1. The Soil Environmental Protection and Ecological Compliance
Green Material SC-01-1 SC-01-1 Inorganic Ionic Curing Agent Soil
Concrete Technical Information CROWNSWEAR ENTERPRISE
CORPORATION
2. Soil Concrete SC-01-1 Product Introduction SC-01-1 SC-01-1
SC-01-1 Inorganic Ionic Stability Liquid Curing Agent is consisting
of alkali metal aqueous solution and various elements with strong
positive ion in the form of inorganic compound liquid solidify
agent. When mix it with substance such as sludge and cement, the
negative ion of substance will create electrostatic attraction
between the oppositely charged ions causes them to come together
and form a bond. In principle, it is a bond that formed by the
attraction between two oppositely charged ions ion (Hydrogen ions
and Metal ions) in order to strengthen sorptivity, promote
coagulation and accelerate solidification of substance.
3. Applicable Material SC-01-1 It is applicable for high
moisture clay, mud, sludge, soil and waste from sedimentary pond,
municipal sewage, wastewater treatment system and construction
site. After mixing SC-01-1 with substance, the element of substance
will be solidifying within the substance, avoid the secondary
pollution and substance reverts. Structure 2-3 The structure is
non- toxic and general solid after mixing with substance with good
property in water resistance and anti-acid. Rain, temperature and
UV resistance. Durability is 2-3 times than asphalt. Natural
colors, to maintain coordination with nature ecological and
landscape.
4. Main Benefit SC-01-1 3R (//) SC-01-1 is truly Environmental
Friendly 3R Products (Reduce/Reuse/Recycle) with main benefit as
below: 1 . 2 . 3 . 4 . 5 . 6 . 7 . 8 . 9 . 1. Reduce Number of
waste. 2. Reduce Cost of waste disposal and management. 3. Reduce
Handling time of waste disposal and management. 4. Reduce raw
material cost for landscaping , construction, concrete and pavement
products. 5. Reduce environmental impact and pollution. 6. Reduce
of using natural material for better environmental protection. 7.
Reuse the waste as functional material for various products. 8.
Recycle the waste for ecological system improvement. 9. Recycle the
waste to avoid the secondary pollution.
5. Main Application Sludge and Waste Solidification SC-01-1
After mixing SC-01-1 with for high moisture clay, mud, sludge, soil
and waste from sedimentary pond, municipal sewage, wastewater
treatment system and construction site, the substance will be
solidify in short period of time. After solidification, it will be
a dry and solid material for main application as below: 1. ., 2. 3.
() 4. () 5. 6. 1. High moisture content waste dispose such as
sludge and prevent revert in any circumstance. 2. Retaining walls
and ditches the Revetment materials, etc. 3. Aggregate for Roadbed
and Construction site. 4. Mixing material for construction products
such as concrete block and Portland cement. And can landscaping
product. 5. People's Bank of health walks, bike lanes, park plaza,
leisure farms, playgrounds, parking lots. 6. Soil Improvement.
6. Soil Concrete Compressive strength Application (kg/cm2)
Standard Requirements Compressive strength (kg/cm2) (kg/cm2) Soil
Concrete Compressive strength (kg/cm2) Temporary construction roads
2.0(kg/cm2) >>5(kg/cm2) Slope Block 100 >100 Embankment 30
>30 SC-01-1 : When SC-01-1 mixed with cement, the ratio between
dosages and dilute is based on usage and purpose as example below.
Remark: 1.SC-01-1 SC-01-1 curing liquid dosage and soil properties
determines the compressive strength. 2. Different purposes for
different intensity ratios.
7. Construction Guideline: SC-01-1 Construction Overview 1.
2.() SC-01-1 3. 4. 5. 1.Material from construction site dirt,
gravel, waste soil, sludge, and etc. After breaking and filtering
can be used. 2.Put into crusher (crush and loose) then put into the
mixer to mix SC-01 with the cement evenly. 3.Construction pavement
perfusion, bulldozed and compaction. The roadbed underlying must
have good compaction. Wetting the surface with sprinkler, no need
steel mesh, the materia l will integrate closely. 4.Equipment is
easy to obtain, it including excavators, crushers, mixers and etc.
Slightly different from traditional equipment. The company can
offer exclusive broken and mixers and other equipment. 5.No
restriction on construction site and terrain. Packaging and
preservation: SC-01-1 Soil Concrete SC-01-1 is Non-toxic inorganic
liquid, it packaged in plastic buckets in order to facilitate
transport , storage and preservation indefinitely.
8. SC-01-1Project Reference China Guangdong Zhujiang River
Sludge Treatment Remark: 7 47.5kg/cm2 (4.75Mpa) 7 days average
compressive strength of a material: 47.5kg/cm2 (4.75Mpa) 28
82.6kg/cm2 (8.26Mpa) 28 days average compressive strength of a
material: 82.6kg/cm2 (8.26Mpa) After Mixing 7 Days 28 Days
9. Vietnam Mekong River Sludge for Concrete Block Mekong River
waste Soil Management Test Test Piece of Formed Item Waste Soil 20%
Mixing with Cement 20% Filling the waste Soil to case Test case
Result Next day Facility of test
10. Taiwan Yilan Park Way Before After
11. Attached File Taiwan and Vietnam Mekong River Test
Report
12. SC-01-1 CROWNSWEAR the Soil Concrete SC-01-1 is your best
choice Taiwan Head office - Crownswear Enterprise Corporation 7262
2FL. NO.726. WEN LIN ROAD.TAIPEI,TAIWAN,R.O.C Tel886-2-2832-1916
Fax886-2-2832-1917 E-mail:[email protected]
http://www.crownswear.com Crownswear Nanjing Manufacturing Plant -
Crownswear Enterprise Corporation Nanjing 8 NO.8,Tianma Rd., Maqun
Science Park, Nanjing 210049,China. PROC. Tel86-25-84358698
Fax86-25-84365586 Crownswear Vietnam - Crownswear Enterprise
Corporation Vietnam 2145 5 Floor, No.214 Hoang Hoa Tham, Ward 12,
Tan Binh District, HCM City, Vietnam Tel84-8-66855110
Fax84-8-62937939