Catalog bộ lọc sóng hài Circutor - Beeteco.com

AFQevo Active Multi-Function Filter

AFQevoActive Multi-Function Filter

Technology for energy efficiency

Tư vấn chọn sản phẩm

Giao hàng tận nơi

Hỗ trợ kỹ thuật

Chính sách hậu mãi đa dạng

DỊCH VỤ CHĂM SÓC KHÁCH HÀNG TOÀN DIỆN

Nhà cung cấp thiết bị điện chuyên nghiệpEmail: [email protected]: 0909 41 61 43

CÔNG TY TNHH THƯƠNG MẠI KỸ THUẬT ASTERSố 7/31 KDC Thương Mại Sóng Thần, Kp. Nhị Đồng 1, P. Dĩ An, Tx. Dĩ An, Bình Dương

Tel: (0650) 3617 012Fax: (0650) 3617 011


More than just a simple problemIn recent years, substantial growth in the number of electronic devices designed to equip our installations has resulted in significant changes in the types of loads connected to the power distribution system.

These devices are currently equipped with electronics that in one way or another increase task efficiency, production processes and the activities

All in all, these devices and units have definitely improved our quality of life; however, they also lead to greater contamination of our electric system and thus to high levels of harmonics.

we perform. Everyone uses computers for personal use or for processing and controlling production systems with variable speed drivers, air-conditioning units, lifts that slow down when approaching their destination floor, etc. These devices are equipped with rectifiers, modulators, etc., which distort the wave shape of the current to achieve their correct operation.

HARMONICS

2

AFQevo

PowerStudiocompatible


A solution

MULTI-FUNCTION

INTUITIVE

EFFICIENT3 Functions in 1

1. Harmonic filteringReduction of harmonic currents up to the 50th harmonic (2500 Hz). Optional selection of the harmonic frequencies to be filtered in order to achieve higher efficiency.

Power factor correction. Both inductive and capacitive currents.

Current balancing correction, improving the phase-to-phase consumption of an installation. The 4-wire model reduces the neutral current.

2. Power factor correction 3. Phase balancing

The AFQevo active filters are multi-function 3-in-1 units, with cutting edge technology to perform 3 different functions with a single unit.

In addition, these functions can be prioritised in the required order.

HARMONICS

With AFQevoWithout AFQevo

Auto-diagnosis Remote verification

Datalogger Electric energy management via communication systems

3


Auto-diagnosisAFQevo features an internal auto-diagnosis system that is activated during start-up, which shows the user whether the unit is operating correctly or there is a connection problem. The messages are shown automatically on its TFT touch-screen display, guaran-teeing that they are viewed immediately. This guar-antees the correct operation of the filter and prevents damage caused by an incorrect installation.

Auto-diagnosis of the unit every time it is started, guaranteeing correct operation.

ExpandableAFQevo enables parallel installation of up to 100 filters*. This option greatly increases installation flexibility in the event of future filtering needs due to load expansion or as a result of changes in consumption habits.

The capacity to operate in parallel allows the system to use redundancy strategies and achieve top performance of the units. Therefore, the units operate within their highest range of efficiency, resulting in the uniform wear of all of their components.

* 50 filters for type AFQevo 200

Easier to installAFQevo has a new wall-mounted and cabinet designs, so it can be easily and quickly installed, thanks to its reduced weight and compact dimensions.

In addition, it enables installation of transformers on the network and load sides.

CONNECT SET UP START

Start-up the unit in only 3 steps:

Connect, set up and start.

Wall-mounted installation

100 filtersExpandable, up to

4

2GB


DataloggerAFQevo features a 2 Gb internal memory to record the load curve of the following parameters during each phase: voltage, mains and load current, active power in the mains and load, reactive power in the mains and load, THDi (total), internal temperature and % use of the filter.

Smart thermal management systemAFQevo can adjust the turning speed of its fans, according to the needs of each moment, with the purpose of minimising the noise generated by the unit and maximising their working life. This guarantees the highest efficiency throughout the working temperature range, detection of ventilation system deterioration and the implementation of preventive maintenance actions.

Installation safetyAFQevo features a firmware security system, in compliance with the IEC 60730 Standard, which performs the auto-diagnosis of the code and of the hardware running it. This guarantees that the system will work in the safe mode in the case that a fault is detected. Secure firmware

Safe mode

5


Remote verificationAFQevo can be remotely accessed via Ethernet connection to perform on-line diagnosis tasks or to update the system, without the need for on-site technical support.

