Upload
desh-sonyok
View
138
Download
8
Embed Size (px)
DESCRIPTION
Reliability based design (RBD) refers to any design methodology that are based on a rigorous reliability analysis. RBD is the only methodology available to date that can ensure self-consistency from both physical and probabilistic requirements and is compatible with the theoretical basis underlying structural design (Kulhawy & Phoon, 2002). It is considered as fundamental theoretical basis for all Load and Resistance Design (LRFD) and is capable of mitigating numerous logical inconsistencies inherent in current geotechnical design.
Citation preview
Reliability-based design of Reliability-based design of pile foundationspile foundations
Presented byPresented byDesh Raj SonyokDesh Raj Sonyok
Sittampalam SathiskumarSittampalam Sathiskumar
Department of Civil and Geological EngineeringDepartment of Civil and Geological EngineeringNew Mexico State UniversityNew Mexico State University
12/08/200512/08/2005
Design MethodologiesDesign Methodologies Working or Allowable Stress DesignWorking or Allowable Stress Design (WSD or ASD) (WSD or ASD)
Limit States DesignLimit States Design Ultimate Limit State (Ultimate Limit State (ULSULS): ):
Factored resistance ≥ Factored load effectFactored resistance ≥ Factored load effect
Serviceability Limit State (Serviceability Limit State (SLSSLS):): Deformation ≤ Tolerable deformation to remain serviceableDeformation ≤ Tolerable deformation to remain serviceable
Load and Resistance Factor DesignLoad and Resistance Factor Design (LRFD) (LRFD)
where where RR = resistance and = resistance and QQ = mean load = mean load
FS
Q
FS
RQQ ultnall ==≤
)( QRPPf <=
Eq. (1)Eq. (1)
Eq. (2)Eq. (2)
Reliability Analysis (Reliability Analysis (Kulhawy, 2002)
any design methodology that is firmly founded on a rigorous reliability basis any design methodology that any design methodology that incorporates the principles of incorporates the principles of reliability analysis, either explicitly or reliability analysis, either explicitly or otherwise, is classified as reliability otherwise, is classified as reliability based designbased design..
Geotechnical VariablesGeotechnical Variables
Inherent variabilitiesInherent variabilitiesMeasurement uncertaintiesMeasurement uncertaintiesTransformation uncertaintiesTransformation uncertainties
Uncertainty in soil property estimates Uncertainty in soil property estimates (Kulhawy and Phoon, 2002)(Kulhawy and Phoon, 2002)
Assessment of Reliability:Assessment of Reliability: Normal Random VariableNormal Random Variable
First Order Reliability Method First Order Reliability Method (FORM).(FORM).
Evaluates the probability of failure Evaluates the probability of failure numericallynumerically
Gives good approximate solutions for Gives good approximate solutions for most cases. (Madsen et al., 1986) most cases. (Madsen et al., 1986)
adopted by many authors for calibrating adopted by many authors for calibrating reliability-based design equations reliability-based design equations
Target Probability of Failure, PTarget Probability of Failure, PTT
Prob(Q<F) should be less than or equal to pProb(Q<F) should be less than or equal to pTT
Finding pFinding pTT::
(1) Cost-benefit analysis. (1) Cost-benefit analysis. not practical --- evaluating failure costsnot practical --- evaluating failure costs
(2) Failure rates estimated from actual case (2) Failure rates estimated from actual case histories.histories. No formal system exists for the registration No formal system exists for the registration of failures. (Leonards, 1982)of failures. (Leonards, 1982) (3) A method by Ellingwood, et al. (1980).(3) A method by Ellingwood, et al. (1980).
Applicability of FORM: A case studyApplicability of FORM: A case study Foundation plan for study platforms (W.h.Tang and R.B.Gilbert, 1993)Foundation plan for study platforms (W.h.Tang and R.B.Gilbert, 1993)
Pile yield probabilities Pile yield probabilities (W.h.Tang and R.B.Gilbert, 1993)(W.h.Tang and R.B.Gilbert, 1993)
System collapse probabilities System collapse probabilities (W.h.Tang and R.B.Gilbert ,1993)(W.h.Tang and R.B.Gilbert ,1993)
LRFD MethodLRFD Method
The reliability of any given pile is described by its The reliability of any given pile is described by its probability of failure probability of failure ppf f which is defined as the which is defined as the probability that the resistance is smaller than the probability that the resistance is smaller than the load effect. load effect.
