water tool, which guarantees – depending on the rotation of the nozzle carrier head – a high surface treatment/cleaning rate.
The system consists of the high-pressure gun with built-in transmitter, the receiver „Reflektomat“, which is connected to the high-pressure unit by means of a cable, as well as two batteries and a battery charger. The equipment includes a safety lock, as well as a hand grip made of plastic and a pressure housing made of forged steel.
Radio technique:
Radio technique not subject to registration and non-chargeable in all EC countries and in Switzerland, other countries on request.
Special receiving procedure to avoid radio interferences dependent on reflection. Specially suited for operation in halls, tunnels, in city centres and densely built-up areas.
Special characteristics:
Rotational speed adjustable by air pressure and
quantity
Low weight
Compact design with small dimensions
Optimum running qualities
Parts under pressure made of high-tensile stainless
steel
Turnable hand grip for easy handling
All moving parts are protected from dirt and water
invasion
Technical Data: Material-No.: Operating pressure: Flow rate: Medium temperature: Weight: Working pressure of the air motor: Working pressure at working rpm: Air consumption: Sense of rotation: Length: Width: Height: Permissible recoil force without body support:
Permissible recoil force with body support:
9.893-634.0
max. 3000 bar
max. 25 l/min
max. +50 °C
approx. 5,50 kg
6,5 bar
0,16 kW 2500 1/min
0,4 m³/min at 6,5 bar
Clockwise in jet direction
approx. 800 mm
approx. 56 mm
approx. 200 mm
max. 150 N
max. 250 N
Exhaust air
Receiver „Reflektomat“ Turbodüse TD1000 bzw. TD2000 siehe Produktblätter Z-147 bzw. Z-148
Magnetic holding Turbodüse TD1000 bzw. TD2000 siehe Produktblätter Z-147 bzw. Z-148
Connection to Hp unit
Turbodüse TD1000 bzw. TD2000
siehe Produktblätter Z-147 bzw. Z-148
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 70
HP 3000 RL-RC - Components
Nozzle carrier head Weight
Material-No. Number of nozzle form
21 LL
Typ-bar kg
9.886-774.0 2 E02-3000 0,45
9.886-775.0 3 E03-3000 0,45
9.886-772.0 3 or 6 E05-3000 0,47
9.886-773.0 3 or 6 E09-3000 0,85
9.886-645.0 3 or 6 E24-3000 0,85
Operating information: The air motor is only to be used with dry, clean and lubricated air. Only fill up with pneumatic oil WOMA MN 9.890-539.0 – viscosity class ISO VG 46 –. The max. permitted air pressure of 6,5 bar has not to be exceeded.
Radio technique characteristics:
Permission-free frequency in 70 cm volume
Capacity of transmitter: 10 mW
Range: approx. 300 m
Supply voltage: 7,2 V changeable battery
Battery charger: 115/230V AC
Receiver degree of protection: IP65
Voltageless potential-free relay contacts
Supply voltage: 12/24 V DC
Body support Mat.-No: 6.025-301.0 Weight: 0,73 kg
Nozzle carrier head E02 – 3000 Spraying angle: 20°
Nozzle carrier head E03 – 3000 Spraying angle: 30°
Nozzle carrier head E09 – 3000 Spraying angle: 20°, 24°
Nozzle carrier head E05 – 3000 Spraying angle: 20°, 24°
Nozzle carrier head E24 – 3000 Spraying angle: 30°
Turnable hose connection 9/16” UNF-LH Material -No.: 9.872-640.0 Weight: 0,9 kg
Hose connection 9/16” UNF-LH Material -No.: 9.872-023.0 Weight: 0,2 kg
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 71
¾“ – 16UNF M22x1,5
3.1.10 UWP 3000
Description: Die UWP 3000 is an underwater gun with recoil compensation for an allowable operating pressure of 3000 bar. The flat jet nozzle form 8 (compensation nozzle) compensates the recoil forces.
Standard equipment includes: A trigger safety guard and latching trigger lock to prevent unintentional use, forged steel pressure housing and light weight polymerized hand grip. Advantages: High safety standard. All functional parts are protected from water invasion. With the conversion kit (Material – No.: 9.914-022.0) guns type HP 3000-VDG can be converted to UWP 3000.
Technical data: Material-No.: 9.913-882.0 Operating pressure: max. 3000 bar Medium temperature: max. +100°C Weight: approx. 8,6kg Length: approx. 2621mm Height: approx. 305 mm Width: approx. 72 mm As compensating nozzle a flat jet nozzle form 8 min. 20˚ jet angle must be used.
Kompensationsdüse
High pressure nozzle Form 1
Compensation nozzle Form 8
HP 3000-VDG
High pressure connection 1 1/8 – 12 UNF
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 72
560 m
m
630 m
m
551 m
m
UWP 3000 - Components
HP 3000-VDG
High pressure nozzle Form 1
Compensating nozzle flat jet nozzle form 8 min. 20˚ jet angle
Turnable hose connection 9/16” UNF-LH Mat. -No.: 9.872-640.0 Weight: 0,9 kg
Hose connection 9/16” UNF-LH Mat.-No.: 9.872-023.0 Weight: 0,2 kg
Bypass hose Mat.-No.: 9.887-970.0 Weight: 0,6 kg Length: 1,5 m
UWP 3000 Material-No.: 9.913-882.0
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 73
3.2 TURNABLE HOSE CONNECTION
3.2.1 DSA 3000
Description:
The turnable hose connection is a high-performance rotary lead through which can be connected directly to WOMA guns type HP3000. The turnable hose connection prevents loops from forming at the high-pressure hose during operating, which makes operation safer and more comfortable.
Advantages: No loop formation at the high-pressure hose
All parts subject to pressure are made of high-tensile stainless steel
All functional parts are protected from dirt and water invasion.
Technical data:
Type: DSA3000
DN5 DSA 3000
DN5/8
Material-No.: 9.872-639.0 9.872-640.0
Operating pressure: 3000 bar
Flow rate: 40 l/min
Medium temperature: max. +100 °C
Total length LG : approx.
147 mm 157 mm
Insertion length LE : approx.
117 mm 127 mm
P: 3/8 – 24UNF-LH 9/16 –18UN-LH
A: 1 1/8 – 12 UNF 1 1/8 – 2UNF
Weight: approx . 0,7 kg
P A
3
9 m
m
LG
LE
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 74
3.3 HOSE LINES 3.3.1 Up to 3010 bar
3.3.1.1 DN8-HST6K-9/16UNF-LH
Betriebsdruck
Operating pressure
Prüfdruck
Test pressure
Verwendung für
To use for
:
:
:
:
:
max. 3010
max. 43645
4515
65470
Alle WOMA-Produkte
All WOMA products
bar
psi
bar
psi
Aufbau :
Schlauchseele aus Polyoxymethylen Druckträger aus sechs Drahtlagen Oberdecke aus Polyamid, rot Temperaturbereich: -10°C bis +70°C
Construction:
Polyoxmethylene inner tube 6 wire reinforcement Cover of Polyamide, rot Operating temperature range: -10°C to +70°C
Schlauchleitungen Hose tubes
Schlauchmeterware Hose per metre
Material-Nr.
Material-No.
Nennlänge
Nominal length
L = m
Gewicht
Weight
kg
Gewinde
Thread
A
Innendurch- messer
Inner diameter
mm
Außen-durchmesser
Outer diameter
mm
Biege-radius
Bend radius
mm
Gewicht
Weight
kg/m
max. Lieferlänge
max. delivery length
m
9.915-135.0 2 2,5
9/16-18
UNF-LH
9.915-136.0 5 5,0
9.915-137.0 10 9,1 7,8 17,3 230 0,83 300
9.915-138.0 20 17,4
9.915-139.0 40 34,0
Befestigungselemente für Schlauchstrümpfe siehe Produktblatt Z-025 Restraining attachment for strain relief devices see product sheet Z-025 Schlauchleitungen mit Schutzschlauch siehe Produktblatt S-008-3010-9/16-S Hose tubes with protective hose see product sheet S-008-3010-9/16-S
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 75
3.3.1.2 DN8-HST6K-9/16UNF-LH-S
Betriebsdruck
Operating pressure
Prüfdruck
Test pressure
Verwendung für
To use for
:
:
:
:
:
max. 3010
max. 43645
4515
65470
Alle WOMA-Produkte
All WOMA products
bar
psi
bar
psi
Aufbau :
Schlauchseele aus Polyoxymethylen Druckträger aus sechs Drahtlagen Oberdecke aus Polyamid, rot Temperaturbereich: -10°C bis +70°C
Construction:
Polyoxmethylene inner tube 6 wire reinforcement Cover of Polyamide, rot Operating temperature range: -10°C to +70°C
Schlauchleitungen Hose tubes
Schlauchmeterware Hose per metre
Material-Nr.
Material-No.
Nennlänge
Nominal length
L = m
Gewicht
Weight
kg
Gewinde
Thread
A
Innendurch- messer
Inner diameter
mm
Außen-durchmesser
Outer diameter
mm
Biege-radius
Bend radius
mm
Gewicht
Weight
kg/m
max. Lieferlänge
max. delivery length
m
9.915-143.0 10 12,1 9/16-18
UNF-LH
9.915-144.0 20 23,4 7,8 17,3 230 0,83 300
9.915-145.0 40 46,0
Befestigungselemente für Schlauchstrümpfe siehe Produktblatt Z-025 Restraining attachment for strain relief devices see product sheet Z-025 Schlauchleitungen ohne Schutzschlauch siehe Produktblatt S-008-3010-9/16 Hose tubes without protective hose see product sheet S-008-30100-9/16
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 76
3.3.1.3 DN5-HST6K-9/16UNF-LH
Betriebsdruck
Operating pressure
Prüfdruck
Test pressure
Verwendung für
To use for
:
:
:
:
:
max. 3010
max. 43645
4515
65470
Alle WOMA-Produkte
All WOMA products
bar
psi
bar
psi
Aufbau :
Schlauchseele aus Polyoxymethylen Druckträger aus sechs Drahtlagen Oberdecke aus Polyamid, blau Temperaturbereich: -10°C bis +70°C
Construction:
Polyoxmethylene inner tube 6 wire reinforcement Cover of Polyamide, blue Operating temperature range: -10°C to +70°C
Schlauchleitungen Hose tubes
Schlauchmeterware Hose per metre
Material-Nr.
Material-No.
Nennlänge
Nominal length
L = m
Gewicht
Weight
kg
Gewinde
Thread
A
Innendurch- messer
Inner diameter
mm
Außendurch-messer
Outer diameter
mm
Biege-radius
Bend radius
mm
Gewicht
Weight
kg/m
max. Lieferlänge
max. delivery length
m
9.915-150.0 5 3,0 9/16-18
UNF-LH
9.915-151.0 10 5,3 4,8 13,3 200 0,47 300
9.915-152.0 20 10,0
Befestigungselemente für Schlauchstrümpfe siehe Produktblatt Z-025 Restraining attachment for strain relief devices see product sheet Z-025
Schlauchleitungen mit Schutzschlauch siehe Produktblatt S-005-3010-9/16-S Hose tubes with protective hose see product sheet S-005-3010-9/16-S
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 77
3.3.1.4 DN5-HST6K-9/16UNF-LH-S
Betriebsdruck
Operating pressure
Prüfdruck
Test pressure
Verwendung für
To use for
:
:
:
:
:
max. 3010
max. 43645
4515
65470
Alle WOMA-Produkte
All WOMA products
bar
psi
bar
psi
Aufbau :
Schlauchseele aus Polyoxymethylen Druckträger aus sechs Drahtlagen Oberdecke aus Polyamid, blau Temperaturbereich: -10°C bis +70°C
Construction:
Polyoxmethylene inner tube 6 wire reinforcement Cover of Polyamide, blue Operating temperature range: -10°C to +70°C
Schlauchleitungen Hose tubes
Schlauchmeterware Hose per metre
Material-Nr.
Material-No.
Nennlänge
Nominal length
L = m
Gewicht
Weight
kg
Gewinde
Thread
A
Innendurch- messer
Inner diameter
mm
Außen-durchmesser
Outer diameter
mm
Biege-radius
Bend radius
mm
Gewicht
Weight
kg/m
max. Lieferlänge
max. delivery length
m
9.915-155.0 5 4,0 9/16-18
UNF-LH
9.915-156.0 10 7,3 4,8 13,3 200 0,47 300
9.915-157.0 20 14,0
Befestigungselemente für Schlauchstrümpfe siehe Produktblatt Z-025 Restraining attachment for strain relief devices see product sheet Z-025 Schlauchleitungen ohne Schutzschlauch siehe Produktblatt S-005-3010-9/16 Hose tubes without protective hose see product sheet S-005-3010-9/16
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 78
3.3.1.5 Hose connector 9/16 LH
DN 5 – HST6K – 9/16 LH 1 2 3
Hose connector Material: Stainless steel
Montagehinweise Mounting Instructions Druckkörper, z.B Schlauchverbinder, Druckflansche, Pistolenanschluss etc. Pressure body, e.g. hose connector, pressure flanges, gun connection etc. Ein bis zwei Gewindegänge müssen sichtbar sein One to two threads must be visible Druckring Druckschraube Schlauchnippel/Rohr Pressure ring Pressure screw Hose nipple/pipe
Druckschraube auf den Schlauchnippel/das Rohrende schieben. Slide the pressure screw on to the hose nipple/end of the pipe.
Druckring so weit aufschrauben, bis ein bis zwei Gewindegänge hinter dem Dichtkegel sichtbar sind. Screw the pressure ring on to the pipe until one to two threads are to be seen behind the sealing cone.
Gewinde der Druckschraube mit Anti-Seize-Montagepaste (Material-Nr. 9.892-362.0) bestreichen. Lubricate the thread of the pressure screw with anti-seize mounting paste (Material-No. 9.892-362.0).
Druckschraube über den Druckring schieben und in den Druckkörper einschrauben. Slip the pressure screw over the pressure ring and screw it into the pressure body.
Druckschraube mit Drehmoment anziehen (siehe Tabelle). Tighten pressure screw with tightening torque (see table).
Verbindung kompl.
Connection cpl. d
HP Rohr AD Pipe AD
Max. Betriebsdru
ck Max.
Operating pressure
Abmessungen in mm Dimensions in mm
1
Körper Verbindung Connector
body
2
Druck- schraube Pressure
screw
3
Druckring
Pressure ring
2
Dreh-moment
Torque
Material-Nr. Material-No.
mm Zoll inch
mm bar C SW HEX
Nm
9.883-668.0
9/16-18 UNF LH
5 9/16 14,30 4000 56 32 9.884-059.0
i 1 1/8-12
UNF
9.883-669.0
1 1/8-12
UNF
9.883-670.0
9/16-18 UNF LH
160
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 79
4 WATER TOOLS 4.1 ORBIMASTER
4.1.1 Orbimaster 500 Description: The Orbimaster combines the high power of a straight jet with the large area coverage of a fan jet.
Advantages: Large area coverage using orbital motion of the water jet.
Rotor and seat made of hard metal, housing made of high-strength stainless steel.
Easy rotor change.
Usable with hot water systems up to 100° C.
Simple operation.
Self-orbiting.
Low weight.
Accessories optional: Connecting adapter to high pressure gun models HP750-2 Material-No.: 9.872-159.0
Technical data: Operating pressure: max. 500 bar Medium temperature: max. +100°C Weight: appr. 0,74kg Material-No. and dimensions page 2 Performance Chart page 3
Example: Concrete refurbishment
High-pressure connection 9/16-18 UNF-LH
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 80
Material-No. and dimensions Accessories for Orbimaster Special tool for rotor seat (Material-No.: 6.025-233.0).
Orbimaster Rotor Spare rotor 500 diameter
mm with seat
Material-No.: Material-No.:
9.910-938.0 0,90
9.886-678.0 1,14
9.886-679.0 1,19 9.884-146.0
9.913-706.0 1,29
9.886-680.0 1,35 9.884-147.0
9.886-681.0 1,42 9.884-148.0
9.910-939.0 1,47
9.886-682.0 1,52 9.884-149.0
9.910-940.0 1,62 9.884-150.0
9.910-941.0 1,65
9.886-683.0 1,70
9.886-684.0 1,80 9.884-151.0
9.886-685.0 1,90 9.911-409.0
9.886-686.0 2,00
9.886-687.0 2,12 9.884-153.0
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 81
Performance Chart
Orbimaster Operating pressure - bar
Rotor
mm Mat.-No.:
150 200 250 300 350 400 450 500 100
Flow rate - l/min Recoil force in jetting direction -N*
0,90
9.910-938.0
4,6
11
5,6
16
6,5
21
7,3
27
8,0
32
8,6
38
9,2
43
9,8
48 10,3
54
1,14
9.886-678.0
7,8
18
9,6
27
11,0
36
12,3
46
13,5
55
14,6
64
15,6
73
16,5
82
17,4
91
1,19
9.886-679.0
9,1
21
11'1 32
12,9
42
14,4
53
15,8
64
17,0
74
18,2
85
19,3
96
20,3
106
1,29
9.913-706.0
10,3
24
12,6
36
14,6
48
16,3
60
17,8
72
19,3
84
20,6
96
21,8
108
23,0
120
1,35
9.886-680.0
11,2
26
13,7
39
15,8
52
17,7
65
19,4
78
21,0
92
22,4
105
23,8
118
25,0
131
1,42
9.886-681.0
12,8
30
15,7
45
18,1
60
20,2
75
22,2
90
23,9
105
25,6
120
27,2
134
28,6
149
1,47
9.910-939.0
13,7
32.
16,8
48
19,4
64
21,7
80
23,7
96
25,6
112
27,4
128
29,1
144
30,6
160
1,52
9.886-682.0
14,8
35
18,1
52
20,9
69
23,4
86
25,6
104
27,7
121
29,6
138
31,4
155 33,1
173
1,62
9.910-940.0
16,0
37
19,6
56
22,6
75
25,3
93
27,7
112
29,9
131
32,0
149
33,9
168
35,8
187
1,65
9.910-941.0
17,0
40
20,8
60
24,0
79 26,9
99
29,4
119
31,8
139
34,0
159
36,1
179
38,0
198
1,70
9.886-683.0
18,2
42
22,3
64
25,7
85
28,8
106
31,5
127
34,0
149
36,4
170
38,6
191
40,7
212
1,80
9.886-684.0
19,2
45
23,5
67
27,2
90
30,4
112
33,3
134
35,9
157
38,4
179 40,7
202
42,9
224
1,90 9.886-685.0
22,8
53
27,9
80
32,2
106 36,0
133
39,5
160
42,7
186 45,6
213
48,4
240
51,0
266
2,0
9.886-686.0
25,0
58
30,6
88
35,4
117
39,5
146
43,3
175
46,8
204
50,0
233
53,0
263
55,9
292
2,12 9.886-687.0
27,2
63
33,3
95 38,5
127
43,0
159
47,1
190
50,9
222
54,4
254
57,7
286
60,8
317
*In case of recoil force > 150 N the jetting device must be equipped with a body support..
*The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 82
4.1.2 Orbimaster 800 Description: The Orbimaster combines the high power of a straight jet with the large area coverage of a fan jet.
Advantages:
Large area coverage using orbital motion of the water jet. Rotor and seat made of hard metal, housing made of high-strength stainless steel. Easy rotor change. Usable with hot water systems up to 100° C. Self-orbiting. Low weight.
Accessories optional: Connecting adapter to high pressure gun models HP750-2 Material-No.: 9.872-159.0
Technical data: Operating pressure: max. 800 bar Medium temperature: max. +100°C Weight: appr. 0,63kg Material-No. and dimensions page 2 Performance Chart pages 3/4
Example: Concrete refurbishment
High-pressure connection 9/16-18 UNF-LH
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 83
Material-No. and dimensions
Accessories for Orbimaster Special tool for rotor seat (Material-No.: 6.025-233.0).
Orbimaster Rotor Spare rotor 800 diameter
mm with seat
Material-No.: Material-No.:
9.910-945.0 1,00 9.884-069.0
9.886-693.0 1,05 9.884-070.0
9.912-614.0 1,10 9.912-619.0
9.886-694.0 1,15 9.884-071.0
9.886-695.0 1,20 9.912-620.0
9.910-946.0 1,25 9.884-072.0
9.886-696.0 1,30 9.884-073.0
9.912-615.0 1,35 9.912-621.0
9.886-697.0 1,40 9.884-074.0
9.886-698.0 1,45 9.884-075.0
9.886-699.0 1,50 9.884-076.0
9.886-700.0 1,55 9.884-077.0
9.886-701.0 1,60 9.884-078.0
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 84
Performance Chart
Orbimaster Operating pressure - bar
Rotor
mm Mat.-No.:
200
250 300 350 400 450 500 550 600 650 700
750 800
Flow rate - l/min Recoil force in jetting direction -N*
0,60
3,0 3,4 3,7 4,0 4,3 4,5 4,8 5,0 5,2 5,4 5,6 5,8 6,0
10 12 15 17 20 22 25 27 30 32 35 37 40
0,65
3,5 4,0 4,3 4,7 5,0 5,3 5,6 5,9 6,1 6,4 6,6 6,9 7,1
12 15 18 20 23 26 29 32 35 38 41 44 47
0,70
4,1 4,6 5,0 5,4 5,8 6,2 6,5 6,8 7,1 7,4 7,7 8,0 8,2
14 17 20 24 27 31 34 37 41 44 47 51 54
0,75
4,7 5,3 5,8 6,2 6,7 7,1 7,5 7,8 8,2 8,5 8,8 9,1 9,4
16 19 23 27 31 35 39 43 47 51 55 58 62
0,80
5,4 6,0 6,6 7,1 7,6 8,1 8,5 8,9 9,3 9,7 10,0 10,4 10,7
18 22 27 31 35 40 44 49 53 58 62 66 71
0,85
6,1 6,8 7,4 8,0 8,6 9,1 9,6 10,1 10,5 10,9 11,3 11,7 12,1
20 25 30 35 40 45 50 55 60 65 70 75 80
0,90
6,8 7,6 8,3 9,0 9,6 10,2 10,7 11,3 11,8 12,2 12,7 13,2 13,6
22 28 34 39 45 50 56 62 67 73 79 84 90
0,95
7,6 8,5 9,3 10,0 10,7 11,4 12,0 12,6 13,1 13,6 14,2 14,7 15,1
25 31 37 44 50 56 62 69 75 81 87 94 100
1,00 9.910-945.0
8,4 9,4 10,3 11'1 11,9 12,6 13,3 13,9 14,5 15,1 15,7 16,2 16,8
28 35 42 48 55 62 69 76 83 90 97 104 111
1,05 9.886-693.0
9,2 10,3 11,3 12,2 13,1 13,9 14,6 15,3 16,0 16,7 17,3 17,9 18,5
31 38 46 53 61 69 76 84 92 99 107 114 122
110 9.912-614.0
0,1 11,3 12,4 13,4 14,4 15,2 16,0 16,8 17,6 18,3 19,0 19,7 20,3
34 42 50 59 67 75 84 92 101 109 117 126 134
1,15 9.886-694.0
11'1 12,4 13,6 14,7 15,7 16,6 17,5 18,4 19,2 20,0 20,8 21,5 137
22,2
37 46 55 64 73 82 92 101 110 119 128 147
1,20 9.886-695.0
2,1 13,5 14,8 16,0 17,1 18,1 19,1 20,0 20,9 21,8 22,6 23,4 24,2
40 50 60 70 80 90 100 110 120 130 140 150 160
1,25 9.910-946.0
3,1 14,7 16,1 17,3 18,5 19,7 20,7 21,7 22,7 23,6 24,5 25,4 26,2
43 54 65 76 87 97 108 119 130 141 151 162 173
1,30 9.886-696.0
14,2
47
15,8
59
17,4
70
18,8
82
20,0
94
21,3
105
22,4
117
23,5
129
24,6
140
25,6
152
26,5
164
27,5
176
28,4
187
1,35 9.912-615.0
5,3 50
17,1 63
18,7 76
20,2 88
21,6 101
22,9 114
24,2 126
25,4 139
26,5 151
27,6 164
28,6 177
29,6 189
30,6 202
1,40 9.886-697.0
16,4 18,4 20,1 21,7 23,3 24,7 26,0 27,3 28,5 29,6 30,8 31,8 32,9
54 68 81 95 109 122 136 149 163 176 190 204 217
1,45 9.886-698.0
7,6 19,7 21,6 23,3 24,9 26,5 27,9 29,2 30,5 31,8 33,0 34,2 35,3
58 73 87 102 116 131 146 160 175 189 204 218 233
*In case of recoil force > 150 N the jetting device must be equipped with a body support.