Built-in web serverAFQevo features an Ethernet port to access its web site from any browser, with the purpose of monitoring instantaneous parameters, downloading data and events stored on-line, with no need to download a software application.

With optional remote verification

and assistance

Electric energy management via communication systemsAFQevo features an RS-485 port and an Ethernet port, so the unit can be connected with the Modbus RTU protocol to our “PowerStudio Scada” energy management software to monitor the instantaneous values, create graphics and tables, generate reports and detect alarms.

PowerStudiocompatible

6

internet


Touch-screen displayTouch-screen HMI display, for quickmanagement and configuration of the unit.It can also display the "in situ" filter data.

The AFQevo active filters can work in 12 different modes, with a series of simple combinations, prioritising their 3 main functions: Harmonics filtering, Power factor correction and Phase balancing.

Multi-purposeThe AFQevo active filters are very versatile, since they can be configured with different configurations and operating modes. Therefore, they can be used in any type of installation and for any type of situation: › Available for 3 or 4-wire installations. › Suitable for the following voltages: 230, 400 and 480 V.

› These filters can be adapted to the complexities of each installation, since they are connected to the network or load side.

› They feature a priority system, which can be adjusted for power factor correction, phase balancing or harmonics filtering.

ConnectivityCheck the data of your active filters in real time, process the data via the screens and generate reports with a remote connection using PowerStudio SCADA.

OPERATINGmodes

7


ApplicationsAFQevo filters are the best solution in installations where wave shape quality and electrical service continuity are of utmost importance. They are also one of the best solutions when compliance with the harmonic emission regulations is required. Examples of installations where AFQ filters are installed:

HospitalsAirports and infrastructures

AFQevo filters are very easy to install, achieving top performance from start-up.

AFQevo provides you with everything you need to keep your installation free of harmonics.

8


Standard installation Depending on filtering needs, active filtering units should be installed on the main line (Level 1) to lighten the burden of the power transformers (Level 2), such as in an electric vehicle

charging station or an industrial unit with various sources of harmonics; they can also be installed close to the loads (Level 3), such as in the case of a Data Processing Centre (DPC).

Standard application with AFQevo Active Multi-Function Filters on header and close to the load.

Audiovisual centres

Department stores and shopping malls

Data processing centres (DPC)

Pulp and paper industries

Automotive plants

Hotels

AFQevo

EDS

CVM-B100

CVM-C10

CVM-MINI

UPS

Data Processing Centre

Level 1

Level 2

Level 3

RVEElectric vehicle ChargingPanel

Air conditioning

Lighting

AFQevo

AFQevo

9

AFQevo30


AFQevo (WS)

AFQevo with EMI filter (WF)

Parallel multifunction active filter

Description

The AFQevo parallel multifunction active filter is the most complete solution for solving

power quality problems related to industrial, commercial or service installations with

presence of harmonics, consumption of reactive power (usually capacitive) and also phase

unbalance. The AFQevo is meant for wall-mounting thanks to its small size to facilitate its

installation.

The features and functions implemented are:

— Filtering capacity of 30 A

— Reduced metallic enclosure for wall assembly. Its compact dimensions make

it easy to install.

— Range of filters for installations with 3 wires (3W model) or 4 wires (4W model)

— Multi-range voltage and dual frequency (50/60 Hz).

— Reduction of harmonic currents up to the 50th harmonic (2,500 Hz).

— Selection of harmonic frequencies to be filtered so to reach the filter’s highest

effectiveness.

— Power factor correction. Both inductive and capacitive currents.

— Phase current balancing. In the 4W model, it helps to reduce consumption in neutral.

If higher filtering capabilities are required, the system can be expanded with up to 100

AFQevo connected in parallel (the filters must all be of the same 3 or 4-wire model).

Application

Ideal solution for installations with large amounts of single-phase and three-phase loads

that generate harmonics, such as computers, UPSs, lights, lifting units, air-conditioning

systems with phase shifters, etc.

Technical features

Electrical

features

Rated voltage 4 wires (4W) 3P+N: 230…400V phase-phase

+/-10%

3 wires (3W) 3P:400 -440-480V phase-

phase +/- 10%Frequency 50/60Hz +/- 5%THDV max. 25%

Power Maximum power consumption 1050 WMaximum power 20700 VAMaximum current (phase) 30 A (r ms)Maximum current (neutral)

for 4W

90 A (rms)

Crest factor 2:01Current

measurement

Type 4W: 3P+N: 3x transformer …/5A

3W: 3P: 3 ó 2x transformer …/5A

≥ Class 1 or (0,5 – 0,2- 0,2S)

