Download pdf - XI INTERNATIONAL SALON OF INVENTIONS AND NEW TECHNOLOGIES «NEW TIME» 2015

`

11

I

1-3 2015, . , October, 1-3 2015, Sevastopol, Russian Federation

INTERNATIONAL SALON of INVENTIONSand NEW TECHNOLOGIES NEW TIME

II

28-30 c 2016 .. ,

September, 28-30 2016Sevastopol, Russian Federation

e-mail: [email protected], [email protected]

`

INTERNATIONAL SALON of INVENTIONSand NEW TECHNOLOGIES NEW TIME

1XI

I

`

INTERNATIONAL SALONof INVENTIONS

and NEW TECHNOLOGIES

NEW TIME

1-3 o 2015 .,

ctober, 1-3 2015Sevastopol,

Russian Federation

2 XI

XI `

1-3 2015 . , , BEST WESTERN

( 8, A )

XI INTERNATIONAL SALONof INVENTIONS and NEW TECHNOLOGIES

NEW TIME

October, 1-3 (2015)Russian Federation, Sevastopol,

BEST WESTERN Sevastopol HotelHall ADMIRAL

(8, Nakhimov Avenue, Artilleriyskaya bukhta)

C:1-2 10.00 18.00,3 10.00 13.00

:1 11.00.

:3 15.00.

Working time of Salon:October, 1-2 from 10.00 to 18.00;October, 3 from 10.00 to 13.00.

Opening ceremony of Salon:October, 1 at 11.00.

Award ceremony:October, 3 at 15.00

3XI

I

:

!

, : .

, .

. , I , , . . .

6 XI

, !

- XI - . , , , -, , - - - .

, - - , - .

, , -, . , - -. .

- . , . - , , .

, , 6 - , , .

,

..

7XI

.

8 XI

`,

:

, , , ` , , , ,, , , ,, , , , ,, , , ,

C :

, (),

, . . , ., - (. ), . -

` , (. )

- , - (. )

- , (. )

, - - , -- (. )

, ., , - (. )

, - . , . - . .. ( )

, -, - (IFIA)(. )

, - . , ., (. -)

, ., - (. )

9XI

, . (. ) , .

- -, (IFIA) (. )

, . . ., ., - (. )

, - , - (. `)

, ., . - , (. )

, - . , ., - (. )

, . - () (. )

, - . , ., - (. ), - ( . )

, - .., ., -- (. )

, - . ., ., - (. -)

:

-` IT-

10 XI

` `

.

- ()

- (. )

- - (. -, - )

- ()

()

(. `-)

- (. )

, - (. )

(. )

, - - - (. )

INVENTARIUM-SCIENCE (. )

11XI

` :

1. 2. , , -3. 4. , , 5. , c, , 6. 7. , , 8. , , 9. 10. `, , 11. , , 12. 13. , , , , 14. 15. , -16. .

. ( -

) .Information in a catalogue is given in language and in styles of

participants. All data of participants (participants of Salon and Contest)are printed in a catalogue from their agreement.

12 XI

/ATALOGUE CONTENTS

1. /Fundamental and Applied Science ........................................................ 13 2. ,/Energetic and Electrical Engineering, Energyeffectiveness ................. 19 3. /General Mechanics and Mechanical Engineering ................................. 30 4. , , /New Materials and Instruments, Apparatus Engineering ..................... 35 5. , , , /transport, Building, Design, Municipal Economy ............................. 57 6. /Food Industry and Agriculture .............................................................. 70 7. , , /Electronics and Computer Technologies, onnection .......................... 79 8. , , /Optics and Laser Technique, Robots ..................................................... 91 9. /Ecology and Environment ...................................................................... 99 10. `, /Biophysics, Biotechnologies and Bioengineering ................................ 108 11. , , /Medicine, Pharmacology, Cosmetology ............................................... 118 12. /Technologies of Health Care and Life Safety ...................................... 130 13. , , , , , /Sports, Games, Leisure, Cognition, Tourism, Cultural Innovations .... 142 14. /Trade Marks ......................................... 154 15. , /Support for Inventive and Innovative Activity, Innovative Business ..... 156 16. /Others ................................................................... 173

/Youth Contest

1. /Inventions .................................................... 182 2. /New Technologies ............................. 211 3. /Social Technologies .................. 244

13XI

1. /

FUNDAMENTAL AND APPLIED SCIENCE

1.1. : `-

. , 5 . , , 299014e-mail: [email protected]

. () - 1992 . (1994 .) 1 - (1995 .), - () - . - ( ). . (1989.), 300 , - . - , - ,- , , , - , -.

37 , : 36, 11 , 5, 8, 5. `-. , -- .

1.2. -

` - ()299011, . , . , 28

. 54-44-10 -mail: [email protected]

. .

14 XI

-- - , , - , - - . : -, : (), (), - ().

, - , , - . -: , - - , - , - , - , , - - , .

. - , . - , . , - . - . - - . - , , - , - - . -

15XI

, - , -.

1.3. , - - ACELANCALCULATION SOFTWARE MODULE FOR COMPLEX ELASTIC,ELECTROELASTICITY AND ACOUSTIC BODIES FROMFUNCTIONAL HETEROGENEOUS MATERIALS FORFINITE-ELEMENT PACKAGE ACELAN

.. , .. , .. ,.. , .. (. --,) ,

. , 1, . --, , 344000e-mail: [email protected]

,. ` , 105, . --, , 344000

e-mail: [email protected]

. - ACELAN, - - . , . - - . , . ` -: -, . - 2014612715 (2014).

Software module of specialized in finite element package ACELAN, designedfor modeling and calculation of piezoelectric devices loaded on liquid andgaseous media was developed. The developed module allows to take intoaccount non-uniform elastic properties and electroelastic piezoelectric elementsthat arise in the course of their operation or polarization. The aim of the studyis to provide a tool of mathematical and numerical modeling of high technology

16 XI

piezoelectric devices. The developed software module is designed for use inthe piezoelectric instrument engineering in the field of education in highereducation institutions.

1.4. ACELAN OPTIMIZATION MODULE OF PACKAGE ACELAN BASED ONGENETIC ALGORITHMS

.. , .. `, .. , .. ,.. (. --, )

,. , 1, . --, , 344000

e-mail: [email protected] ,

. ` , 105, . --, , 344000e-mail: [email protected]

. - ACELAN, - - . , - , - . - - - . - -, . `--: , . - 2015613228 (2015).

Software module of specialized in finite element package ACELAN, designedfor modeling and calculation of piezoelectric devices loaded on liquid andgaseous media was developed. The developed module allows calculations tooptimize the piezoelectric devices, the identification of non-homogeneouselastic and electrostatic properties of piezoelectric elements that arise in thecourse of their operation or polarization. The aim of the study is to provide atool to optimize high technology piezoelectric devices and identification ofthe properties of elastic and electroelastic materials. The developed softwaremodule is designed for use in the piezoelectric instrument engineering in thefield of education in higher education institutions.

17XI

1.5. ` - PROGRAM SOFTWARE FOR MODELING OF THE STRESS-STRAIN STATE IN LAYERED CYLINDRICAL AND ELLIPTICCONSTRUCTIONS UNDER PULSE PROBE IMPACTS

.. , .. (. --, )

,. , 1, . --, , 344000

-mail: [email protected] ,

. ` , 105, . --, , 344000-mail: [email protected]

. -- -, - , , - - . - -- . - , - ` , - . - , - , - - , - - . - , . 2 --

18 XI

. , - , , - .. :

2014613316(2014), 2014613315(2014), 2014613314(2014),2013615308(2013), 2013615307(2013), 2012661167(2012),2012661166(2012), 2011612071(2011), 2011610785(2011),2010611892(2010), 2010611891(2010), 2009615589(2009),2008614102(2008).It intends for modeling stress-strain state in layered cylindrical and elliptic

constructions, fabricated of isotropic and transverse-isotropic compositematerials, taking into account all types of waves, propagating into thesematerials, wave processes in layered structures and influence of surfacecurvature of the considered constructions at given spatial-time distribution ofthe sources of local or distributed pulse impacts, applied to internal and externalsurfaces of the considered constructions. It has been developed on the base oftensor relationships of the generalized method of scalarization of dynamicelastic fields in transverse-isotropic media. It includes original software forcalculation of high transcendent functionsMathieu functions,modified Mathieu functions in the form of series of products of the Besselfunctions and in the form of series of the Hankel functions, presented in thesolutions of the problems for elliptic constructions. It includes originalcomputer programs for modeling processes of state diagnostics of the layeredconstructions, manufactured from transverse-isotropic materials by usingacoustic active methods of non-destructive control at single and multi-timeinfluence of probe pulses in the form of the Gauss function, local-distributedon external and internal surfaces of the considered constructions. It allowsone to increase significantly a quality of analysis of results of the statediagnostics of constructions under operation conditions. It is successively usedby 2 scientific-research organizations. It is expedient to use at designingconstructions from advanced anisotropic composite materials, quality controlof their fabrication and state diagnostics at various stages of life cycle inmachinery-building, aircraft-building, shipbuilding, etc.

19XI

2.

,/

ENERGETIC AND ELECTRICAL ENGINEERING,ENERGYEFFECTIVENESS

2.1 . , ` -- A DEVICE FOR REMOVAL OF HEAT FROM THE ELEMENTS REA,OPERATING IN THE INTERMITTENT HEAT WITH AIR COOLING

.., .., .. (. , )

367015, . , ..,70..: (8-8722) 62-37-61, 62-37-97, e-mail: [email protected]

. , - , , - - n-, p- n- - - . -, `, , - , , - - , . `--: , . 2534383.

