18
PRASHANT KUMAR 15NA30014 Bulbous Bow

BULBOUS BOW

Embed Size (px)

Citation preview

Page 1: BULBOUS BOW

PRASHANT KUMAR 15NA30014

Bulbous Bow

Page 2: BULBOUS BOW

Historical Origin• The bulbous bow was originated in the bow ram , a structure of military nature utilized in war ships on the end of the 19th century, beginning of the 20th century.

Rear view Front viewThe Athlit ram, Israeli National Maritime Museum (2010)

Page 3: BULBOUS BOW

Introduction of the Bulbous Bow

• The first bulbous bows appeared in the 1920s with the “Bremen” and the “Europa”, two German passenger ships built to operate in the North Atlantic. The “Bremen”, built in 1929, won the Blue Riband of the crossing of the Atlantic with the speed of 27.9 knots.

• In 1935, the “Normandie”, built with bulbous bow, attained the 30 knots.

Page 4: BULBOUS BOW

Its Wave Resistance Factor• The wave systemgenerated by the bulbinterferes with the wavesystem of the ship.

• The length of the bulbdefines the phase ofinterference and itsvolume determines thewidth of its wave system.

Page 5: BULBOUS BOW

Usage of the Bulb

• The bulbous bow, by changing the entrance angles of the waterlines and the volume distribution, represents an effective mean of reducing the wave resistance

Page 6: BULBOUS BOW

• The usefulness of the bulb is in the interval 0.238 ≤ Fn ≤ 0.563

• Generally at low speeds the effect of the bulb is negative. When theFroude Number (FN) increases, its effect becomes positive andincreases up to a maximum value.

Page 7: BULBOUS BOW

Types of Bulb Sections

Page 8: BULBOUS BOW
Page 9: BULBOUS BOW

Integration in the Hull

• Addition Bulbs

– The bulb shape is completely independent from the hull

shape– Typically there is a knuckle resulting from the intersection

of the bulb and the hull• Implicit Bulbs

– Sectional Area Curve is changed, part of the volume of

the bulb is distributed aft of the FP– No knuckles required

Page 10: BULBOUS BOW

Addition bulb of with a knuckle in the intersection with the hull.

Page 11: BULBOUS BOW

Implicit Bulbs

Page 12: BULBOUS BOW

Aspects of the Initial Bulb Design

• The bulb shall never emerge completely. The point at the forward extremity shall be at the level of the waterline

• Distribution of the bulb volume– Too much immersion does not produce any effect– Volume concentrated longitudinally near the free surface

increases the effect of interference in waves

Page 13: BULBOUS BOW

Advantages of the Bulbous Bow

– Reduces the bow wave, due to the wave generated by the bulb itself, making the ship more efficient in terms of

energy– Works as a robust “bumper" in the event of a collision

– Allows the installation of the bow thrusters at a foremostposition, making it more efficient

– Allows a larger reserve of flotation or a larger ballast capacity

Forward

– Reduces the pitch movement

Page 14: BULBOUS BOW

– The bulb is advantageous in ice navigation – the ice blocksslide along the bulb with their “wet” side, which has a lowerfriction coefficient

Page 15: BULBOUS BOW

Bulbous bow with bow thruster

Page 16: BULBOUS BOW

Bulb for Navigation in Ice

Bulb for Navigation in Ice

Presents a low resistance in ice and simultaneously a lowresistance in open waters

Page 17: BULBOUS BOW
Page 18: BULBOUS BOW

Aircraft Carrier George Washington