Frequency up to 2500HzConsumption 1.5 VA each transformer

Features Current harmonic range From the 2nd to the 50th harmonic,

selectable

Transient response < 1 msPhase compensation SelectablePower factor correction

function

Selectable from 0,8 inductive to 0,8

capacitiveProgrammation priority Selection of harmonics to be filtered,

enabling

the balancing function and/or the power

factor

correction function

10

AFQevo30


Features Parallel installation Up to 100 devices

Connecting CTs to the “master” unit

Advanced management algorithm:

xMaximize the life of the device (alternating operation of

different devices).

xMaximizing operating efficiency (only the necessary

filters are enabled).

xAllow redundancy (system operation in case of failure

of equipment).User interface TCT touch colour screen 3,5”

Web server + datalogger (2Gb)

RS485 Modbus RTU, 4800, 9600, 19200 Stop: 0,1,2Paridad No, Even, Odd

Ethernet TCP/IP (Modbus TCP)

Installation Category CAT III (300 V)

Pollution degree 2

Working temperature -10...45ºC

Storage temperature -20...95 ºC

Relative humidity 0...90% non-condensing

Altitude 2000 m

Protection degreee IP20

References

Phase current

Neutral current Crest current EMI Filter Type Code

30 A - 60 A � AFQe-3WS-030M-480 R7LM7B

30 A - 60 A � AFQe-3WF-030M-480 R7LM7330 A 90 A 60 A � AFQe-4WS-030M-400 R7QM0B

30 A 90 A 60 A � AFQe-4WF-030M-400 R7QM03

Active filters for 3 wires (3W) and 4 wires (4W)

Connection Mains M6 Ring terminal. Maximum ring width 12 mm Coupling torque 2.2-2.4 Nm

CTs 6-pole connector. Maximum conductor cross-section 2.5mm2 Coupling torque 0.5-0.6 Nm

RS-485 3-pole connector. Maximum conductor cross-section 1.5mm2 Coupling torque 0.22-0.25 Nm

Ethernet RJ45

Dimensions Weight 30 kg

Noise level < 70 dBA

Standards EN 62477-1:2012, EN 55011:2011, EN 61000-6-2:2006, EN 61000-6-4:2007


11

AFQevo30

L1

L2

L3

S1 S2 S1 S2 S1 S2L1

P1 P2L2 L3

P1 P2P1 P2

N

S1 S2

P1 P2 S1 S2

P1 P2 S1 S2

P1 P2

CARGA / LOAD

L1 L2 L3 N N

RED/ MAIN

MCB 40A

L1

L2

L3

S1 S2 S1 S2 S1 S2L1

P1 P2L2 L3

P1 P2P1 P2

N

S1 S2

P1 P2 S1 S2

P1 P2 S1 S2

P1 P2

CARGA / LOAD

L1 L2 L3 N N

RED/ MAIN

MCB 40A

9

n 9

435

710

257

300

570

250

600

257

300

n9

9

250435

600

570


Connections 4 wires three phase

connection with network

side current measurement

4 wires three phase

connection with load side

current measurement

Dimensions


TypeDimensions (Width x High x Depth) Weight (kg)

AFQe-3WS-030M-480 435 x 600 x 257 mm 31

AFQe-3WF-030M-480 435 x 710 x 257 mm 32

AFQe-4WS-030M-400 435 x 600 x 257 mm 31

AFQe-4WF-030M-400 435 x 710 x 257 mm 32

12

AFQevo

AFQevo 100

AFQevo 200

100 / 200


Active Parallel Multi-Function Filter

Description

The AFQevo cabinet series parallel multifunction active filter is the most complete solution for solving Quality problems related to industrial, commercial or services installations with presence of harmonics, consumption of reactive power (usually capacitive) and also phase unbalance. This AFQevo is meant rack mounting into market standard cabinets, designed to facilitate its installation. The implemented features and functions are:

— Filtering capacity from 100 to 200 A for each cabinet.— Reduced rack dimensions to be installed easily in standard cabinets.— Range of filters for installations with 3 wires (3W model) or 4 wires (4W model).— Multirange, dual frequency (50/60 Hz)— Reduction of harmonic currents up to the 50th harmonic (2500 Hz). — Selection of harmonic frequencies to be filtered so to reach the filter’s highest effectiveness.— Power factor correction. Both inductive and capacitive currents.— Phase current balancing. In the 4W model, it also helps to reduce consumption in neutral.

If higher capacities are required, the system can be expanded with AFQevo racks in parallel (all the filters/racks must be the same model, 3 o 4 wires).

