Embed Size (px)
Citation preview
5/8"" PRO SERIES WET CUTTING CROWN BIT
Core Hole Diameter: 5/8" Part #: PCB.625 Drill Depth: 14" Thread: 5/8" - 11 Cutting: Wet Only! Application: Concrete or Reinforced Concrete
.750 PRO SERIES WET CUTTING DIAMOND CORE BIT
Core Hole Diameter: 3/4" Part #: PCB.75 Drill Depth: 14" Thread: 5/8" - 11 Cutting: Wet Only! Application: Concrete or Reinforced Concrete
7/8" PRO SERIES WET CUTTING DIAMOND CORE BIT
Core Hole Diameter: 7/8" Part #: PCB.875 Drill Depth: 14" Thread: 5/8" - 11 Cutting: Wet Only! Application: Concrete or Reinforced Concrete
1" PRO SERIES WET CUTTING DIAMOND CORE BIT
Core Hole Diameter: 1" Drill Depth: 14" Thread: 5/8"-11
2' SBE PRO SERIES DRY CUTTING DIAMOND MASONRY CORE BIT
Core Hole Diameter: 2" Drill Depth: 9" Thread: 5/8" - 11 Application: Masonry (block, brick, tile etc.) – Do NOT use on concrete. Cutting: Dry Only!
2.5' SBE PRO SERIES DRY CUTTING DIAMOND MASONRY CORE BIT
Core Hole Diameter: 2.5" Drill Depth: 9" Thread: 5/8" - 11 Application: Masonry (block, brick, tile etc.) – Do NOT use on concrete Cutting: Dry Only!
3' SBE PRO SERIES DRY CUTTING DIAMOND MASONRY CORE BIT
Core Hole Diameter: 3" Drill Depth: 9" Thread: 5/8" - 11 Application: Masonry (block, brick, tile etc.) – Do NOT use on concrete Cutting: Dry Only!
3.5" PRO SERIES DRY CUTTING DIAMOND MASONRY CORE BIT
Core Hole Diameter: 3.5" Drill Depth: 9" Thread: 5/8" - 11 Application: Masonry (block, brick, tile etc.) – Do NOT use on concrete Cutting: Dry Only!
1.00"" PRO SERIES STONE CORE BIT WITH 5/8-11" THREADS
Core Hole Diameter: 1" Drill Depth: 2" Thread: 5/8" - 11 Cutting: Wet or Dry Application: Stone, Asphalt, Tile, Granite
1 3/8" PRO SERIES STONE CORE BIT WITH 5/8-11" THREADS
Core Hole Diameter: 1-3/8" Drill Depth: 2" Thread: 5/8" - 11 Cutting: Wet or Dry Application: Stone, Asphalt, Tile, Granite
CONTACT US
ProContractor Supply Inc3917 Old Flowery Branch Rd, Oakwood, GA 30566, USAPH. No: 1-800-604-0088