A device for removal of heat from the elements REA, consisting of series-connected in the electrical circuit through the switching plates semiconductorthermoelements, each of which is formed by two branches made of semiconductorrespectively p-and n-type, and the branches of the p-type and n-type contact endsurfaces respectively with two opposite surfaces of the plate circuit. The surfaceof the structure formed by the branches of TEB, except for the areas adjacent tothe protruding parts of the switching plates, covered with a layer of insulatingdielectric material, removal of heat with cold and hot switching plates and nearby areas is performed in containers with consumable working substances, thecooling which is effected by an air stream.

20 XI

2.2. THE ACTIVE HEAT RECOVERY EXHAUST AIR

.. (. , )

. . 13 169316.: +79125043963 -mail: [email protected]

. , , , - , . - , -, . -. ` : .

2.3. WIRELESS TRANSMISSION OF ELECTRICITY

Stipan Ori (Kastav, Croatia)Jurjenii 69 51215 Kastav Croatia

tel/fax + 385 51 224 964 e-mail: [email protected]

Description. Innovation refers to the transfer of electricity wirelessly froma transmitter to a receiver, which operate on the same frequency.Transmitterconsists of a device in which the core of the movement of electrons is convertedinto electrical impulses which are transmitted through the antenna to thereceiver ...The receiver consists of electromagnetic absorber (through whichthe antenna receives electromagnetic pulses from the transmitter), in whosecore electromagnetic pulses through kontaknih tiles, converted into electricalenergy. Patent of Croatia: PK20110688.

2.4. HYDROGEN PRODUCTION AND ITS APPLICATIONTO THE RESIDENTIAL HEATING STATIONS

Marin Radu, Florica Radu, Valentin Radu, Daniela Radu,Florian Cioroianu, Mariana Cioroianu (Bucharest, Romania)

Research Center for Macromolecular Materials and MembranesSplaiul Independentei, nr. 202B, sector 6, 060023 Bucharest, Romania,


Description. By this presentation we want to make known new innovativetechnology, for construction of residential heating stations, technology that is

21XI

essentially clean, considering that using obtained hydrogen as fuel generatesno harmful emissions, as result from burning is only steam. Residential heatingstation is based on Membrane electro-catalytic system and procces forobtaining fuel gas from water, which is the subject of International ApplicationNo. PCT/RO2011/000015 published under No. WO 2012/011 829 on 26/01/2012. Hydrogen generator, build according with mentioned internationalapplication, is based on a catalyst composed mainly from carbon and metallicmicroelements, putting into evidence its four important properties: 1 Thecarbon, in atomic state, have a very high electrical and thermal conductivity;2 The carbon, in atomic state and in combination with water, form a verygood electrolyte; 3 The carbon, in atomic state, is a stabilizer for hydrogen;4 The carbon, in atomic state, is an excellent catalyst.

2.5.

. , . ` (. -, ) -

199106, , . -, -, 21, . 2./: + 7 (812) 328-86-16, www.spmi.ru,

-mail: [email protected]

. . - . - - , -. - : -. . - . ` : - ; ; . 2440510 (2010).

2.6.

. ,. , . , . (. , )

367015, , ., . , 70

.: 8(8722)62-37-61; 62-39-64, -mail: [email protected]

22 XI

. - , - p- n- , - p-n , - n-p , , - , - p-n- - , , - . ` : .

2.7. ` NEW CREATION TECHNOLOGY OF THE GAS TURBINE ENGINESOF THE SHIPS AND OFF-SHORE PLATFORM POWER PLANTS

.. , . . , .. ,.. (. , )

,. 33, . , 99053

e-mail: [email protected], [email protected], [email protected]

. () - - () (). . - - . - (), - - (), - . , , . - . - , - . - .

23XI

, () - - , -. , - - (. , ) - () - 10 - . 43,3%, - () 80%.

-- , - . 398, 8414.

2.8. POWER GENERATION

A. Prasad.R. Ramadoss.G (India) AATHI, Street: 64/100, Dharumapuram Road, c. Mayiladuthurai, Tamil Nadu, India, 609001

tel.: +918903981504, e-mail: [email protected]

Description. Electric power is generated high efficiency installed insidevacuum. No foreign particle entered, negligible loss, free running.Comparision: compare to other electric power generator it operates underpendulum law. Operation: when supply is fed to electromagnet it activatespendulum to and fro oscillation. Due to and for oscillation of pendulum thegears rotate in one direction. Gears are connected to coupler and then couplersare connected to generator shaft. Generator rotates at 1500 r.p.m. An outputof 10v is induced at the generator. Which is x. A sensor is provided to sensethe output. Comparators are provided to x less than 10v in the output it activatesthe timer in 2-3 seconds. It is fed to supply and than the electromagnet isactivated. Continuously power is generator at the output.

2.9. `

. `. , 34, 299011, . /: (8692) 54-26-18 e-mail: [email protected] www.cluster-energy.com.ua

24 XI

. , . , 2010 . - - - - . - - - - , . ., - - () - - - , . , , - -.

2.10. ,`-

.. , . . , .. (. -, )

. .. ., 26 . -,

194021.: +7-812-2979778, +7-921-9771754,


. `- , - 100 . - ~ 500 40%. - ~ 1,4 . `- : , , . 70 ( -).

25XI

2.11. THE ELECTRIC SOCKET REMOVAL PREVENTER

George Papageorgiou (Kozni, Greese)ph. +306909069651 e-mail: [email protected]

. , - / - . , - ( , , - ) , , , - . (- - // ..), , . . - ( , , ). - . , : , , . - . , .Patent of Greece, No 1007782 (2012).

The Electric Socket Removal Preventer, ensures constant/uninterruptedpower supply to any device of such feature on a global scale. Electric powereddevices of any kind, from household appliances to business machines(mainframes, servers, end-use PCs) as well as healthcare devices and other innumerous categories, according to their usage, maybe unexpectedly seize tooperate due to their sockets extraction from the power outlet. This event mayhappen mistakenly (someone pulls the sockets electrical cord because he wasnot careful at the office/house/hospital etc.), or on purpose, mainly maliciously(a situation that occurred in Greece oand was the reason that triggered my

26 XI

curiosity on how to prevent this). The result of this effect has consequences tothe operation and usage of the electrical device. This effect is different amongthese apparatuses and in many electric appliances it has an irreversible impact(for instance in servers, healthcare devices that support patients lives inhospitals and many others).What this patent ensures, is the locking of the socket to the power plugmechanically guaranteeing its functionality. It can be applied to all types ofpower sockets in terms of voltage and shape worldwide, and in terms ofinstallation wall-mounted, exterior wall-mounted plugs, multi-socket plugs.It can be manufactured at a very low cost and may be replaced by a new one,from time to time. As a result, it will provide constant profit flow to itsmanufacturer who will produce it and sell it on a constant, worldwide basis.

2.12. A REMOTE MONITORING/CONTROLLING ELECTRICALGENERATION AND ENERGY SAVING SYSTEM FOR A GAS VENTING SYSTEM

Min-Chie Chiu (Taiwan)[email protected]

Description.This invention is an automatic electrical generation and energysaving system induced by a gas venting device that often occurs in the petroleumchemical industry. Most of the kinetic energy and potential energy inside thegas venting device is wasted during the venting process. The invention aimsto transform the kinetic energy and potential energy of the venting fluid intoelectrical power by using an electrical generation unit in conjunction with avolume flow controlling unit.

2.13. WIRELESS TRANSMISSION GREEN ENERGY SYSTEMAND ASSEMBLY METHOD

Ming-Shen Jian, Yi-Chi Fang, Yan-Long Chen,Siang-Jyun Li, Hsuan-Chia Chang (Taiwan)

e-mail:[email protected]

Description.The present invention provides a wireless transmission energysystem. The wireless transmission energy system utilizes the cross connectionway to connect the connecting wire set and the antenna set for wirelesslytransmitting the electric energy and can regulate the quantity of the greenenergy circuit and the antenna set according to the requirement of the powerand the transmission distance, thereby, it can provide the advantage of flexiblesetting.

27XI

2.14 1,4-BENZODIOXAN-BASED ELECTROCHROMIC POLYMERAS POTENTIAL ANODIC MATERIAL IN LOW TURN ON VOLTAGEAND HIGH OPTICAL CONTRAST ENERGY-SAVING WINDOWS

Tzi-yi Wu, Chung-Wen Kuo, Yuan-Chung Lin, Yen-Chen Li,Yuh-Shan Su, Ming-Wei Huang (Taiwan)


Description.A 1,4-benzodioxan-based polydithienylpyrrole (PBDO) iselectrochemically synthesized and it displays yellowish-green to bluish-violetcoloration upon doping. Energy saving windows (ESWs) employ PBDO as ananodic polymer and PProDOT-Et2 (or PEDOT) as a cathodic polymer areconstructed. PBDO/PProDOT-Et2 ESW shows higher ?Tmax (32.3 %) andcoloration efficiency (?, 437.5 cm2 C-1) at 586 nm than those of PBDO/PEDOTESW (?T

max = 20.2 %, ? = 152.0 cm2 C-1 at 606 nm), and PBDO/PEDOT and

PBDO/PProDOT-Et2 ESWs show satisfactory optical memories and redoxstability.

2.15. PHOTOBIOREACTOR WITH THE WIND & SOLARHYBRID POWER GENERATING INTEGRATED SYSTEM

Jian-Liang Pan, Jo-Shu Chang, Chun-Yen Chen, Xin-Yu Xu (Taiwan)e-mail: [email protected]

Description. A photo bioreactor system covers a machine unit, severaltransparent cultivation containers, a sensing unit, and a control unit. Themachine unit contains a rotatable platform and a mounting for the platformrun out for cultivation containers. The sensing unit contains the firstphotosensitive set with sensible illumination to output the first electrical signal.The platform rotation or the mounting run out is driven after the control unitreceiving the first electrical signal to change the insulation angles of cultivationcontainers for the most incident light.