*The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 85
Performance Chart
Orbimaster Operating pressure - bar
Rotor
mm Mat.-No.:
200
250 300 350 400 450 500 550 600 650 700
750 800
Flow rate - l/min Recoil force in jetting direction -N*
1,50 9.886-699.0
18,9 21'1 23,1 25,0 26,7 28,3 29,8 31,3 32,7 34,0 35,3 36,5 37,7
62 78 93 109 125 140 156 171 187 203 218 234 249
1,55 9.886-700.0
20,2 22,5 24,7 26,7 28,5 30,2 31,9 33,4 34,9 36,3 37,7 39,0 40,3
67 83 100 116 133 150 166 183 200 216 233 250 266
1,60 9.886-701.0
21,5 24,0 26,3 28,4 30,4 32,2 34,0 35,6 37,2 38,7 40,2 41,6 42,9
71 89 106 124 142 160 177 195 213 230 248 266 284
1,65
22,8 25,5 28,0 30,2 32,3 34,3 36,1 37,9 39,6 41,2 42,7 44,2 45,7
75 94 113 132 151 170 188 207 226 245 264 283 302
1,70
24,2 27,1 29,7 32,1 34,3 36,4 38,3 40,2 42,0 43,7 45,4 46,9 48,5
80 100 120 140 160 180 200 220 240 260 280 300 320
1,75 25,7 28,7 31,5 34,0 36,3 38,5 40,6 42,6 44,5 46,3 48,1 49,7 51,4
85 106 127 148 170 191 212 233 254 276 297 318 339
1,80 27,2 30,4 33,3 36,0 38,4 40,8 43,0 45,1 47,1 49,0 50,8 52,6 54,4
90 112 135 157 179 202 224 247 269 292 314 336 359
1,85 28,7 32,1 35,2 38,0 40,6 43,1 45,4 47,6 49,7 51,8 53,7 55,6 57,4
95 118 142 166 190 213 237 261 284 308 332 355 379
1,90 30,3 33,9 37,1 40,1 42,8 45,4 47,9 50,2 52,4 54,6 56,7 58,6 60,6
100 125 150 175 200 225 250 275 300 325 350 375 400
1,95 31,9 35,7 39,1 42,2 45,1 47,8 50,4 52,9 55,2 57,5 59,7 61,8 63,8
105 132 158 184 211 237 263 290 316 342 369 395 421
2,00 33,6 37,5 41'1 44,4 47,5 50,3 53,1 55,6 58,1 60,5 62,8 65,0 67,1
111 138 166 194 222 249 277 305 332 360 388 415 443
2,05 35,3 39,4 43,2 46,6 49,9 52,9 55,7 58,5 61 '1 63,6 66,0 68,3 70,5
116 145 175 204 233 262 291 320 349 378 407 436 466
2,10 37,0 41,4 45,3 48,9 52,3 55,5 58,5 61,3 64,1 66,7 69,2 71,6 74,0
122 153 183 214 244 275 305 336 366 397 427 458 489
2,15
38,8
128
43,4
160
47,5
192
51,3
224
54,8 256
58,2
288
61,3
320
64,3
352
67,2
384
69,9
416
72,5
448
75,1
480 77,5
512
2,20
40,6 134
45,4
168
49,7
201
53,7 235
57,4
268 60,9
302
64,2
335
67,3
369
70,3 402
73,2 436
76,0
469 78,6
503
81,2
536
2,40 48,3
160 54,0
199
59,2
239
63,9
279 68,3
319
72,5
359
76,4
399
80,1
439
83,7
479
87,1
518
90,4
558
93,6
598
96,6
638
2,60
56,7
187 63,4
234
69,4 281
75,0
328
80,2
374
85,1
421
89,7
468
94,0
515
98,2
562
102,2
608
106,1
655 109,8
702
113,4
749
2,80 65,8 73,5 80,5 87,0 93,0 98,6 104,0 109,1 113,9 118,6 123,0 127,4 131,5
217 271 326 380 434 489 543 597 651 706 760 814 868
*In case of recoil force > 150 N the jetting device must be equipped with a body support.
*The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 86
4.1.3 Orbimaster 1500 Description:
The Orbimaster combines the high power of a straight jet with the large area coverage of a fan jet. The Orbimaster can be mounted with certified high pressure connections on lances, guns and robots.
Advantages:
Large area coverage using orbital motion of the water jet. Rotor and seat made of hard metal, housing made of high-strength stainless steel. Easy rotor change. Usable with hot water systems up to 100° C. Self-orbiting. Low weight.
Accessories optional: Connecting adapter to high pressure gun models HP750 Material-No.: 9.872-159.0.
Technical data:
Operating pressure: Medium temperature: Weight:
max. 1500 bar
max. +100°C
approx.1,21 kg
High-pressure connection 9/16-18 UNF-LH
Example: Concrete restoration
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 87
Material-No. and dimensions
Accessories for Orbimaster Special tool for rotor seat (Material-No.: 6.025-233.0). *Protecting cap plastic (Material-No.: 9.884-060.0). *Protecting cap aluminium (Material-No.: 9.909-438.0). (*recommended for concrete restoration)
Orbimaster Rotor Spare rotor 1500 diameter
mm with seat
Material-No.: Material-No.:
9.886-726.0 0,85 9.884-067.0
9.912-616.0 0,90 9.912-618.0
9.886-665.0 0,95 9.884-068.0
9.886-666.0 1,00 9.884-069.0
9.886-667.0 1,05 9.884-070.0
9.909-604.0 1,10 6.025-226.0
9.886-669.0 1,15 9.884-071.0
9.912-613.0 1,20 9.912-620.0
9.886-727.0 1,25 9.884-072.0
9.886-728.0 1,30 9.884-073.0
9.886-729.0 1,35 6.025-224.0
9.886-730.0 1,40 9.884-074.0
9.886-731.0 1,95 9.884-156.0
9.910-542.0 2,05 9.910-537.0
9.886-758.0 2,80 9.884-582.0
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 88
Performance Chart
Orbimaster Operating pressure - bar
Rotor
mm Mat.-No.:
400
500 600 700 800 900 1000 1100 1200 1300 1400 1500
Flow rate - l/min Recoil force in jetting direction -N*
0,70
5,8 6,5 7,1 7,7 8,2 8,7 9,2 9,6 10,1 10,5 10,9 11,3
27 34 41 47 54 61 68 75 81 88 95 102
0,75
6,7 7,5 8,2 8,8 9,4 10,0 10,6 11,1 11,6 12,0 12,5 12,9
31 39 47 55 62 70 78 86 93 101 109 117
0,80
7,6 8,5 9,3 10,0 10,7 11,4 12,0 12,6 13,2 13,7 14,2 14,7
35 44 53 62 71 80 89 97 106 115 124 133
0,85 9.886-726.0
8,6 9,6 10,5 11,3 12,1 12,9 13,6 14,2 14,8 15,5 16,0 16,6
40 50 60 70 80 90 100 110 120 130 140 150
0,90
9,6 10,7 11,8 12,7 13,6 14,4 15,2 15,9 16,6 17,3 18,0 18,6
45 56 67 79 90 101 112 123 135 146 157 168
0,95 9.886-665.0
10,7 12,0 13,1 14,2 15,1 16,1 16,9 17,8 18,5 19,3 20,0 20,7
50 62 75 87 100 112 125 137 150 162 175 187
1,00 9.886-666.0
11,9 13,3 14,5 15,7 16,8 17,8 18,8 19,7 20,5 21,4 22,2 23,0
55 69 83 97 111 125 138 152 166 180 194 208
1,05 9.886-667.0
13,1 14,6 16,0 17,3 18,5 19,6 20,7 21,7 22,7 23,6 24,5 25,3
61 76 92 107 122 137 153 168 183 198 214 229
1,10 9.909-604.0
14,4 16,0 17,6 19,0 20,3 21,5 22,7 23,8 24,9 25,9 26,9 27,8
67 84 101 117 134 151 168 184 201 218 235 251
1,15 9.886-669.0
15,7 17,5 19,2 20,8 22,2 23,5 24,8 26,0 27,2 28,3 29,4 30,4
73 92 110 128 147 165 183 201 220 238 256 275
1,20 9.912-613.0
17,1 19,1 20,9 22,6 24,2 25,6 27,0 28,3 29,6 30,8 32,0 33,1
80 100 120 140 160 179 199 219 239 259 279 299
1,25 9.886-727.0
18,5 20,7 22,7 24,5 26,2 27,8 29,3 30,7 32,1 33,4 34,7 35,9
87 108 130 151 173 195 216 238 260 281 303 325
1,30 9.886-728.0
20,0 22,4 24,6 26,5 28,4 30,1 31,7 33,2 34,7 36,1 37,5 38,8
94 117 140 164 187 211 234 257 281 304 328 351
1,35 9.886-729.0
21,6 24,2 26,5 28,6 30,6 32,4 34,2 35,9 37,4 39,0 40,4 41,9
101 126 151 177 202 227 252 278 303 328 353 379
1,40 9.886-730.0
23,3 26,0 28,5 30,8 32,9 34,9 36,8 38,6 40,3 41,9 43,5 45,0
109 136 163 190 217 244 271 299 326 353 380 407
1,45
24,9 27,9 30,5 33,0 35,3 37,4 39,4 41,4 43,2 45,0 46,7 48,3
116 146 175 204 233 262 291 320 349 378 408 437
1,50
26,7 29,8 32,7 35,3 37,7 40,0 42,2 44,3 46,2 48,1 49,9 51,7
125 156 187 218 249 280 312 343 374 405 436 467
1,55
28,5 31,9 34,9 37,7 40,3 42,8 45,1 47,3 49,4 51,4 53,3 55,2
133 166 200 233 266 299 333 366 399 432 466 499
*In case of recoil force > 150 N the jetting device must be equipped with a body support.
*The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 89
Performance chart
Orbimaster Operating pressure - bar
Rotor
mm Mat.-No.:
400
500 600 700 800 900 1000 1100 1200 1300 1400 1500
Flow rate - l/min Recoil force in jetting direction -N*
1,60
30,4 34,0 37,2 40,2 42,9 45,6 48,0 50,4 52,6 54,7 56,8 58,8
142 177 213 248 284 319 354 390 425 461 496 532
1,65
32,3 36,1 39,6 42,7 45,7 48,4 51,1 53,6 55,9 58,2 60,4 62,5
151 188 226 264 302 339 377 415 452 490 528 565
1,70
34,3 38,3 42,0 45,4 48,5 51,4 54,2 56,9 59,4 61,8 64,1 66,4
160 200 240 280 320 360 400 440 480 520 560 600
1,75
36,3 40,6 44,5 48,1 51,4 54,5 57,4 60,2 62,9 65,5 68,0 70,4
170 212 254 297 339 382 424 466 509 551 594 636
1,80
38,4 43,0 47,1 50,8 54,4 57,7 60,8 63,7 66,6 69,3 71,9 74,4
179 224 269 314 359 404 449 494 538 583 628 673
1,85
40,6 45,4 49,7 53,7 57,4 60,9 64,2 67,3 70,3 73,2 76,0 78,6
190 237 284 332 379 427 474 521 569 616 663 711
1,90
42,8 47,9 52,4 56,7 60,6 64,2 67,7 71,0 74,2 77,2 80,1 82,9
200 250 300 350 400 450 500 550 600 650 700 750
1,95 9.884-156.0
45,1 50,4 55,2 59,7 63,8 67,7 71,3 74,8 78,1 81,3 84,4 87,4
211 263 316 369 421 474 527 579 632 684 737 790
2,00
47,5 53,1 58,1 62,8 67,1 71,2 75,0 78,7 82,2 85,5 88,8 91,9
222 277 332 388 443 498 554 609 665 720 775 831
2,05 9.910-542.0
49,9 55,7 61,1 66,0 70,5 74,8 78,8 82,7 86,3 89,9 93,3 96,5
233 291 349 407 466 524 582 640 698 757 815 873
2,10
52,3 58,5 64,1 69,2 74,0 78,5 82,7 86,8 90,6 94,3 97,9 101,3
244 305 366 427 489 550 611 672 733 794 855 916
2,15
54,8 61,3 67,2 72,5 77,5 82,3 86,7 90,9 95,0 98,9 102,6 106,2
256 320 384 448 512 576 640 704 768 832 896 960
2,20
57,4 64,2 70,3 76,0 81,2 86,1 90,8 95,2 99,4 103,5 107,4 111,2
268 335 402 469 536 603 670 737 804 871 938 1005
2,40
68,3 76,4 83,7 90,4 96,6 102,5 108,0 113,3 118,4 123,2 127,8 132,3
319 399 479 558 638 718 798 877 957 1037 1117 1196
2,60
80,2 89,7 98,2 106,1 113,4 120,3 126,8 133,0 138,9 144,6 150,0 155,3
374 468 562 655 749 842 936 1030 1123 1217 1310 1404
2,80 9.886-758.0
93,0 104,0 113,9 123,0 131,5 139,5 147,1 154,2 161,1 167,7 174,0 180,1
434 543 651 760 868 977 1086 1194 1303 1411 1520 1628
*In case of recoil force > 150 N the jetting device must be equipped with a body support.
*The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 90
4.1.4 Orbimaster 2500 Description: The Orbimaster combines the high power of a straight jet with the large area coverage of a fan jet. The Orbimaster can be mounted with certified high pressure connections on lances, guns and robots.
Advantages:
Large area coverage using orbital motion of the water jet. Rotor and seat made of hard metal, housing made of high-strength stainless steel. Easy rotor change. Usable with hot water systems up to 100° C. Self-orbiting. Low weight.
Technical data: Operating pressure: Medium temperature: Weight: Material-No. and dimensions Performance Chart
max. 2500 bar
max.+100°C
approx.1,21kg
page 2
page 3/3
High-pressure connection 9/16-18 UNF-LH
Example: Concrete restoration
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 91
Material-No. and dimensions
Accessories for Orbimaster Special tool for rotor seat (Material-No.: 6.025-233.0). *Protecting cap plastic (Material-No.: 9.884-060.0). *Protecting cap aluminium (Material-No.: 9.909-438.0). (*recommended for concrete restoration)
Orbimaster Rotor Spare rotor 2500 diameter
mm with seat
Material-No.: Material-No.:
9.912-612.0 0,60 9.912-617.0
9.886-660.0 0,70 9.884-064.0
9.909-603.0 0,75 9.909-439.0
9.886-662.0 0,80 9.884-066.0
9.886-663.0 0,85 9.884-067.0
9.886-664.0 0,90 9.912-618.0
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 92
Performance Chart
Orbimaster Operating pressure - bar
Rotor
mm Mat.-No.:
1400
1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500
Flow rate - l/min Recoil force in jetting direction -N*
0,60
9.912-612.0
8,0
70
8,3
75
8,5
80
8,8
85
9,1
90
9,3
95
9,5
100
9,8
105
10,0
110
10,2
115
10,5
120
10,7
125
0,70
9.886-660.0
10,9
95
11,3
102
11,6
109
12,0
115
12,3
122
12,7
129
13,0
136
13,3
142
13,6
149
13,9
156
14,2
163
14,5
170
0,75
9.909-603.0
12,5 109
12,9 117
13,3 125
13,8 132
14,2 140
14,5 148
14,9 156
15,3 164
15,6 171
16,0 179
16,3 187
16,7 195
0,80
9.886-662.0 14,2
124
14,7
133
15,2
142
15,7
151
16,1
160
16,5
168
17,0
177
17,4
186
17,8
195
18,2
204
18,6
213
19,0
222
0,85
9.886-663.0
16,0 140
16,6 150
17,1 160
17,7 170
18,2 180
18,7 190
19,2 200
19,6 210
20,1 220
20,6 230
21,0 240
21,4 250
0,90 9.886-664.0
18,0
157
18,6
168
19,2
179
19,8
191
20,4
202
20,9
213
21,5
224
22,0
236
22,5
247
23,0
258
23,5
269
24,0
280
0,95 20,0 175
20,7 187
21,4 200
22,1 212
22,7 225
23,3 237
23,9 250
24,5 262
25,1 275
25,7 287
26,2 300
26,8 312
1,00
22,2
194
23,0
208
23,7
222
24,5
235
25,2
249
25,9
263
26,5
277
27,2
291
27,8
305
28,4
318
29,1
332
29,7
346
1,05 24,5 214
25,3 229
26,2 244
27,0 260
27,7 275
28,5 290
29,2 305
30,0 321
30,7 336
31,4 351
32,0 366
32,7 382
1,10
26,9 235
27,8 251
28,7 268
29,6 285
30,4 302
31,3 318
32,1 335
32,9 352
33,7 369
34,4 385
35,2 402
35,9 419
1,15 29,4 256
30,4 275
31,4 293
32,3 311
33,3 330
34,2 348
35,1 366
35,9 385
36,8 403
37,6 421
38,4 440
39,2 458
*In case of recoil force > 150 N the jetting device must be equipped with a body support.
*The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 93
4.2 TURBO NOZZLE
4.2.1 Turbo nozzle TD-3000-SCS
Description: The TD3000-SCS is a highly efficient water tool with a rotating nozzle carrier head, specially designed for surface preparation. The turbo nozzle has a continuous speed control. The main advantage of the turbo nozzle ist its high production rate. The turbo nozzle can be connected directly to gun barrels (9/16) of WOMA gun models HP750 through HP 3000 and nearly any gun available on the market.
Special characteristics:
Speed control
High efficiency due to leak free sealing system
Dirt resistance due to sealing systems
Low weight
Pressure conducting parts made of stainless steel
Long life time
Easy change of the nozzle carrier head and nozzles
Easy maintenance, field repairable Nozzle Form 21 S (S = Saphir) see product sheet D-21S-3000
Technical Data: Material-No.: Without nozzle carrier head
Operating pressure: Flow rate: Medium temperature: High pressure connection: Speed: Rotating direction: Weight without nozzle carrier head:
9.873-203.0
max.3000 bar
46 l/min
max.+95°C
9/16-18UNF-LH
750 – 4000 1/min
right
ca.1,3kg
Protective disc Nozzle carrier head Rotary joint Protective tube Adjusting hood for continuous speed control
7
5 m
m
226 mm
Hig
h p
ressure
connectio
n
9/1
6“
– 1
8U
NF
LH
Suitable nozzles: Form 21 S Accessories: Thrust collar for high pressure connection M14 x 1,5 LH Material-Nr.: 9.883-493.0
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 94
NOZZLE SELECTION TABLE FOR NOZZLE CARRIER HEAD TD06-3000 - 30° Example: Operating pressure: 1500 bar Flow rate: 25 l/min Inner circle (circle 1): 3 x Nozzles F21-Saphir ø 0,6 mm Outer circle (circle 2): 3 x Nozzles F21-Saphir ø 0,35 mm
Nozzle carrier head TD06 kpl. Mat.-Nr.: 9.886-875.0 Weight: 0,7 kg
3 Nozzles 3 Nozzles
Guard plate for TD06 Mat.-Nr.: 9.877-572.0
Hexagonal head screw Mat.-Nr.: 9.880-195.0
Spring pin Mat.-Nr.: 9.880-641.0
Flow insert Mat.-Nr.: 9.877-683.0
Sphere Mat.-Nr.: 9.883-371.0
Nozzle carrier headTD06 Mat.-Nr.: 9.876-917.0
Threaded pin Mat.-Nr.: 9.881-012.0
Circle 1
Circle 2
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 95
The recoil forces at hand-held jetting devices must never exceed 250 N in the longitudinal axis. In case of recoil forces > 150 N the hand-held jetting devices (guns, lances) must be equipped with a body support!