ApplicationIdeal solution for installations with large amounts of single-phase and three-phase loads that generate harmonics, such as computers, UPSs, lights’ units, air-conditioning systems with phase shifters, etc.

Also for installations that requires high power Quality to increase the production efficiency or reduce supply continuity of the system.

Technical features

Electrical

features

Rated voltage 4-wire (4W) 3P+N: 230…400V phase-phase ±10%

3-wire (3W) 3P: 400 -440-480V phase-phase ±10%Frequency 50/60Hz ± 5%Maximum THDv 25%

Power Maximum power consumption 3500 WMaximum current (phase) Depending model, 100-200 ArmsMaximum current (neutral) 4W Depending model, 300-600 Arms

Current

measurement

Type 4W: 3P+N: 3x current transformer …/5A

3W: 3P: 3 or 2x current transformer …/5A

Class 1 or better (0.5 – 0.2- 0.2S)

Frequency response, up to 2500HzConsumption 1.5 VA each current transformer

Features Current harmonics range From the 2nd to the 50th harmonic, selectable

transient response <1 msPhase compensation SelectablePower factor correction

function

Selectable from 0.5 inductive to 0.5 capacitive

Programmation priority Selection of harmonics to be filtered, enabling

the balancing function amps/or the power factor

correction function.

13

AFQevo100 / 200


Dimensions Depending model. See table

Weight Depending model. See table

Connection Mains M10 Ring terminalMaximum ring width 12 mm.Coupling Torque 0.5-0.6 Nm

CT's 6-pole connectorMaximum conductor cross section 2.5 mm2

Coupling Torque 0.5-0.6 NmRS485 3-pole connector

Maximum conductor cross section 1.5 mm2

Coupling Torque 0.22-0.25 NmEthernet RJ45

Standards IEC 62477-1:2012, IEC 55011:2011, IEC 61000-6-2, IEC 61000-6-4:2007


Features Parallel installation x Up to 100 devices / racks (AFQe 100A)

x Up to 50 devices / racks (AFQe 200A)

x Connecting CT's to the master unit.

Advanced processing algorithm:

x Maximize the life of the device (alternating operation of

different devices).

x Maximizing operating efficiency (only the necessary filters are

enabled).

x Allow redundancy (system operation in case of failure of

equipment).

Noise level ≤ 65 dBA

Crest factor 2

User interface TCT touch colour screen 3.5"

Web server and datalogger (2 Gb)RS-485 Modbus RTU, 4800, 9600, 19200 Stop 0,1,2

Parity No, Even, OddEthernet TCP/IP (Modbus TCP)

Installation Installation category CAT III (300 V)

Pollution degree 2

Working temperature -10...45ºC

Storage temperature -20...55ºC

Relative humidity 0...95% non-condensation

Altitude 2,000 m

Protection Degree IP21 (other protection degrees under demand)

References

Phase currentNeutral current Crest current

EMI Filter Type Code

100 A - 200 A � AFQe-3WF-100C-480 R7LF75

200 A - 400 A � AFQe-3WF-200C-480 R7LF77

100 A 300 A 200 A � AFQe-4WF-100C-400 R7QF05

200 A 600 A 400 A � AFQe-4WF-200C-400 R7QF05

Active filters for 3 wires (3W) and 4 wires (4W)

14

1835

.5

600 822

1835

.5

600822

L1

L2

L3

N

RED CARGASTransformadores decorrienteIR

IF

ICL1

L2

L3

N

Transformadores decorrienteIR

IF

ICRED CARGAS


Connections

Dimensions


Type

Dimensions

(Width x Height x Depth) Weight (kg)

AFQe-3WF-100C-480 600 x 1835.5 x 822 mm 206

AFQe-3WF-200C-480 600 x 1835.5 x 822 mm 276

AFQe-4WF-100C-400 600 x 1835.5 x 822 mm 206

AFQe-4WF-200C-400 600 x 1835.5 x 822 mm 276

15

www.circutor.com De

sig

ne

d b

y: I

ma

ge

an

d C

om

mu

nic

ati

on

s D

ep

art

me

nt

- C

IRC

UT

OR

, SA

+ info: [email protected]

AFQevoActive Multi-Function Filter

CIRCUTOR, SA reserves the right to change any information contained in this catalogue.

CIRCUTOR, SA - Vial Sant Jordi, s/n 08232 Viladecavalls (Barcelona) Spain Tel. (+34) 93 745 29 00 - Fax: (+34) 93 745 29 14 [email protected]

Code: C2R731-03

Engineering

Catalog bộ lọc sóng hài Circutor - Beeteco.com