2.16. AUTOMATICALLY ADJUST THE OPENING ANGLEAND ENERGY SAVING OF BILLBOARDS

Bo-Chang Lin, Wen-Hsien Kao, Jung-Tsung Hung,Jia-Ming Yang, Xin-Zhang Huang, Zhong Zheng-Feng (Taiwan)


Description. When the wind is too strong, this invention can automaticallyadjust the opening angle to prevent the damage of billboards, and it can detectthe intensity of light outside, can automatically switch lights to achieve the energysaving.

28 XI

2.17. ` `

.. , .. (. , ) .

109074, , , .9 (495) 698-13-71. ,e-mail: [email protected]

. , - , . , - , -, - -, .

2509913 20.03.2014 .

2.18 ` HEAT COMBINED SOLAR PHOTOELECTRIC GELIOPROFIL

.., ..(., )

299053, ., . , 33

www.sevsu.ru, e-mail: [email protected]

. , - , 1/3-1/2 . - - -. : 45 70; 30 100 %; (760 30) . .; . - - , -, . 40 70 ; 700 /. ; -

29XI

150 /. -, ; 3 , 1. 150121(2015).

Gelioprofil is a combination of thermal profiles and silicon cells locatedbelow the receiving surface of the absorber filled with 1 / 3-1 / 2 part. Thecombined profile is designed to convert direct and diffused solar radiationinto thermal and electrical energy in order to further its use in heat supply.Gelioprofil designed to operate in a climate parameters: fluid temperaturefrom -45 C to + 70 C; relative humidity of 30 to 100%; atmospheric pressure (760 30) mm Hg. rticle; air speed is not limited. The main consumersare gelioprofilya construction and assembly companies that assemble thesystem heat supply, ventilation and air conditioning systems in residential andindustrial areas. emperature from + 40 C to plus 70 C; specific heatproduction - up to 700 W / m profile;specific production of electric power -up to 150 W / sq. m receiving surface filled photocells;profile length 3 m,width 1 m.

30 XI

3.` /

GENERAL MECHANICS AND MECHANICALENGINEERING

3.1. THE WHEEL CAR INSTALLATION OF ALL SIZES NUTS(ABLEX )

Mohamed Mahmoud Abla (Cairo, Egypt)The Egyptian Society for Women & Youth Inventors

under The Egyptian Inventors Syndicate)Egypt, Alex, 8.El Falaki St.box 2111

ph.: 00201002709641, e-mail: info@mohamedabla .com

Description. Is a device around the wheel of the car and the installation ofall sizes and all the preparation of the nuts and sizes.In all its forms and degreesof different angles compound in a single device To reduce the voltage on theuser and the completion and installation solution in record time. Patent No.:2009/456.

3.2. ` MATCH FOR A TORCH FROM POROUS METAL WITHSUBMICROCRYSTALLINE STRUCTURE

.. (. -, )

,. , . -, , 424000

. (8362)686801, -mail: [email protected]

. , (, .) - -. - -, - . - , , -

31XI

. - . - .

The torch design based on a way of supply of fuel (kerosene, alcohol, etc.) atthe expense of infiltration of fuel through a high-porous metal core withsubmicrocrystalline structure is developed and the manufacturing techniquesof such cores are developed. The uniform capillary structure of a porousmaterial provides equal and stable burning a flame with elevated temperature,due to a possibility of use of fuel with a heat of burning. The developedtechnology provides reduction of cost of a torch, as a result of use of not hard-to-get cheap raw material and enough cheap technology, service of anarrangement becomes simpler. Heat resisting properties of a material definepractically unlimited service life of a torch. Development concerns to technicsof ignition of liquid fuel.

3.3. METHODS FOR THE PRODUCTION OF A NEW GROUP OFBIOMATERIALS WITH SPECIAL PROPERTIES

Michal Szota, Justyna Klimas, Adrian Lukaszewicz, Marcin Nabialek,Marcin Dospial, Pawel Pietrusiewicz (Poland)

Czestochowa University of Technologye-mail: [email protected]

Description. A new method for the preparation of alloys using the injectionmethod, allows to obtain massive amorphous materials. The method involvesinjection of the fact that the metallic material in liquid form is injected intothe mold copper. Technology production consist few steps: pre-melted ingotplaced into a quartz capillary, induction melting, injection into the coppermold under gas pressure. Cooling of the melt placed in the copper mold hasmileage radial. The advantages of this method are: performing a full productioncycle in a short period of time, obtaining a high vacuum, High-cooling coppermold, production of massive amorphous samples, continuous adjustment oftemperature of the copper mold in the range of liquid nitrogen temperature toroom temperature.

3.4. THE USING OF INJECTION METHOD TO THEMODIFICATION OF TITANIUM ALLOY TI6AL4V

Michal Szota, Adrian Lukaszewicz, Justyna Klimas, Marcin Nabialek,Marcin Dospial, Katarzyna Bloch (Poland)

Czestochowa University of Technologye-mail: [email protected]

32 XI

Description. The method used for preparing a titanium alloy Ti-6Al-4V,impact on the kind of the resulting structure. Which in turn affects the propertiesof material. Method of continuous casting provides conventional alloy withcrystalline structure. Rapid cooling during the injection casting, allowsproviding the partly amorphous and disordered structure. X-ray qualitativeanalysis confirmed the types of structures obtained, depending on the methodof producing. In both cases disclosed peaks of alpha and beta phases: Ti andTi . Evaluation of surface topography, allowed to conclude that the greaterextension of the surface is characterized for alloy formed by injection. It hastwice the roughness than the alloy obtained by the conventional method. Higherroughness affects the process of fusion implant with living tissues in the body.Analyzed titanium has a higher resistance to abrasion (injection method) thanthe alloy produced by the conventional method. The resulting alloy Ti-6Al-4V injection method has better performance in terms of medical, than thesame alloy produced by the continuous casing.

3.5. `

. , . , . , . (. , ) -

. , 28 . , 614038.: (342)262-70-19, :(342)284-53-98


. - - . , - , - - . , , . -: - , , - ( 2030%), .

2328643.

3.6.

. , . , . , . (. , )

33XI

- . , 28, . , 614038, .

. (342) 262-70-19, (342) 284-54-54,e-mail: [email protected]

. - - . - . - , , . - - . `: , -.

2321762, 2006134145 25.09.2006, - 2538154, 2013150004 08.11.2013.

3.7.

. , . (. , ) -

. , 28, . , 614038, .

. (342) 262-70-19, (342) 284-54-54, e-mail:[email protected]

. , , - . , , - , - , - , , , , . - , - .

` : 2513063, 2013107902 21.02.2013.

34 XI

3.8. ` (EWAVES)THE SOFTWARE FOR NONDESTRUCTIVE EVALUATIONMETHODS USING ELASTIC WAVES

.., .. , .. , .. (. , )

, , 149, . , 350040.

.: (861)235-36-10, -mail: [email protected]

. - - . - - , - ( ), , (- ) - , (, ). - -. - , , - . `-: . : 2010617164 20.05.2010 ., 2011612658 31.03.2011, 2012617865 31.08.2012, 2012618995 05.10.2012, 2014610488 10.01.2014, 2014617356 17.07.2014, 2015610643 15.01.2015.

The software developed by IMMIKubSU (http://immi.kubsu.ru) simulatesdynamic behavior of multilayered elastic composites with inhomogeneities andpiezoelectric transducers. The software can be applied for quality control atmanufacturing stage of thin metallic and composite structures, design of newcomposite materials (determination of elastic moduli), nondestructive evaluationmethods using elastic waves (identification of fatigue cracks) and evaluation ofultrasound scattered by inhomogeneities, e.g. geophysics and seismology.Thedeveloped software has independent modules and it allows creating additionalprocedures for coupling with the finite element method solutions.An experimentalvalidation of the results obtained with the developed software has been providedand it has been successfully used in a number of research projects.

35XI

4. , ,

`/NEW MATERIALS AND INSTRUMENTS, APPARATUS

ENGINEERING

4.1. HIGH-STRENGTH SPARINGLY ALLOYED COLD-RESISTANTROLLED PRODUCT FOR SHIPBUILDING AND DEVELOPMENTOF ARCTIC SHELF

.`. , .. , .. , .. ,.. , .. , .. , .. ,

.. , .. , .. (. , ) , . , 30, ., ,

, 162608.:+7-921-252-53-58, (8202)53-32-75 e-mail: [email protected]

. - `, - , ; , , - ; - , - ; - - - ; , - - . - : , - ; ; , -50 ; -- ; ; - . ` : . 2562734 12.05.2014.

36 XI

Process technology has been developed and implemented for production ofhigh-strength cold-resistant rolled products of AB-type steel to obtain goodresistance to brittle fracturing particularly under the conditions of harshfluctuations of temperature and load; resistance to lamellar cracking of theparts of welded structures particularly when high level of tensile stresses actin the direction of plate thickness; high resistance to alternating loads causingcyclic stresses in steel structures and resulting in fatigue cracking; highresistance to corrosive and mechanical damages and corrosive and erosivewear; good weldability enabling manufacture of large-sized structures usinglarge units and sections and their assembly at low temperatures at the opensites. High-strength sparingly alloyed new generation steels are used forconstruction of ships including Arctic ships; high-load steel structures; drillingrigs operated at temperatures -50 and below in sea-water corrosiveenvironment; in fuel and energy industry, transport and heavy machineryengineering, bridge construction engineering and in other industries.