TD 06 Operating pressure (bar) 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 Nozzle-ø Circle 1 (mm)
Dummy nozzle Nozzle-ø Circle 2 (mm) 0,95 0,9 0,85 0,8 0,75 0,7 0,65 0,65 0,6 0,6 0,55 0,55 0,55 0,5 0,5 0,5 0,45 0,45 0,45 0,45 0,4 0,4 0,4
Flow rate (l/min) 26,6 26,2 25,2 23,9 22,3 20,5 18,5 19,3 17,1 17,8 15,5 16 16,5 14 14,4 14,8 12,5 12,8 13,1 13,4 11,2 11,4 11,6 Recoil force (N) 136 146 152 154 152 147 140 152 141 151 136 145 155 135 143 150 134 140 146 152 135 139 144
0,2 Nozzle-ø Circle 2 (mm) 1 0,95 0,9 0,8 0,75 0,7 0,65 0,6 0,6 0,55 0,55 0,55 0,5 0,5 0,5 0,45 0,45 0,45 0,45 0,4 0,4 0,4 0,4
Flow rate (l/min) 30,7 27,8 27,5 23,7 22,5 21 20,2 18,3 19 16,9 17,5 18,1 15,8 16,2 16,7 14,3 14,7 15 15,4 13,2 13,5 13,7 14
Recoil force (N) 156 141 153 143 145 143 153 144 156 144 154 165 148 157 166 146 153 160 168 150 156 162 168
0,25 Nozzle-ø Circle 2 (mm) 0,95 0,9 0,8 0,75 0,7 0,65 0,65 0,6 0,6 0,55 0,55 0,5 0,5 0,5 0,45 0,45 0,45 0,45 0,4 0,4 0,4 0,4 0,35 0,35
Flow rate (l/min) 28,5 28,2 24,5 23,3 21,9 20,2 21,2 19,3 20,1 18 18,7 16,5 17 17,5 15,2 15,6 16 16,4 14,1 14,4 14,7 15 13,1 13,4 Recoil force (N) 145 157 148 150 149 146 160 152 165 153 164 150 160 169 151 159 167 175 154 160 167 174 161 167
0,3 Nozzle-ø Circle 2 (mm) 0,95 0,85 0,8 0,75 0,7 0,65 0,65 0,6 0,55 0,55 0,5 0,5 0,5 0,45 0,45 0,45 0,4 0,4 0,4 0,35 0,35 0,35 0,35 0,35
Flow rate (l/min) 29,3 26,3 25,5 24,4 23 21,4 22,4 20,6 18,7 19,4 17,4 18 18,5 16,4 16,8 17,3 15,5 15,8 16,2 14,3 14,6 14,8 15,1 15,4 Recoil force (N) 149 147 154 157 157 154 169 162 153 165 153 163 174 158 167 176 165 173 180 166 172 179 185 192
0,35 Nozzle-ø Circle 2 (mm) 0,95 0,85 0,8 0,75 0,7 0,65 0,6 0,6 0,55 0,55 0,5 0,5 0,45 0,45 0,45 0,4 0,4 0,4 0,35 0,35 0,35 0,35 0,3 0,3 0,3
Flow rate (l/min) 30,2 27,3 26,6 25,6 24,2 22,7 21,1 22,1 20,2 21 19 19,7 17,7 18,2 18,7 16,7 17,1 17,5 15,8 16,2 16,5 16,8 14,8 15,1 15,4 Recoil force (N) 154 152 160 165 166 164 159 174 166 179 168 179 166 176 186 170 178 187 177 184 191 199 179 185 191
0,4 Nozzle-ø Circle 2 (mm) 0,95 0,85 0,75 0,7 0,65 0,65 0,6 0,55 0,55 0,5 0,5 0,45 0,45 0,45 0,4 0,4 0,4 0,35 0,35 0,35 0,3 0,3 0,3 0,3 0,3 0,25
Flow rate (l/min) 31,4 28,5 25,2 24,3 23,1 24,3 22,8 21,1 22 20,2 21 19,1 19,7 20,3 18,4 18,9 19,3 17,5 17,9 18,3 16,5 16,8 17,1 17,5 17,8 16
Recoil force (N) 160 159 152 156 158 172 172 166 181 172 185 174 185 196 183 192 202 187 195 204 188 195 202 210 218 201
0,45 Nozzle-ø Circle 2 (mm) 0,95 0,85 0,75 0,7 0,65 0,6 0,55 0,55 0,5 0,5 0,45 0,45 0,4 0,4 0,4 0,35 0,35 0,35 0,3 0,3 0,3 0,25 0,25 0,25 0,25 0,2
Flow rate (l/min) 32,6 29,9 26,7 25,8 24,4 23,5 22,1 23 21,5 22,3 20,7 21,4 19,7 20,3 20,9 19,2 19,7 20,1 18,5 18,9 19,3 17,8 18,2 18,5 18,8 17,5 Recoil force (N) 166 167 161 166 169 169 167 182 177 190 183 195 185 196 207 195 205 215 202 211 220 207 215 223 231 218
0,5 Nozzle-ø Circle 2 (mm) 0,9 0,8 0,75 0,7 0,65 0,6 0,55 0,5 0,5 0,45 0,45 0,4 0,4 0,35 0,35 0,3 0,3 0,3 0,25 0,25 0,25 0,2 0,2 0,2 0,2
Flow rate (l/min) 31,3 28,8 28,4 27,6 26,6 25,5 24,2 22,9 23,8 22,3 23,1 21,6 22,3 20,9 21,4 20 20,6 21 19,8 20,2 20,6 19,5 19,9 20,2 20,6
Recoil force (N) 159 160 171 178 182 183 182 180 195 190 204 197 209 201 217 204 214 225 216 225 235 227 235 244 253
0,55 Nozzle-ø Circle 2 (mm) 0,9 0,8 0,7 0,65 0,6 0,55 0,5 0,5 0,45 0,4 0,4 0,35 0,35 0,3 0,3 0,25 0,25 0,25 0,2 0,2 0,2
Flow rate (l/min) 32,8 30,5 27,7 27 26,2 25,3 24,2 25,3 24 22,8 23,6 22,4 23,1 22 22,6 21,5 22,1 22,6 21,7 22,1 22,6
Recoil force (N) 167 170 167 174 179 182 183 199 197 194 208 204 217 212 224 220 230 241 237 247 257
0,6 Nozzle-ø Circle 2 (mm) 0,9 0,8 0,7 0,65 0,6 0,55 0,5 0,45 0,4 0,4 0,35 0,3 0,3 0,25 0,25 0,2 0,2
Flow rate (l/min) 34,5 32,3 29,7 29,2 28,5 27,6 26,7 25,7 24,7 25,7 24,7 23,8 24,5 23,7 24,3 23,6 24,2
Recoil force (N) 176 180 179 188 195 199 202 203 203 219 217 216 230 229 241 240 252
0,65 Nozzle-ø Circle 2 (mm) 0,85 0,75 0,65 0,6 0,55 0,5 0,45 0,4 0,35 0,35 0,3 0,25 0,2 0,2 0,2
Flow rate (l/min) 33,8 31,8 29,5 29,2 28,7 28,1 27,3 26,6 25,9 26,9 26,2 25,6 25,2 25,9 26,6 Recoil force (N) 172 177 192 188 196 202 206 210 213 229 231 233 236 251 264
0,7 Nozzle-ø Circle 2 (mm) 0,85 0,75 0,65 0,6 0,5 0,45 0,4 0,35 0,3 0,25 0,2 0,2
Flow rate (l/min) 35,8 34 31,9 31,7 29,3 28,9 28,5 28 27,6 27,3 27,1 28
Recoil force (N) 182 190 192 204 200 208 215 221 227 232 239 255
0,75 Nozzle-ø Circle 2 (mm) 0,8 0,7 0,6 0,55 0,5 0,4 0,35 0,3 0,25 0,2
Flow rate (l/min) 35,5 34 32,2 32,3 32,2 30,2 30 29,8 29,7 29,8 Recoil force (N) 181 190 194 207 219 217 226 235 244 254
0,8 Nozzle-ø Circle 2 (mm) 0,8 0,7 0,6 0,5 0,45 0,35 0,3 0,2 0,2
Flow rate (l/min) 37,8 36,5 34,9 33,2 33,4 31,8 32 31 32,4 Recoil force (N) 193 204 210 214 228 229 241 245 266
0,85 Nozzle-ø Circle 2 (mm) 0,75 0,65 0,55 0,45 0,4 0,3
Flow rate (l/min) 37,9 37 35,8 34,5 34,9 33,9
Recoil force (N) 193 206 216 222 239 244
0,9 Nozzle-ø Circle 2 (mm) 0,7 0,6 0,5 0,4 0,3
Flow rate (l/min) 36,4 37,8 37 36,2 35,6 Recoil force (N) 195 211 223 233 243
0,95 Nozzle-ø Circle 2 (mm) 0,7 0,55 0,45 0,3
Flow rate (l/min) 41,1 39 38,6 37 Recoil force (N) 209 217 232 239
1 Nozzle-ø Circle 2 (mm) 0,65 0,5 0,35 0,2
Flow rate (l/min) 42 40,4 39,2 38,8
Recoil force (N) 214 225 236 250
1,1 Nozzle-ø Circle 2 (mm) 0,55 0,35
Flow rate (l/min) 44,6 43
Recoil force (N) 227 240
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 96
NOZZLE SELECTION TABLE FOR NOZZLE CARRIER HEAD TD07-3000 – 25°
Examples: Operating pressure: 1500 bar Flow rate: 25 l/min Inner Circle(Circle 1): 3 x Nozzles F21-Saphir ø 0,4 mm Outer Circle (Circle 2): 3 x Nozzles F21-Saphir ø 0,55 mm Or Inner Circle(Circle 1): 3 x Nozzles F21-Saphir ø 0,45 mm Outer Circle (Circle 2): 3 x Nozzles F21-Saphir ø 0,5 mm
Nozzle carrier head TD07 kpl. Mat.-Nr.: 9.886-877.0 Weight: 0,7 kg
3 Nozzles 3 Nozzles
Guard plate for TD07 Mat.-Nr.: 9.877-573.0
Hexagonal head screw Mat.-Nr.: 9.880-195.0
Spring pin Mat.-Nr.: 9.880-641.0
Flow insert Mat.-Nr.: 9.877-683.0
Sphere Mat.-Nr.: 9.883-371.0
Nozzle carrier head TD07 Mat.-Nr.: 9.876-918.0
Threaded pin Mat.-Nr.: 9.881-012.0
Circle 1
Circle 2
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 97
The recoil forces at hand-held jetting devices must never exceed 250 N in the longitudinal axis. In case of recoil forces > 150 N the hand-held jetting devices (guns, lances) must be equipped with a body support!
TD 07 Operating pressure (bar) 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 Nozzle-ø Circle 1 (mm)
Dummy nozzle Nozzle-ø Circle 2 (mm) 1,1 1 0,9 0,85 0,8 0,75 0,75 0,7 0,65 0,65 0,6 0,6 0,6 0,55 0,55 0,55 0,5 0,5 0,5 0,5 0,45 0,45 0,45 0,45
Flow rate (l/min) 35,7 32,3 28,3 27 25,3 23,5 24,6 22,4 20,1 20,9 18,4 19 19,6 16,9 17,4 17,9 15,5 15,8 16,2 16,5 13,9 14,1 14,4 14,6
Recoil force (N) 184 182 172 176 175 171 188 179 167 180 164 175 186 165 175 184 167 175 182 190 166 172 178 184
0,2 Nozzle-ø Circle 2 (mm) 1,1 0,95 0,9 0,85 0,8 0,75 0,7 0,7 0,65 0,65 0,6 0,6 0,55 0,55 0,55 0,5 0,5 0,5 0,5 0,45 0,45 0,45 0,45 0,4 0,4
Flow rate (l/min) 36,9 30,5 29,7 28,5 26,9 25,1 23,2 24,2 22 22,8 20,4 21,1 18,6 19,2 19,7 17,1 17,5 17,9 18,4 15,7 16 16,3 16,6 14,2 14,5 Recoil force (N) 190 172 181 185 186 183 177 193 183 197 182 194 177 187 198 176 185 194 203 177 184 191 199 176 182
0,25 Nozzle-ø Circle 2 (mm) 1,1 0,95 0,9 0,85 0,8 0,75 0,7 0,65 0,65 0,6 0,6 0,55 0,55 0,55 0,5 0,5 0,5 0,5 0,45 0,45 0,45 0,45 0,4 0,4 0,4
Flow rate (l/min) 37,6 31,2 30,5 29,3 27,8 26,1 24,2 22,2 23,1 20,9 21,6 19,3 19,9 20,4 18 18,4 18,9 19,3 16,8 17,3 17,5 17,8 15,5 15,8 16,1 Recoil force (N) 193 176 186 191 192 190 185 177 191 180 192 177 188 200 180 190 199 209 185 193 201 209 189 196 203
0,3 Nozzle-ø Circle 2 (mm) 0,95 0,9 0,8 0,75 0,75 0,7 0,65 0,65 0,6 0,6 0,55 0,55 0,5 0,5 0,5 0,45 0,45 0,45 0,45 0,4 0,4 0,4 0,4
Flow rate (l/min) 32,1 31,4 27,3 25,8 27,2 25,4 23,4 24,4 22,2 23 20,7 21,4 19 19,6 20,1 17,7 18,1 18,5 18,9 16,8 17,1 17,5 17,8
Recoil force (N) 181 191 177 178 198 194 187 202 191 205 191 203 186 196 207 187 195 204 213 197 205 213 220
0,35 Nozzle-ø Circle 2 (mm) 1 0,95 0,85 0,8 0,75 0,7 0,7 0,65 0,6 0,6 0,55 0,55 0,5 0,5 0,5 0,45 0,45 0,45 0,45 0,4 0,4 0,4 0,4 0,35 0,35 0,35
Flow rate (l/min) 33,1 33,1 29,5 28,5 27,1 25,6 26,8 24,9 23 23,8 21,7 22,4 20,3 20,9 21,4 19,2 19,7 20,1 20,6 18,3 18,6 19 19,4 17,1 17,4 17,7 Recoil force (N) 170 186 179 185 187 186 205 199 191 205 194 207 192 204 215 197 207 217 227 206 214 223 232 208 216 223
0,4 Nozzle-ø Circle 2 (mm) 1,0 0,95 0,85 0,8 0,75 0,7 0,65 0,65 0,6 0,55 0,55 0,5 0,5 0,5 0,45 0,45 0,45 0,4 0,4 0,4 0,4 0,35 0,35 0,35 0,35 0,3
Flow rate (l/min) 34,2 34,3 30,8 29,9 28,6 27,1 25,5 26,6 24,7 22,8 23,6 21,6 22,3 23 20,9 21,4 21,9 19,8 20,3 20,7 21,1 19 19,4 19,7 20,1 18,1 Recoil force (N) 176 194 188 194 197 197 195 212 205 197 211 199 212 224 209 220 231 214 224 233 243 223 232 240 249 228
0,45 Nozzle-ø Circle 2 (mm) 1,0 0,9 0,85 0,8 0,7 0,7 0,65 0,6 0,6 0,55 0,5 0,5 0,5 0,45 0,45 0,4 0,4 0,4 0354 0,35 0,35 0,35 0,3 0,3 0,3 0,3
Flow rate (l/min) 35,5 32,7 32,3 31,4 27,4 28,9 27,4 25,7 26,8 24,9 23,1 23,9 24,6 22,7 23,3 21,4 21,9 22,4 20,6 21 21,4 21,9 20,1 20,4 20,8 21,1 Recoil force (N) 186 185 197 205 189 210 209 205 222 215 206 220 234 221 234 220 231 242 227 237 247 257 240 249 258 266
0,5 Nozzle-ø Circle 2 (mm) 1,0 0,9 0,85 0,75 0,7 0,65 0,6 0,6 0,55 0,5 0,5 0,45 0,45 0,45 0,4 0,4 0,35 0,35 0,3 0,3 0,3 0,3 0,25 0,25 0,25
Flow rate (l/min) 36,9 34,3 34 30,3 29,3 28,1 26,7 27,9 26,3 24,7 25,6 23,9 24,6 25,3 23,6 24,2 22,5 23,1 22 22,4 22,9 23,3 21,8 22,2 22,6
Recoil force (N) 190 193 207 197 202 204 203 222 218 213 228 220 234 247 237 249 238 249 248 258 268 279 266 275 285
0,55 Nozzle-ø Circle 2 (mm) 1,0 0,9 0,8 0,75 0,7 0,65 0,6 0,55 0,5 0,5 0,45 0,45 0,4 0,4 0,4 0,35 0,35 0,3 0,3 0,3 0,25 0,25 0,2 0,2 0,2 0,2
Flow rate (l/min) 38,4 36 32,9 32,3 31,4 30,3 29 27,7 26,3 27,3 25,8 26,7 25,2 25,9 26,6 25,1 25,7 24,3 24,8 25,4 24,1 24,6 23,5 23,9 24,3 24,8
Recoil force (N) 198 203 200 210 217 220 221 220 218 235 230 245 239 253 268 258 271 262 274 286 277 288 299 291 302 312
0,6 Nozzle-ø Circle 2 (mm) 1,0 0,9 0,8 0,7 0,65 0,6 0,55 0,55 0,5 0,45 0,4 0,4 0,35 0,35 0,35 0,3 0,3 0,25 0,25 0,2 0,2 0,2
Flow rate (l/min) 40,1 37,8 34,9 31,7 31 30 29 30,3 29 27,8 26,6 27,4 26,3 27 27,8 26,6 27,2 26,1 26,8 25,9 26,4 26,9
Recoil force (N) 207 213 213 207 214 219 221 241 241 239 237 250 249 264 278 273 287 282 295 292 304 316
0,65 Nozzle-ø Circle 2 (mm) 0,95 0,85 0,75 0,7 0,65 0,6 0,55 0,5 0,45 0,4 0,4 0,35 0,35 0,3 0,3 0,25 0,25 0,2
Flow rate (l/min) 39,1 37 34,4 34,1 33,5 32,7 31,7 30,7 29,7 28,8 29,8 28,8 26,7 28,7 29,5 28,6 29,3 28,6
Recoil force (N) 201 209 209 222 231 238 242 245 247 248 265 265 281 280 296 295 309 309
0,7 Nozzle-ø Circle 2 (mm) 0,95 0,85 0,75 0,65 0,6 0,55 0,5 0,45 0,45 0,4 0,35 0,3 0,3 0,25 0,2 0,2
Flow rate (l/min) 41,1 39,2 36,7 34,1 33,7 33 32,4 31,7 33 32,1 31,3 30,6 31,6 30,9 30,5 31,3 Recoil force (N) 221 221 224 222 232 241 247 252 273 276 279 282 299 302 306 322
0,75 Nozzle-ø Circle 2 (mm) 0,9 0,8 0,7 0,65 0,55 0,5 0,5 0,45 0,4 0,35 0,3 0,25 0,2
Flow rate (l/min) 40,5 38,9 36,7 36,8 34,2 33,9 35,6 35 34,4 33,8 33,4 33 32,8 Recoil force (N) 208 219 224 239 236 247 271 279 285 291 297 304 311
0,8 Nozzle-ø Circle 2 (mm) 0,9 0,8 0,7 0,6 0,5 0,5 0,45 0,4 0,35 0,3 0,2
Flow rate (l/min) 42,8 41,4 39,5 37,3 35,2 37,1 36,9 36,6 36,3 36 34,8
Recoil force (N) 220 233 240 243 243 270 281 292 301 310 310
0,85 Nozzle-ø Circle 2 (mm) 0,85 0,75 0,65 0,55 0,5 0,45 0,35 0,3 0,25 0,2
Flow rate (l/min) 42,6 41,5 40 38,3 38,5 38,6 37 37,1 37,4 37,7 Recoil force (N) 219 234 243 249 266 281 282 296 310 324
0,9 Nozzle-ø Circle 2 (mm) 0,8 0,7 0,6 0,55 0,45 0,35 0,3 0,2
Flow rate (l/min) 42,8 42 40,9 41,5 40,1 38,9 39,4 38,9 Recoil force (N) 220 237 249 270 277 283 300 310
0,95 Nozzle-ø Circle 2 (mm) 0,8 0,65 0,6 0,5 0,4 0,3 0,2
Flow rate (l/min) 45,5 42,8 44,1 43 42,1 21,4 41,3
Recoil force (N) 234 241 268 280 290 301 315
1 Nozzle-ø Circle 2 (mm) 0,75 0,6 0,55 0,45 0,35 0,2
Flow rate (l/min) 46,1 44 45,5 44,9 44,4 43,4 Recoil force (N) 237 248 277 292 307 316
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 98
NOZZLE SELECTION TABLE FOR NOZZLE CARRIER HEAD TD08-3000 – 25°
Example: Operating pressure: 1500 bar Flow rate: 25 l/min Inner Circle(Circle 1): 3 x Nozzles F21-Saphir ø 0,6 mm Outer Circle (Circle 2): 3 x Nozzles F21-Saphir ø 0,35 mm
Nozzle carrier head TD08 kpl. Mat.-Nr.: 9.886-879.0 Weight: 0,9 kg
3 Nozzles
3 Nozzles
Guard plate for TD08 Mat.-Nr.: 9.877-609.0
Hexagonal head screw Mat.-Nr.: 9.880-195.0
Spring pin Mat.-Nr.: 9.880-641.0
Flow insert Mat.-Nr.: 9.877-683.0
Sphere Mat.-Nr.: 9.883-371.0
Nozzle carrier head TD07 Mat.-Nr.: 9.877-595.0
Threaded pin Mat.-Nr.: 9.881-012.0
Circle 1
Circle 2
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 99
The recoil forces at hand-held jetting devices must never exceed 250 N in the longitudinal axis. In case of recoil forces > 150 N the hand-held jetting devices (guns, lances) must be equipped with a body support!
