Upload
rene-becerra-matias
View
142
Download
0
Embed Size (px)
Citation preview
Códigos ASME para la industria Oil & Gas
René Becerra Matías
Códigos ASME para la industria Oil & Gas
Conocer las similitudes y diferencias entre las versiones del código ASME para cañerías a presión.
2
Códigos ASME para la industria Oil & Gas
ESTA PRESENTACION DEBE CONSIDERARSE COMO UNA REFERENCIA QUE NO SUSTITUYE A LAS VERSIONES ORIGINALES Y VIGENTES DE LAS NORMAS INDICADAS. SU PROPÓSITO ES EXPONER ALGUNOS DE LOS ASPECTOS QUE SE CONSIDERAN RELEVANTES PERO NO CONTIENE NECESARIAMENTE TODA LA INFORMACIÓN PARA ATENDER NECESIDADES ESPECÍFICAS.
3
• Diferenciar fecha de publicación de fecha efectiva. • Respuestas a interpretaciones. • Erratas efectivas desde su publicación.
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Intro
4
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Intro
5
• Códigos ANSI. • Límites de ASME con la industria. • Responsabilidad sólo por las interpretaciones.
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Intro
6
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Intro
7
• Each of the codes refers to a piping system. • While the specific definition of a piping system may vary from codebook
to codebook, this simplified definition treats a piping system according to the following:
A piping system is a set of components including pipe, pipe fittings, flanges, bolting, gaskets, relief devices, and the pressure-retaining parts included in any stress analysis. It also includes the hangers, supports, and other equipment necessary to prevent overstressing of the pressure retaining parts. It does not include the structure and equipment and foundations, except as they may affect the stress analysis. • This definition comes mainly from the B31.7 1969 edition. It captures
the gist of the many separate definitions each book might offer as well as the reason for the codes. That reason is to define the design and fabrication of a system that offers a reasonable expectation of being safe when operated as intended.
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Sistemas de Cañerías
8
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Sistemas de Cañerías
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
9
PROCESS PIPING
• Chapter I Scope and Definitions
• Chapter II Design • Chapter III Materials • Chapter IV Standards for
Piping Components • Chapter V Fabrication,
Assembly and Erection • Chapter VI Inspection,
Examination and Testing • Chapter VII Non Metallic
Piping and Piping Lined With Non Metals
A300 General Statements • Chapter VIII Piping for
Catergory M Fluid Service M300 General Statements • Chapter IX High Pressure
Piping K300 General Statements • Chapter X High Purity
Piping U300 General Statements
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Contenido
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES • Chapter I Scope and
Definitions • Chapter II Design • Chapter III Materials • Chapter IV Dimensional
Requirements • Chapter V Construction,
Welding, and Assembly • Chapter VI Inspection
and Testing • Chapter VII Operation
and Maintenance Procedures
• Chapter VIII Corrosion Control
• Chapter IX Offshore Liquid Pipeline Systems
A400 General Statements • Chapter X Carbon Dioxide
Pipeline Systems B400 General Statements • Chapter XI Slurry Pipeline
Systems C400 General Statements
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
• General Provisions and
Definitions • Chapter I Materials and
Equipment • Chapter II Welding • Chapter III Piping System
Components and Fabrication Details
• Chapter IV Design, Installation, and Testing
• Chapter V Operating and Maintenance Procedures
• Chapter VI Corrosion Control
• Chapter VII Intentionally Left Blank
• Chapter VIII Offshore Gas Transmission
A800 Offshore Gas Transmission • Chapter IX Sour Gas
Service B800 Sour Gas Service
10
PROCESS PIPING
• Appendices • A Allowable Stresses and Quality
Factors for Metallic Piping and Bolting Materials
• B Stress Tables and Allowable Pressure Tables for Nonmetals
• C Physical Properties of Piping Materials
• D Flexibility and Stress Intensification Factors
• E Reference Standards • F Precautionary Considerations • G Safeguarding • H Sample Calculations for Branch
Reinforcement • J Nomenclature • K Allowable Stresses for High Pressure
Piping • L Aluminum Alloy Pipe Flanges • M Guide to Classifying Fluid Services • N Application of ASME B31.3
Internationally • P Alternative Rules for Evaluating
Stress Range • Q Quality System Program • S Piping System Stress Analysis
Examples • V Allowable Variations in Elevated
Temperature Service • X Metallic Bellows Expansion Joints • Z Preparation of Technical Inquiries
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing 10.- Integrity
Contenido
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES • Mandatory Appendix • I Referenced Standards Nonmandatory
Appendices • A Submittal of Technical Inquiries to
the B31 Pressure Piping Committee • B Publications That Do Not Appear in
the Code or Mandatory
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