4.2. ` METHOD OF MANUFACTURING OF HEAVY PLATES OF LOW-ALLOYED STEEL WITH IMPROVED CORROSION RESISTANCE

.. , .. ,.. , .. , .. (. , )

, . , 30, ., , , 162608

.:+7-921-252-53-58, (8202)53-32-75 e-mail: [email protected]

. - 39 DNV450 SFDU. - - , - . , - - (), - - , -, , , , -

37XI

. , -, . - , . - 2200 , - . ` - : . 2544326 09.01.2014 .

Process technology has been developed and implemented for production of39 mm skelp of low-alloyed steel grade DNV 450 SFDU. The developmentof manufacturing technology was based on physical analysis of structureformation and phase transformations in low-carbon low-alloyed steels. Incourse of work modern research equipment and investigation methods wereused: assessment of rheological properties and plotting of austenitedecomposition curves and continuous-cooling transformation diagrams whichwere used for adjustment of temperature and speed parameters of rolling andaccelerated cooling and enabled obtaining of optimum composition andmorphology of phases in the metal and make full use of such methods ofstrengthening as microstructure grain refining, solid-solution strengthening,precipitation age hardening, dislocation and texture hardening. The mainconsumers of high-strength skelp are pipe mills producing pipes for oil andgas industry and construction industry. This product is unique in the sensethat it was specially developed for use in the offshore area of the Black Sea.The skelp is designed for transportation of oil and gas via underwater pipelinesat a depth up to 2200 m, provides reliability and long operating life of thepipeline in the aggressive underwater environment.

4.3 ` BOLTS WITH NORMALIZED EFFORT OF GRIPPING

.. (. , )

, , 37, . , , 03056.

. +380667486565, e-mail: [email protected]

. - . , - .

38 XI

- , - . ` -: .

94872, 95311.Working capacity of the machines and mechanisms substantially depends

on reliability of the carving connections used in their design. Simple andeffective designs of bolts with normalized effort of gripping which providecertain value of effort of bolt connections gripping are developed. Thus thenormalized effort of bolts gripping thanks to possibility of smooth change ofthe area of a cut of safety elements can be regulated continuously (no-step)that essentially expands technological possibilities developed bolt connections.

4.4 ` EFFECTIVE PACKING ELEMENTS OF HEAT AND MASSTRANSFER APPARATUSES OF FOOD AND CHEMICALMANUFACTURES

.. (. , )

, , 37, . , , 03056.


. , - - , - , -. - , - . - , , , ,, . `-: - . 62163,68041, 71358,71359,72532,73415, 75745, 80147, 83712, 97216, 97233,97518, 97552 .

Division of systems steam-liquid, gas-liquid and liquid-liquid in thefood and chemical industry is carried out mainly in the packing columnapparatuses, different by simplicity, and also high efficiency and productivity.

39XI

Contact elements of such apparatuses are the packing elements which designsdefine overall performance of the equipment as a whole. Simple inmanufacturing and operation packing designs are developed. These packingelements provide effective carrying out of such processes as absorption,desorption, rectification, distillation, extraction.

4.5. FORMING UNIT OF A PRESS FOR MAKING OF FUEL ELEMENTS

.. (. , )

, , 37, . , , 03056.


. - ( ) - , , ,, .. - - - . - (, , ). ` -: . 93165.

Design of a forming head of a press of continuous action (a screw extruder)is developed for manufacturing of fuel briquettes and granules, for example,from a waste of processing of wood, peat, coal, etc. Simple enough inmanufacturing and operation the forming head provides reception of densefuel elements with a continuous wall and the developed internal surface of thestable form. Using of the given technical decision essentially improvesoperational characteristics of received fuel elements (keeping, transportability,high specific surface).

4.6. , - PRODUCTION OF POWDERS FOR ADDITIVE TECHNOLOGIES,PYRO- AND POWDER METALLURGY

.. , . . (. , )

40 XI

71 / 1, . , . , , 454031

.: +7 (982) 334-2092, -mail: [email protected] 28, 2, . , . , , 454047.

.: +7 (919) 113-6039, e-mail: [email protected]

. , - . , , - - , , -, . - , - . , . - 2457079, 113198.

Developed a method of making powder materials, combining processes ofcutting a workpiece on metal-cutting machine tool with a rotary tool and grindingallowance for fractions of grooves on circular cutting blade. Technology providescutting obtaining raw materials in the form of a powder, powder, nibs and fibersfor use in additive technology and powder metallurgy in the manufacture ofparts, in pyrometallurgy, chemical, paint and other industries. Control of thegrinding process is performed by the geometry of the grooves on cutting thecups, the parameters of their installation relative to the workpiece and the cuttingconditions. Grinding technology is characterized by specific fuel consumptionfor grinding is lower than that of the molten metal up to two orders of magnitudeat high performance and contains knowhow.

4.7. HIGH RESOLUTION QUANTIC BIOMAGNETOMETER

Octavian Baltag, Miuta Rau (Iasi, Romania)National Institute of Inventics Iasi, Romania

ph.: +40 722 657674 +36 20 945 8078 T Tel.: +36 20Ghibanescu, # 5A, 700030 Iai, Romania


Description. Inventions relate to a family of SQUID type gradiometers andquantum magnetometers for measuring magnetic fields with applications in

41XI

medicine and biological research. The invention relates to a second-orderSQUID gradiometer and to a calibration method. According to one embodimentof the invention, the gradiometer comprises a complex SQUID transducercomprising, in its turn, a SQUID sensor magnetically coupled to a fluxtransformer including in its structure three superconductive measuring coilswhich are connected to form a structure of one second-order gradiometer andtwo first order gradiometer, these coils being arranged axially in parallel planesand being serially connected to an input coil which is inductively coupled tothe SQUID sensor. Patent application No. A 00739 / 2012, A 00386 / 2013.

4.8. DEVELOPMENT OF AN ECOLOGICAL DYEING PROCESSFOR YARN, DENIM FABRIC, JEANS APPLICABLEATTINDUSTRIAL SCALE BASED ON VEGETABLE ANDNATURAL DYES VEGDENIM

Corneliu E. Savencu, Gabriel Martinescu,Vasile Martinescu, Ramona Savencu (Iasi, Romania)

S.C. PLASTPROD SRL 707250, Holboca, jud. Iasi, Romania,ph. +40 232 278 792, +40 745 849 647


Description. Created in the program: Partnerships in priority areas (materials,processes and innovative products) the Era Net CROSSTEXNET project, ina partnership with MODAZEN Turkish company, is focused on gettingindustrial methods of extraction and concentration of dyes from plants,

42 XI

machinery realization and its automation, creating the possibility of makingreal-time adjustments to production parameters (concentration repeatableextraction time, pressure, temperature, ...) and providing solutions for reducingthe environmental impact on the surrounding environment, impact producedby textile technologies and equipment serving these technologies.

4..9. ` ` ENERGY SAVING AND ADAPTIVE DEVICES OF INDOORAND EXTERNAL LIGHTING

.. (. , )

367015, . , ..,70..: (8-8722) 62-37-61, 62-37-97, e-mail: [email protected]

. -, , . - - , , . , . - - . , - -. -, . `-: , .

The offered development provides good illumination, uniformity, favorablyaffects sight and is much more economic than the means of lighting used atthe moment. The size of external and internal illumination is arranged underthe surrounding environment and has the big range of settings, as years fromtime to time, and on hours of days. The size of external and internal illuminationis arranged under the surrounding environment and has the big range of settings,as years from time to time, and on hours of days. Fluctuations of sizes ofillumination during the day depend not only on time of day, but also on overcastchange. Adaptability of lighting is reached by means of modern means on thebasis of microcontrollers and microprocessors. With application of these knotsadaptive algorithms which will allow to operate illumination depending onexternal and internal a factor and events are developed. Management of powerpart will be based on elements of power electronics, namely on the basis offield transistors with small power failure.

43XI

4.10.

. , . `, . ,. , . (. -, )

- 199106, , . -, -, 21, . 2

./: + 7 (812) 328-86-16, www.spmi.ru,-mail: [email protected]

. - , - , ; , , -, ; . - , , - . - , . ` : - ; ; .

4.11. THE TECHNOLOGY OF MANUFACTURING PISTON RINGSENGINE INTERNAL COMBUSTION OF THE POWDERMATERIALS BASED ON IRON

`. . (., ) ,

. .,70, . , 367015.: (8-8722) 62-37-61, 62-37-97


. , - , - , . 2-3 , . , - -

44 XI

. : ) - ; ) - ; ) -, -, .

Piston rings made of powder materials based on iron, to provide the sealmates with the piston cylinder, while at the same time their mobility. Pistonrings made of a powder material based on iron approximately 2-3 times moretechnologically advanced and have more elastic and wear-resistant propertiesthan the corresponding cast-iron counterparts. This is due to the tight fit of thering to the bore, small gaps between the rings and the walls of the grooves ofthe piston and the labyrinth action set of rings. Based on the analysis of data inthe field of modern condition of receiving powder materials based on iron,you can make the following conclusions: a) the manufacture of parts frompowder materials based on iron remains one of the leading trends in powdermetallurgy; b) should be considered as a promising research in the field ofselection and changes the chemical composition of the powder materials forthe manufacture of piston rings; (C) prospects of research aimed at thedevelopment of scientific and experimental approach for the optimization ofthe chemical composition of sintered materials and opportunities knownprocesses of surface strengthening, with reference to components from powdermaterials.

4.12. RESEARCH SPECTRAL CHARACTERISTICS HYDROGENATEDAMORPHOUS SILICON FILMS FOR SOLAR PHOTOENERGETICS

. . (. , ) ..

. , 295050..: +7 (978) 720-0069, -mail: [email protected]

. . -

45XI

() , . , . , : - % - .: , -, . - , -. , 1,4 2,4 ( ), , - .