ppf f = = PP( resistance < load effect)( resistance < load effect)
Performance function for substructures:Performance function for substructures:
where Rn = calculated (nominal) resistance; ∅= resistance factor; Qi = nominal load effect; γi = load factor; and η = factor to account for effects of ductility, redundancy, and operational importance
∑≥ iin QR γηφ Eq. (3)Eq. (3)
LRFD Method (contd.)LRFD Method (contd.)Reliability index β associated with the linear performance function can be calculated using the mean value first-order, second moment method (MVFOSM)
where QD and QL = nominal values of dead and live loads, respectively; λR, λQD, and λQL = bias factors for resistance, dead load, and live load, respectively; COVR, COVQD, and COVQL = coefficients of variation for resistance, dead load, and live load, respectively; and FS = factor of safety in the traditional allowable stress design (ASD).
Eq. (4)Eq. (4)
LRFD Method (contd.)LRFD Method (contd.)
The bias factors:The bias factors:
n
mR R
R=λ
where Rm = measured value of resistance. In this study, Rm is taken to be the measured Davisson capacity, whereas Rn is taken to be the predicted capacity by any given prediction method
Eq. (5)Eq. (5)
An isolated single pileAn isolated single pile A pile groupA pile group A pile system connected by A pile system connected by
superstructuresuperstructure
Scales of Pile Foundations
Scales of Pile Foundations
Reliability of Single PilesReliability of Single Piles
Being studied extensively during the past Being studied extensively during the past two decades (Zhang et al. 2001). two decades (Zhang et al. 2001).
forms the basis for the evaluating the forms the basis for the evaluating the reliability of pile groups. (Tang et al. 1990)reliability of pile groups. (Tang et al. 1990)
results of major studiesresults of major studies (Table 1)(Table 1) The overall range of The overall range of ββss obtained by different obtained by different
researchers ranges from researchers ranges from 1.7 to 3.11.7 to 3.1
Reliability statistics of single pileReliability statistics of single pile
Reliability of Driven Pile GroupReliability of Driven Pile Group
Driven piles are Driven piles are most often used in groups and connected to superstructures.
Group effects - the pile-soil cap interaction induced by overlapping of stresses in soil and changes in the density of the soil around the piles due to pile penetration.
System effects - the interaction between groups of piles and the superstructure they support.
Group effects and system effects - may alter significantly the reliability of the foundation.
Pile Group and System EfficiencyPile Group and System Efficiency Pile group efficiency (Pile group efficiency (ξ) : :
- - the ratio of the ultimate capacity of a pile group to the sum of the capacities of individual piles, - a function of pile spacing and group size.
Pile system efficiency (Pile system efficiency (χχ) :) :- the ratio of the load required to bring all the piles in a pile system to - the ratio of the load required to bring all the piles in a pile system to their ultimate computed capacity and the load required to bring most their ultimate computed capacity and the load required to bring most heavily loaded pile to the same state (Bea, 1983). heavily loaded pile to the same state (Bea, 1983).
Pile Group ReliabilityPile Group Reliability
where where λλXX and and λλξξ = bias factors of= bias factors of χχ and and ξξ respectively respectively
COVCOV22RGRG = coefficient of variation of pile group.= coefficient of variation of pile group.
λλXX is the ratio of the true and nominal system factor is the ratio of the true and nominal system factor
λλξξ is the ratio of measured and nominal group is the ratio of measured and nominal group
efficiency factorsefficiency factors
Eq. (6)Eq. (6)
Target Reliability Index Target Reliability Index Contd…Contd…
Zhang et al. (2001): Zhang et al. (2001): ββGG = 2.0 – 4.1 = 2.0 – 4.1 (associated with (associated with
ASD if no system effect)ASD if no system effect)
ββTGTG = 3.0 – 3.5 = 3.0 – 3.5 (may sufficient (may sufficient
for driven pile groups).for driven pile groups).
Barker et al. (1991) and Withiam et al. (1997):Barker et al. (1991) and Withiam et al. (1997):
ββTSTS = 2.0 – 2.5 = 2.0 – 2.5 (for single pile)(for single pile)
Once Once ββTGTG is selected corresponding is selected corresponding ββTSTS for single for single
pile design to achieve the target reliability of the pile design to achieve the target reliability of the pile group can be calculated. pile group can be calculated.