TD 08 Operating pressure (bar) 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 Nozzle-ø Circle 1 (mm)
0,2 Nozzle-ø Circle 2 (mm) 1,0 0,9 0,85 0,8 0,75 0,75 0,7 0,7 0,65 0,65 0,6 0,6 0,6 0,55 0,55 0,55 0,5 0,5 0,5 0,5 0,45 0,45 0,45 0,45
Flow rate (l/min) 36,3 31,7 30,2 28,4 26,4 27,5 25,2 26,2 23,6 24,4 21,8 22,4 23 20,2 20,7 21,2 18,3 18,8 19,1 19,5 16,6 16,9 17,2 17,5 Recoil force (N) 221 207 208 207 201 220 209 225 211 224 207 219 231 208 218 229 203 211 220 229 199 206 214 221
0,25 Nozzle-ø Circle 2 (mm) 0,95 0,9 0,85 0,8 0,75 0,7 0,7 0,65 0,65 0,6 0,6 0,55 0,55 0,55 0,5 0,5 0,5 0,5 0,45 0,45 0,45 0,45 0,45 0,4
Flow rate (l/min) 33,7 32,6 31,1 29,3 27,4 25,3 26,3 24 24,8 22,3 23 20,4 21 21,5 18,9 19,3 19,8 20,2 17,5 17,8 18,2 18,5 18,8 16,1
Recoil force (N) 205 212 215 213 209 201 218 206 221 205 218 200 211 222 199 209 218 228 201 209 217 225 233 203
0,3 Nozzle-ø Circle 2 (mm) 0,95 0,9 0,85 0,8 0,75 0,7 0,65 0,65 0,6 0,6 0,55 0,55 0,55 0,5 0,5 0,5 0,45 0,45 0,45 0,45 0,4 0,4 0,4 0,4
Flow rate (l/min) 34,7 33,6 32,2 30,5 28,6 26,5 24,4 25,3 23 23,8 21,4 22 22,6 20 20,6 21 18,5 18,9 19,3 19,7 17,1 17,5 17,8 18 Recoil force (N) 211 219 222 222 218 211 202 218 205 219 203 215 226 206 217 227 204 213 222 231 205 213 220 228
0,35 Nozzle-ø Circle 2 (mm) 1,1 1 0,95 0,85 0,8 0,75 0,7 0,7 0,65 0,6 0,6 0,55 0,55 0,5 0,5 0,5 0,45 0,45 0,45 0,4 0,4 0,4 0,35 0,35 0,35 0,35
Flow rate (l/min) 39,3 35,3 35,8 31,5 30,2 28,6 26,8 28 25,9 23,8 24,7 22,4 23,1 20,8 21,4 22 19,7 20,1 20,6 18,3 18,6 19 16,8 17,1 17,4 17,7 Recoil force (N) 202 205 218 205 208 208 205 223 215 205 220 207 219 203 215 226 207 217 227 206 215 223 201 208 215 223
0,4 Nozzle-ø Circle 2 (mm) 1,1 1 0,9 0,85 0,8 0,75 0,7 0,65 0,6 0,6 0,55 0,55 0,5 0,5 0,45 0,45 0,4 0,4 0,4 0,35 0,35 0,35 0,3 0,3 0,3 0,25
Flow rate (l/min) 40,4 37,5 33,9 32,9 31,7 30,2 28,5 26,6 24,7 25,7 23,6 24,4 22,3 23 20,9 21,4 19,3 19,8 20,3 18,3 18,6 19 17,1 17,5 17,8 16,1
Recoil force (N) 208 211 206 214 219 219 217 212 205 221 211 225 212 224 209 220 204 214 224 206 215 223 205 213 220 203
0,45 Nozzle-ø Circle 2 (mm) 1,1 1 0,9 0,8 0,75 0,7 0,65 0,6 0,6 0,55 0,5 0,5 0,45 0,45 0,4 0,4 0,35 0,35 0,3 0,3 0,3 0,25 0,25 0,2 0,2 0,2
Flow rate (l/min) 41,7 38,9 35,4 31,4 30,3 28,9 27,4 25,7 26,8 24,9 23,1 23,9 22 22,7 20,9 21,4 19,7 20,1 18,5 18,9 19,3 17,8 18,2 16,9 17,3 17,5 Recoil force (N) 214 219 215 205 209 210 209 205 222 215 206 220 209 221 209 220 207 217 204 213 222 209 217 206 214 221
0,5 Nozzle-ø Circle 2 (mm) 1,1 0,95 0,85 0,8 0,7 0,65 0,6 0,6 0,55 0,5 0,45 0,45 0,4 0,4 0,35 0,3 0,3 0,25 0,25 0,2 0,2 Blind Blind Blind Blind
Flow rate (l/min) 43,1 37,3 34 33,2 29,3 28,1 26,7 27,9 26,3 24,7 23,1 23,9 22,3 23 21,4 20,1 20,6 19,3 19,8 18,8 19,1 17,1 17,5 17,8 18,1 Recoil force (N) 222 210 207 216 202 204 204 222 218 217 206 220 212 224 215 207 217 209 218 211 220 205 213 220 228
0,55 Nozzle-ø Circle 2 (mm) 1,1 0,95 0,85 0,75 0,7 0,65 0,6 0,55 0,5 0,45 0,4 0,35 0,35 0,3 0,25 0,2 0,2 Blind Blind Blind Blind
Flow rate (l/min) 44,6 39 35,8 32,3 31,4 30,3 29 27,7 26,3 24,9 23,6 22,4 23,1 22 21 20,2 20,7 18,7 19,1 19,6 20
Recoil force (N) 229 220 218 210 217 220 221 220 218 215 211 207 219 215 211 208 218 202 211 220 230
0,6 Nozzle-ø Circle 2 (mm) 1 0,9 0,8 0,7 0,65 0,6 0,55 0,5 0,45 0,4 0,35 0,3 0,25 0,2 Blind Blind Blind
Flow rate (l/min) 40,1 37,8 34,9 31,7 31 30 29 27,9 26,8 25,7 24,7 23,8 23 22,4 20,7 21,4 21,8
Recoil force (N) 207 213 213 207 214 219 221 222 222 221 220 219 218 219 208 219 230
0,65 Nozzle-ø Circle 2 (mm) 1 0,85 0,75 0,7 0,6 0,55 0,45 0,4 0,35 0,3 0,2 Blind Blind Blind
Flow rate (l/min) 42 37 34,4 34,1 31 30,3 27,4 26,6 25,9 25,3 23,6 22,3 23 23,7
Recoil force (N) 216 209 209 222 214 220 209 212 215 218 211 205 218 231
0,7 Nozzle-ø Circle 2 (mm) 0,95 0,85 0,7 0,65 0,55 0,45 0,4 0,3 0,25 Blind Blind
Flow rate (l/min) 41,1 39,2 34,2 34,1 31,4 28,9 28,5 26,5 26,3 24,2 25
Recoil force (N) 211 221 208 222 217 210 217 211 218 208 223
0,75 Nozzle-ø Circle 2 (mm) 0,9 0,8 0,65 0,55 0,45 0,4 0,3 0,2 Blind
Flow rate (l/min) 40,5 38,9 34,4 32,3 30,3 30,2 28,6 27,5 26,8 Recoil force (N) 208 219 209 210 209 219 218 220 222
0,8 Nozzle-ø Circle 2 (mm) 0,9 0,75 0,6 0,5 0,4 0,25 Blind
Flow rate (l/min) 42,8 38,9 34,9 33,2 31,7 29,3 28 Recoil force (N) 220 219 213 216 219 213 214
0,85 Nozzle-ø Circle 2 (mm) 0,85 0,7 0,55 0,4 0,25 Blind
Flow rate (l/min) 42,6 39,2 35,8 32,9 31,1 30,2
Recoil force (N) 219 221 218 214 215 219
0,9 Nozzle-ø Circle 2 (mm) 0,8 0,6 0,45 0,25 Blind
Flow rate (l/min) 42,8 37,8 35,4 32,6 32,1 Recoil force (N) 220 213 215 212 221
0,95 Nozzle-ø Circle 2 (mm) 0,7 0,5 0,3 Blind
Flow rate (l/min) 41,1 37,3 34,7 33,7 Recoil force (N) 211 210 211 219
1 Nozzle-ø Circle 2 (mm) 0,65 0,4 Blind
Flow rate (l/min) 42 37,5 34,9 Recoil force (N) 216 211 213
1,1 Nozzle-ø Circle 2 (mm) 0,45 Blind
Flow rate (l/min) 41,7 39,1 Recoil force (N) 214 220
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 100
NOZZLE SELECTION TABLE FOR NOZZLE CARRIER HEAD TD09-3000 – 35°
Examples: Operating pressure: 1000 bar Flow rate: 15 l/min Inner Circle(Circle 1): 3 x Nozzles F21-Saphir ø 0,25 mm Outer Circle (Circle 2): 3 x Nozzles F21-Saphir ø 0,55 mm Or Inner Circle(Circle 1): 3 x Nozzles F21-Saphir ø 0,45 mm Outer Circle (Circle 2): 3 x Nozzles F21-Saphir ø 0,4 mm
Nozzle carrier head TD09 kpl. Mat.-Nr.: 9.899-828.0 Weight: 0,9 kg
3 Nozzles
3 Nozzles
Guard plate for TD09 Mat.-Nr.: 9.877-610.0
Hexagonal head screw Mat.-Nr.: 9.880-195.0
Spring pin Mat.-Nr.: 9.880-641.0
Flow insert Mat.-Nr.: 9.877-683.0
Sphere Mat.-Nr.: 9.883-371.0
Nozzle carrier head TD07 Mat.-Nr.: 9.877-595.0
Threaded pin Mat.-Nr.: 9.881-012.0
Circle 1
Circle 2
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015 101
The recoil forces at hand-held jetting devices must never exceed 250 N in the longitudinal axis. In case of recoil forces > 150 N the hand-held jetting devices (guns, lances) must be equipped with a body support!
TD 09 Operating pressure (bar) 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 Nozzle-ø Circle 1 (mm)
0,2 Nozzle-ø Circle 2 (mm) 0,85 0,75 0,7 0,65 0,6 0,55 0,5 0,5 0,45 0,45 0,4 0,4 0,35 0,35 0,35 0,3 0,3 0,3 0,3
Flow rate (l/min) 22,5 19,5 18,5 17,3 15,8 15 13,3 13,8 12,4 12,8 11,2 11,5 10,1 10,3 10,5 8,9 9,1 9,2 9,4 Recoil force (N) 113 107 110 110 107 112 103 112 108 115 107 113 106 111 116 104 108 112 115
0,25 Nozzle-ø Circle 2 (mm) 0,8 0,75 0,7 0,65 0,6 0,55 0,5 0,45 0,45 0,45 0,4 0,4 0,35 0,35 0,35 0,3 0,3 0,3 0,3 0,25 0,25 0,25
Flow rate (l/min) 20,7 20,2 19,3 18,1 16,7 15,2 14,3 12,6 13 13,5 11,7 12,1 10,6 10,9 11,2 9,6 9,9 10,1 10,3 8,7 8,9 9
Recoil force (N) 104 111 115 115 112 108 111 102 110 118 106 112 104 110 115 104 109 113 118 104 108 111
0,3 Nozzle-ø Circle 2 (mm) 0,8 0,7 0,65 0,6 0,55 0,55 0,5 0,45 0,45 0,4 0,4 0,35 0,35 0,3 0,3 0,3 0,25 0,25 0,25 0,25 0,2 0,2 0,2 0,2
Flow rate (l/min) 21,5 18,8 17,9 16,8 15,5 16,4 14,9 13,4 13,9 12,3 12,8 11,6 11,9 10,6 10,9 11,1 9,7 9,9 10,1 10,3 8,9 9,1 9,2 9,4 Recoil force (N) 108 103 106 107 105 116 111 104 113 104 111 107 114 107 112 117 104 109 113 118 104 108 112 116
0,35 Nozzle-ø Circle 2 (mm) 0,8 0,7 0,65 0,6 0,55 0,5 0,45 0,45 0,4 0,4 0,35 0,35 0,3 0,3 0,25 0,25 0,25 0,2 0,2 0,2 Blind Blind
Flow rate (l/min) 22,5 19,8 19 16,8 16,8 15,5 14,2 14,9 13,4 14 12,5 12,9 11,6 11,9 10,6 10,9 11,2 10,1 10,3 10,5 8,7 8,9 Recoil force (N) 113 109 113 114 114 111 106 116 109 117 109 116 107 114 104 110 115 106 111 116 105 109
0,4 Nozzle-ø Circle 2 (mm) 0,75 0,65 0,6 0,55 0,5 0,45 0,4 0,4 0,35 0,3 0,3 0,25 0,25 0,2 0,2 Blind Blind Blind
Flow rate (l/min) 21,3 18,8 18,2 17,3 16,2 15,1 14 14,6 13,4 12,3 12,8 11,7 12,1 11,2 11,5 9,9 10,1 10,3 Recoil force (N) 107 104 108 110 110 108 104 114 109 104 111 106 112 107 113 104 109 114
0,45 Nozzle-ø Circle 2 (mm) 0,75 0,65 0,55 0,5 0,45 0,4 0,35 0,3 0,3 0,25 0,2 Blind Blind Blind
Flow rate (l/min) 22,6 20,2 17,6 16,9 16 15,1 14,2 13,4 13,9 13,8 12,4 11 11,3 11,7
Recoil force (N) 114 111 105 107 108 108 106 104 113 110 108 102 108 114
0,5 Nozzle-ø Circle 2 (mm) 0,7 0,6 0,5 0,45 0,4 0,35 0,3 0,25 0,2 Blind Blind
Flow rate (l/min) 21,8 19,7 17,5 16,9 16,2 15,5 14,9 14,3 13,8 12,3 12,8 Recoil force (N) 110 109 104 107 110 111 111 111 112 104 111
0,55 Nozzle-ø Circle 2 (mm) 0,65 0,55 0,45 0,4 0,35 0,25 0,2 Blind Blind
Flow rate (l/min) 21,4 19,6 17,6 17,3 16,8 15,2 15 13,8 14,4
Recoil force (N) 108 108 105 110 114 108 112 108 117
0,6 Nozzle-ø Circle 2 (mm) 0,6 0,5 0,4 0,3 0,2 Blind Blind
Flow rate (l/min) 21,2 19,7 18,2 16,8 15,8 15 15,8
Recoil force (N) 107 109 108 107 107 107 118
0,65 Nozzle-ø Circle 2 (mm) 0,55 0,45 0,3 0,2 Blind
Flow rate (l/min) 21,4 20,2 17,9 17,3 16,7
Recoil force (N) 108 111 106 110 113
0,7 Nozzle-ø Circle 2 (mm) 0,5 0,35 0,2 Blind
Flow rate (l/min) 21,8 19,8 18,5 18,3 Recoil force (N) 110 109 110 116
0,75 Nozzle-ø Circle 2 (mm) 0,45 0,2 Blind
Flow rate (l/min) 22,6 19,5 19,6
Recoil force (N) 114 107 117
0,8 Nozzle-ø Circle 2 (mm) 0,3 Blind
Flow rate (l/min) 21,5 20,7 Recoil force (N) 108 114
0,85 Nozzle-ø Circle 2 (mm) 0,2
Flow rate (l/min) 22,5 Recoil force (N) 113
0,9 Nozzle-ø Circle 2 (mm)
Flow rate (l/min)
Recoil force (N)
0,95 Nozzle-ø Circle 2 (mm)
Flow rate (l/min) Recoil force (N)
1 Nozzle-ø Circle 2 (mm)
Flow rate (l/min) Recoil force (N)
1,1 Nozzle-ø Circle 2 (mm)
Flow rate (l/min)
Recoil force (N)
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
102
4.1 ABRASIVE BLASTER
4.1.1 Abrasive blaster 1000-9/16
Description: The Abrasive blaster functions as an injector. The high pressure water – coming out of the three orifices in the Form 98 nozzle at high speed – create a vacuum which sucks the abrasive media. The mix of high pressure water and abrasive media make the abrasive blaster an extremely efficient cleaning tool.
Accessories: Nozzle set 3xnozzle 0,9- 500bar-33l/min MN 9.886-549.0 Nozzle set 3xnozzle 0,7- 600bar-28l/min MN 9.886-551.0 Nozzle set 3xnozzle 0,6- 800bar-21l/min MN 9.886-550.0 Nozzle set 3xnozzle 0,7-1000bar-30l/min MN 9.886-551.0 Installation tools for nozzle Form 98 Material-No.: 6.025-257.0 Connecting adapter to high pressure gun models HP 750-2 , Nozzle pipe Ø25mm Material-No.: 9.872-159.0 i G 3/8 – a 9/16-18UNF LH
Technical data: Operating pressure Medium temperature Abrasive blaster 1000-9/16 without nozzle Form 98
Abrasive blaster for Ecotherm 500 with nozzle Form 98 3x Ø0,9 mm
Abrasive blaster for Ecotherm 600 with nozzle Form 98 3x Ø0,7 mm Abrasive blaster for Ecotherm 800 with nozzle Form 98 3x Ø0,6 mm Abrasive blaster for Ecocold 1000 with nozzle Form 98 3x Ø0,7 mm Abrasive media Grain size 0,5 – 1,0 mm Grain size 0,7 – 1,4 mm
Suction lance for abrasive media The Suction lance made of stainless steel guarantee an optimum suction out of the abrasive tank
Abrasive suction hose with wire braid, 15m long, grounding possible
max.1000 bar
max.100°C
MN 9.872-259.0
MN 9.872-249.0 500 bar - 33 l/min
MN 9.872-435.0
600 bar - 28 l/min
MN 9.872-250.0 800 bar - 21 l/min
MN 9.872-435.0 1000 bar - 30 l/min
25 kg MN 6.025-309.0 MN 6.025-310.0
MN 6.025-258.0
MN 6.025-308.0
Ø19m
m
* Feeding pipe for abrasive media
* Zulaufrohr für Abrasivstoff
3x nozzle form 983x Düse Form 98
ca./appr.
100
mm
ca./appr. 185 mm
9/1
6-1
8U
NF
LH
Hochdruckanschluss
High pressure connection
High pressure connection
Feeding pipe for abrasive media
3 X nozzle form 98
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
103
Abrasive media Grain size 0,5-1,0 mm Mat.-No.: 6.025-309.0 Grain size 0,7-1,4 mm Mat.-No.: 6.025-310.0
Option: Abrasive media tank
Abrasive blaster 1000-9/16
Abrasive suction hose 15m long, grounding possible Mat.-No.: 6.025-308.0
Connection High pressure hose
Suction lance Mat.-No.: 6.025-258.0
High pressure gun
25 kg
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
104
Round jet nozzle Form 98
Verwendung bei : Düsenträger To use for : Nozzle carriers
Düse Strömungseinsatz
Nozzle Flow straightener
ø d Index
Material-Nr. ø d Index
Material-Nr. ø d Index
Material-Nr. Material-Nr.
mm Part-No. mm Part-No. mm Part-No. Part-No.
0,4 0,4 9.886-545.0 1,3 1,2 9.886-541.0 2,2 3,5 9.886-535.0
0,55 0,43 9.886-546.0 1,4 1,4 9.910-932.0 2,3 3,9 9.886-544.0
0,6 0,44 6.025-256.0 1,5 1,6 9.886-530.0 2,4 4,2 9.886-536.0
0,7 0,46 6.025-255.0 1,6 1,8 9.886-531.0 2,5 4,6 9.886-537.0 9.875-894.0
0,8 0,48 9.886-538.0 1,7 2,0 9.886-532.0 2,6 5,2 9.886-547.0
0,9 0,6 9.886-539.0 1,8 2,3 9.886-533.0 2,7 5,5 9.886-548.0
1,0 0,7 9.886-529.0 1,9 2,5 9.886-542.0
1,1 0,9 9.886-540.0 2,0 2,8 9.886-534.0
1,2 1,05 9.886-528.0 2,1 3,1 9.886-543.0
Die Rundstrahldüsen Form 98 werden mit LOCTITE 601 eingeklebt. 50 ccm Material-Nr. 9.915-188.0. Zur Demontage der Rundstrahldüse müssen die Düsenträger im Heißluftofen (Herd) bei ca. 200°C – 250° 20 – 30 Minuten erhitzt werden. Dadurch wird erreicht, dass die Düsen ohne Kraftaufwand und ohne Beschädigung herausgeschraubt werden können. Der Strömungseinsatz wird von Hand in die Bohrung gedrückt und ist bei Bedarf (Verschleiß) auszutauschen.
Montagewerkzeug: Material-Nr. 6.025-257.0
The round jet nozzles form 98 must be mounted with LOCTITE 601. 50 ccm Mat. No 9.915-188.0. For removal of nozzles heat nozzle up to 200°C – 250°C with hot air. This can be done by placing the nozzle carriers into a kiln for 20 – 30 mins. Therefore allowing the nozzles to be removed without damage or force. The flow straightener is to be mounted by hand into the bore hole, and if necessary (wear and tear) it has to be exchanged.
Mounting tool: Mat-No. 6.025-257.0
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
105
4.2 SPEEDY
4.2.1 Speedy 3000
Description:
The SPEEDY is a pneumatically driven rotary lead through with integrated air motor, suitable for a wide range of application. The composition of HP-Gun, Speedy and Nozzle Carrier Head represents a highly efficient water tool, which guarantees – depending on the rotation of the nozzle carrier head – a high surface treatment/cleaning rate.
Special characteristics:
Rotational speed adjustable by air pressure and quantity
Low weight
Compact design with small dimensions
Optimum running qualities
Parts under pressure made of high-tensile stainless steel
Accessories:
Pressure ring for high pressure connection M14x1,5 LH Material-No.: 9.883-493.0
Technical data: Material-No.: Operating pressure: Flow rate: Medium temperature: Weight: Working pressure of the air motor: Performance at working rpm: Air consumption: Sense of rotation: Length: Width:
9.871-342.0
max. 3000 bar
max. 25 l/min
max. +50 °C
approx. 2,30 kg
6,3 bar
0,16 kW 2500 1/min
0,35-0,4 m³/min at 6,3 bar
clockwise in jet direction
approx. 339 mm
100 mm
Compressed air
connection KS ¼“
High pressure connection
9/16“ – 18 UNF LH
Air oiler
Nozzle carrier head connection
M14x1,5 Air motor
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
106
SPEEDY 3000 – Components
Nozzle carrier head
Material-No.:
Number of nozzle
form 21 LL
Typ-bar
Weight
kg
9.886-774.0 2 E 02-3000 0,45
9.886-775.0 3 E 03-3000 0,45
9.886-772.0 3 or 6 E 05-3000 0,47
9.886-773.0 3 or 6 E 09-3000 0,85
9.886-645.0 3 or 6 E 24-3000 0,85
Compressed air hose
Material-No.
Length
m
Weight
kg
9.887-259.0 10 2,6
6.025-249.0 20 5,0
6.025-250.0 40 9,6
Nozzle carrier head E02 – 3000 Spraying angle: 20°
Nozzle carrier head E03 – 3000 Spraying angle: 30°
Nozzle carrier head E09 – 3000 Spraying angle: 20°, 24°
Nozzle carrier head E05 – 3000 Spraying angle: 20°, 24°
Operating information: The air motor is only to be used with dry, clean and lubricated air. Only fill up with pneumatic oil WOMA MN 9.890-539.0 – viscosity class ISO VG 46. The max. permitted air pressure of 6,3 bar has not to be exceeded.