One of the main alternatives of traditional methods of producing energy issolar energy. Solar cells (SC) the basic devices of solar energy are based oncrystals, amorphous and organic matter. Modern solar cells are not exhaustedtheir potential as theoretical efficiency. Because it is much higher than arerealized in practice. From this it follows that the purpose and objective of myresearch was to: onsider the practical spectral characteristics hydrogenatedamorphous silicon films with different % content of hydrogen and to deducetheir according to parameters depending on process conditions.

Conclusion. We can say that by optimizing the thickness of the functionallayer and the hydrogen content can be changed absorption spectrum of thestructure. That is a certain kind of SC, we can create a functional layer withthe required parameters, simply by changing the thickness and concentrationof hydrogen. The hydrogen concentration in the magnetron plasma affects thebandgap from 1.4 to 2.4 eV (depending on the process), as well as for energytails, reducing them with increasing the hydrogen content in the structure.

4.13. ANTIFRICTIONAL COATING

.. , .. `,.. `, ..

(. , ) ..

, 1, 3, . , 19991 ..

.: + 7 (495) -723-8830, -mail: [email protected]

46 XI

. , -. . - , - : , , - . - 4 - . ` : - , . 2230238.

It is developed, not having analogues an antifriction coating. On technologyof receiving the nanostructured carbon material is alloyed by tungsten. Theinvention belongs to area of receiving constructional materials which can beused in all spheres of mechanical engineering: aviation, automobile,shipbuilding and railway mechanical engineering. On wear resistance in 3times exceeds level of coatings technologically used today.

4.14. `NANOCOMPOSITE COATING YAMBURG

.. , .. `, .. (. , )

.. , 1, 3, . , 19991

..

.: + 7 (495) -723-8830, -mail: [email protected]

. , - . - - . - , - : , -, , . - - . ` : , . 2230238; 201512566.

It is developed, not having world analogs a nanocomposite coatingYamburg. On technology of receiving a nanocomposite coating Yamburgtreats nanotechnology of the combined synthesis. The invention belongs toarea of receiving resource-saving constructional materials which can be used

47XI

in all spheres mechanical engineering: aviation, automobile, shipbuilding,railway, etc. On resource-saving and antifrictional properties a nanocompositecoating Yamburg much exceeds all world analogs.

4.15. AN AUTOMATION TOOL FOR TESTING ANDROIDAPPLICATIONS

Edward T.-H. Chu, Jyun-Yan Lin, Guan-Yi Li,Chin-Hung Lin, Heng-Chih Hsieh (Taiwan)

e-mail: [email protected]. We developed an automation tool for testing Android

applications, named GREAT, which automatically record gesture events andgenerate a test script from those recorded events. The test script can be infinitelyreplayed. An automated verification function were also developed to verifythe correctness of the app by comparing the appearance of the screen with thecorrect screen image. After the test process, GREAT will generate a test reportto assist companies to evaluate failures and interactive experience.

4.16. MULTI-ELECTRODE MEASURING SYSTEM

Jung-Chuan Chou, Wei-Chuan Chen, Cheng-Wei Chen, Chien-Cheng Chen, Yu-Jen Lin (Taiwan)


Description. The invention provides a multi-electrode measuring systemincluding a front end device which is a sensing device including a multi-electrode sensing device having a plurality of electrodes; a multi-channel fixturecoupled to the multi-electrode sensing device; and a reference electrode. Aback-end device is an electronic device including a read out circuit devicecoupled to the multi-channel fixture and the reference electrode for receivingeach original signal from each electrode of the multi-electrode sensing deviceand the reference electrode determining a sample solution; a data acquisitiondevice coupled to the read out circuit device for digitizing each the originalsignal to form a digital signal and array sampling; and a signal process devicecoupled to the data acquisition device for processing each signal.

4.17. THE CONTROLLABLE SWIRL JET MECHANISMFOR ASSISTING LASER MICROMACHINING

Chao-Ching Ho, Chia-Lung Kuo, Yuan-Jen Chang,Jin-Chen Hsu, Ke-Ying Shen (Taiwan)


48 XI

Description. The present mechanism provides a new function, adjusting theswirl jet, so that the debris would be removed and the laser would be notblocked. Furthermore, it has good efficiency of laser micromachining anddebris removing. Traditionally, the processing by the laser light would producea lot of debris, which block the laser light or attach on the surface of workpieces, and affect the efficiency of processing. Different from the previousdevices, the present system uses the several outlet tubes and inlet tubes whichthe switch time can be controlled. The purpose of the four inlet tubes is toproduce a swirl jet that can extract the particles into the inside of nozzle.Eight outlet tubes are used to exclude the particles. Additionally, there wouldappear pressure difference in the different positions by using the four inlettubes which control the switch. Thus, this mechanism could improve theproblem which debris partially removing and laser light blocking.

4.18. HIGH-SENSITIVITY INSULATION RESISTANCE DETECTIONMETHOD AND CIRCUIT FOR UNGROUNDED DC POWER SUPPLYSYSTEMS

Yow-Chyi Liu, Yong-Lin Lee, Jia-Hong Jiang, Shao-Fan Su, Min-Wei Lin, Jia-Wei Zhang (Taiwan)


Description. A single ground fault does not arise from the system is forminga short circuit, thereby allowing it to still power to the loads. Importantly,power supply systems stop working when a insulation fault occurs in two ormore points. Ungrounded DC power systems are used in some applications toavoid the effect of line to ground of solid grounded and low-resistance groundedsystems. This invention proposes a DC current injection method for detectingground insulation faults.

4.19. INNOVATIVE MULTI-FUNCTIONAL KNITTED FABRICSWITH A THREE-LAYER STRUCTURE AND MODERNIZATIONOF KNITTING MACHINE FOR THEIR PRODUCTION

Romualda Kozminska, Jolanta Janicka, Agnieszka Walak,Elbieta Mielicka, Violeta Jarzyna (Poland)

Textile Research Institute5/15 Brzezinska Str. 92-103 Lodz, Poland


Description. The essence of the invention consists in manufacturing three-layer knitted fabrics containing two layers with mutually independent structures

49XI

combined with loop links in the same technological process (the third middlelayer) and establishing the types and parameters of yarns of which the fabricswere produced with the use of a standard rib knitting machine aftermodernization. The technical modification of the rib knitting machine formaking three-layer knitted fabrics included technical changes in the zones ofyarn feeding, knitting, fabric receiving and setting the distance of machinedisc and cylinder in order to maintain the distance zone between fabric layersamounting to about 3 mm. To impart special functional properties to the tree-layer knitted fabrics, modified yarns were used to provide required protectionagainst static electricity and hot conditions as well as mechanical strength andresistance to abrasion, antibacterial features and comfort of use. The developedprocess of producing multi-functional three-layer knitted fabrics with the useof high-performance chemical and natural fibers makes it possible to modifythe structures of particular fabric layers depending on the range of protectivefabrics and related standard requirements. The three-layer knitted fabrics aredesigned for functional clothing or clothing elements as well as for protectiveclothing against environmental hazards and improving everyday comfort oflive. The research work were developed within the international project Eureka!BATAN 5799 Barrier textiles and nanomaterials, which were co-financedthrough the National Centre for Research and Development (NCBR). Patentstatus/number: This invention is the subject of a patent application in PolishPatent Office (UP RP) Nr. P.406791 (07.01.2014 r.)

4.20. PROCESS OF PRODUCTION A COMPOSITION OFCHEMICAL AGENTS CONTAINING SILVER NANOPARTICLESDESIGNED FOR ANTIBACTERIAL TEXTILE FINISHING

Textile Research Institute5/15 Brzezinska Str. 92-103 Lodz, Poland

e-mail: : [email protected]

Description. The object of the invention is a process for the production ofantibacterial composition for finishing textiles of natural or chemical fibers orblends of these fibers, excluding polyacrylonitrile and polypropylene fibers.The initial product consists of a composition of colloidal solution of metallicsilver particles in petroleum spirits. The silver particle size is below 100 nm.This composition is mixed with butyloglycol and water to obtain a solutionwith a concentration of 0.1 % of silver particles, which in combination withspecified quantities of non-ionic bonding agent, anionic thickener, emulsifierand non-ionic cross-linking agent forms a mixture with silver particlesconcentration = 50 ppm. The composition obtained protects against theaggregation of silver particles, showing the stability of aggregate size in time.

50 XI

The products maintain antibacterial features during storage for a period of 6months. Antibacterial properties are imparted to textiles by the padding methodwith the newly developed composition of chemical agents containing silvernanoparticles. The antibacterial composition is characterized by a higheffectiveness and the textiles finished with the use of it show a high antibacterialactivity resistant to prolonged laundering processes. The research work weredeveloped within the international project Eureka! BATAN 5799 Barriertextiles and nanomaterials, which were co-financed through the NationalCentre for Research and Development (NCBR). Patent status/number: Theprocess of making the chemical composition containing silver nanoparticles,designed for antibacterial textile finishing is protected by Patent Application402690 of 06.02.2013 in the Patent Office of Poland.