• Appendices • Mandatory Appendix A References • Mandatory Appendix B Numbers and
Subjects of Standards and Specifications That Appear in Mandatory Appendix A
• Nonmandatory Appendix C Publications That Do Not Appear in the Code or Mandatory Appendix A
• Mandatory Appendix D Specified Minimum Yield Strength for Steel Pipe Commonly Used in Piping Systems
• Mandatory Appendix E Flexibility and Stress Intensification Factors
• Mandatory Appendix F Extruded Headers and Welded Branch Connections
• Mandatory Appendix G Testing of Welders Limited to Work on Lines Operating at Hoop Stresses of Less Than 20% of the Specified Minimum Yield Strength
• Mandatory Appendix H Flattening Test for Pipe
• Mandatory Appendix I End Preparations for Buttwelding
• Nonmandatory Appendix J Commonly Used Conversion Factors
• Mandatory Appendix K Criteria for Cathodic Protection
• Nonmandatory Appendix L Determination of Remaining Strength of Corroded Pipe
• Nonmandatory Appendix M Gas Leakage Control Criteria
• Nonmandatory Appendix N Recommended Practice for Hydrostatic Testing of Pipelines in Place Nonmandatory Appendix O Preparation of Technical Inquiries
• Nonmandatory Appendix P Nomenclature for Figures
• Mandatory Appendix Q Scope Diagrams Nonmandatory Appendix R Estimating Strain in Dents
11
PROCESS PIPING
• Chapter I Scope and Definitions
• Chapter II Design • Chapter III Materials • Chapter IV Standards for
Piping Components • Chapter V Fabrication,
Assembly and Erection • Chapter VI Inspection,
Examination and Testing • Chapter VII Non Metallic
Piping and Piping Lined With Non Metals
A300 General Statements • Chapter VIII Piping for
Catergory M Fluid Service M300 General Statements • Chapter IX High Pressure
Piping K300 General Statements • Chapter X High Purity
Piping U300 General Statements
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Contenido
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES • Chapter I Scope and
Definitions • Chapter II Design • Chapter III Materials • Chapter IV Dimensional
Requirements • Chapter V Construction,
Welding, and Assembly • Chapter VI Inspection
and Testing • Chapter VII Operation
and Maintenance Procedures
• Chapter VIII Corrosion Control
• Chapter IX Offshore Liquid Pipeline Systems
A400 General Statements • Chapter X Carbon Dioxide
Pipeline Systems B400 General Statements • Chapter XI Slurry Pipeline
Systems C400 General Statements
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
• General Provisions and
Definitions • Chapter I Materials and
Equipment • Chapter II Welding • Chapter III Piping System
Components and Fabrication Details
• Chapter IV Design, Installation, and Testing
• Chapter V Operating and Maintenance Procedures
• Chapter VI Corrosion Control
• Chapter VII Intentionally Left Blank
• Chapter VIII Offshore Gas Transmission
A800 Offshore Gas Transmission • Chapter IX Sour Gas
Service B800 Sour Gas Service
12
PROCESS PIPING
• Chapter I Scope and Definitions
• Chapter II Design • Chapter III Materials • Chapter IV Standards for
Piping Components • Chapter V Fabrication,
Assembly and Erection • Chapter VI Inspection,
Examination and Testing • Chapter VII Non Metallic
Piping and Piping Lined With Non Metals
A300 General Statements • Chapter VIII Piping for
Catergory M Fluid Service M300 General Statements • Chapter IX High Pressure
Piping K300 General Statements • Chapter X High Purity
Piping U300 General Statements
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Contenido
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES • Chapter I Scope and
Definitions • Chapter II Design • Chapter III Materials • Chapter IV Dimensional
Requirements • Chapter V Construction,
Welding, and Assembly • Chapter VI Inspection
and Testing • Chapter VII Operation
and Maintenance Procedures
• Chapter VIII Corrosion Control
• Chapter IX Offshore Liquid Pipeline Systems
A400 General Statements • Chapter X Carbon Dioxide
Pipeline Systems B400 General Statements • Chapter XI Slurry Pipeline
Systems C400 General Statements
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
• General Provisions and
Definitions • Chapter I Materials and
Equipment • Chapter II Welding • Chapter III Piping System
Components and Fabrication Details
• Chapter IV Design, Installation, and Testing
• Chapter V Operating and Maintenance Procedures
• Chapter VI Corrosion Control
• Chapter VII Intentionally Left Blank
• Chapter VIII Offshore Gas Transmission
A800 Offshore Gas Transmission • Chapter IX Sour Gas
Service B800 Sour Gas Service
13
PROCESS PIPING
• Chapter I Scope and Definitions
• Chapter II Design • Chapter III Materials • Chapter IV Standards for
Piping Components • Chapter V Fabrication,
Assembly and Erection • Chapter VI Inspection,
Examination and Testing • Chapter VII Non Metallic
Piping and Piping Lined With Non Metals
A300 General Statements • Chapter VIII Piping for
Catergory M Fluid Service M300 General Statements • Chapter IX High Pressure
Piping K300 General Statements • Chapter X High Purity
Piping U300 General Statements