Based on the above literature review, it Based on the above literature review, it seems reasonable to establish the target seems reasonable to establish the target reliability between reliability between 2.02.0 and and 3.0 3.0 for pile groupsfor pile groups and as high as and as high as 3.03.0 to to 3.53.5 for single piles for single piles which is similar to suggested range of which is similar to suggested range of NCHRP (2004) NCHRP (2004)
Target Reliability IndexTarget Reliability Index
Calculated Calculated ββTSTS to Achieve System to Achieve System
Reliability Index of 3.0Reliability Index of 3.0
Note: Dynamic methodNote: Dynamic method
Uncertainties in loading conditions and capacity of the piles influence the reliability of pile foundations.
Reliability-based LRFD is the only methodology that can ensure self-consistency from both physical and probabilistic requirements and is compatible with the theoretical basis underlying structural design
Based on the literature review, it seems reasonable to establish the target reliability between 2.0 and 3.0 for pile groups and as high as 3.0 to 3.5 for single piles.
ConclusionConclusion
Values of the target reliability index βTS for single piles required to achieve a specified target reliability index βTG for pile groups can be calculated for several pile capacity prediction methods.
Both group effects and system effects can result in added reliability of a pile system over that of single piles.
There is a need of further research in the reliability based design for the full range of geotechnical design in order to achieve a rational and practical design solution .
Conclusion Conclusion contd…contd…
Thank you Thank you for for
your attentionyour attention
ReferencesReferencesBea, R. G. (1983). ‘‘Characterization of the reliability of offshore piles subjected to Bea, R. G. (1983). ‘‘Characterization of the reliability of offshore piles subjected to axial axial
loadings.’’ loadings.’’ Proc., ASCE Structural. CongressProc., ASCE Structural. Congress, New York., New York.Kulhawy, F.H. & Phoon, K.K. (2002). “Observation on geotechnical Kulhawy, F.H. & Phoon, K.K. (2002). “Observation on geotechnical reliability-based reliability-based
design development in North America.” design development in North America.” Foundation Foundation Design Codes Design Codes and Soil Investigation in view of and Soil Investigation in view of International International Harmonization and Harmonization and PerformancePerformance, 31-48., 31-48.
Phoon, K. K. & Kulhawy, F. H. (1999a). “Characterization of geotechnical Phoon, K. K. & Kulhawy, F. H. (1999a). “Characterization of geotechnical variability.” variability.” Canadian Geotechnical Journal,Canadian Geotechnical Journal, 36(4), 612-624. 36(4), 612-624.
Kim, K.J., Rahman, M.S., Gabr, M.A., Sarica, R.Z., & Hossain, M.S. (2005). Kim, K.J., Rahman, M.S., Gabr, M.A., Sarica, R.Z., & Hossain, M.S. (2005). “Reliability based calibration of resistance factors for axial “Reliability based calibration of resistance factors for axial capacity of dcapacity of d riven riven plies.” plies.” Geo-frontiers ConferenceGeo-frontiers Conference, Austin, Texas, , Austin, Texas, 735-746.735-746.National Cooperative Highway Research Program (NCHRP). (2004).National Cooperative Highway Research Program (NCHRP). (2004). Load Load and and
Resistance Factor Design (LRFDI for deep foundations.Resistance Factor Design (LRFDI for deep foundations. NCHRP report NCHRP report 507, Transportation research board of the National 507, Transportation research board of the National Academies, Washington, Academies, Washington, D.C.D.C.
Tang, W.H. & Gilbert, R.B. (1993). “Case study of offshore pile system Tang, W.H. & Gilbert, R.B. (1993). “Case study of offshore pile system reliability.” reliability.” Offshore Technology ConferenceOffshore Technology Conference, Huston, Texas, 677-, Huston, Texas, 677- 686686
Zhang, L. (2004). “Reliabilty verification using proof pile load test.” Zhang, L. (2004). “Reliabilty verification using proof pile load test.” Journal of Journal of Geotechnical and Geoenvironmental EngineeringGeotechnical and Geoenvironmental Engineering, ASCE, 130(11), 1203-1213., ASCE, 130(11), 1203-1213.Zhang, L., Tang, W.H., Ng Charles, W.W. (2001). “Reliabilty of axially Zhang, L., Tang, W.H., Ng Charles, W.W. (2001). “Reliabilty of axially loaded loaded driven driven
pile groups.” pile groups.” Journal of Geotechnical EngineeringJournal of Geotechnical Engineering, , ASCE, 127(12), ASCE, 127(12), 1051-1051-1060.1060.