4.21. TEXTILE SUPPORT FOR DEPOSITION OF UNIFORMLAYER OF CELLULOSE NANOFIBERS, ESPECIALLY FORMEDICAL APPLICATIONS

Anna Pinar, Romualda Kozminska, Bogumil Swiderski,Bogumil Laszkiewicz & Piotr Kulpinski (Poland)

Textile Research Institute, 5/15 Brzezinska Str., 92-103 Lodzph: (+48 42) 616 31 00; e-mail: [email protected]

Description. The subject of the invention is the textile support made by thewarp knitting technique from the textured synthetic fibers designed for uniformlayer deposition of cellulose nanofibers. Nanofibers were done by means ofdry-wet method from the cellulose dissolved in N-methylmorpholine N-oxide(NMMO) during electrospinning process. The nature of the invention is theuse of spatially developed textile support with the fibrous cover, that by itsporosity and special surface properties makes possible to obtain the uniformlayer deposition of cellulose nanofibers. Mentioned textile support is appliedfor the winding up of nanofibers collected from the solidification bath. Thetextile support makes possible to obtain uniform arrange of nanofibers, andfinally to obtain uniform layer of micro-nonvowen after the water desorptionprocess. The structure of textile carrier was obtained by the multiple-needledwale-left-right-knitted by warp knitting technique. The component weaveswere made of complex combination of basic elements of stitch with linkslength of at least one wale width and/or weft with projection behind one needleat least. The textile support can be used as a hemostatic and antibacterialnonvowen material for medical applications modified in spinning solution ofcellulose in NMMO.

Patent status/number: No P.396907 (07.11.2011); Polish Patent Office; TextileResearch Institute

51XI

4.22. `

`.. , .. ` (. , ) .

109074, , , .9 (495) 698-13-71,e-mail: [email protected]

. - - . - - , , - , , - , , , , - -, -, - , - , , -, . 2544169 19.02.2015 .

4.23. ` `` THE METHOD FOR TREATING MATERIAL BY CUTTING

.. , . . , .. , .. (. --, )

,. , 1, . --, , 344000


. - . -

52 XI

. - , -, - , . , (- 2 ). : -. `-: , . 2496903 (2013).Selects the brand of solid carbide alloy for cutting tools. Is to calculate theentropy values for each group are reasonable for the conditions of applicationof insert grades. By comparing the calculated values of entropy with entropyalloy, base for the processed material, is chosen as a material for cutting toolscemented carbide with a value of entropy that exceeds the entropy of the basealloy. Provides simplification of the choice of the brand cemented carbide,while ensuring maximum durability of the cutting tool (increase to 2 times).Applications: machine building and metalworking.

4.24. ` METHOD OF DETERMINING THE OPTIMAL CUTTING SPEED

.. , . . , .. , .. ,.. (. --, )

,. , 1, . --, , 344000


. - . , -- ; ; , - , - , - , - -, - , -

53XI

. - . : . 2521943 (2014).

Intended for selection of optimum tool life cutting speed. Is that for a pair oftool-part at different speeds determine power fluctuations or power utilizationfluctuations; or an analog of the entropy production from thermal processeson contact; in this case, the optimal value of the cutting speed correspondingto minimum wear rate of the tool is determined by the maximum value of thepower fluctuations is obtained on the curve of change of the complex powerfluctuations or at the point of fracture utilization power fluctuations obtainedon the curve of change of the complex utilization of power fluctuations, or theminimum value of the analogue of the entropy production from thermalprocesses on the contact received on the curve complex analogue of the entropyproduction from thermal processes at the contact. Allows to improve theaccuracy of selection of optimal cutting speed in the selection of tool materialfor maximum wear resistance. Applications: machine building andmetalworking.

4.25. ` HARD ALLOY BASED ON TUNGSTEN CARBIDE

`.. , .. , .. , .. `, . . ,.. , .. , .. , .. ,

.. (. --, ) ,

. , 1, . --, , 344000e-mail: [email protected]

. . - - , , . ( 3 HRA) - ( 2 ) . 2532776 (2014), 2531332 (2014).

Intended for the manufacture of cutting tools. Based on the introduction tothe recipe adenocarinoma hard alloy additives of molybdenum, titanium, ironand copper. Allows you to increase the hardness of the cemented carbide (upto 3 units HRA) compared to the baseline standard brands and thereby toincrease the resistance (up to 2 times) of the cutting tool.

54 XI

4.26. INDICATOR FILMS FOR DETERMINATION OF LEAD

. . , .`. , .. (. , )

, , 149, . , 350040.

.: (861)235-36-10, -mail: [email protected]

. , . - . , - (II) , ( , ), - . , , , , , - . - (- ): , 2529660.

One of the most dangerous pollutants of environments is lead as itstechnogenic accumulation in environment goes accelerated. Toxicity ofcompounds of lead and its ability to collect in a human body demands providinga permanent control and an assessment of its contents in objects of environment.The indicator films allowing to carry out definition of lead (II) in objects ofenvironment for monitoring (natural waters, soil extracts), express testdiagnostics and everyday control are developed. The offered approach differsin simplicity, sensitivity, speed, availability, and does not demand use ofexpensive materials and equipment that is especially convenient in massanalyses.

4. 27. ELECTROMETRICALLY ION METER

.. `, .. , .. (. , )

` , , 149,

. , 350040..: (861)235-36-10, -mail: [email protected]

55XI

. - - . - . - , , -, , , -. , -. - -. - . ` -: . 152732.

The Electrometrically ion meter aimed at creating electronic devicemeasuring various physical and chemical quantities of biological objects andallows the quantitative analysis of the values ??of their electromotive force.Development refers to the measurement technology, and can be used inagriculture, soil science, medicine, biology and food industry, including thecontrol of ion concentration of nitrate in fruit and vegetable production. Theproject is based on the authors method of direct measurement of the resistanceof the investigated medium, determines the amount of the compounds in theenvironment and the design parameters of the device, which led to eliminatethe effect of non-linearity of the detector and the sharp increase in accuracyand error measurements.

4.28. ` `THERMOREVERSIBLE FREE PISTON ENGINES

.. , .. (. , )

299053, . , . , 33


. -, -. : - , -, ,

56 XI

- -, . , -- -- , - . , - , , , - .

The method works free piston engines, powered by an external supply ofheat without displacing piston. The engine operates as follows: the thermalenergy is applied to the gas, which is located in the heating chamberthermoreversible engine, creating longitudinal waves of compression andexpansion gas, resulting in reciprocating movement of the movable pistondisposed with the open part of the cylinder. Then, the reciprocating motion isconverted by the crank mechanism into rotational motion of a flywheel, orused directly. This engine has a number of advantages in comparison withclassical engines operating on the external heat input is low cost, ease ofmanufacture and tuning, as well as a long service life.

57XI

5., , ,

/TRANSPORT, BUILDING, DESIGN, MUNICIPAL ECONOMY

5.1. -

(. , )


. - - . , : 1.? .2.? . .) ` . .) - . .) - . .) , . 3. .) .) , . 4. - . 5.- . , - , . - - 36 (- 1), . , . - 2-3 . 25 .

58 XI

. , - , -, - . , - , . 1 . , -, . - - . - 16 . - 40- 45 . . 80 . . 1

.

5.2. ` MODULAR LANDING GEAR

.. , .A. (. , )375012,,. 19,.2

:+37493 48 36 98,+37410 27 00 09e-mail: [email protected]

. - , ..233857 - , ..1731719. , - , , - . , - . - , -, . -, .

Prefabricated modular designed landing gear landing gear of two couplesend levers, united into a single design by a.s. no. 233857 Capture for productswith apertures entered the oppozitivno tabs on a.s. no. 1731719. The chassisconsists of two carriages, which are set forth on the axis of the front wheels inpairs of small diameter and the rear pair of wheels with a larger diameter to

59XI

ensure a smooth transition during take off with the front pair of small diameterwheels on the rear pair of wheels, and when landing-on the back a couple ofwheels and moving to the front pair of wheels. The ammortizirusij effect,peculiar only to design a modular chassis. The simplest chassis assembly usingidentical end levers number in fasteners, which considerably simplifies theprocess of assembling the chassis. extended resource durability of steel strutsof rolled-up eyes end of levers, which embody two axis trolleys with pairs ofsmall wheels and larger diameters.

5.3.

.. , .A. (. , )375012,,. 19,.2

:+37493 48 36 98,+37410 27 00 09e-mail: [email protected]

. - , , ..240973 , - ..1245448 ` - , , - , . - - 092, - , - , , .

Single axle trailer vehicles designed with a minimum number of parts,pivotally connected to a unitary structure from a pair of gripping arms towardseach other oppositely by certificate of authorship 240973 Crane clinch inputcombined pairwise hemispherical cams in circular bearing lug wheel rims onthe basis of the invention, certificate of authorship 1245448 that uncoil themfrom the inside so that hold the bearings without rim bolts reporting whilesupporting frame amortize effect spring return springs. This effect was observedonly in the proposed construction allows for uniaxial trailer vehicles whilereducing the time to build the trailer for repair to the achievement of improvedwear resistance clunching arms of spring steel 09G2S why visually perceivethe obvious advantages of our constructive scheme of the trailer that joints ofthe bolts, which planted spring attached trailer frame

60 XI

5.4 . HIGH-STRENGTH WELDABLE REINFORCEMENT BAR

.. , .. ,.., , .. ,.. , .. (. , )

. , 30, ., , , 162608

.:+7-921-252-53-58, (8202)53-32-75e-mail: [email protected]

. - 600, - , - . - ( -70), (+900), . , - , . - 600 25%. 2478727 02.03.2012 486428 11.05.2012.

Process technology has been developed and implemented for production ofhigh-strength cold-resistant rolled products of steel grade 600, designedfor construction of buildings and structures, high-rise and site-cast concretebuildings and all kinds of reinforced concrete structures. The re-bar can beused in low-temperature climate (down to -70), at high temperatures (up to+900), in increased fire hazard environment and in earthquake zones. Therolled product displays good weldability, high strength and elastic properties,excellent reliability when subjected to unfavorable natural and technogenicconditions. The use of 600 re-bar in construction enables up to 25%reduction in metal consumption.