Nozzle carrier head E24 – 3000 Spraying angle: 30°
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
107
4.2.2 Nozzle carrier heads 3000 bar
Nozzle carrier head type E02-3000 Material-No.: 9.886-774.0 Material: Stainless steel Total diameter: 42 mm
Total length: 64 mm Pressure connection: M14 x 1,5 Number of nozzles: 2 Nozzles: Form 21 LL Weight: 0,45 kg Material-No. protecting cap 9.877-321.0
Nozzle carrier head type E03-3000 Material-No.: 9.886-775.0 Material: Stainless steel Total diameter: 42 mm Total length: 64 mm Pressure connection: M14 x 1,5 Number of nozzles: 3 Nozzles: Form 21 LL Weight: 0,45 kg Material-No. protecting cap 9.877-322.0
Nozzle carrier head type E05-3000 Material-No.: 9.886-772.0 Material: Titanium Total diameter: 52 mm Total length: 89 mm Pressure connection: M14 x 1,5 Number of nozzles: 3 or 6 Nozzles: Form 21 LL Weight: 0,47 kg Material-No. protecting cap 9.877-278.0
Nozzle carrier head type E09-3000 Material-No.: 9.886-773.0 Material: Titanium Total diameter: 59 mm Total length: 130 mm Pressure connection: M14 x 1,5 Number of nozzles: 3 or 6 Nozzles: Form 21 LL Weight: 0,85 kg Material-No. protecting disc 9.877-279.0
Nozzle carrier head type E24-3000 Material-No.: 9.886-645.0 Material: Stainless steel Total diameter: 65 mm Total length: 114 mm Pressure connection: M14 x 1,5 Number of nozzles: 3 or 6 Nozzles: Form 21 LL Weight: 0,85 kg Material-No. protecting cap 9.876-167.0
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
108
5 NOZZLES 5.1 NOZZLE INSERT 5.1.1 Up to 1500 bar
5.1.1.1 Round jet nozzle Form 4
Betriebsdruck: max. 1500 bar Operating pressure: max. 21750 psi
O-Ring 6.025-168.0
O-Ring muss gesondert bestellt werden. O-ring must be ordered separately.
Verwendung bei: Pistolen, Wasserwerkzeuge To use for: guns, water tools
Blinddüse 9.885-944.0 Dummy Nozzle 9.885-944.0
Düsen Nozzle
mm
Betriebsdruck / Operating pressure - bar -
200 300 400 500 600 700 750 800 900 1000 1100 1200 1300 1400 1500
Material-Nr. Material-No.
Düsendurchsatz / Flow rate - l/min Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
0,50 2,1 2,6 3,0 3,4 3,7 4,0 4,1 4,2 4,5 4,7 5,0 5,2 5,4 5,6 5,8
9.885-948.0 7 11 14 18 21 25 26 28 32 35 39 42 46 49 53
0,60 3,1 3,7 4,3 4,8 5,3 5,7 5,9 6,1 6,5 6,8 7,2 7,5 7,8 8,1 8,4
9.885-953.0 10 15 20 25 30 35 38 40 45 50 55 60 66 71 76
0,70 4,2 5,1 5,9 6,6 7,2 7,8 8,0 8,3 8,8 9,3 9,7 10,2 10,6 11,0 11,4
9.885-950.0 14 21 27 34 41 48 51 55 62 69 75 82 89 96 103
0,80 5,4 6,6 7,7 8,6 9,4 10,2 10,5 10,9 11,5 12,1 12,7 13,3 13,8 14,4 14,9
6.025-200.0 18 27 36 45 54 63 67 72 81 90 99 108 117 125 134
0,85 6,1 7,5 8,7 9,7 10,6 11,5 11,9 12,3 13,0 13,7 14,4 15,0 15,6 16,2 16,8
9.886-902.0 20 30 40 51 61 71 76 81 91 101 111 121 132 142 152
0,90 6,9 8,4 9,7 10,9 11,9 12,9 13,3 13,7 14,6 15,4 16,1 16,8 17,5 18,2 18,8
6.025-470.0 23 34 45 57 68 79 85 91 102 113 125 136 147 159 170
1,00 8,5 10,4 12,0 13,4 14,7 15,9 16,4 17,0 18,0 19,0 19,9 20,8 21,6 22,4 23,2
6.025-198.0 28 42 56 70 84 98 105 112 126 140 154 168 182 196 210
1,10 10,3 12,6 14,5 16,2 17,8 19,2 19,9 20,5 21,8 23,0 24,1 25,1 26,2 27,2 28,1
9.885-951.0 34 51 68 85 102 119 127 136 152 169 186 203 220 237 254
1,20 12,2 15,0 17,3 19,3 21,2 22,9 23,8 24,4 25,9 27,3 28,6 29,9 31,1 32,3 33,5
6.025-199.0 40 60 81 101 121 141 151 161 181 202 222 242 262 282 302
1,25 13,3 16,2 18,7 21,0 23,0 24,8 25,7 26,5 28,1 29,6 31,1 32,5 33,8 35,1 36,3
6.025-471.0 44 66 88 109 131 153 164 175 197 219 241 263 284 306 328
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein.
Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support.
The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
109
Round jet nozzle Form 4 Betriebsdruck: max. 1500 bar Operating pressure: max. 21750 psi
O-Ring 6.025-168.0
O-Ring muss gesondert bestellt werden. O-ring must be ordered separately.
Verwendung bei: Pistolen, Wasserwerkzeuge To use for: guns, water tools
Blinddüse 9.885-944.0 Dummy Nozzle 9.885-944.0
Düsen Nozzle
mm
Betriebsdruck / Operating pressure - bar -
200 300 400 500 600 700 750 800 900 1000 1100 1200 1300 1400 1500
Material -Nr. Material -No.
Düsendurchsatz / Flow rate - l/min Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
1,30 14,3 17,6 20,3 22,7 24,8 26,8 27,8 28,7 30,4 32,1 33,6 35,1 36,5 37,9 39,3
6.025-196.0 47 71 95 118 142 166 177 189 213 237 260 284 308 331 355
1,40 16,6 20,4 23,5 26,3 28,8 31,1 32,2 33,3 35,3 37,2 39,0 40,7 42,4 44,0 45,5
9.885-945.0 55 82 110 137 165 192 206 220 247 274 302 329 357 384 412
1,50 19,1 23,4 27,0 30,2 33,1 35,7 37,0 38,2 40,5 42,7 44,8 46,8 48,7 50,5 52,3
9.885-931.0 63 95 126 158 189 221 236 252 284 315 347 378 410 441 473
1,60 21,7 26,6 30,7 34,4 37,6 40,6 42,1 43,4 46,1 48,6 50,9 53,2 55,4 57,5 59,5
9.885-947.0 72 108 143 179 215 251 269 287 323 358 394 430 466 502 538
1,70 24,5 30,0 34,7 38,8 42,5 45,9 45,5 49,0 52,0 54,8 57,5 60,0 62,5 64,9 67,1
9.885-946.0 81 121 162 202 243 283 304 324 364 405 445 486 526 567 607
1,80 27,5 33,7 38,9 43,5 47,6 51,4 53,2 55,0 58,3 61,5 64,5 67,3 70,1 72,7 75,3
9.885-932.0 91 136 181 227 272 318 340 363 408 454 499 544 590 635 681
1,90 30,6 37,5 43,3 48,4 53,0 57,3 59,3 61,2 65,0 68,5 71,8 75,0 78,1 81,0 83,9
9.885-952.0 101 152 202 253 303 354 379 404 455 505 556 607 657 708 758
2,00 33,9 41,6 48,0 53,6 58,8 63,5 65,7 67,9 72,0 75,9 79,6 83,1 86,5 89,8 92,9
9.885-933.0 112 168 224 280 336 392 420 448 504 560 616 672 728 784 840
2,20 41,1 50,3 58,1 64,9 71,1 76,8 79,5 82,1 87,1 91,8 96,3 100,6 104,7 108,6 112,4
9.885-934.0 136 203 271 339 407 474 508 542 610 678 746 813 881 949 1017
2,30 44,9 55,0 63,5 71,0 77,7 83,9 86,9 89,7 95,2 100,3 105,2 109,9 114,4 118,7 122,9
9.885-964.0 148 222 296 370 444 519 556 593 667 741 815 889 963 1037 1111
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein.
Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support.
The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
110
Round jet nozzle Form 4 Betriebsdruck: max. 1500 bar Operating pressure: max. 21750 psi
O-Ring 6.025-168.0
O-Ring muss gesondert bestellt werden. O-ring must be ordered separately.
Verwendung bei: Pistolen, Wasserwerkzeuge To use for: guns, water tools
Blinddüse 9.885-944.0 Dummy Nozzle 9.885-944.0
Düsen Nozzle
mm
Betriebsdruck / Operating pressure - bar -
200 300 400 500 600 700 750 800 900 1000 1100 1200 1300 1400 1500
Material -Nr. Material -No.
Düsendurchsatz / Flow rate - l/min Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
2,40 48,9 59,8 69,1 77,3 84,6 91,4 94,6 97,7 103,6 109,3 114,6 119,7 124,6 129,3 133,8
9.885-935.0 161 242 323 403 484 565 605 645 726 807 887 968 1049 1129 1210
2,50 53,0 64,9 75,0 83,8 91,8 99,2 102,7 106,0 112,5 118,5 124,3 129,9 135,2 140,3 145,2
9.885-936.0 175 263 350 438 525 613 656 700 788 875 963 1050 1138 1225 1313
2,70 61,8 75,7 87,5 97,8 107,1 115,7 119,7 123,7 131,2 138,3 145,0 151,5 157,7 163,6 169,4
9.885-965.0 204 306 408 510 612 715 766 817 919 1021 1123 1225 1327 1429 1531
2,80 66,5 81,4 94,0 105,2 115,2 124,4 128,8 133,0 141,1 148,7 156,0 162,9 169,6 176,0 182,1
9.885-937.0 220 329 439 549 659 768 823 878 988 1098 1208 1317 1427 1537 1647
2,90 71,3 87,4 100,9 112,8 123,6 133,5 138,1 142,7 151,3 159,5 167,3 174,7 181,9 188,7 195,4
9.886-905.0 236 353 471 589 707 824 883 942 1060 1178 1295 1413 1531 1649 1766
3,00 76,3 93,5 108,0 120,7 132,2 142,8 147,8 152,7 161,9 170,7 179,0 187,0 194,6 202,0 209,1
9.885-938.0 252 378 504 630 756 882 945 1008 1134 1260 1386 1512 1638 1764 1890
3,20 86,9 106,4 122,8 137,3 150,4 162,5 168,2 173,7 184,3 194,2 203,7 212,8 221,5 229,8 237,9
9.885-939.0 287 430 574 717 860 1004 1075 1147 1290 1434 1577 1721 1864 2007 2151
3,30 92,4 113,1 130,6 146,1 160,0 172,8 178,9 184,8 196,0 206,6 216,6 226,3 235,5 244,4 253,0
9.886-904.0 305 457 610 762 915 1067 1144 1220 1372 1525 1677 1830 1982 2135 2287
3,50 103,9 127,3 147,0 164,3 180,0 194,4 201,2 207,8 220,4 232,4 243,7 254,5 264,9 274,9 284,6
9.885-940.0 343 515 686 858 1029 1201 1286 1372 1544 1715 1887 2058 2230 2401 2573
3,60 109,9 134,6 155,5 173,8 190,4 205,7 212,9 219,9 233,2 245,8 257,8 269,3 280,3 290,9 301,1
9.886-903.0 363 544 726 907 1089 1270 1361 1452 1633 1815 1996 2178 2359 2541 2722
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein.
Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support.
The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
111
Round jet nozzle Form 4
Betriebsdruck: max. 1500 bar Operating pressure: max. 21750 psi
O-Ring 6.025-168.0
O-Ring muss gesondert bestellt werden. O-ring must be ordered separately.
Verwendung bei: Pistolen, Wasserwerkzeuge To use for: guns, water tools
Blinddüse 9.885-944.0 Dummy Nozzle 9.885-944.0
Düsen Nozzle
mm
Betriebsdruck / Operating pressure - bar -
200 300 400 500 600 700 750 800 900 1000 1100 1200 1300 1400 1500
Material -Nr. Material -No.
Düsendurchsatz / Flow rate - l/min Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
4,00 135,7 166,2 191,9 214,6 235,1 253,9 262,8 271,4 287,9 303,5 318,3 332,4 346,0 359,1 371,7
9.885-941.0 448 672 896 1120 1344 1568 1680 1792 2016 2240 2464 2689 2913 3137 3361
4,50 171,8 210,4 242,9 271,6 297,5 321,4 332,6 343,5 364,4 384,1 402,8 420,8 437,9 454,5 470,4
9.885-943.0 567 851 1134 1418 1701 1985 2127 2268 2552 2836 3119 3403 3686 3970 4253
5,00 212,1 259,7 299,9 335,3 367,3 396,7 410,7 424,1 449,9 474,2 497,3 519,4 540,7 561,1 580,8
9.885-942.0 700 1050 1400 1750 2100 2450 2625 2801 3151 3501 3851 4201 4551 4901 5251
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein.
Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support.
The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
112
5.1.1.2 Flat jet nozzle Form 19
Betriebsdruck: max. 1500 bar Operating pressure: max. 21750 psi
O-Ring 6.025-168.0
O-Ring muss gesondert bestellt werden. O-ring must be ordered separately.
Verwendung bei: Pistolen, Wasserwerkzeuge To use for: guns, water tools
Blinddüse 9.885-944.0
Dummy Nozzle 9.885-944.0
Düsen Nozzle
mm
Betriebsdruck / Operating pressure - bar -
Spritzwinkel Jet angle
200 300 400 500 600 700 750 800 900 1000 1100 1200 1300 1400 1500
Material-Nr. Material-No.
Düsendurchsatz / Flow rate - l/min Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
0,60-10° 2,3 2,8 3,2 3,6 3,9 4,3 4,4 4,5 4,8 5,1 5,3 5,6 5,8 6,0 6,2
6.025-457.0 8 11 15 19 23 26 28 30 34 38 41 45 49 53 56
0,60-30° 2,3 2,8 3,2 3,6 3,9 4,3 4,4 4,5 4,8 5,1 5,3 5,6 5,8 6,0 6,2
6.025-458.0 8 11 15 19 23 26 28 30 34 38 41 45 49 53 56
0,70-10° 3,1 3,8 4,4 4,9 5,4 5,8 6,0 6,2 6,6 6,9 7,3 7,6 7,9 8,2 8,5
6.025-459.0 10 15 20 26 31 36 38 41 46 51 56 61 66 72 77
0,70-20° 3,1 3,8 4,4 4,9 5,4 5,8 6,0 6,2 6,6 6,9 7,3 7,6 7,9 8,2 8,5
6.025-460.0 10 15 20 26 31 36 38 41 46 51 56 61 66 72 77
0,70-30° 3,1 3,8 4,4 4,9 5,4 5,8 6,0 6,2 6,6 6,9 7,3 7,6 7,9 8,2 8,5
6.025-461.0 10 15 20 26 31 36 38 41 46 51 56 61 66 72 77
0,80-30° 4,0 4,9 5,7 6,4 7,0 7,6 7,8 8,1 8,6 9,0 9,5 9,9 10,3 10,7 11,1
9.886-186.0 13 20 27 33 40 47 50 53 60 67 73 80 87 93 100
0,90-10° 5,1 6,3 7,2 8,1 8,9 9,6 9,9 10,2 10,9 11,4 12,0 12,5 13,0 13,5 14,0
6.025-462.0 17 25 34 42 51 59 63 68 76 84 93 101 110 118 127
0,90-20° 5,1 6,3 7,2 8,1 8,9 9,6 9,9 10,2 10,9 11,4 12,0 12,5 13,0 13,5 14,0
6.025-463.0 17 25 34 42 51 59 63 68 76 84 93 101 110 118 127
0,90-30° 5,1 6,3 7,2 8,1 8,9 9,6 9,9 10,2 10,9 11,4 12,0 12,5 13,0 13,5 14,0
6.025-464.0 17 25 34 42 51 59 63 68 76 84 93 101 110 118 127
0,90-60° 5,1 6,3 7,2 8,1 8,9 9,6 9,9 10,2 10,9 11,4 12,0 12,5 13,0 13,5 14,0
9.912-874.0 17 25 34 42 51 59 63 68 76 84 93 101 110 118 127
1,00-10° 6,3 7,7 8,9 10,0 10,9 11,8 12,2 12,6 13,4 14,1 14,8 15,5 16,1 16,7 17,3
6.025-217.0 21 31 42 52 63 73 78 83 94 104 115 125 136 146 156
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein.
Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support. The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
113
Flat jet nozzle Form 19
Betriebsdruck: max. 1500 bar Operating pressure: max. 21750 psi
Verwendung bei: Pistolen, Wasserwerkzeuge To use for: guns, water tools
Blinddüse 9.885-944.0
Dummy Nozzle 9.885-944.0
Düsen Nozzle
mm
Betriebsdruck / Operating pressure - bar -
Spritzwinkel Jet angle
200 300 400 500 600 700 750 800 900 1000 1100 1200 1300 1400 1500
Material-Nr. Material-No.
Düsendurchsatz / Flow rate - l/min Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
1,00-20° 6,3 7,7 8,9 10,0 10,9 11,8 12,2 12,6 13,4 14,1 14,8 15,5 16,1 16,7 17,3
6.025-214.0 21 31 42 52 63 73 78 83 94 104 115 125 136 146 156
1,00-30° 6,3 7,7 8,9 10,0 10,9 11,8 12,2 12,6 13,4 14,1 14,8 15,5 16,1 16,7 17,3
6.025-215.0 21 31 42 52 63 73 78 83 94 104 115 125 136 146 156
1,00-40° 6,3 7,7 8,9 10,0 10,9 11,8 12,2 12,6 13,4 14,1 14,8 15,5 16,1 16,7 17,3
6.025-216.0 21 31 42 52 63 73 78 83 94 104 115 125 136 146 156
1,00-60° 6,3 7,7 8,9 10,0 10,9 11,8 12,2 12,6 13,4 14,1 14,8 15,5 16,1 16,7 17,3
9.886-163.0 21 31 42 52 63 73 78 83 94 104 115 125 136 146 156
1,10-10° 7,6 9,4 10,8 12,1 13,2 14,3 14,8 15,3 16,2 17,1 17,9 18,7 19,5 20,2 20,9
6.025-465.0 25 38 50 63 76 88 95 101 114 126 139 151 164 177 189
1,10-20° 7,6 9,4 10,8 12,1 13,2 14,3 14,8 15,3 16,2 17,1 17,9 18,7 19,5 20,2 20,9
6.025-466.0 25 38 50 63 76 88 95 101 114 126 139 151 164 177 189
1,10-30° 7,6 9,4 10,8 12,1 13,2 14,3 14,8 15,3 16,2 17,1 17,9 18,7 19,5 20,2 20,9
6.025-467.0 25 38 50 63 76 88 95 101 114 126 139 151 164 177 189
1,20-10° 9,1 11,1 12,9 14,4 15,8 17,0 17,6 18,2 19,3 20,3 21,3 22,3 23,2 24,1 24,9
6.025-206.0 30 45 60 75 90 105 113 120 135 150 165 180 195 210 225
1,20-20° 9,1 11,1 12,9 14,4 15,8 17,0 17,6 18,2 19,3 20,3 21,3 22,3 23,2 24,1 24,9
6.025-207.0 30 45 60 75 90 105 113 120 135 150 165 180 195 210 225
1,20-30° 9,1 11,1 12,9 14,4 15,8 17,0 17,6 18,2 19,3 20,3 21,3 22,3 23,2 24,1 24,9
6.025-208.0 30 45 60 75 90 105 113 120 135 150 165 180 195 210 225
1,20-45° 9,1 11,1 12,9 14,4 15,8 17,0 17,6 18,2 19,3 20,3 21,3 22,3 23,2 24,1 24,9
6.025-209.0 30 45 60 75 90 105 113 120 135 150 165 180 195 210 225
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein.
Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support. The max. permissible recoil force for manual operation must not exceed 250 N.
O-Ring 6.025-168.0
O-Ring muss gesondert bestellt werden. O-ring must be ordered separately
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
114
Flat jet nozzle Form 19
Betriebsdruck: max. 1500 bar Operating pressure: max. 21750 psi
Verwendung bei: Pistolen, Wasserwerkzeuge To use for: guns, water tools
Blinddüse 9.885-944.0
Dummy Nozzle 9.885-944.0
Düsen Nozzle
mm
Betriebsdruck / Operating pressure - bar -
Spritzwinkel Jet angle
200 300 400 500 600 700 750 800 900 1000 1100 1200 1300 1400 1500
Material-Nr. Material-No.
Düsendurchsatz / Flow rate - l/min Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
1,20-60° 9,1 11,1 12,9 14,4 15,8 17,0 17,6 18,2 19,3 20,3 21,3 22,3 23,2 24,1 24,9
9.886-164.0 30 45 60 75 90 105 113 120 135 150 165 180 195 210 225
1,30-10° 10,7 13,1 15,1 16,9 18,5 20,0 20,7 21,3 22,6 23,9 25,0 26,1 27,2 28,2 29,2
6.025-468.0 35 53 70 88 106 123 132 141 159 176 194 211 229 247 264
1,30-30° 10,7 13,1 15,1 16,9 18,5 20,0 20,7 21,3 22,6 23,9 25,0 26,1 27,2 28,2 29,2
6.025-469.0 35 53 70 88 106 123 132 141 159 176 194 211 229 247 264
1,30-40° 10,7 13,1 15,1 16,9 18,5 20,0 20,7 21,3 22,6 23,9 25,0 26,1 27,2 28,2 29,2
9.886-184.0 35 53 70 88 106 123 132 141 159 176 194 211 229 247 264
1,40-10° 12,4 15,2 17,5 19,6 21,4 23,2 24,0 24,8 26,3 27,7 29,0 30,3 31,6 32,7 33,9
6.025-210.0 41 61 82 102 123 143 153 163 184 204 225 245 266 286 306
1,40-20° 12,4 15,2 17,5 19,6 21,4 23,2 24,0 24,8 26,3 27,7 29,0 30,3 31,6 32,7 33,9
6.025-211.0 41 61 82 102 123 143 153 163 184 204 225 245 266 286 306
1,40-30° 12,4 15,2 17,5 19,6 21,4 23,2 24,0 24,8 26,3 27,7 29,0 30,3 31,6 32,7 33,9
6.025-212.0 41 61 82 102 123 143 153 163 184 204 225 245 266 286 306
1,40-60° 12,4 15,2 17,5 19,6 21,4 23,2 24,0 24,8 26,3 27,7 29,0 30,3 31,6 32,7 33,9
6.025-213.0 41 61 82 102 123 143 153 163 184 204 225 245 266 286 306
1,50-10° 14,2 17,4 20,1 22,5 24,6 26,6 27,5 28,4 30,1 31,8 33,3 34,8 36,2 37,6 38,9
6.025-201.0 47 70 94 117 141 164 176 188 211 235 258 281 305 328 352
1,50-15° 14,2 17,4 20,1 22,5 24,6 26,6 27,5 28,4 30,1 31,8 33,3 34,8 36,2 37,6 38,9
6.025-202.0 47 70 94 117 141 164 176 188 211 235 258 281 305 328 352
1,50-20° 14,2 17,4 20,1 22,5 24,6 26,6 27,5 28,4 30,1 31,8 33,3 34,8 36,2 37,6 38,9
6.025-203.0 47 70 94 117 141 164 176 188 211 235 258 281 305 328 352
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein.
Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support. The max. permissible recoil force for manual operation must not exceed 250 N.
O-Ring 6.025-168.0
O-Ring muss gesondert bestellt werden. O-ring must be ordered separately
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
115
Flat jet nozzle Form 19
Betriebsdruck: max. 1500 bar Operating pressure: max. 21750 psi
Verwendung bei: Pistolen, Wasserwerkzeuge To use for: guns, water tools
Blinddüse 9.885-944.0
Dummy Nozzle 9.885-944.0
Düsen Nozzle
mm
Betriebsdruck / Operating pressure - bar -
Spritzwinkel Jet angle
200 300 400 500 600 700 750 800 900 1000 1100 1200 1300 1400 1500
Material-Nr. Material-No.
Düsendurchsatz / Flow rate - l/min Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
1,50-30° 14,2 17,4 20,1 22,5 24,6 26,6 27,5 28,4 30,1 31,8 33,3 34,8 36,2 37,6 38,9
6.025-204.0 47 70 94 117 141 164 176 188 211 235 258 281 305 328 352
1,50-40° 14,2 17,4 20,1 22,5 24,6 26,6 27,5 28,4 30,1 31,8 33,3 34,8 36,2 37,6 38,9
6.025-205.0 47 70 94 117 141 164 176 188 211 235 258 281 305 328 352
1,50-45° 14,2 17,4 20,1 22,5 24,6 26,6 27,5 28,4 30,1 31,8 33,3 34,8 36,2 37,6 38,9
9.886-173.0 47 70 94 117 141 164 176 188 211 235 258 281 305 328 352
1,50-60° 14,2 17,4 20,1 22,5 24,6 26,6 27,5 28,4 30,1 31,8 33,3 34,8 36,2 37,6 38,9
9.886-169.0 47 70 94 117 141 164 176 188 211 235 258 281 305 328 352
1,60-10° 16,2 19,8 22,5 25,6 28,0 30,2 31,3 32,3 34,3 36,1 37,9 39,6 41,2 42,8 44,3
9.909-586.0 53 80 107 133 160 187 200 213 240 267 294 320 347 374 400
1,60-20°- 16,2 19,8 22,5 25,6 28,0 30,2 31,3 32,3 34,3 36,1 37,9 39,6 41,2 42,8 44,3
9.886-180.0 53 80 107 133 160 187 200 213 240 267 294 320 347 374 400
1,60-30° 16,2 19,8 22,5 25,6 28,0 30,2 31,3 32,3 34,3 36,1 37,9 39,6 41,2 42,8 44,3
9.886-181.0 53 80 107 133 160 187 200 213 240 267 294 320 347 374 400
1,70-10° 18,2 22,4 25,8 28,9 31,6 34,1 35,3 36,5 38,7 40,8 42,8 44,7 46,5 48,3 50,0
9.886-168.0 60 90 121 151 181 211 226 241 271 301 331 362 392 422 452
1,70-20° 18,2 22,4 25,8 28,9 31,6 34,1 35,3 36,5 38,7 40,8 42,8 44,7 46,5 48,3 50,0
9.886-153.0 60 90 121 151 181 211 226 241 271 301 331 362 392 422 452
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein.
Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support. The max. permissible recoil force for manual operation must not exceed 250 N.
O-Ring 6.025-168.0
O-Ring muss gesondert bestellt werden. O-ring must be ordered separately
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
116
Flat jet nozzle Form 19 Betriebsdruck: max. 1500 bar Operating pressure: max. 21750 psi
.
Verwendung bei: Pistolen, Wasserwerkzeuge To use for: guns, water tools
Blinddüse 9.885-944.0
Dummy Nozzle 9.885-944.0
Düsen Nozzle
mm
Betriebsdruck / Operating pressure - bar -
Spritzwinkel Jet angle
200 300 400 500 600 700 750 800 900 1000 1100 1200 1300 1400 1500
Material-Nr. Material-No.
Düsendurchsatz / Flow rate - l/min Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
1,70-30° 18,2 22,4 25,8 28,9 31,6 34,1 35,3 36,5 38,7 40,8 42,8 44,7 46,5 48,3 50,0
9.886-152.0 60 90 121 151 181 211 226 241 271 301 331 362 392 422 452
1,70-60° 18,2 22,4 25,8 28,9 31,6 34,1 35,3 36,5 38,7 40,8 42,8 44,7 46,5 48,3 50,0
9.886-167.0 60 90 121 151 181 211 226 241 271 301 331 362 392 422 452
1,80-10° 20,5 25,1 28,9 32,4 35,4 38,3 39,6 40,9 43,4 45,7 48,0 50,1 52,2 54,1 56,0
9.886-161.0 68 101 135 169 203 236 253 270 304 338 372 405 439 473 507
1,80-20° 20,5 25,1 28,9 32,4 35,4 38,3 39,6 40,9 43,4 45,7 48,0 50,1 52,2 54,1 56,0
9.886-157.0 68 101 135 169 203 236 253 270 304 338 372 405 439 473 507
1,80-30° 20,5 25,1 28,9 32,4 35,4 38,3 39,6 40,9 43,4 45,7 48,0 50,1 52,2 54,1 56,0
9.886-154.0 68 101 135 169 203 236 253 270 304 338 372 405 439 473 507
1,80-40° 20,5 25,1 28,9 32,4 35,4 38,3 39,6 40,9 43,4 45,7 48,0 50,1 52,2 54,1 56,0
9.886-162.0 68 101 135 169 203 236 253 270 304 338 372 405 439 473 507
1,80-60° 20,5 25,1 28,9 32,4 35,4 38,3 39,6 40,9 43,4 45,7 48,0 50,1 52,2 54,1 56,0
9.886-172.0 68 101 135 169 203 236 253 270 304 338 372 405 439 473 507
1,90-30° 22,8 27,9 32,2 36,0 39,5 42,6 44,1 45,6 48,4 51,0 53,5 55,8 58,1 60,3 62,4
9.886-909.0 75 113 151 188 226 263 282 301 339 376 414 452 489 527 564
1,90-60° 22,8 27,9 32,2 36,0 39,5 42,6 44,1 45,6 48,4 51,0 53,5 55,8 58,1 60,3 62,4
9.886-166.0 75 113 151 188 226 263 282 301 339 376 414 452 489 527 564
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein. Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support. The max. permissible recoil force for manual operation must not exceed 250 N.
O-Ring muss gesondert bestellt werden. O-ring must be ordered separately
O-Ring 6.025-168.0
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
117
Flat jet nozzle Form 19
Betriebsdruck: max. 1500 bar Operating pressure: max. 21750 psi
Verwendung bei: Pistolen, Wasserwerkzeuge To use for: guns, water tools
Blinddüse 9.885-944.0
Dummy Nozzle 9.885-944.0
Düsen Nozzle
mm
Betriebsdruck / Operating pressure - bar -
Spritzwinkel Jet angle
200 300 400 500 600 700 750 800 900 1000 1100 1200 1300 1400 1500
Material-Nr. Material-No.
Düsendurchsatz / Flow rate - l/min Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
2,00-20° 25,3 30,9 35,7 39,9 43,8 47,3 48,9 50,5 53,6 56,5 59,2 61,9 64,4 66,8 69,2
9.886-145.0 83 125 167 208 250 292 313 334 375 417 459 500 542 584 625
2,00-30° 25,3 30,9 35,7 39,9 43,8 47,3 48,9 50,5 53,6 56,5 59,2 61,9 64,4 66,8 69,2
9.886-146.0 83 125 167 208 250 292 313 334 375 417 459 500 542 584 625
2,00-45° 25,3 30,9 35,7 39,9 43,8 47,3 48,9 50,5 53,6 56,5 59,2 61,9 64,4 66,8 69,2
9.886-158.0 83 125 167 208 250 292 313 334 375 417 459 500 542 584 625
2,00-60° 25,3 30,9 35,7 39,9 43,8 47,3 48,9 50,5 53,6 56,5 59,2 61,9 64,4 66,8 69,2
9.909-585.0 83 125 167 208 250 292 313 334 375 417 459 500 542 584 625
2,10-60° 27,8 34,1 39,4 44,0 48,2 52,1 53,9 55,7 59,1 62,3 65,3 68,2 71,0 73,7 76,3
9.886-165.0 92 138 184 230 276 322 345 368 414 460 506 552 598 644 690
2,20-10° 30,6 37,4 43,2 48,3 52,9 57,2 59,2 61,1 64,8 68,3 71,7 74,9 77,9 80,9 83,8
9.886-182.0 101 151 202 252 303 353 378 404 454 505 555 605 656 706 757
2,20-20° 30,6 37,4 43,2 48,3 52,9 57,2 59,2 61,1 64,8 68,3 71,7 74,9 77,9 80,9 83,8
9.886-147.0 101 151 202 252 303 353 378 404 454 505 555 605 656 706 757
2,20-30° 30,6 37,4 43,2 48,3 52,9 57,2 59,2 61,1 64,8 68,3 71,7 74,9 77,9 80,9 83,8
9.886-148.0 101 151 202 252 303 353 378 404 454 505 555 605 656 706 757
2,20-45° 30,6 37,4 43,2 48,3 52,9 57,2 59,2 61,1 64,8 68,3 71,7 74,9 77,9 80,9 83,8
9.909-584.0 101 151 202 252 303 353 378 404 454 505 555 605 656 706 757
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein.
Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support. The max. permissible recoil force for manual operation must not exceed 250 N.
O-Ring muss gesondert bestellt werden. O-ring must be ordered separately
O-Ring 6.025-168.0
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
118
Flat jet nozzle Form 19
Betriebsdruck: max. 1500 bar Operating pressure: max. 21750 psi
Verwendung bei: Pistolen, Wasserwerkzeuge To use for: guns, water tools
Blinddüse 9.885-944.0
Dummy Nozzle 9.885-944.0
Düsen Nozzle
mm
Betriebsdruck / Operating pressure - bar -
Spritzwinkel Jet angle
200 300 400 500 600 700 750 800 900 1000 1100 1200 1300 1400 1500
Material-Nr. Material-No.
Düsendurchsatz / Flow rate - l/min Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
2,20-45° 30,6 37,4 43,2 48,3 52,9 57,2 59,2 61,1 64,8 68,3 71,7 74,9 77,9 80,9 83,8
9.886-175.0 101 151 202 252 303 353 378 404 454 505 555 605 656 706 757
2,20-60° 30,6 37,4 43,2 48,3 52,9 57,2 59,2 61,1 64,8 68,3 71,7 74,9 77,9 80,9 83,8
9.886-912.0 101 151 202 252 303 353 378 404 454 505 555 605 656 706 757
2,40-25° 36,4 44,5 51,4 57,5 63,0 68,0 70,4 72,7 77,2 81,3 85,3 89,1 92,7 96,2 99,6
9.886-906.0 120 180 240 300 360 420 450 480 540 600 660 721 781 841 901
2,50-20° 39,5 48,3 55,8 62,4 68,4 73,8 76,4 78,9 83,7 88,3 92,6 96,7 100,6 104,4 108,1
9.886-155.0 130 195 261 326 391 456 489 521 586 652 717 782 847 912 977
2,50-30° 39,5 48,3 55,8 62,4 68,4 73,8 76,4 78,9 83,7 88,3 92,6 96,7 100,6 104,4 108,1
9.886-149.0 130 195 261 326 391 456 489 521 586 652 717 782 847 912 977
2,50-45° 39,5 48,3 55,8 62,4 68,4 73,8 76,4 78,9 83,7 88,3 92,6 96,7 100,6 104,4 108,1
9.886-160.0 130 195 261 326 391 456 489 521 586 652 717 782 847 912 977
2,70-60° 46,0 56,4 65,1 72,8 79,7 86,1 89,1 92,1 97,7 102,9 108,0 112,8 117,4 121,8 126,1
9.886-170.0 152 228 304 380 456 532 570 608 684 760 836 912 988 1064 1140
3,00-30° 56,8 69,6 80,4 89,9 98,4 106,3 110,1 113,7 120,6 127,1 133,3 139,2 144,9 150,4 155,6
9.886-150.0 188 281 375 469 563 657 704 751 844 938 1032 1126 1220 1313 1407
3,00-45° 56,8 69,6 80,4 89,9 98,4 106,3 110,1 113,7 120,6 127,1 133,3 139,2 144,9 150,4 155,6
9.886-151.0 188 281 375 469 563 657 704 751 844 938 1032 1126 1220 1313 1407
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein.
Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support. The max. permissible recoil force for manual operation must not exceed 250 N.
O-Ring muss gesondert bestellt werden. O-ring must be ordered separately
O-Ring 6.025-168.0
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
119
5.1.2 Up to 3000 bar
5.1.2.1 Flat jet nozzle Form 8
Betriebsdruck: max. 3000 bar
Operating pressure: max. 43500 psi
Backring MN 9.881-785.0 O-Ring MN 9.881-784.0
O-Ring und Back-Ring müssen gesondert bestellt werden.
O-ring and backring must be ordered separately.
Verwendung bei: Pistolen, Wasserwerkzeuge
To use for: guns, water tools
Blinddüse MN 9.885-868.0
Dummy Nozzle MN 9.885-868.0
Düsen Nozzle
mm
Material-Nr. Material-No
Betriebsdruck / Operating pressure - bar -
1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000
Düsendurchsatz / Flow rate - l/min Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
0,70-10°
9.886-056.0
9,0 9,3 9,5 9,8 10,0 10,3 10,5 10,7 10,9 11,2 11,4 11,6 11,8 12,0
87 92 97 102 107 112 117 123 128, 133 138 143 148 153
0,80-10°
9.886-041.0
11,8 12,1 12,5 12,8 13,1 13,4 13,7 14,0 14,3 14,6 14,8 15,1 15,4 15,7
113 120 127 133 140 147 153 160 167 173 180 187 193 200
0,80-20°
9.886-057.0
11,8 12,1 12,5 12,8 13,1 13,4 13,7 14,0 14,3 14,6 14,8 15,1 15,4 15,7
113 120 127 133 140 147 153 160 167 173 180 187 193 200
0,90-10°
9.909-579.0
14,9 15,3 15,8 16,2 16,6 17,0 17,3 17,7 18,1 18,4 18,8 19,1 19,5 19,8
144 152 160 169 177 186 194 203 211 220 228 236 245 253
1,00-10°
9.886-043.0
18,4 18,9 19,5 20,0 20,5 20,9 21,4 21,9 22,3 22,8 23,2 23,6 24,0 24,5
177 188 198 208 219 229 240 250 261 271 281 292 302 313
1,00-20°
9.886-023.0
18,4 18,9 19,5 20,0 20,5 20,9 21,4 21,9 22,3 22,5 23,2 23,6 24,0 24,5
177 188 198 208 219 229 240 250 261 268 281 292 302 313
1,10-10°
9.909-580.0
22,3 22,9 23,6 24,2 24,8 25,3 25,9 26,5 27,0 27,5 28,1 28,6 29,1 29,6
214 227 240 252 265 277 290 303 315 328 341 353 366 378
1,10-20°
9.886-024.0
22,3 22,9 23,6 24,2 24,8 25,3 25,9 26,5 27,0 27,5 28,1 28,6 29,1 29,6
214 227 240 252 265 277 290 303 315 328 341 353 366 378
1,20-20°
9.909-576.0
26,5 27,3 28,0 28,8 29,5 392 30,9 31,5 32,1 32,8 33,4 34,0 34,6 35,2
255 270 285 300 315 330 345 360 375 390 405 420 435 450
1,30-10°
9.886-046.0
31,1 32,0 32,9 33,7 34,6 35,4 36,2 37,0 37,7 38,5 39,2 39,9 40,6 41,3
299 317 335 352 370 388 405 423 440 458 476 493 511 529
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein.
Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support. The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
120
Flat jet nozzle Form 8
Betriebsdruck: max. 3000 bar
Operating pressure: max. 43500 psi
Backring MN 9.881-785.0 O-Ring MN 9.881-784.0
O-Ring und Back-Ring müssen gesondert bestellt werden.
O-ring and backring must be ordered separately.
Verwendung bei: Pistolen, Wasserwerkzeuge
To use for: guns, water tools
Blinddüse MN 9.885-868.0
Dummy Nozzle MN 9.885-868.0
Düsen Nozzle
mm
Material-Nr. Material-No
Betriebsdruck / Operating pressure - bar -
1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000
Düsendurchsatz / Flow rate - l/min Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
1,30-20°
9.886-026.0
31,1 32,0 32,9 33,7 34,6 35,4 36,2 37,9 37,7 38,5 39,2 39,9 40,6 41,3
299 317 335 352 370 388 405 423 440 458 476 493 511 529
1,40-10°
9.886-026.0
36,1 37,1 38,1 39,1 40,1 41,0 42,0 42,9 43,8 44,6 45,5 46,3 47,1 47,9
347 368 388 409 429 449 470 490 511 531 552 572 593 613
1,40-20°
9.886-027.0
36,1 37,1 38,1 39,1 40,1 41,0 42,0 42,9 43,8 44,6 45,5 46,3 47,1 47,9
347 368 388 409 429 449 470 490 511 531 552 572 593 613
1,50-10°
9.909-582.0
41,4 42,6 43,8 44,9 46,0 47,1 48,2 49,2 50,2 51,2 52,2 53,2 54,1 55,0
399 422 446 469 493 516 539 563 586 610 633 657 680 704
1,50-20°
9.909-577.0
41,4 42,6 43,8 44,9 46,0 47,1 48,2 49,2 50,2 51,2 52,2 53,2 54,1 55,0
399 422 446 469 493 516 539 563 586 610 633 657 680 704
1,60-10°
9.886-049.0
47,1 48,5 49,8 51,1 52,4 53,6 54,8 56,0 57,2 58,3 59,4 60,5 61,6 62,6
454 480 507 534 560 587 614 640 667 694 721 747 774 801
1,60-20°
9.886-029.0
47,1 48,5 49,8 51,1 52,4 53,6 54,8 56,0 57,2 58,3 59,4 60,5 61,6 62,6
454 480 507 534 560 587 614 640 667 694 721 747 774 801
1,70-10°
9.886-050.0
53,2 54,7 56,2 57,7 59,1 60,5 61,9 63,2 64,5 65,8 67,1 68,3 69,5 70,7
512 542 572 603 633 663 693 723 753 783 813 844 874 904
1,70-20°
9.909-578.0
53,2 54,7 56,2 57,7 59,1 60,5 61,9 63,2 64,5 65,8 67,1 68,3 69,5 70,7
512 542 572 603 633 663 693 723 753 783 813 844 874 904
1,80-10°
9.886-051.0
59,7 61,4 63,1 64,7 66,3 67,9 69,4 70,9 72,3 73,8 75,2 76,6 77,9 79,2
574 608 642 675 709 743 777 811 844 878 912 946 979 1013
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein.
Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support. The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
121
Flat jet nozzle Form 8
Betriebsdruck: max. 3000 bar
Operating pressure: max. 36250 psi
Backring MN 9.881-785.0 O-Ring MN 9.881-784.0
O-Ring und Back-Ring müssen gesondert bestellt werden.
O-ring and backring must be ordered separately.
Verwendung bei: Pistolen, Wasserwerkzeuge
To use for: guns, water tools
Blinddüse MN 9.885-868.0
Dummy Nozzle MN 9.885-868.0
Düsen Nozzle
mm
Material-Nr. Material-No
Betriebsdruck / Operating pressure - bar -
1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000
Düsendurchsatz / Flow rate - l/min Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
1,80-20°
9.886-031.0
59,7 61,4 63,1 64,7 66,3 67,9 69,4 70,9 72,3 73,8 75,2 76,6 77,9 79,2
574 608 642 675 709 743 777 811 844 878 912 946 979 1013
1,90-10°
9.899-602.0
66,5 68,4 70,3 72,1 73,9 75,6 77,3 79,0 80,6 82,2 83,8 85,3 86,8 88,3
640 677 715 753 790 828 866 903 941 978 1016 1054 1091 1129
1,90-20°
9.886-032.0
66,5 68,4 70,3 72,1 73,9 75,6 77,3 79,0 80,6 82,2 83,8 85,3 86,8 88,3
640 677 715 753 790 828 866 903 941 978 1016 1054 1091 1129
2,00-10°
9.886-052.0
73,6 75,8 77,9 79,9 81,8 83,8 85,7 87,5 89,3 91,1 92,8 94,5 96,2 97,8
709 751 792 834 876 917 959 1001 1042 1084 1126 1168 1209 1251
2,00-20°
9.886-033.0
73,6 75,8 77,9 79,9 81,8 83,8 85,7 87,5 89,3 91,1 92,8 94,5 96,2 97,8
709 751 792 834 876 917 959 1001 1042 1084 1126 1168 1209 1251
2,10-20°
9.886-034.0
81,2 83,5 85,8 88,1 90,2 92,4 94,4 96,5 98,5 99,4 102,3 104,2 106,0 107,9
782 827 873 919 965 1011 1057 1103 1149 1183 1241 1287 1333 1379
2,20-10°
9.886-053.0
89,1 91,7 94,2 96,7 99,0 101,4 103,6 105,9 108,1 110,2 112,3 114,4 116,4 118,4
858 908 959 1009 1060 1110 1160 1211 1261 1312 1362 1413 1463 1514
2,20-20°
9.886-035.0
89,1 91,7 94,2 96,7 99,0 101,4 103,6 105,9 108,1 110,2 112,3 114,4 116,4 118,4
858 908 959 1009 1060 1110 1160 1211 1261 1312 1362 1413 1463 1514
2,30-10°
9.886-054.0
97,4 100,2 103,0 105,6 108,2 110,8 113,3 115,7 118,1 120,4 122,7 125,0 127,2 129,4
937 993 1048 1103 1158 1213 1268 1323 1379 1434 1489 1544 1599 1654
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein.
Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support. The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
122
Flat jet nozzle Form 8
Betriebsdruck: max. 3000 bar
Operating pressure: max. 36250 psi
Backring MN 9.881-785.0 O-Ring MN 9.881-784.0
O-Ring und Back-Ring müssen gesondert bestellt werden.
O-ring and backring must be ordered separately.
Verwendung bei: Pistolen, Wasserwerkzeuge
To use for: guns, water tools
Blinddüse MN 9.885-868.0
Dummy Nozzle MN 9.885-868.0
Düsen Nozzle
mm
Material-Nr. Material-No.
Betriebsdruck / Operating pressure - bar -
1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000
Düsendurchsatz / Flow rate - l/min Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
2,40-10°
9.886-055.0
106,0 109,1 112,1 115,0 117,9 120,6 123,3 126,0 128,6 131,1 133,6 136,1 138,5 140,9
1021 1081 1141 1201 1261 1321 1381 1441 1501 1561 1621 1681 1741 1801
2,40-20°
9.886-036.0
106,0 109,1 112,1 115,0 117,9 120,6 123,3 126,0 128,6 131,1 133,6 136,1 138,5 140,9
1021 1081 1141 1201 1261 1321 1381 1441 1501 1561 1621 1681 1741 1801
2,50-10°
340.0866
115,1 118,4 121,6 124,8 127,9 130,9 133,8 136,7 139,5 142,3 145,0 147,7 150,3 152,9
1108 1173 1238 1303 1368 1433 1498 1564 1629 1694 1759 1824 1889 1955
2,50-20°
9.886-037.0
115,1 118,4 121,6 124,8 127,9 130,9 133,8 136,7 139,5 142,3 145,0 147,7 150,3 152,9
1108 1173 1238 1303 1368 1433 1498 1564 1629 1694 1759 1824 1889 1955
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein.
Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support. The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
123
5.1.2.2 Round jet nozzle Form 1
Betriebsdruck: max. 3000 bar Operating pressure: max. 43500 psi
Backring O-Ring MN 9.881-785.0 MN 9.881-784.0
Backring und O-Ring müssen gesondert bestellt werden. Backring and o-ring must be ordered separately
Verwendung bei: Pistolen, Wasserwerkzeuge To use for: guns, water tools
Blinddüse MN 9.885-868.0 Dummy Nozzle MN 9.885-868.0
Düsen Nozzle
mm Betriebsdruck / Operating pressure - bar -
1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000
Material-Nr. Material-No. Düsendurchsatz / Flow rate - l/min
Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
0,40 3,8 4,0 4,1 4,2 4,3 4,4 4,5 4,6 4,7 4,8 4,9 5,0 5,1 5,2 5,3
9.885-871.0 36 38 40 43 45 47 49 52 54 56 58 60 63 65 67
0,45 4,9 5,0 5,2 5,3 5,4 5,6 5,7 5,8 6,0 6,1 6,2 6,3 6,4 6,5 6,7
9.899-592.0 45 48 51 54 57 60 62 65 68 71 74 77 79 82 85
0,50 6,0 6,2 6,4 6,5 6,7 6,9 7,0 7,2 7,3 7,5 7,6 7,8 7,9 8,1 8,2
9.885-890.0 56 60 63 67 70 74 77 81 84 88 91 95 98 102 105
0,60 8,6 8,9 9,2 9,4 9,7 9,9 10,1 10,4 10,6 10,8 11,0 11,2 11,4 11,6 11,8
9.885-855.0 81 86 91 96 101 106 111 116 121 126 131 136 141 146 151
0,70 11,8 12,1 12,5 12,8 13,1 13,5 13,8 14,1 14,4 14,7 15,0 15,3 15,6 15,8 16,1
9.885-891.0 110 117 124 130 137 144 151 158 158 172 178 185 192 199 206
0,80 15,4 15,8 16,3 16,7 17,2 17,6 18,0 18,4 18,8 19,2 19,4 19,9 20,3 20,7 21,0
9.885-856.0 143 152 161 170 179 188 197 206 215 224 231 242 251 260 269
0,90 19,4 20,0 20,6 21,2 21,7 22,3 22,8 23,3 23,8 24,3 24,8 25,2 25,7 26,2 26,6
9.885-886.0 181 193 204 216 227 238 250 261 272 284 295 306 318 329 340
1,00 24,0 24,7 25,4 26,1 26,8 27,5 28,1 28,8 29,4 30,0 30,6 31,2 31,7 32,3 32,9
9.885-857.0 224 238 252 266 280 294 308 322 336 350 364 378 392 406 420
1,10 29,0 29,9 30,8 31,6 32,5 33,3 34,0 34,8 35,6 36,3 37,0 37,7 38,4 39,1 39,8
9.885-858.0 271 288 305 322 339 356 373 390 407 424 441 457 474 491 508
1,20 34,5 35,6 36,6 37,6 38,6 39,6 40,5 41,4 42,3 43,2 44,0 44,9 45,7 46,5 47,3
9.885-859.0 323 343 363 383 403 423 444 464 484 504 524 544 565 585 605
1,30 40,5 41,8 43,0 44,2 45,3 46,5 47,5 48,6 49,7 50,7 51,7 52,7 53,6 54,6 55,5
9.885-860.0 379 402 426 450 473 497 521 544 568 592 615 639 663 686 710
1,40 47,0 48,5 49,9 51,2 52,6 53,9 55,1 56,4 57,6 58,8 59,9 61,1 62,2 63,3 64,4
9.885-861.0 439 467 494 521 549 576 604 631 659 686 714 741 768 796 823
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein. Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support. The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
124
Round jet nozzle Form 1
Betriebsdruck: max. 3000 bar Operating pressure: max. 43500 psi
Backring O-Ring MN 9.881-785.0 MN 9.881-784.0
Backring und O-Ring müssen gesondert bestellt werden. Backring and o-ring must be ordered separately
Verwendung bei: Pistolen, Wasserwerkzeuge To use for: guns, water tools
Blinddüse MN 9.885-868.0 Dummy Nozzle MN 9.885-868.0
Düsen Nozzle
mm Betriebsdruck / Operating pressure - bar -
1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000
Material-Nr. Material-No. Düsendurchsatz / Flow rate - l/min
Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
1,50 54,0 55,6 57,3 58,8 60,4 61,8 63,3 64,7 66,1 67,5 68,8 70,1 71,4 72,7 73,9
9.909-570.0 504 536 567 599 630 662 693 725 756 788 819 851 882 914 945
1,60 61,4 63,3 65,1 66,9 68,7 70,4 72,0 73,6 75,2 76,8 78,3 79,8 81,3 82,7 84,1
9.885-863.0 574 609 645 681 717 753 789 824 860 896 932 968 1004 1040 1075
1,70 69,3 71,5 73,5 75,6 77,5 79,4 81,3 83,1 84,9 86,7 88,4 90,1 91,7 93,3 94,9
9.885-864.0 647 688 728 769 809 850 890 931 971 1012 1052 1093 1133 1174 1214
1,80 77,7 80,1 82,5 84,7 86,9 89,1 91,2 93,2 95,2 97,2 99,1 101,0 102,8 104,7 106,4
9.885-865.0 726 771 817 862 907 953 998 1043 1089 1134 1180 1225 1270 1316 1361
1,90 86,6 89,3 91,9 94,4 96,8 99,2 101,6 103,8 106,1 108,3 110,4 112,5 114,6 116,6 118,6
9.885-866.0 809 859 910 960 1011 1062 1112 1163 1213 1264 1314 1365 1415 1466 1516
2,00 96,0 98,9 101,8 104,6 107,3 109,9 112,5 115,1 117,5 120,0 121,1 124,7 127,0 129,2 131,4
9.909-571.0 896 952 1008 1064 1120 1176 1232 1288 1344 1400 1442 1512 1568 1624 1680
2,10 105,8 109,1 112,2 115,3 118,3 121,2 124,1 126,9 129,6 132,3 134,9 137,4 140,0 142,4 144,9
9.885-870.0 988 1050 1112 1173 1235 1297 1359 1420 1482 1544 1606 1667 1729 1791 1853
2,20 116,1 119,7 123,2 126,5 129,8 133,0 136,2 139,2 142,2 145,2 148,0 150,8 153,6 156,3 159,0
9.885-869.0 1084 1152 1220 1288 1355 1423 1491 1559 1627 1694 1762 1830 1898 1965 2033
2,30 126,9 130,8 134,6 138,3 141,9 145,4 148,8 152,2 155,4 158,6 161,8 164,9 167,9 170,9 173,8
9.885-872.0 1185 1259 1333 1407 1481 1556 1630 1704 1778 1852 1926 2000 2074 2148 2222
2,40 138,2 142,4 146,6 150,6 154,5 158,3 162,0 165,7 169,3 172,7 176,2 179,5 182,8 186,1 189,2
9.885-873.0 1290 1371 1452 1532 1613 1694 1774 1855 1936 2016 2097 2178 2258 2339 2420
2,50 150,0 154,6 159,0 163,4 167,7 171,8 175,8 179,8 183,7 187,4 191,2 194,8 198,4 201,9 205,3
9.885-874.0 1400 1488 1575 1663 1750 1838 1925 2013 2100 2188 2275 2363 2450 2538 2625
2,60 162,2 167,2 172,0 176,7 181,3 185,8 190,2 194,5 198,6 202,7 206,7 210,7 214,6 218,4 222,1
9.885-875.0 1515 1609 1704 1799 1893 1988 2082 2177 2272 2366 2461 2556 2650 2745 2840
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein. Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support. The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
125
Round jet nozzle Form 1
Betriebsdruck: max. 3000 bar Operating pressure: max. 43500 psi
Backring O-Ring MN 9.881-785.0 MN 9.881-784.0
Backring und O-Ring müssen gesondert bestellt werden. Backring and o-ring must be ordered separately
Verwendung bei: Pistolen, Wasserwerkzeuge To use for: guns, water tools
Blinddüse MN 9.885-868.0 Dummy Nozzle MN 9.885-868.0
Düsen Nozzle
mm Betriebsdruck / Operating pressure - bar -
1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000
Material-Nr. Material-No. Düsendurchsatz / Flow rate - l/min
Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
2,70 175 180 186 191 196 200,4 205,1 209,7 214,2 218,6 223,0 227,2 231,4 235,5 239,5
9.885-876.0 1633 1735 1837 1940 2042 2144 2246 2348 2450 2552 2654 2756 2858 2960 3062
2,80 188 194 200 205 210 215,5 220,6 225,5 230,4 235,1 239,8 244,3 248,8 253,2 257,6
9.885-877.0 1756 1866 1976 2086 2196 2305 2415 2525 2635 2745 2854 2964 3074 3184 3293
2,90 202 208 214 220 226 231,2 236,6 241,9 247,1 252,2 257,2 262,1 266,9 271,6 276,3
9.885-878.0 1884 2002 2120 2237 2355 2473 2591 2709 2826 2944 3062 3180 3297 3415 3533
3,00 216 223 229 235 241 247,4 253,2 258,9 264,5 269,9 275,3 280,5 285,6 290,7 295,7
9.885-879.0 2016 2142 2268 2394 2520 2647 2773 2899 3025 3151 3277 3403 3529 3655 3781
3,10 231 238 245 251 258 264,1 270,4 276,4 282,4 288,2 293,9 299,5 305,0 310,4 315,7
9.885-880.0 2153 2288 2422 2557 2691 2826 2960 3095 3230 3364 3499 3633 3768 3902 4037
3,20 246 253 261 268 275 281,5 288,1 294,6 300,9 307,1 310,1 319,1 325,0 330,8 336,4
9.885-881.0 2294 2438 2581 2724 2868 3011 3155 3298 3441 3585 3691 3871 4015 4158 4302
3,30 261 269 277 285 292 299,3 306,4 313,3 320,0 326,6 333,1 339,4 345,6 351,8 357,8
9.885-882.0 2440 2592 2745 2897 3050 3202 3355 3507 3660 3812 3965 4117 4270 4422 4575
3,40 277 286 294 302 310 317,7 325,2 332,5 339,7 346,7 353,6 360,3 366,9 373,4 379,8
9.885-883.0 2590 2752 2914 3076 3237 3399 3561 3723 3885 4047 4209 4371 4532 4694 4856
3,50 294 303 312 320 329 336,7 344,6 352,4 360,0 367,4 374,7 381,8 388,8 395,7 402,4
9.885-884.0 2745 2916 3088 3259 3431 3602 3774 3945 4117 4288 4460 4631 4803 4974 5146
3,60 311 321 3308 339 348 356,2 364,6 372,8 380,8 388,7 396,4 403,9 411,3 418,6 425,8
9.885-885.0 2904 3085 3267 3448 3629 3811 3992 4174 4355 4537 4718 4900 5081 5263 5444
3,70 329 339 348 360 367 376,3 385,1 393,8 402,3 410,6 418,7 426,7 434,5 442,2 449,8
9.885-887.0 3067 3259 3451 3642 3834 4026 4217 4409 4601 4792 4984 5176 5367 5559 5751
3,80 364 357 368 378 387 396,9 406,2 415,4 424,3 433,1 441,6 450,1 458,3 466,4 474,4
9.885-888.0 3235 3437 3640 3842 4044 4246 4448 4651 4853 5055 5257 5459 5662 5864 6066
3,90 365 376 387 398 408 418,1 427,9 437,5 446,9 456,2 465,2 474,0 482,7 491,3 499,7
9.885-889.0 3408 3621 3834 4047 4260 4473 4686 4899 5112 5325 5537 5750 5963 6176 6389
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein. Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support. The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
126
5.1.2.3 Round jet nozzle Form 21 LL – Long Life
mit Strömungseinsatz with flow straightener
Betriebsdruck: max. 3000 bar Operating pressure: max. 43500 psi
Gewinde/Thread: M10
Gewinde M nach ISO 261;Thread M as per ISO 261
Verwendung bei: Pistolen, Wasserwerkzeuge To use for: guns, water tools
Blinddüse 6.025-237.0 Dummy Nozzle 6.025-237
Düsen Nozzle
mm
Betriebsdruck / Operating pressure - bar -
200 300 400 500 600 700 750 800 900 1000 1100 1200 1300 1400 1500
Material-Nr. Material-No.
Düsendurchsatz / Flow rate - l/min Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
0,15 0,2 0,2 0,3 0,3 0,3 0,4 0,4 0,4 0,4 0,4 0,5 0,5 0,5 0,5 0,5
9.886-918.0 1 1 1 2 2 2 2 3 3 3 4 4 4 5 5
0,20 0,3 0,4 0,5 0,5 0,6 0,6 0,7 0,7 0,7 0,8 0,8 0,8 0,9 0,9 0,9
6.025-445.0 1 2 2 3 3 4 4 5 5 6 6 7 7 8 9
0,25 0,5 0,7 0,8 0,9 0,9 1,0 1,0 1,1 1,1 1,2 1,3 1,3 1,4 1,4 1,5
6.025-238.0 2 3 4 4 5 6 7 7 8 9 10 11 12 13 13
0,30 0,8 1,0 1,1 1,2 1,4 1,5 1,5 1,6 1,7 1,7 1,8 1,9 2,0 2,1 2,1
6.025-248.0 3 4 5 6 8 9 10 10 12 13 14 15 17 18 19
0,35 1,1 1,3 1,5 1,7 1,8 2,0 2,1 2,1 2,3 2,4 2,5 2,6 2,7 2,8 2,9
6.025-239.0 4 5 7 9 11 12 13 14 16 18 19 21 23 25 26
0,40 1,4 1,7 2,0 2,2 2,4 2,6 2,7 2,8 2,9 3,1 3,3 3,4 3,5 3,7 3,8
6.025-240.0 5 7 9 11 14 16 17 18 21 23 25 27 30 32 34
0,45 1,8 2,2 2,5 2,8 3,0 3,3 3,4 3,5 3,7 3,9 4,1 4,3 4,5 4,6 4,8
6.025-241.0 6 9 12 14 17 20 22 23 26 29 32 35 38 41 43
0,50 2,2 2,7 3,1 3,4 3,8 4,1 4,2 4,3 4,6 4,8 5,1 5,3 5,5 5,7 5,9
6.025-242.0 7 11 14 18 21 25 27 29 32 36 39 43 47 50 54
0,55 2,6 3,2 3,7 4,1 4,5 4,9 5,1 5,2 5,6 5,9 6,2 6,4 6,7 6,9 7,2
6.025-243.0 9 13 17 22 26 30 32 35 39 43 48 52 56 61 65
0,60 3,1 3,8 4,4 4,9 5,4 5,8 6,0 6,2 6,6 7,0 7,3 7,6 8,0 8,3 8,5
6.025-244.0 10 15 21 26 31 36 39 41 46 52 57 62 67 72 77
0,65 3,7 4,5 5,2 5,8 6,3 6,9 7,1 7,3 7,8 8,2 8,6 9,0 9,3 9,7 10,0
6.025-245.0 12 18 24 30 36 42 45 48 54 60 67 73 79 85 91
0,70 4,2 5,2 6,0 6,7 7,4 7,9 8,2 8,5 9,0 9,5 10,0 10,4 10,8 11,2 11,6
6.025-236.0 14 21 28 35 42 49 53 56 63 70 77 84 91 98 105
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein. Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support. The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
127
Round jet nozzle Form 21 LL – Long Life
mit Strömungseinsatz with flow straightener
Betriebsdruck: max. 3000 bar Operating pressure: max. 43500 psi
Gewinde/Thread: M10
Gewinde M nach ISO 261;Thread M as per ISO 261
Verwendung bei: Pistolen, Wasserwerkzeuge To use for: guns, water tools
Blinddüse 6.025-237.0 Dummy Nozzle 6.025-237.0
Düsen Nozzle
mm
Betriebsdruck / Operating pressure - bar -
200 300 400 500 600 700 750 800 900 1000 1100 1200 1300 1400 1500
Material-Nr. Material-No.
Düsendurchsatz / Flow rate - l/min Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
0,75 4,9 6,0 6,9 7,7 8,4 9,1 9,4 9,8 10,3 10,9 11,4 11,9 12,4 12,9 13,4
6.025-441.0 16 24 32 40 48 56 60 64 72 81 89 97 105 113 121
0,80 5,5 6,8 7,8 8,8 9,6 10,4 10,7 11,1 11,8 12,4 13,0 13,6 14,1 14,7 15,2
6.025-442.0 18 27 37 46 55 64 69 73 82 92 101 110 119 128 137
0,85 6,3 7,7 8,9 9,9 10,9 11,7 12,1 12,5 13,3 14,0 14,7 15,3 16,0 16,6 17,2
6.025-443.0 21 31 41 52 62 72 78 83 93 103 114 124 134 145 155
0,90 7,0 8,6 9,9 11,1 12,2 13,1 13,6 14,0 14,9 15,7 16,5 17,2 17,9 18,6 19,2
6.025-444.0 23 35 46 58 70 81 87 93 104 116 128 139 151 162 174
0,95 7,8 9,6 11,1 12,4 13,6 14,6 15,2 15,7 16,6 17,5 18,4 19,2 20,0 20,7 21,4
9.886-913.0 26 39 52 65 78 90 97 103 116 129 142 155 168 181 194
1,00 8,7 10,6 12,3 13,7 15,0 16,2 16,8 17,3 18,4 19,4 20,3 21,2 22,1 22,9 23,7
9.886-914.0 29 43 57 72 86 100 107 115 129 143 157 172 186 200 215
1,05 9,6 11,7 13,5 15,1 16,6 17,9 18,5 19,1 20,3 21,4 22,4 23,4 24,4 25,3 26,2
9.886-915.0 32 47 63 79 95 110 118 126 142 158 174 189 205 221 237
1,10 10,5 12,9 14,8 16,6 18,2 19,6 20,3 21,0 22,3 23,5 24,6 25,7 26,7 27,8 28,7
9.886-916.0 35 52 69 87 104 121 130 139 156 173 191 208 225 242 260
1,15 11,5 14,0 16,2 18,1 19,9 21,5 22,2 22,9 24,3 25,6 26,9 28,1 29,2 30,3 31,4
9.910-959.0 38 57 76 95 114 133 142 151 170 189 208 227 246 265 284
1,20 12,5 15,3 17,7 19,7 21,6 23,4 24,2 25,0 26,5 27,9 29,3 30,6 31,8 33,0 34,2
9.886-917.0 41 62 82 103 124 144 155 165 186 206 227 247 268 289 309
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein. Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support. The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
128
Round jet nozzle Form 21 LL – Long Life
mit Strömungseinsatz with flow straightener
Betriebsdruck: max. 3000 bar Operating pressure: max. 43500 psi
Gewinde/Thread: M10
Gewinde M nach ISO 261;Thread M as per ISO 261
Verwendung bei: Pistolen, Wasserwerkzeuge To use for: guns, water tools
Blinddüse 6.025-237.0 Dummy Nozzle 6.025-237.0
Düsen Nozzle
mm
Betriebsdruck / Operating pressure - bar -
1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000
Material-Nr. Material-No.