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Contenido
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES • Chapter I Scope and
Definitions • Chapter II Design • Chapter III Materials • Chapter IV Dimensional
Requirements • Chapter V Construction,
Welding, and Assembly • Chapter VI Inspection
and Testing • Chapter VII Operation
and Maintenance Procedures
• Chapter VIII Corrosion Control
• Chapter IX Offshore Liquid Pipeline Systems
A400 General Statements • Chapter X Carbon Dioxide
Pipeline Systems B400 General Statements • Chapter XI Slurry Pipeline
Systems C400 General Statements
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
• General Provisions and
Definitions • Chapter I Materials and
Equipment • Chapter II Welding • Chapter III Piping System
Components and Fabrication Details
• Chapter IV Design, Installation, and Testing
• Chapter V Operating and Maintenance Procedures
• Chapter VI Corrosion Control
• Chapter VII Intentionally Left Blank
• Chapter VIII Offshore Gas Transmission
A800 Offshore Gas Transmission • Chapter IX Sour Gas
Service B800 Sour Gas Service
14
PROCESS PIPING
• Chapter I Scope and Definitions
• Chapter II Design • Chapter III Materials • Chapter IV Standards for
Piping Components • Chapter V Fabrication,
Assembly and Erection • Chapter VI Inspection,
Examination and Testing • Chapter VII Non Metallic
Piping and Piping Lined With Non Metals
A300 General Statements • Chapter VIII Piping for
Catergory M Fluid Service M300 General Statements • Chapter IX High Pressure
Piping K300 General Statements • Chapter X High Purity
Piping U300 General Statements
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Contenido
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES • Chapter I Scope and
Definitions • Chapter II Design • Chapter III Materials • Chapter IV Dimensional
Requirements • Chapter V Construction,
Welding, and Assembly • Chapter VI Inspection
and Testing • Chapter VII Operation
and Maintenance Procedures
• Chapter VIII Corrosion Control
• Chapter IX Offshore Liquid Pipeline Systems
A400 General Statements • Chapter X Carbon Dioxide
Pipeline Systems B400 General Statements • Chapter XI Slurry Pipeline
Systems C400 General Statements
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
• General Provisions and
Definitions • Chapter I Materials and
Equipment • Chapter II Welding • Chapter III Piping System
Components and Fabrication Details
• Chapter IV Design, Installation, and Testing
• Chapter V Operating and Maintenance Procedures
• Chapter VI Corrosion Control
• Chapter VII Intentionally Left Blank
• Chapter VIII Offshore Gas Transmission
A800 Offshore Gas Transmission • Chapter IX Sour Gas
Service B800 Sour Gas Service
15
PROCESS PIPING
• Chapter I Scope and Definitions
• Chapter II Design • Chapter III Materials • Chapter IV Standards for
Piping Components • Chapter V Fabrication,
Assembly and Erection • Chapter VI Inspection,
Examination and Testing • Chapter VII Non Metallic
Piping and Piping Lined With Non Metals
A300 General Statements • Chapter VIII Piping for
Catergory M Fluid Service M300 General Statements • Chapter IX High Pressure
Piping K300 General Statements • Chapter X High Purity
Piping U300 General Statements
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Contenido
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES • Chapter I Scope and
Definitions • Chapter II Design • Chapter III Materials • Chapter IV Dimensional
Requirements • Chapter V Construction,
Welding, and Assembly • Chapter VI Inspection
and Testing • Chapter VII Operation
and Maintenance Procedures
• Chapter VIII Corrosion Control
• Chapter IX Offshore Liquid Pipeline Systems
A400 General Statements • Chapter X Carbon Dioxide
Pipeline Systems B400 General Statements • Chapter XI Slurry Pipeline
Systems C400 General Statements
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
• General Provisions and
Definitions • Chapter I Materials and
Equipment • Chapter II Welding • Chapter III Piping System
Components and Fabrication Details
• Chapter IV Design, Installation, and Testing
• Chapter V Operating and Maintenance Procedures
• Chapter VI Corrosion Control
• Chapter VII Intentionally Left Blank
• Chapter VIII Offshore Gas Transmission
A800 Offshore Gas Transmission • Chapter IX Sour Gas
Service B800 Sour Gas Service
16
PROCESS PIPING
• Chapter I Scope and Definitions
• Chapter II Design • Chapter III Materials • Chapter IV Standards for
Piping Components • Chapter V Fabrication,
Assembly and Erection • Chapter VI Inspection,
Examination and Testing • Chapter VII Non Metallic
Piping and Piping Lined With Non Metals
A300 General Statements • Chapter VIII Piping for
Catergory M Fluid Service M300 General Statements • Chapter IX High Pressure
Piping K300 General Statements • Chapter X High Purity
Piping U300 General Statements
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Contenido
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES • Chapter I Scope and
Definitions • Chapter II Design • Chapter III Materials • Chapter IV Dimensional