5.5. SPHERICAL GREEN BUILDING

Hebatalrahman Ahmed (airo, Egypt)The Egyptian Society for Women & Youth Inventors

under The Egyptian Inventors Syndicate)Egypt, Cairo, 13 Al-Zubair bin Elawam, Sadat land Elmalek Elsaleh

ph.: (+2) 01226020076, e-mail: [email protected]

61XI

Description. Design for building element in the form of incomplete sphere,the design save energy. It consists of multiple layers on moving streamsequipped with sensors, the movement of the working layers were controlledautomatically or manually according to climate changes in the surroundingatmosphere. The top and bottom of the layers are installed on several axescentered together. The movements of insulated layers are done by sliding onthe certain channels. Patent no. 571-2010 (Egyptian Patent Office).

5.6. ` THE MODIFIED STRUCTURAL MATERIAL FOR THE DEVICE OFHIGHWAYS

.. , .. (. -, )

` ,

3, . , . -, 424000..: +7 (917) 705-4293, e-mail: [email protected]

. - , - - . - , - , - . - , , -, - . : - , , , , (- ), , - , - ( .. ), , . . 017441, . 2015111162, 27.03.2015 .

5.7. ` FACING HEAT INSULATION STONE

` ( ),214000, . , , .3, .11,


62 XI

. - -- . - - . - , - . - : - , 500-1800 /3 50-250 F25-F200, - , -, . `: , - . - 2478040.

The invention to producing small building materials. The two-layer stonecontains the front and heat insulating base layer. Using a base layer of granularpolystyrene allows to reduce the specific weight, the thermal conductivity andproduction cost. Stone comprises a face layer formed of fine-grained concreteand heat insulating base layer formed by using expanded clay, and polystyrenebeads. The production process involves forming a two-layer semi-dryvibropressing phased backfilling, final molding and curing, requires minimalenergy consumption with high performance. Using a base layer of granularpolystyrene allows to reduce the specific weight, the thermal conductivity andthe production cost. Object of the invention obtaining materials ofmultifunctional purpose: with improved thermal properties, low density of 500-1800 kg/m3 at the stamp strength M50-M250 and frost F25-F200.

5.8. ECO-EFFICIENT ENERGY BUILDING ENVELOPE

Constantin Miron (Iasi, Romania)National Institute for Research and Development in Construction,

Urban planning and Sustainable Spatial Development URBAN-INCERCRepresented by Romanian Inventors Forum

Str. Sf.Petru Movila 3, L11, III/3, 700089, Iasi, Romaniaph: +40.745.438604 fax: +40.232.214816 e-mail: [email protected]

www.afir.org.ro www.eudirect.ro/euroinvent

Description. The invention consists in an energy-efficient and ecologicalbuilding envelope, achieved with water modules in an integrated system, witha multiple role as solar energy convertor, thermal accumulator and self-protection against fire, used for buildings whose energy consumption is ensured

63XI

mostly from renewable sources, through the energy produced by the envelopeitself. As a result of applying this invention, the building envelope acquires amultifunctional role as thermal- and soundproofing closing structure, protectionand mechanical insulation against the exterior, energy convertor generatorfor the heating and cooling of interior spaces, support for the thermal agentthat accumulates and carries energy for cooling/heating, and especiallyimportant, a role in the self-protection against fire, by annihilating any sourceof fire detected nearby through the controlled release of the incorporated water.Patent Application A 2010 01301 / OSIM 1002686/ 28.01.2015.

5.9. ENERGY EFFICIENT, ABRASION RESISTANT CONCRETEOBTAINED FROM RECYCLED WASTE GLASS AND CONCRETEAND ITS PRODUCTION METHOD

Ofelia CORBU, Attila PUSKAS (Cluj-Napoca, Romania)Technical University of Cluj-Napoca

Represented by Romanian Inventors Forum FIR Tel: T +40 745438604

Str. Pinului 10, Iasi, Romaniawww.afir.org.ro, e-mail: [email protected]

Description. Energy efficient, abrasion resistant concrete obtained fromrecycled waste glass and concrete is a construction material with a wide rangeof possible application in road infrastructure, civil works and same, where theimproved characteristics of the proposed composition represent an advantage.The energy efficient concrete mix is produced using waste concrete as recycledaggregates partially substituting natural aggregates-, and using glass wastefor reducing the cement ratio. Due to its composition the embedded energy inthe mix is decreased with respect to the regular road concretes, while theobtained characteristics of the hardened concrete is improved (abrasion,increase freeze-thaw and cyclic heat resistance, fatique, etc.). It can be used inobtaining a wide variety of strengths classes used in road infrastructure, civilworks and same.

At the end of its lifetime the concrete obtained using the proposed mix canbe easily recycled and reused for further concrete compositions, improvingalso in this way its energy efficiency. Novelty of the invention is based on thecombination of the recycled waste used for a new, energy efficient,environmental friendly material. Advantages: replacing nonrenewable naturalaggregates with recycled aggregates; uses glass waste for reducing the cementcontent of the mix; improved characteristics of the composition even usingproperly recycled waste; reduced carbon footprint, improved energy efficiencyagainst regular road concrete. Acknowledgements. This research was supported

64 XI

by the Post-Doctoral Program POSDRU/159/1.5/S/137516, project co-fundedfrom European Social Fund through the Human Resources SectorialOperational Program 2007-2013.

Patent Application PCT/IB2015/052977.

5.10.

. . (., ).:+7-978-708-33-34, e-mail: [email protected]

. - , , - . , (- , , - ) . , , -. , -, , . , , - . - .

5.11. , BIKE WITH DISCRETE PROTECTORS BEARING CONVERTIBLEINTO CULTIVATOR TARON

. . , . . (.,)e-mail: [email protected]

. , - (- 20"/26"/28") :/ / -/ / , -

65XI

), 43 . 1,5.....2,0 ..( . ( ), - , , ( ). (- ) (15..25 ), - ( , - 25.....40 /), 1,5 ..2,5 /100, .

Ruler models bicycle, convertible into ruler cultivators TARON (base-bikes with wheels 20 / 26 / 28 ) and various models: mountain / city /pleasure / folding / young people and, including different price categories),equipped internal combustion engine volume up to 43 cubic meters. See andpower 1.5 ..... 2.0 hp (two-stroke and four.

Motorbike (motokultivatory TARON), with high-tech powertrain achieveextremely compact, lightweight and very comfortable in management (as onsteering wheel is just two arm gas and brake). Benefits motorbike(motokultivatory TARON) compared nzkaya weight (15 .. 25 kg), wayhigh performance (best performance set speed, maximum speed 25 ..... 40 km/ h), low fuel consumption of 1.5 l/100 km .. 2.5, good ergonomics.

5.12.

. . , . . (. , ).: 37410 27-00-09, 374093 48-36-98 e-mail: [email protected]

. , , - , , , ,, , -, , - , - - . `-: . 10850.

5.13. ` ` `WORKING SITE OF TILLERS FOR ROAD WORKS

.. , .. , .. (. , , )

66 XI

.: +7 9043033967, -mail: [email protected] ,

. 4, ., 624194.

. +7 9045493731, e-mail: [email protected]

. - , , . - . - www.pressn.ru. - . , -, - . ` : , . 131743.

The design of the working site for the maintenance and repair of the roadwayin the autumn and spring periods in urban municipal and road sector, roads,airfields. Technology interaction drummers horizontal auger with a dense,wet snow or a thin layer of ice removes it without damaging the roadway. Theresults of field tests are presented on the website www.pressn.ru. Theapplication of the working node eliminates the use of chemicals when roadmaintenance in winter. Alternatively, you can use the site when patching, duringcalibration of the new concrete layer runways or drawing on the roadwaysystem of grooves for improved grip properties of the wheel.

5.14. ` THE BUDGET VERSION SMART HOME SYSTEM

.. ` (. , )

.: +79788529300 e-mail: [email protected]

. ` , . - PowerLine , WiFi . -, .

67XI

, , - , - . , , .

The budget version of currently popular Smart Home System is able tocontrol the temperature and the light level, remotely control appliances andanalyze their condition. The system is equipped with the PowerLine channel,so it does not require a WiFi access point or routing of special cables. Itsinstallation does not require any special skills, and it takes a minimal time.Element base is rationally chosen to minimize the production costs. The lastadvantages are especially important, because they will make the concept ofsmart homes not one-off orders, and far easily to sell kits with high demand.

5.15. ANTI-THEFT SYSTEM

Chettah Faycal (Algeria)Lotissement El Maktoub Route de lArbaa

Sidi Moussa Algiers Algeriatel. : +213 771290622 e-mail: [email protected]

Description. Research has been carried on the development of anti-theftsystem for vehicles, remote sat, and their location and speed. I have alreadyconducted tests on a weight light vehicles. I have managed to stop them at adistance of 1000 Km (from Algiers and vehicle control in Bechar ) in otherhand, another test was done successfully on a truck.

Watch my videos on: http://www.youtube.com/watch?v=i52DCXs3Vd0 andhttp://www.youtube.com/watch?v=BGTKsxFpsnQ. Patent of Algerian nationalinstitute of the industrial protection 5377 (2008).

5.16.

.: +7(495) 968-20-99, +7(495) 922-53-72


. , -- . - : - : , , -; -

68 XI

, , ; - , ; - , ; - - ( ). , - , -, , , - , . . , - , .

5.17. GAZ

.. (. , )e-mail: [email protected]

. , , , - () () . - GAS, - , - . 40 000. ULTRA. - U-- , - , - , - . - 60 000. PLATIN. , . 100000 . - PF - . - - . PF . , -

69XI

( - ). - , . , ( ), .