Düsendurchsatz / Flow rate - l/min Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
0,15 0,6 0,6 0,6 0,6 0,6 0,6 0,6 0,7 0,7 0,7 0,7 0,7 0,7 0,7 0,8
9.886-918.0 5 5 6 6 6 7 7 7 8 8 8 9 9 9 10
0,20 1,0 1,0 1,0 1,1 1,1 1,1 1,2 1,2 1,2 1,2 1,3 1,3 1,3 1,3 1,3
6.025-445.0 9 10 10 11 11 12 13 13 14 14 15 15 16 17 17
0,25 1,5 1,6 1,6 1,7 1,7 1,8 1,8 1,8 1,9 1,9 2,0 2,0 2,0 2,1 2,1
6.025-238.0 14 15 16 17 18 19 20 21 21 22 23 25 25 26 27
0,30 2,2 2,3 2,3 2,4 2,5 2,5 2,6 2,6 2,7 2,8 2,8 2,9 2,9 3,0 3,0
6.025-248.0 21 22 23 24 26 27 28 30 31 32 33 35 36 37 39
0,35 3,0 3,1 3,2 3,3 3,4 3,4 3,5 3,6 3,7 3,8 3,8 3,9 4,0 4,0 4,1
6.025-239.0 28 30 32 33 35 37 39 40 42 44 46 47 49 51 53
0,40 3,9 4,0 4,2 4,3 4,4 4,5 4,6 4,7 4,8 4,9 5,0 5,1 5,2 5,3 5,4
6.025-240.0 37 39 41 44 46 48 50 53 55 57 60 62 64 66 69
0,45 5,0 5,1 5,3 5,4 5,6 5,7 5,8 6,0 6,1 6,2 6,3 6,5 6,6 6,7 6,8
6.025-241.0 46 49 52 55 58 61 64 67 70 72 75 78 81 84 87
0,50 6,1 6,3 6,5 6,7 6,9 7,0 7,2 7,4 7,5 7,7 7,8 8,0 8,1 8,3 8,4
6.025-242.0 57 61 64 68 72 75 79 82 86 89 93 97 100 104 107
0,55 7,4 7,6 7,9 8,1 8,3 8,5 8,7 8,9 9,1 9,3 9,5 9,6 9,8 10,0 10,2
6.025-243.0 69 74 78 82 87 91 95 100 104 108 113 117 121 126 130
0,60 8,8 9,1 9,4 9,6 9,9 10,1 10,4 10,6 10,8 11,0 11,3 11,5 11,7 11,9 12,1
6.025-244.0 82 88 93 98 103 108 113 119 124 129 134 139 144 149 155
0,65 10,4 10,7 11,0 11,3 11,6 11,9 12,2 12,4 12,7 13,0 13,2 13,5 13,7 14,0 14,2
6.025-245.0 97 103 109 115 121 127 133 139 145 151 157 163 169 175 181
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein. Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten. *
* In case of recoil force > 150 N the jetting device must be equipped with a body support. The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
129
Round jet nozzle Form 21 LL – Long Life
mit Strömungseinsatz with flow straightener
Betriebsdruck: max. 3000 bar Operating pressure: max. 43500 psi
Gewinde/Thread: M10
Gewinde M nach ISO 261;Thread M as per ISO 261
Verwendung bei: Pistolen, Wasserwerkzeuge To use for: guns, water tools
Blinddüse 6.025-237.0 Dummy Nozzle 6.025-237.0
Düsen Nozzle
mm
Betriebsdruck / Operating pressure - bar -
1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000
Material-Nr. Material-No..
Düsendurchsatz / Flow rate - l/min Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
0,70 12,0 12,4 12,7 13,1 13,4 13,8 14,1 14,4 14,7 15,0 15,3 15,6 15,9 16,2 16,5
6.025-236.0 112 119 126 133 140 147 154 161 168 175 182 189 196 203 210
0,75 13,8 14,2 14,6 15,0 15,4 15,8 16,2 16,5 16,9 17,2 17,6 17,9 18,2 18,6 18,9
6.025-441.0 129 137 145 153 161 169 177 185 193 201 209 217 225 233 242
0,80 15,7 16,2 16,6 17,1 17,5 18,0 18,4 18,8 19,2 19,6 20,0 20,4 20,8 21,1 21,5
6.025-442.0 147 156 165 174 183 192 202 211 220 229 238 247 257 266 275
0,85 17,7 18,3 18,8 19,3 19,8 20,2 20,8 21,2 21,7 22,1 22,6 23,0 23,4 23,9 24,3
6.025-443.0 165 176 186 196 207 217 228 238 248 259 269 279 290 300 310
0,90 19,9 20,5 21,1 21,6 22,2 22,8 23,3 23,8 24,3 24,8 25,3 25,8 26,3 26,7 27,2
6.025-444.0 186 197 209 220 232 243 255 267 278 290 301 313 325 336 348
0,95 22,1 22,8 23,5 24,1 24,7 25,4 26,0 26,5 27,1 27,7 28,2 28,8 29,3 29,8 30,3
9.886-913.0 207 220 233 245 258 271 284 297 310 323 336 349 362 375 388
1,00 24,5 25,3 26,0 26,7 27,4 28,1 28,8 29,4 30,0 30,7 31,3 31,9 32,4 33,0 33,6
9.886-914.0 229 243 258 272 286 301 315 329 344 358 372 386 401 415 429
1,05 27,0 27,9 28,7 29,5 30,2 31,0 31,7 32,4 33,1 33,8 34,5 35,1 35,8 36,4 37,0
9.886-915.0 252 268 284 300 316 331 347 363 379 395 410 426 442 458 473
1,10 29,7 30,6 31,5 32,3 33,2 34,0 34,8 35,6 36,3 37,1 37,8 38,6 39,3 40,0 40,6
9.886-916.0 277 294 312 329 346 364 381 398 416 433 450 468 485 502 520
1,15 32,4 33,4 34,4 35,3 36,3 37,2 38,0 38,9 39,7 40,5 41,3 42,1 42,9 43,7 44,4
9.910-959.0 303 322 341 360 379 398 416 435 454 473 492 511 530 549 568
1,20 35,3 36,4 37,5 38,5 39,5 40,5 41,4 42,3 43,3 44,1 45,0 45,9 46,7 47,5 48,4
9.886-917.0 330 350 371 392 412 433 453 474 495 515 536 557 577 598 618
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein. Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support. The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
130
5.1.2.4 Round jet nozzle Form 21 S – Saphir
mit Saphireinsatz with sapphire insert Betriebsdruck: max. 3000 bar Operating pressure: max. 43500 psi
Gewinde/Thread: M10
Gewinde M nach ISO 261;Thread M as per ISO 261 Verwendung bei: Pistolen, Wasserwerkzeuge To use for: guns, water tools
Blinddüse 6.025-237.0 Dummy Nozzle 6.025-237.0
Düsen Nozzle
mm
Betriebsdruck / Operating pressure - bar -
200 300 400 500 600 700 750 800 900 1000 1100 1200 1300 1400 1500
Material-Nr. Material-No.
Düsendurchsatz / Flow rate - l/min Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
0,12 0,1 0,1 0,1 0,1 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2
9.886-223.0 0 0 1 1 1 1 1 1 1 2 2 2 2 2 2
0,15 0,1 0,2 0,2 0,2 0,2 0,3 0,3 0,3 0,3 0,3 0,3 0,3 0,4 0,4 0,4
9.886-224.0 0 1 1 1 1 2 2 2 2 2 3 3 3 3 4
0,18 0,2 0,3 0,3 0,3 0,4 0,4 0,4 0,4 0,4 0,5 0,5 0,5 0,5 0,5 0,6
9.886-225.0 1 1 1 2 2 2 3 3 3 3 4 4 4 5 5
0,20 0,3 0,3 0,4 0,4 0,4 0,5 0,5 0,5 0,5 0,6 0,6 0,6 0,6 0,7 0,7
6.025-218.0 1 1 2 2 3 3 3 3 4 4 5 5 5 6 6
0,25 0,4 0,5 0,6 0,6 0,7 0,7 0,8 0,8 0,8 0,9 0,9 1,0 1,0 1,0 1,1
6.025-219.0 1 2 3 3 4 5 5 5 6 7 7 8 8 9 10
0,30 0,6 0,7 0,8 0,9 1,0 1,1 1,1 1,1 1,2 1,3 1,3 1,4 1,4 1,5 1,6
9.886-207.0 2 3 4 5 6 7 7 8 8 9 10 1 12 13 14
0,35 0,8 0,9 1,1 1,2 1,3 1,4 1,5 1,5 1,6 1,7 1,8 1,9 2,0 2,0 2,1
9.886-208.0 3 4 5 6 8 9 10 10 11 13 14 15 17 18 19
0,40 1,0 1,2 1,4 1,6 1,8 1,9 2,0 2,0 2,1 2,3 2,4 2,5 2,6 2,7 2,8
9.886-209.0 3 5 7 8 10 12 13 13 15 17 18 20 22 23 25
0,45 1,3 1,6 1,8 2,0 2,2 2,4 2,5 2,6 2,7 2,9 3,0 3,1 3,3 3,4 3,5
6.025-220.0 4 6 8 11 13 15 16 17 19 21 23 25 27 30 32
0,50 1,6 1,9 2,2 2,5 2,7 3,0 3,1 3,2 3,3 3,5 3,7 3,9 4,0 4,2 4,3
9.886-210.0 5 8 10 13 16 18 20 21 23 26 29 31 34 36 39
0,55 1,9 2,3 2,7 3,0 3,3 3,6 3,7 3,8 4,1 4,3 4,5 4,7 4,9 5,1 5,2
9.886-211.0 6 9 13 16 19 22 24 25 28 32 35 38 41 44 47
0,60 2,3 2,8 3,2 3,6 3,9 4,3 4,4 4,5 4,8 5,1 5,3 5,6 5,8 6,0 6,2
9.886-212.0 8 11 15 19 23 26 28 30 34 38 41 45 49 53 56
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein. Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support. The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
131
Round jet nozzle Form 21 S -Saphir mit Saphireinsatz with sapphire insert Betriebsdruck: max. 3000 bar Operating pressure: max. 43500 psi
Gewinde/Thread: M10
Gewinde M nach ISO 261;Thread M as per ISO 261 Verwendung bei: Pistolen, Wasserwerkzeuge To use for: guns, water tools
Blinddüse 6.025-237.0 Dummy Nozzle 6.025-237.0
Düsen Nozzle
mm
Betriebsdruck / Operating pressure - bar -
200 300 400 500 600 700 750 800 900 1000 1100 1200 1300 1400 1500
Material-Nr. Material-No.
Düsendurchsatz / Flow rate - l/min Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
0,65 2,7 3,3 3,8 4,2 4,6 5,0 5,2 5,3 5,7 6,0 6,3 6,5 6,8 7,1 7,3
6.025-221.0 9 13 18 22 26 31 33 35 40 44 48 53 57 62 66
0,70 3,1 3,8 4,4 4,9 5,4 5,8 6,0 6,2 6,6 6,9 7,3 7,6 7,9 8,2 8,5
6.025-222.0 10 15 20 26 31 36 38 41 46 51 56 61 66 72 77
0,75 3,6 4,4 5,0 5,6 6,2 6,6 6,9 7,1 7,5 7,9 8,3 8.7 9,1 9,4 9,7
9.886-213.0 12 18 23 29 35 41 44 47 53 59 64 70 76 82 88
0,80 4,0 4,9 5,7 6,4 7,0 7,6 7,8 8,1 8,6 9,0 9,5 9,9 10,3 10,7 11,1
9.886-214.0 13 20 27 33 40 47 50 53 60 67 73 80 87 93 100
0,85 4,6 5,6 6,5 7,2 7,9 8,5 8,8 9,1 9,7 10,2 10,7 11,2 11,6 12,1 12,5
9.886-215.0 15 23 30 38 45 53 56 60 68 75 83 90 98 105 113
0,90 5,1 6,3 7,2 8,1 8,9 9,6 9,9 10,2 10,9 11,4 12,0 12,5 13,0 13,5 14,0
9.886-216.0 17 25 34 42 51 59 63 68 76 84 93 101 110 118 127
0,95 5,7 7,0 8,1 9,0 9,9 10,7 11,0 11,4 12,1 12,7 13,4 14,0 14,5 15,1 15,6
9.886-217.0 19 28 38 47 56 66 71 75 85 95 103 113 122 132 141
1,00 6,3 7,7 8,9 10,0 10,9 11,8 12,2 12,6 13,4 14,1 14,8 15,5 16,1 16,7 17,3
9.886-218.0 21 31 42 52 63 73 78 83 94 104 115 125 136 146 156
1,10 7,6 9,4 10,8 12,1 13,2 14,3 14,8 15,3 16,2 17,1 17,9 18,7 19,5 20,2 20,9
9.886-219.0 25 38 50 63 76 88 95 101 114 126 139 151 164 177 189
1,20 9,1 11,1 12,9 14,4 15,8 17,0 17,6 18,2 19,3 20,3 21,3 22,3 23,2 24,1 24,9
9.886-220.0 30 45 60 75 90 105 113 120 135 150 165 180 195 210 225
1,30 10,7 13,1 15,1 16,9 18,5 20,0 20,7 21,3 22,6 23,9 25,0 26,1 27,2 28,2 29,2
9.886-221.0 35 53 70 88 106 123 132 141 159 176 194 211 229 247 264
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein. Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support. The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
132
Round jet nozzle Form 21 S - Saphir mit Saphireinsatz with sapphire insert
Betriebsdruck: max. 3000 bar Operating pressure: max. 43500 psi
Gewinde/Thread: M10
Gewinde M nach ISO 261;Thread M as per ISO 261 Verwendung bei: Pistolen, Wasserwerkzeuge To use for: guns, water tools
Blinddüse 6.025-237.0 Dummy Nozzle 6.025-237.0
Düsen Nozzle
mm
Betriebsdruck / Operating pressure - bar -
1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000
Material-Nr. Material-No.
Düsendurchsatz / Flow rate - l/min Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
0,12 0,3 0,3 0,3 0,3 0,3 0,3 0,3 0,3 0,3 0,3 0,3 0,3 0,3 0,3 0,4
9.886-223.0 2 3 3 3 3 3 3 3 4 4 4 4 4 4 5
0,15 0,4 0,4 0,4 0,4 0,4 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,6
9.886-224.0 4 4 4 4 5 5 5 5 6 6 6 6 7 7 7
0,18 0,6 0,6 0,6 0,6 0,6 0,7 0,7 0,7 0,7 0,7 0,7 0,8 0,8 0,8 0,8
9.886-225.0 5 6 6 6 7 7 7 8 8 8 9 9 9 10 10
0,20 0,7 0,7 0,8 0,8 0,8 0,8 0,8 0,9 0,9 0,9 0,9 0,9 0,9 1,0 1,0
6.025-218.0 7 7 8 8 8 9 9 10 10 10 11 11 12 12 13
0,25 1,1 1,2 1,2 1,2 1,2 1,3 1,3 1,3 1,4 1,4 1,4 1,5 1,5 1,5 1,5
6.025-219.0 10 11 12 12 13 14 14 15 16 16 17 18 18 19 20
0,30 1,6 1,7 1,7 1,8 1,8 1,8 1,9 1,9 2,0 2,0 2,0 2,1 2,1 2,2 2,2
9.886-207.0 15 16 17 18 19 20 21 22 23 23 24 25 26 27 28
0,35 2,2 2,3 2,3 2,4 2,4 2,5 2,6 2,6 2,7 2,7 2,8 2,8 2,9 2,9 3,0
9.886-208.0 20 23 23 24 26 27 28 29 31 32 33 34 36 37 38
0,40 2,9 2,9 3,0 3,1 3,2 3,3 3,4 3,4 3,5 3,6 3,6 3,7 3,8 3,8 3,9
9.886-209.0 27 28 30 32 33 35 37 38 40 42 43 45 47 48 50
0,45 3,6 3,7 3,8 3,9 4,0 4,1 4,2 4,3 4,4 4,5 4,6 4,7 4,8 4,9 5,0
6.025-220.0 34 37 38 40 42 44 46 49 51 53 55 57 59 61 63
0,50 4,5 4,6 4,7 4,9 5,0 5,1 5,2 5,4 5,5 5,6 5,7 5,8 5,9 6,0 6,1
9.886-210.0 42 44 47 50 52 55 57 60 63 65 68 70 73 76 78
0,55 5,4 5,6 5,7 5,9 6,0 6,2 6,3 6,5 6,6 6,8 6,9 7,0 7,1 7,3 7,4
9.886-211.0 50 54 57 60 63 66 69 73 76 79 82 85 88 91 95
0,60 6,4 6,6 6,8 7,0 7,2 7,4 7,5 7,7 7,9 8,0 8,2 8,4 8,5 8,7 8,8
9.886-212.0 60 64 68 71 75 79 83 86 90 94 98 101 105 109 113
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein. Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support. The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
133
Round jet nozzle Form 21 S - Saphir mit Saphireinsatz with sapphire insert
Betriebsdruck: max. 3000 bar Operating pressure: max. 43500 psi
Gewinde/Thread: M10
Gewinde M nach ISO 261;Thread M as per ISO 261 Verwendung bei: Pistolen, Wasserwerkzeuge To use for: guns, water tools
Blinddüse 6.025-237.0 Dummy Nozzle 6.025-237.0
Düsen Nozzle
mm
Betriebsdruck / Operating pressure - bar -
1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000
Material-Nr. Material-No.
Düsendurchsatz / Flow rate - l/min Rückstoßkraft in Strahlrichtung / Recoil force in jetting direction /(N)*
0,65 7,5 7,8 8,0 8,2 8,4 8,6 8,8 9,0 9,2 9,4 9,6 9,8 10,0 10,2 10,3
6.025-221.0 70 75 79 84 88 92 97 101 106 110 115 119 123 128 132
0,70 8,8 9,0 9,3 9,5 9,8 10,0 10,3 10,5 10,7 10,9 11,2 11,4 11,6 11,8 12,0
6.025-222.0 82 87 92 97 102 107 112 117 123 128 133 138 143 148 153
0,75 10,0 10,4 10,7 10,9 11,2 11,5 11,8 12,0 12,3 12,6 12,8 13,1 13,3 13,5 13,8
9.886-213.0 94 100 106 111 117 123 129 135 141 147 152 158 164 170 176
0,80 11,4 11,8 12,1 12,5 12,8 13,1 13,4 13,7 14,0 14,3 14,6 14,8 15,1 15,4 15,7
9.886-214.0 107 113 120 127 133 140 147 153 160 167 173 180 187 193 200
0,85 12,9 13,3 13,7 14,1 14,4 14,8 15,1 15,5 15,8 16,1 16,5 16,8 17,1 17,4 17,7
9.886-215.0 121 128 136 143 151 158 166 173 181 188 196 203 211 218 226
0,90 14,5 14,9 15,3 15,8 16,2 16,6 17,0 17,3 17,7 18,1 18,4 18,8 19,1 19,5 19,8
9.886-216.0 135 144 152 160 169 177 186 194 203 211 220 228 236 245 253
0,95 16,1 16,6 17,1 17,6 18,0 18,5 18,9 19,3 19,7 20,1 20,5 20,9 21,3 21,7 22,1
9.886-217.0 151 160 169 179 188 198 207 216 226 235 245 245 263 273 282
1,00 17,9 18,4 18,9 19,5 20,0 20,5 20,9 21,4 21,9 22,3 22,8 23,2 23,6 24,0 24,5
9.886-218.0 167 177 188 198 208 219 229 240 250 261 271 281 292 302 313
1,10 21,6 22,3 22,9 23,6 24,2 24,8 25,3 25,9 26,5 27,0 27,5 28,1 28,6 29,1 29,6
9.886-219.0 202 214 227 240 252 265 277 290 303 315 328 341 353 366 378
1,20 25,7 26,5 27,3 28,0 28,8 29,5 30,2 30,8 31,5 32,1 32,8 33,4 34,0 34,6 35,2
9.886-220.0 240 255 270 285 300 315 330 345 360 375 390 405 420 435 450
1,30 30,2 31,1 32,0 32,9 33,7 34,6 35,4 36,2 37,0 37,7 38,5 39,2 39,9 40,6 41,3
9.886-221.0 282 299 317 335 352 370 388 405 423 440 458 476 493 511 529
* Bei Rückstoßkraft > 150 N muss die Spritzeinrichtung mit einer Körperstütze ausgerüstet sein. Die max. zulässige Rückstoßkraft für den manuellen Einsatz darf 250 N nicht überschreiten.
* In case of recoil force > 150 N the jetting device must be equipped with a body support. The max. permissible recoil force for manual operation must not exceed 250 N.
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
134
6 ELECTRIC ACCESSORIES
Fußschalter Foot switch
Material-Nr. Material-No.
Gewicht ca. Weight appr.
2-Kanal 2-channel
E-Exi - IP65 E-Exi - IP65
9.889-511.0 1,5 kg
2-Kanal 2-channel
24 V DC - IP65 24 V DC - IP65
9.889-501.0 1,5 kg
Kabeltrommel Cable drum
Material-Nr. Material-No.
Gewicht ca. Weight appr.
mit 30 m Kabel with 30 m cable
E-Exi E-Exi
9.890-413.0 5,8 kg
mit 50 m Kabel with 50 m cable
E-Exi E-Exi
9.890-411.0 9,5 kg
mit 30 m Kabel with 30 m cable
24 V DC 24 V DC
9.890-412.0 4,9 kg
mit 50 m Kabel with 50 m cable
24 V DC 24 V DC
9.890-410.0 7,1 kg
Drucktasterstation Remote control box
Material-Nr. Material-No.
Gewicht ca. Weight appr.
2-Kanal 2-channel
E-Exi E-Exi
9.890-387.0 0,5 kg
2-Kanal 2-channel
24 V DC 24 V DC
9.890-399.0 0,5 kg
E-Exi Box Umwandler / Converter
Material-Nr. Material-No.
Gewicht ca. Weight appr.
Gerätespannung Unit voltage
Wasserwerkzeug Water tool
von/from 12 V DC* in/into E-Exi 9.889-539.0* 5,5 kg
von/from 24 V DC in/into E-Exi 9.889-540.0 5,5 kg
*nur für Kompaktgeräte ET600/800, EC1000; EcoPro2500
*only to use for Compact Units ET600/800, EC1000, EcoPro2500
5 m Kabel/cable
3 m Kabel/cable
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
135
NOT - AUS Station Emergency Stop
mit Anschluss für Wasserwerkzeug
with connection for water tool
Material-Nr. Material-No.
Gewicht ca. Weight appr.
2-Kanal 2-channel
E-Exi E-Exi
9.890-388.0 0,5 kg
2-Kanal 2-channel
24 V DC 24 V DC
6.025-447.0 0,5 kg
NOT - AUS Station Emergency Stop
ohne Anschluss für Wasserwerkzeug
without connection for water tool
Material-Nr. Material-No
Gewicht ca. Weight appr.
2-Kanal 2-channel
E-Exi E-Exi
Auf Anfrage
On request 0,4 kg
2-Kanal 2-channel
24 V DC 24 V DC
9.889-528.0 0,4 kg
Stecker / Plug
Stecker / Plug
Dose / Socket
Copyright © 2015 WOMA GmbH | Subject to change | status: 02.2015
136
Contact and Support
WOMA GmbH Werthauser Str. 77 – 79 47226 Duisburg Postfach 14 18 20 47208 Duisburg Telefon +49 2065 304-0 Telefax +49 2065 304-200 E-Mail [email protected] Internet www.woma.de
Sales and Service Werthauser Str. 77 – 79 47226 Duisburg Telefon +49 2065 304-0 Telefax +49 2065 304-200 E-Mail [email protected]