Requirements • Chapter V Construction,
Welding, and Assembly • Chapter VI Inspection
and Testing • Chapter VII Operation
and Maintenance Procedures
• Chapter VIII Corrosion Control
• Chapter IX Offshore Liquid Pipeline Systems
A400 General Statements • Chapter X Carbon Dioxide
Pipeline Systems B400 General Statements • Chapter XI Slurry Pipeline
Systems C400 General Statements
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
• General Provisions and
Definitions • Chapter I Materials and
Equipment • Chapter II Welding • Chapter III Piping System
Components and Fabrication Details
• Chapter IV Design, Installation, and Testing
• Chapter V Operating and Maintenance Procedures
• Chapter VI Corrosion Control
• Chapter VII Intentionally Left Blank
• Chapter VIII Offshore Gas Transmission
A800 Offshore Gas Transmission • Chapter IX Sour Gas
Service B800 Sour Gas Service
17
PROCESS PIPING
• Chapter I Scope and Definitions
• Chapter II Design • Chapter III Materials • Chapter IV Standards for
Piping Components • Chapter V Fabrication,
Assembly and Erection • Chapter VI Inspection,
Examination and Testing • Chapter VII Non Metallic
Piping and Piping Lined With Non Metals
A300 General Statements • Chapter VIII Piping for
Catergory M Fluid Service M300 General Statements • Chapter IX High Pressure
Piping K300 General Statements • Chapter X High Purity
Piping U300 General Statements
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Contenido
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES • Chapter I Scope and
Definitions • Chapter II Design • Chapter III Materials • Chapter IV Dimensional
Requirements • Chapter V Construction,
Welding, and Assembly • Chapter VI Inspection
and Testing • Chapter VII Operation
and Maintenance Procedures
• Chapter VIII Corrosion Control
• Chapter IX Offshore Liquid Pipeline Systems
A400 General Statements • Chapter X Carbon Dioxide
Pipeline Systems B400 General Statements • Chapter XI Slurry Pipeline
Systems C400 General Statements
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
• General Provisions and
Definitions • Chapter I Materials and
Equipment • Chapter II Welding • Chapter III Piping System
Components and Fabrication Details
• Chapter IV Design, Installation, and Testing
• Chapter V Operating and Maintenance Procedures
• Chapter VI Corrosion Control
• Chapter VII Intentionally Left Blank
• Chapter VIII Offshore Gas Transmission
A800 Offshore Gas Transmission • Chapter IX Sour Gas
Service B800 Sour Gas Service
18
PROCESS PIPING
• Chapter I Scope and Definitions
• Chapter II Design • Chapter III Materials • Chapter IV Standards for
Piping Components • Chapter V Fabrication,
Assembly and Erection • Chapter VI Inspection,
Examination and Testing • Chapter VII Non Metallic
Piping and Piping Lined With Non Metals
A300 General Statements • Chapter VIII Piping for
Catergory M Fluid Service M300 General Statements • Chapter IX High Pressure
Piping K300 General Statements • Chapter X High Purity
Piping U300 General Statements
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Contenido
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES • Chapter I Scope and
Definitions • Chapter II Design • Chapter III Materials • Chapter IV Dimensional
Requirements • Chapter V Construction,
Welding, and Assembly • Chapter VI Inspection
and Testing • Chapter VII Operation
and Maintenance Procedures
• Chapter VIII Corrosion Control
• Chapter IX Offshore Liquid Pipeline Systems
A400 General Statements • Chapter X Carbon Dioxide
Pipeline Systems B400 General Statements • Chapter XI Slurry Pipeline
Systems C400 General Statements
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
• General Provisions and
Definitions • Chapter I Materials and
Equipment • Chapter II Welding • Chapter III Piping System
Components and Fabrication Details
• Chapter IV Design, Installation, and Testing
• Chapter V Operating and Maintenance Procedures
• Chapter VI Corrosion Control
• Chapter VII Intentionally Left Blank
• Chapter VIII Offshore Gas Transmission
A800 Offshore Gas Transmission • Chapter IX Sour Gas
Service B800 Sour Gas Service
19
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Definitions
20
PROCESS PIPING
• Chapter I Scope and Definitions
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Definitions
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES • Chapter I Scope and
Definitions
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
• General Provisions and
Definitions
21
PROCESS PIPING 1.- Introducción
2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Definitions
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
22
PROCESS PIPING 1.- Introducción
2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Definitions
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
23
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Definitions
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
PROCESS PIPING
24
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Definitions
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
PROCESS PIPING
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
25
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Definitions
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
PROCESS PIPING
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
26
27
PROCESS PIPING
• Conditions and Criteria 1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Design
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES • Loads
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
• Design, Installation, and
Testing
28
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Design
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
29
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Design
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
30
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Design
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
31
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Design
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
32
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Design
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
33
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Design
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
34
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Design
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
35
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Design
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
36
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Design
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
37
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Design
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
38
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Design
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
39
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Design
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
40
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Design
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
41
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Design
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
42
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Design
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
43
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Design
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
44
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing .
Design
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
45
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Design
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
46
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Design
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
47
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Design
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
48
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Design
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
49
50
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Materials
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
51
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Materials
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
52
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Materials
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
53
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Materials
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
54
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Materials
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
55
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Components
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
56
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Components
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
57
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Components
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
58
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Fabrication
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
59
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Fabrication
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
60
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Fabrication
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
61
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Fabrication
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
62
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Fabrication
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
63
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Testing
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
64
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Testing
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
65
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Testing
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
66
PROCESS PIPING
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Testing
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS
67
1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing
Bibliografía.
68