5.18. `

, (. `, )Institute for Materials Testing of Serbia IMS

Belgrade. e-mail: [email protected] of Belgrade, Faculty of Mining and Geology

Department of Geotechnics, e-mail: [email protected]

. -. - . - , - . - . - , .. . - - . -, , - , - , , - . - , . ` -, : . , - . - . , - , - .

70 XI

6.

/FOOD INDUSTRY AND AGRICULTURE

6.1. `

.. (. , ), , ,

26, . , . , , 295000,. +7 (978) 816-49-52, e-mail: [email protected]

. - .. (.). ` - NaCl 1,5 / - . - .

6.2.

.. (. , ), , ,

26, . , . , , 295000,. +7 (978) 816-49-52, e-mail: [email protected]

. - ..- (. ). ` - 100 /. - .

6.3. SOLAR ENERGY AND LIGHT EMITTING DIODES (LEDS)TO CONTROL AGRICULTURAL PESTS

Rania Ahmed Abd El-Wahab (airo, Egypt) The Egyptian Society for Women & Youth Inventors

under The Egyptian Inventors Syndicate, Egypt, Cairo, Plant ProtectionResearch Institute, Agricultural Research Center

ph.: +2 01226020076, e-mail: [email protected]

71XI

Description. Present invention is depending mainly on the effect of LightEmitting Diodes (LEDs) against certain agricultural pests. LEDs were poweredby solar energy to be able to do its effect in fields and greenhouses specificallyin night when most pests are active. LEDs colors with their differentwavelengths showed that they were successfully able to control pests directlyand also they can attract special predator to each pest and can attract others tothe same pest with other color. Besides, LEDs showed their effect on themetabolic resistance of pesticides in insects and mites. They can stop iteffectively which means little using of pesticides and reduction ofenvironmental pollution efficiently. Moreover, the invention could spray nanoand normal molecules of biocides, if the infestation increased rapidly. Besideso, there are many options to do more tasks would be added later to thisinvention. The instrument has small dimensions as an advantage of taking iteverywhere. Instrument Prototype Parts: 1-Solar Panel, 2-Container Moleculesof battery and the Sprayer of Normal and Nano of Biocides, 3-Power, 4- LightEmitting Diodes (LEDs). Pat. . 571-2015 (Egyptian Patent Office)

6.4. MODELS OF PRACTICAL APPLICATION OF THEORY OFCAUSALITY IN AGRICULTURE

.. , .. (. , ; . , )

010000, , . , . ii 3, . 507.

./:+7 (7172) 26 37 28, +7 777 257 3047. e-mail: [email protected]

. : - ; - ; - , - ; - . - , .

The worked out models plug in itself the order of work sent to the achievementof next results : harmonization of the state of social environment of collectiveof participants of process; renewal of norm is spatial existential descriptions

72 XI

of territories participating in a process; elimination of factors preventing thebeginning of progress, formation and productive productivity in plant growingand animal industries; harmonization of all stages of development of plantsand animals. Beater-type threshing drum. Magnetically treating the edibleportion of the harvest increases the viability, yield and quality of crops andextends the storage life thereof without loss of quality.

6.5. ` : `

.., .., .., ..(. , )

., [email protected]

. , , - , - . ` - , - () , , - - . , , , - . - , - - .

6.6. SWEET CHERRY CULTIVAR COCIU

Petre Ludovic, Gelu Corneanu, Margareta Corneanu (Iasi, Romania)

73XI

Academy of Agricultural and ForestrySciences Gheorghe Ionescu ieti

Research Station for Fruit Growing Iasi, Romaniaph.: T +40 232 214763 20 945 8078 T Tel.: +36 20 os. Voineti nr. 175,

cod 707305, Iai Romnia, e-mail: [email protected]

Description. Fruit: Size: very large (10.5 to 11.5 g). Shape: kidney shape,flattened slightly elongated. Skin color: dark red, almost black at full maturity.Stalk: medium length and thickness. Flesh: red, firm, crispy and juicy, slightlyacidified. Kernel: medium (0.4 to 0.5 g),elliptical shape, non-adherent to pulp. Ripeningperiod: in the second decade of June. Production anduse Agricultural characters: is an early bearingcultivar (bearing from the fourth or fifth yearafterplanting), very productive and constant everyyear. Fruits ripe uniformly, are very large, showy,with high quality, resistant to handling and transport.Use: The special quality of fruits recommended thiscultivar for fresh consumption but also for industrialprocessing in different ways. License Nr. 3367/2.06.2013

6.7. ` --`

., ., ., .(. , )

. ,


. - KZ 28388, - , . - , - . , -

74 XI

, , , - , , . - - . -. - 8 475 / . - , - , - . - - : . ` -: ; - .

Proposed mechanized mobile ice pick snowplow PMI-2010 is mechanizedequipment for harvesting,cleaning and disposal of solid ice and snow cover onthe narrow, limited sections of city areas, like sidewalks,alleys, etc..where noheavy harvesting techniques can reach.Versatility and mobility, as well as easeof operation by one working operator, allows utilities to save time oncleaning,cleanup,freeing the working staff from monotonous physical labor, whileachieving high productivity. Simplicity of the construction and ease of operationallows one operator to clean a large part of territory in a short period of time.Theproposed utility model PMI-2010 allows the adjustment of other removableelements on the working bodies of Rama for oncoming seasons.Thus, the utilitymodel is versatile and its scope of operation can be extended depending on thedestination and the planned amount seasonal work. The proposed mobilemechanized ice pick snowplow PMI-2010 may be required for its practicalapplication in various industries of the economy of our country.

6.8. ` ` `STABILIZATION OF WORKING ENVIRONMENT TEMPERATUREIN THE PROCESS EQUIPMENT

.. (. , )

, , 37, . , , 03056.


75XI

. - , . - , . - , . - , - ( II ), . , , - . - - , . `-: - . 52742, 66592,68042, 68120, 69843, 75172, 84023, 89173 .

Maintenance of a stable temperature mode of the process equipment operationof food, chemical and other manufactures is one of the most important factorsof reception of quality production. A necessary thermal mode of processtraditionally provide by the fluid heat-carriers or electric heaters that providesuse of enough difficult and bulky auxiliaries. The new approach to maintenanceof stabilization of the process equipment elements temperature contacting tostreams processed in it is offered. It is possible to provide stabilization oftemperature of the elements at the expense of their manufacturing fromferromagnetic materials which have Curie point (Curie temperature,temperature of phase transition of II sort), corresponding to temperature ofcarrying out of technological process. As corresponding materials, for example,it is possible to use various binary and others intermetallic materials. Technicaleffect is increase of accuracy of maintenance of a temperature operating modeof the equipment, and also simplification of equipment design and operation.

6.9. ` `

. , . , . ,. (. -, )

- 199106, , . -, -, 21, . 2

./: + 7 (812) 328-86-16, www.spmi.ru, -mail:[email protected]

76 XI

. - - - . ` : - ; ; . : 2393137 (2008), 2441720 (2010), 2013137726 (2013).

6.10. ` UNIT FOR ALTERNATIVE ENRICHMENT OF THE SOILOF NITROGEN IN AGROBIOCENOSIS

.. , . . , . . ,. . (. , )

` ., 18 ., 460014

.: 8(3532)77-58-13, 8(3532)77-58-13 -mail: [email protected]

. . - -, - . . ` : . 2014128734/13 (2014)

A device for the fixation of atmospheric nitrogen agrobiocenosis. The aimof the invention is to provide an electric discharge in a special chamber withoutcontact with the soil, a uniform distribution of the nitrogen oxides producedby the soil surface. Device being tested.

6.11. MOBILE DEVICE OF PLANT WATERING STORAGE RACK

Wan-Pei Hu, Ying-Yun Chang, Ting-Huan Chen,Jia-Ling Cai, Shi-Han Huang (Taiwan)


Description.The device is combined with a plant rack, a hose, wheels, and astorage basin which makes watering more than one plant simultaneouslypossible. To prevent the loss of soil from watering, a sprinkle cap is attachedto the hose. A storage basin is added to the bottom of the device to put awaythings like the hose itself, scissors, gloves and bags of fertilizer and wheelsenable the mobility of the device. The new product is advantageous in termsof its appearance, storage, growing plants, mobility and convenience.

77XI

6.12. GREEN SLOPES MOISTURIZING T-TYPE FERTILIZERSTRUCTURE

Chin-San Wu, Yih-Shan Hung, Xin-Zhu Zheng,Yu-Xuan Cai, Yang Su (Taiwan)

[email protected]

Description. A green slope moisturizing T-type fertilizer structure isconsisted of two vertical fertilizer board body of T type. Fertilizer board isdivided into two floors. The upper group of basal connotation was easier tobreak down, and the lower the growth of inclusion release fertilizer a longtime. The surface of the body plate in fertilizer manufacture many micro holes.These holes facilitate decomposition of the surface water and slowly flowinto fertilizer plant which makes roots easily absorb substance. Thismoisturizing T-type fertilizer structure can block the loss of water and fertilizer,and protect soil from dissipation feature that allows plant roots to maintainadequate water and fertilizer nutrients. Eventually achieve the purpose of thegreen slope.

6.13.

(. , ).: (8652) 315-900 (. 11-66), -mail:[email protected]

. ` . - . -, . , - , AGRIS.

6.14. `` / WIND INSTALLATION THRESHING SAMPLES FOR SELECTIONOF CROPS

.. (. , ) 299053, ., . , 33


78 XI

. - : , , , , , , . , . ` : / ; ; - ; - ; , - . : 79 /-; () 50 ; 300 ;- 0,05 /2.

A method of threshing agricultural crops such as corn, rice, oats, rye, flax,sorghum, lupine and others. The method is based on a new principle - theformation of dissipative structures, followed by oscillatingprotsessom.Blagodarya this device has the following advantages:absolutelyfull threshing